From: Jan Stancek <jstancek@redhat.com> To: Naresh Kamboju <naresh.kamboju@linaro.org>, LTP List <ltp@lists.linux.it> Cc: Linux Stable maillist <stable@vger.kernel.org>, CKI Project <cki-project@redhat.com>, Memory Management <mm-qe@redhat.com> Subject: Re: ❌ FAIL: Stable queue: queue-5.3 Date: Sun, 27 Oct 2019 05:32:23 -0400 (EDT) [thread overview] Message-ID: <2111263587.9218283.1572168743324.JavaMail.zimbra@redhat.com> (raw) In-Reply-To: <CA+G9fYurG8gSO+xFc5LJvLMrqTyHG85oxH9=pSQ1LmPCa6PkqQ@mail.gmail.com> ----- Original Message ----- > Hi Jan, > > On Sun, 27 Oct 2019 at 04:04, CKI Project <cki-project@redhat.com> wrote: > > > > > > Hello, > > > > We ran automated tests on a patchset that was proposed for merging into > > this > > kernel tree. The patches were applied to: > > > > Kernel repo: > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git > > Commit: 365dab61f74e - Linux 5.3.7 > > > > The results of these automated tests are provided below. > > > > Overall result: FAILED (see details below) > > Merge: OK > > Compile: OK > > Tests: FAILED > > > > All kernel binaries, config files, and logs are available for download > > here: > > > > https://artifacts.cki-project.org/pipelines/249576 > > > > One or more kernel tests failed: > > > > x86_64: > > ❌ LTP lite > > I see these three failures from the logs, [CC LTP list] > > LTP syscalls: > fallocate05 FAIL 1 tst_mkfs.c:89: INFO: Formatting /dev/loop0 with ext4 opts='' extra opts='' mke2fs 1.45.3 (14-Jul-2019) tst_test.c:1116: INFO: Timeout per run is 0h 05m 00s tst_fill_fs.c:29: INFO: Creating file mntpoint/file0 size 21710183 tst_fill_fs.c:29: INFO: Creating file mntpoint/file1 size 8070086 tst_fill_fs.c:29: INFO: Creating file mntpoint/file2 size 3971177 tst_fill_fs.c:29: INFO: Creating file mntpoint/file3 size 36915315 tst_fill_fs.c:29: INFO: Creating file mntpoint/file4 size 70310993 tst_fill_fs.c:29: INFO: Creating file mntpoint/file5 size 4807935 tst_fill_fs.c:29: INFO: Creating file mntpoint/file6 size 90739786 tst_fill_fs.c:29: INFO: Creating file mntpoint/file7 size 76896492 tst_fill_fs.c:49: INFO: write(): ENOSPC (28) fallocate05.c:50: PASS: write() wrote 8192 bytes fallocate05.c:54: FAIL: fallocate() succeeded unexpectedly So, test filled filesystem and fallocate() succeeded anyway. > > LTP mm: > oom03 FAIL 2 > oom05 FAIL 2 This looks like test issue. systemd on Fedora31 started using cgroup2 exclusively: cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,seclabel,nsdelegate) Tests are trying to mount single hierarchy on cgroup1: [pid 283933] 04:57:26 mkdir("/dev/cgroup", 0777) = 0 [pid 283933] 04:57:26 mount("memcg", "/dev/cgroup", "cgroup", 0, "memory") = -1 EBUSY (Device or resource busy)
WARNING: multiple messages have this Message-ID (diff)
From: Jan Stancek <jstancek@redhat.com> To: ltp@lists.linux.it Subject: [LTP] ❌ FAIL: Stable queue: queue-5.3 Date: Sun, 27 Oct 2019 05:32:23 -0400 (EDT) [thread overview] Message-ID: <2111263587.9218283.1572168743324.JavaMail.zimbra@redhat.com> (raw) In-Reply-To: <CA+G9fYurG8gSO+xFc5LJvLMrqTyHG85oxH9=pSQ1LmPCa6PkqQ@mail.gmail.com> ----- Original Message ----- > Hi Jan, > > On Sun, 27 Oct 2019 at 04:04, CKI Project <cki-project@redhat.com> wrote: > > > > > > Hello, > > > > We ran automated tests on a patchset that was proposed for merging into > > this > > kernel tree. The patches were applied to: > > > > Kernel repo: > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git > > Commit: 365dab61f74e - Linux 5.3.7 > > > > The results of these automated tests are provided below. > > > > Overall result: FAILED (see details below) > > Merge: OK > > Compile: OK > > Tests: FAILED > > > > All kernel binaries, config files, and logs are available for download > > here: > > > > https://artifacts.cki-project.org/pipelines/249576 > > > > One or more kernel tests failed: > > > > x86_64: > > ? LTP lite > > I see these three failures