* [PATCH v8 0/6] ARM: rockchip: add smp functionality
@ 2014-02-25 11:44 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:44 UTC (permalink / raw)
To: linux-arm-kernel
This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.
To achieve this, add the scu, the needed sram and power-management-unit.
Tested on both a BQ Curie2 (rk3066a / dual core) and
on a Radxa Rock (rk3188 / quad core).
As this version again involves bigger changes to the way reserved sram-
regions are handled, I've dropped the ACKs I had for binding and driver
changes again and therefore would be very happy if I could get new ones
if applicable (dt-maintainers and Philipp Zabel for sram.c).
changes since v7:
- move reserved sram regions to be described through subnodes, similar
to the general memory-reserve bindings, as suggested by Grant Likely.
changes since v6:
- address comments from Mark Rutland
- using of_property_read_u32_index instead of parsing the list manually
- include v4 of "of: add functions to count number of elements in a property"
to not have to count property-elements manually anymore
changes since v5:
- Grant Likely liked it better to "specify reserved regions of the
memory instead of the valid ranges", so go back to the mmio-sram-reserved
property originally suggested by Rob Herring
changes since v4:
- rebase on top of the recent rk3188 board support
- implement suggestion from Matt Sealey in moving the sram-limit from
marking reserved regions to marking available regions - hopefully
I got the usage right
- remove __CPUINIT as suggested by Fabio Estevam
changes since v3:
- address comments from Rob Herring:
- split the gathering of the reserve-data into a separate loop
- spelling and style fixes
- first patch only included for reference, already part of the
char-misc git tree
changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel
changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
sram nodes
- the sram content is kept intact while the device is running, so
copying the trampoline is only needed once
Heiko Stuebner (6):
dt-bindings: sram: describe option to reserve parts of the memory
misc: sram: implement reserved sram areas
ARM: rockchip: add snoop-control-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add power-management-unit
ARM: rockchip: add smp bringup code
.../devicetree/bindings/arm/rockchip/pmu.txt | 16 ++
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 ++++
Documentation/devicetree/bindings/misc/sram.txt | 33 ++++
arch/arm/boot/dts/rk3066a.dtsi | 13 ++
arch/arm/boot/dts/rk3188.dtsi | 13 ++
arch/arm/boot/dts/rk3xxx.dtsi | 10 ++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++
arch/arm/mach-rockchip/headsmp.S | 30 ++++
arch/arm/mach-rockchip/platsmp.c | 184 +++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
drivers/misc/sram.c | 125 +++++++++++++-
13 files changed, 473 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
--
1.8.5.3
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v8 0/6] ARM: rockchip: add smp functionality
@ 2014-02-25 11:44 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:44 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Mark Rutland, devicetree, Pawel Moll, Stephen Warren,
Greg Kroah-Hartman, Ian Campbell, linux-kernel, arm,
Philipp Zabel, Grant Likely
This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.
To achieve this, add the scu, the needed sram and power-management-unit.
Tested on both a BQ Curie2 (rk3066a / dual core) and
on a Radxa Rock (rk3188 / quad core).
As this version again involves bigger changes to the way reserved sram-
regions are handled, I've dropped the ACKs I had for binding and driver
changes again and therefore would be very happy if I could get new ones
if applicable (dt-maintainers and Philipp Zabel for sram.c).
changes since v7:
- move reserved sram regions to be described through subnodes, similar
to the general memory-reserve bindings, as suggested by Grant Likely.
changes since v6:
- address comments from Mark Rutland
- using of_property_read_u32_index instead of parsing the list manually
- include v4 of "of: add functions to count number of elements in a property"
to not have to count property-elements manually anymore
changes since v5:
- Grant Likely liked it better to "specify reserved regions of the
memory instead of the valid ranges", so go back to the mmio-sram-reserved
property originally suggested by Rob Herring
changes since v4:
- rebase on top of the recent rk3188 board support
- implement suggestion from Matt Sealey in moving the sram-limit from
marking reserved regions to marking available regions - hopefully
I got the usage right
- remove __CPUINIT as suggested by Fabio Estevam
changes since v3:
- address comments from Rob Herring:
- split the gathering of the reserve-data into a separate loop
- spelling and style fixes
- first patch only included for reference, already part of the
char-misc git tree
changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel
changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
sram nodes
- the sram content is kept intact while the device is running, so
copying the trampoline is only needed once
Heiko Stuebner (6):
dt-bindings: sram: describe option to reserve parts of the memory
misc: sram: implement reserved sram areas
ARM: rockchip: add snoop-control-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add power-management-unit
ARM: rockchip: add smp bringup code
.../devicetree/bindings/arm/rockchip/pmu.txt | 16 ++
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 ++++
Documentation/devicetree/bindings/misc/sram.txt | 33 ++++
arch/arm/boot/dts/rk3066a.dtsi | 13 ++
arch/arm/boot/dts/rk3188.dtsi | 13 ++
arch/arm/boot/dts/rk3xxx.dtsi | 10 ++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++
arch/arm/mach-rockchip/headsmp.S | 30 ++++
arch/arm/mach-rockchip/platsmp.c | 184 +++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
drivers/misc/sram.c | 125 +++++++++++++-
13 files changed, 473 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
--
1.8.5.3
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory
2014-02-25 11:44 ` Heiko Stübner
(?)
@ 2014-02-25 11:45 ` Heiko Stübner
-1 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:45 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
Some SoCs need parts of their sram for special purposes. So while being part
of the peripheral, it should not be part of the genpool controlling the sram.
Therefore add the option to define reserved regions as subnodes of the
sram-node similar to defining reserved global memory regions.
Originally
Suggested-by: Rob Herring <robherring2@gmail.com>
Using subnodes for reserved regions
Suggested-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Documentation/devicetree/bindings/misc/sram.txt | 33 +++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e..2d83758 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,42 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should be empty
+
+Required properties in the area nodes:
+
+- reg : iomem address range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition
+
Example:
sram: sram@5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@5c000100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x5c000100 0x50>;
+ };
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-25 11:45 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:45 UTC (permalink / raw)
To: linux-arm-kernel
Some SoCs need parts of their sram for special purposes. So while being part
of the peripheral, it should not be part of the genpool controlling the sram.
Therefore add the option to define reserved regions as subnodes of the
sram-node similar to defining reserved global memory regions.
Originally
Suggested-by: Rob Herring <robherring2@gmail.com>
Using subnodes for reserved regions
Suggested-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Documentation/devicetree/bindings/misc/sram.txt | 33 +++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e..2d83758 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,42 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should be empty
+
+Required properties in the area nodes:
+
+- reg : iomem address range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition
+
Example:
sram: sram at 5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram at 5c000100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x5c000100 0x50>;
+ };
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-25 11:45 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:45 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: arm-DgEjT+Ai2ygdnm+yROfE0A, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell
Some SoCs need parts of their sram for special purposes. So while being part
of the peripheral, it should not be part of the genpool controlling the sram.
Therefore add the option to define reserved regions as subnodes of the
sram-node similar to defining reserved global memory regions.
Originally
Suggested-by: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Using subnodes for reserved regions
Suggested-by: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Tested-by: Ulrich Prinz <ulrich.prinz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
Documentation/devicetree/bindings/misc/sram.txt | 33 +++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e..2d83758 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,42 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should be empty
+
+Required properties in the area nodes:
+
+- reg : iomem address range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition
+
Example:
sram: sram@5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@5c000100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x5c000100 0x50>;
+ };
};
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 33+ messages in thread* Re: [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory
2014-02-25 11:45 ` Heiko Stübner
(?)
@ 2014-02-25 13:19 ` Arnd Bergmann
-1 siblings, 0 replies; 33+ messages in thread
From: Arnd Bergmann @ 2014-02-25 13:19 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-arm-kernel, arm, Grant Likely, Rob Herring, devicetree,
Philipp Zabel, linux-kernel, Greg Kroah-Hartman, Pawel Moll,
Mark Rutland, Stephen Warren, Ian Campbell, Sachin Kamat
On Tuesday 25 February 2014, Heiko Stübner wrote:
> Some SoCs need parts of their sram for special purposes. So while being part
> of the peripheral, it should not be part of the genpool controlling the sram.
>
> Therefore add the option to define reserved regions as subnodes of the
> sram-node similar to defining reserved global memory regions.
[adding Sachin Kamat to Cc, he just had the same issue]
> Originally
> Suggested-by: Rob Herring <robherring2@gmail.com>
>
> Using subnodes for reserved regions
> Suggested-by: Grant Likely <grant.likely@linaro.org>
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
> ---
> Documentation/devicetree/bindings/misc/sram.txt | 33 +++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
> index 4d0a00e..2d83758 100644
> --- a/Documentation/devicetree/bindings/misc/sram.txt
> +++ b/Documentation/devicetree/bindings/misc/sram.txt
> @@ -8,9 +8,42 @@ Required properties:
>
> - reg : SRAM iomem address range
>
> +Reserving sram areas:
> +---------------------
> +
> +Each child of the sram node specifies a region of reserved memory. Each
> +child node should use a 'reg' property to specify a specific range of
> +reserved memory.
> +
> +Following the generic-names recommended practice, node names should
> +reflect the purpose of the node. Unit address (@<address>) should be
> +appended to the name.
> +
> +Required properties in the sram node:
> +
> +- #address-cells, #size-cells : should use the same values as the root node
> +- ranges : standard definition, should be empty
I think we should rather define the 'ranges' property to translate from
addresses within the sram to bus addresses.
