* [PATCH 0/2] powerpc: allow kvm to use kerel debug framework
@ 2013-07-04 6:15 Bharat Bhushan
2013-07-04 6:15 ` Bharat Bhushan
` (2 more replies)
0 siblings, 3 replies; 25+ messages in thread
From: Bharat Bhushan @ 2013-07-04 6:15 UTC (permalink / raw)
To: linuxppc-dev, mikey, benh, linux-kernel, scottwood, agraf; +Cc: Bharat Bhushan
From: Bharat Bhushan <bharat.bhushan@freescale.com>
This patchset moves the debug registers in a structure, which allows
kvm to use same structure for debug emulation.
Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html"
was sent which is a bunch of six patches. That patchset is divided into two parts:
1) powerpc specific changes (These 2 patches are actually have those changes)
2) KVM specific changes (will send separate patch on agraf repository)
Bharat Bhushan (2):
powerpc: remove unnecessary line continuations
powerpc: move debug registers in a structure
arch/powerpc/include/asm/processor.h | 38 +++++----
arch/powerpc/include/asm/reg_booke.h | 8 +-
arch/powerpc/kernel/asm-offsets.c | 2 +-
arch/powerpc/kernel/process.c | 42 +++++-----
arch/powerpc/kernel/ptrace.c | 154 +++++++++++++++++-----------------
arch/powerpc/kernel/ptrace32.c | 2 +-
arch/powerpc/kernel/signal_32.c | 6 +-
arch/powerpc/kernel/traps.c | 35 ++++----
8 files changed, 147 insertions(+), 140 deletions(-)
^ permalink raw reply [flat|nested] 25+ messages in thread* [PATCH 1/2] powerpc: remove unnecessary line continuations 2013-07-04 6:15 [PATCH 0/2] powerpc: allow kvm to use kerel debug framework Bharat Bhushan @ 2013-07-04 6:15 ` Bharat Bhushan 2013-07-04 6:15 ` Bharat Bhushan 2013-07-09 1:00 ` Alexander Graf 2 siblings, 0 replies; 25+ messages in thread From: Bharat Bhushan @ 2013-07-04 6:15 UTC (permalink / raw) To: linuxppc-dev, mikey, benh, linux-kernel, scottwood, agraf Cc: Bharat Bhushan, Bharat Bhushan Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> --- arch/powerpc/kernel/process.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index c517dbe..19b8733 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -325,7 +325,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread) /* * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) */ - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | \ + thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | DBCR1_IAC3US | DBCR1_IAC4US; /* * Force Data Address Compare User/Supervisor bits to be User-only -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 1/2] powerpc: remove unnecessary line continuations @ 2013-07-04 6:15 ` Bharat Bhushan 0 siblings, 0 replies; 25+ messages in thread From: Bharat Bhushan @ 2013-07-04 6:15 UTC (permalink / raw) To: linuxppc-dev, mikey, benh, linux-kernel, scottwood, agraf; +Cc: Bharat Bhushan Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> --- arch/powerpc/kernel/process.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index c517dbe..19b8733 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -325,7 +325,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread) /* * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) */ - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | \ + thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | DBCR1_IAC3US | DBCR1_IAC4US; /* * Force Data Address Compare User/Supervisor bits to be User-only -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 1/2] powerpc: remove unnecessary line continuations 2013-07-04 6:15 ` Bharat Bhushan @ 2013-07-10 7:25 ` Michael Neuling -1 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-10 7:25 UTC (permalink / raw) To: Bharat Bhushan Cc: linuxppc-dev, benh, linux-kernel, scottwood, agraf, Bharat Bhushan Bharat Bhushan <r65777@freescale.com> wrote: > Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> > --- > arch/powerpc/kernel/process.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c > index c517dbe..19b8733 100644 > --- a/arch/powerpc/kernel/process.c > +++ b/arch/powerpc/kernel/process.c > @@ -325,7 +325,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread) > /* > * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) > */ > - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | \ > + thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | > DBCR1_IAC3US | DBCR1_IAC4US; > /* > * Force Data Address Compare User/Supervisor bits to be User-only > -- > 1.7.0.4 > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/2] powerpc: remove unnecessary line continuations @ 2013-07-10 7:25 ` Michael Neuling 0 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-10 7:25 UTC (permalink / raw) To: Bharat Bhushan Cc: linux-kernel, agraf, Bharat Bhushan, scottwood, linuxppc-dev Bharat Bhushan <r65777@freescale.com> wrote: > Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> > --- > arch/powerpc/kernel/process.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c > index c517dbe..19b8733 100644 > --- a/arch/powerpc/kernel/process.c > +++ b/arch/powerpc/kernel/process.c > @@ -325,7 +325,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread) > /* > * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) > */ > - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | \ > + thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | > DBCR1_IAC3US | DBCR1_IAC4US; > /* > * Force Data Address Compare User/Supervisor bits to be User-only > -- > 1.7.0.4 > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 2/2] powerpc: move debug registers in a structure 2013-07-04 6:15 [PATCH 0/2] powerpc: allow kvm to use kerel debug framework Bharat Bhushan @ 2013-07-04 6:15 ` Bharat Bhushan 2013-07-04 6:15 ` Bharat Bhushan 2013-07-09 1:00 ` Alexander Graf 2 siblings, 0 replies; 25+ messages in thread From: Bharat Bhushan @ 2013-07-04 6:15 UTC (permalink / raw) To: linuxppc-dev, mikey, benh, linux-kernel, scottwood, agraf Cc: Bharat Bhushan, Bharat Bhushan This way we can use same data type struct with KVM and also help in using other debug related function. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> --- arch/powerpc/include/asm/processor.h | 38 +++++---- arch/powerpc/include/asm/reg_booke.h | 8 +- arch/powerpc/kernel/asm-offsets.c | 2 +- arch/powerpc/kernel/process.c | 42 +++++----- arch/powerpc/kernel/ptrace.c | 154 +++++++++++++++++----------------- arch/powerpc/kernel/ptrace32.c | 2 +- arch/powerpc/kernel/signal_32.c | 6 +- arch/powerpc/kernel/traps.c | 35 ++++---- 8 files changed, 147 insertions(+), 140 deletions(-) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 47a35b0..9e9aa26 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -147,22 +147,7 @@ typedef struct { #define TS_FPR(i) fpr[i][TS_FPROFFSET] #define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET] -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ - -#ifdef CONFIG_PPC64 - unsigned long ksp_vsid; -#endif - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ -#ifdef CONFIG_BOOKE - /* BookE base exception scratch space; align on cacheline */ - unsigned long normsave[8] ____cacheline_aligned; -#endif -#ifdef CONFIG_PPC32 - void *pgdir; /* root of page-table tree */ -#endif +struct debug_reg { #ifdef CONFIG_PPC_ADV_DEBUG_REGS /* * The following help to manage the use of Debug Control Registers @@ -199,6 +184,27 @@ struct thread_struct { unsigned long dvc2; #endif #endif +}; + +struct thread_struct { + unsigned long ksp; /* Kernel stack pointer */ + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ + +#ifdef CONFIG_PPC64 + unsigned long ksp_vsid; +#endif + struct pt_regs *regs; /* Pointer to saved register state */ + mm_segment_t fs; /* for get_fs() validation */ +#ifdef CONFIG_BOOKE + /* BookE base exception scratch space; align on cacheline */ + unsigned long normsave[8] ____cacheline_aligned; +#endif +#ifdef CONFIG_PPC32 + void *pgdir; /* root of page-table tree */ +#endif + /* Debug Registers */ + struct debug_reg debug; + /* FP and VSX 0-31 register set */ double fpr[32][TS_FPRWIDTH] __attribute__((aligned(16))); struct { diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index b417de3..455dc89 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -381,7 +381,7 @@ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ -#define dbcr_iac_range(task) ((task)->thread.dbcr0) +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) #define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ #define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ #define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ @@ -395,7 +395,7 @@ #define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ #define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ -#define dbcr_dac(task) ((task)->thread.dbcr1) +#define dbcr_dac(task) ((task)->thread.debug.dbcr1) #define DBCR_DAC1R DBCR1_DAC1R #define DBCR_DAC1W DBCR1_DAC1W #define DBCR_DAC2R DBCR1_DAC2R @@ -441,7 +441,7 @@ #define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ -#define dbcr_dac(task) ((task)->thread.dbcr0) +#define dbcr_dac(task) ((task)->thread.debug.dbcr0) #define DBCR_DAC1R DBCR0_DAC1R #define DBCR_DAC1W DBCR0_DAC1W #define DBCR_DAC2R DBCR0_DAC2R @@ -475,7 +475,7 @@ #define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ #define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ -#define dbcr_iac_range(task) ((task)->thread.dbcr1) +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr1) #define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */ #define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */ #define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index c7e8afc..d56727c 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -113,7 +113,7 @@ int main(void) #endif /* CONFIG_SPE */ #endif /* CONFIG_PPC64 */ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); + DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, debug.dbcr0)); #endif #ifdef CONFIG_KVM_BOOK3S_32_HANDLER DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu)); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 19b8733..f8ae5e3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -312,28 +312,28 @@ static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); */ static void set_debug_reg_defaults(struct thread_struct *thread) { - thread->iac1 = thread->iac2 = 0; + thread->debug.iac1 = thread->debug.iac2 = 0; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 - thread->iac3 = thread->iac4 = 0; + thread->debug.iac3 = thread->debug.iac4 = 0; #endif - thread->dac1 = thread->dac2 = 0; + thread->debug.dac1 = thread->debug.dac2 = 0; #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - thread->dvc1 = thread->dvc2 = 0; + thread->debug.dvc1 = thread->debug.dvc2 = 0; #endif - thread->dbcr0 = 0; + thread->debug.dbcr0 = 0; #ifdef CONFIG_BOOKE /* * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) */ - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | + thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | DBCR1_IAC3US | DBCR1_IAC4US; /* * Force Data Address Compare User/Supervisor bits to be User-only * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. */ - thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; + thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; #else - thread->dbcr1 = 0; + thread->debug.dbcr1 = 0; #endif } @@ -346,22 +346,22 @@ static void prime_debug_regs(struct thread_struct *thread) */ mtmsr(mfmsr() & ~MSR_DE); - mtspr(SPRN_IAC1, thread->iac1); - mtspr(SPRN_IAC2, thread->iac2); + mtspr(SPRN_IAC1, thread->debug.iac1); + mtspr(SPRN_IAC2, thread->debug.iac2); #if CONFIG_PPC_ADV_DEBUG_IACS > 2 - mtspr(SPRN_IAC3, thread->iac3); - mtspr(SPRN_IAC4, thread->iac4); + mtspr(SPRN_IAC3, thread->debug.iac3); + mtspr(SPRN_IAC4, thread->debug.iac4); #endif - mtspr(SPRN_DAC1, thread->dac1); - mtspr(SPRN_DAC2, thread->dac2); + mtspr(SPRN_DAC1, thread->debug.dac1); + mtspr(SPRN_DAC2, thread->debug.dac2); #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - mtspr(SPRN_DVC1, thread->dvc1); - mtspr(SPRN_DVC2, thread->dvc2); + mtspr(SPRN_DVC1, thread->debug.dvc1); + mtspr(SPRN_DVC2, thread->debug.dvc2); #endif - mtspr(SPRN_DBCR0, thread->dbcr0); - mtspr(SPRN_DBCR1, thread->dbcr1); + mtspr(SPRN_DBCR0, thread->debug.dbcr0); + mtspr(SPRN_DBCR1, thread->debug.dbcr1); #ifdef CONFIG_BOOKE - mtspr(SPRN_DBCR2, thread->dbcr2); + mtspr(SPRN_DBCR2, thread->debug.dbcr2); #endif } /* @@ -371,8 +371,8 @@ static void prime_debug_regs(struct thread_struct *thread) */ static void switch_booke_debug_regs(struct thread_struct *new_thread) { - if ((current->thread.dbcr0 & DBCR0_IDM) - || (new_thread->dbcr0 & DBCR0_IDM)) + if ((current->thread.debug.dbcr0 & DBCR0_IDM) + || (new_thread->debug.dbcr0 & DBCR0_IDM)) prime_debug_regs(new_thread); } #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 64f7bd5..9bb0b8a 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -854,8 +854,8 @@ void user_enable_single_step(struct task_struct *task) if (regs != NULL) { #ifdef CONFIG_PPC_ADV_DEBUG_REGS - task->thread.dbcr0 &= ~DBCR0_BT; - task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; + task->thread.debug.dbcr0 &= ~DBCR0_BT; + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; #else regs->msr &= ~MSR_BE; @@ -871,8 +871,8 @@ void user_enable_block_step(struct task_struct *task) if (regs != NULL) { #ifdef CONFIG_PPC_ADV_DEBUG_REGS - task->thread.dbcr0 &= ~DBCR0_IC; - task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; + task->thread.debug.dbcr0 &= ~DBCR0_IC; + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT; regs->msr |= MSR_DE; #else regs->msr &= ~MSR_SE; @@ -894,16 +894,16 @@ void user_disable_single_step(struct task_struct *task) * And, after