from the logs, [CC LTP list] > > LTP syscalls: > fallocate05 FAIL 1 tst_mkfs.c:89: INFO: Formatting /dev/loop0 with ext4 opts='' extra opts='' mke2fs 1.45.3 (14-Jul-2019) tst_test.c:1116: INFO: Timeout per run is 0h 05m 00s tst_fill_fs.c:29: INFO: Creating file mntpoint/file0 size 21710183 tst_fill_fs.c:29: INFO: Creating file mntpoint/file1 size 8070086 tst_fill_fs.c:29: INFO: Creating file mntpoint/file2 size 3971177 tst_fill_fs.c:29: INFO: Creating file mntpoint/file3 size 36915315 tst_fill_fs.c:29: INFO: Creating file mntpoint/file4 size 70310993 tst_fill_fs.c:29: INFO: Creating file mntpoint/file5 size 4807935 tst_fill_fs.c:29: INFO: Creating file mntpoint/file6 size 90739786 tst_fill_fs.c:29: INFO: Creating file mntpoint/file7 size 76896492 tst_fill_fs.c:49: INFO: write(): ENOSPC (28) fallocate05.c:50: PASS: write() wrote 8192 bytes fallocate05.c:54: FAIL: fallocate() succeeded unexpectedly So, test filled filesystem and fallocate() succeeded anyway. > > LTP mm: > oom03 FAIL 2 > oom05 FAIL 2 This looks like test issue. systemd on Fedora31 started using cgroup2 exclusively: cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,seclabel,nsdelegate) Tests are trying to mount single hierarchy on cgroup1: [pid 283933] 04:57:26 mkdir("/dev/cgroup", 0777) = 0 [pid 283933] 04:57:26 mount("memcg", "/dev/cgroup", "cgroup", 0, "memory") = -1 EBUSY (Device or resource busy)
next prev parent reply other threads:[~2019-10-27 9:32 UTC|newest] Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-26 22:33 ❌ FAIL: Stable queue: queue-5.3 CKI Project 2019-10-27 7:02 ` Naresh Kamboju 2019-10-27 9:32 ` Jan Stancek [this message] 2019-10-27 9:32 ` [LTP] " Jan Stancek -- strict thread matches above, loose matches on Subject: below -- 2019-11-26 2:00 CKI Project 2019-11-22 1:23 CKI Project 2019-11-18 15:00 CKI Project 2019-11-19 0:07 ` [LTP] " Rachel Sibley 2019-11-19 12:37 ` Laura Abbott 2019-11-19 12:44 ` Greg KH 2019-11-19 12:50 ` Laura Abbott 2019-11-21 17:53 ` Greg KH 2019-11-11 21:58 CKI Project 2019-11-11 19:57 CKI Project 2019-11-11 15:36 CKI Project 2019-11-11 20:10 ` Rachel Sibley 2019-11-11 20:47 ` Laura Abbott 2019-11-11 12:50 CKI Project 2019-11-11 11:43 CKI Project 2019-11-10 16:12 CKI Project 2019-11-08 23:24 CKI Project 2019-11-08 21:16 CKI Project 2019-11-08 21:55 ` Ondrej Mosnacek 2019-11-08 5:51 CKI Project 2019-11-06 20:56 CKI Project 2019-11-07 10:22 ` Hangbin Liu 2019-11-05 2:51 CKI Project 2019-11-05 1:14 CKI Project 2019-11-05 6:37 ` Greg KH 2019-11-05 8:15 ` Naresh Kamboju 2019-11-04 11:21 CKI Project 2019-10-30 20:12 CKI Project 2019-10-29 20:22 CKI Project 2019-10-29 17:48 CKI Project 2019-10-28 2:44 CKI Project 2019-10-28 2:30 CKI Project 2019-10-28 1:22 CKI Project 2019-10-27 23:47 CKI Project 2019-10-27 14:34 CKI Project 2019-10-27 9:18 CKI Project 2019-10-27 9:08 CKI Project 2019-10-27 9:20 ` Sasha Levin 2019-10-25 11:25 CKI Project 2019-10-22 2:54 CKI Project 2019-10-16 14:03 CKI Project 2019-10-16 13:56 CKI Project 2019-10-15 22:30 CKI Project 2019-10-15 6:39 CKI Project 2019-10-15 4:49 CKI Project 2019-10-10 13:17 CKI Project 2019-10-10 10:26 CKI Project 2019-10-10 10:51 ` Veronika Kabatova 2019-10-10 6:43 CKI Project 2019-10-09 22:11 CKI Project 2019-10-09 22:44 ` Sasha Levin 2019-10-10 1:09 ` Don Zickus 2019-10-10 6:30 ` Naresh Kamboju 2019-10-16 17:25 ` ? " Jakub Racek 2019-10-08 19:17 ❌ " CKI Project 2019-10-08 19:10 CKI Project 2019-10-08 18:03 CKI Project 2019-10-08 18:57 ` Greg KH 2019-10-06 4:57 CKI Project 2019-10-01 19:25 CKI Project 2019-10-01 18:32 CKI Project 2019-10-01 19:19 ` Greg KH
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=2111263587.9218283.1572168743324.JavaMail.zimbra@redhat.com \ --to=jstancek@redhat.com \ --cc=cki-project@redhat.com \ --cc=ltp@lists.linux.it \ --cc=mm-qe@redhat.com \ --cc=naresh.kamboju@linaro.org \ --cc=stable@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.