[PATCH AUTOSEL 5.4 01/23] Input: synaptics-rmi4 - fail probing if memory allocation for "phys" fails

[PATCH AUTOSEL 5.4 01/23] Input: synaptics-rmi4 - fail probing if memory allocation for "phys" fails

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit bc4996184d56cfaf56d3811ac2680c8a0e2af56e ]

While input core can work with input->phys set to NULL userspace might
depend on it, so better fail probing if allocation fails. The system must
be in a pretty bad shape for it to happen anyway.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240117073124.143636-1-chentao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/rmi4/rmi_driver.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 258d5fe3d395c..aa32371f04af6 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -1196,7 +1196,11 @@ static int rmi_driver_probe(struct device *dev)
 		}
 		rmi_driver_set_input_params(rmi_dev, data->input);
 		data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
-						"%s/input0", dev_name(dev));
+						   "%s/input0", dev_name(dev));
+		if (!data->input->phys) {
+			retval = -ENOMEM;
+			goto err;
+		}
 	}
 
 	retval = rmi_init_functions(data);
-- 
2.43.0

[PATCH AUTOSEL 5.4 02/23] VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()

[Sasha Levin]

From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

[ Upstream commit 19b070fefd0d024af3daa7329cbc0d00de5302ec ]

Syzkaller hit 'WARNING in dg_dispatch_as_host' bug.

memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg"
at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24)

WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237
dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237

Some code commentry, based on my understanding:

544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size)
/// This is 24 + payload_size

memcpy(&dg_info->msg, dg, dg_size);
	Destination = dg_info->msg ---> this is a 24 byte
					structure(struct vmci_datagram)
	Source = dg --> this is a 24 byte structure (struct vmci_datagram)
	Size = dg_size = 24 + payload_size

{payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32.

 35 struct delayed_datagram_info {
 36         struct datagram_entry *entry;
 37         struct work_struct work;
 38         bool in_dg_host_queue;
 39         /* msg and msg_payload must be together. */
 40         struct vmci_datagram msg;
 41         u8 msg_payload[];
 42 };

So those extra bytes of payload are copied into msg_payload[], a run time
warning is seen while fuzzing with Syzkaller.

One possible way to fix the warning is to split the memcpy() into
two parts -- one -- direct assignment of msg and second taking care of payload.

Gustavo quoted:
"Under FORTIFY_SOURCE we should not copy data across multiple members
in a structure."

Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240105164001.2129796-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/vmw_vmci/vmci_datagram.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/vmw_vmci/vmci_datagram.c b/drivers/misc/vmw_vmci/vmci_datagram.c
index f50d22882476f..d1d8224c8800c 100644
--- a/drivers/misc/vmw_vmci/vmci_datagram.c
+++ b/drivers/misc/vmw_vmci/vmci_datagram.c
@@ -234,7 +234,8 @@ static int dg_dispatch_as_host(u32 context_id, struct vmci_datagram *dg)
 
 			dg_info->in_dg_host_queue = true;
 			dg_info->entry = dst_entry;
-			memcpy(&dg_info->msg, dg, dg_size);
+			dg_info->msg = *dg;
+			memcpy(&dg_info->msg_payload, dg + 1, dg->payload_size);
 
 			INIT_WORK(&dg_info->work, dg_delayed_dispatch);
 			schedule_work(&dg_info->work);
-- 
2.43.0

[PATCH AUTOSEL 5.4 03/23] sysv: don't call sb_bread() with pointers_lock held

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit f123dc86388cb669c3d6322702dc441abc35c31e ]

syzbot is reporting sleep in atomic context in SysV filesystem [1], for
sb_bread() is called with rw_spinlock held.

A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug
and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by
"Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12.

Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the
former bug by moving pointers_lock lock to the callers, but instead
introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made
this problem easier to hit).

Al Viro suggested that why not to do like get_branch()/get_block()/
find_shared() in Minix filesystem does. And doing like that is almost a
revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch()
 from with find_shared() is called without write_lock(&pointers_lock).

