[PATCH net-next v3 0/5] net: stmmac: Add support for RZN1 GMAC devices

[PATCH net-next v3 0/5] net: stmmac: Add support for RZN1 GMAC devices

[Romain Gantois]

Hello everyone,

This is version three of my series that adds support for a Gigabit Ethernet
controller featured in the Renesas r9a06g032 SoC, of the RZ/N1 family. This
GMAC device is based on a Synopsys IP and is compatible with the stmmac driver.

My former colleague Clément Léger originally sent a series for this driver,
but an issue in bringing up the PCS clock had blocked the upstreaming
process. This issue has since been resolved by the following series:

https://lore.kernel.org/all/20240326-rxc_bugfix-v6-0-24a74e5c761f@bootlin.com/

This series consists of a devicetree binding describing the RZN1 GMAC
controller IP, a node for the GMAC1 device in the r9a06g032 SoC device
tree, and the GMAC driver itself which is a glue layer in stmmac.

There are also two patches by Russell that improve pcs initialization handling
in stmmac.

Best Regards,

Romain Gantois

---
Changes in v3:
- Fixed a typo in the socfpga patch
- Link to v2: https://lore.kernel.org/r/20240409-rzn1-gmac1-v2-0-79ca45f2fc79@bootlin.com

Changes in v2:
- Add pcs_init/exit callbacks in stmmac to solve race condition
- Use pcs_init/exit callbacks in dwmac_socfpga glue layer
- Miscellaneous device tree binding corrections
- Link to v1: https://lore.kernel.org/r/20240402-rzn1-gmac1-v1-0-5be2b2894d8c@bootlin.com

---
Clément Léger (3):
      dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
      net: stmmac: add support for RZ/N1 GMAC
      ARM: dts: r9a06g032: describe GMAC1

Russell King (Oracle) (2):
      net: stmmac: introduce pcs_init/pcs_exit stmmac operations
      net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml |  66 +++++++++++++
 MAINTAINERS                                        |   6 ++
 arch/arm/boot/dts/renesas/r9a06g032.dtsi           |  19 ++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 +++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c   |  88 +++++++++++++++++
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 109 +++++++++++----------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  14 +++
 include/linux/stmmac.h                             |   2 +
 9 files changed, 263 insertions(+), 54 deletions(-)
---
base-commit: f1e197a665c2148ebc25fe09c53689e60afea195
change-id: 20240402-rzn1-gmac1-685cf8793d0e

Best regards,
-- 
Romain Gantois <romain.gantois@bootlin.com>

[PATCH net-next v3 0/5] net: stmmac: Add support for RZN1 GMAC devices

[Romain Gantois]

Hello everyone,

This is version three of my series that adds support for a Gigabit Ethernet
controller featured in the Renesas r9a06g032 SoC, of the RZ/N1 family. This
GMAC device is based on a Synopsys IP and is compatible with the stmmac driver.

My former colleague Clément Léger originally sent a series for this driver,
but an issue in bringing up the PCS clock had blocked the upstreaming
process. This issue has since been resolved by the following series:

https://lore.kernel.org/all/20240326-rxc_bugfix-v6-0-24a74e5c761f@bootlin.com/

This series consists of a devicetree binding describing the RZN1 GMAC
controller IP, a node for the GMAC1 device in the r9a06g032 SoC device
tree, and the GMAC driver itself which is a glue layer in stmmac.

There are also two patches by Russell that improve pcs initialization handling
in stmmac.

Best Regards,

Romain Gantois

---
Changes in v3:
- Fixed a typo in the socfpga patch
- Link to v2: https://lore.kernel.org/r/20240409-rzn1-gmac1-v2-0-79ca45f2fc79@bootlin.com

Changes in v2:
- Add pcs_init/exit callbacks in stmmac to solve race condition
- Use pcs_init/exit callbacks in dwmac_socfpga glue layer
- Miscellaneous device tree binding corrections
- Link to v1: https://lore.kernel.org/r/20240402-rzn1-gmac1-v1-0-5be2b2894d8c@bootlin.com

---
Clément Léger (3):
      dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
      net: stmmac: add support for RZ/N1 GMAC
      ARM: dts: r9a06g032: describe GMAC1

Russell King (Oracle) (2):
      net: stmmac: introduce pcs_init/pcs_exit stmmac operations
      net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml |  66 +++++++++++++
 MAINTAINERS                                        |   6 ++
 arch/arm/boot/dts/renesas/r9a06g032.dtsi           |  19 ++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 +++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c   |  88 +++++++++++++++++
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 109 +++++++++++----------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  14 +++
 include/linux/stmmac.h                             |   2 +
 9 files changed, 263 insertions(+), 54 deletions(-)
---
base-commit: f1e197a665c2148ebc25fe09c53689e60afea195
change-id: 20240402-rzn1-gmac1-685cf8793d0e

Best regards,
-- 
Romain Gantois <romain.gantois@bootlin.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH net-next v3 1/5] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
These controllers are based on Synopsys IPs. They can be connected to
RZ/N1 RGMII/RMII converters.

Add a binding that describes these GMAC devices.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[rgantois: commit log]
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
new file mode 100644
index 0000000000000..d9a8d586e260c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas GMAC
+
+maintainers:
+  - Romain Gantois <romain.gantois@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a06g032-gmac
+          - renesas,rzn1-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-gmac
+      - const: renesas,rzn1-gmac
+      - const: snps,dwmac
+
+  pcs-handle:
+    description:
+      phandle pointing to a PCS sub-node compatible with
+      renesas,rzn1-miic.yaml#
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@44000000 {
+      compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+      reg = <0x44000000 0x2000>;
+      interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+      clock-names = "stmmaceth";
+      clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+      power-domains = <&sysctrl>;
+      snps,multicast-filter-bins = <256>;
+      snps,perfect-filter-entries = <128>;
+      tx-fifo-depth = <2048>;
+      rx-fifo-depth = <4096>;
+      pcs-handle = <&mii_conv1>;
+      phy-mode = "mii";
+    };
+
+...

-- 
2.44.0

[PATCH net-next v3 1/5] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
These controllers are based on Synopsys IPs. They can be connected to
RZ/N1 RGMII/RMII converters.

Add a binding that describes these GMAC devices.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[rgantois: commit log]
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
new file mode 100644
index 0000000000000..d9a8d586e260c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas GMAC
+
+maintainers:
+  - Romain Gantois <romain.gantois@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a06g032-gmac
+          - renesas,rzn1-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-gmac
+      - const: renesas,rzn1-gmac
+      - const: snps,dwmac
+
+  pcs-handle:
+    description:
+      phandle pointing to a PCS sub-node compatible with
+      renesas,rzn1-miic.yaml#
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@44000000 {
+      compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+      reg = <0x44000000 0x2000>;
+      interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+      clock-names = "stmmaceth";
+      clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+      power-domains = <&sysctrl>;
+      snps,multicast-filter-bins = <256>;
+      snps,perfect-filter-entries = <128>;
+      tx-fifo-depth = <2048>;
+      rx-fifo-depth = <4096>;
+      pcs-handle = <&mii_conv1>;
+      phy-mode = "mii";
+    };
+
+...