> +Required properties in the area nodes:
> +
> +- reg : iomem address range
> +
> +Optional properties in the area nodes:
> +
> +- compatible : standard definition
> +
Is this enough? Normally we should define a list of "compatible" strings
that people can add to, but not have an anything-allowed option.
> Example:
>
> sram: sram@5c000000 {
> compatible = "mmio-sram";
> reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> +
> + #adress-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + smp-sram@5c000100 {
> + compatible = "socvendor,smp-sram";
> + reg = <0x5c000100 0x50>;
> + };
> };
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-25 13:19 ` Arnd Bergmann
0 siblings, 0 replies; 33+ messages in thread
From: Arnd Bergmann @ 2014-02-25 13:19 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 25 February 2014, Heiko St?bner wrote:
> Some SoCs need parts of their sram for special purposes. So while being part
> of the peripheral, it should not be part of the genpool controlling the sram.
>
> Therefore add the option to define reserved regions as subnodes of the
> sram-node similar to defining reserved global memory regions.
[adding Sachin Kamat to Cc, he just had the same issue]
> Originally
> Suggested-by: Rob Herring <robherring2@gmail.com>
>
> Using subnodes for reserved regions
> Suggested-by: Grant Likely <grant.likely@linaro.org>
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
> ---
> Documentation/devicetree/bindings/misc/sram.txt | 33 +++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
> index 4d0a00e..2d83758 100644
> --- a/Documentation/devicetree/bindings/misc/sram.txt
> +++ b/Documentation/devicetree/bindings/misc/sram.txt
> @@ -8,9 +8,42 @@ Required properties:
>
> - reg : SRAM iomem address range
>
> +Reserving sram areas:
> +---------------------
> +
> +Each child of the sram node specifies a region of reserved memory. Each
> +child node should use a 'reg' property to specify a specific range of
> +reserved memory.
> +
> +Following the generic-names recommended practice, node names should
> +reflect the purpose of the node. Unit address (@<address>) should be
> +appended to the name.
> +
> +Required properties in the sram node:
> +
> +- #address-cells, #size-cells : should use the same values as the root node
> +- ranges : standard definition, should be empty
I think we should rather define the 'ranges' property to translate from
addresses within the sram to bus addresses.
> +Required properties in the area nodes:
> +
> +- reg : iomem address range
> +
> +Optional properties in the area nodes:
> +
> +- compatible : standard definition
> +
Is this enough? Normally we should define a list of "compatible" strings
that people can add to, but not have an anything-allowed option.
> Example:
>
> sram: sram at 5c000000 {
> compatible = "mmio-sram";
> reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> +
> + #adress-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + smp-sram at 5c000100 {
> + compatible = "socvendor,smp-sram";
> + reg = <0x5c000100 0x50>;
> + };
> };
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v8 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-25 13:19 ` Arnd Bergmann
0 siblings, 0 replies; 33+ messages in thread
From: Arnd Bergmann @ 2014-02-25 13:19 UTC (permalink / raw)
To: Heiko Stübner
Cc: Mark Rutland, devicetree, Pawel Moll, Stephen Warren,
Sachin Kamat, Greg Kroah-Hartman, Ian Campbell, linux-kernel,
arm, Philipp Zabel, Grant Likely, linux-arm-kernel
On Tuesday 25 February 2014, Heiko Stübner wrote:
> Some SoCs need parts of their sram for special purposes. So while being part
> of the peripheral, it should not be part of the genpool controlling the sram.
>
> Therefore add the option to define reserved regions as subnodes of the
> sram-node similar to defining reserved global memory regions.
[adding Sachin Kamat to Cc, he just had the same issue]
> Originally
> Suggested-by: Rob Herring <robherring2@gmail.com>
>
> Using subnodes for reserved regions
> Suggested-by: Grant Likely <grant.likely@linaro.org>
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
> ---
> Documentation/devicetree/bindings/misc/sram.txt | 33 +++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
> index 4d0a00e..2d83758 100644
> --- a/Documentation/devicetree/bindings/misc/sram.txt
> +++ b/Documentation/devicetree/bindings/misc/sram.txt
> @@ -8,9 +8,42 @@ Required properties:
>
> - reg : SRAM iomem address range
>
> +Reserving sram areas:
> +---------------------
> +
> +Each child of the sram node specifies a region of reserved memory. Each
> +child node should use a 'reg' property to specify a specific range of
> +reserved memory.
> +
> +Following the generic-names recommended practice, node names should
> +reflect the purpose of the node. Unit address (@<address>) should be
> +appended to the name.
> +
> +Required properties in the sram node:
> +
> +- #address-cells, #size-cells : should use the same values as the root node
> +- ranges : standard definition, should be empty
I think we should rather define the 'ranges' property to translate from
addresses within the sram to bus addresses.
> +Required properties in the area nodes:
> +
> +- reg : iomem address range
> +
> +Optional properties in the area nodes:
> +
> +- compatible : standard definition
> +
Is this enough? Normally we should define a list of "compatible" strings
that people can add to, but not have an anything-allowed option.
> Example:
>
> sram: sram@5c000000 {
> compatible = "mmio-sram";
> reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> +
> + #adress-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + smp-sram@5c000100 {
> + compatible = "socvendor,smp-sram";
> + reg = <0x5c000100 0x50>;
> + };
> };
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-26 22:02 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-26 22:02 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, arm, Grant Likely, Rob Herring, devicetree,
Philipp Zabel, linux-kernel, Greg Kroah-Hartman, Pawel Moll,
Mark Rutland, Stephen Warren, Ian Campbell, Sachin Kamat
Some SoCs need parts of their sram for special purposes. So while being part
of the peripheral, it should not be part of the genpool controlling the sram.
Therefore add the option to define reserved regions as subnodes of the
sram-node similar to defining reserved global memory regions.
Originally
Suggested-by: Rob Herring <robherring2@gmail.com>
Using subnodes for reserved regions
Suggested-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Hi Arnd,
I've changed the range definition as suggested. I've also changed my
rockchip dt-files accordingly, but will wait with respinning the whole
series until the direction with this binding is a bit safer.
I've also amended the "compatible"-property for the subnodes. It now
mimics the text from the generic reserved memory nodes [0],
which got no complaints from the DT maintainers.
Heiko
[0] https://lkml.org/lkml/2014/2/4/172
Documentation/devicetree/bindings/misc/sram.txt | 35 +++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e..36cbe5a 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,44 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should translate from local addresses
+ within the sram to bus addresses
+
+Required properties in the area nodes:
+
+- reg : iomem address range, relative to the SRAM range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition, should contain a vendor specific string
+ in the form <vendor>,[<device>-]<usage>
+
Example:
sram: sram@5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5c000000 0x40000>;
+
+ smp-sram@100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x100 0x50>;
+ };
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-26 22:02 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-26 22:02 UTC (permalink / raw)
To: linux-arm-kernel
Some SoCs need parts of their sram for special purposes. So while being part
of the peripheral, it should not be part of the genpool controlling the sram.
Therefore add the option to define reserved regions as subnodes of the
sram-node similar to defining reserved global memory regions.
Originally
Suggested-by: Rob Herring <robherring2@gmail.com>
Using subnodes for reserved regions
Suggested-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Hi Arnd,
I've changed the range definition as suggested. I've also changed my
rockchip dt-files accordingly, but will wait with respinning the whole
series until the direction with this binding is a bit safer.
I've also amended the "compatible"-property for the subnodes. It now
mimics the text from the generic reserved memory nodes [0],
which got no complaints from the DT maintainers.
Heiko
[0] https://lkml.org/lkml/2014/2/4/172
Documentation/devicetree/bindings/misc/sram.txt | 35 +++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e..36cbe5a 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,44 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should translate from local addresses
+ within the sram to bus addresses
+
+Required properties in the area nodes:
+
+- reg : iomem address range, relative to the SRAM range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition, should contain a vendor specific string
+ in the form <vendor>,[<device>-]<usage>
+
Example:
sram: sram at 5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5c000000 0x40000>;
+
+ smp-sram at 100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x100 0x50>;
+ };
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-26 22:02 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-26 22:02 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
arm-DgEjT+Ai2ygdnm+yROfE0A, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell,
Sachin Kamat
Some SoCs need parts of their sram for special purposes. So while being part
of the peripheral, it should not be part of the genpool controlling the sram.
Therefore add the option to define reserved regions as subnodes of the
sram-node similar to defining reserved global memory regions.
Originally
Suggested-by: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Using subnodes for reserved regions
Suggested-by: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Tested-by: Ulrich Prinz <ulrich.prinz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
Hi Arnd,
I've changed the range definition as suggested. I've also changed my
rockchip dt-files accordingly, but will wait with respinning the whole
series until the direction with this binding is a bit safer.
I've also amended the "compatible"-property for the subnodes. It now
mimics the text from the generic reserved memory nodes [0],
which got no complaints from the DT maintainers.
Heiko
[0] https://lkml.org/lkml/2014/2/4/172
Documentation/devicetree/bindings/misc/sram.txt | 35 +++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e..36cbe5a 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,44 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should translate from local addresses
+ within the sram to bus addresses
+
+Required properties in the area nodes:
+
+- reg : iomem address range, relative to the SRAM range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition, should contain a vendor specific string
+ in the form <vendor>,[<device>-]<usage>
+
Example:
sram: sram@5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5c000000 0x40000>;
+
+ smp-sram@100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x100 0x50>;
+ };
};
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 33+ messages in thread* Re: [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory
2014-02-26 22:02 ` Heiko Stübner
(?)