Reported-by: syzbot <syzbot+69b40dc5fd40f32c199f@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=69b40dc5fd40f32c199f
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/0d195f93-a22a-49a2-0020-103534d6f7f6@I-love.SAKURA.ne.jp
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/sysv/itree.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/sysv/itree.c b/fs/sysv/itree.c
index e3d1673b8ec97..ef9bcfeec21ad 100644
--- a/fs/sysv/itree.c
+++ b/fs/sysv/itree.c
@@ -82,9 +82,6 @@ static inline sysv_zone_t *block_end(struct buffer_head *bh)
 	return (sysv_zone_t*)((char*)bh->b_data + bh->b_size);
 }
 
-/*
- * Requires read_lock(&pointers_lock) or write_lock(&pointers_lock)
- */
 static Indirect *get_branch(struct inode *inode,
 			    int depth,
 			    int offsets[],
@@ -104,15 +101,18 @@ static Indirect *get_branch(struct inode *inode,
 		bh = sb_bread(sb, block);
 		if (!bh)
 			goto failure;
+		read_lock(&pointers_lock);
 		if (!verify_chain(chain, p))
 			goto changed;
 		add_chain(++p, bh, (sysv_zone_t*)bh->b_data + *++offsets);
+		read_unlock(&pointers_lock);
 		if (!p->key)
 			goto no_block;
 	}
 	return NULL;
 
 changed:
+	read_unlock(&pointers_lock);
 	brelse(bh);
 	*err = -EAGAIN;
 	goto no_block;
@@ -218,9 +218,7 @@ static int get_block(struct inode *inode, sector_t iblock, struct buffer_head *b
 		goto out;
 
 reread:
-	read_lock(&pointers_lock);
 	partial = get_branch(inode, depth, offsets, chain, &err);
-	read_unlock(&pointers_lock);
 
 	/* Simplest case - block found, no allocation needed */
 	if (!partial) {
@@ -290,9 +288,9 @@ static Indirect *find_shared(struct inode *inode,
 	*top = 0;
 	for (k = depth; k > 1 && !offsets[k-1]; k--)
 		;
+	partial = get_branch(inode, k, offsets, chain, &err);
 
 	write_lock(&pointers_lock);
-	partial = get_branch(inode, k, offsets, chain, &err);
 	if (!partial)
 		partial = chain + k-1;
 	/*
-- 
2.43.0

[PATCH AUTOSEL 5.4 04/23] quota: Fix potential NULL pointer dereference

[Sasha Levin]

From: Wang Jianjian <wangjianjian3@huawei.com>

[ Upstream commit d0aa72604fbd80c8aabb46eda00535ed35570f1f ]

Below race may cause NULL pointer dereference

P1					P2
dquot_free_inode			quota_off
					  drop_dquot_ref
					   remove_dquot_ref
					   dquots = i_dquot(inode)
  dquots = i_dquot(inode)
  srcu_read_lock
  dquots[cnt]) != NULL (1)
					     dquots[type] = NULL (2)
  spin_lock(&dquots[cnt]->dq_dqb_lock) (3)
   ....

If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.

So let's fix it by using a temporary pointer to avoid this issue.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240202081852.2514092-1-wangjianjian3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 98 ++++++++++++++++++++++++++++--------------------
 1 file changed, 57 insertions(+), 41 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index d9da4a8c4317c..6fe2d6ea93918 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -399,15 +399,17 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquot)
+static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
 {
 	int ret, err, cnt;
+	struct dquot *dquot;
 
 	ret = err = 0;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquot[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot)
 			/* Even in case of error we have to continue */
-			ret = mark_dquot_dirty(dquot[cnt]);
+			ret = mark_dquot_dirty(dquot);
 		if (!err)
 			err = ret;
 	}
@@ -1727,6 +1729,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
 	struct dquot **dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
 		if (reserve) {
@@ -1746,27 +1749,26 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
 		if (reserve) {
-			ret = dquot_add_space(dquots[cnt], 0, number, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, 0, number, flags, &warn[cnt]);
 		} else {
-			ret = dquot_add_space(dquots[cnt], number, 0, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, number, 0, flags, &warn[cnt]);
 		}
 		if (ret) {
 			/* Back out changes we already did */
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
 				if (reserve)
-					dquot_free_reserved_space(dquots[cnt],
-								  number);
+					dquot_free_reserved_space(dquot, number);
 				else
-					dquot_decr_space(dquots[cnt], number);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+					dquot_decr_space(dquot, number);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			spin_unlock(&inode->i_lock);
 			goto out_flush_warn;
@@ -1797,6 +1799,7 @@ int dquot_alloc_inode(struct inode *inode)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
 		return 0;
@@ -1807,17 +1810,19 @@ int dquot_alloc_inode(struct inode *inode)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		ret = dquot_add_inodes(dquots[cnt], 1, &warn[cnt]);
+		ret = dquot_add_inodes(dquot, 1, &warn[cnt]);
 		if (ret) {
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
 				/* Back out changes we already did */
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquot_decr_inodes(dquots[cnt], 1);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot_decr_inodes(dquot, 1);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			goto warn_put_all;
 		}
@@ -1839,6 +1844,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1854,9 +1860,8 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_rsvspace < number))
 				number = dquot->dq_dqb.dqb_rsvspace;
@@ -1881,6 +1886,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1896,9 +1902,8 @@ void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_curspace < number))
 				number = dquot->dq_dqb.dqb_curspace;
@@ -1925,6 +1930,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1945,17 +1951,18 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 		int wtype;
 
