From: Marek Vasut <marex@denx.de> To: netdev@vger.kernel.org Cc: Marek Vasut <marex@denx.de>, "David S. Miller" <davem@davemloft.net>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Christophe Roullier <christophe.roullier@foss.st.com>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Jose Abreu <joabreu@synopsys.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Paolo Abeni <pabeni@redhat.com>, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Subject: [net-next,RFC,PATCH 1/5] net: stmmac: dwmac-stm32: Separate out external clock rate validation Date: Sat, 27 Apr 2024 23:50:40 +0200 [thread overview] Message-ID: <20240427215113.57548-1-marex@denx.de> (raw) Pull the external clock frequency validation into a separate function, to avoid conflating it with external clock DT property decoding and clock mux register configuration. This should make the code easier to read and understand. This does change the code behavior slightly. The clock mux PMCR register setting now depends solely on the DT properties which configure the clock mux between external clock and internal RCC generated clock. The mux PMCR register settings no longer depend on the supplied clock frequency, that supplied clock frequency is now only validated, and if the clock frequency is invalid for a mode, it is rejected. Previously, the code would switch the PMCR register clock mux to internal RCC generated clock if external clock couldn't provide suitable frequency, without checking whether the RCC generated clock frequency is correct. Such behavior is risky at best, user should have configured their clock correctly in the first place, so this behavior is removed here. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Christophe Roullier <christophe.roullier@foss.st.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: netdev@vger.kernel.org --- .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 54 +++++++++++++++---- 1 file changed, 44 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c index c92dfc4ecf570..43340a5573c64 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c @@ -157,25 +157,57 @@ static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat, bool resume) return stm32_dwmac_clk_enable(dwmac, resume); } +static int stm32mp1_validate_ethck_rate(struct plat_stmmacenet_data *plat_dat) +{ + struct stm32_dwmac *dwmac = plat_dat->bsp_priv; + const u32 clk_rate = clk_get_rate(dwmac->clk_eth_ck); + + switch (plat_dat->mac_interface) { + case PHY_INTERFACE_MODE_MII: + if (clk_rate == ETH_CK_F_25M) + return 0; + break; + case PHY_INTERFACE_MODE_GMII: + if (clk_rate == ETH_CK_F_25M) + return 0; + break; + case PHY_INTERFACE_MODE_RMII: + if (clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) + return 0; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + if (clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) + return 0; + break; + default: + break; + } + + dev_err(dwmac->dev, "Mode %s does not match eth-ck frequency %d Hz", + phy_modes(plat_dat->mac_interface), clk_rate); + return -EINVAL; +} + static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) { struct stm32_dwmac *dwmac = plat_dat->bsp_priv; - u32 reg = dwmac->mode_reg, clk_rate; - int val; + u32 reg = dwmac->mode_reg; + int val, ret; - clk_rate = clk_get_rate(dwmac->clk_eth_ck); dwmac->enable_eth_ck = false; switch (plat_dat->mac_interface) { case PHY_INTERFACE_MODE_MII: - if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk) + if (dwmac->ext_phyclk) dwmac->enable_eth_ck = true; val = SYSCFG_PMCR_ETH_SEL_MII; pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n"); break; case PHY_INTERFACE_MODE_GMII: val = SYSCFG_PMCR_ETH_SEL_GMII; - if (clk_rate == ETH_CK_F_25M && - (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) { + if (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk) { dwmac->enable_eth_ck = true; val |= SYSCFG_PMCR_ETH_CLK_SEL; } @@ -183,8 +215,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) break; case PHY_INTERFACE_MODE_RMII: val = SYSCFG_PMCR_ETH_SEL_RMII; - if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) && - (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) { + if (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk) { dwmac->enable_eth_ck = true; val |= SYSCFG_PMCR_ETH_REF_CLK_SEL; } @@ -195,8 +226,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: val = SYSCFG_PMCR_ETH_SEL_RGMII; - if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) && - (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) { + if (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk) { dwmac->enable_eth_ck = true; val |= SYSCFG_PMCR_ETH_CLK_SEL; } @@ -209,6 +239,10 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) return -EINVAL; } + ret = stm32mp1_validate_ethck_rate(plat_dat); + if (ret) + return ret; + /* Need to update PMCCLRR (clear register) */ regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET, dwmac->ops->syscfg_eth_mask); -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Marek Vasut <marex@denx.de> To: netdev@vger.kernel.org Cc: Marek Vasut <marex@denx.de>, "David S. Miller" <davem@davemloft.net>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Christophe Roullier <christophe.roullier@foss.st.com>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Jose Abreu <joabreu@synopsys.