[PATCH 3/3] net: phy: mediatek-ge: do not disable EEE advertisement

["Arınç ÜNAL" <arinc.unal@arinc9.com>]

There's no need to disable Energy-Efficient Ethernet (EEE) advertisement on
the MT7530 and MT7531 switch PHYs. EEE works fine on MT7530 and MT7531
switch PHYs. Remove the code where EEE advertisement is disabled.

This is a bugfix because there's a possible race condition where the
mediatek-ge driver would kick in after the MT7530 DSA subdriver which would
have EEE disabled until manually enabled.

Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/phy/mediatek-ge.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/phy/mediatek-ge.c b/drivers/net/phy/mediatek-ge.c
index a493ae01b267..54ea64a37ab3 100644
--- a/drivers/net/phy/mediatek-ge.c
+++ b/drivers/net/phy/mediatek-ge.c
@@ -23,9 +23,6 @@ static int mtk_gephy_write_page(struct phy_device *phydev, int page)
 
 static void mtk_gephy_config_init(struct phy_device *phydev)
 {
-	/* Disable EEE */
-	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-
 	/* Enable HW auto downshift */
 	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
 

-- 
2.40.1