* [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-03-28 19:12 ` Robert Nelson 0 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:12 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Robert Nelson, Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri This board is based on ti,j722s https://beagley-ai.org/ https://openbeagle.org/beagley-ai/beagley-ai Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Rob Herring <robh@kernel.org> CC: Nishanth Menon <nm@ti.com> CC: Jared McArthur <j-mcarthur@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Deepak Khatri <lorforlinux@beagleboard.org> --- Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 52b51fd7044e..ca23b7e6a35e 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -134,6 +134,7 @@ properties: - description: K3 J722S SoC and Boards items: - enum: + - beagle,j722s-beagley-ai - ti,j722s-evm - const: ti,j722s -- 2.39.2 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-03-28 19:12 ` Robert Nelson 0 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:12 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Robert Nelson, Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri This board is based on ti,j722s https://beagley-ai.org/ https://openbeagle.org/beagley-ai/beagley-ai Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Rob Herring <robh@kernel.org> CC: Nishanth Menon <nm@ti.com> CC: Jared McArthur <j-mcarthur@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Deepak Khatri <lorforlinux@beagleboard.org> --- Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 52b51fd7044e..ca23b7e6a35e 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -134,6 +134,7 @@ properties: - description: K3 J722S SoC and Boards items: - enum: + - beagle,j722s-beagley-ai - ti,j722s-evm - const: ti,j722s -- 2.39.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai 2024-03-28 19:12 ` Robert Nelson @ 2024-03-28 19:12 ` Robert Nelson -1 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:12 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Robert Nelson, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri BeagleBoard.org BeagleY-AI is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM67A, which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 cores for low-power, low-latency GPIO control. https://beagley-ai.org/ https://openbeagle.org/beagley-ai/beagley-ai Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Nishanth Menon <nm@ti.com> CC: Jared McArthur <j-mcarthur@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Deepak Khatri <lorforlinux@beagleboard.org> --- arch/arm64/boot/dts/ti/Makefile | 1 + .../arm64/boot/dts/ti/k3-j722s-beagley-ai.dts | 373 ++++++++++++++++++ 2 files changed, 374 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 9a722c2473fb..c76b41f86527 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-j722s-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoC diff --git a/arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts new file mode 100644 index 000000000000..a6e5a4243bef --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * https://beagley-ai.org/ + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "beagle,j722s-beagley-ai", "ti,j722s"; + model = "BeagleBoard.org BeagleY-AI"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-mmc1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-TLV71033 { + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + vsys_io_1v8: regulator-vsys-io-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-vsys-io-1v2 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ + >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default { + pinctrl-single,pins = < + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >; + }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>, <&gbe_pmx_obsclk>; + + assigned-clocks = <&k3_clks 227 0>; + assigned-clock-parents = <&k3_clks 227 6>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; + bootph-all; +}; + +&mcu_pmx0 { + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; + + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (A10) MCU_SPI0_CS1.MCU_OBSCLK0 */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; + bootph-all; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + bootph-all; + + tps65219: pmic@30 { + bootph-all; + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + //Regulator is left as is unused. + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_PHY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDDA_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; + status = "okay"; + bootph-all; +}; -- 2.39.2 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai @ 2024-03-28 19:12 ` Robert Nelson 0 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:12 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Robert Nelson, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri BeagleBoard.org BeagleY-AI is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM67A, which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 cores for low-power, low-latency GPIO control. https://beagley-ai.org/ https://openbeagle.org/beagley-ai/beagley-ai Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Nishanth Menon <nm@ti.com> CC: Jared McArthur <j-mcarthur@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Deepak Khatri <lorforlinux@beagleboard.org> --- arch/arm64/boot/dts/ti/Makefile | 1 + .../arm64/boot/dts/ti/k3-j722s-beagley-ai.dts | 373 ++++++++++++++++++ 2 files changed, 374 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 9a722c2473fb..c76b41f86527 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-j722s-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoC diff --git a/arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts new file mode 100644 index 000000000000..a6e5a4243bef --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dts @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * https://beagley-ai.org/ + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "beagle,j722s-beagley-ai", "ti,j722s"; + model = "BeagleBoard.org BeagleY-AI"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-mmc1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-TLV71033 { + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + vsys_io_1v8: regulator-vsys-io-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-vsys-io-1v2 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ + >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default { + pinctrl-single,pins = < + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >; + }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>, <&gbe_pmx_obsclk>; + + assigned-clocks = <&k3_clks 227 0>; + assigned-clock-parents = <&k3_clks 227 6>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; + bootph-all; +}; + +&mcu_pmx0 { + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; + + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (A10) MCU_SPI0_CS1.MCU_OBSCLK0 */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; + bootph-all; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + bootph-all; + + tps65219: pmic@30 { + bootph-all; + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + //Regulator is left as is unused. + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_PHY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDDA_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; + status = "okay"; + bootph-all; +}; -- 2.39.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai 2024-03-28 19:12 ` Robert Nelson @ 2024-03-28 19:15 ` Robert Nelson -1 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:15 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On Thu, Mar 28, 2024 at 2:12 PM Robert Nelson <robertcnelson@gmail.com> wrote: > > BeagleBoard.org BeagleY-AI is an easy to use, affordable open source > hardware single board computer based on the Texas Instruments AM67A, > which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose > digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), > GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 > cores for low-power, low-latency GPIO control. > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai @Jason Kridner we need this to become public when you are ready ^ ;) Boot log: https://gist.github.com/RobertCNelson/9db8ea04848e7ce2ca52c038fab0e1b7 -- Robert Nelson https://rcn-ee.com/ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai @ 2024-03-28 19:15 ` Robert Nelson 0 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:15 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On Thu, Mar 28, 2024 at 2:12 PM Robert Nelson <robertcnelson@gmail.com> wrote: > > BeagleBoard.org BeagleY-AI is an easy to use, affordable open source > hardware single board computer based on the Texas Instruments AM67A, > which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose > digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), > GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 > cores for low-power, low-latency GPIO control. > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai @Jason Kridner we need this to become public when you are ready ^ ;) Boot log: https://gist.github.com/RobertCNelson/9db8ea04848e7ce2ca52c038fab0e1b7 -- Robert Nelson https://rcn-ee.