-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Romain Gantois]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Introduce a mechanism whereby platforms can create their PCS instances
prior to the network device being published to userspace, but after
some of the core stmmac initialisation has been completed. This means
that the data structures that platforms need will be available.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++++++++
 include/linux/stmmac.h                            |  2 ++
 2 files changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe3498e86de9d..25fa33ae7017b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7208,6 +7208,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (ret)
 		return ret;
 
+	if (priv->plat->pcs_init) {
+		ret = priv->plat->pcs_init(priv, priv->hw);
+		if (ret)
+			return ret;
+	}
+
 	/* Get the HW capability (new GMAC newer than 3.50a) */
 	priv->hw_cap_support = stmmac_get_hw_features(priv);
 	if (priv->hw_cap_support) {
@@ -7290,6 +7296,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	return 0;
 }
 
+static void stmmac_hw_exit(struct stmmac_priv *priv)
+{
+	if (priv->plat->pcs_exit)
+		priv->plat->pcs_exit(priv, priv->hw);
+}
+
 static void stmmac_napi_add(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
@@ -7804,6 +7816,7 @@ int stmmac_dvr_probe(struct device *device,
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
 error_mdio_register:
+	stmmac_hw_exit(priv);
 	stmmac_napi_del(ndev);
 error_hw_init:
 	destroy_workqueue(priv->wq);
@@ -7844,6 +7857,7 @@ void stmmac_dvr_remove(struct device *dev)
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
+	stmmac_hw_exit(priv);
 	destroy_workqueue(priv->wq);
 	mutex_destroy(&priv->lock);
 	bitmap_free(priv->af_xdp_zc_qps);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index dfa1828cd756a..941fde506e514 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -285,6 +285,8 @@ struct plat_stmmacenet_data {
 	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
 			   void *ctx);
 	void (*dump_debug_regs)(void *priv);
+	int (*pcs_init)(struct stmmac_priv *priv, struct mac_device_info *hw);
+	void (*pcs_exit)(struct stmmac_priv *priv, struct mac_device_info *hw);
 	void *bsp_priv;
 	struct clk *stmmac_clk;
 	struct clk *pclk;

-- 
2.44.0

[PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Romain Gantois]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Introduce a mechanism whereby platforms can create their PCS instances
prior to the network device being published to userspace, but after
some of the core stmmac initialisation has been completed. This means
that the data structures that platforms need will be available.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++++++++
 include/linux/stmmac.h                            |  2 ++
 2 files changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe3498e86de9d..25fa33ae7017b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7208,6 +7208,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (ret)
 		return ret;
 
+	if (priv->plat->pcs_init) {
+		ret = priv->plat->pcs_init(priv, priv->hw);
+		if (ret)
+			return ret;
+	}
+
 	/* Get the HW capability (new GMAC newer than 3.50a) */
 	priv->hw_cap_support = stmmac_get_hw_features(priv);
 	if (priv->hw_cap_support) {
@@ -7290,6 +7296,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	return 0;
 }
 
+static void stmmac_hw_exit(struct stmmac_priv *priv)
+{
+	if (priv->plat->pcs_exit)
+		priv->plat->pcs_exit(priv, priv->hw);
+}
+
 static void stmmac_napi_add(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
@@ -7804,6 +7816,7 @@ int stmmac_dvr_probe(struct device *device,
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
 error_mdio_register:
+	stmmac_hw_exit(priv);
 	stmmac_napi_del(ndev);
 error_hw_init:
 	destroy_workqueue(priv->wq);
@@ -7844,6 +7857,7 @@ void stmmac_dvr_remove(struct device *dev)
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
+	stmmac_hw_exit(priv);
 	destroy_workqueue(priv->wq);
 	mutex_destroy(&priv->lock);
 	bitmap_free(priv->af_xdp_zc_qps);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index dfa1828cd756a..941fde506e514 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -285,6 +285,8 @@ struct plat_stmmacenet_data {
 	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
 			   void *ctx);
 	void (*dump_debug_regs)(void *priv);
+	int (*pcs_init)(struct stmmac_priv *priv, struct mac_device_info *hw);
+	void (*pcs_exit)(struct stmmac_priv *priv, struct mac_device_info *hw);
 	void *bsp_priv;
 	struct clk *stmmac_clk;
 	struct clk *pclk;

-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH net-next v3 3/5] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

[Romain Gantois]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Use the newly introduced pcs_init() and pcs_exit() operations to
create and destroy the PCS instance at a more appropriate moment during
the driver lifecycle, thereby avoiding publishing a network device to
userspace that has not yet finished its PCS initialisation.

There are other similar issues with this driver which remain
unaddressed, but these are out of scope for this patch.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 109 +++++++++++----------
 1 file changed, 55 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 12b4a80ea3aa1..339cc42c776fb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -379,6 +379,58 @@ static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac)
 	return 0;
 }
 
+static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv,
+				  struct mac_device_info *hw)
+{
+	struct socfpga_dwmac *dwmac = priv->plat->bsp_priv;
+	struct regmap_config pcs_regmap_cfg = {
+		.reg_bits = 16,
+		.val_bits = 16,
+		.reg_shift = REGMAP_UPSHIFT(1),
+	};
+	struct mdio_regmap_config mrc;
+	struct regmap *pcs_regmap;
+	struct phylink_pcs *pcs;
+	struct mii_bus *pcs_bus;
+
+	if (!dwmac->tse_pcs_base)
+		return 0;
+
+	pcs_regmap = devm_regmap_init_mmio(priv->device, dwmac->tse_pcs_base,
+					   &pcs_regmap_cfg);
+	if (IS_ERR(pcs_regmap))
+		return PTR_ERR(pcs_regmap);
+
+	memset(&mrc, 0, sizeof(mrc));
+	mrc.regmap = pcs_regmap;
+	mrc.parent = priv->device;
+	mrc.valid_addr = 0x0;
+	mrc.autoscan = false;
+
+	/* Can't use ndev->name here because it will not have been initialised,
+	 * and in any case, the user can rename network interfaces at runtime.
+	 */
+	snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii",
+		 dev_name(priv->device));
+	pcs_bus = devm_mdio_regmap_register(priv->device, &mrc);
+	if (IS_ERR(pcs_bus))
+		return PTR_ERR(pcs_bus);
+
+	pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
+	if (IS_ERR(pcs))
+		return PTR_ERR(pcs);
+
+	hw->phylink_pcs = pcs;
+	return 0;
+}
+
+static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv,
+				   struct mac_device_info *hw)
+{
+	if (hw->phylink_pcs)
+		lynx_pcs_destroy(hw->phylink_pcs);
+}
+
 static int socfpga_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -426,6 +478,8 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	dwmac->ops = ops;
 	plat_dat->bsp_priv = dwmac;
 	plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
+	plat_dat->pcs_init = socfpga_dwmac_pcs_init;
+	plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
@@ -444,48 +498,6 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_dvr_remove;
 
