All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthijs Kooijman <matthijs@stdin.nl>
To: Haojian Zhuang <haojian.zhuang@linaro.org>,
	Tony Lindgren <tony@atomide.com>
Cc: linux-gpio@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-omap@vger.kernel.org, Matthijs Kooijman <matthijs@stdin.nl>
Subject: [PATCH] pinctrl: single: Fix PIN_CONFIG_BIAS_DISABLE handling
Date: Tue, 19 Mar 2024 12:06:34 +0100	[thread overview]
Message-ID: <20240319110633.230329-1-matthijs@stdin.nl> (raw)
In-Reply-To: <Zflxi8SCzzouP9zW@login.tika.stderr.nl>

The pinctrl-single driver handles pin_config_set by looking up the
requested setting in a DT-defined lookup table, which defines what bits
correspond to each setting. There is no way to add
PIN_CONFIG_BIAS_DISABLE entries to the table, since there is instead
code to disable the bias by applying the disable values of both the
pullup and pulldown entries in the table.

However, this code is inside the table-lookup loop, so it would only
execute if there is an entry for PIN_CONFIG_BIAS_DISABLE in the table,
which can never exist, so this code never runs.

This commit lifts the offending code out of the loop, so it just
executes directly whenever PIN_CONFIG_BIAS_DISABLE is requested,
skippipng the table lookup loop.

This also introduces a new `param` variable to make the code slightly
more readable.

This bug seems to have existed when this code was first merged in commit
9dddb4df90d13 ("pinctrl: single: support generic pinconf"). Earlier
versions of this patch did have an entry for PIN_CONFIG_BIAS_DISABLE in
the lookup table, but that was removed, which is probably how this bug
was introduced.

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
---
 drivers/pinctrl/pinctrl-single.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 19cc0db771a5a..c7a03b63fa812 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -554,21 +554,30 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
 	unsigned offset = 0, shift = 0, i, data, ret;
 	u32 arg;
 	int j;
+	enum pin_config_param param;
 
 	ret = pcs_get_function(pctldev, pin, &func);
 	if (ret)
 		return ret;
 
 	for (j = 0; j < num_configs; j++) {
+		param = pinconf_to_config_param(configs[j]);
+
+		/* BIAS_DISABLE has no entry in the func->conf table */
+		if (param == PIN_CONFIG_BIAS_DISABLE) {
+			/* This just disables all bias entries */
+			pcs_pinconf_clear_bias(pctldev, pin);
+			continue;
+		}
+
 		for (i = 0; i < func->nconfs; i++) {
-			if (pinconf_to_config_param(configs[j])
-				!= func->conf[i].param)
+			if (param != func->conf[i].param)
 				continue;
 
 			offset = pin * (pcs->width / BITS_PER_BYTE);
 			data = pcs->read(pcs->base + offset);
 			arg = pinconf_to_config_argument(configs[j]);
-			switch (func->conf[i].param) {
+			switch (param) {
 			/* 2 parameters */
 			case PIN_CONFIG_INPUT_SCHMITT:
 			case PIN_CONFIG_DRIVE_STRENGTH:
@@ -580,9 +589,6 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
 				data |= (arg << shift) & func->conf[i].mask;
 				break;
 			/* 4 parameters */
-			case PIN_CONFIG_BIAS_DISABLE:
-				pcs_pinconf_clear_bias(pctldev, pin);
-				break;
 			case PIN_CONFIG_BIAS_PULL_DOWN:
 			case PIN_CONFIG_BIAS_PULL_UP:
 				if (arg)
-- 
2.40.1


  reply	other threads:[~2024-03-19 11:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-28 12:04 pinctrl: single: Cannot disable bias - PIN_CONFIG_BIAS_DISABLE not handled Matthijs Kooijman
2024-02-29  7:32 ` Tony Lindgren
2024-02-29 18:31   ` Nathan Chancellor
2024-02-29 19:07     ` Matthijs Kooijman
2024-03-01 10:04     ` Tony Lindgren
2024-03-19 11:05   ` Matthijs Kooijman
2024-03-19 11:06     ` Matthijs Kooijman [this message]
2024-03-28 21:02       ` [PATCH] pinctrl: single: Fix PIN_CONFIG_BIAS_DISABLE handling Linus Walleij
2024-04-03  8:59         ` Tony Lindgren
2024-03-29  2:05       ` Haojian Zhuang
2024-04-04 12:00       ` Linus Walleij
2024-03-22  6:24     ` pinctrl: single: Cannot disable bias - PIN_CONFIG_BIAS_DISABLE not handled Tony Lindgren
2024-03-29  2:06       ` Haojian Zhuang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240319110633.230329-1-matthijs@stdin.nl \
    --to=matthijs@stdin.nl \
    --cc=haojian.zhuang@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.