[PATCH AUTOSEL 5.15 1/9] RDMA/mlx5: Fix fortify source warning while accessing Eth segment

[PATCH AUTOSEL 5.15 1/9] RDMA/mlx5: Fix fortify source warning while accessing Eth segment

[Sasha Levin]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ]

 ------------[ cut here ]------------
 memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
 WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
  [last unloaded: mlx_compat(OE)]
 CPU: 0 PID: 293779 Comm: ssh Tainted: G           OE      6.2.0-32-generic #32~22.04.1-Ubuntu
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
 FS:  00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? show_regs+0x72/0x90
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? __warn+0x8d/0x160
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? report_bug+0x1bb/0x1d0
  ? handle_bug+0x46/0x90
  ? exc_invalid_op+0x19/0x80
  ? asm_exc_invalid_op+0x1b/0x20
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
  ipoib_send+0x2ec/0x770 [ib_ipoib]
  ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
  dev_hard_start_xmit+0x8e/0x1e0
  ? validate_xmit_skb_list+0x4d/0x80
  sch_direct_xmit+0x116/0x3a0
  __dev_xmit_skb+0x1fd/0x580
  __dev_queue_xmit+0x284/0x6b0
  ? _raw_spin_unlock_irq+0xe/0x50
  ? __flush_work.isra.0+0x20d/0x370
  ? push_pseudo_header+0x17/0x40 [ib_ipoib]
  neigh_connected_output+0xcd/0x110
  ip_finish_output2+0x179/0x480
  ? __smp_call_single_queue+0x61/0xa0
  __ip_finish_output+0xc3/0x190
  ip_finish_output+0x2e/0xf0
  ip_output+0x78/0x110
  ? __pfx_ip_finish_output+0x10/0x10
  ip_local_out+0x64/0x70
  __ip_queue_xmit+0x18a/0x460
  ip_queue_xmit+0x15/0x30
  __tcp_transmit_skb+0x914/0x9c0
  tcp_write_xmit+0x334/0x8d0
  tcp_push_one+0x3c/0x60
  tcp_sendmsg_locked+0x2e1/0xac0
  tcp_sendmsg+0x2d/0x50
  inet_sendmsg+0x43/0x90
  sock_sendmsg+0x68/0x80
  sock_write_iter+0x93/0x100
  vfs_write+0x326/0x3c0
  ksys_write+0xbd/0xf0
  ? do_syscall_64+0x69/0x90
  __x64_sys_write+0x19/0x30
  do_syscall_64+0x59/0x90
  ? do_user_addr_fault+0x1d0/0x640
  ? exit_to_user_mode_prepare+0x3b/0xd0
  ? irqentry_exit_to_user_mode+0x9/0x20
  ? irqentry_exit+0x43/0x50
  ? exc_page_fault+0x92/0x1b0
  entry_SYSCALL_64_after_hwframe+0x72/0xdc
 RIP: 0033:0x7fc03ad14a37
 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37
 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003
 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50
  </TASK>
 ---[ end trace 0000000000000000 ]---

Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/wr.c | 2 +-
 include/linux/mlx5/qp.h         | 5 ++++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/wr.c b/drivers/infiniband/hw/mlx5/wr.c
index 8841620af82f1..b81d282fb0d52 100644
--- a/drivers/infiniband/hw/mlx5/wr.c
+++ b/drivers/infiniband/hw/mlx5/wr.c
@@ -128,7 +128,7 @@ static void set_eth_seg(const struct ib_send_wr *wr, struct mlx5_ib_qp *qp,
 		 */
 		copysz = min_t(u64, *cur_edge - (void *)eseg->inline_hdr.start,
 			       left);
-		memcpy(eseg->inline_hdr.start, pdata, copysz);
+		memcpy(eseg->inline_hdr.data, pdata, copysz);
 		stride = ALIGN(sizeof(struct mlx5_wqe_eth_seg) -
 			       sizeof(eseg->inline_hdr.start) + copysz, 16);
 		*size += stride / 16;
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index 61e48d459b23c..693d758f2f1c9 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -261,7 +261,10 @@ struct mlx5_wqe_eth_seg {
 	union {
 		struct {
 			__be16 sz;
-			u8     start[2];
+			union {
+				u8     start[2];
+				DECLARE_FLEX_ARRAY(u8, data);
+			};
 		} inline_hdr;
 		struct {
 			__be16 type;
-- 
2.43.0