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai 2024-03-28 19:15 ` Robert Nelson @ 2024-03-28 19:26 ` Jason Kridner -1 siblings, 0 replies; 24+ messages in thread From: Jason Kridner @ 2024-03-28 19:26 UTC (permalink / raw) To: Robert Nelson Cc: linux-arm-kernel, linux-kernel, devicetree, Nishanth Menon, Jared McArthur, Deepak Khatri > On Mar 28, 2024, at 9:16 AM, Robert Nelson <robertcnelson@gmail.com> wrote: > > On Thu, Mar 28, 2024 at 2:12 PM Robert Nelson <robertcnelson@gmail.com> wrote: >> >> BeagleBoard.org BeagleY-AI is an easy to use, affordable open source >> hardware single board computer based on the Texas Instruments AM67A, >> which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose >> digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), >> GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 >> cores for low-power, low-latency GPIO control. >> >> https://beagley-ai.org/ >> https://openbeagle.org/beagley-ai/beagley-ai > > @Jason Kridner we need this to become public when you are ready ^ ;) > Did I mess up? Should already be public. We should make a github.com mirror though for up-time/visibility/bandwidth. > Boot log: > > https://gist.github.com/RobertCNelson/9db8ea04848e7ce2ca52c038fab0e1b7 > > -- > Robert Nelson > https://rcn-ee.com/ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai @ 2024-03-28 19:26 ` Jason Kridner 0 siblings, 0 replies; 24+ messages in thread From: Jason Kridner @ 2024-03-28 19:26 UTC (permalink / raw) To: Robert Nelson Cc: linux-arm-kernel, linux-kernel, devicetree, Nishanth Menon, Jared McArthur, Deepak Khatri > On Mar 28, 2024, at 9:16 AM, Robert Nelson <robertcnelson@gmail.com> wrote: > > On Thu, Mar 28, 2024 at 2:12 PM Robert Nelson <robertcnelson@gmail.com> wrote: >> >> BeagleBoard.org BeagleY-AI is an easy to use, affordable open source >> hardware single board computer based on the Texas Instruments AM67A, >> which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose >> digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), >> GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 >> cores for low-power, low-latency GPIO control. >> >> https://beagley-ai.org/ >> https://openbeagle.org/beagley-ai/beagley-ai > > @Jason Kridner we need this to become public when you are ready ^ ;) > Did I mess up? Should already be public. We should make a github.com mirror though for up-time/visibility/bandwidth. > Boot log: > > https://gist.github.com/RobertCNelson/9db8ea04848e7ce2ca52c038fab0e1b7 > > -- > Robert Nelson > https://rcn-ee.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai 2024-03-28 19:26 ` Jason Kridner @ 2024-03-28 19:37 ` Robert Nelson -1 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:37 UTC (permalink / raw) To: Jason Kridner Cc: linux-arm-kernel, linux-kernel, devicetree, Nishanth Menon, Jared McArthur, Deepak Khatri On Thu, Mar 28, 2024 at 2:26 PM Jason Kridner <jkridner@beagleboard.org> wrote: > > > > > On Mar 28, 2024, at 9:16 AM, Robert Nelson <robertcnelson@gmail.com> wrote: > > > > On Thu, Mar 28, 2024 at 2:12 PM Robert Nelson <robertcnelson@gmail.com> wrote: > >> > >> BeagleBoard.org BeagleY-AI is an easy to use, affordable open source > >> hardware single board computer based on the Texas Instruments AM67A, > >> which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose > >> digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), > >> GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 > >> cores for low-power, low-latency GPIO control. > >> > >> https://beagley-ai.org/ > >> https://openbeagle.org/beagley-ai/beagley-ai > > > > @Jason Kridner we need this to become public when you are ready ^ ;) > > > > Did I mess up? Should already be public. We should make a github.com mirror though for up-time/visibility/bandwidth. Thanks Jason, it seems to work in incognito mode now, so we are good! Regards, -- Robert Nelson https://rcn-ee.com/ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai @ 2024-03-28 19:37 ` Robert Nelson 0 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-03-28 19:37 UTC (permalink / raw) To: Jason Kridner Cc: linux-arm-kernel, linux-kernel, devicetree, Nishanth Menon, Jared McArthur, Deepak Khatri On Thu, Mar 28, 2024 at 2:26 PM Jason Kridner <jkridner@beagleboard.org> wrote: > > > > > On Mar 28, 2024, at 9:16 AM, Robert Nelson <robertcnelson@gmail.com> wrote: > > > > On Thu, Mar 28, 2024 at 2:12 PM Robert Nelson <robertcnelson@gmail.com> wrote: > >> > >> BeagleBoard.org BeagleY-AI is an easy to use, affordable open source > >> hardware single board computer based on the Texas Instruments AM67A, > >> which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose > >> digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), > >> GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 > >> cores for low-power, low-latency GPIO control. > >> > >> https://beagley-ai.org/ > >> https://openbeagle.org/beagley-ai/beagley-ai > > > > @Jason Kridner we need this to become public when you are ready ^ ;) > > > > Did I mess up? Should already be public. We should make a github.com mirror though for up-time/visibility/bandwidth. Thanks Jason, it seems to work in incognito mode now, so we are good! Regards, -- Robert Nelson https://rcn-ee.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-03-28 19:12 ` Robert Nelson @ 2024-03-28 21:01 ` Rob Herring -1 siblings, 0 replies; 24+ messages in thread From: Rob Herring @ 2024-03-28 21:01 UTC (permalink / raw) To: Robert Nelson Cc: Jared McArthur, Jason Kridner, linux-arm-kernel, devicetree, Nishanth Menon, Deepak Khatri, linux-kernel On Thu, 28 Mar 2024 14:12:04 -0500, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y ti/k3-j722s-beagley-ai.dtb' for 20240328191205.82295-1-robertcnelson@gmail.com: arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dtb: pinctrl@f4000: 'vdd-3v3-sd-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-03-28 21:01 ` Rob Herring 0 siblings, 0 replies; 24+ messages in thread From: Rob Herring @ 2024-03-28 21:01 UTC (permalink / raw) To: Robert Nelson Cc: Jared McArthur, Jason Kridner, linux-arm-kernel, devicetree, Nishanth Menon, Deepak Khatri, linux-kernel On Thu, 28 Mar 2024 14:12:04 -0500, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y ti/k3-j722s-beagley-ai.dtb' for 20240328191205.82295-1-robertcnelson@gmail.com: arch/arm64/boot/dts/ti/k3-j722s-beagley-ai.dtb: pinctrl@f4000: 'vdd-3v3-sd-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-03-28 19:12 ` Robert Nelson @ 2024-04-02 13:43 ` Rob Herring -1 siblings, 0 replies; 24+ messages in thread From: Rob Herring @ 2024-04-02 13:43 UTC (permalink / raw) To: Robert Nelson Cc: Jason Kridner, linux-arm-kernel, Nishanth Menon, linux-kernel, Jared McArthur, devicetree, Deepak Khatri On Thu, 28 Mar 2024 14:12:04 -0500, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-04-02 13:43 ` Rob Herring 0 siblings, 0 replies; 24+ messages in thread From: Rob Herring @ 2024-04-02 13:43 UTC (permalink / raw) To: Robert Nelson Cc: Jason Kridner, linux-arm-kernel, Nishanth Menon, linux-kernel, Jared McArthur, devicetree, Deepak Khatri On Thu, 28 Mar 2024 14:12:04 -0500, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-03-28 19:12 ` Robert Nelson @ 2024-04-09 19:41 ` Nishanth Menon -1 siblings, 0 replies; 24+ messages in thread From: Nishanth Menon @ 2024-04-09 19:41 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree, Robert Nelson Cc: Nishanth Menon, Rob Herring, Jared McArthur, Jason Kridner, Deepak Khatri Hi Robert Nelson, On Thu, 28 Mar 2024 14:12:04 -0500, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Robert, I did a couple of sync as part of rebase - but for the future, please be aware of [2] I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/2] dt-bindings: arm: ti: Add BeagleY-AI commit: d2b3e3b544d7e657406db3bdcdc296f02f4f07c9 [2/2] arm64: dts: ti: Add k3-j722s-beagley-ai commit: f6a61274cc851e1dbae82b5fa2d3e7087dccf85b All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git [2] https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-04-09 19:41 ` Nishanth Menon 0 siblings, 0 replies; 24+ messages in thread From: Nishanth Menon @ 2024-04-09 19:41 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree, Robert Nelson Cc: Nishanth Menon, Rob Herring, Jared McArthur, Jason Kridner, Deepak Khatri Hi Robert Nelson, On Thu, 28 Mar 2024 14:12:04 -0500, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Robert, I did a couple of sync as part of rebase - but for the future, please be aware of [2] I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/2] dt-bindings: arm: ti: Add BeagleY-AI commit: d2b3e3b544d7e657406db3bdcdc296f02f4f07c9 [2/2] arm64: dts: ti: Add k3-j722s-beagley-ai commit: f6a61274cc851e1dbae82b5fa2d3e7087dccf85b All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git [2] https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-03-28 