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Paolo Abeni <pabeni@redhat.com>, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Subject: [net-next,RFC,PATCH 1/5] net: stmmac: dwmac-stm32: Separate out external clock rate validation Date: Sat, 27 Apr 2024 23:50:40 +0200 [thread overview] Message-ID: <20240427215113.57548-1-marex@denx.de> (raw) Pull the external clock frequency validation into a separate function, to avoid conflating it with external clock DT property decoding and clock mux register configuration. This should make the code easier to read and understand. This does change the code behavior slightly. The clock mux PMCR register setting now depends solely on the DT properties which configure the clock mux between external clock and internal RCC generated clock. The mux PMCR register settings no longer depend on the supplied clock frequency, that supplied clock frequency is now only validated, and if the clock frequency is invalid for a mode, it is rejected. Previously, the code would switch the PMCR register clock mux to internal RCC generated clock if external clock couldn't provide suitable frequency, without checking whether the RCC generated clock frequency is correct. Such behavior is risky at best, user should have configured their clock correctly in the first place, so this behavior is removed here. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Christophe Roullier <christophe.roullier@foss.st.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: netdev@vger.kernel.org --- .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 54 +++++++++++++++---- 1 file changed, 44 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c index c92dfc4ecf570..43340a5573c64 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c @@ -157,25 +157,57 @@ static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat, bool resume) return stm32_dwmac_clk_enable(dwmac, resume); } +static int stm32mp1_validate_ethck_rate(struct plat_stmmacenet_data *plat_dat) +{ + struct stm32_dwmac *dwmac = plat_dat->bsp_priv; + const u32 clk_rate = clk_get_rate(dwmac->clk_eth_ck); + + switch (plat_dat->mac_interface) { + case PHY_INTERFACE_MODE_MII: + if (clk_rate == ETH_CK_F_25M) + return 0; + break; + case PHY_INTERFACE_MODE_GMII: + if (clk_rate == ETH_CK_F_25M) + return 0; + break; + case PHY_INTERFACE_MODE_RMII: + if (clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) + return 0; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + if (clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) + return 0; + break; + default: + break; + } + + dev_err(dwmac->dev, "Mode %s does not match eth-ck frequency %d Hz", + phy_modes(plat_dat->mac_interface), clk_rate); + return -EINVAL; +} + static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) { struct stm32_dwmac *dwmac = plat_dat->bsp_priv; - u32 reg = dwmac->mode_reg, clk_rate; - int val; + u32 reg = dwmac->mode_reg; + int val, ret; - clk_rate = clk_get_rate(dwmac->clk_eth_ck); dwmac->enable_eth_ck = false; switch (plat_dat->mac_interface) { case PHY_INTERFACE_MODE_MII: - if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk) + if (dwmac->ext_phyclk) dwmac->enable_eth_ck = true; val = SYSCFG_PMCR_ETH_SEL_MII; pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n"); break; case PHY_INTERFACE_MODE_GMII: val = SYSCFG_PMCR_ETH_SEL_GMII; - if (clk_rate == ETH_CK_F_25M && - (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) { + if (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk) { dwmac->enable_eth_ck = true; val |= SYSCFG_PMCR_ETH_CLK_SEL; } @@ -183,8 +215,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) break; case PHY_INTERFACE_MODE_RMII: val = SYSCFG_PMCR_ETH_SEL_RMII; - if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) && - (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) { + if (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk) { dwmac->enable_eth_ck = true; val |= SYSCFG_PMCR_ETH_REF_CLK_SEL; } @@ -195,8 +226,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: val = SYSCFG_PMCR_ETH_SEL_RGMII; - if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) && - (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) { + if (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk) { dwmac->enable_eth_ck = true; val |= SYSCFG_PMCR_ETH_CLK_SEL; } @@ -209,6 +239,10 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat) return -EINVAL; } + ret = stm32mp1_validate_ethck_rate(plat_dat); + if (ret) + return ret; + /* Need to update PMCCLRR (clear register) */ regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET, dwmac->ops->syscfg_eth_mask); -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-04-27 21:52 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-27 21:50 Marek Vasut [this message] 2024-04-27 21:50 ` [net-next,RFC,PATCH 1/5] net: stmmac: dwmac-stm32: Separate out external clock rate validation Marek Vasut 2024-04-27 21:50 ` [net-next,RFC,PATCH 2/5] net: stmmac: dwmac-stm32: Separate out external clock selector Marek Vasut 2024-04-27 21:50 ` Marek Vasut 2024-04-27 21:50 ` [net-next,RFC,PATCH 3/5] net: stmmac: dwmac-stm32: Extract PMCR configuration Marek Vasut 2024-04-27 21:50 ` Marek Vasut 2024-04-27 21:50 ` [net-next,RFC,PATCH 4/5] net: stmmac: dwmac-stm32: Clean up the debug prints Marek Vasut 2024-04-27 21:50 ` Marek Vasut 2024-04-27 21:50 ` [net-next,RFC,PATCH 5/5] net: stmmac: dwmac-stm32: Fix Mhz to MHz Marek Vasut 2024-04-27 21:50 ` Marek Vasut 2024-04-29 7:19 ` [net-next,RFC,PATCH 1/5] net: stmmac: dwmac-stm32: Separate out external clock rate validation Sai Krishna Gajula 2024-04-29 7:19 ` Sai Krishna Gajula
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240427215113.57548-1-marex@denx.de \ --to=marex@denx.de \ --cc=alexandre.torgue@foss.st.com \ --cc=christophe.roullier@foss.st.com \ --cc=davem@davemloft.net \ --cc=edumazet@google.com \ --cc=joabreu@synopsys.com \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=pabeni@redhat.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.