[PATCH v3 0/2] Always show mmap prot even though PROT_NONE

[PATCH v3 0/2] Always show mmap prot even though PROT_NONE

[Changbin Du]

Before: PROT_NONE is not shown.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0  -- ls
     0.000 ls/2979231 syscalls:sys_enter_mmap(len: 4220888, flags: PRIVATE|ANONYMOUS)

After: PROT_NONE is displayed.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0  -- ls
     0.000 ls/2975708 syscalls:sys_enter_mmap(len: 4220888, prot: NONE, flags: PRIVATE|ANONYMOUS)

Changbin Du (2):
  perf trace beauty: Always show param if show_zero is set
  perf trace beauty: Always show mmap prot even though PROT_NONE

 tools/perf/builtin-trace.c | 35 ++++++++++-------------------------
 1 file changed, 10 insertions(+), 25 deletions(-)

-- 
2.34.1

[PATCH v3 1/2] perf trace beauty: Always show param if show_zero is set

[Changbin Du]

For some parameters, it is best to also display them when they are 0,
e.g. flags.

Here we only check the show_zero property and let arg printer handle
special cases.

Signed-off-by: Changbin Du <changbin.du@huawei.com>
---
 tools/perf/builtin-trace.c | 29 +++++++----------------------
 1 file changed, 7 insertions(+), 22 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index e5fef39c34bf..915dcd258002 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -2091,17 +2091,11 @@ static size_t syscall__scnprintf_args(struct syscall *sc, char *bf, size_t size,
 			val = syscall_arg_fmt__mask_val(&sc->arg_fmt[arg.idx], &arg, val);
 
 			/*
- 			 * Suppress this argument if its value is zero and
- 			 * and we don't have a string associated in an
- 			 * strarray for it.
- 			 */
-			if (val == 0 &&
-			    !trace->show_zeros &&
-			    !(sc->arg_fmt &&
-			      (sc->arg_fmt[arg.idx].show_zero ||
-			       sc->arg_fmt[arg.idx].scnprintf == SCA_STRARRAY ||
-			       sc->arg_fmt[arg.idx].scnprintf == SCA_STRARRAYS) &&
-			      sc->arg_fmt[arg.idx].parm))
+			 * Suppress this argument if its value is zero and show_zero
+			 * property isn't set.
+			 */
+			if (val == 0 && !trace->show_zeros &&
+			    !(sc->arg_fmt && sc->arg_fmt[arg.idx].show_zero))
 				continue;
 
 			printed += scnprintf(bf + printed, size - printed, "%s", printed ? ", " : "");
@@ -2796,17 +2790,8 @@ static size_t trace__fprintf_tp_fields(struct trace *trace, struct evsel *evsel,
 		 */
 		val = syscall_arg_fmt__mask_val(arg, &syscall_arg, val);
 
-		/*
-		 * Suppress this argument if its value is zero and
-		 * we don't have a string associated in an
-		 * strarray for it.
-		 */
-		if (val == 0 &&
-		    !trace->show_zeros &&
-		    !((arg->show_zero ||
-		       arg->scnprintf == SCA_STRARRAY ||
-		       arg->scnprintf == SCA_STRARRAYS) &&
-		      arg->parm))
+		/* Suppress this argument if its value is zero and show_zero property isn't set. */
+		if (val == 0 && !trace->show_zeros && !arg->show_zero)
 			continue;
 
 		printed += scnprintf(bf + printed, size - printed, "%s", printed ? ", " : "");
-- 
2.34.1

[PATCH v3 2/2] perf trace beauty: Always show mmap prot even though PROT_NONE

[Changbin Du]

PROT_NONE is also useful information, so do not omit the mmap prot even
though it is 0. syscall_arg__scnprintf_mmap_prot() could print PROT_NONE
for prot 0.

Before: PROT_NONE is not shown.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0  -- ls
     0.000 ls/2979231 syscalls:sys_enter_mmap(len: 4220888, flags: PRIVATE|ANONYMOUS)

After: PROT_NONE is displayed.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0  -- ls
     0.000 ls/2975708 syscalls:sys_enter_mmap(len: 4220888, prot: NONE, flags: PRIVATE|ANONYMOUS)

Signed-off-by: Changbin Du <changbin.du@huawei.com>
---
 tools/perf/builtin-trace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 915dcd258002..919a462a7cb5 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -1033,7 +1033,7 @@ static const struct syscall_fmt syscall_fmts[] = {
 #if defined(__s390x__)
 	.alias = "old_mmap",
 #endif
-	  .arg = { [2] = { .scnprintf = SCA_MMAP_PROT,	/* prot */ },
+	  .arg = { [2] = { .scnprintf = SCA_MMAP_PROT, .show_zero = true, /* prot */ },
 		   [3] = { .scnprintf = SCA_MMAP_FLAGS,	/* flags */
 			   .strtoul   = STUL_STRARRAY_FLAGS,
 			   .parm      = &strarray__mmap_flags, },
@@ -1050,7 +1050,7 @@ static const struct syscall_fmt syscall_fmts[] = {
 		   [4] = { .scnprintf = SCA_MOVE_MOUNT_FLAGS, /* flags */ }, }, },
 	{ .name	    = "mprotect",
 	  .arg = { [0] = { .scnprintf = SCA_HEX,	/* start */ },
-		   [2] = { .scnprintf = SCA_MMAP_PROT,	/* prot */ }, }, },
+		   [2] = { .scnprintf = SCA_MMAP_PROT, .show_zero = true, /* prot */ }, }, },
 	{ .name	    = "mq_unlink",
 	  .arg = { [0] = { .scnprintf = SCA_FILENAME, /* u_name */ }, }, },
 	{ .name	    = "mremap",	    .hexret = true,
@@ -1084,7 +1084,7 @@ static const struct syscall_fmt syscall_fmts[] = {
 	  .arg = { [0] = { .scnprintf = SCA_INT,	/* key */ }, }, },
 	{ .name	    = "pkey_mprotect",
 	  .arg = { [0] = { .scnprintf = SCA_HEX,	/* start */ },
-		   [2] = { .scnprintf = SCA_MMAP_PROT,	/* prot */ },
+		   [2] = { .scnprintf = SCA_MMAP_PROT, .show_zero = true, /* prot */ },
 		   [3] = { .scnprintf = SCA_INT,	/* pkey */ }, }, },
 	{ .name	    = "poll", .timeout = true, },
 	{ .name	    = "ppoll", .timeout = true, },
-- 
2.34.1