doing so, if all debug flags are off, turn * off DBCR0(IDM) and MSR(DE) .... Torez */ - task->thread.dbcr0 &= ~DBCR0_IC; + task->thread.debug.dbcr0 &= ~DBCR0_IC; /* * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set. */ - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, - task->thread.dbcr1)) { + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, + task->thread.debug.dbcr1)) { /* * All debug events were off..... */ - task->thread.dbcr0 &= ~DBCR0_IDM; + task->thread.debug.dbcr0 &= ~DBCR0_IDM; regs->msr &= ~MSR_DE; } #else @@ -1031,14 +1031,14 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, */ /* DAC's hold the whole address without any mode flags */ - task->thread.dac1 = data & ~0x3UL; + task->thread.debug.dac1 = data & ~0x3UL; - if (task->thread.dac1 == 0) { + if (task->thread.debug.dac1 == 0) { dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, - task->thread.dbcr1)) { + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, + task->thread.debug.dbcr1)) { task->thread.regs->msr &= ~MSR_DE; - task->thread.dbcr0 &= ~DBCR0_IDM; + task->thread.debug.dbcr0 &= ~DBCR0_IDM; } return 0; } @@ -1050,7 +1050,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */ - task->thread.dbcr0 |= DBCR0_IDM; + task->thread.debug.dbcr0 |= DBCR0_IDM; /* Check for write and read flags and set DBCR0 accordingly */ @@ -1080,10 +1080,10 @@ static long set_instruction_bp(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) { int slot; - int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0); - int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0); - int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0); - int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0); + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0); + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0); + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0); + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0); if (dbcr_iac_range(child) & DBCR_IAC12MODE) slot2_in_use = 1; @@ -1102,9 +1102,9 @@ static long set_instruction_bp(struct task_struct *child, /* We need a pair of IAC regsisters */ if ((!slot1_in_use) && (!slot2_in_use)) { slot = 1; - child->thread.iac1 = bp_info->addr; - child->thread.iac2 = bp_info->addr2; - child->thread.dbcr0 |= DBCR0_IAC1; + child->thread.debug.iac1 = bp_info->addr; + child->thread.debug.iac2 = bp_info->addr2; + child->thread.debug.dbcr0 |= DBCR0_IAC1; if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) dbcr_iac_range(child) |= DBCR_IAC12X; @@ -1113,9 +1113,9 @@ static long set_instruction_bp(struct task_struct *child, #if CONFIG_PPC_ADV_DEBUG_IACS > 2 } else if ((!slot3_in_use) && (!slot4_in_use)) { slot = 3; - child->thread.iac3 = bp_info->addr; - child->thread.iac4 = bp_info->addr2; - child->thread.dbcr0 |= DBCR0_IAC3; + child->thread.debug.iac3 = bp_info->addr; + child->thread.debug.iac4 = bp_info->addr2; + child->thread.debug.dbcr0 |= DBCR0_IAC3; if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) dbcr_iac_range(child) |= DBCR_IAC34X; @@ -1135,30 +1135,30 @@ static long set_instruction_bp(struct task_struct *child, */ if (slot2_in_use || (slot3_in_use == slot4_in_use)) { slot = 1; - child->thread.iac1 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC1; + child->thread.debug.iac1 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC1; goto out; } } if (!slot2_in_use) { slot = 2; - child->thread.iac2 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC2; + child->thread.debug.iac2 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC2; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 } else if (!slot3_in_use) { slot = 3; - child->thread.iac3 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC3; + child->thread.debug.iac3 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC3; } else if (!slot4_in_use) { slot = 4; - child->thread.iac4 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC4; + child->thread.debug.iac4 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC4; #endif } else return -ENOSPC; } out: - child->thread.dbcr0 |= DBCR0_IDM; + child->thread.debug.dbcr0 |= DBCR0_IDM; child->thread.regs->msr |= MSR_DE; return slot; @@ -1168,49 +1168,49 @@ static int del_instruction_bp(struct task_struct *child, int slot) { switch (slot) { case 1: - if ((child->thread.dbcr0 & DBCR0_IAC1) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC12MODE) { /* address range - clear slots 1 & 2 */ - child->thread.iac2 = 0; + child->thread.debug.iac2 = 0; dbcr_iac_range(child) &= ~DBCR_IAC12MODE; } - child->thread.iac1 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC1; + child->thread.debug.iac1 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC1; break; case 2: - if ((child->thread.dbcr0 & DBCR0_IAC2) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC12MODE) /* used in a range */ return -EINVAL; - child->thread.iac2 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC2; + child->thread.debug.iac2 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC2; break; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 case 3: - if ((child->thread.dbcr0 & DBCR0_IAC3) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC34MODE) { /* address range - clear slots 3 & 4 */ - child->thread.iac4 = 0; + child->thread.debug.iac4 = 0; dbcr_iac_range(child) &= ~DBCR_IAC34MODE; } - child->thread.iac3 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC3; + child->thread.debug.iac3 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC3; break; case 4: - if ((child->thread.dbcr0 & DBCR0_IAC4) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC34MODE) /* Used in a range */ return -EINVAL; - child->thread.iac4 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC4; + child->thread.debug.iac4 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC4; break; #endif default: @@ -1240,18 +1240,18 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) dbcr_dac(child) |= DBCR_DAC1R; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) dbcr_dac(child) |= DBCR_DAC1W; - child->thread.dac1 = (unsigned long)bp_info->addr; + child->thread.debug.dac1 = (unsigned long)bp_info->addr; #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 if (byte_enable) { - child->thread.dvc1 = + child->thread.debug.dvc1 = (unsigned long)bp_info->condition_value; - child->thread.dbcr2 |= + child->thread.debug.dbcr2 |= ((byte_enable << DBCR2_DVC1BE_SHIFT) | (condition_mode << DBCR2_DVC1M_SHIFT)); } #endif #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - } else if (child->thread.dbcr2 & DBCR2_DAC12MODE) { + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { /* Both dac1 and dac2 are part of a range */ return -ENOSPC; #endif @@ -1261,19 +1261,19 