19:12 ` Robert Nelson @ 2024-04-22 20:57 ` Andrew Davis -1 siblings, 0 replies; 24+ messages in thread From: Andrew Davis @ 2024-04-22 20:57 UTC (permalink / raw) To: Robert Nelson, linux-arm-kernel, linux-kernel, devicetree Cc: Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On 3/28/24 2:12 PM, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > index 52b51fd7044e..ca23b7e6a35e 100644 > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > @@ -134,6 +134,7 @@ properties: > - description: K3 J722S SoC and Boards > items: > - enum: > + - beagle,j722s-beagley-ai Recommend "beagle,am67-beagley-ai". The "J722s" is the family name, the part used on this board is the AM67. We do the same for the SK boards, for example, the SK-AM69 uses the AM69 part from the J784s4 family, so it is called k3-am69-sk.dts with compatible = "ti,am69-sk", "ti,j784s4"; This would otherwise be the first board with a specific part attached but uses the SoC family name instead of that specific part name in the DT file/name. Only the EVMs should have the family name since we sell versions of those with all the different parts swapped onto it. I don't imagine you will be selling BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your docs and other collateral use "AM67", using the same here would help avoid confusion. Andrew > - ti,j722s-evm > - const: ti,j722s > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-04-22 20:57 ` Andrew Davis 0 siblings, 0 replies; 24+ messages in thread From: Andrew Davis @ 2024-04-22 20:57 UTC (permalink / raw) To: Robert Nelson, linux-arm-kernel, linux-kernel, devicetree Cc: Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On 3/28/24 2:12 PM, Robert Nelson wrote: > This board is based on ti,j722s > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > index 52b51fd7044e..ca23b7e6a35e 100644 > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > @@ -134,6 +134,7 @@ properties: > - description: K3 J722S SoC and Boards > items: > - enum: > + - beagle,j722s-beagley-ai Recommend "beagle,am67-beagley-ai". The "J722s" is the family name, the part used on this board is the AM67. We do the same for the SK boards, for example, the SK-AM69 uses the AM69 part from the J784s4 family, so it is called k3-am69-sk.dts with compatible = "ti,am69-sk", "ti,j784s4"; This would otherwise be the first board with a specific part attached but uses the SoC family name instead of that specific part name in the DT file/name. Only the EVMs should have the family name since we sell versions of those with all the different parts swapped onto it. I don't imagine you will be selling BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your docs and other collateral use "AM67", using the same here would help avoid confusion. Andrew > - ti,j722s-evm > - const: ti,j722s > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-04-22 20:57 ` Andrew Davis @ 2024-04-23 19:48 ` Robert Nelson -1 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-04-23 19:48 UTC (permalink / raw) To: Andrew Davis Cc: linux-arm-kernel, linux-kernel, devicetree, Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On Mon, Apr 22, 2024 at 3:57 PM Andrew Davis <afd@ti.com> wrote: > > On 3/28/24 2:12 PM, Robert Nelson wrote: > > This board is based on ti,j722s > > > > https://beagley-ai.org/ > > https://openbeagle.org/beagley-ai/beagley-ai > > > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > > CC: Rob Herring <robh@kernel.org> > > CC: Nishanth Menon <nm@ti.com> > > CC: Jared McArthur <j-mcarthur@ti.com> > > CC: Jason Kridner <jkridner@beagleboard.org> > > CC: Deepak Khatri <lorforlinux@beagleboard.org> > > --- > > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > index 52b51fd7044e..ca23b7e6a35e 100644 > > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > @@ -134,6 +134,7 @@ properties: > > - description: K3 J722S SoC and Boards > > items: > > - enum: > > + - beagle,j722s-beagley-ai > > Recommend "beagle,am67-beagley-ai". The "J722s" is the family > name, the part used on this board is the AM67. We do the same > for the SK boards, for example, the SK-AM69 uses the AM69 > part from the J784s4 family, so it is called k3-am69-sk.dts > with compatible = "ti,am69-sk", "ti,j784s4"; > > This would otherwise be the first board with a specific part > attached but uses the SoC family name instead of that specific > part name in the DT file/name. Only the EVMs should have the > family name since we sell versions of those with all the different > parts swapped onto it. I don't imagine you