@ 2014-02-27 19:16 ` Arnd Bergmann
-1 siblings, 0 replies; 33+ messages in thread
From: Arnd Bergmann @ 2014-02-27 19:16 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-arm-kernel, arm, Grant Likely, Rob Herring, devicetree,
Philipp Zabel, linux-kernel, Greg Kroah-Hartman, Pawel Moll,
Mark Rutland, Stephen Warren, Ian Campbell, Sachin Kamat
On Wednesday 26 February 2014, Heiko Stübner wrote:
> Some SoCs need parts of their sram for special purposes. So while being part
> of the peripheral, it should not be part of the genpool controlling the sram.
>
> Therefore add the option to define reserved regions as subnodes of the
> sram-node similar to defining reserved global memory regions.
>
> Originally
> Suggested-by: Rob Herring <robherring2@gmail.com>
>
> Using subnodes for reserved regions
> Suggested-by: Grant Likely <grant.likely@linaro.org>
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-27 19:16 ` Arnd Bergmann
0 siblings, 0 replies; 33+ messages in thread
From: Arnd Bergmann @ 2014-02-27 19:16 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 26 February 2014, Heiko St?bner wrote:
> Some SoCs need parts of their sram for special purposes. So while being part
> of the peripheral, it should not be part of the genpool controlling the sram.
>
> Therefore add the option to define reserved regions as subnodes of the
> sram-node similar to defining reserved global memory regions.
>
> Originally
> Suggested-by: Rob Herring <robherring2@gmail.com>
>
> Using subnodes for reserved regions
> Suggested-by: Grant Likely <grant.likely@linaro.org>
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v8.1 1/6] dt-bindings: sram: describe option to reserve parts of the memory
@ 2014-02-27 19:16 ` Arnd Bergmann
0 siblings, 0 replies; 33+ messages in thread
From: Arnd Bergmann @ 2014-02-27 19:16 UTC (permalink / raw)
To: Heiko Stübner
Cc: Mark Rutland, devicetree, Pawel Moll, Stephen Warren,
Sachin Kamat, Greg Kroah-Hartman, Ian Campbell, linux-kernel,
arm, Philipp Zabel, Grant Likely, linux-arm-kernel
On Wednesday 26 February 2014, Heiko Stübner wrote:
> Some SoCs need parts of their sram for special purposes. So while being part
> of the peripheral, it should not be part of the genpool controlling the sram.
>
> Therefore add the option to define reserved regions as subnodes of the
> sram-node similar to defining reserved global memory regions.
>
> Originally
> Suggested-by: Rob Herring <robherring2@gmail.com>
>
> Using subnodes for reserved regions
> Suggested-by: Grant Likely <grant.likely@linaro.org>
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v8 2/6] misc: sram: implement reserved sram areas
2014-02-25 11:44 ` Heiko Stübner
(?)
@ 2014-02-25 11:46 ` Heiko Stübner
-1 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:46 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
This implements support for defining reserved areas as subnodes,
to keep the genpool from using these.
Suggested-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
drivers/misc/sram.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 118 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index afe66571..674b0cd 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -24,6 +24,9 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -36,14 +39,35 @@ struct sram_dev {
struct clk *clk;
};
+struct sram_reserve {
+ struct list_head list;
+ u32 start;
+ u32 size;
+};
+
+static int sram_reserve_cmp(void *priv, struct list_head *a,
+ struct list_head *b)
+{
+ struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
+ struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
+
+ return ra->start - rb->start;
+}
+
static int sram_probe(struct platform_device *pdev)
{
void __iomem *virt_base;
struct sram_dev *sram;
struct resource *res;
- unsigned long size;
+ struct device_node *np = pdev->dev.of_node, *child;
+ unsigned long size, cur_start, cur_size;
+ struct sram_reserve *rblocks, *block;
+ struct list_head reserve_list;
+ unsigned int nblocks;
int ret;
+ INIT_LIST_HEAD(&reserve_list);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
virt_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(virt_base))
@@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
if (!sram->pool)
return -ENOMEM;
- ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
- res->start, size, -1);
- if (ret < 0) {
- if (sram->clk)
- clk_disable_unprepare(sram->clk);
- return ret;
+ /*
+ * We need an additional block to mark the end of the memory region
+ * after the reserved blocks from the dt are processed.
+ */
+ nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
+ rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
+ if (!rblocks) {
+ ret = -ENOMEM;
+ goto err_alloc;
}
+ block = &rblocks[0];
+ for_each_available_child_of_node(np, child) {
+ struct resource child_res;
+
+ ret = of_address_to_resource(child, 0, &child_res);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "could not get address for node %s\n",
+ child->full_name);
+ goto err_chunks;
+ }
+
+ if (child_res.start < res->start || child_res.end > res->end) {
+ dev_err(&pdev->dev,
+ "reserved block %s outside the sram area\n",
+ child->full_name);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ block->start = child_res.start - res->start;
+ block->size = resource_size(&child_res);
+ list_add_tail(&block->list, &reserve_list);
+
+ dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
+ block->start,
+ block->start + block->size);
+
+ block++;
+ }
+
+ /* the last chunk marks the end of the region */
+ rblocks[nblocks - 1].start = size;
+ rblocks[nblocks - 1].size = 0;
+ list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
+
+ list_sort(NULL, &reserve_list, sram_reserve_cmp);
+
+ cur_start = 0;
+
+ list_for_each_entry(block, &reserve_list, list) {
+ /* can only happen if sections overlap */
+ if (block->start < cur_start) {
+ dev_err(&pdev->dev,
+ "block at 0x%x starts after current offset 0x%lx\n",
+ block->start, cur_start);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ /* current start is in a reserved block, so continue after it */
+ if (block->start == cur_start) {
+ cur_start = block->start + block->size;
+ continue;
+ }
+
+ /*
+ * allocate the space between the current starting
+ * address and the following reserved block, or the
+ * end of the region.
+ */
+ cur_size = block->start - cur_start;
+
+ dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
+ cur_start, cur_start + cur_size);
+ ret = gen_pool_add_virt(sram->pool,
+ (unsigned long)virt_base + cur_start,
+ res->start + cur_start, cur_size, -1);
+ if (ret < 0)
+ goto err_chunks;
+
+ /* next allocation after this reserved block */
+ cur_start = block->start + block->size;
+ }
+
+ kfree(rblocks);
+
platform_set_drvdata(pdev, sram);
dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
return 0;
+
+err_chunks:
+ kfree(rblocks);
+err_alloc:
+ if (sram->clk)
+ clk_disable_unprepare(sram->clk);
+ return ret;
}
static int sram_remove(struct platform_device *pdev)
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 2/6] misc: sram: implement reserved sram areas
@ 2014-02-25 11:46 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:46 UTC (permalink / raw)
To: linux-arm-kernel
This implements support for defining reserved areas as subnodes,
to keep the genpool from using these.
Suggested-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
drivers/misc/sram.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 118 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index afe66571..674b0cd 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -24,6 +24,9 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -36,14 +39,35 @@ struct sram_dev {
struct clk *clk;
};
+struct sram_reserve {
+ struct list_head list;
+ u32 start;
+ u32 size;
+};
+
+static int sram_reserve_cmp(void *priv, struct list_head *a,
+ struct list_head *b)
+{
+ struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
+ struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
+
+ return ra->start - rb->start;
+}
+
static int sram_probe(struct platform_device *pdev)
{
void __iomem *virt_base;
struct sram_dev *sram;
struct resource *res;
- unsigned long size;
+ struct device_node *np = pdev->dev.of_node, *child;
+ unsigned long size, cur_start, cur_size;
+ struct sram_reserve *rblocks, *block;
+ struct list_head reserve_list;
+ unsigned int nblocks;
int ret;
+ INIT_LIST_HEAD(&reserve_list);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
virt_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(virt_base))
@@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
if (!sram->pool)
return -ENOMEM;
- ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
- res->start, size, -1);
- if (ret < 0) {
- if (sram->clk)
- clk_disable_unprepare(sram->clk);
- return ret;
+ /*
+ * We need an additional block to mark the end of the memory region
+ * after the reserved blocks from the dt are processed.
+ */
+ nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
+ rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
+ if (!rblocks) {
+ ret = -ENOMEM;
+ goto err_alloc;
}
+ block = &rblocks[0];
+ for_each_available_child_of_node(np, child) {
+ struct resource child_res;
+
+ ret = of_address_to_resource(child, 0, &child_res);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "could not get address for node %s\n",
+ child->full_name);
+ goto err_chunks;
+ }
+
+ if (child_res.start < res->start || child_res.end > res->end) {
+ dev_err(&pdev->dev,
+ "reserved block %s outside the sram area\n",
+ child->full_name);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ block->start = child_res.start - res->start;
+ block->size = resource_size(&child_res);
+ list_add_tail(&block->list, &reserve_list);
+
+ dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
+ block->start,
+ block->start + block->size);
+
+ block++;
+ }
+
+ /* the last chunk marks the end of the region */
+ rblocks[nblocks - 1].start = size;
+ rblocks[nblocks - 1].size = 0;
+ list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
+
+ list_sort(NULL, &reserve_list, sram_reserve_cmp);
+
+ cur_start = 0;
+
+ list_for_each_entry(block, &reserve_list, list) {
+ /* can only happen if sections overlap */
+ if (block->start < cur_start) {
+ dev_err(&pdev->dev,
+ "block at 0x%x starts after current offset 0x%lx\n",
+ block->start, cur_start);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ /* current start is in a reserved block, so continue after it */
+ if (block->start == cur_start) {
+ cur_start = block->start + block->size;
+ continue;
+ }
+
+ /*
+ * allocate the space between the current starting
+ * address and the following reserved block, or the
+ * end of the region.
