* PM domain change on unbound devices warning on ipmi_si unload
@ 2016-01-28 4:45 Joe Lawrence
2016-01-28 13:56 ` Corey Minyard
0 siblings, 1 reply; 10+ messages in thread
From: Joe Lawrence @ 2016-01-28 4:45 UTC (permalink / raw)
To: LKML; +Cc: Tomeu Vizoso, Corey Minyard
Starting in 4.5-rc1, I noticed this warning on ipmi_si driver removal:
% modprobe ipmi_si
% rmmod ipmi_si
bus: 'platform': driver_probe_device: matched device IPI0001:00 with driver ipmi_si
bus: 'platform': really_probe: probing driver ipmi_si with device IPI0001:00
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
driver: 'ipmi_si': driver_bound: bound to device 'IPI0001:00'
bus: 'platform': really_probe: bound device IPI0001:00 to driver ipmi_si
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xda2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Registering platform device 'ipmi_bmc.0674.66'. Parent at platform
driver: 'ipmi': driver_bound: bound to device 'ipmi_bmc.0674.66'
ipmi_si IPI0001:00: Found new BMC (man_id: 0x000077, prod_id: 0x0674, dev_id: 0x42)
ipmi_si IPI0001:00: IPMI kcs interface initialized
------------[ cut here ]------------
WARNING: CPU: 39 PID: 3678 at drivers/base/power/common.c:150 dev_pm_domain_set+0x52/0x60()
PM domains can only be changed for unbound devices
[ ... snip ... ]
CPU: 39 PID: 3678 Comm: rmmod Tainted: G OE 4.5.0-rc1+ #57
Hardware name: Stratus ftServer 6800/G7LYY, BIOS BIOS Version 8.1:61 09/10/2015
0000000000000000 000000003883b68d ffff8820334d7d30 ffffffff8132caf0
ffff8820334d7d78 ffff8820334d7d68 ffffffff8107f1b6 ffff8810351eca00
0000000000000000 0000000000000001 0000000001c2a330 0000000001c29010
Call Trace:
[<ffffffff8132caf0>] dump_stack+0x44/0x64
[<ffffffff8107f1b6>] warn_slowpath_common+0x86/0xc0
[<ffffffff8107f24c>] warn_slowpath_fmt+0x5c/0x80
[<ffffffff8145e152>] dev_pm_domain_set+0x52/0x60
[<ffffffff813a38ae>] acpi_dev_pm_detach+0x3f/0x84
[<ffffffff8145e0d7>] dev_pm_domain_detach+0x27/0x30
[<ffffffff814575f8>] platform_drv_remove+0x38/0x40
[<ffffffff814557ba>] __device_release_driver+0x9a/0x140
[<ffffffff81455968>] driver_detach+0xb8/0xc0
[<ffffffff814547b5>] bus_remove_driver+0x55/0xd0
[<ffffffff814560cc>] driver_unregister+0x2c/0x50
[<ffffffff814576b2>] platform_driver_unregister+0x12/0x20
[<ffffffffa02586c9>] cleanup_ipmi_si+0x29/0xa0 [ipmi_si]
[<ffffffff81102100>] SyS_delete_module+0x190/0x220
[<ffffffff8167ffee>] entry_SYSCALL_64_fastpath+0x12/0x71
---[ end trace 671ca97b9ac15462 ]---
My platform has two BMCs (perhaps this is messing with a refcount
somewhere), but I wonder about the ordering of this code:
__device_release_driver(struct device *dev)
drv->remove(dev);
[ platform_drv_remove ]
...
dev_pm_domain_detach
device_is_bound
return dev->p && klist_node_attached(&dev->p->knode_driver)
...
klist_remove(&dev->p->knode_driver);
Is the klist_remove at the bottom of __device_release_driver necessary
to satisfy the earlier check in dev_pm_domain_detach's device_is_bound
assertion? If so, could these be out of order?
This is core driver code, so I'm assuming it's not something as simple
as the following (which avoided the warning on unload at least). Any
suggestions or extra debugging ideas welcome! This occurs on every
unload, so I'd be glad to test real solutions :)
Thanks,
-- Joe
-->8--
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index c4da2df..bba54e1 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -756,6 +756,7 @@ static void __device_release_driver(struct device *dev)
pm_runtime_put_sync(dev);
+ klist_remove(&dev->p->knode_driver);
if (dev->bus && dev->bus->remove)
dev->bus->remove(dev);
else if (drv->remove)
@@ -767,7 +768,6 @@ static void __device_release_driver(struct device *dev)
dev->pm_domain->dismiss(dev);
pm_runtime_reinit(dev);
- klist_remove(&dev->p->knode_driver);
device_pm_check_callbacks(dev);
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-28 4:45 PM domain change on unbound devices warning on ipmi_si unload Joe Lawrence
@ 2016-01-28 13:56 ` Corey Minyard
2016-01-28 20:13 ` Corey Minyard
0 siblings, 1 reply; 10+ messages in thread
From: Corey Minyard @ 2016-01-28 13:56 UTC (permalink / raw)
To: Joe Lawrence, LKML; +Cc: Tomeu Vizoso
On 01/27/2016 10:45 PM, Joe Lawrence wrote:
> Starting in 4.5-rc1, I noticed this warning on ipmi_si driver removal:
>
> % modprobe ipmi_si
> % rmmod ipmi_si
Yes, I had just noticed this yesterday and I was going to try to trace
it down today.
I had assumed it was an IPMI driver problem, but after looking at it a
bit, I don't think
it is. I'll try to bisect to see what caused this, nothing obvious
jumps out
-corey
>
> bus: 'platform': driver_probe_device: matched device IPI0001:00 with driver ipmi_si
> bus: 'platform': really_probe: probing driver ipmi_si with device IPI0001:00
> ipmi_si IPI0001:00: ipmi_si: probing via ACPI
> ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
> ipmi_si: Adding ACPI-specified kcs state machine
> driver: 'ipmi_si': driver_bound: bound to device 'IPI0001:00'
> bus: 'platform': really_probe: bound device IPI0001:00 to driver ipmi_si
> IPMI System Interface driver.