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_bdq_free(dquots[cnt], number);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_bdq_free(dquot, number);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
+			prepare_warning(&warn[cnt], dquot, wtype);
 		if (reserve)
-			dquot_free_reserved_space(dquots[cnt], number);
+			dquot_free_reserved_space(dquot, number);
 		else
-			dquot_decr_space(dquots[cnt], number);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			dquot_decr_space(dquot, number);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	if (reserve)
 		*inode_reserved_space(inode) -= number;
@@ -1980,6 +1987,7 @@ void dquot_free_inode(struct inode *inode)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 	int index;
 
 	if (!inode_quota_active(inode))
@@ -1990,16 +1998,16 @@ void dquot_free_inode(struct inode *inode)
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		int wtype;
-
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_idq_free(dquots[cnt], 1);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_idq_free(dquot, 1);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
-		dquot_decr_inodes(dquots[cnt], 1);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			prepare_warning(&warn[cnt], dquot, wtype);
+		dquot_decr_inodes(dquot, 1);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	spin_unlock(&inode->i_lock);
 	mark_all_dquot_dirty(dquots);
@@ -2026,7 +2034,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
-	int cnt, ret = 0;
+	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
 	struct dquot_warn warn_to[MAXQUOTAS];
 	struct dquot_warn warn_from_inodes[MAXQUOTAS];
@@ -2115,8 +2123,16 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
 
+	/*
+	 * These arrays are local and we hold dquot references so we don't need
+	 * the srcu protection but still take dquot_srcu to avoid warning in
+	 * mark_all_dquot_dirty().
+	 */
+	index = srcu_read_lock(&dquot_srcu);
 	mark_all_dquot_dirty(transfer_from);
 	mark_all_dquot_dirty(transfer_to);
+	srcu_read_unlock(&dquot_srcu, index);
+
 	flush_warnings(warn_to);
 	flush_warnings(warn_from_inodes);
 	flush_warnings(warn_from_space);
-- 
2.43.0

[PATCH AUTOSEL 5.4 05/23] scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc()

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 2ae917d4bcab80ab304b774d492e2fcd6c52c06b ]

The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an
unsuccessful status.  In such cases, the elsiocb is not issued, the
completion is not called, and thus the elsiocb resource is leaked.

Check return value after calling lpfc_sli4_resume_rpi() and conditionally
release the elsiocb resource.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index e6a94f550a572..1ca3179444d23 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -781,8 +781,10 @@ lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 				/* Save the ELS cmd */
 				elsiocb->drvrTimeout = cmd;
 
-				lpfc_sli4_resume_rpi(ndlp,
-					lpfc_mbx_cmpl_resume_rpi, elsiocb);
+				if (lpfc_sli4_resume_rpi(ndlp,
+						lpfc_mbx_cmpl_resume_rpi,
+						elsiocb))
+					kfree(elsiocb);
 				goto out;
 			}
 		}
-- 
2.43.0

[PATCH AUTOSEL 5.4 06/23] panic: Flush kernel log buffer at the end

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit d988d9a9b9d180bfd5c1d353b3b176cb90d6861b ]

If the kernel crashes in a context where printk() calls always
defer printing (such as in NMI or inside a printk_safe section)
then the final panic messages will be deferred to irq_work. But
if irq_work is not available, the messages will not get printed
unless explicitly flushed. The result is that the final
"end Kernel panic" banner does not get printed.

Add one final flush after the last printk() call to make sure
the final panic messages make it out as well.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-14-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/panic.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/panic.c b/kernel/panic.c
index cef79466f9417..5559a6e4c4579 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -404,6 +404,14 @@ void panic(const char *fmt, ...)
 
