* [PATCHv3 0/7] Initial Freescale i.MX51 SoC support
@ 2010-02-05 16:26 Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family Amit Kucheria
0 siblings, 1 reply; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
(Using Magnus Damm's template for introducing a new arch)
This series of patches adds basic support for i.MX5 family to the kernel. This
is just the bare minimum that brings up the board - sets up the clocks, IO
with a serial port and timers.
Features:
* Console: Serial console using pre-existing drivers/serial/imx.c
* Timer: Timer provided through arch/arm/plat-mxc/time.c
* Interrupts: New interrupt controller through arch/arm/plat-mxc/tzic.c
* Clocks: Minimal Clock framework to allow board boot up
* Defconfigs: mx51_defconfig provided
Tested on a i.MX51-based Babbage 2.5 board.
Git:
repo: git://kernel.ubuntu.com/amitk/mx51-upstream.git mx51-baseport
gitweb:
http://kernel.ubuntu.com/git?p=amitk/mx51-upstream.git;a=shortlog;h=refs/heads/mx51-baseport
Story:
This is a result of dropping a lot of functionality from the existing
Freescale codebase that is shipping as part of the Ubuntu ARM enablement. A
lot of the code was refactored to use facilities that were already available
upstream in arch/arm/plat-mxc/. The hope is to get this base port into
mainline and then start working on mainlining the drivers.
Changelog:
V1: Initial submission of base port
V2: - Split core code enabling i.MX51 and the babbage board
- Refactor timer code to use version 1 or 2 of timer (patch by Sascha)
- Fixes from review of V1
V3: - Fixes from review of V2
- Merge the Driver Strength patch into the Core i.MX5 support
- Moved the fec patches out of this series into its own
- Merge the Kconfig/Makefiles into Babbage board support
Regards,
Amit
Amit Kucheria (6):
mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family
mxc: changes to common plat-mxc code to add support for i.MX5
mxc: Core support for Freescale i.MX5 series
mxc: Add support for the Babbage board (i.MX5)
mxc: Add mx51_defconfig
mxc: MAINTAINERS: Add maintainer for mach-mx5
Sascha Hauer (1):
mxc: refactor timer code to use timer versions
MAINTAINERS | 6 +
arch/arm/Makefile | 1 +
arch/arm/configs/mx51_defconfig | 1286 ++++++++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 17 +
arch/arm/mach-mx5/Makefile | 9 +
arch/arm/mach-mx5/Makefile.boot | 3 +
arch/arm/mach-mx5/board-mx51_babbage.c | 98 ++
arch/arm/mach-mx5/clock-mx51.c | 825 +++++++++++++++++
arch/arm/mach-mx5/cpu.c | 47 +
arch/arm/mach-mx5/crm_regs.h | 583 ++++++++++++
arch/arm/mach-mx5/devices.c | 96 ++
arch/arm/mach-mx5/devices.h | 4 +
arch/arm/mach-mx5/mm.c | 89 ++
arch/arm/plat-mxc/Kconfig | 16 +
arch/arm/plat-mxc/Makefile | 3 +
arch/arm/plat-mxc/include/mach/common.h | 5 +
arch/arm/plat-mxc/include/mach/debug-macro.S | 9 +
arch/arm/plat-mxc/include/mach/entry-macro.S | 34 +-
arch/arm/plat-mxc/include/mach/hardware.h | 4 +
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 326 +++++++
arch/arm/plat-mxc/include/mach/iomux-v3.h | 8 +-
arch/arm/plat-mxc/include/mach/irqs.h | 9 +-
arch/arm/plat-mxc/include/mach/memory.h | 3 +
arch/arm/plat-mxc/include/mach/mx51.h | 454 +++++++++
arch/arm/plat-mxc/include/mach/mxc.h | 13 +
arch/arm/plat-mxc/include/mach/timex.h | 2 +
arch/arm/plat-mxc/time.c | 41 +-
arch/arm/plat-mxc/tzic.c | 172 ++++
28 files changed, 4143 insertions(+), 20 deletions(-)
create mode 100644 arch/arm/configs/mx51_defconfig
create mode 100644 arch/arm/mach-mx5/Kconfig
create mode 100644 arch/arm/mach-mx5/Makefile
create mode 100644 arch/arm/mach-mx5/Makefile.boot
create mode 100644 arch/arm/mach-mx5/board-mx51_babbage.c
create mode 100644 arch/arm/mach-mx5/clock-mx51.c
create mode 100644 arch/arm/mach-mx5/cpu.c
create mode 100644 arch/arm/mach-mx5/crm_regs.h
create mode 100644 arch/arm/mach-mx5/devices.c
create mode 100644 arch/arm/mach-mx5/devices.h
create mode 100644 arch/arm/mach-mx5/mm.c
create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx51.h
create mode 100644 arch/arm/plat-mxc/include/mach/mx51.h
create mode 100644 arch/arm/plat-mxc/tzic.c
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family
2010-02-05 16:26 [PATCHv3 0/7] Initial Freescale i.MX51 SoC support Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 2/7] mxc: refactor timer code to use timer versions Amit Kucheria
0 siblings, 1 reply; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
Freescale i.MX51 processor uses a new interrupt controller. Add
driver for TrustZone Interrupt Controller
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/plat-mxc/Kconfig | 8 ++
arch/arm/plat-mxc/Makefile | 3 +
arch/arm/plat-mxc/include/mach/common.h | 1 +
arch/arm/plat-mxc/include/mach/entry-macro.S | 34 +++++-
arch/arm/plat-mxc/include/mach/irqs.h | 6 +-
arch/arm/plat-mxc/tzic.c | 172 ++++++++++++++++++++++++++
6 files changed, 222 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/plat-mxc/tzic.c
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8b0a1ee..59558c4 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -62,6 +62,14 @@ config MXC_IRQ_PRIOR
requirements for timing.
Say N here, unless you have a specialized requirement.
+config MXC_TZIC
+ bool "Enable TrustZone Interrupt Controller"
+ depends on ARCH_MX51
+ help
+ This will be automatically selected for all processors
+ containing this interrupt controller.
+ Say N here only if you are really sure.
+
config MXC_PWM
tristate "Enable PWM driver"
depends on ARCH_MXC
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 996cbac..0202ad9 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,6 +5,9 @@
# Common support
obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b..49f1a4a 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -22,6 +22,7 @@ extern void mx31_map_io(void);
extern void mx35_map_io(void);
extern void mxc91231_map_io(void);
extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
extern void mx21_init_irq(void);
extern void mx25_init_irq(void);
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 7cf290e..aeb0869 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
@@ -18,11 +18,16 @@
.endm
.macro get_irqnr_preamble, base, tmp
+#ifndef CONFIG_MXC_TZIC
ldr \base, =avic_base
ldr \base, [\base]
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
+#elif defined CONFIG_MXC_TZIC
+ ldr \base, =tzic_base
+ ldr \base, [\base]
+#endif /* CONFIG_MXC_TZIC */
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -32,6 +37,7 @@
@ and returns its number in irqnr
@ and returns if an interrupt occured in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifndef CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending from AVIC_NIVECSR
ldr \irqstat, [\base, #0x40]
@@ -45,6 +51,32 @@
strne \tmp, [\base, #AVIC_NIMASK]
streq r4, [\base, #AVIC_NIMASK]
#endif
+#elif defined CONFIG_MXC_TZIC
+ @ Load offset & priority of the highest priority
+ @ interrupt pending.