will be selling > BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your > docs and other collateral use "AM67", using the same here > would help avoid confusion. > > Andrew Andrew, would you like us to model this just like the AM69-SK? and also rename the device tree? or just the bindings.. k3-j722s-beagley-ai.dtb -> k3-am67-beagley-ai.dtb or even the am67a k3-am67a-beagley-ai.dtb ? Regards, -- Robert Nelson https://rcn-ee.com/ ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-04-23 19:48 ` Robert Nelson 0 siblings, 0 replies; 24+ messages in thread From: Robert Nelson @ 2024-04-23 19:48 UTC (permalink / raw) To: Andrew Davis Cc: linux-arm-kernel, linux-kernel, devicetree, Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On Mon, Apr 22, 2024 at 3:57 PM Andrew Davis <afd@ti.com> wrote: > > On 3/28/24 2:12 PM, Robert Nelson wrote: > > This board is based on ti,j722s > > > > https://beagley-ai.org/ > > https://openbeagle.org/beagley-ai/beagley-ai > > > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > > CC: Rob Herring <robh@kernel.org> > > CC: Nishanth Menon <nm@ti.com> > > CC: Jared McArthur <j-mcarthur@ti.com> > > CC: Jason Kridner <jkridner@beagleboard.org> > > CC: Deepak Khatri <lorforlinux@beagleboard.org> > > --- > > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > index 52b51fd7044e..ca23b7e6a35e 100644 > > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > @@ -134,6 +134,7 @@ properties: > > - description: K3 J722S SoC and Boards > > items: > > - enum: > > + - beagle,j722s-beagley-ai > > Recommend "beagle,am67-beagley-ai". The "J722s" is the family > name, the part used on this board is the AM67. We do the same > for the SK boards, for example, the SK-AM69 uses the AM69 > part from the J784s4 family, so it is called k3-am69-sk.dts > with compatible = "ti,am69-sk", "ti,j784s4"; > > This would otherwise be the first board with a specific part > attached but uses the SoC family name instead of that specific > part name in the DT file/name. Only the EVMs should have the > family name since we sell versions of those with all the different > parts swapped onto it. I don't imagine you will be selling > BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your > docs and other collateral use "AM67", using the same here > would help avoid confusion. > > Andrew Andrew, would you like us to model this just like the AM69-SK? and also rename the device tree? or just the bindings.. k3-j722s-beagley-ai.dtb -> k3-am67-beagley-ai.dtb or even the am67a k3-am67a-beagley-ai.dtb ? Regards, -- Robert Nelson https://rcn-ee.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-04-23 19:48 ` Robert Nelson @ 2024-04-23 20:00 ` Nishanth Menon -1 siblings, 0 replies; 24+ messages in thread From: Nishanth Menon @ 2024-04-23 20:00 UTC (permalink / raw) To: Robert Nelson Cc: Andrew Davis, linux-arm-kernel, linux-kernel, devicetree, Rob Herring, Jared McArthur, Jason Kridner, Deepak Khatri On 14:48-20240423, Robert Nelson wrote: > On Mon, Apr 22, 2024 at 3:57 PM Andrew Davis <afd@ti.com> wrote: > > > > On 3/28/24 2:12 PM, Robert Nelson wrote: > > > This board is based on ti,j722s > > > > > > https://beagley-ai.org/ > > > https://openbeagle.org/beagley-ai/beagley-ai > > > > > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > > > CC: Rob Herring <robh@kernel.org> > > > CC: Nishanth Menon <nm@ti.com> > > > CC: Jared McArthur <j-mcarthur@ti.com> > > > CC: Jason Kridner <jkridner@beagleboard.org> > > > CC: Deepak Khatri <lorforlinux@beagleboard.org> > > > --- > > > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > > index 52b51fd7044e..ca23b7e6a35e 100644 > > > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > > > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > > @@ -134,6 +134,7 @@ properties: > > > - description: K3 J722S SoC and Boards > > > items: > > > - enum: > > > + - beagle,j722s-beagley-ai > > > > Recommend "beagle,am67-beagley-ai". The "J722s" is the family > > name, the part used on this board is the AM67. We do the same > > for the SK boards, for example, the SK-AM69 uses the AM69 > > part from the J784s4 family, so it is called k3-am69-sk.dts > > with compatible = "ti,am69-sk", "ti,j784s4"; > > > > This would otherwise be the first board with a specific part > > attached but uses the SoC family name instead of that specific > > part name in the DT file/name. Only the EVMs should have the > > family name since we sell versions of those with all the different > > parts swapped onto it. I don't imagine you will be selling > > BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your > > docs and other collateral use "AM67", using the same here > > would help avoid confusion. > > > > Andrew > > Andrew, would you like us to model this just like the AM69-SK? and > also rename the device tree? or just the bindings.. > > k3-j722s-beagley-ai.dtb -> k3-am67-beagley-ai.dtb or even the am67a > k3-am67a-beagley-ai.dtb ? > Will drop these patches off the queue for now. please respin as needed. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-04-23 20:00 ` Nishanth Menon 0 siblings, 0 replies; 24+ messages in thread From: Nishanth Menon @ 2024-04-23 20:00 UTC (permalink / raw) To: Robert Nelson Cc: Andrew Davis, linux-arm-kernel, linux-kernel, devicetree, Rob Herring, Jared McArthur, Jason Kridner, Deepak Khatri On 14:48-20240423, Robert Nelson wrote: > On Mon, Apr 22, 2024 at 3:57 PM Andrew Davis <afd@ti.com> wrote: > > > > On 3/28/24 2:12 PM, Robert Nelson wrote: > > > This board is based on ti,j722s > > > > > > https://beagley-ai.org/ > > > https://openbeagle.org/beagley-ai/beagley-ai > > > > > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > > > CC: Rob Herring <robh@kernel.org> > > > CC: Nishanth Menon <nm@ti.com> > > > CC: Jared McArthur <j-mcarthur@ti.com> > > > CC: Jason Kridner <jkridner@beagleboard.org> > > > CC: Deepak Khatri <lorforlinux@beagleboard.org> > > > --- > > > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > > index 52b51fd7044e..ca23b7e6a35e 100644 > > > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > > > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > > > @@ -134,6 +134,7 @@ properties: > > > - description: K3 J722S SoC and Boards > > > items: > > > - enum: > > > + - beagle,j722s-beagley-ai > > > > Recommend "beagle,am67-beagley-ai". The "J722s" is the family > > name, the part used on this board is the AM67. We do the same > > for the SK boards, for example, the SK-AM69 uses the AM69 > > part from the J784s4 family, so it is called k3-am69-sk.dts > > with compatible = "ti,am69-sk", "ti,j784s4"; > > > > This would otherwise be the first board with a specific part > > attached but uses the SoC family name instead of that specific > > part name in the DT file/name. Only the EVMs should have the > > family name since we sell versions of those with all the different > > parts swapped onto it. I don't imagine you will be selling > > BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your > > docs and other collateral use "AM67", using the same here > > would help avoid confusion. > > > > Andrew > > Andrew, would you like us to model this just like the AM69-SK? and > also rename the device tree? or just the bindings.. > > k3-j722s-beagley-ai.dtb -> k3-am67-beagley-ai.dtb or even the am67a > k3-am67a-beagley-ai.dtb ? > Will drop these patches off the queue for now. please respin as needed. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-04-23 19:48 ` Robert Nelson @ 2024-04-23 21:44 ` Andrew Davis -1 siblings, 0 replies; 24+ messages in thread From: Andrew Davis @ 2024-04-23 21:44 UTC (permalink / raw) To: Robert Nelson Cc: linux-arm-kernel, linux-kernel, devicetree, Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On 4/23/24 2:48 PM, Robert Nelson wrote: > On Mon, Apr 22, 2024 at 3:57 PM Andrew Davis <afd@ti.com> wrote: >> >> On 3/28/24 2:12 PM, Robert Nelson wrote: >>> This board is based on ti,j722s >>> >>> https://beagley-ai.org/ >>> https://openbeagle.org/beagley-ai/beagley-ai >>> >>> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >>> CC: Rob Herring <robh@kernel.org> >>> CC: Nishanth Menon <nm@ti.com> >>> CC: Jared McArthur <j-mcarthur@ti.com> >>> CC: Jason Kridner <jkridner@beagleboard.org> >>> CC: Deepak Khatri <lorforlinux@beagleboard.org> >>> --- >>> Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml >>> index 52b51fd7044e..ca23b7e6a35e 100644 >>> --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml >>> +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml >>> @@ -134,6 +134,7 @@ properties: >>> - description: K3 J722S SoC and Boards >>> items: >>> - enum: >>> + - beagle,j722s-beagley-ai >> >> Recommend "beagle,am67-beagley-ai". The "J722s" is the family >> name, the part used on this board is the AM67. We do the same >> for the SK boards, for example, the SK-AM69 uses the AM69 >> part from the J784s4 family, so it is called k3-am69-sk.dts >> with compatible = "ti,am69-sk", "ti,j784s4"; >> >> This would otherwise be the first board with a specific part >> attached but uses the SoC family name instead