All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: tomi.valkeinen@ti.com, dri-devel@lists.freedesktop.org
Subject: Re: [RFC 2/7] drm/omap: Allocate drm_device earlier and unref it as last step
Date: Fri, 01 Sep 2017 14:12:32 +0300	[thread overview]
Message-ID: <2090248.InI4i6EBot@avalon> (raw)
In-Reply-To: <20170829073218.11097-3-peter.ujfalusi@ti.com>

Hi Peter,

Thank you for the patch.

On Tuesday, 29 August 2017 10:32:13 EEST Peter Ujfalusi wrote:
> If we allocate the drm_device earlier we can just return the error code
> without the need to use goto.
> Do the unref of the drm_device as a last step when cleaning up. This will
> make the drm_device available longer for us and makes sure that we only
> free up the memory when all other cleanups have been already done.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Pending a new version due to patch 1/7 not being correct,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/omap_drv.c | 29 +++++++++++++----------------
>  1 file changed, 13 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index 903510d8054e..bd7fe317a365
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -552,6 +552,14 @@ static int pdev_probe(struct platform_device *pdev)
>  	if (!priv)
>  		return -ENOMEM;
> 
> +	/* Allocate and initialize the DRM device. */
> +	ddev = drm_dev_alloc(&omap_drm_driver, &pdev->dev);
> +	if (IS_ERR(ddev))
> +		return PTR_ERR(ddev);
> +
> +	ddev->dev_private = priv;
> +	platform_set_drvdata(pdev, ddev);
> +
>  	omap_crtc_pre_init();
> 
>  	ret = omap_connect_dssdevs();
> @@ -568,22 +576,12 @@ static int pdev_probe(struct platform_device *pdev)
>  	spin_lock_init(&priv->list_lock);
>  	INIT_LIST_HEAD(&priv->obj_list);
> 
> -	/* Allocate and initialize the DRM device. */
> -	ddev = drm_dev_alloc(&omap_drm_driver, &pdev->dev);
> -	if (IS_ERR(ddev)) {
> -		ret = PTR_ERR(ddev);
> -		goto err_destroy_wq;
> -	}
> -
> -	ddev->dev_private = priv;
> -	platform_set_drvdata(pdev, ddev);
> -
>  	omap_gem_init(ddev);
> 
>  	ret = omap_modeset_init(ddev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "omap_modeset_init failed: ret=%d\n", ret);
> -		goto err_free_drm_dev;
> +		goto err_gem_deinit;
>  	}
> 
>  	/* Initialize vblank handling, start with all CRTCs disabled. */
> @@ -619,14 +617,13 @@ static int pdev_probe(struct platform_device *pdev)
>  err_cleanup_modeset:
>  	drm_mode_config_cleanup(ddev);
>  	omap_drm_irq_uninstall(ddev);
> -err_free_drm_dev:
> +err_gem_deinit:
>  	omap_gem_deinit(ddev);
> -	drm_dev_unref(ddev);
> -err_destroy_wq:
>  	destroy_workqueue(priv->wq);
>  	omap_disconnect_dssdevs();
>  err_crtc_uninit:
>  	omap_crtc_pre_uninit();
> +	drm_dev_unref(ddev);
>  	return ret;
>  }
> 
> @@ -652,13 +649,13 @@ static int pdev_remove(struct platform_device *pdev)
>  	omap_drm_irq_uninstall(ddev);
>  	omap_gem_deinit(ddev);
> 
> -	drm_dev_unref(ddev);
> -
>  	destroy_workqueue(priv->wq);
> 
>  	omap_disconnect_dssdevs();
>  	omap_crtc_pre_uninit();
> 
> +	drm_dev_unref(ddev);
> +
>  	return 0;
>  }


-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-09-01 13:13 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-29  7:32 [RFC 0/7] drm/omap: Module parameter for display order configuration Peter Ujfalusi
2017-08-29  7:32 ` [RFC 1/7] drm/omap: Use devm_kzalloc() to allocate omap_drm_private Peter Ujfalusi
2017-09-01 11:10   ` Laurent Pinchart
2017-09-04  9:13     ` Peter Ujfalusi
2017-09-04  9:41       ` Laurent Pinchart
2017-09-04 11:16         ` Peter Ujfalusi
2017-09-04 14:19           ` Laurent Pinchart
2017-09-05  6:35             ` Peter Ujfalusi
2017-08-29  7:32 ` [RFC 2/7] drm/omap: Allocate drm_device earlier and unref it as last step Peter Ujfalusi
2017-09-01 11:12   ` Laurent Pinchart [this message]
2017-08-29  7:32 ` [RFC 3/7] drm/omap: Manage the usable omap_dss_device list within omap_drm_private Peter Ujfalusi
2017-09-01 11:27   ` Laurent Pinchart
2017-09-04  9:19     ` Peter Ujfalusi
2017-09-04  9:45       ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 4/7] drm/omap: Separate the dssdevs array setup from the connect function Peter Ujfalusi
2017-08-29  7:32 ` [RFC 5/7] drm/omap: Do dss_device (display) ordering in omap_drv.c Peter Ujfalusi
2017-09-01 11:32   ` Laurent Pinchart
2017-09-04  9:26     ` Peter Ujfalusi
2017-09-04  9:46       ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 6/7] drm/omap: dss: Remove display ordering from dss/display.c Peter Ujfalusi
2017-08-29  7:32 ` [RFC 7/7] drm/omap: Add kernel parameter to specify the desired display order Peter Ujfalusi
2017-09-01 11:36 ` [RFC 0/7] drm/omap: Module parameter for display order configuration Laurent Pinchart
2017-09-04 10:03   ` Peter Ujfalusi
2018-05-25 20:09     ` Laurent Pinchart
2017-10-05  9:56 ` Pekka Paalanen
2017-10-05 10:01   ` Tomi Valkeinen
2017-10-05 10:43     ` Pekka Paalanen
2017-10-05 11:24       ` Tomi Valkeinen
2017-10-05 11:54         ` Pekka Paalanen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2090248.InI4i6EBot@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.