+ @ 0xD80 is HIPND0 register
+ mov \irqnr, #0
+ mov \irqstat, #0x0D80
+1000:
+ ldr \tmp, [\irqstat, \base]
+ cmp \tmp, #0
+ bne 1001f
+ addeq \irqnr, \irqnr, #32
+ addeq \irqstat, \irqstat, #4
+ cmp \irqnr, #128
+ blo 1000b
+ b 2001f
+1001: mov \irqstat, #1
+1002: tst \tmp, \irqstat
+ bne 2002f
+ movs \tmp, \tmp, lsr #1
+ addne \irqnr, \irqnr, #1
+ bne 1002b
+2001:
+ mov \irqnr, #0
+2002:
+ movs \irqnr, \irqnr
+#endif
.endm
@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..4c51083 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,9 +12,13 @@
#define __ASM_ARCH_MXC_IRQS_H__
/*
- * So far all i.MX SoCs have 64 internal interrupts
+ * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
*/
+#ifdef CONFIG_MXC_TZIC
+#define MXC_INTERNAL_IRQS 128
+#else
#define MXC_INTERNAL_IRQS 64
+#endif
#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
new file mode 100644
index 0000000..afa6709
--- /dev/null
+++ b/arch/arm/plat-mxc/tzic.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+
+/*
+ *****************************************
+ * TZIC Registers *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL 0x0000 /* Control register */
+#define TZIC_INTTYPE 0x0004 /* Controller Type register */
+#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
+#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
+#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
+#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
+#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
+#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
+#define TZIC_PND0 0x0D00 /* Pending Register 0 */
+#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */
+#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
+#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
+#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+
+/**
+ * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
+ *
+ * @param irq interrupt source number
+ */
+static void tzic_mask_irq(unsigned int irq)
+{
+ int index, off;
+
+ index = irq >> 5;
+ off = irq & 0x1F;
+ __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
+}
+
+/**
+ * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
+ *
+ * @param irq interrupt source number
+ */
+static void tzic_unmask_irq(unsigned int irq)
+{
+ int index, off;
+
+ index = irq >> 5;
+ off = irq & 0x1F;
+ __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
+}
+
+static unsigned int wakeup_intr[4];
+
+/**
+ * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
+ *
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * disble as wake-up if equal to zero
+ *
+ * @return This function returns 0 on success.
+ */
+static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
+{
+ unsigned int index, off;
+
+ index = irq >> 5;
+ off = irq & 0x1F;
+
+ if (index > 3)
+ return -EINVAL;
+
+ if (enable)
+ wakeup_intr[index] |= (1 << off);
+ else
+ wakeup_intr[index] &= ~(1 << off);
+
+ return 0;
+}
+
+static struct irq_chip mxc_tzic_chip = {
+ .name = "MXC_TZIC",
+ .ack = tzic_mask_irq,
+ .mask = tzic_mask_irq,
+ .unmask = tzic_unmask_irq,
+ .set_wake = tzic_set_wake_irq,
+};
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+ int i;
+
+ tzic_base = irqbase;
+ /* put the TZIC into the reset value with
+ * all interrupts disabled
+ */
+ i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+ __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+ __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+ __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+ /* disable all interrupts */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+ /* all IRQ no FIQ Warning :: No selection */
+
+ for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+ set_irq_chip(i, &mxc_tzic_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @param is_idle 1 if called in idle loop (ENSET0 register);
+ * 0 to be used when called from low power entry
+ * @return 0 if successful; non-zero otherwise
+ */
+int tzic_enable_wake(int is_idle)
+{
+ unsigned int i, v;
+
+ __raw_writel(1, tzic_base + TZIC_DSMINT);
+ if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+ return -EAGAIN;
+
+ for (i = 0; i < 4; i++) {
+ v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
+ __raw_writel(v, TZIC_WAKEUP0(i));
+ }
+
+ return 0;
+}
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 2/7] mxc: refactor timer code to use timer versions
2010-02-05 16:26 ` [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5 Amit Kucheria
0 siblings, 1 reply; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
From: Sascha Hauer <s.hauer@pengutronix.de>
Refactor the timer code into version 1 and version 2.
Essentially there are 2 versions of the timer hardware on Freescale MXC
hardware. Version 1 is found on MX1/MXL, MX21 and MX27. Version 2 is found on
MX25, MX31, MX35, MX37, MX51, and future parts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/plat-mxc/time.c | 41 ++++++++++++++++++++++++++---------------
1 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 844567e..c1ce51a 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -30,9 +30,15 @@
#include <asm/mach/time.h>
#include <mach/common.h>
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
/* defines common for all i.MX */
#define MXC_TCTL 0x00
-#define MXC_TCTL_TEN (1 << 0)
+#define MXC_TCTL_TEN (1 << 0) /* Enable module */
#define MXC_TPRER 0x04
/* MX1, MX21, MX27 */
@@ -47,8 +53,8 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35, MX25, MXC91231 */
-#define MX3_TCTL_WAITEN (1 << 3)
+/* MX31, MX35, MX25, MXC91231, MX5 */
+#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define MX3_TCTL_CLK_IPG (1 << 6)
#define MX3_TCTL_FRR (1 << 9)
#define MX3_IR 0x0c
@@ -57,6 +63,9 @@
#define MX3_TCN 0x24
#define MX3_TCMP 0x10
+#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2() (!timer_is_v1())
+
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
@@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void)
{
unsigned int tmp;
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
__raw_writel(0, timer_base + MX3_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void)
static inline void gpt_irq_enable(void)
{
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
__raw_writel(1<<0, timer_base + MX3_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void)
static void gpt_irq_acknowledge(void)
{
- if (cpu_is_mx1())
- __raw_writel(0, timer_base + MX1_2_TSTAT);
- if (cpu_is_mx2())
- __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v1()) {
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ else
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+ timer_base + MX1_2_TSTAT);
+ } else if (timer_is_v2())
__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
}
@@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
clocksource_mxc.read = mx3_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
timer_base + MX3_TCMP);
else
@@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
tstat = __raw_readl(timer_base + MX3_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
clockevent_mxc.set_next_event = mx3_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
__raw_writel(0, timer_base + MXC_TCTL);
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5
2010-02-05 16:26 ` [PATCHv3 2/7] mxc: refactor timer code to use timer versions Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series Amit Kucheria
0 siblings, 1 reply; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
Prepare for i.MX5 SoC code by adding the relevant macros to common plat-mxc
code.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/plat-mxc/include/mach/debug-macro.S | 9 +++++++++
arch/arm/plat-mxc/include/mach/hardware.h | 4 ++++
arch/arm/plat-mxc/include/mach/irqs.h | 3 +++
arch/arm/plat-mxc/include/mach/memory.h | 3 +++
arch/arm/plat-mxc/include/mach/mxc.h | 13 +++++++++++++
arch/arm/plat-mxc/include/mach/timex.h | 2 ++
6 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b14..9d41bfd 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,15 @@
#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR MX51_UART1_BASE_ADDR
+#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
#ifdef CONFIG_ARCH_MXC91231
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 78db754..55ebe88 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,6 +22,10 @@
#include <asm/sizes.h>
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
#ifdef CONFIG_ARCH_MX3
#include <mach/mx3x.h>
#include <mach/mx31.h>
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 4c51083..24c066e 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -30,6 +30,8 @@
#define MXC_GPIO_IRQS (32 * 3)
#elif defined CONFIG_ARCH_MX25
#define MXC_GPIO_IRQS (32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MXC91231
#define MXC_GPIO_IRQS (32 * 4)
#endif
@@ -50,6 +52,7 @@
#else
#define MX3_IPU_IRQS 0
#endif
+/* REVISIT: Add IPU irqs on IMX51 */
#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d3afafd..e46626e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -27,6 +27,9 @@
#elif defined CONFIG_ARCH_MXC91231
#define PHYS_OFFSET UL(0x90000000)
#endif
+#ifdef CONFIG_ARCH_MX5
+#define PHYS_OFFSET UL(0x90000000)
+#endif
#if defined(CONFIG_MX1_VIDEO)
/*
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5199053..555e5f8 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
+#define MXC_CPU_MX51 51
#define MXC_CPU_MXC91231 91231
#ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx35() (0)
#endif
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51() (0)
+#endif
+
#ifdef CONFIG_ARCH_MXC91231
# ifdef mxc_cpu_type
# undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 527a6c2..024416e 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
#define CLOCK_TICK_RATE 16625000
#elif defined CONFIG_ARCH_MX25
#define CLOCK_TICK_RATE 16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE 8000000
#elif defined CONFIG_ARCH_MXC91231
#define CLOCK_TICK_RATE 13000000
#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series
2010-02-05 16:26 ` [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5 Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
0 siblings, 1 reply; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
Add basic clock support, cpu identification, I/O mapping, interrupt
controller, serial port and ethernet.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/mach-mx5/clock-mx51.c | 825 +++++++++++++++++++++++++++
arch/arm/mach-mx5/cpu.c | 47 ++
arch/arm/mach-mx5/crm_regs.h | 583 +++++++++++++++++++
arch/arm/mach-mx5/devices.c | 96 +++
arch/arm/mach-mx5/devices.h | 4 +
arch/arm/mach-mx5/mm.c | 89 +++