-	/* Create a regmap for the PCS so that it can be used by the PCS driver,
-	 * if we have such a PCS
-	 */
-	if (dwmac->tse_pcs_base) {
-		struct regmap_config pcs_regmap_cfg;
-		struct mdio_regmap_config mrc;
-		struct regmap *pcs_regmap;
-		struct mii_bus *pcs_bus;
-
-		memset(&pcs_regmap_cfg, 0, sizeof(pcs_regmap_cfg));
-		memset(&mrc, 0, sizeof(mrc));
-
-		pcs_regmap_cfg.reg_bits = 16;
-		pcs_regmap_cfg.val_bits = 16;
-		pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(1);
-
-		pcs_regmap = devm_regmap_init_mmio(&pdev->dev, dwmac->tse_pcs_base,
-						   &pcs_regmap_cfg);
-		if (IS_ERR(pcs_regmap)) {
-			ret = PTR_ERR(pcs_regmap);
-			goto err_dvr_remove;
-		}
-
-		mrc.regmap = pcs_regmap;
-		mrc.parent = &pdev->dev;
-		mrc.valid_addr = 0x0;
-		mrc.autoscan = false;
-
-		snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii", ndev->name);
-		pcs_bus = devm_mdio_regmap_register(&pdev->dev, &mrc);
-		if (IS_ERR(pcs_bus)) {
-			ret = PTR_ERR(pcs_bus);
-			goto err_dvr_remove;
-		}
-
-		stpriv->hw->phylink_pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
-		if (IS_ERR(stpriv->hw->phylink_pcs)) {
-			ret = PTR_ERR(stpriv->hw->phylink_pcs);
-			goto err_dvr_remove;
-		}
-	}
-
 	return 0;
 
 err_dvr_remove:
@@ -494,17 +506,6 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static void socfpga_dwmac_remove(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct stmmac_priv *priv = netdev_priv(ndev);
-	struct phylink_pcs *pcs = priv->hw->phylink_pcs;
-
-	stmmac_pltfr_remove(pdev);
-
-	lynx_pcs_destroy(pcs);
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int socfpga_dwmac_resume(struct device *dev)
 {
@@ -576,7 +577,7 @@ MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
 
 static struct platform_driver socfpga_dwmac_driver = {
 	.probe  = socfpga_dwmac_probe,
-	.remove_new = socfpga_dwmac_remove,
+	.remove_new = stmmac_pltfr_remove,
 	.driver = {
 		.name           = "socfpga-dwmac",
 		.pm		= &socfpga_dwmac_pm_ops,

-- 
2.44.0

[PATCH net-next v3 3/5] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

[Romain Gantois]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Use the newly introduced pcs_init() and pcs_exit() operations to
create and destroy the PCS instance at a more appropriate moment during
the driver lifecycle, thereby avoiding publishing a network device to
userspace that has not yet finished its PCS initialisation.

There are other similar issues with this driver which remain
unaddressed, but these are out of scope for this patch.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 109 +++++++++++----------
 1 file changed, 55 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 12b4a80ea3aa1..339cc42c776fb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -379,6 +379,58 @@ static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac)
 	return 0;
 }
 
+static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv,
+				  struct mac_device_info *hw)
+{
+	struct socfpga_dwmac *dwmac = priv->plat->bsp_priv;
+	struct regmap_config pcs_regmap_cfg = {
+		.reg_bits = 16,
+		.val_bits = 16,
+		.reg_shift = REGMAP_UPSHIFT(1),
+	};
+	struct mdio_regmap_config mrc;
+	struct regmap *pcs_regmap;
+	struct phylink_pcs *pcs;
+	struct mii_bus *pcs_bus;
+
+	if (!dwmac->tse_pcs_base)
+		return 0;
+
+	pcs_regmap = devm_regmap_init_mmio(priv->device, dwmac->tse_pcs_base,
+					   &pcs_regmap_cfg);
+	if (IS_ERR(pcs_regmap))
+		return PTR_ERR(pcs_regmap);
+
+	memset(&mrc, 0, sizeof(mrc));
+	mrc.regmap = pcs_regmap;
+	mrc.parent = priv->device;
+	mrc.valid_addr = 0x0;
+	mrc.autoscan = false;
+
+	/* Can't use ndev->name here because it will not have been initialised,
+	 * and in any case, the user can rename network interfaces at runtime.
+	 */
+	snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii",
+		 dev_name(priv->device));
+	pcs_bus = devm_mdio_regmap_register(priv->device, &mrc);
+	if (IS_ERR(pcs_bus))
+		return PTR_ERR(pcs_bus);
+
+	pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
+	if (IS_ERR(pcs))
+		return PTR_ERR(pcs);
+
+	hw->phylink_pcs = pcs;
+	return 0;
+}
+
+static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv,
+				   struct mac_device_info *hw)
+{
+	if (hw->phylink_pcs)
+		lynx_pcs_destroy(hw->phylink_pcs);
+}
+
 static int socfpga_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -426,6 +478,8 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	dwmac->ops = ops;
 	plat_dat->bsp_priv = dwmac;
 	plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
+	plat_dat->pcs_init = socfpga_dwmac_pcs_init;
+	plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
@@ -444,48 +498,6 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_dvr_remove;
 
-	/* Create a regmap for the PCS so that it can be used by the PCS driver,
-	 * if we have such a PCS
-	 */
-	if (dwmac->tse_pcs_base) {
-		struct regmap_config pcs_regmap_cfg;
-		struct mdio_regmap_config mrc;
-		struct regmap *pcs_regmap;
-		struct mii_bus *pcs_bus;
-
-		memset(&pcs_regmap_cfg, 0, sizeof(pcs_regmap_cfg));
-		memset(&mrc, 0, sizeof(mrc));
-
-		pcs_regmap_cfg.reg_bits = 16;
-		pcs_regmap_cfg.val_bits = 16;
-		pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(1);
-
-		pcs_regmap = devm_regmap_init_mmio(&pdev->dev, dwmac->tse_pcs_base,
-						   &pcs_regmap_cfg);
-		if (IS_ERR(pcs_regmap)) {
-			ret = PTR_ERR(pcs_regmap);
-			goto err_dvr_remove;
-		}
-
-		mrc.regmap = pcs_regmap;
-		mrc.parent = &pdev->dev;
-		mrc.valid_addr = 0x0;
-		mrc.autoscan = false;
-
-		snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii", ndev->name);
-		pcs_bus = devm_mdio_regmap_register(&pdev->dev, &mrc);
-		if (IS_ERR(pcs_bus)) {
-			ret = PTR_ERR(pcs_bus);
-			goto err_dvr_remove;
-		}
-
-		stpriv->hw->phylink_pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
-		if (IS_ERR(stpriv->hw->phylink_pcs)) {
-			ret = PTR_ERR(stpriv->hw->phylink_pcs);
-			goto err_dvr_remove;
-		}
-	}
-
 	return 0;
 
 err_dvr_remove:
@@ -494,17 +506,6 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static void socfpga_dwmac_remove(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct stmmac_priv *priv = netdev_priv(ndev);
-	struct phylink_pcs *pcs = priv->hw->phylink_pcs;
-
-	stmmac_pltfr_remove(pdev);
-
-	lynx_pcs_destroy(pcs);
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int socfpga_dwmac_resume(struct device *dev)
 {
@@ -576,7 +577,7 @@ MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
 
 static struct platform_driver socfpga_dwmac_driver = {
 	.probe  = socfpga_dwmac_probe,
-	.remove_new = socfpga_dwmac_remove,
+	.remove_new = stmmac_pltfr_remove,
 	.driver = {
 		.name           = "socfpga-dwmac",
 		.pm		= &socfpga_dwmac_pm_ops,

