[PATCH 18/22] ath9k: BT coex performance tuning for AR9462

[PATCH 18/22] ath9k: BT coex performance tuning for AR9462

[Sujith Manoharan]

Use smaller aggregation limit and increasing aggregation threshold
for osla that could improve wlan performance when there is HID profile.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_mci.c |    3 --
 drivers/net/wireless/ath/ath9k/ar9003_mci.h |    1 -
 drivers/net/wireless/ath/ath9k/mci.c        |   54 +++++++++++++++++----------
 3 files changed, 35 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 8b09a82..b1ced2a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1381,9 +1381,6 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
 	case MCI_STATE_NEED_FTP_STOMP:
 		value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP);
 		break;
-	case MCI_STATE_NEED_TUNING:
-		value = !(mci->config & ATH_MCI_CONFIG_DISABLE_TUNING);
-		break;
 	default:
 		break;
 	}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index f4a6a44..10282e2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -212,7 +212,6 @@ enum mci_state_type {
 	MCI_STATE_SET_CONCUR_TX_PRI,
 	MCI_STATE_RECOVER_RX,
 	MCI_STATE_NEED_FTP_STOMP,
-	MCI_STATE_NEED_TUNING,
 	MCI_STATE_DEBUG,
 	MCI_STATE_MAX
 };
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 7b553f6..49137f4 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -116,42 +116,58 @@ static void ath_mci_update_scheme(struct ath_softc *sc)
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_btcoex *btcoex = &sc->btcoex;
 	struct ath_mci_profile *mci = &btcoex->mci;
+	struct ath9k_hw_mci *mci_hw = &sc->sc_ah->btcoex_hw.mci;
 	struct ath_mci_profile_info *info;
 	u32 num_profile = NUM_PROF(mci);
 
+	if (mci_hw->config & ATH_MCI_CONFIG_DISABLE_TUNING)
+		goto skip_tuning;
+
 	if (num_profile == 1) {
 		info = list_first_entry(&mci->info,
 					struct ath_mci_profile_info,
 					list);
-		if (mci->num_sco && info->T == 12) {
-			mci->aggr_limit = 8;
+		if (mci->num_sco) {
+			if (info->T == 12)
+				mci->aggr_limit = 8;
+			else if (info->T == 6) {
+				mci->aggr_limit = 6;
+				btcoex->duty_cycle = 30;
+			}
 			ath_dbg(common, MCI,
-				"Single SCO, aggregation limit 2 ms\n");
-		} else if ((info->type == MCI_GPM_COEX_PROFILE_BNEP) &&
-			   !info->master) {
-			btcoex->btcoex_period = 60;
+				"Single SCO, aggregation limit %d 1/4 ms\n",
+				mci->aggr_limit);
+		} else if (mci->num_pan || mci->num_other_acl) {
+			/*
+			 * For single PAN/FTP profile, allocate 35% for BT
+			 * to improve WLAN throughput.
+			 */
+			btcoex->duty_cycle = 35;
+			btcoex->btcoex_period = 53;
 			ath_dbg(common, MCI,
-				"Single slave PAN/FTP, bt period 60 ms\n");
-		} else if ((info->type == MCI_GPM_COEX_PROFILE_HID) &&
-			 (info->T > 0 && info->T < 50) &&
-			 (info->A > 1 || info->W > 1)) {
+				"Single PAN/FTP bt period %d ms dutycycle %d\n",
+				btcoex->duty_cycle, btcoex->btcoex_period);
+		} else if (mci->num_hid) {
 			btcoex->duty_cycle = 30;
-			mci->aggr_limit = 8;
+			mci->aggr_limit = 6;
 			ath_dbg(common, MCI,
 				"Multiple attempt/timeout single HID "
-				"aggregation limit 2 ms dutycycle 30%%\n");
+				"aggregation limit 1.5 ms dutycycle 30%%\n");
 		}
-	} else if ((num_profile == 2) && (mci->num_hid == 2)) {
-		btcoex->duty_cycle = 30;
-		mci->aggr_limit = 8;
-		ath_dbg(common, MCI,
-			"Two HIDs aggregation limit 2 ms dutycycle 30%%\n");
-	} else if (num_profile > 3) {
+	} else if (num_profile == 2) {
+		if (mci->num_hid == 2)
+			btcoex->duty_cycle = 30;
 		mci->aggr_limit = 6;
 		ath_dbg(common, MCI,
-			"Three or more profiles aggregation limit 1.5 ms\n");
+			"Two BT profiles aggr limit 1.5 ms dutycycle %d%%\n",
+			btcoex->duty_cycle);
+	} else if (num_profile >= 3) {
+		mci->aggr_limit = 4;
+		ath_dbg(common, MCI,
+			"Three or more profiles aggregation limit 1 ms\n");
 	}
 
+skip_tuning:
 	if (IS_CHAN_2GHZ(sc->sc_ah->curchan)) {
 		if (IS_CHAN_HT(sc->sc_ah->curchan))
 			ath_mci_adjust_aggr_limit(btcoex);
-- 
1.7.10.2