arch/arm/plat-mxc/include/mach/common.h | 4 +
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 326 +++++++++++
arch/arm/plat-mxc/include/mach/iomux-v3.h | 8 +-
arch/arm/plat-mxc/include/mach/mx51.h | 454 +++++++++++++++
10 files changed, 2433 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-mx5/clock-mx51.c
create mode 100644 arch/arm/mach-mx5/cpu.c
create mode 100644 arch/arm/mach-mx5/crm_regs.h
create mode 100644 arch/arm/mach-mx5/devices.c
create mode 100644 arch/arm/mach-mx5/devices.h
create mode 100644 arch/arm/mach-mx5/mm.c
create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx51.h
create mode 100644 arch/arm/plat-mxc/include/mach/mx51.h
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
new file mode 100644
index 0000000..be90c03
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -0,0 +1,825 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+
+#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+ u32 reg;
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+ reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+ struct clk *m1, struct clk *m2, struct clk *m3)
+{
+ if (parent == m0)
+ return 0;
+ else if (parent == m1)
+ return 1;
+ else if (parent == m2)
+ return 2;
+ else if (parent == m3)
+ return 3;
+ else
+ BUG();
+
+ return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+ if (pll == &pll1_main_clk)
+ return MX51_DPLL1_BASE;
+ else if (pll == &pll2_sw_clk)
+ return MX51_DPLL2_BASE;
+ else if (pll == &pll3_sw_clk)
+ return MX51_DPLL3_BASE;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+ void __iomem *pllbase;
+ s64 temp;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pllbase = _get_pll_base(clk);
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ /* Sign extend to 32-bits */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xFC000000;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk = 2 * parent_rate;
+ if (dbl != 0)
+ ref_clk *= 2;
+
+ ref_clk /= (pdf + 1);
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ void __iomem *pllbase;
+
+ long mfi, pdf, mfn, mfd = 999999;
+ s64 temp64;
+ unsigned long quad_parent_rate;
+ unsigned long pll_hfsm, dp_ctl;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pllbase = _get_pll_base(clk);
+
+ quad_parent_rate = 4 * parent_rate;
+ pdf = mfi = -1;
+ while (++pdf < 16 && mfi < 5)
+ mfi = rate * (pdf+1) / quad_parent_rate;
+ if (mfi > 15)
+ return -EINVAL;
+ pdf--;
+
+ temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate/1000000);
+ mfn = (long)temp64;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ /* use dpdck0_2 */
+ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+ } else {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+ u32 reg;
+ void __iomem *pllbase;
+ int i = 0;
+
+ pllbase = _get_pll_base(clk);
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_LRF)
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: pll locking failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+ u32 reg;
+ void __iomem *pllbase;
+
+ pllbase = _get_pll_base(clk);
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, step;
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ /* When switching from pll_main_clk to a bypass clock, first select a
+ * multiplexed clock in 'step_sel', then shift the glitchless mux
+ * 'pll1_sw_clk_sel'.
+ *
+ * When switching back, do it in reverse order
+ */
+ if (parent == &pll1_main_clk) {
+ /* Switch to pll1_main_clk */
+ reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+ __raw_writel(reg, MXC_CCM_CCSR);
+ /* step_clk mux switched to lp_apm, to save power. */
+ reg = __raw_readl(MXC_CCM_CCSR);
+ reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+ reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+ MXC_CCM_CCSR_STEP_SEL_OFFSET);
+ } else {
+ if (parent == &lp_apm_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+ } else if (parent == &pll2_sw_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+ } else if (parent == &pll3_sw_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+ } else
+ return -EINVAL;
+
+ reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+ reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+ /* Switch to step_clk */
+ reg = __raw_readl(MXC_CCM_CCSR);
+ reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+ }
+ __raw_writel(reg, MXC_CCM_CCSR);
+ return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ if (clk->parent == &pll2_sw_clk) {
+ div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+ MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+ } else if (clk->parent == &pll3_sw_clk) {
+ div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+ MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+ } else
+ div = 1;
+ return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ if (parent == &pll2_sw_clk)
+ reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+ else
+ reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+ return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ if (parent == &osc_clk)
+ reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+
+ return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+ u32 cacrr, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ cacrr = __raw_readl(MXC_CCM_CACRR);
+ div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+ return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+ int i = 0;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+ reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCMR);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(MXC_CCM_CDHIPR);
+ if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: Set parent for periph_apm clock failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+
+ if (parent == &pll2_sw_clk)
+ reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+ else if (parent == &periph_apm_clk)
+ reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ return 0;
+}
+
+static struct clk main_bus_clk = {
+ .parent = &pll2_sw_clk,
+ .set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+ MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+ return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+ int i = 0;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+ reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(MXC_CCM_CDHIPR);
+ if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: clk_ahb_set_rate failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8)
+ div = 8;
+ else if (div == 0)
+ div++;
+ return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+
+ /* Handshake with MAX when LPM is entered. */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable_inwait(clk);
+
+ /* No Handshake with MAX when LPM is entered as its disabled. */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+ MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+ return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+ u32 reg, prediv1, prediv2, podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+ /* the main_bus_clk is the one before the DVFS engine */
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+ prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+ podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+ return parent_rate / (prediv1 * prediv2 * podf);
+ } else if (clk->parent == &ipg_clk)
+ return parent_rate;
+ else
+ BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CBCMR);
+
+ reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+ reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+ if (parent == &ipg_clk)
+ reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+ else if (parent == &lp_apm_clk)
+ reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+ else if (parent != &main_bus_clk)
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CBCMR);
+
+ return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+ u32 reg, prediv, podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CSCDR1);
+ prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+ MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+ podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+ return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+ &lp_apm_clk);
+ reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CSCMR1);
+
+ return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+ return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+ return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+ .get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+ .get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+ .parent = &osc_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ * CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ * | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+ .parent = &pll1_main_clk,
+ .set_parent = _clk_pll1_sw_set_parent,
+ .get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+ .parent = &osc_clk,
+ .get_rate = clk_pll_get_rate,
+ .set_rate = _clk_pll_set_rate,
+ .set_parent = _clk_pll2_sw_set_parent,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+ .parent = &osc_clk,
+ .set_rate = _clk_pll_set_rate,
+ .get_rate = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+ .parent = &osc_clk,
+ .set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+ .parent = &pll1_sw_clk,
+ .set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+ .parent = &pll1_sw_clk,
+ .get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+ .parent = &main_bus_clk,
+ .get_rate = clk_ahb_get_rate,
+ .set_rate = _clk_ahb_set_rate,
+ .round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+ .parent = &ahb_clk,
+ .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+ .parent = &lp_apm_clk,
+ .get_rate = clk_ipg_per_get_rate,
+ .set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+ .parent = &pll2_sw_clk,
+ .get_rate = clk_uart_get_rate,
+ .set_parent = _clk_uart_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+ .parent = &ahb_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+ .enable = _clk_max_enable,
+ .disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+ .id = 0,
+ .parent = &ckil_clk,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = _clk_ccgr_enable, \
+ .disable = _clk_ccgr_disable, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+ get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_perclk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+};
+
+static void clk_tree_init(void)
+{
+ u32 reg;
+
+ ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+ /*
+ * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+ * 8MHz, its derived from lp_apm.