-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

Add support for the Renesas RZ/N1 GMAC. This support can make use of a
custom RZ/N1 PCS which is fetched by parsing the pcs-handle device tree
property.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 MAINTAINERS                                      |  6 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig      | 12 ++++
 drivers/net/ethernet/stmicro/stmmac/Makefile     |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c | 88 ++++++++++++++++++++++++
 4 files changed, 107 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5ba3fe6ac09ce..20f92241e0058 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18845,6 +18845,12 @@ F:	include/dt-bindings/net/pcs-rzn1-miic.h
 F:	include/linux/pcs-rzn1-miic.h
 F:	net/dsa/tag_rzn1_a5psw.c
 
+RENESAS RZ/N1 DWMAC GLUE LAYER
+M:	Romain Gantois <romain.gantois@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
+
 RENESAS RZ/N1 RTC CONTROLLER DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-rtc@vger.kernel.org
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 4ec61f1ee71a2..05cc07b8f48c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -142,6 +142,18 @@ config DWMAC_ROCKCHIP
 	  This selects the Rockchip RK3288 SoC glue layer support for
 	  the stmmac device driver.
 
+config DWMAC_RZN1
+	tristate "Renesas RZ/N1 dwmac support"
+	default ARCH_RZN1
+	depends on OF && (ARCH_RZN1 || COMPILE_TEST)
+	select PCS_RZN1_MIIC
+	help
+	  Support for Ethernet controller on Renesas RZ/N1 SoC family.
+
+	  This selects the Renesas RZ/N1 SoC glue layer support for
+	  the stmmac device driver. This support can make use of a custom MII
+	  converter PCS device.
+
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_INTEL_SOCFPGA
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 26cad4344701e..c2f0e91f6bf83 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DWMAC_MEDIATEK)	+= dwmac-mediatek.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
 obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
+obj-$(CONFIG_DWMAC_RZN1)	+= dwmac-rzn1.o
 obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-altr-socfpga.o
 obj-$(CONFIG_DWMAC_STARFIVE)	+= dwmac-starfive.o
 obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
new file mode 100644
index 0000000000000..e85524c2017cf
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 Schneider-Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/of.h>
+#include <linux/pcs-rzn1-miic.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+
+#include "stmmac_platform.h"
+#include "stmmac.h"
+
+static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
+			       struct mac_device_info *hw)
+{
+	struct device_node *np = priv->device->of_node;
+	struct device_node *pcs_node;
+	struct phylink_pcs *pcs;
+
+	pcs_node = of_parse_phandle(np, "pcs-handle", 0);
+
+	if (pcs_node) {
+		pcs = miic_create(priv->device, pcs_node);
+		of_node_put(pcs_node);
+		if (IS_ERR(pcs))
+			return PTR_ERR(pcs);
+
+		priv->hw->phylink_pcs = pcs;
+	}
+
+	return 0;
+}
+
+static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv,
+				struct mac_device_info *hw)
+{
+	if (priv->hw->phylink_pcs)
+		miic_destroy(priv->hw->phylink_pcs);
+}
+
+static int rzn1_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	plat_dat->bsp_priv = plat_dat;
+	plat_dat->pcs_init = rzn1_dwmac_pcs_init;
+	plat_dat->pcs_exit = rzn1_dwmac_pcs_exit;
+
+	ret = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id rzn1_dwmac_match[] = {
+	{ .compatible = "renesas,rzn1-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rzn1_dwmac_match);
+
+static struct platform_driver rzn1_dwmac_driver = {
+	.probe  = rzn1_dwmac_probe,
+	.remove_new = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "rzn1-dwmac",
+		.of_match_table = rzn1_dwmac_match,
+	},
+};
+module_platform_driver(rzn1_dwmac_driver);
+
+MODULE_AUTHOR("Clément Léger <clement.leger@bootlin.com>");
+MODULE_DESCRIPTION("Renesas RZN1 DWMAC specific glue layer");
+MODULE_LICENSE("GPL");

-- 
2.44.0

[PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

Add support for the Renesas RZ/N1 GMAC. This support can make use of a
custom RZ/N1 PCS which is fetched by parsing the pcs-handle device tree
property.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 MAINTAINERS                                      |  6 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig      | 12 ++++
 drivers/net/ethernet/stmicro/stmmac/Makefile     |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c | 88 ++++++++++++++++++++++++
 4 files changed, 107 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5ba3fe6ac09ce..20f92241e0058 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18845,6 +18845,12 @@ F:	include/dt-bindings/net/pcs-rzn1-miic.h
 F:	include/linux/pcs-rzn1-miic.h
 F:	net/dsa/tag_rzn1_a5psw.c
 
+RENESAS RZ/N1 DWMAC GLUE LAYER
+M:	Romain Gantois <romain.gantois@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
+
 RENESAS RZ/N1 RTC CONTROLLER DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-rtc@vger.kernel.org
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 4ec61f1ee71a2..05cc07b8f48c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -142,6 +142,18 @@ config DWMAC_ROCKCHIP
 	  This selects the Rockchip RK3288 SoC glue layer support for
 	  the stmmac device driver.
 
+config DWMAC_RZN1
+	tristate "Renesas RZ/N1 dwmac support"
+	default ARCH_RZN1
+	depends on OF && (ARCH_RZN1 || COMPILE_TEST)
+	select PCS_RZN1_MIIC
+	help
+	  Support for Ethernet controller on Renesas RZ/N1 SoC family.
+
+	  This selects the Renesas RZ/N1 SoC glue layer support for
+	  the stmmac device driver. This support can make use of a custom MII
+	  converter PCS device.
+
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_INTEL_SOCFPGA
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 26cad4344701e..c2f0e91f6bf83 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DWMAC_MEDIATEK)	+= dwmac-mediatek.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
 obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
+obj-$(CONFIG_DWMAC_RZN1)	+= dwmac-rzn1.o
 obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-altr-socfpga.o
 obj-$(CONFIG_DWMAC_STARFIVE)	+= dwmac-starfive.o
 obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
new file mode 100644
index 0000000000000..e85524c2017cf
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 Schneider-Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/of.h>
+#include <linux/pcs-rzn1-miic.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+
+#include "stmmac_platform.h"
+#include "stmmac.h"
+
+static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
+			       struct mac_device_info *hw)
+{
+	struct device_node *np = priv->device->of_node;
+	struct device_node *pcs_node;
+	struct phylink_pcs *pcs;
+
+	pcs_node = of_parse_phandle(np, "pcs-handle", 0);
+
+	if (pcs_node) {
+		pcs = miic_create(priv->device, pcs_node);
+		of_node_put(pcs_node);
+		if (IS_ERR(pcs))
+			return PTR_ERR(pcs);
+
+		priv->hw->phylink_pcs = pcs;
+	}
+
+	return 0;
+}
+
+static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv,
+				struct mac_device_info *hw)
+{
+	if (priv->hw->phylink_pcs)
+		miic_destroy(priv->hw->phylink_pcs);
+}
+
+static int rzn1_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	plat_dat->bsp_priv = plat_dat;
+	plat_dat->pcs_init = rzn1_dwmac_pcs_init;
+	plat_dat->pcs_exit = rzn1_dwmac_pcs_exit;
+
+	ret = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id rzn1_dwmac_match[] = {
+	{ .compatible = "renesas,rzn1-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rzn1_dwmac_match);
+
+static struct platform_driver rzn1_dwmac_driver = {
+	.probe  = rzn1_dwmac_probe,
+	.remove_new = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "rzn1-dwmac",
+		.of_match_table = rzn1_dwmac_match,
+	},
+};
+module_platform_driver(rzn1_dwmac_driver);
+
+MODULE_AUTHOR("Clément Léger <clement.leger@bootlin.com>");
+MODULE_DESCRIPTION("Renesas RZN1 DWMAC specific glue layer");
+MODULE_LICENSE("GPL");

