All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Arınç ÜNAL via B4 Relay" <devnull+arinc.unal.arinc9.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	 Hauke Mehrtens <hauke@hauke-m.de>,
	Rafal Milecki <zajec5@gmail.com>,
	 Florian Fainelli <florian.fainelli@broadcom.com>,
	 Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>
Cc: "Tom Brautaset" <tbrautaset@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH v3 5/5] ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
Date: Tue, 23 Apr 2024 12:50:49 +0300	[thread overview]
Message-ID: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-5-23d33cfafe7a@arinc9.com> (raw)
In-Reply-To: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-0-23d33cfafe7a@arinc9.com>

From: Arınç ÜNAL <arinc.unal@arinc9.com>

Reorder the nodes and properties to conform to the Devicetree Sources (DTS)
Coding Style.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi | 92 +++++++++++-----------
 .../boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts   | 69 ++++++++--------
 2 files changed, 80 insertions(+), 81 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 9c7efb1c44f1..2cfaaabc7a6a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -10,9 +10,9 @@
 
 / {
 	memory@0 {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
+		device_type = "memory";
 	};
 
 	nvram@1c080000 {
@@ -20,6 +20,34 @@ nvram@1c080000 {
 		reg = <0x1c080000 0x00180000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -66,32 +94,29 @@ led-wps {
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
 		};
 
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
 		};
 
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
 		};
 	};
 };
@@ -141,28 +166,3 @@ &usb2 {
 &usb3_phy {
 	status = "okay";
 };
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
index c78f0c7b137d..a197f447fd97 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -19,13 +19,34 @@ et1macaddr: et1macaddr {
 
 	switch {
 		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
 		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		realtek,disable-leds;
 		dsa,member = <1 0>;
 
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -69,29 +90,21 @@ fixed-link {
 				};
 			};
 		};
+	};
+};
 
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+&gmac0 {
+	status = "disabled";
+};
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
 };
 
 &srab {
@@ -112,17 +125,3 @@ fixed-link {
 		};
 	};
 };
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr 0>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
-	nvmem-cells = <&et1macaddr 1>;
-	nvmem-cell-names = "mac-address";
-};

-- 
2.40.1



WARNING: multiple messages have this Message-ID (diff)
From: "Arınç ÜNAL via B4 Relay" <devnull+arinc.unal.arinc9.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	 Hauke Mehrtens <hauke@hauke-m.de>,
	Rafal Milecki <zajec5@gmail.com>,
	 Florian Fainelli <florian.fainelli@broadcom.com>,
	 Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>
Cc: "Tom Brautaset" <tbrautaset@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH v3 5/5] ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
Date: Tue, 23 Apr 2024 12:50:49 +0300	[thread overview]
Message-ID: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-5-23d33cfafe7a@arinc9.com> (raw)
In-Reply-To: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-0-23d33cfafe7a@arinc9.com>

From: Arınç ÜNAL <arinc.unal@arinc9.com>

Reorder the nodes and properties to conform to the Devicetree Sources (DTS)
Coding Style.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi | 92 +++++++++++-----------
 .../boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts   | 69 ++++++++--------
 2 files changed, 80 insertions(+), 81 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 9c7efb1c44f1..2cfaaabc7a6a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -10,9 +10,9 @@
 
 / {
 	memory@0 {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
+		device_type = "memory";
 	};
 
 	nvram@1c080000 {
@@ -20,6 +20,34 @@ nvram@1c080000 {
 		reg = <0x1c080000 0x00180000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -66,32 +94,29 @@ led-wps {
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
 		};
 
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
 		};
 
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
 		};
 	};
 };
@@ -141,28 +166,3 @@ &usb2 {
 &usb3_phy {
 	status = "okay";
 };
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
index c78f0c7b137d..a197f447fd97 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -19,13 +19,34 @@ et1macaddr: et1macaddr {
 
 	switch {
 		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
 		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		realtek,disable-leds;
 		dsa,member = <1 0>;
 
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -69,29 +90,21 @@ fixed-link {
 				};
 			};
 		};
+	};
+};
 
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+&gmac0 {
+	status = "disabled";
+};
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
 };
 
 &srab {
@@ -112,17 +125,3 @@ fixed-link {
 		};
 	};
 };
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr 0>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
-	nvmem-cells = <&et1macaddr 1>;
-	nvmem-cell-names = "mac-address";
-};

-- 
2.40.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	 Hauke Mehrtens <hauke@hauke-m.de>,
	Rafal Milecki <zajec5@gmail.com>,
	 Florian Fainelli <florian.fainelli@broadcom.com>,
	 Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>
Cc: "Tom Brautaset" <tbrautaset@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH v3 5/5] ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
Date: Tue, 23 Apr 2024 12:50:49 +0300	[thread overview]
Message-ID: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-5-23d33cfafe7a@arinc9.com> (raw)
In-Reply-To: <20240423-for-soc-asus-rt-ac3200-ac5300-v3-0-23d33cfafe7a@arinc9.com>