> ipmi_si: probing via SMBIOS
> ipmi_si: SMBIOS: io 0xda2 regsize 1 spacing 1 irq 0
> ipmi_si: Adding SMBIOS-specified kcs state machine
> ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
> Registering platform device 'ipmi_bmc.0674.66'. Parent at platform
> driver: 'ipmi': driver_bound: bound to device 'ipmi_bmc.0674.66'
> ipmi_si IPI0001:00: Found new BMC (man_id: 0x000077, prod_id: 0x0674, dev_id: 0x42)
> ipmi_si IPI0001:00: IPMI kcs interface initialized
> ------------[ cut here ]------------
> WARNING: CPU: 39 PID: 3678 at drivers/base/power/common.c:150 dev_pm_domain_set+0x52/0x60()
> PM domains can only be changed for unbound devices
> [ ... snip ... ]
> CPU: 39 PID: 3678 Comm: rmmod Tainted: G OE 4.5.0-rc1+ #57
> Hardware name: Stratus ftServer 6800/G7LYY, BIOS BIOS Version 8.1:61 09/10/2015
> 0000000000000000 000000003883b68d ffff8820334d7d30 ffffffff8132caf0
> ffff8820334d7d78 ffff8820334d7d68 ffffffff8107f1b6 ffff8810351eca00
> 0000000000000000 0000000000000001 0000000001c2a330 0000000001c29010
> Call Trace:
> [<ffffffff8132caf0>] dump_stack+0x44/0x64
> [<ffffffff8107f1b6>] warn_slowpath_common+0x86/0xc0
> [<ffffffff8107f24c>] warn_slowpath_fmt+0x5c/0x80
> [<ffffffff8145e152>] dev_pm_domain_set+0x52/0x60
> [<ffffffff813a38ae>] acpi_dev_pm_detach+0x3f/0x84
> [<ffffffff8145e0d7>] dev_pm_domain_detach+0x27/0x30
> [<ffffffff814575f8>] platform_drv_remove+0x38/0x40
> [<ffffffff814557ba>] __device_release_driver+0x9a/0x140
> [<ffffffff81455968>] driver_detach+0xb8/0xc0
> [<ffffffff814547b5>] bus_remove_driver+0x55/0xd0
> [<ffffffff814560cc>] driver_unregister+0x2c/0x50
> [<ffffffff814576b2>] platform_driver_unregister+0x12/0x20
> [<ffffffffa02586c9>] cleanup_ipmi_si+0x29/0xa0 [ipmi_si]
> [<ffffffff81102100>] SyS_delete_module+0x190/0x220
> [<ffffffff8167ffee>] entry_SYSCALL_64_fastpath+0x12/0x71
> ---[ end trace 671ca97b9ac15462 ]---
>
> My platform has two BMCs (perhaps this is messing with a refcount
> somewhere), but I wonder about the ordering of this code:
>
> __device_release_driver(struct device *dev)
>
> drv->remove(dev);
> [ platform_drv_remove ]
> ...
> dev_pm_domain_detach
> device_is_bound
> return dev->p && klist_node_attached(&dev->p->knode_driver)
> ...
> klist_remove(&dev->p->knode_driver);
>
> Is the klist_remove at the bottom of __device_release_driver necessary
> to satisfy the earlier check in dev_pm_domain_detach's device_is_bound
> assertion? If so, could these be out of order?
>
> This is core driver code, so I'm assuming it's not something as simple
> as the following (which avoided the warning on unload at least). Any
> suggestions or extra debugging ideas welcome! This occurs on every
> unload, so I'd be glad to test real solutions :)
>
> Thanks,
>
> -- Joe
>
> -->8--
>
> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
> index c4da2df..bba54e1 100644
> --- a/drivers/base/dd.c
> +++ b/drivers/base/dd.c
> @@ -756,6 +756,7 @@ static void __device_release_driver(struct device *dev)
>
> pm_runtime_put_sync(dev);
>
> + klist_remove(&dev->p->knode_driver);
> if (dev->bus && dev->bus->remove)
> dev->bus->remove(dev);
> else if (drv->remove)
> @@ -767,7 +768,6 @@ static void __device_release_driver(struct device *dev)
> dev->pm_domain->dismiss(dev);
> pm_runtime_reinit(dev);
>
> - klist_remove(&dev->p->knode_driver);
> device_pm_check_callbacks(dev);
> if (dev->bus)
> blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-28 13:56 ` Corey Minyard
@ 2016-01-28 20:13 ` Corey Minyard
2016-01-29 17:01 ` Steven Rostedt
0 siblings, 1 reply; 10+ messages in thread
From: Corey Minyard @ 2016-01-28 20:13 UTC (permalink / raw)
To: Joe Lawrence, LKML; +Cc: Tomeu Vizoso
Tomeu, you added that check in
[989561de9b5112999475b406557d9c7e9e59c041] PM / Domains: add setter for
dev.pm_domain
and either something is wrong in the platform device handling or
elsewhere in the device code, if
that check is valid.
-corey
On 01/28/2016 07:56 AM, Corey Minyard wrote:
> On 01/27/2016 10:45 PM, Joe Lawrence wrote:
>> Starting in 4.5-rc1, I noticed this warning on ipmi_si driver removal:
>>
>> % modprobe ipmi_si
>> % rmmod ipmi_si
>
> Yes, I had just noticed this yesterday and I was going to try to trace
> it down today.