[PATCH AUTOSEL 5.15 2/9] RDMA/mlx5: Relax DEVX access upon modify commands

[Sasha Levin]

From: Yishai Hadas <yishaih@nvidia.com>

[ Upstream commit be551ee1574280ef8afbf7c271212ac3e38933ef ]

Relax DEVX access upon modify commands to be UVERBS_ACCESS_READ.

The kernel doesn't need to protect what firmware protects, or what
causes no damage to anyone but the user.

As firmware needs to protect itself from parallel access to the same
object, don't block parallel modify/query commands on the same object in
the kernel side.

This change will allow user space application to run parallel updates to
different entries in the same bulk object.

Tested-by: Tamar Mashiah <tmashiah@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7407d5ed35dc427c1097699e12b49c01e1073406.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/devx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index 104e5cbba066b..ef3585af40263 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -2922,7 +2922,7 @@ DECLARE_UVERBS_NAMED_METHOD(
 	MLX5_IB_METHOD_DEVX_OBJ_MODIFY,
 	UVERBS_ATTR_IDR(MLX5_IB_ATTR_DEVX_OBJ_MODIFY_HANDLE,
 			UVERBS_IDR_ANY_OBJECT,
-			UVERBS_ACCESS_WRITE,
+			UVERBS_ACCESS_READ,
 			UA_MANDATORY),
 	UVERBS_ATTR_PTR_IN(
 		MLX5_IB_ATTR_DEVX_OBJ_MODIFY_CMD_IN,
-- 
2.43.0

[PATCH AUTOSEL 5.15 3/9] riscv: dts: sifive: add missing #interrupt-cells to pmic

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit ce6b6d1513965f500a05f3facf223fa01fd74920 ]

At W=2 dtc complains:
hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider

Add the missing property.

Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index b40990210fb50..3c621f31b5fd2 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -70,6 +70,7 @@ pmic@58 {
 		interrupt-parent = <&gpio>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		regulators {
 			vdd_bcore1: bcore1 {
-- 
2.43.0

[PATCH AUTOSEL 5.15 3/9] riscv: dts: sifive: add missing #interrupt-cells to pmic

[Sasha Levin]

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit ce6b6d1513965f500a05f3facf223fa01fd74920 ]

At W=2 dtc complains:
hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider

Add the missing property.

Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index b40990210fb50..3c621f31b5fd2 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -70,6 +70,7 @@ pmic@58 {
 		interrupt-parent = <&gpio>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		regulators {
 			vdd_bcore1: bcore1 {
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH AUTOSEL 5.15 4/9] x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit ee0e39a63b78849f8abbef268b13e4838569f646 ]

Move is_vsyscall_vaddr() into asm/vsyscall.h to make it available for
copy_from_kernel_nofault_allowed() in arch/x86/mm/maccess.c.

Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/vsyscall.h | 10 ++++++++++
 arch/x86/mm/fault.c             |  9 ---------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
index ab60a71a8dcb9..472f0263dbc61 100644
--- a/arch/x86/include/asm/vsyscall.h
+++ b/arch/x86/include/asm/vsyscall.h
@@ -4,6 +4,7 @@
 
 #include <linux/seqlock.h>
 #include <uapi/asm/vsyscall.h>
+#include <asm/page_types.h>
 
 #ifdef CONFIG_X86_VSYSCALL_EMULATION
 extern void map_vsyscall(void);
@@ -24,4 +25,13 @@ static inline bool emulate_vsyscall(unsigned long error_code,
 }
 #endif
 
+/*
+ * The (legacy) vsyscall page is the long page in the kernel portion
+ * of the address space that has user-accessible permissions.
+ */
+static inline bool is_vsyscall_vaddr(unsigned long vaddr)
+{
+	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
+}
+
 #endif /* _ASM_X86_VSYSCALL_H */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 4bfed53e210ec..abc6fbc3d5f21 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -787,15 +787,6 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 	show_opcodes(regs, loglvl);
 }
 