-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH net-next v3 5/5] ARM: dts: r9a06g032: describe GMAC1

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

The r9a06g032 SoC of the RZ/N1 family features two GMAC devices named
GMAC1/2, that are based on Synopsys cores. GMAC1 is connected to a
RGMII/RMII converter that is already described in this device tree.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 arch/arm/boot/dts/renesas/r9a06g032.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index fa63e1afc4ef4..cab7a641f95ba 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -316,6 +316,25 @@ dma1: dma-controller@40105000 {
 			data-width = <8>;
 		};
 
+		gmac1: ethernet@44000000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44000000 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			pcs-handle = <&mii_conv1>;
+			status = "disabled";
+		};
+
 		gmac2: ethernet@44002000 {
 			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
 			reg = <0x44002000 0x2000>;

-- 
2.44.0

[PATCH net-next v3 5/5] ARM: dts: r9a06g032: describe GMAC1

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

The r9a06g032 SoC of the RZ/N1 family features two GMAC devices named
GMAC1/2, that are based on Synopsys cores. GMAC1 is connected to a
RGMII/RMII converter that is already described in this device tree.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 arch/arm/boot/dts/renesas/r9a06g032.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index fa63e1afc4ef4..cab7a641f95ba 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -316,6 +316,25 @@ dma1: dma-controller@40105000 {
 			data-width = <8>;
 		};
 
+		gmac1: ethernet@44000000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44000000 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			pcs-handle = <&mii_conv1>;
+			status = "disabled";
+		};
+
 		gmac2: ethernet@44002000 {
 			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
 			reg = <0x44002000 0x2000>;

-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Serge Semin]

Hi Romain, Russell

On Mon, Apr 15, 2024 at 11:18:42AM +0200, Romain Gantois wrote:
> From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
> 
> Introduce a mechanism whereby platforms can create their PCS instances
> prior to the network device being published to userspace, but after
> some of the core stmmac initialisation has been completed. This means
> that the data structures that platforms need will be available.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++++++++
>  include/linux/stmmac.h                            |  2 ++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index fe3498e86de9d..25fa33ae7017b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -7208,6 +7208,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
>  	if (ret)
>  		return ret;
>  
> +	if (priv->plat->pcs_init) {
> +		ret = priv->plat->pcs_init(priv, priv->hw);
> +		if (ret)
> +			return ret;
> +	}
> +

I am currently working on my Memory-mapped DW XPCS patchset cooking:
https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com/
The changes in this series seems to intersect to what is/will be
introduced in my patchset. In particular as before I am going to
use the "pcs-handle" property for getting the XPCS node. If so what
about collecting PCS-related things in a single place. Like this:

int stmmac_xpcs_setup(struct net_device *ndev)
{
	...

	if (priv->plat->pcs_init) {
		return priv->plat->pcs_init(priv); /* Romain' part */
	} else if (fwnode_property_present(priv->plat->port_node, "pcs-handle")) {
		/* My DW XPCS part */
	} else if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
		/* Currently implemented procedure */
	}

	...
}

void stmmac_xpcs_clean(struct net_device *ndev)
{
	...

	if (priv->plat->pcs_exit) {
		priv->plat->pcs_exit(priv);
		return;

	}

	xpcs_destroy(priv->hw->xpcs);
	priv->hw->xpcs = NULL;
}

Please see the last two patches in my series:
https://lore.kernel.org/netdev/20231205103559.9605-16-fancer.lancer@gmail.com/
https://lore.kernel.org/netdev/20231205103559.9605-17-fancer.lancer@gmail.com/
as a reference of how the changes could be provided.

-Serge(y)

>  	/* Get the HW capability (new GMAC newer than 3.50a) */
>  	priv->hw_cap_support = stmmac_get_hw_features(priv);
>  	if (priv->hw_cap_support) {
> @@ -7290,6 +7296,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
>  	return 0;
>  }
>  
> +static void stmmac_hw_exit(struct stmmac_priv *priv)
> +{
> +	if (priv->plat->pcs_exit)
> +		priv->plat->pcs_exit(priv, priv->hw);
> +}
> +
>  static void stmmac_napi_add(struct net_device *dev)
>  {
>  	struct stmmac_priv *priv = netdev_priv(dev);
> @@ -7804,6 +7816,7 @@ int stmmac_dvr_probe(struct device *device,
>  	    priv->hw->pcs != STMMAC_PCS_RTBI)
>  		stmmac_mdio_unregister(ndev);
>  error_mdio_register:
> +	stmmac_hw_exit(priv);
>  	stmmac_napi_del(ndev);
>  error_hw_init:
>  	destroy_workqueue(priv->wq);
> @@ -7844,6 +7857,7 @@ void stmmac_dvr_remove(struct device *dev)
>  	if (priv->hw->pcs != STMMAC_PCS_TBI &&
>  	    priv->hw->pcs != STMMAC_PCS_RTBI)
>  		stmmac_mdio_unregister(ndev);
> +	stmmac_hw_exit(priv);
>  	destroy_workqueue(priv->wq);
>  	mutex_destroy(&priv->lock);
>  	bitmap_free(priv->af_xdp_zc_qps);
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index dfa1828cd756a..941fde506e514 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -285,6 +285,8 @@ struct plat_stmmacenet_data {
>  	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
>  			   void *ctx);
>  	void (*dump_debug_regs)(void *priv);
> +	int (*pcs_init)(struct stmmac_priv *priv, struct mac_device_info *hw);
> +	void (*pcs_exit)(struct stmmac_priv *priv, struct mac_device_info *hw);
>  	void *bsp_priv;
>  	struct clk *stmmac_clk;
>  	struct clk *pclk;
> 
> -- 
> 2.44.0
> 
> 

Re: [PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Serge Semin]

Hi Romain, Russell

On Mon, Apr 15, 2024 at 11:18:42AM +0200, Romain Gantois wrote:
> From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
> 
> Introduce a mechanism whereby platforms can create their PCS instances
> prior to the network device being published to userspace, but after
> some of the core stmmac initialisation has been completed. This means
> that the data structures that platforms need will be available.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++++++++
>  include/linux/stmmac.h                            |  2 ++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index fe3498e86de9d..25fa33ae7017b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -7208,6 +7208,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
>  	if (ret)
>  		return ret;
>  
> +	if (priv->plat->pcs_init) {
> +		ret = priv->plat->pcs_init(priv, priv->hw);
> +		if (ret)
> +			return ret;
> +	}
> +

I am currently working on my Memory-mapped DW XPCS patchset cooking:
https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com/
The changes in this series seems to intersect to what is/will be
introduced in my patchset. In particular as before I am going to
use the "pcs-handle" property for getting the XPCS node. If so what
about collecting PCS-related things in a single place. Like this:

int stmmac_xpcs_setup(struct net_device *ndev)
{
	...

	if (priv->plat->pcs_init) {
		return priv->plat->pcs_init(priv); /* Romain' part */
	} else if (fwnode_property_present(priv->plat->port_node, "pcs-handle")) {
		/* My DW XPCS part */
	} else if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
		/* Currently implemented procedure */
	}

	...
}

void stmmac_xpcs_clean(struct net_device *ndev)
{
	...

	if (priv->plat->pcs_exit) {
		priv->plat->pcs_exit(priv);
		return;

	}

	xpcs_destroy(priv->hw->xpcs);
	priv->hw->xpcs = NULL;
}

Please see the last two patches in my series:
https://lore.kernel.org/netdev/20231205103559.9605-16-fancer.lancer@gmail.com/
https://lore.kernel.org/netdev/20231205103559.9605-17-fancer.lancer@gmail.com/
as a reference of how the changes could be provided.

