All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	 Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Neil Armstrong <neil.armstrong@linaro.org>,
	 Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v4 0/3] arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock
Date: Mon, 22 Apr 2024 18:16:17 +0200	[thread overview]
Message-ID: <20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v4-0-868b15a17a45@linaro.org> (raw)

The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Document the clock IDs to select the PIPE clock or the AUX clock,
also enforce a second clock-output-names and a #clock-cells value of 1
for the PCIe Gen4x2 PHY found in the SM8[456]50 SoCs.

The PHY driver needs a light refactoring to support a second clock,
and finally the DT is changed to connect the PHY second clock to the
corresponding GCC input then drop the dummy fixed rate clock.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v4:
- Fixed dtbs check error on sm8550-qrd.dtb after rebase on -next
- Link to v3: https://lore.kernel.org/r/20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v3-0-799475a27cce@linaro.org

Changes in v3:
- Rebased on linux-next, applies now cleanly
- Link to v2: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-0-3ec0a966d52f@linaro.org

Changes in v2:
- Collected review tags
- Switched back to of_clk_add_hw_provider/devm_add_action_or_reset to maintain compatibility
- Tried to use generic of_clk_hw_onecell_get() but it requires to much boilerplate code
  and would still need a local qmp_pcie_clk_hw_get() to support the current #clock-cells=0
  when exposing 2 clocks, so it's simpler to just return the clocks in qmp_pcie_clk_hw_get()
- Link to v1: https://lore.kernel.org/r/20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v1-0-926d7a4ccd80@linaro.org

---
Neil Armstrong (3):
      arm64: dts: qcom: sm8450: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
      arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
      arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk

 arch/arm64/boot/dts/qcom/sm8450.dtsi    |  8 ++++----
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 19 -------------------
 arch/arm64/boot/dts/qcom/sm8550.dtsi    | 13 ++++---------
 arch/arm64/boot/dts/qcom/sm8650-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8650.dtsi    | 13 ++++---------
 8 files changed, 12 insertions(+), 57 deletions(-)
---
base-commit: f529a6d274b3b8c75899e949649d231298f30a32
change-id: 20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-4b35169707dd

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>


WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	 Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Neil Armstrong <neil.armstrong@linaro.org>,
	 Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v4 0/3] arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock
Date: Mon, 22 Apr 2024 18:16:17 +0200	[thread overview]
Message-ID: <20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v4-0-868b15a17a45@linaro.org> (raw)

The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Document the clock IDs to select the PIPE clock or the AUX clock,
also enforce a second clock-output-names and a #clock-cells value of 1
for the PCIe Gen4x2 PHY found in the SM8[456]50 SoCs.

The PHY driver needs a light refactoring to support a second clock,
and finally the DT is changed to connect the PHY second clock to the
corresponding GCC input then drop the dummy fixed rate clock.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v4:
- Fixed dtbs check error on sm8550-qrd.dtb after rebase on -next
- Link to v3: https://lore.kernel.org/r/20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v3-0-799475a27cce@linaro.org

Changes in v3:
- Rebased on linux-next, applies now cleanly
- Link to v2: https://lore.kernel.org/r/20240322-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v2-0-3ec0a966d52f@linaro.org

Changes in v2:
- Collected review tags
- Switched back to of_clk_add_hw_provider/devm_add_action_or_reset to maintain compatibility
- Tried to use generic of_clk_hw_onecell_get() but it requires to much boilerplate code
  and would still need a local qmp_pcie_clk_hw_get() to support the current #clock-cells=0
  when exposing 2 clocks, so it's simpler to just return the clocks in qmp_pcie_clk_hw_get()
- Link to v1: https://lore.kernel.org/r/20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v1-0-926d7a4ccd80@linaro.org

---
Neil Armstrong (3):
      arm64: dts: qcom: sm8450: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
      arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk
      arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk

 arch/arm64/boot/dts/qcom/sm8450.dtsi    |  8 ++++----
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 19 -------------------
 arch/arm64/boot/dts/qcom/sm8550.dtsi    | 13 ++++---------
 arch/arm64/boot/dts/qcom/sm8650-mtp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts |  4 ----
 arch/arm64/boot/dts/qcom/sm8650.dtsi    | 13 ++++---------
 8 files changed, 12 insertions(+), 57 deletions(-)
---
base-commit: f529a6d274b3b8c75899e949649d231298f30a32
change-id: 20240319-topic-sm8x50-upstream-pcie-1-phy-aux-clk-4b35169707dd

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

             reply	other threads:[~2024-04-22 16:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-22 16:16 Neil Armstrong [this message]
2024-04-22 16:16 ` [PATCH v4 0/3] arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock Neil Armstrong
2024-04-22 16:16 ` [PATCH v4 1/3] arm64: dts: qcom: sm8450: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk Neil Armstrong
2024-04-22 16:16   ` Neil Armstrong
2024-04-30  2:53   ` Bjorn Andersson
2024-04-30  2:53     ` Bjorn Andersson
2024-04-22 16:16 ` [PATCH v4 2/3] arm64: dts: qcom: sm8550: " Neil Armstrong
2024-04-22 16:16   ` Neil Armstrong
2024-04-22 16:16 ` [PATCH v4 3/3] arm64: dts: qcom: sm8650: " Neil Armstrong
2024-04-22 16:16   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240422-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v4-0-868b15a17a45@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=kishon@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.