 	/* Do not scroll important messages printed above */
 	suppress_printk = 1;
+
+	/*
+	 * The final messages may not have been printed if in a context that
+	 * defers printing (such as NMI) and irq_work is not available.
+	 * Explicitly flush the kernel log buffer one last time.
+	 */
+	console_flush_on_panic(CONSOLE_FLUSH_PENDING);
+
 	local_irq_enable();
 	for (i = 0; ; i += PANIC_TIMER_STEP) {
 		touch_softlockup_watchdog();
-- 
2.43.0

[PATCH AUTOSEL 5.4 07/23] isofs: handle CDs with bad root inode but good Joliet root directory

[Sasha Levin]

From: Alex Henrie <alexhenrie24@gmail.com>

[ Upstream commit 4243bf80c79211a8ca2795401add9c4a3b1d37ca ]

I have a CD copy of the original Tom Clancy's Ghost Recon game from
2001. The disc mounts without error on Windows, but on Linux mounting
fails with the message "isofs_fill_super: get root inode failed". The
error originates in isofs_read_inode, which returns -EIO because de_len
is 0. The superblock on this disc appears to be intentionally corrupt as
a form of copy protection.

When the root inode is unusable, instead of giving up immediately, try
to continue with the Joliet file table. This fixes the Ghost Recon CD
and probably other copy-protected CDs too.

Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240208022134.451490-1-alexhenrie24@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/isofs/inode.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 74e487d63c62c..95c08f3c4b35e 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -912,8 +912,22 @@ static int isofs_fill_super(struct super_block *s, void *data, int silent)
 	 * we then decide whether to use the Joliet descriptor.
 	 */
 	inode = isofs_iget(s, sbi->s_firstdatazone, 0);
-	if (IS_ERR(inode))
-		goto out_no_root;
+
+	/*
+	 * Fix for broken CDs with a corrupt root inode but a correct Joliet
+	 * root directory.
+	 */
+	if (IS_ERR(inode)) {
+		if (joliet_level && sbi->s_firstdatazone != first_data_zone) {
+			printk(KERN_NOTICE
+			       "ISOFS: root inode is unusable. "
+			       "Disabling Rock Ridge and switching to Joliet.");
+			sbi->s_rock = 0;
+			inode = NULL;
+		} else {
+			goto out_no_root;
+		}
+	}
 
 	/*
 	 * Fix for broken CDs with Rock Ridge and empty ISO root directory but
-- 
2.43.0

[PATCH AUTOSEL 5.4 08/23] arm64: dts: rockchip: fix rk3328 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]

Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 6ddb6b8c1fad5..ef45d5607ea1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -684,11 +684,20 @@ hdmi: hdmi@ff3c0000 {
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 08/23] arm64: dts: rockchip: fix rk3328 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]

Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 6ddb6b8c1fad5..ef45d5607ea1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -684,11 +684,20 @@ hdmi: hdmi@ff3c0000 {
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 08/23] arm64: dts: rockchip: fix rk3328 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]

Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 6ddb6b8c1fad5..ef45d5607ea1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -684,11 +684,20 @@ hdmi: hdmi@ff3c0000 {
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.4 09/23] arm64: dts: rockchip: fix rk3399 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]

Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4496f7e1c68f8..e5a25bc7d7997 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1743,6 +1743,7 @@ simple-audio-card,codec {
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1751,13 +1752,16 @@ hdmi: hdmi@ff940000 {
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1770,6 +1774,10 @@ hdmi_in_vopl: endpoint@1 {
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 09/23] arm64: dts: rockchip: fix rk3399 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]

Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4496f7e1c68f8..e5a25bc7d7997 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1743,6 +1743,7 @@ simple-audio-card,codec {
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1751,13 +1752,16 @@ hdmi: hdmi@ff940000 {
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1770,6 +1774,10 @@ hdmi_in_vopl: endpoint@1 {
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 09/23] arm64: dts: rockchip: fix rk3399 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]

Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4496f7e1c68f8..e5a25bc7d7997 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1743,6 +1743,7 @@ simple-audio-card,codec {
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1751,13 +1752,16 @@ hdmi: hdmi@ff940000 {
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1770,6 +1774,10 @@ hdmi_in_vopl: endpoint@1 {
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.4 10/23] media: sta2x11: fix irq handler cast

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 3de49ae81c3a0f83a554ecbce4c08e019f30168e ]

clang-16 warns about casting incompatible function pointers:

drivers/media/pci/sta2x11/sta2x11_vip.c:1057:6: error: cast from 'irqreturn_t (*)(int, struct sta2x11_vip *)' (aka 'enum irqreturn (*)(int, struct sta2x11_vip *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Change the prototype of the irq handler to the regular version with a
local variable to adjust the argument type.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: update argument documentation]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/sta2x11/sta2x11_vip.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c
index fd3de3bb0c89b..80b7862a8e02f 100644
--- a/drivers/media/pci/sta2x11/sta2x11_vip.c
+++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
@@ -760,7 +760,7 @@ static const struct video_device video_dev_template = {
 /**
  * vip_irq - interrupt routine
  * @irq: Number of interrupt ( not used, correct number is assumed )
- * @vip: local data structure containing all information
+ * @data: local data structure containing all information
  *
  * check for both frame interrupts set ( top and bottom ).
  * check FIFO overflow, but limit number of log messages after open.
@@ -770,8 +770,9 @@ static const struct video_device video_dev_template = {
  *
  * IRQ_HANDLED, interrupt done.
  */
-static irqreturn_t vip_irq(int irq, struct sta2x11_vip *vip)
+static irqreturn_t vip_irq(int irq, void *data)
 {
+	struct sta2x11_vip *vip = data;
 	unsigned int status;
 