+ *
+ * FIXME: Verify if true for all boards
+ */
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+ reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+ __raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2)
+{
+ int i;
+
+ external_low_reference = ckil;
+ external_high_reference = ckih1;
+ ckih2_reference = ckih2;
+ oscillator_reference = osc;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ clk_tree_init();
+
+ clk_enable(&cpu_clk);
+ clk_enable(&main_bus_clk);
+
+ /* System timer */
+ mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+ MX51_MXC_INT_GPT);
+ return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
new file mode 100644
index 0000000..41c769f
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later@the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+static int __init post_cpu_init(void)
+{
+ unsigned int reg;
+ void __iomem *base;
+
+ if (!cpu_is_mx51())
+ return 0;
+
+ base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+
+ base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+
+ return 0;
+}
+
+postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
new file mode 100644
index 0000000..c776b9a
--- /dev/null
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_MFNMINUS 0x14
+#define MXC_PLL_DP_MFNPLUS 0x18
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+#define MXC_PLL_DP_MFN_TOGC 0x28
+#define MXC_PLL_DP_DESTAT 0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_CONFIG_BIST 0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
+#define MXC_PLL_DP_CONFIG_AREN 0x2
+#define MXC_PLL_DP_CONFIG_LDREQ 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0x0
+#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN (1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
+#define MXC_CCM_CCR_FPM_EN (1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET (0)
+#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY (1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
+#define MXC_CCM_CSR_FPM_READY (1 << 1)
+#define MXC_CCM_CSR_REF_EN_B (1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
+ 1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
+#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET (0)
+#define MXC_CCM_CLPCR_LPM_MASK (0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1 (0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK 0x3
+#define MXC_CCM_CCGRx_MOD_OFF 0x0
+#define MXC_CCM_CCGRx_MOD_ON 0x3
+#define MXC_CCM_CCGRx_MOD_IDLE 0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET 30
+#define MXC_CCM_CCGRx_CG14_OFFSET 28
+#define MXC_CCM_CCGRx_CG13_OFFSET 26
+#define MXC_CCM_CCGRx_CG12_OFFSET 24
+#define MXC_CCM_CCGRx_CG11_OFFSET 22
+#define MXC_CCM_CCGRx_CG10_OFFSET 20
+#define MXC_CCM_CCGRx_CG9_OFFSET 18
+#define MXC_CCM_CCGRx_CG8_OFFSET 16
+#define MXC_CCM_CCGRx_CG7_OFFSET 14
+#define MXC_CCM_CCGRx_CG6_OFFSET 12
+#define MXC_CCM_CCGRx_CG5_OFFSET 10
+#define MXC_CCM_CCGRx_CG4_OFFSET 8
+#define MXC_CCM_CCGRx_CG3_OFFSET 6
+#define MXC_CCM_CCGRx_CG2_OFFSET 4
+#define MXC_CCM_CCGRx_CG1_OFFSET 2
+#define MXC_CCM_CCGRx_CG0_OFFSET 0
+
+#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET 8
+#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR 1
+#define MXC_SRPGCR_PCR 1
+#define MXC_EMPGCR_PCR 1
+#define MXC_PGSR_PSR 1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
new file mode 100644
index 0000000..d6fd396
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+ {
+ .start = MX51_UART1_BASE_ADDR,
+ .end = MX51_UART1_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_UART1,
+ .end = MX51_MXC_INT_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = MX51_UART2_BASE_ADDR,
+ .end = MX51_UART2_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_UART2,
+ .end = MX51_MXC_INT_UART2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = MX51_UART3_BASE_ADDR,
+ .end = MX51_UART3_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_UART3,
+ .end = MX51_MXC_INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource mxc_fec_resources[] = {
+ {
+ .start = MX51_MXC_FEC_BASE_ADDR,
+ .end = MX51_MXC_FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_FEC,
+ .end = MX51_MXC_INT_FEC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fec_resources),
+ .resource = mxc_fec_resources,
+};
+
+/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
+int __init mxc_register_gpios(void)
+{
+ return 0;
+}
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
new file mode 100644
index 0000000..f339ab8
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.h
@@ -0,0 +1,4 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_fec_device;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
new file mode 100644
index 0000000..c21e18b
--- /dev/null
+++ b/arch/arm/mach-mx5/mm.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX51 memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+ {
+ .virtual = MX51_IRAM_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
+ .length = MX51_IRAM_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_DEBUG_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
+ .length = MX51_DEBUG_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_TZIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
+ .length = MX51_TZIC_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
+ .length = MX51_AIPS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
+ .length = MX51_SPBA0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
+ .length = MX51_AIPS2_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
+ .length = MX51_NFC_AXI_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx51_map_io(void)
+{
+ u32 tzic_addr;
+
+ if (mx51_revision() < MX51_CHIP_REV_2_0)
+ tzic_addr = 0x8FFFC000;
+ else
+ tzic_addr = 0xE0003000;
+ mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr);
+
+ mxc_set_cpu_type(MXC_CPU_MX51);
+ mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx51_init_irq(void)
+{
+ tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 49f1a4a..0a25576 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,6 +20,7 @@ extern void mx25_map_io(void);
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
+extern void mx51_map_io(void);
extern void mxc91231_map_io(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
@@ -29,6 +30,7 @@ extern void mx25_init_irq(void);
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
extern void mxc91231_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -37,6 +39,8 @@ extern int mx25_clocks_init(unsigned long fref);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2);
extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
new file mode 100644
index 0000000..b4f975e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX51_H__
+#define __MACH_IOMUX_MX51_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+ IOMUX_CONFIG_ALT0,
+ IOMUX_CONFIG_ALT1,
+ IOMUX_CONFIG_ALT2,
+ IOMUX_CONFIG_ALT3,
+ IOMUX_CONFIG_ALT4,
+ IOMUX_CONFIG_ALT5,
+ IOMUX_CONFIG_ALT6,
+ IOMUX_CONFIG_ALT7,
+ IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
+ IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* Pad control groupings */
+#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_DSE_HIGH)
+#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_SRE_FAST)
+#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*
+ * FIXME: This was converted using scripts from existing Freescale code to
+ * this form used upstream. Need to verify the name format.