> I had assumed it was an IPMI driver problem, but after looking at it a
> bit, I don't think
> it is. I'll try to bisect to see what caused this, nothing obvious
> jumps out
>
> -corey
>
>>
>> bus: 'platform': driver_probe_device: matched device IPI0001:00 with
>> driver ipmi_si
>> bus: 'platform': really_probe: probing driver ipmi_si with device
>> IPI0001:00
>> ipmi_si IPI0001:00: ipmi_si: probing via ACPI
>> ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
>> ipmi_si: Adding ACPI-specified kcs state machine
>> driver: 'ipmi_si': driver_bound: bound to device 'IPI0001:00'
>> bus: 'platform': really_probe: bound device IPI0001:00 to driver ipmi_si
>> IPMI System Interface driver.
>> ipmi_si: probing via SMBIOS
>> ipmi_si: SMBIOS: io 0xda2 regsize 1 spacing 1 irq 0
>> ipmi_si: Adding SMBIOS-specified kcs state machine
>> ipmi_si: Trying ACPI-specified kcs state machine at i/o address
>> 0xca2, slave address 0x0, irq 0
>> Registering platform device 'ipmi_bmc.0674.66'. Parent at platform
>> driver: 'ipmi': driver_bound: bound to device 'ipmi_bmc.0674.66'
>> ipmi_si IPI0001:00: Found new BMC (man_id: 0x000077, prod_id: 0x0674,
>> dev_id: 0x42)
>> ipmi_si IPI0001:00: IPMI kcs interface initialized
>> ------------[ cut here ]------------
>> WARNING: CPU: 39 PID: 3678 at drivers/base/power/common.c:150
>> dev_pm_domain_set+0x52/0x60()
>> PM domains can only be changed for unbound devices
>> [ ... snip ... ]
>> CPU: 39 PID: 3678 Comm: rmmod Tainted: G OE 4.5.0-rc1+ #57
>> Hardware name: Stratus ftServer 6800/G7LYY, BIOS BIOS Version 8.1:61
>> 09/10/2015
>> 0000000000000000 000000003883b68d ffff8820334d7d30 ffffffff8132caf0
>> ffff8820334d7d78 ffff8820334d7d68 ffffffff8107f1b6 ffff8810351eca00
>> 0000000000000000 0000000000000001 0000000001c2a330 0000000001c29010
>> Call Trace:
>> [<ffffffff8132caf0>] dump_stack+0x44/0x64
>> [<ffffffff8107f1b6>] warn_slowpath_common+0x86/0xc0
>> [<ffffffff8107f24c>] warn_slowpath_fmt+0x5c/0x80
>> [<ffffffff8145e152>] dev_pm_domain_set+0x52/0x60
>> [<ffffffff813a38ae>] acpi_dev_pm_detach+0x3f/0x84
>> [<ffffffff8145e0d7>] dev_pm_domain_detach+0x27/0x30
>> [<ffffffff814575f8>] platform_drv_remove+0x38/0x40
>> [<ffffffff814557ba>] __device_release_driver+0x9a/0x140
>> [<ffffffff81455968>] driver_detach+0xb8/0xc0
>> [<ffffffff814547b5>] bus_remove_driver+0x55/0xd0
>> [<ffffffff814560cc>] driver_unregister+0x2c/0x50
>> [<ffffffff814576b2>] platform_driver_unregister+0x12/0x20
>> [<ffffffffa02586c9>] cleanup_ipmi_si+0x29/0xa0 [ipmi_si]
>> [<ffffffff81102100>] SyS_delete_module+0x190/0x220
>> [<ffffffff8167ffee>] entry_SYSCALL_64_fastpath+0x12/0x71
>> ---[ end trace 671ca97b9ac15462 ]---
>>
>> My platform has two BMCs (perhaps this is messing with a refcount
>> somewhere), but I wonder about the ordering of this code:
>>
>> __device_release_driver(struct device *dev)
>>
>> drv->remove(dev);
>> [ platform_drv_remove ]
>> ...
>> dev_pm_domain_detach
>> device_is_bound
>> return dev->p && klist_node_attached(&dev->p->knode_driver)
>> ...
>> klist_remove(&dev->p->knode_driver);
>>
>> Is the klist_remove at the bottom of __device_release_driver necessary
>> to satisfy the earlier check in dev_pm_domain_detach's device_is_bound
>> assertion? If so, could these be out of order?
>>
>> This is core driver code, so I'm assuming it's not something as simple
>> as the following (which avoided the warning on unload at least). Any
>> suggestions or extra debugging ideas welcome! This occurs on every
>> unload, so I'd be glad to test real solutions :)
>>
>> Thanks,
>>
>> -- Joe
>>
>> -->8--
>>
>> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
>> index c4da2df..bba54e1 100644
>> --- a/drivers/base/dd.c
>> +++ b/drivers/base/dd.c
>> @@ -756,6 +756,7 @@ static void __device_release_driver(struct device
>> *dev)
>>
>> pm_runtime_put_sync(dev);
>>
>> + klist_remove(&dev->p->knode_driver);
>> if (dev->bus && dev->bus->remove)
>> dev->bus->remove(dev);
>> else if (drv->remove)
>> @@ -767,7 +768,6 @@ static void __device_release_driver(struct device
>> *dev)
>> dev->pm_domain->dismiss(dev);
>> pm_runtime_reinit(dev);
>>
>> - klist_remove(&dev->p->knode_driver);
>> device_pm_check_callbacks(dev);
>> if (dev->bus)
>> blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-28 20:13 ` Corey Minyard
@ 2016-01-29 17:01 ` Steven Rostedt
2016-01-29 17:56 ` Joe Lawrence
0 siblings, 1 reply; 10+ messages in thread
From: Steven Rostedt @ 2016-01-29 17:01 UTC (permalink / raw)
To: Corey Minyard; +Cc: Joe Lawrence, LKML, Tomeu Vizoso
On Thu, Jan 28, 2016 at 02:13:04PM -0600, Corey Minyard wrote:
> Tomeu, you added that check in
>
> [989561de9b5112999475b406557d9c7e9e59c041] PM / Domains: add setter for
> dev.pm_domain
>
> and either something is wrong in the platform device handling or elsewhere
> in the device code, if
> that check is valid.
