[PATCH AUTOSEL 4.19 1/4] ALSA: line6: Zero-initialize message buffers

[PATCH AUTOSEL 4.19 1/4] ALSA: line6: Zero-initialize message buffers

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c4e51e424e2c772ce1836912a8b0b87cd61bc9d5 ]

For shutting up spurious KMSAN uninit-value warnings, just replace
kmalloc() calls with kzalloc() for the buffers used for
communications.  There should be no real issue with the original code,
but it's still better to cover.

Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com
Message-ID: <20240402063628.26609-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/line6/driver.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index 2399d500b8812..8970d4b3b42c3 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -216,7 +216,7 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 	struct urb *urb;
 
 	/* create message: */
-	msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
+	msg = kzalloc(sizeof(struct message), GFP_ATOMIC);
 	if (msg == NULL)
 		return -ENOMEM;
 
@@ -694,7 +694,7 @@ static int line6_init_cap_control(struct usb_line6 *line6)
 	int ret;
 
 	/* initialize USB buffers: */
-	line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
+	line6->buffer_listen = kzalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
 	if (!line6->buffer_listen)
 		return -ENOMEM;
 
@@ -703,7 +703,7 @@ static int line6_init_cap_control(struct usb_line6 *line6)
 		return -ENOMEM;
 
 	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
-		line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
+		line6->buffer_message = kzalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
 		if (!line6->buffer_message)
 			return -ENOMEM;
 
-- 
2.43.0

[PATCH AUTOSEL 4.19 2/4] net: bcmgenet: Reset RBUF on first open

[Sasha Levin]

From: Phil Elwell <phil@raspberrypi.com>

[ Upstream commit 0a6380cb4c6b5c1d6dad226ba3130f9090f0ccea ]

If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.

Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.

N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.

See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 8bbc5dcf8cb43..9fded8a862d46 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2806,7 +2806,7 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
 }
 
 /* Returns a reusable dma control register value */
-static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
+static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv, bool flush_rx)
 {
 	unsigned int i;
 	u32 reg;
@@ -2831,6 +2831,14 @@ static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
 	udelay(10);
 	bcmgenet_umac_writel(priv, 0, UMAC_TX_FLUSH);
 
+	if (flush_rx) {
+		reg = bcmgenet_rbuf_ctrl_get(priv);
+		bcmgenet_rbuf_ctrl_set(priv, reg | BIT(0));
+		udelay(10);
+		bcmgenet_rbuf_ctrl_set(priv, reg);
+		udelay(10);
+	}
+
 	return dma_ctrl;
 }
 
@@ -2926,8 +2934,8 @@ static int bcmgenet_open(struct net_device *dev)
 
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
-	/* Disable RX/TX DMA and flush TX queues */
-	dma_ctrl = bcmgenet_dma_disable(priv);
+	/* Disable RX/TX DMA and flush TX and RX queues */
+	dma_ctrl = bcmgenet_dma_disable(priv, true);
 
 	/* Reinitialize TDMA and RDMA and SW housekeeping */
 	ret = bcmgenet_init_dma(priv);
@@ -3682,7 +3690,7 @@ static int bcmgenet_resume(struct device *d)
 		bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
 
 	/* Disable RX/TX DMA and flush TX queues */
-	dma_ctrl = bcmgenet_dma_disable(priv);
+	dma_ctrl = bcmgenet_dma_disable(priv, false);
 
 	/* Reinitialize TDMA and RDMA and SW housekeeping */
 	ret = bcmgenet_init_dma(priv);
-- 
2.43.0

[PATCH AUTOSEL 4.19 3/4] ata: sata_gemini: Check clk_enable() result

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit e85006ae7430aef780cc4f0849692e266a102ec0 ]

The call to clk_enable() in gemini_sata_start_bridge() can fail.
Add a check to detect such failure.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/sata_gemini.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_gemini.c b/drivers/ata/sata_gemini.c
index 64b43943f6502..f7b4ed572ce02 100644
--- a/drivers/ata/sata_gemini.c
+++ b/drivers/ata/sata_gemini.c
@@ -200,7 +200,10 @@ int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge)
 		pclk = sg->sata0_pclk;
 	else
 		pclk = sg->sata1_pclk;
-	clk_enable(pclk);
+	ret = clk_enable(pclk);
+	if (ret)
+		return ret;
+
 	msleep(10);
 
 	/* Do not keep clocking a bridge that is not online */
-- 
2.43.0

[PATCH AUTOSEL 4.19 4/4] firewire: ohci: mask bus reset interrupts between ISR and bottom half

[Sasha Levin]

From: Adam Goldman <adamg@pobox.com>

[ Upstream commit 752e3c53de0fa3b7d817a83050b6699b8e9c6ec9 ]

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/ohci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 9807a885e698c..a4912650544fa 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2066,6 +2066,8 @@ static void bus_reset_work(struct work_struct *work)
 
 	ohci->generation = generation;
 	reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
+	if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
+		reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
 
 	if (ohci->quirks & QUIRK_RESET_PACKET)
 		ohci->request_generation = generation;
@@ -2132,12 +2134,14 @@ static irqreturn_t irq_handler(int irq, void *data)
 		return IRQ_NONE;
 
 	/*
-	 * busReset and postedWriteErr must not be cleared yet
+	 * busReset and postedWriteErr events must not be cleared yet
 	 * (OHCI 1.1 clauses 7.2.3.2 and 13.2.8.1)
 	 */
 	reg_write(ohci, OHCI1394_IntEventClear,
 		  event & ~(OHCI1394_busReset | OHCI1394_postedWriteErr));
 	log_irqs(ohci, event);
+	if (event & OHCI1394_busReset)
+		reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset);
 
 	if (event & OHCI1394_selfIDComplete)
 		queue_work(selfid_workqueue, &ohci->bus_reset_work);
-- 
2.43.0