 	status = reg_read(vip, DVP_ITS);
@@ -1053,9 +1054,7 @@ static int sta2x11_vip_init_one(struct pci_dev *pdev,
 
 	spin_lock_init(&vip->slock);
 
-	ret = request_irq(pdev->irq,
-			  (irq_handler_t) vip_irq,
-			  IRQF_SHARED, KBUILD_MODNAME, vip);
+	ret = request_irq(pdev->irq, vip_irq, IRQF_SHARED, KBUILD_MODNAME, vip);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
 		ret = -ENODEV;
-- 
2.43.0

[PATCH AUTOSEL 5.4 11/23] drm/amd/display: Fix nanosec stat overflow

[Sasha Levin]

From: Aric Cyr <aric.cyr@amd.com>

[ Upstream commit 14d68acfd04b39f34eea7bea65dda652e6db5bf6 ]

[Why]
Nanosec stats can overflow on long running systems potentially causing
statistic logging issues.

[How]
Use 64bit types for nanosec stats to ensure no overflow.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/inc/mod_stats.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/inc/mod_stats.h b/drivers/gpu/drm/amd/display/modules/inc/mod_stats.h
index 3812094b52e8f..88b312c3eb43a 100644
--- a/drivers/gpu/drm/amd/display/modules/inc/mod_stats.h
+++ b/drivers/gpu/drm/amd/display/modules/inc/mod_stats.h
@@ -51,10 +51,10 @@ void mod_stats_update_event(struct mod_stats *mod_stats,
 		unsigned int length);
 
 void mod_stats_update_flip(struct mod_stats *mod_stats,
-		unsigned long timestamp_in_ns);
+		unsigned long long timestamp_in_ns);
 
 void mod_stats_update_vupdate(struct mod_stats *mod_stats,
-		unsigned long timestamp_in_ns);
+		unsigned long long timestamp_in_ns);
 
 void mod_stats_update_freesync(struct mod_stats *mod_stats,
 		unsigned int v_total_min,
-- 
2.43.0

[PATCH AUTOSEL 5.4 12/23] tools/power x86_energy_perf_policy: Fix file leak in get_pkg_num()

[Sasha Levin]

From: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>

[ Upstream commit f85450f134f0b4ca7e042dc3dc89155656a2299d ]

In function get_pkg_num() if fopen_or_die() succeeds it returns a file
pointer to be used. But fclose() is never called before returning from
the function.

Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
index 3fe1eed900d41..165eb4da8a644 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -1111,6 +1111,7 @@ unsigned int get_pkg_num(int cpu)
 	retval = fscanf(fp, "%d\n", &pkg);
 	if (retval != 1)
 		errx(1, "%s: failed to parse", pathname);
+	fclose(fp);
 	return pkg;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 13/23] SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned int

[Sasha Levin]

From: Dai Ngo <dai.ngo@oracle.com>

[ Upstream commit 2c35f43b5a4b9cdfaa6fdd946f5a212615dac8eb ]

When the NFS client is under extreme load the rpc_wait_queue.qlen counter
can be overflowed. Here is an instant of the backlog queue overflow in a
real world environment shown by drgn helper:

rpc_task_stats(rpc_clnt):
-------------------------
rpc_clnt: 0xffff92b65d2bae00
rpc_xprt: 0xffff9275db64f000
  Queue:  sending[64887] pending[524] backlog[30441] binding[0]
XMIT task: 0xffff925c6b1d8e98
     WRITE: 750654
        __dta_call_status_580: 65463
        __dta_call_transmit_status_579: 1
        call_reserveresult: 685189
        nfs_client_init_is_complete: 1
    COMMIT: 584
        call_reserveresult: 573
        __dta_call_status_580: 11
    ACCESS: 1
        __dta_call_status_580: 1
   GETATTR: 10
        __dta_call_status_580: 4
        call_reserveresult: 6
751249 tasks for server 111.222.333.444
Total tasks: 751249