>
FYI, I'm hitting the exact same error on shutdown on one of my boxes.
Please Cc me on updates.
-- Steve
[53591.087861] kvm: exiting hardware virtualization
[53591.104798] ------------[ cut here ]------------
[53591.110058] WARNING: CPU: 0 PID: 1 at /home/rostedt/work/git/linux-trace.git/drivers/base/power/common.c:150 dev_pm_domain_set+0x82/0x90()
[53591.123716] PM domains can only be changed for unbound devices
[53591.130158] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc bluetooth lockd grace snd_hda_codec_hdmi snd_hda_codec_r
ealtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core vhost_net tun vhost x86_pkg_temp_thermal iTCO_wdt snd_seq snd_seq_device snd_pcm macvtap coretemp me
i_me iTCO_vendor_support hp_wmi rfkill sparse_keymap macvlan kvm_intel snd_timer mei lpc_ich snd i2c_i801 soundcore mfd_core kvm irqbypass acpi_cpufreq serio_raw wmi uinput crc32_p
clmul i915 crc32c_intel i2c_algo_bit e1000e drm_kms_helper ptp drm pps_core i2c_core video sunrpc
[53591.190440] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.5.0-rc1-test+ #155
[53591.198453] Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
[53591.208031] ffff8801195abc90 ffff8801195abc90 ffffffff8143ef63 ffff8801195abcd8
[53591.216168] ffff8801195abcc8 ffffffff810acad6 ffff8801192d2328 0000000000000000
[53591.224299] 0000000000000001 ffff8801192d2388 00000000fee1dead ffff8801195abd28
[53591.232429] Call Trace:
[53591.235483] [<ffffffff8143ef63>] dump_stack+0x44/0x61
[53591.241232] [<ffffffff810acad6>] warn_slowpath_common+0x86/0xc0
[53591.247842] [<ffffffff810acb5c>] warn_slowpath_fmt+0x4c/0x50
[53591.254193] [<ffffffff810acb15>] ? warn_slowpath_fmt+0x5/0x50
[53591.260625] [<ffffffff8157cf42>] dev_pm_domain_set+0x82/0x90
[53591.266970] [<ffffffffa03f255e>] mei_me_remove+0xee/0x120 [mei_me]
[53591.273842] [<ffffffff8147fe96>] pci_device_shutdown+0x36/0x70
[53591.280373] [<ffffffff81570680>] device_shutdown+0xe0/0x1e0
[53591.286642] [<ffffffff810d6df6>] kernel_restart_prepare+0x36/0x40
[53591.293439] [<ffffffff810d6f62>] kernel_restart+0x12/0x60
[53591.299543] [<ffffffff810d72ae>] SYSC_reboot+0x1ce/0x1f0
[53591.305562] [<ffffffffa0008077>] ? 0xffffffffa0008077
[53591.311323] [<ffffffff811b2e60>] ? stack_trace_call+0x40/0x60
[53591.317780] [<ffffffffa0008077>] ? 0xffffffffa0008077
[53591.323552] [<ffffffff8143eeb4>] ? _atomic_dec_and_lock+0x44/0xaf
[53591.330374] [<ffffffff812a302b>] ? iput+0xbb/0x2c0
[53591.335880] [<ffffffff810d7325>] ? SyS_reboot+0x5/0x10
[53591.341748] [<ffffffff81003044>] ? lockdep_sys_exit_thunk+0x12/0x14
[53591.348743] [<ffffffff810d732e>] SyS_reboot+0xe/0x10
[53591.354440] [<ffffffff8185ee32>] entry_SYSCALL_64_fastpath+0x12/0x76
[53591.361534] ---[ end trace 63b298fc6d5920e4 ]---
[53591.377714] e1000e: EEE TX LPI TIMER: 00000011
[53591.468245] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[53591.487321] reboot: Restarting system
[53591.491679] reboot: machine restart
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-29 17:01 ` Steven Rostedt
@ 2016-01-29 17:56 ` Joe Lawrence
2016-01-29 21:45 ` Rafael J. Wysocki
0 siblings, 1 reply; 10+ messages in thread
From: Joe Lawrence @ 2016-01-29 17:56 UTC (permalink / raw)
To: Steven Rostedt, Corey Minyard; +Cc: LKML, Tomeu Vizoso, Rafael J. Wysocki
On 01/29/2016 12:01 PM, Steven Rostedt wrote:
> On Thu, Jan 28, 2016 at 02:13:04PM -0600, Corey Minyard wrote:
>> Tomeu, you added that check in
>>
>> [989561de9b5112999475b406557d9c7e9e59c041] PM / Domains: add setter for
>> dev.pm_domain
>>
>> and either something is wrong in the platform device handling or elsewhere
>> in the device code, if
>> that check is valid.
>>
>
> FYI, I'm hitting the exact same error on shutdown on one of my boxes.
>
> Please Cc me on updates.