+ */
+ cur_size = block->start - cur_start;
+
+ dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
+ cur_start, cur_start + cur_size);
+ ret = gen_pool_add_virt(sram->pool,
+ (unsigned long)virt_base + cur_start,
+ res->start + cur_start, cur_size, -1);
+ if (ret < 0)
+ goto err_chunks;
+
+ /* next allocation after this reserved block */
+ cur_start = block->start + block->size;
+ }
+
+ kfree(rblocks);
+
platform_set_drvdata(pdev, sram);
dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
return 0;
+
+err_chunks:
+ kfree(rblocks);
+err_alloc:
+ if (sram->clk)
+ clk_disable_unprepare(sram->clk);
+ return ret;
}
static int sram_remove(struct platform_device *pdev)
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 2/6] misc: sram: implement reserved sram areas
@ 2014-02-25 11:46 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:46 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: arm-DgEjT+Ai2ygdnm+yROfE0A, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell
This implements support for defining reserved areas as subnodes,
to keep the genpool from using these.
Suggested-by: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Tested-by: Ulrich Prinz <ulrich.prinz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
drivers/misc/sram.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 118 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index afe66571..674b0cd 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -24,6 +24,9 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -36,14 +39,35 @@ struct sram_dev {
struct clk *clk;
};
+struct sram_reserve {
+ struct list_head list;
+ u32 start;
+ u32 size;
+};
+
+static int sram_reserve_cmp(void *priv, struct list_head *a,
+ struct list_head *b)
+{
+ struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
+ struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
+
+ return ra->start - rb->start;
+}
+
static int sram_probe(struct platform_device *pdev)
{
void __iomem *virt_base;
struct sram_dev *sram;
struct resource *res;
- unsigned long size;
+ struct device_node *np = pdev->dev.of_node, *child;
+ unsigned long size, cur_start, cur_size;
+ struct sram_reserve *rblocks, *block;
+ struct list_head reserve_list;
+ unsigned int nblocks;
int ret;
+ INIT_LIST_HEAD(&reserve_list);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
virt_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(virt_base))
@@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
if (!sram->pool)
return -ENOMEM;
- ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
- res->start, size, -1);
- if (ret < 0) {
- if (sram->clk)
- clk_disable_unprepare(sram->clk);
- return ret;
+ /*
+ * We need an additional block to mark the end of the memory region
+ * after the reserved blocks from the dt are processed.
+ */
+ nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
+ rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
+ if (!rblocks) {
+ ret = -ENOMEM;
+ goto err_alloc;
}
+ block = &rblocks[0];
+ for_each_available_child_of_node(np, child) {
+ struct resource child_res;
+
+ ret = of_address_to_resource(child, 0, &child_res);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "could not get address for node %s\n",
+ child->full_name);
+ goto err_chunks;
+ }
+
+ if (child_res.start < res->start || child_res.end > res->end) {
+ dev_err(&pdev->dev,
+ "reserved block %s outside the sram area\n",
+ child->full_name);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ block->start = child_res.start - res->start;
+ block->size = resource_size(&child_res);
+ list_add_tail(&block->list, &reserve_list);
+
+ dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
+ block->start,
+ block->start + block->size);
+
+ block++;
+ }
+
+ /* the last chunk marks the end of the region */
+ rblocks[nblocks - 1].start = size;
+ rblocks[nblocks - 1].size = 0;
+ list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
+
+ list_sort(NULL, &reserve_list, sram_reserve_cmp);
+
+ cur_start = 0;
+
+ list_for_each_entry(block, &reserve_list, list) {
+ /* can only happen if sections overlap */
+ if (block->start < cur_start) {
+ dev_err(&pdev->dev,
+ "block at 0x%x starts after current offset 0x%lx\n",
+ block->start, cur_start);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ /* current start is in a reserved block, so continue after it */
+ if (block->start == cur_start) {
+ cur_start = block->start + block->size;
+ continue;
+ }
+
+ /*
+ * allocate the space between the current starting
+ * address and the following reserved block, or the
+ * end of the region.
+ */
+ cur_size = block->start - cur_start;
+
+ dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
+ cur_start, cur_start + cur_size);
+ ret = gen_pool_add_virt(sram->pool,
+ (unsigned long)virt_base + cur_start,
+ res->start + cur_start, cur_size, -1);
+ if (ret < 0)
+ goto err_chunks;
+
+ /* next allocation after this reserved block */
+ cur_start = block->start + block->size;
+ }
+
+ kfree(rblocks);
+
platform_set_drvdata(pdev, sram);
dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
return 0;
+
+err_chunks:
+ kfree(rblocks);
+err_alloc:
+ if (sram->clk)
+ clk_disable_unprepare(sram->clk);
+ return ret;
}
static int sram_remove(struct platform_device *pdev)
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 33+ messages in thread* Re: [PATCH v8 2/6] misc: sram: implement reserved sram areas
2014-02-25 11:46 ` Heiko Stübner
(?)
@ 2014-03-03 11:29 ` Philipp Zabel
-1 siblings, 0 replies; 33+ messages in thread
From: Philipp Zabel @ 2014-03-03 11:29 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-arm-kernel, arm, Grant Likely, Rob Herring, devicetree,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
Hi Heiko,
Am Dienstag, den 25.02.2014, 12:46 +0100 schrieb Heiko Stübner:
> This implements support for defining reserved areas as subnodes,
> to keep the genpool from using these.
>
> Suggested-by: Rob Herring <robherring2@gmail.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> drivers/misc/sram.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 118 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
> index afe66571..674b0cd 100644
> --- a/drivers/misc/sram.c
> +++ b/drivers/misc/sram.c
> @@ -24,6 +24,9 @@
> #include <linux/err.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/list.h>
> +#include <linux/list_sort.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> @@ -36,14 +39,35 @@ struct sram_dev {
> struct clk *clk;
> };
>
> +struct sram_reserve {
> + struct list_head list;
> + u32 start;
> + u32 size;
> +};
> +
> +static int sram_reserve_cmp(void *priv, struct list_head *a,
> + struct list_head *b)
> +{
> + struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
> + struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
> +
> + return ra->start - rb->start;
> +}
> +
> static int sram_probe(struct platform_device *pdev)
> {
> void __iomem *virt_base;
> struct sram_dev *sram;
> struct resource *res;
> - unsigned long size;
> + struct device_node *np = pdev->dev.of_node, *child;
> + unsigned long size, cur_start, cur_size;
> + struct sram_reserve *rblocks, *block;
> + struct list_head reserve_list;
> + unsigned int nblocks;
> int ret;
>
> + INIT_LIST_HEAD(&reserve_list);
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> virt_base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(virt_base))
> @@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
> if (!sram->pool)
> return -ENOMEM;
>
> - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
> - res->start, size, -1);
> - if (ret < 0) {
> - if (sram->clk)
> - clk_disable_unprepare(sram->clk);
> - return ret;
> + /*
> + * We need an additional block to mark the end of the memory region
> + * after the reserved blocks from the dt are processed.
> + */
> + nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
> + rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
> + if (!rblocks) {
> + ret = -ENOMEM;
> + goto err_alloc;
> }
>
> + block = &rblocks[0];
> + for_each_available_child_of_node(np, child) {
> + struct resource child_res;
> +
> + ret = of_address_to_resource(child, 0, &child_res);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "could not get address for node %s\n",
> + child->full_name);
> + goto err_chunks;
> + }
> +
> + if (child_res.start < res->start || child_res.end > res->end) {
> + dev_err(&pdev->dev,
> + "reserved block %s outside the sram area\n",
> + child->full_name);
> + ret = -EINVAL;
> + goto err_chunks;
> + }
> +
> + block->start = child_res.start - res->start;
> + block->size = resource_size(&child_res);
> + list_add_tail(&block->list, &reserve_list);
> +
> + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
> + block->start,
> + block->start + block->size);
> +
> + block++;
> + }
> +
> + /* the last chunk marks the end of the region */
> + rblocks[nblocks - 1].start = size;
> + rblocks[nblocks - 1].size = 0;
> + list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
> +
> + list_sort(NULL, &reserve_list, sram_reserve_cmp);
> +
> + cur_start = 0;
> +
> + list_for_each_entry(block, &reserve_list, list) {
> + /* can only happen if sections overlap */
> + if (block->start < cur_start) {
> + dev_err(&pdev->dev,
> + "block at 0x%x starts after current offset 0x%lx\n",
> + block->start, cur_start);
> + ret = -EINVAL;
> + goto err_chunks;
> + }
> +
> + /* current start is in a reserved block, so continue after it */
> + if (block->start == cur_start) {
> + cur_start = block->start + block->size;
> + continue;
> + }
> +
> + /*
> + * allocate the space between the current starting
> + * address and the following reserved block, or the
> + * end of the region.