count_rpc_wait_queues(xprt):
----------------------------
**** rpc_xprt: 0xffff9275db64f000 num_reqs: 65511
wait_queue: xprt_binding[0] cnt: 0
wait_queue: xprt_binding[1] cnt: 0
wait_queue: xprt_binding[2] cnt: 0
wait_queue: xprt_binding[3] cnt: 0
rpc_wait_queue[xprt_binding].qlen: 0 maxpriority: 0
wait_queue: xprt_sending[0] cnt: 0
wait_queue: xprt_sending[1] cnt: 64887
wait_queue: xprt_sending[2] cnt: 0
wait_queue: xprt_sending[3] cnt: 0
rpc_wait_queue[xprt_sending].qlen: 64887 maxpriority: 3
wait_queue: xprt_pending[0] cnt: 524
wait_queue: xprt_pending[1] cnt: 0
wait_queue: xprt_pending[2] cnt: 0
wait_queue: xprt_pending[3] cnt: 0
rpc_wait_queue[xprt_pending].qlen: 524 maxpriority: 0
wait_queue: xprt_backlog[0] cnt: 0
wait_queue: xprt_backlog[1] cnt: 685801
wait_queue: xprt_backlog[2] cnt: 0
wait_queue: xprt_backlog[3] cnt: 0
rpc_wait_queue[xprt_backlog].qlen: 30441 maxpriority: 3 [task cnt mismatch]

There is no effect on operations when this overflow occurs. However
it causes confusion when trying to diagnose the performance problem.

Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/sched.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 5c37fabdec103..61de83be9cc27 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -196,7 +196,7 @@ struct rpc_wait_queue {
 	unsigned char		maxpriority;		/* maximum priority (0 if queue is not a priority queue) */
 	unsigned char		priority;		/* current priority */
 	unsigned char		nr;			/* # tasks remaining for cookie */
-	unsigned short		qlen;			/* total # tasks waiting in queue */
+	unsigned int		qlen;			/* total # tasks waiting in queue */
 	struct rpc_timer	timer_list;
 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG) || IS_ENABLED(CONFIG_TRACEPOINTS)
 	const char *		name;
-- 
2.43.0

[PATCH AUTOSEL 5.4 14/23] Revert "ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default"

[Sasha Levin]

From: Daniel Drake <drake@endlessos.org>

[ Upstream commit cb98555fcd8eee98c30165537c7e394f3a66e809 ]

This reverts commit d52848620de00cde4a3a5df908e231b8c8868250, which was
originally put in place to work around a s2idle failure on this platform
where the NVMe device was inaccessible upon resume.

After extended testing, we found that the firmware's implementation of S3
is buggy and intermittently fails to wake up the system. We need to revert
to s2idle mode.

The NVMe issue has now been solved more precisely in the commit titled
"PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge"

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Link: https://lore.kernel.org/r/20240228075316.7404-2-drake@endlessos.org
Signed-off-by: Daniel Drake <drake@endlessos.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/sleep.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index b9d203569ac1d..5996293f422e3 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -382,18 +382,6 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"),
 		},
 	},
-	/*
-	 * ASUS B1400CEAE hangs on resume from suspend (see
-	 * https://bugzilla.kernel.org/show_bug.cgi?id=215742).
-	 */
-	{
-	.callback = init_default_s3,
-	.ident = "ASUS B1400CEAE",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-		DMI_MATCH(DMI_PRODUCT_NAME, "ASUS EXPERTBOOK B1400CEAE"),
-		},
-	},
 	{},
 };
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 15/23] sparc: vdso: Disable UBSAN instrumentation

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit d4be85d068b4418c341f79b654399f7f0891069a ]

The UBSAN instrumentation cannot work in the vDSO since it is executing
in userspace, so disable it in the Makefile. Fixes the build failures
such as:

arch/sparc/vdso/vclock_gettime.c:217: undefined reference to `__ubsan_handle_shift_out_of_bounds'

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/all/20240224073617.GA2959352@ravnborg.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/vdso/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile
index 997ffe46e953a..5b869c2c84363 100644
--- a/arch/sparc/vdso/Makefile
+++ b/arch/sparc/vdso/Makefile
@@ -2,6 +2,7 @@
 #
 # Building vDSO images for sparc.
 #
+UBSAN_SANITIZE := n
 
 KBUILD_CFLAGS += $(DISABLE_LTO)
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 16/23] PCI: Mark LSI FW643 to avoid bus reset

[Sasha Levin]

From: Edmund Raile <edmund.raile@proton.me>

[ Upstream commit 29a43dc130ce65d365a8ea9e1cc4bc51005a353e ]

Apparently the LSI / Agere FW643 can't recover after a Secondary Bus Reset
and requires a power-off or suspend/resume and rescan.