>
> -- Steve
>
>
> [53591.087861] kvm: exiting hardware virtualization
> [53591.104798] ------------[ cut here ]------------
> [53591.110058] WARNING: CPU: 0 PID: 1 at /home/rostedt/work/git/linux-trace.git/drivers/base/power/common.c:150 dev_pm_domain_set+0x82/0x90()
> [53591.123716] PM domains can only be changed for unbound devices
> [53591.130158] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc bluetooth lockd grace snd_hda_codec_hdmi snd_hda_codec_r
> ealtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core vhost_net tun vhost x86_pkg_temp_thermal iTCO_wdt snd_seq snd_seq_device snd_pcm macvtap coretemp me
> i_me iTCO_vendor_support hp_wmi rfkill sparse_keymap macvlan kvm_intel snd_timer mei lpc_ich snd i2c_i801 soundcore mfd_core kvm irqbypass acpi_cpufreq serio_raw wmi uinput crc32_p
> clmul i915 crc32c_intel i2c_algo_bit e1000e drm_kms_helper ptp drm pps_core i2c_core video sunrpc
> [53591.190440] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.5.0-rc1-test+ #155
> [53591.198453] Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
> [53591.208031] ffff8801195abc90 ffff8801195abc90 ffffffff8143ef63 ffff8801195abcd8
> [53591.216168] ffff8801195abcc8 ffffffff810acad6 ffff8801192d2328 0000000000000000
> [53591.224299] 0000000000000001 ffff8801192d2388 00000000fee1dead ffff8801195abd28
> [53591.232429] Call Trace:
> [53591.235483] [<ffffffff8143ef63>] dump_stack+0x44/0x61
> [53591.241232] [<ffffffff810acad6>] warn_slowpath_common+0x86/0xc0
> [53591.247842] [<ffffffff810acb5c>] warn_slowpath_fmt+0x4c/0x50
> [53591.254193] [<ffffffff810acb15>] ? warn_slowpath_fmt+0x5/0x50
> [53591.260625] [<ffffffff8157cf42>] dev_pm_domain_set+0x82/0x90
> [53591.266970] [<ffffffffa03f255e>] mei_me_remove+0xee/0x120 [mei_me]
> [53591.273842] [<ffffffff8147fe96>] pci_device_shutdown+0x36/0x70
> [53591.280373] [<ffffffff81570680>] device_shutdown+0xe0/0x1e0
> [53591.286642] [<ffffffff810d6df6>] kernel_restart_prepare+0x36/0x40
> [53591.293439] [<ffffffff810d6f62>] kernel_restart+0x12/0x60
> [53591.299543] [<ffffffff810d72ae>] SYSC_reboot+0x1ce/0x1f0
> [53591.305562] [<ffffffffa0008077>] ? 0xffffffffa0008077
> [53591.311323] [<ffffffff811b2e60>] ? stack_trace_call+0x40/0x60
> [53591.317780] [<ffffffffa0008077>] ? 0xffffffffa0008077
> [53591.323552] [<ffffffff8143eeb4>] ? _atomic_dec_and_lock+0x44/0xaf
> [53591.330374] [<ffffffff812a302b>] ? iput+0xbb/0x2c0
> [53591.335880] [<ffffffff810d7325>] ? SyS_reboot+0x5/0x10
> [53591.341748] [<ffffffff81003044>] ? lockdep_sys_exit_thunk+0x12/0x14
> [53591.348743] [<ffffffff810d732e>] SyS_reboot+0xe/0x10
> [53591.354440] [<ffffffff8185ee32>] entry_SYSCALL_64_fastpath+0x12/0x76
> [53591.361534] ---[ end trace 63b298fc6d5920e4 ]---
> [53591.377714] e1000e: EEE TX LPI TIMER: 00000011
> [53591.468245] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [53591.487321] reboot: Restarting system
> [53591.491679] reboot: machine restart
>
Looks like Rafael adjusted for the platform shutdown case here:
https://lkml.org/lkml/2016/1/11/515
Perhaps that would applicable to the pci shutdown as well?
-- Joe
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-29 17:56 ` Joe Lawrence
@ 2016-01-29 21:45 ` Rafael J. Wysocki
2016-01-31 21:38 ` Tomas Winkler
0 siblings, 1 reply; 10+ messages in thread
From: Rafael J. Wysocki @ 2016-01-29 21:45 UTC (permalink / raw)
To: Joe Lawrence
Cc: Steven Rostedt, Corey Minyard, LKML, Tomeu Vizoso, Rafael J. Wysocki
On Friday, January 29, 2016 12:56:14 PM Joe Lawrence wrote:
> On 01/29/2016 12:01 PM, Steven Rostedt wrote:
> > On Thu, Jan 28, 2016 at 02:13:04PM -0600, Corey Minyard wrote:
> >> Tomeu, you added that check in
> >>
> >> [989561de9b5112999475b406557d9c7e9e59c041] PM / Domains: add setter for
> >> dev.pm_domain
> >>
> >> and either something is wrong in the platform device handling or elsewhere
> >> in the device code, if
> >> that check is valid.
> >>
> >
> > FYI, I'm hitting the exact same error on shutdown on one of my boxes.
> >
> > Please Cc me on updates.