+ */
+
+/* PAD MUX ALT INPSE PATH PADCTRL */
+
+#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART3 */
+#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
+
+#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
+/* REVISIT: Not sure of these values
+
+ #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
+ #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+ #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+*/
+#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART1 */
+#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
+
+/* Babbage UART2 */
+#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
+
+#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
+ (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS))
+#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+
+/* EIM */
+#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 1deda01..f2f73d3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -81,11 +81,13 @@ struct pad_desc {
#define PAD_CTL_ODE (1 << 3)
-#define PAD_CTL_DSE_STANDARD (0 << 1)
-#define PAD_CTL_DSE_HIGH (1 << 1)
-#define PAD_CTL_DSE_MAX (2 << 1)
+#define PAD_CTL_DSE_LOW (0 << 1)
+#define PAD_CTL_DSE_MED (1 << 1)
+#define PAD_CTL_DSE_HIGH (2 << 1)
+#define PAD_CTL_DSE_MAX (3 << 1)
#define PAD_CTL_SRE_FAST (1 << 0)
+#define PAD_CTL_SRE_SLOW (0 << 0)
/*
* setups a single pad in the iomuxer
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
new file mode 100644
index 0000000..771532b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -0,0 +1,454 @@
+#ifndef __ASM_ARCH_MXC_MX51_H__
+#define __ASM_ARCH_MXC_MX51_H__
+
+/*
+ * MX51 memory map:
+ *
+ *
+ * Virt Phys Size What
+ * ---------------------------------------------------------------------------
+ * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM)
+ * 30000000 256M GPU
+ * 40000000 512M IPU
+ * FA200000 60000000 1M DEBUG
+ * FB100000 70000000 1M SPBA 0
+ * FB000000 73F00000 1M AIPS 1
+ * FB200000 83F00000 1M AIPS 2
+ * FA100000 8FFFC000 16K TZIC (interrupt controller)
+ * 90000000 256M CSD0 SDRAM/DDR
+ * A0000000 256M CSD1 SDRAM/DDR
+ * B0000000 128M CS0 Flash
+ * B8000000 128M CS1 Flash
+ * C0000000 128M CS2 Flash
+ * C8000000 64M CS3 Flash
+ * CC000000 32M CS4 SRAM
+ * CE000000 32M CS5 SRAM
+ * F9000000 CFFF0000 64K NFC (NAND Flash AXI)
+ *
+ */
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000
+#define MX51_IRAM_PARTITIONS 16
+#define MX51_IRAM_PARTITIONS_TO1 12
+#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */
+#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000
+#define MX51_NFC_AXI_SIZE SZ_64K
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX51_GPU_BASE_ADDR 0x20000000
+#define MX51_GPU2D_BASE_ADDR 0xD0000000
+
+#define MX51_TZIC_BASE_ADDR 0x8FFFC000
+#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000
+#define MX51_TZIC_SIZE SZ_16K
+
+#define MX51_DEBUG_BASE_ADDR 0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000
+#define MX51_DEBUG_SIZE SZ_1M
+#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000)
+#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000)
+#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000)
+#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000)
+#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000)
+#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000)
+#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000)
+#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR 0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000
+#define MX51_SPBA0_SIZE SZ_1M
+
+#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1 0x04
+#define MX51_SPBA_SDHC2 0x08
+#define MX51_SPBA_UART3 0x0C
+#define MX51_SPBA_CSPI1 0x10
+#define MX51_SPBA_SSI2 0x14
+#define MX51_SPBA_SDHC3 0x20
+#define MX51_SPBA_SDHC4 0x24
+#define MX51_SPBA_SPDIF 0x28
+#define MX51_SPBA_ATA 0x30
+#define MX51_SPBA_SLIM 0x34
+#define MX51_SPBA_HSI2C 0x38
+#define MX51_SPBA_CTRL 0x3C
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 0x73F00000
+#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000
+#define MX51_AIPS1_SIZE SZ_1M
+
+#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000)
+#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000)
+#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000)
+#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000)
+#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000)
+#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000)
+#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000)
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM 30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#endif /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR 0x83F00000
+#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000
+#define MX51_AIPS2_SIZE SZ_1M
+
+#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000)
+#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000)
+#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000)
+#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000)
+#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000)
+#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000)
+#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
+#define MX51_CSD0_BASE_ADDR 0x90000000
+#define MX51_CSD1_BASE_ADDR 0xA0000000
+#define MX51_CS0_BASE_ADDR 0xB0000000
+#define MX51_CS1_BASE_ADDR 0xB8000000
+#define MX51_CS2_BASE_ADDR 0xC0000000
+#define MX51_CS3_BASE_ADDR 0xC8000000
+#define MX51_CS4_BASE_ADDR 0xCC000000
+#define MX51_CS5_BASE_ADDR 0xCE000000
+
+/* Does given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+ (((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Does given address belongs to the specified named `module'? */
+#define MX51_IS_MODULE(addr, module) \
+ ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
+ MX51_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MX51_IO_ADDRESS(x) \
+ (void __iomem *) \
+ (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+ 0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MX51_IRAM_IO_ADDRESS(x) \
+ (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
+
+#define MX51_TZIC_IO_ADDRESS(x) \
+ (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
+
+#define MX51_DEBUG_IO_ADDRESS(x) \
+ (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
+
+#define MX51_SPBA0_IO_ADDRESS(x) \
+ (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
+
+#define MX51_AIPS1_IO_ADDRESS(x) \
+ (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+
+#define MX51_AIPS2_IO_ADDRESS(x) \
+ (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
+
+#define MX51_NFC_AXI_IO_ADDRESS(x) \
+ (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_SSI3_TX1 47
+#define MX51_DMA_REQ_SSI3_RX1 46
+#define MX51_DMA_REQ_SPDIF 45
+#define MX51_DMA_REQ_UART3_TX 44
+#define MX51_DMA_REQ_UART3_RX 43
+#define MX51_DMA_REQ_SLIM_B_TX 42
+#define MX51_DMA_REQ_SDHC4 41
+#define MX51_DMA_REQ_SDHC3 40
+#define MX51_DMA_REQ_CSPI_TX 39
+#define MX51_DMA_REQ_CSPI_RX 38
+#define MX51_DMA_REQ_SSI3_TX2 37
+#define MX51_DMA_REQ_IPU 36
+#define MX51_DMA_REQ_SSI3_RX2 35
+#define MX51_DMA_REQ_EPIT2 34
+#define MX51_DMA_REQ_CTI2_1 33
+#define MX51_DMA_REQ_EMI_WR 32
+#define MX51_DMA_REQ_CTI2_0 31
+#define MX51_DMA_REQ_EMI_RD 30
+#define MX51_DMA_REQ_SSI1_TX1 29
+#define MX51_DMA_REQ_SSI1_RX1 28
+#define MX51_DMA_REQ_SSI1_TX2 27
+#define MX51_DMA_REQ_SSI1_RX2 26
+#define MX51_DMA_REQ_SSI2_TX1 25
+#define MX51_DMA_REQ_SSI2_RX1 24
+#define MX51_DMA_REQ_SSI2_TX2 23
+#define MX51_DMA_REQ_SSI2_RX2 22
+#define MX51_DMA_REQ_SDHC2 21
+#define MX51_DMA_REQ_SDHC1 20
+#define MX51_DMA_REQ_UART1_TX 19
+#define MX51_DMA_REQ_UART1_RX 18
+#define MX51_DMA_REQ_UART2_TX 17
+#define MX51_DMA_REQ_UART2_RX 16
+#define MX51_DMA_REQ_GPU 15
+#define MX51_DMA_REQ_EXTREQ1 14
+#define MX51_DMA_REQ_FIRI_TX 13
+#define MX51_DMA_REQ_FIRI_RX 12
+#define MX51_DMA_REQ_HS_I2C_RX 11
+#define MX51_DMA_REQ_HS_I2C_TX 10
+#define MX51_DMA_REQ_CSPI2_TX 9
+#define MX51_DMA_REQ_CSPI2_RX 8
+#define MX51_DMA_REQ_CSPI1_TX 7
+#define MX51_DMA_REQ_CSPI1_RX 6
+#define MX51_DMA_REQ_SLIM_B 5
+#define MX51_DMA_REQ_ATA_TX_END 4
+#define MX51_DMA_REQ_ATA_TX 3
+#define MX51_DMA_REQ_ATA_RX 2
+#define MX51_DMA_REQ_GPC 1
+#define MX51_DMA_REQ_VPU 0
+
+/*
+ * Interrupt numbers
+ */
+#define MX51_MXC_INT_BASE 0
+#define MX51_MXC_INT_RESV0 0
+#define MX51_MXC_INT_MMC_SDHC1 1
+#define MX51_MXC_INT_MMC_SDHC2 2
+#define MX51_MXC_INT_MMC_SDHC3 3
+#define MX51_MXC_INT_MMC_SDHC4 4
+#define MX51_MXC_INT_RESV5 5
+#define MX51_MXC_INT_SDMA 6
+#define MX51_MXC_INT_IOMUX 7
+#define MX51_MXC_INT_NFC 8
+#define MX51_MXC_INT_VPU 9
+#define MX51_MXC_INT_IPU_ERR 10
+#define MX51_MXC_INT_IPU_SYN 11
+#define MX51_MXC_INT_GPU 12
+#define MX51_MXC_INT_RESV13 13
+#define MX51_MXC_INT_USB_H1 14
+#define MX51_MXC_INT_EMI 15
+#define MX51_MXC_INT_USB_H2 16
+#define MX51_MXC_INT_USB_H3 17
+#define MX51_MXC_INT_USB_OTG 18
+#define MX51_MXC_INT_SAHARA_H0 19
+#define MX51_MXC_INT_SAHARA_H1 20
+#define MX51_MXC_INT_SCC_SMN 21
+#define MX51_MXC_INT_SCC_STZ 22
+#define MX51_MXC_INT_SCC_SCM 23
+#define MX51_MXC_INT_SRTC_NTZ 24
+#define MX51_MXC_INT_SRTC_TZ 25
+#define MX51_MXC_INT_RTIC 26
+#define MX51_MXC_INT_CSU 27
+#define MX51_MXC_INT_SLIM_B 28
+#define MX51_MXC_INT_SSI1 29
+#define MX51_MXC_INT_SSI2 30
+#define MX51_MXC_INT_UART1 31
+#define MX51_MXC_INT_UART2 32
+#define MX51_MXC_INT_UART3 33
+#define MX51_MXC_INT_RESV34 34
+#define MX51_MXC_INT_RESV35 35
+#define MX51_MXC_INT_CSPI1 36
+#define MX51_MXC_INT_CSPI2 37
+#define MX51_MXC_INT_CSPI 38
+#define MX51_MXC_INT_GPT 39
+#define MX51_MXC_INT_EPIT1 40
+#define MX51_MXC_INT_EPIT2 41
+#define MX51_MXC_INT_GPIO1_INT7 42
+#define MX51_MXC_INT_GPIO1_INT6 43
+#define MX51_MXC_INT_GPIO1_INT5 44
+#define MX51_MXC_INT_GPIO1_INT4 45
+#define MX51_MXC_INT_GPIO1_INT3 46
+#define MX51_MXC_INT_GPIO1_INT2 47
+#define MX51_MXC_INT_GPIO1_INT1 48
+#define MX51_MXC_INT_GPIO1_INT0 49
+#define MX51_MXC_INT_GPIO1_LOW 50
+#define MX51_MXC_INT_GPIO1_HIGH 51
+#define MX51_MXC_INT_GPIO2_LOW 52
+#define MX51_MXC_INT_GPIO2_HIGH 53
+#define MX51_MXC_INT_GPIO3_LOW 54
+#define MX51_MXC_INT_GPIO3_HIGH 55
+#define MX51_MXC_INT_GPIO4_LOW 56
+#define MX51_MXC_INT_GPIO4_HIGH 57
+#define MX51_MXC_INT_WDOG1 58
+#define MX51_MXC_INT_WDOG2 59
+#define MX51_MXC_INT_KPP 60
+#define MX51_MXC_INT_PWM1 61
+#define MX51_MXC_INT_I2C1 62
+#define MX51_MXC_INT_I2C2 63
+#define MX51_MXC_INT_HS_I2C 64
+#define MX51_MXC_INT_RESV65 65
+#define MX51_MXC_INT_RESV66 66
+#define MX51_MXC_INT_SIM_IPB 67
+#define MX51_MXC_INT_SIM_DAT 68
+#define MX51_MXC_INT_IIM 69
+#define MX51_MXC_INT_ATA 70
+#define MX51_MXC_INT_CCM1 71
+#define MX51_MXC_INT_CCM2 72
+#define MX51_MXC_INT_GPC1 73
+#define MX51_MXC_INT_GPC2 74
+#define MX51_MXC_INT_SRC 75
+#define MX51_MXC_INT_NM 76
+#define MX51_MXC_INT_PMU 77
+#define MX51_MXC_INT_CTI_IRQ 78
+#define MX51_MXC_INT_CTI1_TG0 79
+#define MX51_MXC_INT_CTI1_TG1 80
+#define MX51_MXC_INT_MCG_ERR 81
+#define MX51_MXC_INT_MCG_TMR 82
+#define MX51_MXC_INT_MCG_FUNC 83
+#define MX51_MXC_INT_GPU2_IRQ 84
+#define MX51_MXC_INT_GPU2_BUSY 85
+#define MX51_MXC_INT_RESV86 86
+#define MX51_MXC_INT_FEC 87
+#define MX51_MXC_INT_OWIRE 88
+#define MX51_MXC_INT_CTI1_TG2 89
+#define MX51_MXC_INT_SJC 90
+#define MX51_MXC_INT_SPDIF 91
+#define MX51_MXC_INT_TVE 92
+#define MX51_MXC_INT_FIRI 93
+#define MX51_MXC_INT_PWM2 94
+#define MX51_MXC_INT_SLIM_EXP 95
+#define MX51_MXC_INT_SSI3 96
+#define MX51_MXC_INT_EMI_BOOT 97
+#define MX51_MXC_INT_CTI1_TG3 98
+#define MX51_MXC_INT_SMC_RX 99
+#define MX51_MXC_INT_VPU_IDLE 100
+#define MX51_MXC_INT_EMI_NFC 101
+#define MX51_MXC_INT_GPU_IDLE 102
+
+/* silicon revisions specific to i.MX51 */
+#define MX51_CHIP_REV_1_0 0x10
+#define MX51_CHIP_REV_1_1 0x11
+#define MX51_CHIP_REV_1_2 0x12
+#define MX51_CHIP_REV_1_3 0x13
+#define MX51_CHIP_REV_2_0 0x20
+#define MX51_CHIP_REV_2_1 0x21
+#define MX51_CHIP_REV_2_2 0x22
+#define MX51_CHIP_REV_2_3 0x23
+#define MX51_CHIP_REV_3_0 0x30
+#define MX51_CHIP_REV_3_1 0x31
+#define MX51_CHIP_REV_3_2 0x32
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline unsigned int mx51_revision(void)
+{
+ return system_rev;
+}
+#endif
+
+#endif /* __ASM_ARCH_MXC_MX51_H__ */
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-05 16:26 ` [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 6/7] mxc: Add mx51_defconfig Amit Kucheria
` (2 more replies)
0 siblings, 3 replies; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
Babbage is a reference board from Freescale for their i.MX51 SoC.