-/*
- * The (legacy) vsyscall page is the long page in the kernel portion
- * of the address space that has user-accessible permissions.
- */
-static bool is_vsyscall_vaddr(unsigned long vaddr)
-{
-	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
-}
-
 static void
 __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 		       unsigned long address, u32 pkey, int si_code)
-- 
2.43.0

[PATCH AUTOSEL 5.15 5/9] x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit 32019c659ecfe1d92e3bf9fcdfbb11a7c70acd58 ]

When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:

  BUG: unable to handle page fault for address: ffffffffff600000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
  ......
  Call Trace:
   <TASK>
   ? copy_from_kernel_nofault+0x6f/0x110
   bpf_probe_read_kernel+0x1d/0x50
   bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
   trace_call_bpf+0xc5/0x1c0
   perf_call_bpf_enter.isra.0+0x69/0xb0
   perf_syscall_enter+0x13e/0x200
   syscall_trace_enter+0x188/0x1c0
   do_syscall_64+0xb5/0xe0
   entry_SYSCALL_64_after_hwframe+0x6e/0x76
   </TASK>
  ......
  ---[ end trace 0000000000000000 ]---

The oops is triggered when:

1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().

2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.

3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.

Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault().

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/maccess.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c
index 6993f026adec9..42115ac079cfe 100644
--- a/arch/x86/mm/maccess.c
+++ b/arch/x86/mm/maccess.c
@@ -3,6 +3,8 @@
 #include <linux/uaccess.h>
 #include <linux/kernel.h>
 
+#include <asm/vsyscall.h>
+
 #ifdef CONFIG_X86_64
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
@@ -15,6 +17,14 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 	if (vaddr < TASK_SIZE_MAX + PAGE_SIZE)
 		return false;
 
+	/*
+	 * Reading from the vsyscall page may cause an unhandled fault in
+	 * certain cases.  Though it is at an address above TASK_SIZE_MAX, it is
+	 * usually considered as a user space address.
+	 */
+	if (is_vsyscall_vaddr(vaddr))
+		return false;
+
 	/*
 	 * Allow everything during early boot before 'x86_virt_bits'
 	 * is initialized.  Needed for instruction decoding in early
-- 
2.43.0

[PATCH AUTOSEL 5.15 6/9] net/iucv: fix the allocation size of iucv_path_table array

[Sasha Levin]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit b4ea9b6a18ebf7f9f3a7a60f82e925186978cfcf ]

iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/iucv/iucv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 8efc369934fc7..68edefed79f16 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -156,7 +156,7 @@ static char iucv_error_pathid[16] = "INVALID PATHID";
 static LIST_HEAD(iucv_handler_list);
 
 /*
- * iucv_path_table: an array of iucv_path structures.
+ * iucv_path_table: array of pointers to iucv_path structures.
  */
 static struct iucv_path **iucv_path_table;
 static unsigned long iucv_max_pathid;
@@ -544,7 +544,7 @@ static int iucv_enable(void)
 
 	cpus_read_lock();
 	rc = -ENOMEM;
-	alloc_size = iucv_max_pathid * sizeof(struct iucv_path);
+	alloc_size = iucv_max_pathid * sizeof(*iucv_path_table);
 	iucv_path_table = kzalloc(alloc_size, GFP_KERNEL);
 	if (!iucv_path_table)
 		goto out;
-- 
2.43.0

[PATCH AUTOSEL 5.15 7/9] parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check

[Sasha Levin]

From: Max Kellermann <max.kellermann@ionos.com>

[ Upstream commit 250f5402e636a5cec9e0e95df252c3d54307210f ]

Fixes a bug revealed by -Wmissing-prototypes when
CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:

 arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes]
    82 | int ftrace_enable_ftrace_graph_caller(void)
       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes]
    88 | int ftrace_disable_ftrace_graph_caller(void)
       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index 0a1e75af5382d..44d70fc30aae5 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -81,7 +81,7 @@ void notrace __hot ftrace_function_trampoline(unsigned long parent,
 #endif
 }
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER)
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.15 8/9] block: sed-opal: handle empty atoms when parsing response

[Sasha Levin]

From: Greg Joyce <gjoyce@linux.ibm.com>

[ Upstream commit 5429c8de56f6b2bd8f537df3a1e04e67b9c04282 ]

The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.

Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/opal_proto.h | 1 +
 block/sed-opal.c   | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/block/opal_proto.h b/block/opal_proto.h
index b486b3ec7dc41..a50191bddbc26 100644
--- a/block/opal_proto.h
+++ b/block/opal_proto.h
@@ -66,6 +66,7 @@ enum opal_response_token {
 #define SHORT_ATOM_BYTE  0xBF
 #define MEDIUM_ATOM_BYTE 0xDF
 #define LONG_ATOM_BYTE   0xE3
+#define EMPTY_ATOM_BYTE  0xFF
 
 #define OPAL_INVAL_PARAM 12
 #define OPAL_MANUFACTURED_INACTIVE 0x08
diff --git a/block/sed-opal.c b/block/sed-opal.c
index 0ac5a4f3f2261..00e4d23ac49e7 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -895,16 +895,20 @@ static int response_parse(const u8 *buf, size_t length,
 			token_length = response_parse_medium(iter, pos);
 		else if (pos[0] <= LONG_ATOM_BYTE) /* long atom */
 			token_length = response_parse_long(iter, pos);
+		else if (pos[0] == EMPTY_ATOM_BYTE) /* empty atom */
+			token_length = 1;
 		else /* TOKEN */
 			token_length = response_parse_token(iter, pos);
 
 		if (token_length < 0)
 			return token_length;
 
+		if (pos[0] != EMPTY_ATOM_BYTE)
+			num_entries++;
+
 		pos += token_length;
 		total -= token_length;
 		iter++;
-		num_entries++;
 	}
 
 	resp->num = num_entries;
-- 
2.43.0

[PATCH AUTOSEL 5.15 9/9] dm-verity, dm-crypt: align "struct bvec_iter" correctly

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 787f1b2800464aa277236a66eb3c279535edd460 ]

"struct bvec_iter" is defined with the __packed attribute, so it is
aligned on a single byte. On X86 (and on other architectures that support
unaligned addresses in hardware), "struct bvec_iter" is accessed using the
8-byte and 4-byte memory instructions, however these instructions are less
efficient if they operate on unaligned addresses.

(on RISC machines that don't have unaligned access in hardware, GCC
generates byte-by-byte accesses that are very inefficient - see [1])

This commit reorders the entries in "struct dm_verity_io" and "struct
convert_context", so that "struct bvec_iter" is aligned on 8 bytes.

[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-crypt.c  | 4 ++--
 drivers/md/dm-verity.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index a428770102a37..edb70cacd805d 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -49,11 +49,11 @@
 struct convert_context {
 	struct completion restart;
 	struct bio *bio_in;
-	struct bio *bio_out;
 	struct bvec_iter iter_in;
+	struct bio *bio_out;
 	struct bvec_iter iter_out;
-	u64 cc_sector;
 	atomic_t cc_pending;
+	u64 cc_sector;
 	union {
 		struct skcipher_request *req;
 		struct aead_request *req_aead;
diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h
index 78d1e51195ada..f61c89c79cf5b 100644
--- a/drivers/md/dm-verity.h
+++ b/drivers/md/dm-verity.h
@@ -74,11 +74,11 @@ struct dm_verity_io {
 	/* original value of bio->bi_end_io */
 	bio_end_io_t *orig_bi_end_io;
 
+	struct bvec_iter iter;
+
 	sector_t block;
 	unsigned n_blocks;
 
-	struct bvec_iter iter;
-
 	struct work_struct work;
 
 	/*
-- 
2.43.0

Re: [PATCH AUTOSEL 5.15 5/9] x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()

[Guilherme G. Piccoli]

Hi Sasha et. al.,

thanks for this backport! I'm not sure how common is to send a Tested-by
to stable in these cases, but since I tested this one anyway, given that
I was working with this syzkaller report...feel free to add my:


Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # v5.15.y

Cheers,


Guilherme