> >
> > -- Steve
> >
> >
> > [53591.087861] kvm: exiting hardware virtualization
> > [53591.104798] ------------[ cut here ]------------
> > [53591.110058] WARNING: CPU: 0 PID: 1 at /home/rostedt/work/git/linux-trace.git/drivers/base/power/common.c:150 dev_pm_domain_set+0x82/0x90()
> > [53591.123716] PM domains can only be changed for unbound devices
> > [53591.130158] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc bluetooth lockd grace snd_hda_codec_hdmi snd_hda_codec_r
> > ealtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core vhost_net tun vhost x86_pkg_temp_thermal iTCO_wdt snd_seq snd_seq_device snd_pcm macvtap coretemp me
> > i_me iTCO_vendor_support hp_wmi rfkill sparse_keymap macvlan kvm_intel snd_timer mei lpc_ich snd i2c_i801 soundcore mfd_core kvm irqbypass acpi_cpufreq serio_raw wmi uinput crc32_p
> > clmul i915 crc32c_intel i2c_algo_bit e1000e drm_kms_helper ptp drm pps_core i2c_core video sunrpc
> > [53591.190440] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.5.0-rc1-test+ #155
> > [53591.198453] Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
> > [53591.208031] ffff8801195abc90 ffff8801195abc90 ffffffff8143ef63 ffff8801195abcd8
> > [53591.216168] ffff8801195abcc8 ffffffff810acad6 ffff8801192d2328 0000000000000000
> > [53591.224299] 0000000000000001 ffff8801192d2388 00000000fee1dead ffff8801195abd28
> > [53591.232429] Call Trace:
> > [53591.235483] [<ffffffff8143ef63>] dump_stack+0x44/0x61
> > [53591.241232] [<ffffffff810acad6>] warn_slowpath_common+0x86/0xc0
> > [53591.247842] [<ffffffff810acb5c>] warn_slowpath_fmt+0x4c/0x50
> > [53591.254193] [<ffffffff810acb15>] ? warn_slowpath_fmt+0x5/0x50
> > [53591.260625] [<ffffffff8157cf42>] dev_pm_domain_set+0x82/0x90
> > [53591.266970] [<ffffffffa03f255e>] mei_me_remove+0xee/0x120 [mei_me]
> > [53591.273842] [<ffffffff8147fe96>] pci_device_shutdown+0x36/0x70
> > [53591.280373] [<ffffffff81570680>] device_shutdown+0xe0/0x1e0
> > [53591.286642] [<ffffffff810d6df6>] kernel_restart_prepare+0x36/0x40
> > [53591.293439] [<ffffffff810d6f62>] kernel_restart+0x12/0x60
> > [53591.299543] [<ffffffff810d72ae>] SYSC_reboot+0x1ce/0x1f0
> > [53591.305562] [<ffffffffa0008077>] ? 0xffffffffa0008077
> > [53591.311323] [<ffffffff811b2e60>] ? stack_trace_call+0x40/0x60
> > [53591.317780] [<ffffffffa0008077>] ? 0xffffffffa0008077
> > [53591.323552] [<ffffffff8143eeb4>] ? _atomic_dec_and_lock+0x44/0xaf
> > [53591.330374] [<ffffffff812a302b>] ? iput+0xbb/0x2c0
> > [53591.335880] [<ffffffff810d7325>] ? SyS_reboot+0x5/0x10
> > [53591.341748] [<ffffffff81003044>] ? lockdep_sys_exit_thunk+0x12/0x14
> > [53591.348743] [<ffffffff810d732e>] SyS_reboot+0xe/0x10
> > [53591.354440] [<ffffffff8185ee32>] entry_SYSCALL_64_fastpath+0x12/0x76
> > [53591.361534] ---[ end trace 63b298fc6d5920e4 ]---
> > [53591.377714] e1000e: EEE TX LPI TIMER: 00000011
> > [53591.468245] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > [53591.487321] reboot: Restarting system
> > [53591.491679] reboot: machine restart
> >
>
> Looks like Rafael adjusted for the platform shutdown case here:
>
> https://lkml.org/lkml/2016/1/11/515
>
> Perhaps that would applicable to the pci shutdown as well?
To the MEI driver's shutdown rather. mei_me_remove() clears the pm_domain
pointer which is sort of questionable, but then the warning may be overkill
for this case.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-29 21:45 ` Rafael J. Wysocki
@ 2016-01-31 21:38 ` Tomas Winkler
2016-02-03 0:56 ` Rafael J. Wysocki
0 siblings, 1 reply; 10+ messages in thread
From: Tomas Winkler @ 2016-01-31 21:38 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Joe Lawrence, Steven Rostedt, Corey Minyard, LKML, Tomeu Vizoso,
Rafael J. Wysocki
On Fri, Jan 29, 2016 at 11:45 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> On Friday, January 29, 2016 12:56:14 PM Joe Lawrence wrote:
>> On 01/29/2016 12:01 PM, Steven Rostedt wrote:
>> > On Thu, Jan 28, 2016 at 02:13:04PM -0600, Corey Minyard wrote:
>> >> Tomeu, you added that check in
>> >>
>> >> [989561de9b5112999475b406557d9c7e9e59c041] PM / Domains: add setter for
>> >> dev.pm_domain
>> >>
>> >> and either something is wrong in the platform device handling or elsewhere
>> >> in the device code, if
>> >> that check is valid.
>> >>
>> >
>> > FYI, I'm hitting the exact same error on shutdown on one of my boxes.
>> >
>> > Please Cc me on updates.
>> >
>> > -- Steve
>> >
>> >
>> > [53591.087861] kvm: exiting hardware virtualization
>> > [53591.104798] ------------[ cut here ]------------
>> > [53591.110058] WARNING: CPU: 0 PID: 1 at /home/rostedt/work/git/linux-trace.git/drivers/base/power/common.c:150 dev_pm_domain_set+0x82/0x90()