of that specific >> part name in the DT file/name. Only the EVMs should have the >> family name since we sell versions of those with all the different >> parts swapped onto it. I don't imagine you will be selling >> BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your >> docs and other collateral use "AM67", using the same here >> would help avoid confusion. >> >> Andrew > > Andrew, would you like us to model this just like the AM69-SK? and > also rename the device tree? or just the bindings.. > > k3-j722s-beagley-ai.dtb -> k3-am67-beagley-ai.dtb or even the am67a > k3-am67a-beagley-ai.dtb ? > Yes, rename binding and dtb name would be great. Better now then have the name confuse folks forever. AM67A is more correct than AM67 (which is the spin without AI), given this is an AI focused device I'd imagine you'll be using the "a" version. Andrew > Regards, > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI @ 2024-04-23 21:44 ` Andrew Davis 0 siblings, 0 replies; 24+ messages in thread From: Andrew Davis @ 2024-04-23 21:44 UTC (permalink / raw) To: Robert Nelson Cc: linux-arm-kernel, linux-kernel, devicetree, Rob Herring, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri On 4/23/24 2:48 PM, Robert Nelson wrote: > On Mon, Apr 22, 2024 at 3:57 PM Andrew Davis <afd@ti.com> wrote: >> >> On 3/28/24 2:12 PM, Robert Nelson wrote: >>> This board is based on ti,j722s >>> >>> https://beagley-ai.org/ >>> https://openbeagle.org/beagley-ai/beagley-ai >>> >>> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >>> CC: Rob Herring <robh@kernel.org> >>> CC: Nishanth Menon <nm@ti.com> >>> CC: Jared McArthur <j-mcarthur@ti.com> >>> CC: Jason Kridner <jkridner@beagleboard.org> >>> CC: Deepak Khatri <lorforlinux@beagleboard.org> >>> --- >>> Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml >>> index 52b51fd7044e..ca23b7e6a35e 100644 >>> --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml >>> +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml >>> @@ -134,6 +134,7 @@ properties: >>> - description: K3 J722S SoC and Boards >>> items: >>> - enum: >>> + - beagle,j722s-beagley-ai >> >> Recommend "beagle,am67-beagley-ai". The "J722s" is the family >> name, the part used on this board is the AM67. We do the same >> for the SK boards, for example, the SK-AM69 uses the AM69 >> part from the J784s4 family, so it is called k3-am69-sk.dts >> with compatible = "ti,am69-sk", "ti,j784s4"; >> >> This would otherwise be the first board with a specific part >> attached but uses the SoC family name instead of that specific >> part name in the DT file/name. Only the EVMs should have the >> family name since we sell versions of those with all the different >> parts swapped onto it. I don't imagine you will be selling >> BeagleY's with TDA4VEN, TDA4AEN, DRA82x, etc.. All your >> docs and other collateral use "AM67", using the same here >> would help avoid confusion. >> >> Andrew > > Andrew, would you like us to model this just like the AM69-SK? and > also rename the device tree? or just the bindings.. > > k3-j722s-beagley-ai.dtb -> k3-am67-beagley-ai.dtb or even the am67a > k3-am67a-beagley-ai.dtb ? > Yes, rename binding and dtb name would be great. Better now then have the name confuse folks forever. AM67A is more correct than AM67 (which is the spin without AI), given this is an AI focused device I'd imagine you'll be using the "a" version. Andrew > Regards, > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2024-04-23 21:46 UTC | newest] Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2024-03-28 19:12 [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson 2024-03-28 19:12 ` Robert Nelson 2024-03-28 19:12 ` [PATCH 2/2] arm64: dts: ti: Add k3-j722s-beagley-ai Robert Nelson 2024-03-28 19:12 ` Robert Nelson 2024-03-28 19:15 ` Robert Nelson 2024-03-28 19:15 ` Robert Nelson 2024-03-28 19:26 ` Jason Kridner 2024-03-28 19:26 ` Jason Kridner 2024-03-28 19:37 ` Robert Nelson 2024-03-28 19:37 ` Robert Nelson 2024-03-28 21:01 ` [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI Rob Herring 2024-03-28 21:01 ` Rob Herring 2024-04-02 13:43 ` Rob Herring 2024-04-02 13:43 ` Rob Herring 2024-04-09 19:41 ` Nishanth Menon 2024-04-09 19:41 ` Nishanth Menon 2024-04-22 20:57 ` Andrew Davis 2024-04-22 20:57 ` Andrew Davis 2024-04-23 19:48 ` Robert Nelson 2024-04-23 19:48 ` Robert Nelson 2024-04-23 20:00 ` Nishanth Menon 2024-04-23 20:00 ` Nishanth Menon 2024-04-23 21:44 ` Andrew Davis 2024-04-23 21:44 ` Andrew Davis
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.