-Serge(y)

>  	/* Get the HW capability (new GMAC newer than 3.50a) */
>  	priv->hw_cap_support = stmmac_get_hw_features(priv);
>  	if (priv->hw_cap_support) {
> @@ -7290,6 +7296,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
>  	return 0;
>  }
>  
> +static void stmmac_hw_exit(struct stmmac_priv *priv)
> +{
> +	if (priv->plat->pcs_exit)
> +		priv->plat->pcs_exit(priv, priv->hw);
> +}
> +
>  static void stmmac_napi_add(struct net_device *dev)
>  {
>  	struct stmmac_priv *priv = netdev_priv(dev);
> @@ -7804,6 +7816,7 @@ int stmmac_dvr_probe(struct device *device,
>  	    priv->hw->pcs != STMMAC_PCS_RTBI)
>  		stmmac_mdio_unregister(ndev);
>  error_mdio_register:
> +	stmmac_hw_exit(priv);
>  	stmmac_napi_del(ndev);
>  error_hw_init:
>  	destroy_workqueue(priv->wq);
> @@ -7844,6 +7857,7 @@ void stmmac_dvr_remove(struct device *dev)
>  	if (priv->hw->pcs != STMMAC_PCS_TBI &&
>  	    priv->hw->pcs != STMMAC_PCS_RTBI)
>  		stmmac_mdio_unregister(ndev);
> +	stmmac_hw_exit(priv);
>  	destroy_workqueue(priv->wq);
>  	mutex_destroy(&priv->lock);
>  	bitmap_free(priv->af_xdp_zc_qps);
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index dfa1828cd756a..941fde506e514 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -285,6 +285,8 @@ struct plat_stmmacenet_data {
>  	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
>  			   void *ctx);
>  	void (*dump_debug_regs)(void *priv);
> +	int (*pcs_init)(struct stmmac_priv *priv, struct mac_device_info *hw);
> +	void (*pcs_exit)(struct stmmac_priv *priv, struct mac_device_info *hw);
>  	void *bsp_priv;
>  	struct clk *stmmac_clk;
>  	struct clk *pclk;
> 
> -- 
> 2.44.0
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Serge Semin]

On Mon, Apr 15, 2024 at 11:18:44AM +0200, Romain Gantois wrote:
> [...]
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
> new file mode 100644
> index 0000000000000..e85524c2017cf
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
> @@ -0,0 +1,88 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2024 Schneider-Electric
> + *
> + * Clément Léger <clement.leger@bootlin.com>
> + */
> +
> +#include <linux/of.h>
> +#include <linux/pcs-rzn1-miic.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +
> +#include "stmmac_platform.h"
> +#include "stmmac.h"
> +
> +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,

> +			       struct mac_device_info *hw)

AFAICS hw is unused, and the mac_device_info instance is reached via
the priv pointer. What about dropping the unused argument then?

> +{
> +	struct device_node *np = priv->device->of_node;
> +	struct device_node *pcs_node;
> +	struct phylink_pcs *pcs;
> +
> +	pcs_node = of_parse_phandle(np, "pcs-handle", 0);
> +
> +	if (pcs_node) {
> +		pcs = miic_create(priv->device, pcs_node);
> +		of_node_put(pcs_node);
> +		if (IS_ERR(pcs))
> +			return PTR_ERR(pcs);
> +
> +		priv->hw->phylink_pcs = pcs;
> +	}
> +
> +	return 0;
> +}
> +
> +static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv,

> +				struct mac_device_info *hw)

ditto.

-Serge(y)

> +{
> +	if (priv->hw->phylink_pcs)
> +		miic_destroy(priv->hw->phylink_pcs);
> +}
> +
> [...]

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Serge Semin]

On Mon, Apr 15, 2024 at 11:18:44AM +0200, Romain Gantois wrote:
> [...]
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
> new file mode 100644
> index 0000000000000..e85524c2017cf
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
> @@ -0,0 +1,88 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2024 Schneider-Electric
> + *
> + * Clément Léger <clement.leger@bootlin.com>
> + */
> +
> +#include <linux/of.h>
> +#include <linux/pcs-rzn1-miic.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +
> +#include "stmmac_platform.h"
> +#include "stmmac.h"
> +
> +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,

> +			       struct mac_device_info *hw)

AFAICS hw is unused, and the mac_device_info instance is reached via
the priv pointer. What about dropping the unused argument then?

> +{
> +	struct device_node *np = priv->device->of_node;
> +	struct device_node *pcs_node;
> +	struct phylink_pcs *pcs;
> +
> +	pcs_node = of_parse_phandle(np, "pcs-handle", 0);
> +
> +	if (pcs_node) {
> +		pcs = miic_create(priv->device, pcs_node);
> +		of_node_put(pcs_node);
> +		if (IS_ERR(pcs))
> +			return PTR_ERR(pcs);
> +
> +		priv->hw->phylink_pcs = pcs;
> +	}
> +
> +	return 0;
> +}
> +
> +static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv,

> +				struct mac_device_info *hw)

ditto.

-Serge(y)

> +{
> +	if (priv->hw->phylink_pcs)
> +		miic_destroy(priv->hw->phylink_pcs);
> +}
> +
> [...]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Romain Gantois]

Hi Serge,

On Tue, 16 Apr 2024, Serge Semin wrote:

> I am currently working on my Memory-mapped DW XPCS patchset cooking:
> https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com/
> The changes in this series seems to intersect to what is/will be
> introduced in my patchset. In particular as before I am going to
> use the "pcs-handle" property for getting the XPCS node. If so what
> about collecting PCS-related things in a single place. Like this:
> 
> int stmmac_xpcs_setup(struct net_device *ndev)
> {
> 	...
> 
> 	if (priv->plat->pcs_init) {
> 		return priv->plat->pcs_init(priv); /* Romain' part */
>	} else if (fwnode_property_present(priv->plat->port_node, "pcs-handle")) {
> 		/* My DW XPCS part */
> 	} else if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> 		/* Currently implemented procedure */
> 	}
> 
> 	...
> }

That seems like a good idea to me, although those setup functions would have to 
be renamed to stmmac_pcs_setup/exit.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Romain Gantois]

Hi Serge,

On Tue, 16 Apr 2024, Serge Semin wrote:

> I am currently working on my Memory-mapped DW XPCS patchset cooking:
> https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com/
> The changes in this series seems to intersect to what is/will be
> introduced in my patchset. In particular as before I am going to
> use the "pcs-handle" property for getting the XPCS node. If so what
> about collecting PCS-related things in a single place. Like this:
> 
> int stmmac_xpcs_setup(struct net_device *ndev)
> {
> 	...
> 
> 	if (priv->plat->pcs_init) {
> 		return priv->plat->pcs_init(priv); /* Romain' part */
>	} else if (fwnode_property_present(priv->plat->port_node, "pcs-handle")) {
> 		/* My DW XPCS part */
> 	} else if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> 		/* Currently implemented procedure */
> 	}
> 
> 	...
> }

That seems like a good idea to me, although those setup functions would have to 
be renamed to stmmac_pcs_setup/exit.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Serge Semin]

On Wed, Apr 17, 2024 at 11:30:09AM +0200, Romain Gantois wrote:
> Hi Serge,
> 
> On Tue, 16 Apr 2024, Serge Semin wrote:
> 
> > I am currently working on my Memory-mapped DW XPCS patchset cooking:
> > https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com/
> > The changes in this series seems to intersect to what is/will be
> > introduced in my patchset. In particular as before I am going to
> > use the "pcs-handle" property for getting the XPCS node. If so what
> > about collecting PCS-related things in a single place. Like this:
> > 
> > int stmmac_xpcs_setup(struct net_device *ndev)
> > {
> > 	...
> > 
> > 	if (priv->plat->pcs_init) {
> > 		return priv->plat->pcs_init(priv); /* Romain' part */
> >	} else if (fwnode_property_present(priv->plat->port_node, "pcs-handle")) {
> > 		/* My DW XPCS part */
> > 	} else if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> > 		/* Currently implemented procedure */
> > 	}
> > 
> > 	...
> > }
> 
> That seems like a good idea to me, although those setup functions would have to 
> be renamed to stmmac_pcs_setup/exit.

Why not, seeing they will be responsible for any PCS attached to the
MAC.

-Serge(y)

> 
> Thanks,
> 
> -- 
> Romain Gantois, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

Re: [PATCH net-next v3 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Serge Semin]

On Wed, Apr 17, 2024 at 11:30:09AM +0200, Romain Gantois wrote:
> Hi Serge,
> 
> On Tue, 16 Apr 2024, Serge Semin wrote:
> 
> > I am currently working on my Memory-mapped DW XPCS patchset cooking:
> > https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com/
> > The changes in this series seems to intersect to what is/will be
> > introduced in my patchset. In particular as before I am going to
> > use the "pcs-handle" property for getting the XPCS node. If so what
> > about collecting PCS-related things in a single place. Like this:
> > 
> > int stmmac_xpcs_setup(struct net_device *ndev)
> > {
> > 	...
> > 
> > 	if (priv->plat->pcs_init) {
> > 		return priv->plat->pcs_init(priv); /* Romain' part */
> >	} else if (fwnode_property_present(priv->plat->port_node, "pcs-handle")) {
> > 		/* My DW XPCS part */
> > 	} else if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> > 		/* Currently implemented procedure */
> > 	}
> > 
> > 	...
> > }
> 
> That seems like a good idea to me, although those setup functions would have to 
> be renamed to stmmac_pcs_setup/exit.

Why not, seeing they will be responsible for any PCS attached to the
MAC.

-Serge(y)

> 
> Thanks,
> 
> -- 
> Romain Gantois, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 1/5] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support

[Geert Uytterhoeven]

On Mon, Apr 15, 2024 at 11:18 AM Romain Gantois
<romain.gantois@bootlin.com> wrote:
> From: Clément Léger <clement.leger@bootlin.com>
>
> The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
> These controllers are based on Synopsys IPs. They can be connected to
> RZ/N1 RGMII/RMII converters.
>
> Add a binding that describes these GMAC devices.
>
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> [rgantois: commit log]
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>

LGTM, so
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH net-next v3 1/5] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support

[Geert Uytterhoeven]

On Mon, Apr 15, 2024 at 11:18 AM Romain Gantois
<romain.gantois@bootlin.com> wrote:
> From: Clément Léger <clement.leger@bootlin.com>
>
> The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
> These controllers are based on Synopsys IPs. They can be connected to
> RZ/N1 RGMII/RMII converters.
>
> Add a binding that describes these GMAC devices.
>
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> [rgantois: commit log]
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>

LGTM, so
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 5/5] ARM: dts: r9a06g032: describe GMAC1

[Geert Uytterhoeven]

Hi Romain,

On Mon, Apr 15, 2024 at 11:18 AM Romain Gantois
<romain.gantois@bootlin.com> wrote:
> From: Clément Léger <clement.leger@bootlin.com>
>
> The r9a06g032 SoC of the RZ/N1 family features two GMAC devices named
> GMAC1/2, that are based on Synopsys cores. GMAC1 is connected to a
> RGMII/RMII converter that is already described in this device tree.
>
> Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
> [rgantois: commit log]
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
> +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
> @@ -316,6 +316,25 @@ dma1: dma-controller@40105000 {
>                         data-width = <8>;
>                 };
>
> +               gmac1: ethernet@44000000 {
> +                       compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
> +                       reg = <0x44000000 0x2000>;
> +                       interrupt-parent = <&gic>;

The surrounding "soc" node already specifies the interrupt parent,
so there is no need to repeat that. I could fix that while applying
to renesas-devel for v6.10, but it looks like there will be a v4 for
the rest of the series anyway?

The rest LGTM, so with the above fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> +                       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
> +                       clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
> +                       clock-names = "stmmaceth";
> +                       power-domains = <&sysctrl>;
> +                       snps,multicast-filter-bins = <256>;
> +                       snps,perfect-filter-entries = <128>;
> +                       tx-fifo-depth = <2048>;
> +                       rx-fifo-depth = <4096>;
> +                       pcs-handle = <&mii_conv1>;
> +                       status = "disabled";
> +               };
> +
>                 gmac2: ethernet@44002000 {
>                         compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
>                         reg = <0x44002000 0x2000>;
>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH net-next v3 5/5] ARM: dts: r9a06g032: describe GMAC1

[Geert Uytterhoeven]

Hi Romain,

On Mon, Apr 15, 2024 at 11:18 AM Romain Gantois
<romain.gantois@bootlin.com> wrote:
> From: Clément Léger <clement.leger@bootlin.com>
>
> The r9a06g032 SoC of the RZ/N1 family features two GMAC devices named
> GMAC1/2, that are based on Synopsys cores. GMAC1 is connected to a
> RGMII/RMII converter that is already described in this device tree.
>
> Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
> [rgantois: commit log]
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
> +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
> @@ -316,6 +316,25 @@ dma1: dma-controller@40105000 {
>                         data-width = <8>;
>                 };
>
> +               gmac1: ethernet@44000000 {
> +                       compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
> +                       reg = <0x44000000 0x2000>;
> +                       interrupt-parent = <&gic>;

The surrounding "soc" node already specifies the interrupt parent,
so there is no need to repeat that. I could fix that while applying
to renesas-devel for v6.10, but it looks like there will be a v4 for
the rest of the series anyway?