>> > [53591.123716] PM domains can only be changed for unbound devices
>> > [53591.130158] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc bluetooth lockd grace snd_hda_codec_hdmi snd_hda_codec_r
>> > ealtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core vhost_net tun vhost x86_pkg_temp_thermal iTCO_wdt snd_seq snd_seq_device snd_pcm macvtap coretemp me
>> > i_me iTCO_vendor_support hp_wmi rfkill sparse_keymap macvlan kvm_intel snd_timer mei lpc_ich snd i2c_i801 soundcore mfd_core kvm irqbypass acpi_cpufreq serio_raw wmi uinput crc32_p
>> > clmul i915 crc32c_intel i2c_algo_bit e1000e drm_kms_helper ptp drm pps_core i2c_core video sunrpc
>> > [53591.190440] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.5.0-rc1-test+ #155
>> > [53591.198453] Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
>> > [53591.208031] ffff8801195abc90 ffff8801195abc90 ffffffff8143ef63 ffff8801195abcd8
>> > [53591.216168] ffff8801195abcc8 ffffffff810acad6 ffff8801192d2328 0000000000000000
>> > [53591.224299] 0000000000000001 ffff8801192d2388 00000000fee1dead ffff8801195abd28
>> > [53591.232429] Call Trace:
>> > [53591.235483] [<ffffffff8143ef63>] dump_stack+0x44/0x61
>> > [53591.241232] [<ffffffff810acad6>] warn_slowpath_common+0x86/0xc0
>> > [53591.247842] [<ffffffff810acb5c>] warn_slowpath_fmt+0x4c/0x50
>> > [53591.254193] [<ffffffff810acb15>] ? warn_slowpath_fmt+0x5/0x50
>> > [53591.260625] [<ffffffff8157cf42>] dev_pm_domain_set+0x82/0x90
>> > [53591.266970] [<ffffffffa03f255e>] mei_me_remove+0xee/0x120 [mei_me]
>> > [53591.273842] [<ffffffff8147fe96>] pci_device_shutdown+0x36/0x70
>> > [53591.280373] [<ffffffff81570680>] device_shutdown+0xe0/0x1e0
>> > [53591.286642] [<ffffffff810d6df6>] kernel_restart_prepare+0x36/0x40
>> > [53591.293439] [<ffffffff810d6f62>] kernel_restart+0x12/0x60
>> > [53591.299543] [<ffffffff810d72ae>] SYSC_reboot+0x1ce/0x1f0
>> > [53591.305562] [<ffffffffa0008077>] ? 0xffffffffa0008077
>> > [53591.311323] [<ffffffff811b2e60>] ? stack_trace_call+0x40/0x60
>> > [53591.317780] [<ffffffffa0008077>] ? 0xffffffffa0008077
>> > [53591.323552] [<ffffffff8143eeb4>] ? _atomic_dec_and_lock+0x44/0xaf
>> > [53591.330374] [<ffffffff812a302b>] ? iput+0xbb/0x2c0
>> > [53591.335880] [<ffffffff810d7325>] ? SyS_reboot+0x5/0x10
>> > [53591.341748] [<ffffffff81003044>] ? lockdep_sys_exit_thunk+0x12/0x14
>> > [53591.348743] [<ffffffff810d732e>] SyS_reboot+0xe/0x10
>> > [53591.354440] [<ffffffff8185ee32>] entry_SYSCALL_64_fastpath+0x12/0x76
>> > [53591.361534] ---[ end trace 63b298fc6d5920e4 ]---
>> > [53591.377714] e1000e: EEE TX LPI TIMER: 00000011
>> > [53591.468245] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>> > [53591.487321] reboot: Restarting system
>> > [53591.491679] reboot: machine restart
>> >
>>
>> Looks like Rafael adjusted for the platform shutdown case here:
>>
>> https://lkml.org/lkml/2016/1/11/515
>>
>> Perhaps that would applicable to the pci shutdown as well?
>
> To the MEI driver's shutdown rather. mei_me_remove() clears the pm_domain
> pointer which is sort of questionable, but then the warning may be overkill
> for this case.
Since MEI device is running its own power management, in some cases
we are using PM domains just to avoid going through the PCI runtime
pm handlers to avoid going to D3. IIRC we couldn't use
PCI_DEV_FLAGS_NO_D3 as this not unique for runtime handlers
I think this requirement is unique to the MEI device, so I'm not
sure it's worth to push it into the PCI layer, maybe we just quite the
warning somehow.
Tomas
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-01-31 21:38 ` Tomas Winkler
@ 2016-02-03 0:56 ` Rafael J. Wysocki
2016-02-03 2:48 ` Joe Lawrence
2016-02-03 13:35 ` Steven Rostedt
0 siblings, 2 replies; 10+ messages in thread
From: Rafael J. Wysocki @ 2016-02-03 0:56 UTC (permalink / raw)
To: Tomas Winkler
Cc: Joe Lawrence, Steven Rostedt, Corey Minyard, LKML, Tomeu Vizoso,
Rafael J. Wysocki
On Sunday, January 31, 2016 11:38:21 PM Tomas Winkler wrote:
> On Fri, Jan 29, 2016 at 11:45 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > On Friday, January 29, 2016 12:56:14 PM Joe Lawrence wrote:
> >> On 01/29/2016 12:01 PM, Steven Rostedt wrote:
> >> > On Thu, Jan 28, 2016 at 02:13:04PM -0600, Corey Minyard wrote:
> >> >> Tomeu, you added that check in
> >> >>
> >> >> [989561de9b5112999475b406557d9c7e9e59c041] PM / Domains: add setter for
> >> >> dev.pm_domain
> >> >>
> >> >> and either something is wrong in the platform device handling or elsewhere
> >> >> in the device code, if
> >> >> that check is valid.
> >> >>
> >> >
> >> > FYI, I'm hitting the exact same error on shutdown on one of my boxes.
> >> >
> >> > Please Cc me on updates.