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) dbcr_dac(child) |= DBCR_DAC2R; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) dbcr_dac(child) |= DBCR_DAC2W; - child->thread.dac2 = (unsigned long)bp_info->addr; + child->thread.debug.dac2 = (unsigned long)bp_info->addr; #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 if (byte_enable) { - child->thread.dvc2 = + child->thread.debug.dvc2 = (unsigned long)bp_info->condition_value; - child->thread.dbcr2 |= + child->thread.debug.dbcr2 |= ((byte_enable << DBCR2_DVC2BE_SHIFT) | (condition_mode << DBCR2_DVC2M_SHIFT)); } #endif } else return -ENOSPC; - child->thread.dbcr0 |= DBCR0_IDM; + child->thread.debug.dbcr0 |= DBCR0_IDM; child->thread.regs->msr |= MSR_DE; return slot + 4; @@ -1285,32 +1285,32 @@ static int del_dac(struct task_struct *child, int slot) if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) return -ENOENT; - child->thread.dac1 = 0; + child->thread.debug.dac1 = 0; dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W); #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - if (child->thread.dbcr2 & DBCR2_DAC12MODE) { - child->thread.dac2 = 0; - child->thread.dbcr2 &= ~DBCR2_DAC12MODE; + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { + child->thread.debug.dac2 = 0; + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; } - child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); #endif #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - child->thread.dvc1 = 0; + child->thread.debug.dvc1 = 0; #endif } else if (slot == 2) { if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) return -ENOENT; #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - if (child->thread.dbcr2 & DBCR2_DAC12MODE) + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) /* Part of a range */ return -EINVAL; - child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); #endif #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - child->thread.dvc2 = 0; + child->thread.debug.dvc2 = 0; #endif - child->thread.dac2 = 0; + child->thread.debug.dac2 = 0; dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W); } else return -EINVAL; @@ -1352,22 +1352,22 @@ static int set_dac_range(struct task_struct *child, return -EIO; } - if (child->thread.dbcr0 & + if (child->thread.debug.dbcr0 & (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)) return -ENOSPC; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) - child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) - child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); - child->thread.dac1 = bp_info->addr; - child->thread.dac2 = bp_info->addr2; + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); + child->thread.debug.dac1 = bp_info->addr; + child->thread.debug.dac2 = bp_info->addr2; if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) - child->thread.dbcr2 |= DBCR2_DAC12M; + child->thread.debug.dbcr2 |= DBCR2_DAC12M; else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) - child->thread.dbcr2 |= DBCR2_DAC12MX; + child->thread.debug.dbcr2 |= DBCR2_DAC12MX; else /* PPC_BREAKPOINT_MODE_MASK */ - child->thread.dbcr2 |= DBCR2_DAC12MM; + child->thread.debug.dbcr2 |= DBCR2_DAC12MM; child->thread.regs->msr |= MSR_DE; return 5; @@ -1507,9 +1507,9 @@ static long ppc_del_hwdebug(struct task_struct *child, long data) rc = del_dac(child, (int)data - 4); if (!rc) { - if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0, - child->thread.dbcr1)) { - child->thread.dbcr0 &= ~DBCR0_IDM; + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0, + child->thread.debug.dbcr1)) { + child->thread.debug.dbcr0 &= ~DBCR0_IDM; child->thread.regs->msr &= ~MSR_DE; } } @@ -1691,7 +1691,7 @@ long arch_ptrace(struct task_struct *child, long request, if (addr > 0) break; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - ret = put_user(child->thread.dac1, datalp); + ret = put_user(child->thread.debug.dac1, datalp); #else dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | (child->thread.hw_brk.type & HW_BRK_TYPE_DABR)); diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index f51599e..18c7c65 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -269,7 +269,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, if (addr > 0) break; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - ret = put_user(child->thread.dac1, (u32 __user *)data); + ret = put_user(child->thread.debug.dac1, (u32 __user *)data); #else dabr_fake = ( (child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 0f83122..f5be6f1 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1300,7 +1300,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, unsigned char tmp; unsigned long new_msr = regs->msr; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - unsigned long new_dbcr0 = current->thread.dbcr0; + unsigned long new_dbcr0 = current->thread.debug.dbcr0; #endif for (i=0; i<ndbg; i++) { @@ -1315,7 +1315,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, } else { new_dbcr0 &= ~DBCR0_IC; if (!DBCR_ACTIVE_EVENTS(new_dbcr0, - current->thread.dbcr1)) { + current->thread.debug.dbcr1)) { new_msr &= ~MSR_DE; new_dbcr0 &= ~DBCR0_IDM; } @@ -1350,7 +1350,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, the user is really doing something wrong. */ regs->msr = new_msr; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - current->thread.dbcr0 = new_dbcr0; + current->thread.debug.dbcr0 = new_dbcr0; #endif if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index bf33c22..1998685 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -352,8 +352,8 @@ static inline int check_io_access(struct pt_regs *regs) #define REASON_TRAP ESR_PTR /* single-step stuff */ -#define single_stepping(regs) (current->thread.dbcr0 & DBCR0_IC) -#define clear_single_step(regs) (current->thread.dbcr0 &= ~DBCR0_IC) +#define single_stepping(regs) (current->thread.debug.dbcr0 & DBCR0_IC) +#define clear_single_step(regs) (current->thread.debug.dbcr0 &= ~DBCR0_IC) #else /* On non-4xx, the reason for the machine check or program @@ -1485,7 +1485,7 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W); #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - current->thread.dbcr2 &= ~DBCR2_DAC12MODE; + current->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; #endif do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT, 5); @@ -1496,24 +1496,24 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) 6); changed |= 0x01; } else if (debug_status & DBSR_IAC1) { - current->thread.dbcr0 &= ~DBCR0_IAC1; + current->thread.debug.dbcr0 &= ~DBCR0_IAC1; dbcr_iac_range(current) &= ~DBCR_IAC12MODE; do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT, 1); changed |= 0x01; } else if (debug_status & DBSR_IAC2) { - current->thread.dbcr0 &= ~DBCR0_IAC2; + current->thread.debug.dbcr0 &= ~DBCR0_IAC2; do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT, 2); changed |= 0x01; } else if (debug_status & DBSR_IAC3) { - current->thread.dbcr0 &= ~DBCR0_IAC3; + current->thread.debug.dbcr0 &= ~DBCR0_IAC3; dbcr_iac_range(current) &= ~DBCR_IAC34MODE; do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT, 3); changed |= 0x01; } else if (debug_status & DBSR_IAC4) { - current->thread.dbcr0 &= ~DBCR0_IAC4; + current->thread.debug.dbcr0 &= ~DBCR0_IAC4; do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT, 4); changed |= 0x01; @@ -1523,19 +1523,20 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) * Check all other debug flags and see if that bit needs to be turned * back on or not. */ - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, + current->thread.debug.dbcr1)) regs->msr |= MSR_DE; else /* Make sure the IDM flag is off */ - current->thread.dbcr0 &= ~DBCR0_IDM; + current->thread.debug.dbcr0 &= ~DBCR0_IDM; if (changed & 0x01) - mtspr(SPRN_DBCR0, current->thread.dbcr0); + mtspr(SPRN_DBCR0, current->thread.debug.dbcr0); } void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) { - current->thread.dbsr = debug_status; + current->thread.debug.dbsr = debug_status; /* Hack alert: On BookE, Branch Taken stops on the branch itself, while * on server, it stops on the target of the branch. In order to simulate @@ -1552,8 +1553,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) /* Do the single step trick only when coming from userspace */ if (user_mode(regs)) { - current->thread.dbcr0 &= ~DBCR0_BT; - current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; + current->thread.debug.dbcr0 &= ~DBCR0_BT; + current->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; return; } @@ -1581,13 +1582,13 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) return; if (user_mode(regs)) { - current->thread.dbcr0 &= ~DBCR0_IC; - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, - current->thread.dbcr1)) + current->thread.debug.dbcr0 &= ~DBCR0_IC; + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, + current->thread.debug.dbcr1)) regs->msr |= MSR_DE; else /* Make sure the IDM bit is off */ - current->thread.dbcr0 &= ~DBCR0_IDM; + current->thread.debug.dbcr0 &= ~DBCR0_IDM; } _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/2] powerpc: move debug registers in a structure @ 2013-07-04 6:15 ` Bharat Bhushan 0 siblings, 0 replies; 25+ messages in thread From: Bharat Bhushan @ 2013-07-04 6:15 UTC (permalink / raw) To: linuxppc-dev, mikey, benh, linux-kernel, scottwood, agraf; +Cc: Bharat Bhushan This way we can use same data type struct with KVM and also help in using other debug related function. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> --- arch/powerpc/include/asm/processor.h | 38 +++++---- arch/powerpc/include/asm/reg_booke.h | 8 +- arch/powerpc/kernel/asm-offsets.c | 2 +- arch/powerpc/kernel/process.c | 42 +++++----- arch/powerpc/kernel/ptrace.c | 154 +++++++++++++++++----------------- arch/powerpc/kernel/ptrace32.c | 2 +- arch/powerpc/kernel/signal_32.c | 6 +- arch/powerpc/kernel/traps.c | 35 ++++---- 8 files changed, 147 insertions(+), 140 deletions(-) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 47a35b0..9e9aa26 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -147,22 +147,7 @@ typedef struct { #define TS_FPR(i) fpr[i][TS_FPROFFSET] #define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET] -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ - -#ifdef CONFIG_PPC64 - unsigned long ksp_vsid; -#endif - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ -#ifdef CONFIG_BOOKE - /* BookE base exception scratch space; align on cacheline */ - unsigned long normsave[8] ____cacheline_aligned; -#endif -#ifdef CONFIG_PPC32 - void *pgdir; /* root of page-table tree */ -#endif +struct debug_reg { #ifdef CONFIG_PPC_ADV_DEBUG_REGS /* * The following help to manage the use of Debug Control Registers @@ -199,6 +184,27 @@ struct thread_struct { unsigned long dvc2; #endif #endif +}; + +struct thread_struct { + unsigned long ksp; /* Kernel stack pointer */ + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ + +#ifdef CONFIG_PPC64 + unsigned long ksp_vsid; +#endif + struct pt_regs *regs; /* Pointer to saved register state */ + mm_segment_t fs; /* for get_fs() validation */ +#ifdef CONFIG_BOOKE + /* BookE base exception scratch space; align on cacheline */ + unsigned long normsave[8] ____cacheline_aligned; +#endif +#ifdef CONFIG_PPC32 + void *pgdir; /* root of page-table tree */ +#endif + /* Debug Registers */ + struct debug_reg debug; + /* FP and VSX 0-31 register set */ double fpr[32][TS_FPRWIDTH] __attribute__((aligned(16))); struct { diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index b417de3..455dc89 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -381,7 +381,7 @@ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ -#define dbcr_iac_range(task) ((task)->thread.dbcr0) +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) #define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ #define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ #define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ @@ -395,7 +395,7 @@ #define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ #define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ -#define dbcr_dac(task) ((task)->thread.dbcr1) +#define dbcr_dac(task) ((task)->thread.debug.dbcr1) #define DBCR_DAC1R DBCR1_DAC1R #define DBCR_DAC1W DBCR1_DAC1W #define DBCR_DAC2R DBCR1_DAC2R @@ -441,7 +441,7 @@ #define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ -#define dbcr_dac(task) ((task)->thread.dbcr0) +#define dbcr_dac(task) ((task)->thread.debug.dbcr0) #define DBCR_DAC1R DBCR0_DAC1R #define DBCR_DAC1W DBCR0_DAC1W #define DBCR_DAC2R DBCR0_DAC2R @@ -475,7 +475,7 @@ #define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ #define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ -#define dbcr_iac_range(task) ((task)->thread.dbcr1) +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr1) #define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */ #define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */ #define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index c7e8afc..d56727c 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -113,7 +113,7 @@ int main(void) #endif /* CONFIG_SPE */ #endif /* CONFIG_PPC64 */ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); + DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, debug.dbcr0)); #endif #ifdef CONFIG_KVM_BOOK3S_32_HANDLER DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu)); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 19b8733..f8ae5e3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -312,28 +312,28 @@ static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); */ static void set_debug_reg_defaults(struct