> + */
> + cur_size = block->start - cur_start;
> +
> + dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
> + cur_start, cur_start + cur_size);
> + ret = gen_pool_add_virt(sram->pool,
> + (unsigned long)virt_base + cur_start,
> + res->start + cur_start, cur_size, -1);
> + if (ret < 0)
> + goto err_chunks;
> +
> + /* next allocation after this reserved block */
> + cur_start = block->start + block->size;
> + }
> +
> + kfree(rblocks);
> +
> platform_set_drvdata(pdev, sram);
>
> dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
>
> return 0;
> +
> +err_chunks:
> + kfree(rblocks);
> +err_alloc:
> + if (sram->clk)
> + clk_disable_unprepare(sram->clk);
> + return ret;
> }
>
> static int sram_remove(struct platform_device *pdev)
regards
Philipp
^ permalink raw reply [flat|nested] 33+ messages in thread* [PATCH v8 2/6] misc: sram: implement reserved sram areas
@ 2014-03-03 11:29 ` Philipp Zabel
0 siblings, 0 replies; 33+ messages in thread
From: Philipp Zabel @ 2014-03-03 11:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Heiko,
Am Dienstag, den 25.02.2014, 12:46 +0100 schrieb Heiko St?bner:
> This implements support for defining reserved areas as subnodes,
> to keep the genpool from using these.
>
> Suggested-by: Rob Herring <robherring2@gmail.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> drivers/misc/sram.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 118 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
> index afe66571..674b0cd 100644
> --- a/drivers/misc/sram.c
> +++ b/drivers/misc/sram.c
> @@ -24,6 +24,9 @@
> #include <linux/err.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/list.h>
> +#include <linux/list_sort.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> @@ -36,14 +39,35 @@ struct sram_dev {
> struct clk *clk;
> };
>
> +struct sram_reserve {
> + struct list_head list;
> + u32 start;
> + u32 size;
> +};
> +
> +static int sram_reserve_cmp(void *priv, struct list_head *a,
> + struct list_head *b)
> +{
> + struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
> + struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
> +
> + return ra->start - rb->start;
> +}
> +
> static int sram_probe(struct platform_device *pdev)
> {
> void __iomem *virt_base;
> struct sram_dev *sram;
> struct resource *res;
> - unsigned long size;
> + struct device_node *np = pdev->dev.of_node, *child;
> + unsigned long size, cur_start, cur_size;
> + struct sram_reserve *rblocks, *block;
> + struct list_head reserve_list;
> + unsigned int nblocks;
> int ret;
>
> + INIT_LIST_HEAD(&reserve_list);
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> virt_base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(virt_base))
> @@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
> if (!sram->pool)
> return -ENOMEM;
>
> - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
> - res->start, size, -1);
> - if (ret < 0) {
> - if (sram->clk)
> - clk_disable_unprepare(sram->clk);
> - return ret;
> + /*
> + * We need an additional block to mark the end of the memory region
> + * after the reserved blocks from the dt are processed.
> + */
> + nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
> + rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
> + if (!rblocks) {
> + ret = -ENOMEM;
> + goto err_alloc;
> }
>
> + block = &rblocks[0];
> + for_each_available_child_of_node(np, child) {
> + struct resource child_res;
> +
> + ret = of_address_to_resource(child, 0, &child_res);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "could not get address for node %s\n",
> + child->full_name);
> + goto err_chunks;
> + }
> +
> + if (child_res.start < res->start || child_res.end > res->end) {
> + dev_err(&pdev->dev,
> + "reserved block %s outside the sram area\n",
> + child->full_name);
> + ret = -EINVAL;
> + goto err_chunks;
> + }
> +
> + block->start = child_res.start - res->start;
> + block->size = resource_size(&child_res);
> + list_add_tail(&block->list, &reserve_list);
> +
> + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
> + block->start,
> + block->start + block->size);
> +
> + block++;
> + }
> +
> + /* the last chunk marks the end of the region */
> + rblocks[nblocks - 1].start = size;
> + rblocks[nblocks - 1].size = 0;
> + list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
> +
> + list_sort(NULL, &reserve_list, sram_reserve_cmp);
> +
> + cur_start = 0;
> +
> + list_for_each_entry(block, &reserve_list, list) {
> + /* can only happen if sections overlap */
> + if (block->start < cur_start) {
> + dev_err(&pdev->dev,
> + "block at 0x%x starts after current offset 0x%lx\n",
> + block->start, cur_start);
> + ret = -EINVAL;
> + goto err_chunks;
> + }
> +
> + /* current start is in a reserved block, so continue after it */
> + if (block->start == cur_start) {
> + cur_start = block->start + block->size;
> + continue;
> + }
> +
> + /*
> + * allocate the space between the current starting
> + * address and the following reserved block, or the
> + * end of the region.
> + */
> + cur_size = block->start - cur_start;
> +
> + dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
> + cur_start, cur_start + cur_size);
> + ret = gen_pool_add_virt(sram->pool,
> + (unsigned long)virt_base + cur_start,
> + res->start + cur_start, cur_size, -1);
> + if (ret < 0)
> + goto err_chunks;
> +
> + /* next allocation after this reserved block */
> + cur_start = block->start + block->size;
> + }
> +
> + kfree(rblocks);
> +
> platform_set_drvdata(pdev, sram);
>
> dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
>
> return 0;
> +
> +err_chunks:
> + kfree(rblocks);
> +err_alloc:
> + if (sram->clk)
> + clk_disable_unprepare(sram->clk);
> + return ret;
> }
>
> static int sram_remove(struct platform_device *pdev)
regards
Philipp
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH v8 2/6] misc: sram: implement reserved sram areas
@ 2014-03-03 11:29 ` Philipp Zabel
0 siblings, 0 replies; 33+ messages in thread
From: Philipp Zabel @ 2014-03-03 11:29 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
arm-DgEjT+Ai2ygdnm+yROfE0A, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell
Hi Heiko,
Am Dienstag, den 25.02.2014, 12:46 +0100 schrieb Heiko Stübner:
> This implements support for defining reserved areas as subnodes,
> to keep the genpool from using these.
>
> Suggested-by: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
> Tested-by: Ulrich Prinz <ulrich.prinz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Acked-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> ---
> drivers/misc/sram.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 118 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
> index afe66571..674b0cd 100644
> --- a/drivers/misc/sram.c
> +++ b/drivers/misc/sram.c
> @@ -24,6 +24,9 @@
> #include <linux/err.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/list.h>
> +#include <linux/list_sort.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> @@ -36,14 +39,35 @@ struct sram_dev {
> struct clk *clk;
> };
>
> +struct sram_reserve {
> + struct list_head list;
> + u32 start;
> + u32 size;
> +};
> +
> +static int sram_reserve_cmp(void *priv, struct list_head *a,
> + struct list_head *b)
> +{
> + struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
> + struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
> +
> + return ra->start - rb->start;
> +}
> +
> static int sram_probe(struct platform_device *pdev)
> {
> void __iomem *virt_base;
> struct sram_dev *sram;
> struct resource *res;
> - unsigned long size;
> + struct device_node *np = pdev->dev.of_node, *child;
> + unsigned long size, cur_start, cur_size;
> + struct sram_reserve *rblocks, *block;
> + struct list_head reserve_list;
> + unsigned int nblocks;
> int ret;
>
> + INIT_LIST_HEAD(&reserve_list);
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> virt_base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(virt_base))
> @@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
> if (!sram->pool)
> return -ENOMEM;
>
> - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
> - res->start, size, -1);
> - if (ret < 0) {
> - if (sram->clk)
> - clk_disable_unprepare(sram->clk);
> - return ret;
> + /*
> + * We need an additional block to mark the end of the memory region
> + * after the reserved blocks from the dt are processed.
> + */
> + nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
> + rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
> + if (!rblocks) {
> + ret = -ENOMEM;
> + goto err_alloc;
> }
>
> + block = &rblocks[0];
> + for_each_available_child_of_node(np, child) {
> + struct resource child_res;
> +
> + ret = of_address_to_resource(child, 0, &child_res);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "could not get address for node %s\n",
> + child->full_name);
> + goto err_chunks;
> + }
> +
> + if (child_res.start < res->start || child_res.end > res->end) {
> + dev_err(&pdev->dev,
> + "reserved block %s outside the sram area\n",
> + child->full_name);
> + ret = -EINVAL;
> + goto err_chunks;
> + }
> +
> + block->start = child_res.start - res->start;
> + block->size = resource_size(&child_res);
> + list_add_tail(&block->list, &reserve_list);
> +
> + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
> + block->start,
> + block->start + block->size);
> +
> + block++;
> + }
> +
> + /* the last chunk marks the end of the region */
> + rblocks[nblocks - 1].start = size;
> + rblocks[nblocks - 1].size = 0;
> + list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
> +
> + list_sort(NULL, &reserve_list, sram_reserve_cmp);
> +
> + cur_start = 0;
> +
> + list_for_each_entry(block, &reserve_list, list) {
> + /* can only happen if sections overlap */
> + if (block->start < cur_start) {
> + dev_err(&pdev->dev,
> + "block at 0x%x starts after current offset 0x%lx\n",
> + block->start, cur_start);
> + ret = -EINVAL;
> + goto err_chunks;
> + }
> +
> + /* current start is in a reserved block, so continue after it */
> + if (block->start == cur_start) {
> + cur_start = block->start + block->size;
> + continue;
> + }
> +
> + /*
> + * allocate the space between the current starting
> + * address and the following reserved block, or the
> + * end of the region.