VFIO resets a device before assigning it to a VM, and the FW643 doesn't
support any other reset methods, so this problem prevented assignment of
FW643 to VMs.

Prevent use of Secondary Bus Reset for this device.

With this change, the FW643 can be assigned to VMs with VFIO.  Note that it
will not be reset, resulting in leaking state between VMs and host.

Link: https://lore.kernel.org/r/20240227131401.17913-1-edmund.raile@proton.me
Signed-off-by: Edmund Raile <edmund.raile@proton.me>
[bhelgaas: commit log, comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 821e71a45849c..91aeef1be7e70 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3598,6 +3598,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset);
  */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
 
+/*
+ * Apparently the LSI / Agere FW643 can't recover after a Secondary Bus
+ * Reset and requires a power-off or suspend/resume and rescan.  Prevent
+ * use of that reset.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATT, 0x5900, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATT, 0x5901, quirk_no_bus_reset);
+
 /*
  * Some TI KeyStone C667X devices do not support bus/hot reset.  The PCIESS
  * automatically disables LTSSM when Secondary Bus Reset is received and
-- 
2.43.0

[PATCH AUTOSEL 5.4 17/23] sh: Fix build with CONFIG_UBSAN=y

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit e36b70fb8c707a0688960184380bc151390d671b ]

The early boot stub for sh had UBSan instrumentation present where it is
not supported. Disable it for this part of the build.

  sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
  misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401310416.s8HLiLnC-lkp@intel.com/
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <n.schier@avm.de>
Cc:  <linux-sh@vger.kernel.org>
Link: https://lore.kernel.org/r/20240130232717.work.088-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/boot/compressed/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index f5e1bd7797892..362f2c9f9f7fc 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -13,6 +13,7 @@ targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
 
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 #
 # IMAGE_OFFSET is the load offset of the compression loader
-- 
2.43.0

[PATCH AUTOSEL 5.4 18/23] btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks()

[Sasha Levin]

From: David Sterba <dsterba@suse.com>

[ Upstream commit 7411055db5ce64f836aaffd422396af0075fdc99 ]

The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption,
as it could be caused only by two impossible conditions:

- at first the search key is set up to look for a chunk tree item, with
  offset -1, this is an inexact search and the key->offset will contain
  the correct offset upon a successful search, a valid chunk tree item
  cannot have an offset -1

- after first successful search, the found_key corresponds to a chunk
  item, the offset is decremented by 1 before the next loop, it's
  impossible to find a chunk item there due to alignment and size
  constraints

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/volumes.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index e11c8da9a5605..b5873df0aa93a 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -3268,7 +3268,17 @@ static int btrfs_relocate_sys_chunks(struct btrfs_fs_info *fs_info)
 			mutex_unlock(&fs_info->delete_unused_bgs_mutex);
 			goto error;
 		}
-		BUG_ON(ret == 0); /* Corruption */
+		if (ret == 0) {
+			/*
+			 * On the first search we would find chunk tree with
+			 * offset -1, which is not possible. On subsequent
+			 * loops this would find an existing item on an invalid
+			 * offset (one less than the previous one, wrong
+			 * alignment and size).
+			 */
+			ret = -EUCLEAN;
+			goto error;
+		}
 
 		ret = btrfs_previous_item(chunk_root, path, key.objectid,
 					  key.type);
-- 
2.43.0

[PATCH AUTOSEL 5.4 19/23] btrfs: export: handle invalid inode or root reference in btrfs_get_parent()

[Sasha Levin]

From: David Sterba <dsterba@suse.com>

[ Upstream commit 26b66d1d366a375745755ca7365f67110bbf6bd5 ]

The get_parent handler looks up a parent of a given dentry, this can be
either a subvolume or a directory. The search is set up with offset -1
but it's never expected to find such item, as it would break allowed
range of inode number or a root id. This means it's a corruption (ext4
also returns this error code).