Add board definition, Kconfig and Makefiles to enable Freescale i.MX51
processor and Babbage board.
Boot tested on a Babbage2.5 board
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/Makefile | 1 +
arch/arm/mach-mx5/Kconfig | 17 ++++++
arch/arm/mach-mx5/Makefile | 9 +++
arch/arm/mach-mx5/Makefile.boot | 3 +
arch/arm/mach-mx5/board-mx51_babbage.c | 98 ++++++++++++++++++++++++++++++++
arch/arm/plat-mxc/Kconfig | 8 +++
6 files changed, 136 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mx5/Kconfig
create mode 100644 arch/arm/mach-mx5/Makefile
create mode 100644 arch/arm/mach-mx5/Makefile.boot
create mode 100644 arch/arm/mach-mx5/board-mx51_babbage.c
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9e75825..52232d2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
new file mode 100644
index 0000000..80a749c
--- /dev/null
+++ b/arch/arm/mach-mx5/Kconfig
@@ -0,0 +1,17 @@
+if ARCH_MX5
+
+config ARCH_MX51
+ bool
+ default y
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+
+comment "MX5 platforms:"
+
+config MACH_MX51_BABBAGE
+ bool "Support MX51 BABBAGE platforms"
+ help
+ Include support for MX51 Babbage platform. This includes specific
+ configurations for the board and its peripherals.
+
+endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
new file mode 100644
index 0000000..bf23f86
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y := cpu.o mm.o clock-mx51.o devices.o
+
+obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
new file mode 100644
index 0000000..9939a19
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x90008000
+params_phys-y := 0x90000100
+initrd_phys-y := 0x90800000
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
new file mode 100644
index 0000000..d5ccb5f
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+static struct platform_device *devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct pad_desc mx51babbage_pads[] = {
+ /* UART1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+
+ /* UART2 */
+ MX51_PAD_UART2_RXD__UART2_RXD,
+ MX51_PAD_UART2_TXD__UART2_TXD,
+
+ /* UART3 */
+ MX51_PAD_EIM_D25__UART3_RXD,
+ MX51_PAD_EIM_D26__UART3_TXD,
+ MX51_PAD_EIM_D27__UART3_RTS,
+ MX51_PAD_EIM_D24__UART3_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+ ARRAY_SIZE(mx51babbage_pads));
+ mxc_init_imx_uart();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx51_babbage_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mxc_timer = {
+ .init = mx51_babbage_timer_init,
+};
+
+MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
+ /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
+ .phys_io = MX51_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx51_map_io,
+ .init_irq = mx51_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 59558c4..cea51a0 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -41,6 +41,13 @@ config ARCH_MXC91231
help
This enables support for systems based on the Freescale MXC91231 family
+config ARCH_MX5
+ bool "MX5-based"
+ select CPU_V7
+ select COMMON_CLKDEV
+ help
+ This enables support for systems based on the Freescale i.MX51 family
+
endchoice
source "arch/arm/mach-mx1/Kconfig"
@@ -48,6 +55,7 @@ source "arch/arm/mach-mx2/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
source "arch/arm/mach-mx25/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
+source "arch/arm/mach-mx5/Kconfig"
endmenu
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 6/7] mxc: Add mx51_defconfig
2010-02-05 16:26 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 7/7] mxc: MAINTAINERS: Add maintainer for mach-mx5 Amit Kucheria
2010-02-05 17:27 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Magnus Lilja
2010-02-07 19:10 ` Fabio Estevam
2 siblings, 1 reply; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
This config is used to test the base support for i.MX51 processors on the
Babbage board
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/configs/mx51_defconfig | 1286 +++++++++++++++++++++++++++++++++++++++
1 files changed, 1286 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/configs/mx51_defconfig
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 0000000..c88e952
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Tue Feb 2 15:20:48 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
+
+#
+# MX5 platforms:
+#
+CONFIG_MACH_MX51_BABBAGE=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_TZIC=y
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_IMX is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_MXC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 7/7] mxc: MAINTAINERS: Add maintainer for mach-mx5
2010-02-05 16:26 ` [PATCHv3 6/7] mxc: Add mx51_defconfig Amit Kucheria
@ 2010-02-05 16:26 ` Amit Kucheria
0 siblings, 0 replies; 15+ messages in thread
From: Amit Kucheria @ 2010-02-05 16:26 UTC (permalink / raw)
To: linux-arm-kernel
Add self to MAINTAINERS for Freescale i.MX5 SoCs
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
MAINTAINERS | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 03f38c1..c56d092 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -662,6 +662,12 @@ T: git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/plat-mxc/
+ARM/FREESCALE IMX51
+M: Amit Kucheria <amit.kucheria@canonical.com>
+L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-mx5/
+
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-05 16:26 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 6/7] mxc: Add mx51_defconfig Amit Kucheria
@ 2010-02-05 17:27 ` Magnus Lilja
2010-02-09 16:06 ` Amit Kucheria
2010-02-07 19:10 ` Fabio Estevam
2 siblings, 1 reply; 15+ messages in thread
From: Magnus Lilja @ 2010-02-05 17:27 UTC (permalink / raw)
To: linux-arm-kernel
Amit Kucheria skrev:
> Babbage is a reference board from Freescale for their i.MX51 SoC.
>
> Add board definition, Kconfig and Makefiles to enable Freescale i.MX51
> processor and Babbage board.
>
> Boot tested on a Babbage2.5 board
In u-boot this board, and the files, are called mx51evk instead of Babbage. It would be nice if the same name is used in both, but no big issue.
Regards, Magnus
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-05 16:26 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 6/7] mxc: Add mx51_defconfig Amit Kucheria
2010-02-05 17:27 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Magnus Lilja
@ 2010-02-07 19:10 ` Fabio Estevam
2010-02-08 14:30 ` Nguyen Dinh-R00091
2010-02-09 0:46 ` Fabio Estevam
2 siblings, 2 replies; 15+ messages in thread
From: Fabio Estevam @ 2010-02-07 19:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi Amit,
...
--- On Fri, 2/5/10, Amit Kucheria <amit.kucheria@canonical.com> wrote:
> +static void __init mx51_babbage_timer_init(void)
> +{
> +??? mx51_clocks_init(32768, 24000000, 22579200, 24576000);
> +}
Would you care to comment about the values of the last two parameters of this function?
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-07 19:10 ` Fabio Estevam
@ 2010-02-08 14:30 ` Nguyen Dinh-R00091
2010-02-09 0:46 ` Fabio Estevam
1 sibling, 0 replies; 15+ messages in thread
From: Nguyen Dinh-R00091 @ 2010-02-08 14:30 UTC (permalink / raw)
To: linux-arm-kernel
Hi Fabio,
the 2 parameters are what we(FSL) use for the correct settings for the mx51 babbage board.
Dinh
-----Original Message-----
From: Fabio Estevam [mailto:fabioestevam at yahoo.com]
Sent: Sunday, February 07, 2010 1:11 PM
To: amit.kucheria at verdurent.com; Amit Kucheria
Cc: linux at arm.linux.org.uk; Nguyen Dinh-R00091; s.hauer at pengutronix.de; grant.likely at secretlab.ca; Herring Robert-RA7055; linux-arm-kernel at lists.infradead.org; daniel at caiaq.de; bryan.wu at canonical.com; eric.miao at canonical.com; valentin.longchamp at epfl.ch
Subject: Re: [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
Hi Amit,
...