> + */
> + cur_size = block->start - cur_start;
> +
> + dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
> + cur_start, cur_start + cur_size);
> + ret = gen_pool_add_virt(sram->pool,
> + (unsigned long)virt_base + cur_start,
> + res->start + cur_start, cur_size, -1);
> + if (ret < 0)
> + goto err_chunks;
> +
> + /* next allocation after this reserved block */
> + cur_start = block->start + block->size;
> + }
> +
> + kfree(rblocks);
> +
> platform_set_drvdata(pdev, sram);
>
> dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
>
> return 0;
> +
> +err_chunks:
> + kfree(rblocks);
> +err_alloc:
> + if (sram->clk)
> + clk_disable_unprepare(sram->clk);
> + return ret;
> }
>
> static int sram_remove(struct platform_device *pdev)
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v8 3/6] ARM: rockchip: add snoop-control-unit
2014-02-25 11:44 ` Heiko Stübner
(?)
@ 2014-02-25 11:47 ` Heiko Stübner
-1 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
This adds the device-node and config select to enable the
scu in all Rockchip Cortex-A9 SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
arch/arm/boot/dts/rk3xxx.dtsi | 5 +++++
arch/arm/mach-rockchip/Kconfig | 1 +
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0fcbcfd..0a3d5b1 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,11 @@
compatible = "simple-bus";
ranges;
+ scu@1013c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1013c000 0x100>;
+ };
+
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index cf073de..133410e 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,6 +5,7 @@ config ARCH_ROCKCHIP
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select COMMON_CLK
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 3/6] ARM: rockchip: add snoop-control-unit
@ 2014-02-25 11:47 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:47 UTC (permalink / raw)
To: linux-arm-kernel
This adds the device-node and config select to enable the
scu in all Rockchip Cortex-A9 SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
arch/arm/boot/dts/rk3xxx.dtsi | 5 +++++
arch/arm/mach-rockchip/Kconfig | 1 +
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0fcbcfd..0a3d5b1 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,11 @@
compatible = "simple-bus";
ranges;
+ scu at 1013c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1013c000 0x100>;
+ };
+
gic: interrupt-controller at 1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index cf073de..133410e 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,6 +5,7 @@ config ARCH_ROCKCHIP
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select COMMON_CLK
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 3/6] ARM: rockchip: add snoop-control-unit
@ 2014-02-25 11:47 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
This adds the device-node and config select to enable the
scu in all Rockchip Cortex-A9 SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
arch/arm/boot/dts/rk3xxx.dtsi | 5 +++++
arch/arm/mach-rockchip/Kconfig | 1 +
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0fcbcfd..0a3d5b1 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,11 @@
compatible = "simple-bus";
ranges;
+ scu@1013c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1013c000 0x100>;
+ };
+
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index cf073de..133410e 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,6 +5,7 @@ config ARCH_ROCKCHIP
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select COMMON_CLK
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v8 4/6] ARM: rockchip: add sram dt nodes and documentation
2014-02-25 11:44 ` Heiko Stübner
(?)
@ 2014-02-25 11:47 ` Heiko Stübner
-1 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section
needed for smp bringup.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 ++++++++++++++++++++++
arch/arm/boot/dts/rk3066a.dtsi | 13 ++++++++++
arch/arm/boot/dts/rk3188.dtsi | 13 ++++++++++
3 files changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
new file mode 100644
index 0000000..d9416fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
@@ -0,0 +1,30 @@
+Rockchip SRAM for smp bringup:
+------------------------------
+
+Rockchip's smp-capable SoCs use the first part of the sram for the bringup
+of the cores. Once the core gets powered up it executes the code that is
+residing at the very beginning of the sram.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : should be "rockchip,rk3066-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index be5d2b0..37d0768 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -64,6 +64,19 @@
clock-names = "timer", "pclk";
};
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
+
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
reg = <0x20008000 0x150>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1a26b03..412f4d0 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -60,6 +60,19 @@
interrupts = <GIC_PPI 13 0xf04>;
};
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
+
pinctrl@20008000 {
compatible = "rockchip,rk3188-pinctrl";
reg = <0x20008000 0xa0>,
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 4/6] ARM: rockchip: add sram dt nodes and documentation
@ 2014-02-25 11:47 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section
needed for smp bringup.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 ++++++++++++++++++++++
arch/arm/boot/dts/rk3066a.dtsi | 13 ++++++++++
arch/arm/boot/dts/rk3188.dtsi | 13 ++++++++++
3 files changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
new file mode 100644
index 0000000..d9416fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
@@ -0,0 +1,30 @@
+Rockchip SRAM for smp bringup:
+------------------------------
+
+Rockchip's smp-capable SoCs use the first part of the sram for the bringup
+of the cores. Once the core gets powered up it executes the code that is
+residing at the very beginning of the sram.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : should be "rockchip,rk3066-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+ sram: sram at 10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram at 10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index be5d2b0..37d0768 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -64,6 +64,19 @@
clock-names = "timer", "pclk";
};
+ sram: sram at 10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram at 10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
+
pinctrl at 20008000 {
compatible = "rockchip,rk3066a-pinctrl";
reg = <0x20008000 0x150>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1a26b03..412f4d0 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -60,6 +60,19 @@
interrupts = <GIC_PPI 13 0xf04>;
};
+ sram: sram at 10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram at 10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
+
pinctrl at 20008000 {
compatible = "rockchip,rk3188-pinctrl";
reg = <0x20008000 0xa0>,
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 4/6] ARM: rockchip: add sram dt nodes and documentation
@ 2014-02-25 11:47 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:47 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: arm-DgEjT+Ai2ygdnm+yROfE0A, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section
needed for smp bringup.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Tested-by: Ulrich Prinz <ulrich.prinz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 ++++++++++++++++++++++
arch/arm/boot/dts/rk3066a.dtsi | 13 ++++++++++
arch/arm/boot/dts/rk3188.dtsi | 13 ++++++++++
3 files changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
new file mode 100644
index 0000000..d9416fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
@@ -0,0 +1,30 @@
+Rockchip SRAM for smp bringup:
+------------------------------
+
+Rockchip's smp-capable SoCs use the first part of the sram for the bringup
+of the cores. Once the core gets powered up it executes the code that is
+residing at the very beginning of the sram.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : should be "rockchip,rk3066-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index be5d2b0..37d0768 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -64,6 +64,19 @@
clock-names = "timer", "pclk";
};
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
+
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
reg = <0x20008000 0x150>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1a26b03..412f4d0 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -60,6 +60,19 @@
interrupts = <GIC_PPI 13 0xf04>;
};
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smp-sram@10080000 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x10080000 0x50>;
+ };
+ };
+
pinctrl@20008000 {
compatible = "rockchip,rk3188-pinctrl";
reg = <0x20008000 0xa0>,
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v8 5/6] ARM: rockchip: add power-management-unit
2014-02-25 11:44 ` Heiko Stübner
(?)
@ 2014-02-25 11:48 ` Heiko Stübner
-1 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:48 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
The pmu is needed to bring up the cores during smp operations and later
also other system parts. Therefore add a node and documentation for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Documentation/devicetree/bindings/arm/rockchip/pmu.txt | 16 ++++++++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 5 +++++
2 files changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
new file mode 100644
index 0000000..3ee9b42
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
@@ -0,0 +1,16 @@
+Rockchip power-management-unit:
+-------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : = "rockchip,rk3066-pmu";
+- reg : physical base address and the size of the registers window
+
+Example:
+
+ pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu";
+ reg = <0x20004000 0x100>;
+ };
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0a3d5b1..26e5a96 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -31,6 +31,11 @@
reg = <0x1013c000 0x100>;
};
+ pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu";
+ reg = <0x20004000 0x100>;
+ };
+
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 5/6] ARM: rockchip: add power-management-unit
@ 2014-02-25 11:48 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:48 UTC (permalink / raw)
To: linux-arm-kernel
The pmu is needed to bring up the cores during smp operations and later
also other system parts. Therefore add a node and documentation for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Documentation/devicetree/bindings/arm/rockchip/pmu.txt | 16 ++++++++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 5 +++++
2 files changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
new file mode 100644
index 0000000..3ee9b42
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
@@ -0,0 +1,16 @@
+Rockchip power-management-unit:
+-------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : = "rockchip,rk3066-pmu";
+- reg : physical base address and the size of the registers window
+
+Example:
+
+ pmu at 20004000 {
+ compatible = "rockchip,rk3066-pmu";
+ reg = <0x20004000 0x100>;
+ };
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0a3d5b1..26e5a96 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -31,6 +31,11 @@
reg = <0x1013c000 0x100>;
};
+ pmu at 20004000 {
+ compatible = "rockchip,rk3066-pmu";
+ reg = <0x20004000 0x100>;
+ };
+
gic: interrupt-controller at 1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 5/6] ARM: rockchip: add power-management-unit
@ 2014-02-25 11:48 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:48 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
The pmu is needed to bring up the cores during smp operations and later
also other system parts. Therefore add a node and documentation for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
Documentation/devicetree/bindings/arm/rockchip/pmu.txt | 16 ++++++++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 5 +++++
2 files changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
new file mode 100644
index 0000000..3ee9b42
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
@@ -0,0 +1,16 @@
+Rockchip power-management-unit:
+-------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : = "rockchip,rk3066-pmu";
+- reg : physical base address and the size of the registers window
+
+Example:
+
+ pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu";
+ reg = <0x20004000 0x100>;
+ };
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0a3d5b1..26e5a96 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -31,6 +31,11 @@
reg = <0x1013c000 0x100>;
};
+ pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu";
+ reg = <0x20004000 0x100>;
+ };
+
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v8 6/6] ARM: rockchip: add smp bringup code
2014-02-25 11:44 ` Heiko Stübner
(?)