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/export.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index 6e4727304b7b4..08d1d456e2f0f 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -182,8 +182,15 @@ struct dentry *btrfs_get_parent(struct dentry *child)
 	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
 	if (ret < 0)
 		goto fail;
+	if (ret == 0) {
+		/*
+		 * Key with offset of -1 found, there would have to exist an
+		 * inode with such number or a root with such id.
+		 */
+		ret = -EUCLEAN;
+		goto fail;
+	}
 
-	BUG_ON(ret == 0); /* Key with offset of -1 found */
 	if (path->slots[0] == 0) {
 		ret = -ENOENT;
 		goto fail;
-- 
2.43.0

[PATCH AUTOSEL 5.4 20/23] btrfs: send: handle path ref underflow in header iterate_inode_ref()

[Sasha Levin]

From: David Sterba <dsterba@suse.com>

[ Upstream commit 3c6ee34c6f9cd12802326da26631232a61743501 ]

Change BUG_ON to proper error handling if building the path buffer
fails. The pointers are not printed so we don't accidentally leak kernel
addresses.

Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/send.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 0dfa88ac01393..576c027909f8a 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -973,7 +973,15 @@ static int iterate_inode_ref(struct btrfs_root *root, struct btrfs_path *path,
 					ret = PTR_ERR(start);
 					goto out;
 				}
-				BUG_ON(start < p->buf);
+				if (unlikely(start < p->buf)) {
+					btrfs_err(root->fs_info,
+			"send: path ref buffer underflow for key (%llu %u %llu)",
+						  found_key->objectid,
+						  found_key->type,
+						  found_key->offset);
+					ret = -EINVAL;
+					goto out;
+				}
 			}
 			p->start = start;
 		} else {
-- 
2.43.0

[PATCH AUTOSEL 5.4 21/23] block: prevent division by zero in blk_rq_stat_sum()

[Sasha Levin]

From: Roman Smirnov <r.smirnov@omp.ru>

[ Upstream commit 93f52fbeaf4b676b21acfe42a5152620e6770d02 ]

The expression dst->nr_samples + src->nr_samples may
have zero value on overflow. It is necessary to add
a check to avoid division by zero.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240305134509.23108-1-r.smirnov@omp.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-stat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-stat.c b/block/blk-stat.c
index 940f15d600f8a..af482d8f9f7a4 100644
--- a/block/blk-stat.c
+++ b/block/blk-stat.c
@@ -28,7 +28,7 @@ void blk_rq_stat_init(struct blk_rq_stat *stat)
 /* src is a per-cpu stat, mean isn't initialized */
 void blk_rq_stat_sum(struct blk_rq_stat *dst, struct blk_rq_stat *src)
 {
-	if (!src->nr_samples)
+	if (dst->nr_samples + src->nr_samples <= dst->nr_samples)
 		return;
 
 	dst->min = min(dst->min, src->min);
-- 
2.43.0

[PATCH AUTOSEL 5.4 22/23] Input: allocate keycode for Display refresh rate toggle

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit cfeb98b95fff25c442f78a6f616c627bc48a26b7 ]

Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.

Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/15a5d08c84cf4d7b820de34ebbcf8ae2502fb3ca.1710065750.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/input-event-codes.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 7f0ae1f411e3a..bf6c2f0b26fdc 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -598,6 +598,7 @@
 
 #define KEY_ALS_TOGGLE		0x230	/* Ambient light sensor */
 #define KEY_ROTATE_LOCK_TOGGLE	0x231	/* Display rotation lock */
+#define KEY_REFRESH_RATE_TOGGLE	0x232	/* Display refresh rate toggle */
 
 #define KEY_BUTTONCONFIG		0x240	/* AL Button Configuration */
 #define KEY_TASKMANAGER		0x241	/* AL Task/Project Manager */
-- 
2.43.0

[PATCH AUTOSEL 5.4 23/23] ktest: force $buildonly = 1 for 'make_warnings_file' test type

[Sasha Levin]

From: "Ricardo B. Marliere" <ricardo@marliere.net>

[ Upstream commit 07283c1873a4d0eaa0e822536881bfdaea853910 ]

The test type "make_warnings_file" should have no mandatory configuration
parameters other than the ones required by the "build" test type, because
its purpose is to create a file with build warnings that may or may not be
used by other subsequent tests. Currently, the only way to use it as a
stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER,
BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU.

Link: https://lkml.kernel.org/r/20240315-ktest-v2-1-c5c20a75f6a3@marliere.net

Cc: John Hawley <warthog9@eaglescrag.net>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/ktest/ktest.pl | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 698b99e25f980..d36612c620981 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -768,6 +768,7 @@ sub set_value {
     if ($lvalue =~ /^(TEST|BISECT|CONFIG_BISECT)_TYPE(\[.*\])?$/ &&
 	$prvalue !~ /^(config_|)bisect$/ &&
 	$prvalue !~ /^build$/ &&
+	$prvalue !~ /^make_warnings_file$/ &&
 	$buildonly) {
 
 	# Note if a test is something other than build, then we
-- 
2.43.0