The rest LGTM, so with the above fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> +                       interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
> +                       clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
> +                       clock-names = "stmmaceth";
> +                       power-domains = <&sysctrl>;
> +                       snps,multicast-filter-bins = <256>;
> +                       snps,perfect-filter-entries = <128>;
> +                       tx-fifo-depth = <2048>;
> +                       rx-fifo-depth = <4096>;
> +                       pcs-handle = <&mii_conv1>;
> +                       status = "disabled";
> +               };
> +
>                 gmac2: ethernet@44002000 {
>                         compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
>                         reg = <0x44002000 0x2000>;
>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 5/5] ARM: dts: r9a06g032: describe GMAC1

[Romain Gantois]

Hi Geert,

On Thu, 18 Apr 2024, Geert Uytterhoeven wrote:

> > +               gmac1: ethernet@44000000 {
> > +                       compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
> > +                       reg = <0x44000000 0x2000>;
> > +                       interrupt-parent = <&gic>;
> 
> The surrounding "soc" node already specifies the interrupt parent,
> so there is no need to repeat that. I could fix that while applying
> to renesas-devel for v6.10, but it looks like there will be a v4 for
> the rest of the series anyway?

Indeed there will be a v4 so I'll fix it.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH net-next v3 5/5] ARM: dts: r9a06g032: describe GMAC1

[Romain Gantois]

Hi Geert,

On Thu, 18 Apr 2024, Geert Uytterhoeven wrote:

> > +               gmac1: ethernet@44000000 {
> > +                       compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
> > +                       reg = <0x44000000 0x2000>;
> > +                       interrupt-parent = <&gic>;
> 
> The surrounding "soc" node already specifies the interrupt parent,
> so there is no need to repeat that. I could fix that while applying
> to renesas-devel for v6.10, but it looks like there will be a v4 for
> the rest of the series anyway?

Indeed there will be a v4 so I'll fix it.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

Hi Serge,

On Tue, 16 Apr 2024, Serge Semin wrote:

> > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
> 
> > +			       struct mac_device_info *hw)
> 
> AFAICS hw is unused, and the mac_device_info instance is reached via
> the priv pointer. What about dropping the unused argument then?

Unfortunately, this is an implementation of the pcs_init() callback, which is 
also used by socfpga (see patch 4/6 in this series). The socfpga implementations 
use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

Hi Serge,

On Tue, 16 Apr 2024, Serge Semin wrote:

> > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
> 
> > +			       struct mac_device_info *hw)
> 
> AFAICS hw is unused, and the mac_device_info instance is reached via
> the priv pointer. What about dropping the unused argument then?

Unfortunately, this is an implementation of the pcs_init() callback, which is 
also used by socfpga (see patch 4/6 in this series). The socfpga implementations 
use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Serge Semin]

On Thu, Apr 18, 2024 at 01:57:47PM +0200, Romain Gantois wrote:
> Hi Serge,
> 
> On Tue, 16 Apr 2024, Serge Semin wrote:
> 
> > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
> > 
> > > +			       struct mac_device_info *hw)
> > 
> > AFAICS hw is unused, and the mac_device_info instance is reached via
> > the priv pointer. What about dropping the unused argument then?
> 

> Unfortunately, this is an implementation of the pcs_init() callback, which is 
> also used by socfpga (see patch 4/6 in this series). The socfpga implementations 
> use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it.

I had that patch content in mind when was writing my comment. There is
no point in passing the hw-pointer there either because you already
have the stmmac_priv pointer. There is stmmac_priv::hw field which you
can use instead in the same way as you do in this patch. Here is the
respective change for your SoCFPGA patch:

+static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv,
+				  struct mac_device_info *hw)
+{
...
+
+	priv->hw->phylink_pcs = pcs;
+	return 0;
+}
+
+static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv,
+				   struct mac_device_info *hw)
+{
+	if (priv->hw->phylink_pcs)
+		lynx_pcs_destroy(priv->hw->phylink_pcs);
+}

-Serge(y)

> 
> Thanks,
> 
> -- 
> Romain Gantois, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Serge Semin]

On Thu, Apr 18, 2024 at 01:57:47PM +0200, Romain Gantois wrote:
> Hi Serge,
> 
> On Tue, 16 Apr 2024, Serge Semin wrote:
> 
> > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
> > 
> > > +			       struct mac_device_info *hw)
> > 
> > AFAICS hw is unused, and the mac_device_info instance is reached via
> > the priv pointer. What about dropping the unused argument then?
> 

> Unfortunately, this is an implementation of the pcs_init() callback, which is 
> also used by socfpga (see patch 4/6 in this series). The socfpga implementations 
> use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it.

I had that patch content in mind when was writing my comment. There is
no point in passing the hw-pointer there either because you already
have the stmmac_priv pointer. There is stmmac_priv::hw field which you
can use instead in the same way as you do in this patch. Here is the
respective change for your SoCFPGA patch:

+static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv,
+				  struct mac_device_info *hw)
+{
...
+
+	priv->hw->phylink_pcs = pcs;
+	return 0;
+}
+
+static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv,
+				   struct mac_device_info *hw)
+{
+	if (priv->hw->phylink_pcs)
+		lynx_pcs_destroy(priv->hw->phylink_pcs);
+}

-Serge(y)

> 
> Thanks,
> 
> -- 
> Romain Gantois, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

On Thu, 18 Apr 2024, Serge Semin wrote:

> On Thu, Apr 18, 2024 at 01:57:47PM +0200, Romain Gantois wrote:
> > Hi Serge,
> > 
> > On Tue, 16 Apr 2024, Serge Semin wrote:
> > 
> > > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
> > > 
> > > > +			       struct mac_device_info *hw)
> > > 
> > > AFAICS hw is unused, and the mac_device_info instance is reached via
> > > the priv pointer. What about dropping the unused argument then?
> > 
> 
> > Unfortunately, this is an implementation of the pcs_init() callback, which is 
> > also used by socfpga (see patch 4/6 in this series). The socfpga implementations 
> > use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it.
> 
> I had that patch content in mind when was writing my comment. There is
> no point in passing the hw-pointer there either because you already
> have the stmmac_priv pointer. There is stmmac_priv::hw field which you
> can use instead in the same way as you do in this patch. Here is the
> respective change for your SoCFPGA patch:
> 

You're right, I'll remove the parameter.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH net-next v3 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

On Thu, 18 Apr 2024, Serge Semin wrote:

> On Thu, Apr 18, 2024 at 01:57:47PM +0200, Romain Gantois wrote:
> > Hi Serge,
> > 
> > On Tue, 16 Apr 2024, Serge Semin wrote:
> > 
> > > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
> > > 
> > > > +			       struct mac_device_info *hw)
> > > 
> > > AFAICS hw is unused, and the mac_device_info instance is reached via
> > > the priv pointer. What about dropping the unused argument then?
> > 
> 
> > Unfortunately, this is an implementation of the pcs_init() callback, which is 
> > also used by socfpga (see patch 4/6 in this series). The socfpga implementations 
> > use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it.
> 
> I had that patch content in mind when was writing my comment. There is
> no point in passing the hw-pointer there either because you already
> have the stmmac_priv pointer. There is stmmac_priv::hw field which you
> can use instead in the same way as you do in this patch. Here is the
> respective change for your SoCFPGA patch:
> 

You're right, I'll remove the parameter.

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel