From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@kernel.org> To: dmaengine@vger.kernel.org Cc: Vinod Koul <vkoul@kernel.org>, Lars-Peter Clausen <lars@metafoo.de>, Nuno Sa <nuno.sa@analog.com> Subject: [PATCH RESEND v3 2/2] dmaengine: axi-dmac: move to device managed probe Date: Thu, 28 Mar 2024 14:58:51 +0100 [thread overview] Message-ID: <20240328-axi-dmac-devm-probe-v3-2-523c0176df70@analog.com> (raw) In-Reply-To: <20240328-axi-dmac-devm-probe-v3-0-523c0176df70@analog.com> From: Nuno Sa <nuno.sa@analog.com> In axi_dmac_probe(), there's a mix in using device managed APIs and explicitly cleaning things in the driver .remove() hook. Move to use device managed APIs and thus drop the .remove() hook. Signed-off-by: Nuno Sa <nuno.sa@analog.com> --- drivers/dma/dma-axi-dmac.c | 78 ++++++++++++++++++++-------------------------- 1 file changed, 34 insertions(+), 44 deletions(-) diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c index d5a33e4a91b1..bdb752f11869 100644 --- a/drivers/dma/dma-axi-dmac.c +++ b/drivers/dma/dma-axi-dmac.c @@ -1002,6 +1002,16 @@ static int axi_dmac_detect_caps(struct axi_dmac *dmac, unsigned int version) return 0; } +static void axi_dmac_tasklet_kill(void *task) +{ + tasklet_kill(task); +} + +static void axi_dmac_free_dma_controller(void *of_node) +{ + of_dma_controller_free(of_node); +} + static int axi_dmac_probe(struct platform_device *pdev) { struct dma_device *dma_dev; @@ -1025,14 +1035,10 @@ static int axi_dmac_probe(struct platform_device *pdev) if (IS_ERR(dmac->base)) return PTR_ERR(dmac->base); - dmac->clk = devm_clk_get(&pdev->dev, NULL); + dmac->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(dmac->clk)) return PTR_ERR(dmac->clk); - ret = clk_prepare_enable(dmac->clk); - if (ret < 0) - return ret; - version = axi_dmac_read(dmac, ADI_AXI_REG_VERSION); if (version >= ADI_AXI_PCORE_VER(4, 3, 'a')) @@ -1041,7 +1047,7 @@ static int axi_dmac_probe(struct platform_device *pdev) ret = axi_dmac_parse_dt(&pdev->dev, dmac); if (ret < 0) - goto err_clk_disable; + return ret; INIT_LIST_HEAD(&dmac->chan.active_descs); @@ -1072,7 +1078,7 @@ static int axi_dmac_probe(struct platform_device *pdev) ret = axi_dmac_detect_caps(dmac, version); if (ret) - goto err_clk_disable; + return ret; dma_dev->copy_align = (dmac->chan.address_align_mask + 1); @@ -1088,57 +1094,42 @@ static int axi_dmac_probe(struct platform_device *pdev) !AXI_DMAC_DST_COHERENT_GET(ret)) { dev_err(dmac->dma_dev.dev, "Coherent DMA not supported in hardware"); - ret = -EINVAL; - goto err_clk_disable; + return -EINVAL; } } - ret = dma_async_device_register(dma_dev); + ret = dmaenginem_async_device_register(dma_dev); if (ret) - goto err_clk_disable; + return ret; + + /* + * Put the action in here so it get's done before unregistering the DMA + * device. + */ + ret = devm_add_action_or_reset(&pdev->dev, axi_dmac_tasklet_kill, + &dmac->chan.vchan.task); + if (ret) + return ret; ret = of_dma_controller_register(pdev->dev.of_node, of_dma_xlate_by_chan_id, dma_dev); if (ret) - goto err_unregister_device; + return ret; - ret = request_irq(dmac->irq, axi_dmac_interrupt_handler, IRQF_SHARED, - dev_name(&pdev->dev), dmac); + ret = devm_add_action_or_reset(&pdev->dev, axi_dmac_free_dma_controller, + pdev->dev.of_node); if (ret) - goto err_unregister_of; + return ret; - platform_set_drvdata(pdev, dmac); + ret = devm_request_irq(&pdev->dev, dmac->irq, axi_dmac_interrupt_handler, + IRQF_SHARED, dev_name(&pdev->dev), dmac); + if (ret) + return ret; regmap = devm_regmap_init_mmio(&pdev->dev, dmac->base, &axi_dmac_regmap_config); - if (IS_ERR(regmap)) { - ret = PTR_ERR(regmap); - goto err_free_irq; - } - return 0; - -err_free_irq: - free_irq(dmac->irq, dmac); -err_unregister_of: - of_dma_controller_free(pdev->dev.of_node); -err_unregister_device: - dma_async_device_unregister(&dmac->dma_dev); -err_clk_disable: - clk_disable_unprepare(dmac->clk); - - return ret; -} - -static void axi_dmac_remove(struct platform_device *pdev) -{ - struct axi_dmac *dmac = platform_get_drvdata(pdev); - - free_irq(dmac->irq, dmac); - of_dma_controller_free(pdev->dev.of_node); - tasklet_kill(&dmac->chan.vchan.task); - dma_async_device_unregister(&dmac->dma_dev); - clk_disable_unprepare(dmac->clk); + return PTR_ERR_OR_ZERO(regmap); } static const struct of_device_id axi_dmac_of_match_table[] = { @@ -1153,7 +1144,6 @@ static struct platform_driver axi_dmac_driver = { .of_match_table = axi_dmac_of_match_table, }, .probe = axi_dmac_probe, - .remove_new = axi_dmac_remove, }; module_platform_driver(axi_dmac_driver); -- 2.44.0
WARNING: multiple messages have this Message-ID (diff)
From: Nuno Sa <nuno.sa@analog.com> To: dmaengine@vger.kernel.org Cc: Vinod Koul <vkoul@kernel.org>, Lars-Peter Clausen <lars@metafoo.de>, Nuno Sa <nuno.sa@analog.com> Subject: [PATCH RESEND v3 2/2] dmaengine: axi-dmac: move to device managed probe Date: Thu, 28 Mar 2024 14:58:51 +0100 [thread overview] Message-ID: <20240328-axi-dmac-devm-probe-v3-2-523c0176df70@analog.com> (raw) In-Reply-To: <20240328-axi-dmac-devm-probe-v3-0-523c0176df70@analog.com> In axi_dmac_probe(), there's a mix in using device managed APIs and explicitly cleaning things in the driver .remove() hook. Move to use device managed APIs and thus drop the .remove() hook. Signed-off-by: Nuno Sa <nuno.sa@analog.com> --- drivers/dma/dma-axi-dmac.c | 78 ++++++++++++++++++++-------------------------- 1 file changed, 34 insertions(+), 44 deletions(-) diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c index d5a33e4a91b1..bdb752f11869 100644 --- a/drivers/dma/dma-axi-dmac.c +++ b/drivers/dma/dma-axi-dmac.c @@ -1002,6 +1002,16 @@ static int axi_dmac_detect_caps(struct axi_dmac *dmac, unsigned int version) return 0; } +static void axi_dmac_tasklet_kill(void *task) +{ + tasklet_kill(task); +} + +static void axi_dmac_free_dma_controller(void *of_node) +{ + of_dma_controller_free(of_node); +} + static int axi_dmac_probe(struct platform_device *pdev) { struct dma_device *dma_dev; @@ -1025,14 +1035,10 @@ static int axi_dmac_probe(struct platform_device *pdev) if (IS_ERR(dmac->base)) return PTR_ERR(dmac->base); - dmac->clk = devm_clk_get(&pdev->dev, NULL); + dmac->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(dmac->clk)) return PTR_ERR(dmac->clk); - ret = clk_prepare_enable(dmac->clk); - if (ret < 0) - return ret; - version = axi_dmac_read(dmac, ADI_AXI_REG_VERSION); if (version >= ADI_AXI_PCORE_VER(4, 3, 'a')) @@ -1041,7 +1047,7 @@ static int axi_dmac_probe(struct platform_device *pdev) ret = axi_dmac_parse_dt(&pdev->dev, dmac); if (ret < 0) - goto err_clk_disable; + return ret; INIT_LIST_HEAD(&dmac->chan.active_descs); @@ -1072,7 +1078,7 @@ static int axi_dmac_probe(struct platform_device *pdev) ret = axi_dmac_detect_caps(dmac, version); if (ret) - goto err_clk_disable; + return ret; dma_dev->copy_align = (dmac->chan.address_align_mask + 1); @@ -1088,57 +1094,42 @@ static int axi_dmac_probe(struct platform_device *pdev) !AXI_DMAC_DST_COHERENT_GET(ret)) { dev_err(dmac->dma_dev.dev, "Coherent DMA not supported in hardware"); - ret = -EINVAL; - goto err_clk_disable; + return -EINVAL; } } - ret = dma_async_device_register(dma_dev); + ret = dmaenginem_async_device_register(dma_dev); if (ret) - goto err_clk_disable; + return ret; + + /* + * Put the action in here so it get's done before unregistering the DMA + * device. + */ + ret = devm_add_action_or_reset(&pdev->dev, axi_dmac_tasklet_kill, + &dmac->chan.vchan.task); + if (ret) + return ret; ret = of_dma_controller_register(pdev->dev.of_node, of_dma_xlate_by_chan_id, dma_dev); if (ret) - goto err_unregister_device; + return ret; - ret = request_irq(dmac->irq, axi_dmac_interrupt_handler, IRQF_SHARED, - dev_name(&pdev->dev), dmac); + ret = devm_add_action_or_reset(&pdev->dev, axi_dmac_free_dma_controller, + pdev->dev.of_node); if (ret) - goto err_unregister_of; + return ret; - platform_set_drvdata(pdev, dmac); + ret = devm_request_irq(&pdev->dev, dmac->irq, axi_dmac_interrupt_handler, + IRQF_SHARED, dev_name(&pdev->dev), dmac); + if (ret) + return ret; regmap = devm_regmap_init_mmio(&pdev->dev, dmac->base, &axi_dmac_regmap_config); - if (IS_ERR(regmap)) { - ret = PTR_ERR(regmap); - goto err_free_irq; - } - return 0; - -err_free_irq: - free_irq(dmac->irq, dmac); -err_unregister_of: - of_dma_controller_free(pdev->dev.of_node); -err_unregister_device: - dma_async_device_unregister(&dmac->dma_dev); -err_clk_disable: - clk_disable_unprepare(dmac->clk); - - return ret; -} - -static void axi_dmac_remove(struct platform_device *pdev) -{ - struct axi_dmac *dmac = platform_get_drvdata(pdev); - - free_irq(dmac->irq, dmac); - of_dma_controller_free(pdev->dev.of_node); - tasklet_kill(&dmac->chan.vchan.task); - dma_async_device_unregister(&dmac->dma_dev); - clk_disable_unprepare(dmac->clk); + return PTR_ERR_OR_ZERO(regmap); } static const struct of_device_id axi_dmac_of_match_table[] = { @@ -1153,7 +1144,6 @@ static struct platform_driver axi_dmac_driver = { .of_match_table = axi_dmac_of_match_table, }, .probe = axi_dmac_probe, - .remove_new = axi_dmac_remove, }; module_platform_driver(axi_dmac_driver); -- 2.44.0
next prev parent reply other threads:[~2024-03-28 13:58 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-28 13:58 [PATCH RESEND v3 0/2] dmaengine: axi-dmac: move to device managed probe Nuno Sa via B4 Relay 2024-03-28 13:58 ` Nuno Sa 2024-03-28 13:58 ` [PATCH RESEND v3 1/2] dmaengine: axi-dmac: fix possible race in remove() Nuno Sa via B4 Relay 2024-03-28 13:58 ` Nuno Sa 2024-03-28 13:58 ` Nuno Sa via B4 Relay [this message] 2024-03-28 13:58 ` [PATCH RESEND v3 2/2] dmaengine: axi-dmac: move to device managed probe Nuno Sa 2024-04-07 16:39 ` [PATCH RESEND v3 0/2] " Vinod Koul -- strict thread matches above, loose matches on Subject: below -- 2024-02-29 16:23 Nuno Sa 2024-02-29 16:23 ` [PATCH RESEND v3 2/2] " Nuno Sa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240328-axi-dmac-devm-probe-v3-2-523c0176df70@analog.com \ --to=devnull+nuno.sa.analog.com@kernel.org \ --cc=dmaengine@vger.kernel.org \ --cc=lars@metafoo.de \ --cc=nuno.sa@analog.com \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.