@ 2014-02-25 11:48 ` Heiko Stübner
-1 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:48 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
This adds the necessary smp-operations and startup code to use
additional cores on Rockchip SoCs.
We currently hog the power management unit in the smp code, as it is
necessary to control the power to the cpu core and nothing else is
currently using it, so a generic implementation can be done later.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++++
arch/arm/mach-rockchip/headsmp.S | 30 +++++++
arch/arm/mach-rockchip/platsmp.c | 184 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
5 files changed, 239 insertions(+)
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 1547d4f..4377a14 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
new file mode 100644
index 0000000..e2e7c9d
--- /dev/null
+++ b/arch/arm/mach-rockchip/core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+extern char rockchip_secondary_trampoline;
+extern char rockchip_secondary_trampoline_end;
+
+extern unsigned long rockchip_boot_fn;
+extern void rockchip_secondary_startup(void);
+
+extern struct smp_operations rockchip_smp_ops;
diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S
new file mode 100644
index 0000000..73206e3
--- /dev/null
+++ b/arch/arm/mach-rockchip/headsmp.S
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ENTRY(rockchip_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(rockchip_secondary_startup)
+
+ENTRY(rockchip_secondary_trampoline)
+ ldr pc, 1f
+ENDPROC(rockchip_secondary_trampoline)
+ .globl rockchip_boot_fn
+rockchip_boot_fn:
+1: .space 4
+
+ENTRY(rockchip_secondary_trampoline_end)
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
new file mode 100644
index 0000000..dbfa5a2
--- /dev/null
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/mach/map.h>
+
+#include "core.h"
+
+static void __iomem *scu_base_addr;
+static void __iomem *sram_base_addr;
+static int ncores;
+
+#define PMU_PWRDN_CON 0x08
+#define PMU_PWRDN_ST 0x0c
+
+#define PMU_PWRDN_SCU 4
+
+static void __iomem *pmu_base_addr;
+
+static inline bool pmu_power_domain_is_on(int pd)
+{
+ return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd));
+}
+
+static void pmu_set_power_domain(int pd, bool on)
+{
+ u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON);
+ if (on)
+ val &= ~BIT(pd);
+ else
+ val |= BIT(pd);
+ writel(val, pmu_base_addr + PMU_PWRDN_CON);
+
+ while (pmu_power_domain_is_on(pd) != on) { }
+}
+
+/*
+ * Handling of CPU cores
+ */
+
+static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ if (!sram_base_addr || !pmu_base_addr) {
+ pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
+ return -ENXIO;
+ }
+
+ if (cpu >= ncores) {
+ pr_err("%s: cpu %d outside maximum number of cpus %d\n",
+ __func__, cpu, ncores);
+ return -ENXIO;
+ }
+
+ /* start the core */
+ pmu_set_power_domain(0 + cpu, true);
+
+ return 0;
+}
+
+/**
+ * rockchip_smp_prepare_sram - populate necessary sram block
+ * Starting cores execute the code residing at the start of the on-chip sram
+ * after power-on. Therefore make sure, this sram region is reserved and
+ * big enough. After this check, copy the trampoline code that directs the
+ * core to the real startup code in ram into the sram-region.
+ * @node: mmio-sram device node
+ */
+static int __init rockchip_smp_prepare_sram(struct device_node *node)
+{
+ unsigned int trampoline_sz = &rockchip_secondary_trampoline_end -
+ &rockchip_secondary_trampoline;
+ struct resource res;
+ unsigned int rsize;
+ int ret;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("%s: could not get address for node %s\n",
+ __func__, node->full_name);
+ return ret;
+ }
+
+ rsize = resource_size(&res);
+ if (rsize < trampoline_sz) {
+ pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n",
+ __func__, rsize, trampoline_sz);
+ return -EINVAL;
+ }
+
+ sram_base_addr = of_iomap(node, 0);
+
+ /* set the boot function for the sram code */
+ rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
+
+ /* copy the trampoline to sram, that runs during startup of the core */
+ memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
+ flush_cache_all();
+ outer_clean_range(0, trampoline_sz);
+
+ dsb_sev();
+
+ return 0;
+}
+
+static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *node;
+ unsigned int i;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!node) {
+ pr_err("%s: missing scu\n", __func__);
+ return;
+ }
+
+ scu_base_addr = of_iomap(node, 0);
+ if (!scu_base_addr) {
+ pr_err("%s: could not map scu registers\n", __func__);
+ return;
+ }
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
+ if (!node) {
+ pr_err("%s: could not find sram dt node\n", __func__);
+ return;
+ }
+
+ if (rockchip_smp_prepare_sram(node))
+ return;
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
+ if (!node) {
+ pr_err("%s: could not find sram dt node\n", __func__);
+ return;
+ }
+
+ pmu_base_addr = of_iomap(node, 0);
+ if (!pmu_base_addr) {
+ pr_err("%s: could not map pmu registers\n", __func__);
+ return;
+ }
+
+ /* enable the SCU power domain */
+ pmu_set_power_domain(PMU_PWRDN_SCU, true);
+
+ /*
+ * While the number of cpus is gathered from dt, also get the number
+ * of cores from the scu to verify this value when booting the cores.
+ */
+ ncores = scu_get_core_count(scu_base_addr);
+
+ scu_enable(scu_base_addr);
+
+ /* Make sure that all cores except the first are really off */
+ for (i = 1; i < ncores; i++)
+ pmu_set_power_domain(0 + i, false);
+}
+
+struct smp_operations rockchip_smp_ops __initdata = {
+ .smp_prepare_cpus = rockchip_smp_prepare_cpus,
+ .smp_boot_secondary = rockchip_boot_secondary,
+};
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 82c0b07..d211d6f 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
+#include "core.h"
static void __init rockchip_dt_init(void)
{
@@ -38,6 +39,7 @@ static const char * const rockchip_board_dt_compat[] = {
};
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
+ .smp = smp_ops(rockchip_smp_ops),
.init_machine = rockchip_dt_init,
.dt_compat = rockchip_board_dt_compat,
MACHINE_END
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 6/6] ARM: rockchip: add smp bringup code
@ 2014-02-25 11:48 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:48 UTC (permalink / raw)
To: linux-arm-kernel
This adds the necessary smp-operations and startup code to use
additional cores on Rockchip SoCs.
We currently hog the power management unit in the smp code, as it is
necessary to control the power to the cpu core and nothing else is
currently using it, so a generic implementation can be done later.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++++
arch/arm/mach-rockchip/headsmp.S | 30 +++++++
arch/arm/mach-rockchip/platsmp.c | 184 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
5 files changed, 239 insertions(+)
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 1547d4f..4377a14 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
new file mode 100644
index 0000000..e2e7c9d
--- /dev/null
+++ b/arch/arm/mach-rockchip/core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+extern char rockchip_secondary_trampoline;
+extern char rockchip_secondary_trampoline_end;
+
+extern unsigned long rockchip_boot_fn;
+extern void rockchip_secondary_startup(void);
+
+extern struct smp_operations rockchip_smp_ops;
diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S
new file mode 100644
index 0000000..73206e3
--- /dev/null
+++ b/arch/arm/mach-rockchip/headsmp.S
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ENTRY(rockchip_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(rockchip_secondary_startup)
+
+ENTRY(rockchip_secondary_trampoline)
+ ldr pc, 1f
+ENDPROC(rockchip_secondary_trampoline)
+ .globl rockchip_boot_fn
+rockchip_boot_fn:
+1: .space 4
+
+ENTRY(rockchip_secondary_trampoline_end)
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
new file mode 100644
index 0000000..dbfa5a2
--- /dev/null
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/mach/map.h>
+
+#include "core.h"
+
+static void __iomem *scu_base_addr;
+static void __iomem *sram_base_addr;
+static int ncores;
+
+#define PMU_PWRDN_CON 0x08
+#define PMU_PWRDN_ST 0x0c
+
+#define PMU_PWRDN_SCU 4
+
+static void __iomem *pmu_base_addr;
+
+static inline bool pmu_power_domain_is_on(int pd)
+{
+ return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd));
+}
+
+static void pmu_set_power_domain(int pd, bool on)
+{
+ u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON);
+ if (on)
+ val &= ~BIT(pd);
+ else
+ val |= BIT(pd);
+ writel(val, pmu_base_addr + PMU_PWRDN_CON);
+
+ while (pmu_power_domain_is_on(pd) != on) { }
+}
+
+/*
+ * Handling of CPU cores
+ */
+
+static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ if (!sram_base_addr || !pmu_base_addr) {
+ pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
+ return -ENXIO;
+ }
+
+ if (cpu >= ncores) {
+ pr_err("%s: cpu %d outside maximum number of cpus %d\n",
+ __func__, cpu, ncores);
+ return -ENXIO;
+ }
+
+ /* start the core */
+ pmu_set_power_domain(0 + cpu, true);
+
+ return 0;
+}
+
+/**
+ * rockchip_smp_prepare_sram - populate necessary sram block
+ * Starting cores execute the code residing at the start of the on-chip sram
+ * after power-on. Therefore make sure, this sram region is reserved and
+ * big enough. After this check, copy the trampoline code that directs the
+ * core to the real startup code in ram into the sram-region.