> >> >
> >> > -- Steve
> >> >
> >> >
> >> > [53591.087861] kvm: exiting hardware virtualization
> >> > [53591.104798] ------------[ cut here ]------------
> >> > [53591.110058] WARNING: CPU: 0 PID: 1 at /home/rostedt/work/git/linux-trace.git/drivers/base/power/common.c:150 dev_pm_domain_set+0x82/0x90()
> >> > [53591.123716] PM domains can only be changed for unbound devices
> >> > [53591.130158] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc bluetooth lockd grace snd_hda_codec_hdmi snd_hda_codec_r
> >> > ealtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core vhost_net tun vhost x86_pkg_temp_thermal iTCO_wdt snd_seq snd_seq_device snd_pcm macvtap coretemp me
> >> > i_me iTCO_vendor_support hp_wmi rfkill sparse_keymap macvlan kvm_intel snd_timer mei lpc_ich snd i2c_i801 soundcore mfd_core kvm irqbypass acpi_cpufreq serio_raw wmi uinput crc32_p
> >> > clmul i915 crc32c_intel i2c_algo_bit e1000e drm_kms_helper ptp drm pps_core i2c_core video sunrpc
> >> > [53591.190440] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.5.0-rc1-test+ #155
> >> > [53591.198453] Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
> >> > [53591.208031] ffff8801195abc90 ffff8801195abc90 ffffffff8143ef63 ffff8801195abcd8
> >> > [53591.216168] ffff8801195abcc8 ffffffff810acad6 ffff8801192d2328 0000000000000000
> >> > [53591.224299] 0000000000000001 ffff8801192d2388 00000000fee1dead ffff8801195abd28
> >> > [53591.232429] Call Trace:
> >> > [53591.235483] [<ffffffff8143ef63>] dump_stack+0x44/0x61
> >> > [53591.241232] [<ffffffff810acad6>] warn_slowpath_common+0x86/0xc0
> >> > [53591.247842] [<ffffffff810acb5c>] warn_slowpath_fmt+0x4c/0x50
> >> > [53591.254193] [<ffffffff810acb15>] ? warn_slowpath_fmt+0x5/0x50
> >> > [53591.260625] [<ffffffff8157cf42>] dev_pm_domain_set+0x82/0x90
> >> > [53591.266970] [<ffffffffa03f255e>] mei_me_remove+0xee/0x120 [mei_me]
> >> > [53591.273842] [<ffffffff8147fe96>] pci_device_shutdown+0x36/0x70
> >> > [53591.280373] [<ffffffff81570680>] device_shutdown+0xe0/0x1e0
> >> > [53591.286642] [<ffffffff810d6df6>] kernel_restart_prepare+0x36/0x40
> >> > [53591.293439] [<ffffffff810d6f62>] kernel_restart+0x12/0x60
> >> > [53591.299543] [<ffffffff810d72ae>] SYSC_reboot+0x1ce/0x1f0
> >> > [53591.305562] [<ffffffffa0008077>] ? 0xffffffffa0008077
> >> > [53591.311323] [<ffffffff811b2e60>] ? stack_trace_call+0x40/0x60
> >> > [53591.317780] [<ffffffffa0008077>] ? 0xffffffffa0008077
> >> > [53591.323552] [<ffffffff8143eeb4>] ? _atomic_dec_and_lock+0x44/0xaf
> >> > [53591.330374] [<ffffffff812a302b>] ? iput+0xbb/0x2c0
> >> > [53591.335880] [<ffffffff810d7325>] ? SyS_reboot+0x5/0x10
> >> > [53591.341748] [<ffffffff81003044>] ? lockdep_sys_exit_thunk+0x12/0x14
> >> > [53591.348743] [<ffffffff810d732e>] SyS_reboot+0xe/0x10
> >> > [53591.354440] [<ffffffff8185ee32>] entry_SYSCALL_64_fastpath+0x12/0x76
> >> > [53591.361534] ---[ end trace 63b298fc6d5920e4 ]---
> >> > [53591.377714] e1000e: EEE TX LPI TIMER: 00000011
> >> > [53591.468245] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> >> > [53591.487321] reboot: Restarting system
> >> > [53591.491679] reboot: machine restart
> >> >
> >>
> >> Looks like Rafael adjusted for the platform shutdown case here:
> >>
> >> https://lkml.org/lkml/2016/1/11/515
> >>
> >> Perhaps that would applicable to the pci shutdown as well?
> >
> > To the MEI driver's shutdown rather. mei_me_remove() clears the pm_domain
> > pointer which is sort of questionable, but then the warning may be overkill
> > for this case.
>
> Since MEI device is running its own power management, in some cases
> we are using PM domains just to avoid going through the PCI runtime
> pm handlers to avoid going to D3. IIRC we couldn't use
> PCI_DEV_FLAGS_NO_D3 as this not unique for runtime handlers
> I think this requirement is unique to the MEI device, so I'm not
> sure it's worth to push it into the PCI layer, maybe we just quite the
> warning somehow.
Does this help: https://patchwork.kernel.org/patch/8170821/ ?
Thanks,
Rafael
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-02-03 0:56 ` Rafael J. Wysocki
@ 2016-02-03 2:48 ` Joe Lawrence
2016-02-03 13:35 ` Steven Rostedt
1 sibling, 0 replies; 10+ messages in thread
From: Joe Lawrence @ 2016-02-03 2:48 UTC (permalink / raw)
To: Rafael J. Wysocki, Tomas Winkler
Cc: Steven Rostedt, Corey Minyard, LKML, Tomeu Vizoso, Rafael J. Wysocki
On 02/02/2016 07:56 PM, Rafael J. Wysocki wrote:
>
> Does this help: https://patchwork.kernel.org/patch/8170821/ ?
No more warnings on ipmi_si removal over here with that patch.
Thanks,
-- Joe
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PM domain change on unbound devices warning on ipmi_si unload
2016-02-03 0:56 ` Rafael J. Wysocki
2016-02-03 2:48 ` Joe Lawrence
@ 2016-02-03 13:35 ` Steven Rostedt
1 sibling, 0 replies; 10+ messages in thread
From: Steven Rostedt @ 2016-02-03 13:35 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Tomas Winkler, Joe Lawrence, Corey Minyard, LKML, Tomeu Vizoso,
Rafael J. Wysocki
On Wed, 03 Feb 2016 01:56:45 +0100
"Rafael J. Wysocki" <rjw@rjwysocki.net> wrote:
> Does this help: https://patchwork.kernel.org/patch/8170821/ ?
Yep!
Tested-by: Steven Rostedt <rostedt@goodmis.org>
-- Steve
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-02-03 13:35 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-28 4:45 PM domain change on unbound devices warning on ipmi_si unload Joe Lawrence
2016-01-28 13:56 ` Corey Minyard
2016-01-28 20:13 ` Corey Minyard
2016-01-29 17:01 ` Steven Rostedt
2016-01-29 17:56 ` Joe Lawrence
2016-01-29 21:45 ` Rafael J. Wysocki
2016-01-31 21:38 ` Tomas Winkler
2016-02-03 0:56 ` Rafael J. Wysocki
2016-02-03 2:48 ` Joe Lawrence
2016-02-03 13:35 ` Steven Rostedt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.