--- On Fri, 2/5/10, Amit Kucheria <amit.kucheria@canonical.com> wrote:
> +static void __init mx51_babbage_timer_init(void) {
> +??? mx51_clocks_init(32768, 24000000, 22579200, 24576000); }
Would you care to comment about the values of the last two parameters of this function?
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-07 19:10 ` Fabio Estevam
2010-02-08 14:30 ` Nguyen Dinh-R00091
@ 2010-02-09 0:46 ` Fabio Estevam
2010-02-09 16:56 ` Nguyen Dinh-R00091
1 sibling, 1 reply; 15+ messages in thread
From: Fabio Estevam @ 2010-02-09 0:46 UTC (permalink / raw)
To: linux-arm-kernel
--- On Sun, 2/7/10, Fabio Estevam <fabioestevam@yahoo.com> wrote:
> From: Fabio Estevam <fabioestevam@yahoo.com>
> Subject: Re: [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
> To: amit.kucheria at verdurent.com, "Amit Kucheria" <amit.kucheria@canonical.com>
> Cc: linux at arm.linux.org.uk, Dinh.Nguyen at freescale.com, s.hauer at pengutronix.de, grant.likely at secretlab.ca, r.herring at freescale.com, valentin.longchamp at epfl.ch, daniel at caiaq.de, bryan.wu at canonical.com, eric.miao at canonical.com, linux-arm-kernel at lists.infradead.org
> Date: Sunday, February 7, 2010, 5:10 PM
> Hi Amit,
>
> ...
>
> --- On Fri, 2/5/10, Amit Kucheria <amit.kucheria@canonical.com>
> wrote:
> > +static void __init mx51_babbage_timer_init(void)
> > +{
> > +??? mx51_clocks_init(32768, 24000000, 22579200,
> 24576000);
> > +}
>
> Would you care to comment about the values of the last two
> parameters of this function?
I can see all oscillator values on MX51EVK schematics, except the last one (24.576 MHz). Where did you get this value from?
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-05 17:27 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Magnus Lilja
@ 2010-02-09 16:06 ` Amit Kucheria
0 siblings, 0 replies; 15+ messages in thread
From: Amit Kucheria @ 2010-02-09 16:06 UTC (permalink / raw)
To: linux-arm-kernel
On 10 Feb 05, Magnus Lilja wrote:
> Amit Kucheria skrev:
> > Babbage is a reference board from Freescale for their i.MX51 SoC.
> >
> > Add board definition, Kconfig and Makefiles to enable Freescale i.MX51
> > processor and Babbage board.
> >
> > Boot tested on a Babbage2.5 board
>
> In u-boot this board, and the files, are called mx51evk instead of Babbage. It would be nice if the same name is used in both, but no big issue.
>
> Regards, Magnus
I started to do a patch to move it to EVK but then realised that
arch/arm/tools/mach-types has it as mx51_babbage. So this would cause more
confusion.
I'll just add a comment in the Kconfig help.
Regards,
Amit
--
----------------------------------------------------------------------
Amit Kucheria, Kernel Engineer || amit.kucheria at canonical.com
----------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
2010-02-09 0:46 ` Fabio Estevam
@ 2010-02-09 16:56 ` Nguyen Dinh-R00091
0 siblings, 0 replies; 15+ messages in thread
From: Nguyen Dinh-R00091 @ 2010-02-09 16:56 UTC (permalink / raw)
To: linux-arm-kernel
-----Original Message-----
From: Fabio Estevam [mailto:fabioestevam at yahoo.com]
Sent: Monday, February 08, 2010 6:46 PM
To: amit.kucheria at verdurent.com; Amit Kucheria
Cc: linux at arm.linux.org.uk; Nguyen Dinh-R00091; s.hauer at pengutronix.de; grant.likely at secretlab.ca; Herring Robert-RA7055; valentin.longchamp at epfl.ch; daniel at caiaq.de; bryan.wu at canonical.com; eric.miao at canonical.com; linux-arm-kernel at lists.infradead.org
Subject: Re: [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)
--- On Sun, 2/7/10, Fabio Estevam <fabioestevam@yahoo.com> wrote:
> From: Fabio Estevam <fabioestevam@yahoo.com>
> Subject: Re: [PATCHv3 5/7] mxc: Add support for the Babbage board
> (i.MX5)
> To: amit.kucheria at verdurent.com, "Amit Kucheria"
> <amit.kucheria@canonical.com>
> Cc: linux at arm.linux.org.uk, Dinh.Nguyen at freescale.com,
> s.hauer at pengutronix.de, grant.likely at secretlab.ca,
> r.herring at freescale.com, valentin.longchamp at epfl.ch, daniel at caiaq.de,
> bryan.wu at canonical.com, eric.miao at canonical.com,
> linux-arm-kernel at lists.infradead.org
> Date: Sunday, February 7, 2010, 5:10 PM Hi Amit,
>
> ...
>
> --- On Fri, 2/5/10, Amit Kucheria <amit.kucheria@canonical.com>
> wrote:
> > +static void __init mx51_babbage_timer_init(void) {
> > +??? mx51_clocks_init(32768, 24000000, 22579200,
> 24576000);
> > +}
>
> Would you care to comment about the values of the last two parameters
> of this function?
I can see all oscillator values on MX51EVK schematics, except the last one (24.576 MHz). Where did you get this value from?
[DN] It may not be shown from the schematic, but this is value we(FSL) received from the board design team.
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv3 6/7] mxc: Add mx51_defconfig
2010-02-09 16:59 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
@ 2010-02-09 16:59 ` Amit Kucheria
0 siblings, 0 replies; 15+ messages in thread
From: Amit Kucheria @ 2010-02-09 16:59 UTC (permalink / raw)
To: linux-arm-kernel
This config is used to test the base support for i.MX51 processors on the
Babbage board
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/configs/mx51_defconfig | 1286 +++++++++++++++++++++++++++++++++++++++
1 files changed, 1286 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/configs/mx51_defconfig
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 0000000..c88e952
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Tue Feb 2 15:20:48 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
+
+#
+# MX5 platforms:
+#
+CONFIG_MACH_MX51_BABBAGE=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_TZIC=y
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_IMX is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_MXC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--
1.6.3.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2010-02-09 16:59 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-05 16:26 [PATCHv3 0/7] Initial Freescale i.MX51 SoC support Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 2/7] mxc: refactor timer code to use timer versions Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5 Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 6/7] mxc: Add mx51_defconfig Amit Kucheria
2010-02-05 16:26 ` [PATCHv3 7/7] mxc: MAINTAINERS: Add maintainer for mach-mx5 Amit Kucheria
2010-02-05 17:27 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Magnus Lilja
2010-02-09 16:06 ` Amit Kucheria
2010-02-07 19:10 ` Fabio Estevam
2010-02-08 14:30 ` Nguyen Dinh-R00091
2010-02-09 0:46 ` Fabio Estevam
2010-02-09 16:56 ` Nguyen Dinh-R00091
2010-02-09 16:59 [PATCHv3 0/7] Initial Freescale i.MX51 SoC support Amit Kucheria
2010-02-09 16:59 ` [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family Amit Kucheria
2010-02-09 16:59 ` [PATCHv3 2/7] mxc: refactor timer code to use timer versions Amit Kucheria
2010-02-09 16:59 ` [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5 Amit Kucheria
2010-02-09 16:59 ` [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series Amit Kucheria
2010-02-09 16:59 ` [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) Amit Kucheria
2010-02-09 16:59 ` [PATCHv3 6/7] mxc: Add mx51_defconfig Amit Kucheria
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.