Reorder the nodes and properties to conform to the Devicetree Sources (DTS)
Coding Style.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi | 92 +++++++++++-----------
 .../boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts   | 69 ++++++++--------
 2 files changed, 80 insertions(+), 81 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 9c7efb1c44f1..2cfaaabc7a6a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -10,9 +10,9 @@
 
 / {
 	memory@0 {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
+		device_type = "memory";
 	};
 
 	nvram@1c080000 {
@@ -20,6 +20,34 @@ nvram@1c080000 {
 		reg = <0x1c080000 0x00180000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -66,32 +94,29 @@ led-wps {
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
 		};
 
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
 		};
 
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
 		};
 	};
 };
@@ -141,28 +166,3 @@ &usb2 {
 &usb3_phy {
 	status = "okay";
 };
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
index c78f0c7b137d..a197f447fd97 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -19,13 +19,34 @@ et1macaddr: et1macaddr {
 
 	switch {
 		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
 		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		realtek,disable-leds;
 		dsa,member = <1 0>;
 
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -69,29 +90,21 @@ fixed-link {
 				};
 			};
 		};
+	};
+};
 
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+&gmac0 {
+	status = "disabled";
+};
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
 };
 
 &srab {
@@ -112,17 +125,3 @@ fixed-link {
 		};
 	};
 };
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr 0>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
-	nvmem-cells = <&et1macaddr 1>;
-	nvmem-cell-names = "mac-address";
-};

-- 
2.40.1


  parent reply	other threads:[~2024-04-23  9:51 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-23  9:50 [PATCH v3 0/5] Document ASUS RT-AC3200 and ASUS RT-AC5300 and add device trees Arınç ÜNAL via B4 Relay
2024-04-23  9:50 ` Arınç ÜNAL via B4 Relay
2024-04-23  9:50 ` Arınç ÜNAL
2024-04-23  9:50 ` [PATCH v3 1/5] dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200 Arınç ÜNAL via B4 Relay
2024-04-23  9:50   ` Arınç ÜNAL
2024-04-23  9:50   ` Arınç ÜNAL via B4 Relay
2024-04-23 11:46   ` Linus Walleij
2024-04-23 11:46     ` Linus Walleij
2024-04-24 17:59   ` Florian Fainelli
2024-04-24 17:59     ` Florian Fainelli
2024-04-23  9:50 ` [PATCH v3 2/5] dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300 Arınç ÜNAL via B4 Relay
2024-04-23  9:50   ` Arınç ÜNAL
2024-04-23  9:50   ` Arınç ÜNAL via B4 Relay
2024-04-23 11:47   ` Linus Walleij
2024-04-23 11:47     ` Linus Walleij
2024-04-24 17:59   ` Florian Fainelli
2024-04-24 17:59     ` Florian Fainelli
2024-04-23  9:50 ` [PATCH v3 3/5] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200 Arınç ÜNAL via B4 Relay
2024-04-23  9:50   ` Arınç ÜNAL
2024-04-23  9:50   ` Arınç ÜNAL via B4 Relay
2024-04-23 11:48   ` Linus Walleij
2024-04-23 11:48     ` Linus Walleij
2024-04-24 17:59   ` Florian Fainelli
2024-04-24 17:59     ` Florian Fainelli
2024-04-23  9:50 ` [PATCH v3 4/5] ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300 Arınç ÜNAL via B4 Relay
2024-04-23  9:50   ` Arınç ÜNAL
2024-04-23  9:50   ` Arınç ÜNAL via B4 Relay
2024-04-23 11:49   ` Linus Walleij
2024-04-23 11:49     ` Linus Walleij
2024-04-24 17:59   ` Florian Fainelli
2024-04-24 17:59     ` Florian Fainelli
2024-04-23  9:50 ` Arınç ÜNAL via B4 Relay [this message]
2024-04-23  9:50   ` [PATCH v3 5/5] ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U Arınç ÜNAL
2024-04-23  9:50   ` Arınç ÜNAL via B4 Relay
2024-04-23 11:50   ` Linus Walleij
2024-04-23 11:50     ` Linus Walleij
2024-04-23 11:51   ` Linus Walleij
2024-04-23 11:51     ` Linus Walleij
2024-04-24 17:59   ` Florian Fainelli
2024-04-24 17:59     ` Florian Fainelli
2024-04-23 14:15 ` [PATCH v3 0/5] Document ASUS RT-AC3200 and ASUS RT-AC5300 and add device trees Rob Herring
2024-04-23 14:15   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240423-for-soc-asus-rt-ac3200-ac5300-v3-5-23d33cfafe7a@arinc9.com \
    --to=devnull+arinc.unal.arinc9.com@kernel.org \
    --cc=arinc.unal@arinc9.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=hauke@hauke-m.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=tbrautaset@gmail.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.