+ * @node: mmio-sram device node
+ */
+static int __init rockchip_smp_prepare_sram(struct device_node *node)
+{
+ unsigned int trampoline_sz = &rockchip_secondary_trampoline_end -
+ &rockchip_secondary_trampoline;
+ struct resource res;
+ unsigned int rsize;
+ int ret;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("%s: could not get address for node %s\n",
+ __func__, node->full_name);
+ return ret;
+ }
+
+ rsize = resource_size(&res);
+ if (rsize < trampoline_sz) {
+ pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n",
+ __func__, rsize, trampoline_sz);
+ return -EINVAL;
+ }
+
+ sram_base_addr = of_iomap(node, 0);
+
+ /* set the boot function for the sram code */
+ rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
+
+ /* copy the trampoline to sram, that runs during startup of the core */
+ memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
+ flush_cache_all();
+ outer_clean_range(0, trampoline_sz);
+
+ dsb_sev();
+
+ return 0;
+}
+
+static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *node;
+ unsigned int i;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!node) {
+ pr_err("%s: missing scu\n", __func__);
+ return;
+ }
+
+ scu_base_addr = of_iomap(node, 0);
+ if (!scu_base_addr) {
+ pr_err("%s: could not map scu registers\n", __func__);
+ return;
+ }
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
+ if (!node) {
+ pr_err("%s: could not find sram dt node\n", __func__);
+ return;
+ }
+
+ if (rockchip_smp_prepare_sram(node))
+ return;
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
+ if (!node) {
+ pr_err("%s: could not find sram dt node\n", __func__);
+ return;
+ }
+
+ pmu_base_addr = of_iomap(node, 0);
+ if (!pmu_base_addr) {
+ pr_err("%s: could not map pmu registers\n", __func__);
+ return;
+ }
+
+ /* enable the SCU power domain */
+ pmu_set_power_domain(PMU_PWRDN_SCU, true);
+
+ /*
+ * While the number of cpus is gathered from dt, also get the number
+ * of cores from the scu to verify this value when booting the cores.
+ */
+ ncores = scu_get_core_count(scu_base_addr);
+
+ scu_enable(scu_base_addr);
+
+ /* Make sure that all cores except the first are really off */
+ for (i = 1; i < ncores; i++)
+ pmu_set_power_domain(0 + i, false);
+}
+
+struct smp_operations rockchip_smp_ops __initdata = {
+ .smp_prepare_cpus = rockchip_smp_prepare_cpus,
+ .smp_boot_secondary = rockchip_boot_secondary,
+};
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 82c0b07..d211d6f 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
+#include "core.h"
static void __init rockchip_dt_init(void)
{
@@ -38,6 +39,7 @@ static const char * const rockchip_board_dt_compat[] = {
};
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
+ .smp = smp_ops(rockchip_smp_ops),
.init_machine = rockchip_dt_init,
.dt_compat = rockchip_board_dt_compat,
MACHINE_END
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH v8 6/6] ARM: rockchip: add smp bringup code
@ 2014-02-25 11:48 ` Heiko Stübner
0 siblings, 0 replies; 33+ messages in thread
From: Heiko Stübner @ 2014-02-25 11:48 UTC (permalink / raw)
To: linux-arm-kernel
Cc: arm, Grant Likely, Rob Herring, devicetree, Philipp Zabel,
linux-kernel, Greg Kroah-Hartman, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell
This adds the necessary smp-operations and startup code to use
additional cores on Rockchip SoCs.
We currently hog the power management unit in the smp code, as it is
necessary to control the power to the cpu core and nothing else is
currently using it, so a generic implementation can be done later.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
---
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++++
arch/arm/mach-rockchip/headsmp.S | 30 +++++++
arch/arm/mach-rockchip/platsmp.c | 184 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
5 files changed, 239 insertions(+)
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 1547d4f..4377a14 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
new file mode 100644
index 0000000..e2e7c9d
--- /dev/null
+++ b/arch/arm/mach-rockchip/core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+extern char rockchip_secondary_trampoline;
+extern char rockchip_secondary_trampoline_end;
+
+extern unsigned long rockchip_boot_fn;
+extern void rockchip_secondary_startup(void);
+
+extern struct smp_operations rockchip_smp_ops;
diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S
new file mode 100644
index 0000000..73206e3
--- /dev/null
+++ b/arch/arm/mach-rockchip/headsmp.S
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ENTRY(rockchip_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(rockchip_secondary_startup)
+
+ENTRY(rockchip_secondary_trampoline)
+ ldr pc, 1f
+ENDPROC(rockchip_secondary_trampoline)
+ .globl rockchip_boot_fn
+rockchip_boot_fn:
+1: .space 4
+
+ENTRY(rockchip_secondary_trampoline_end)
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
new file mode 100644
index 0000000..dbfa5a2
--- /dev/null
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/mach/map.h>
+
+#include "core.h"
+
+static void __iomem *scu_base_addr;
+static void __iomem *sram_base_addr;
+static int ncores;
+
+#define PMU_PWRDN_CON 0x08
+#define PMU_PWRDN_ST 0x0c
+
+#define PMU_PWRDN_SCU 4
+
+static void __iomem *pmu_base_addr;
+
+static inline bool pmu_power_domain_is_on(int pd)
+{
+ return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd));
+}
+
+static void pmu_set_power_domain(int pd, bool on)
+{
+ u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON);
+ if (on)
+ val &= ~BIT(pd);
+ else
+ val |= BIT(pd);
+ writel(val, pmu_base_addr + PMU_PWRDN_CON);
+
+ while (pmu_power_domain_is_on(pd) != on) { }
+}
+
+/*
+ * Handling of CPU cores
+ */
+
+static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ if (!sram_base_addr || !pmu_base_addr) {
+ pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
+ return -ENXIO;
+ }
+
+ if (cpu >= ncores) {
+ pr_err("%s: cpu %d outside maximum number of cpus %d\n",
+ __func__, cpu, ncores);
+ return -ENXIO;
+ }
+
+ /* start the core */
+ pmu_set_power_domain(0 + cpu, true);
+
+ return 0;
+}
+
+/**
+ * rockchip_smp_prepare_sram - populate necessary sram block
+ * Starting cores execute the code residing at the start of the on-chip sram
+ * after power-on. Therefore make sure, this sram region is reserved and
+ * big enough. After this check, copy the trampoline code that directs the
+ * core to the real startup code in ram into the sram-region.
+ * @node: mmio-sram device node
+ */
+static int __init rockchip_smp_prepare_sram(struct device_node *node)
+{
+ unsigned int trampoline_sz = &rockchip_secondary_trampoline_end -
+ &rockchip_secondary_trampoline;
+ struct resource res;
+ unsigned int rsize;
+ int ret;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("%s: could not get address for node %s\n",
+ __func__, node->full_name);
+ return ret;
+ }
+
+ rsize = resource_size(&res);
+ if (rsize < trampoline_sz) {
+ pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n",
+ __func__, rsize, trampoline_sz);
+ return -EINVAL;
+ }
+
+ sram_base_addr = of_iomap(node, 0);
+
+ /* set the boot function for the sram code */
+ rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
+
+ /* copy the trampoline to sram, that runs during startup of the core */
+ memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
+ flush_cache_all();
+ outer_clean_range(0, trampoline_sz);
+
+ dsb_sev();
+
+ return 0;
+}
+
+static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *node;
+ unsigned int i;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!node) {
+ pr_err("%s: missing scu\n", __func__);
+ return;
+ }
+
+ scu_base_addr = of_iomap(node, 0);
+ if (!scu_base_addr) {
+ pr_err("%s: could not map scu registers\n", __func__);
+ return;
+ }
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
+ if (!node) {
+ pr_err("%s: could not find sram dt node\n", __func__);
+ return;
+ }
+
+ if (rockchip_smp_prepare_sram(node))
+ return;
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
+ if (!node) {
+ pr_err("%s: could not find sram dt node\n", __func__);
+ return;
+ }
+
+ pmu_base_addr = of_iomap(node, 0);
+ if (!pmu_base_addr) {
+ pr_err("%s: could not map pmu registers\n", __func__);
+ return;
+ }
+
+ /* enable the SCU power domain */
+ pmu_set_power_domain(PMU_PWRDN_SCU, true);
+
+ /*
+ * While the number of cpus is gathered from dt, also get the number
+ * of cores from the scu to verify this value when booting the cores.
+ */
+ ncores = scu_get_core_count(scu_base_addr);
+
+ scu_enable(scu_base_addr);
+
+ /* Make sure that all cores except the first are really off */
+ for (i = 1; i < ncores; i++)
+ pmu_set_power_domain(0 + i, false);
+}
+
+struct smp_operations rockchip_smp_ops __initdata = {
+ .smp_prepare_cpus = rockchip_smp_prepare_cpus,
+ .smp_boot_secondary = rockchip_boot_secondary,
+};
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 82c0b07..d211d6f 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
+#include "core.h"
static void __init rockchip_dt_init(void)
{
@@ -38,6 +39,7 @@ static const char * const rockchip_board_dt_compat[] = {
};
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
+ .smp = smp_ops(rockchip_smp_ops),
.init_machine = rockchip_dt_init,
.dt_compat = rockchip_board_dt_compat,
MACHINE_END
--
1.8.5.3
^ permalink raw reply related [flat|nested] 33+ messages in thread