thread_struct *thread) { - thread->iac1 = thread->iac2 = 0; + thread->debug.iac1 = thread->debug.iac2 = 0; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 - thread->iac3 = thread->iac4 = 0; + thread->debug.iac3 = thread->debug.iac4 = 0; #endif - thread->dac1 = thread->dac2 = 0; + thread->debug.dac1 = thread->debug.dac2 = 0; #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - thread->dvc1 = thread->dvc2 = 0; + thread->debug.dvc1 = thread->debug.dvc2 = 0; #endif - thread->dbcr0 = 0; + thread->debug.dbcr0 = 0; #ifdef CONFIG_BOOKE /* * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) */ - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | + thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | DBCR1_IAC3US | DBCR1_IAC4US; /* * Force Data Address Compare User/Supervisor bits to be User-only * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. */ - thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; + thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; #else - thread->dbcr1 = 0; + thread->debug.dbcr1 = 0; #endif } @@ -346,22 +346,22 @@ static void prime_debug_regs(struct thread_struct *thread) */ mtmsr(mfmsr() & ~MSR_DE); - mtspr(SPRN_IAC1, thread->iac1); - mtspr(SPRN_IAC2, thread->iac2); + mtspr(SPRN_IAC1, thread->debug.iac1); + mtspr(SPRN_IAC2, thread->debug.iac2); #if CONFIG_PPC_ADV_DEBUG_IACS > 2 - mtspr(SPRN_IAC3, thread->iac3); - mtspr(SPRN_IAC4, thread->iac4); + mtspr(SPRN_IAC3, thread->debug.iac3); + mtspr(SPRN_IAC4, thread->debug.iac4); #endif - mtspr(SPRN_DAC1, thread->dac1); - mtspr(SPRN_DAC2, thread->dac2); + mtspr(SPRN_DAC1, thread->debug.dac1); + mtspr(SPRN_DAC2, thread->debug.dac2); #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - mtspr(SPRN_DVC1, thread->dvc1); - mtspr(SPRN_DVC2, thread->dvc2); + mtspr(SPRN_DVC1, thread->debug.dvc1); + mtspr(SPRN_DVC2, thread->debug.dvc2); #endif - mtspr(SPRN_DBCR0, thread->dbcr0); - mtspr(SPRN_DBCR1, thread->dbcr1); + mtspr(SPRN_DBCR0, thread->debug.dbcr0); + mtspr(SPRN_DBCR1, thread->debug.dbcr1); #ifdef CONFIG_BOOKE - mtspr(SPRN_DBCR2, thread->dbcr2); + mtspr(SPRN_DBCR2, thread->debug.dbcr2); #endif } /* @@ -371,8 +371,8 @@ static void prime_debug_regs(struct thread_struct *thread) */ static void switch_booke_debug_regs(struct thread_struct *new_thread) { - if ((current->thread.dbcr0 & DBCR0_IDM) - || (new_thread->dbcr0 & DBCR0_IDM)) + if ((current->thread.debug.dbcr0 & DBCR0_IDM) + || (new_thread->debug.dbcr0 & DBCR0_IDM)) prime_debug_regs(new_thread); } #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 64f7bd5..9bb0b8a 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -854,8 +854,8 @@ void user_enable_single_step(struct task_struct *task) if (regs != NULL) { #ifdef CONFIG_PPC_ADV_DEBUG_REGS - task->thread.dbcr0 &= ~DBCR0_BT; - task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; + task->thread.debug.dbcr0 &= ~DBCR0_BT; + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; #else regs->msr &= ~MSR_BE; @@ -871,8 +871,8 @@ void user_enable_block_step(struct task_struct *task) if (regs != NULL) { #ifdef CONFIG_PPC_ADV_DEBUG_REGS - task->thread.dbcr0 &= ~DBCR0_IC; - task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; + task->thread.debug.dbcr0 &= ~DBCR0_IC; + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT; regs->msr |= MSR_DE; #else regs->msr &= ~MSR_SE; @@ -894,16 +894,16 @@ void user_disable_single_step(struct task_struct *task) * And, after doing so, if all debug flags are off, turn * off DBCR0(IDM) and MSR(DE) .... Torez */ - task->thread.dbcr0 &= ~DBCR0_IC; + task->thread.debug.dbcr0 &= ~DBCR0_IC; /* * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set. */ - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, - task->thread.dbcr1)) { + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, + task->thread.debug.dbcr1)) { /* * All debug events were off..... */ - task->thread.dbcr0 &= ~DBCR0_IDM; + task->thread.debug.dbcr0 &= ~DBCR0_IDM; regs->msr &= ~MSR_DE; } #else @@ -1031,14 +1031,14 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, */ /* DAC's hold the whole address without any mode flags */ - task->thread.dac1 = data & ~0x3UL; + task->thread.debug.dac1 = data & ~0x3UL; - if (task->thread.dac1 == 0) { + if (task->thread.debug.dac1 == 0) { dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, - task->thread.dbcr1)) { + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, + task->thread.debug.dbcr1)) { task->thread.regs->msr &= ~MSR_DE; - task->thread.dbcr0 &= ~DBCR0_IDM; + task->thread.debug.dbcr0 &= ~DBCR0_IDM; } return 0; } @@ -1050,7 +1050,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */ - task->thread.dbcr0 |= DBCR0_IDM; + task->thread.debug.dbcr0 |= DBCR0_IDM; /* Check for write and read flags and set DBCR0 accordingly */ @@ -1080,10 +1080,10 @@ static long set_instruction_bp(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) { int slot; - int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0); - int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0); - int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0); - int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0); + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0); + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0); + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0); + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0); if (dbcr_iac_range(child) & DBCR_IAC12MODE) slot2_in_use = 1; @@ -1102,9 +1102,9 @@ static long set_instruction_bp(struct task_struct *child, /* We need a pair of IAC regsisters */ if ((!slot1_in_use) && (!slot2_in_use)) { slot = 1; - child->thread.iac1 = bp_info->addr; - child->thread.iac2 = bp_info->addr2; - child->thread.dbcr0 |= DBCR0_IAC1; + child->thread.debug.iac1 = bp_info->addr; + child->thread.debug.iac2 = bp_info->addr2; + child->thread.debug.dbcr0 |= DBCR0_IAC1; if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) dbcr_iac_range(child) |= DBCR_IAC12X; @@ -1113,9 +1113,9 @@ static long set_instruction_bp(struct task_struct *child, #if CONFIG_PPC_ADV_DEBUG_IACS > 2 } else if ((!slot3_in_use) && (!slot4_in_use)) { slot = 3; - child->thread.iac3 = bp_info->addr; - child->thread.iac4 = bp_info->addr2; - child->thread.dbcr0 |= DBCR0_IAC3; + child->thread.debug.iac3 = bp_info->addr; + child->thread.debug.iac4 = bp_info->addr2; + child->thread.debug.dbcr0 |= DBCR0_IAC3; if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) dbcr_iac_range(child) |= DBCR_IAC34X; @@ -1135,30 +1135,30 @@ static long set_instruction_bp(struct task_struct *child, */ if (slot2_in_use || (slot3_in_use == slot4_in_use)) { slot = 1; - child->thread.iac1 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC1; + child->thread.debug.iac1 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC1; goto out; } } if (!slot2_in_use) { slot = 2; - child->thread.iac2 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC2; + child->thread.debug.iac2 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC2; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 } else if (!slot3_in_use) { slot = 3; - child->thread.iac3 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC3; + child->thread.debug.iac3 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC3; } else if (!slot4_in_use) { slot = 4; - child->thread.iac4 = bp_info->addr; - child->thread.dbcr0 |= DBCR0_IAC4; + child->thread.debug.iac4 = bp_info->addr; + child->thread.debug.dbcr0 |= DBCR0_IAC4; #endif } else return -ENOSPC; } out: - child->thread.dbcr0 |= DBCR0_IDM; + child->thread.debug.dbcr0 |= DBCR0_IDM; child->thread.regs->msr |= MSR_DE; return slot; @@ -1168,49 +1168,49 @@ static int del_instruction_bp(struct task_struct *child, int slot) { switch (slot) { case 1: - if ((child->thread.dbcr0 & DBCR0_IAC1) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC12MODE) { /* address range - clear slots 1 & 2 */ - child->thread.iac2 = 0; + child->thread.debug.iac2 = 0; dbcr_iac_range(child) &= ~DBCR_IAC12MODE; } - child->thread.iac1 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC1; + child->thread.debug.iac1 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC1; break; case 2: - if ((child->thread.dbcr0 & DBCR0_IAC2) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC12MODE) /* used in a range */ return -EINVAL; - child->thread.iac2 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC2; + child->thread.debug.iac2 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC2; break; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 case 3: - if ((child->thread.dbcr0 & DBCR0_IAC3) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC34MODE) { /* address range - clear slots 3 & 4 */ - child->thread.iac4 = 0; + child->thread.debug.iac4 = 0; dbcr_iac_range(child) &= ~DBCR_IAC34MODE; } - child->thread.iac3 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC3; + child->thread.debug.iac3 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC3; break; case 4: - if ((child->thread.dbcr0 & DBCR0_IAC4) == 0) + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC34MODE) /* Used in a range */ return -EINVAL; - child->thread.iac4 = 0; - child->thread.dbcr0 &= ~DBCR0_IAC4; + child->thread.debug.iac4 = 0; + child->thread.debug.dbcr0 &= ~DBCR0_IAC4; break; #endif default: @@ -1240,18 +1240,18 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) dbcr_dac(child) |= DBCR_DAC1R; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) dbcr_dac(child) |= DBCR_DAC1W; - child->thread.dac1 = (unsigned long)bp_info->addr; + child->thread.debug.dac1 = (unsigned long)bp_info->addr; #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 if (byte_enable) { - child->thread.dvc1 = + child->thread.debug.dvc1 = (unsigned long)bp_info->condition_value; - child->thread.dbcr2 |= + child->thread.debug.dbcr2 |= ((byte_enable << DBCR2_DVC1BE_SHIFT) | (condition_mode << DBCR2_DVC1M_SHIFT)); } #endif #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - } else if (child->thread.dbcr2 & DBCR2_DAC12MODE) { + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { /* Both dac1 and dac2 are part of a range */ return -ENOSPC; #endif @@ -1261,19 +1261,19 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) dbcr_dac(child) |= DBCR_DAC2R; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) dbcr_dac(child) |= DBCR_DAC2W; - child->thread.dac2 = (unsigned long)bp_info->addr; + child->thread.debug.dac2 = (unsigned long)bp_info->addr; #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 if (byte_enable) { - child->thread.dvc2 = + child->thread.debug.dvc2 = (unsigned long)bp_info->condition_value; - child->thread.dbcr2 |= + child->thread.debug.dbcr2 |= ((byte_enable << DBCR2_DVC2BE_SHIFT) | (condition_mode << DBCR2_DVC2M_SHIFT)); } #endif } else return -ENOSPC; - child->thread.dbcr0 |= DBCR0_IDM; + child->thread.debug.dbcr0 |= DBCR0_IDM; child->thread.regs->msr |= MSR_DE; return slot + 4; @@ -1285,32 +1285,32 @@ static int del_dac(struct task_struct *child, int slot) if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) return -ENOENT; - child->thread.dac1 = 0; + child->thread.debug.dac1 = 0; dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W); #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - if (child->thread.dbcr2 & DBCR2_DAC12MODE) { - child->thread.dac2 = 0; - child->thread.dbcr2 &= ~DBCR2_DAC12MODE; + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { + child->thread.debug.dac2 = 0; + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; } - child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); #endif #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - child->thread.dvc1 = 0; + child->thread.debug.dvc1 = 0; #endif } else if (slot == 2) { if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) return -ENOENT; #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - if (child->thread.dbcr2 & DBCR2_DAC12MODE) + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) /* Part of a range */ return -EINVAL; - child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); #endif #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 - child->thread.dvc2 = 0; + child->thread.debug.dvc2 = 0; #endif - child->thread.dac2 = 0; + child->thread.debug.dac2 = 0; dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W); } else return -EINVAL; @@ -1352,22 +1352,22 @@ static int set_dac_range(struct task_struct *child, return -EIO; } - if (child->thread.dbcr0 & + if (child->thread.debug.dbcr0 & (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)) return -ENOSPC; if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) - child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) - child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); - child->thread.dac1 = bp_info->addr; - child->thread.dac2 = bp_info->addr2; + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); + child->thread.debug.dac1 = bp_info->addr; + child->thread.debug.dac2 = bp_info->addr2; if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) - child->thread.dbcr2 |= DBCR2_DAC12M; + child->thread.debug.dbcr2 |= DBCR2_DAC12M; else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) - child->thread.dbcr2 |= DBCR2_DAC12MX; + child->thread.debug.dbcr2 |= DBCR2_DAC12MX; else /* PPC_BREAKPOINT_MODE_MASK */ - child->thread.dbcr2 |= DBCR2_DAC12MM; + child->thread.debug.dbcr2 |= DBCR2_DAC12MM; child->thread.regs->msr |= MSR_DE; return 5; @@ -1507,9 +1507,9 @@ static long ppc_del_hwdebug(struct task_struct *child, long data) rc = del_dac(child, (int)data - 4); if (!rc) { - if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0, - child->thread.dbcr1)) { - child->thread.dbcr0 &= ~DBCR0_IDM; + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0, + child->thread.debug.dbcr1)) { + child->thread.debug.dbcr0 &= ~DBCR0_IDM; child->thread.regs->msr &= ~MSR_DE; } } @@ -1691,7 +1691,7 @@ long arch_ptrace(struct task_struct *child, long request, if (addr > 0) break; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - ret = put_user(child->thread.dac1, datalp); + ret = put_user(child->thread.debug.dac1, datalp); #else dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | (child->thread.hw_brk.type & HW_BRK_TYPE_DABR)); diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index f51599e..18c7c65 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -269,7 +269,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, if (addr > 0) break; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - ret = put_user(child->thread.dac1, (u32 __user *)data); + ret = put_user(child->thread.debug.dac1, (u32 __user *)data); #else dabr_fake = ( (child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 0f83122..f5be6f1 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1300,7 +1300,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, unsigned char tmp; unsigned long new_msr = regs->msr; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - unsigned long new_dbcr0 = current->thread.dbcr0; + unsigned long new_dbcr0 = current->thread.debug.dbcr0; #endif for (i=0; i<ndbg; i++) { @@ -1315,7 +1315,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, } else { new_dbcr0 &= ~DBCR0_IC; if (!DBCR_ACTIVE_EVENTS(new_dbcr0, - current->thread.dbcr1)) { + current->thread.debug.dbcr1)) { new_msr &= ~MSR_DE; new_dbcr0 &= ~DBCR0_IDM; } @@ -1350,7 +1350,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, the user is really doing something wrong. */ regs->msr = new_msr; #ifdef CONFIG_PPC_ADV_DEBUG_REGS - current->thread.dbcr0 = new_dbcr0; + current->thread.debug.dbcr0 = new_dbcr0; #endif if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index bf33c22..1998685 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -352,8 +352,8 @@ static inline int check_io_access(struct pt_regs *regs) #define REASON_TRAP ESR_PTR /* single-step stuff */ -#define single_stepping(regs) (current->thread.dbcr0 & DBCR0_IC) -#define clear_single_step(regs) (current->thread.dbcr0 &= ~DBCR0_IC) +#define single_stepping(regs) (current->thread.debug.dbcr0 & DBCR0_IC) +#define clear_single_step(regs) (current->thread.debug.dbcr0 &= ~DBCR0_IC) #else /* On non-4xx, the reason for the machine check or program @@ -1485,7 +1485,7 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W); #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE - current->thread.dbcr2 &= ~DBCR2_DAC12MODE; + current->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; #endif do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT, 5); @@ -1496,24 +1496,24 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) 6); changed |= 0x01; } else if (debug_status & DBSR_IAC1) { - current->thread.dbcr0 &= ~DBCR0_IAC1; + current->thread.debug.dbcr0 &= ~DBCR0_IAC1; dbcr_iac_range(current) &= ~DBCR_IAC12MODE; do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT, 1); changed |= 0x01; } else if (debug_status & DBSR_IAC2) { - current->thread.dbcr0 &= ~DBCR0_IAC2; + current->thread.debug.dbcr0 &= ~DBCR0_IAC2; do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT, 2); changed |= 0x01; } else if (debug_status & DBSR_IAC3) { - current->thread.dbcr0 &= ~DBCR0_IAC3; + current->thread.debug.dbcr0 &= ~DBCR0_IAC3; dbcr_iac_range(current) &= ~DBCR_IAC34MODE; do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT, 3); changed |= 0x01; } else if (debug_status & DBSR_IAC4) { - current->thread.dbcr0 &= ~DBCR0_IAC4; + current->thread.debug.dbcr0 &= ~DBCR0_IAC4; do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT, 4); changed |= 0x01; @@ -1523,19 +1523,20 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) * Check all other debug flags and see if that bit needs to be turned * back on or not. */ - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, + current->thread.debug.dbcr1)) regs->msr |= MSR_DE; else /* Make sure the IDM flag is off */ - current->thread.dbcr0 &= ~DBCR0_IDM; + current->thread.debug.dbcr0 &= ~DBCR0_IDM; if (changed & 0x01) - mtspr(SPRN_DBCR0, current->thread.dbcr0); + mtspr(SPRN_DBCR0, current->thread.debug.dbcr0); } void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) { - current->thread.dbsr = debug_status; + current->thread.debug.dbsr = debug_status; /* Hack alert: On BookE, Branch Taken stops on the branch itself, while * on server, it stops on the target of the branch. In order to simulate @@ -1552,8 +1553,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) /* Do the single step trick only when coming from userspace */ if (user_mode(regs)) { - current->thread.dbcr0 &= ~DBCR0_BT; - current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; + current->thread.debug.dbcr0 &= ~DBCR0_BT; + current->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; return; } @@ -1581,13 +1582,13 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) return; if (user_mode(regs)) { - current->thread.dbcr0 &= ~DBCR0_IC; - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, - current->thread.dbcr1)) + current->thread.debug.dbcr0 &= ~DBCR0_IC; + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, + current->thread.debug.dbcr1)) regs->msr |= MSR_DE; else /* Make sure the IDM bit is off */ - current->thread.dbcr0 &= ~DBCR0_IDM; + current->thread.debug.dbcr0 &= ~DBCR0_IDM; } _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 2/2] powerpc: move debug registers in a structure 2013-07-04 6:15 ` Bharat Bhushan @ 2013-07-10 7:25 ` Michael Neuling -1 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-10 7:25 UTC (permalink / raw) To: Bharat Bhushan Cc: linuxppc-dev, benh, linux-kernel, scottwood, agraf, Bharat Bhushan Bharat Bhushan <r65777@freescale.com> wrote: > This way we can use same data type struct with KVM and > also help in using other debug related function. > > Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> > --- > arch/powerpc/include/asm/processor.h | 38 +++++---- > arch/powerpc/include/asm/reg_booke.h | 8 +- > arch/powerpc/kernel/asm-offsets.c | 2 +- > arch/powerpc/kernel/process.c | 42 +++++----- > arch/powerpc/kernel/ptrace.c | 154 +++++++++++++++++----------------- > arch/powerpc/kernel/ptrace32.c | 2 +- > arch/powerpc/kernel/signal_32.c | 6 +- > arch/powerpc/kernel/traps.c | 35 ++++---- > 8 files changed, 147 insertions(+), 140 deletions(-) > > diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h > index 47a35b0..9e9aa26 100644 > --- a/arch/powerpc/include/asm/processor.h > +++ b/arch/powerpc/include/asm/processor.h > @@ -147,22 +147,7 @@ typedef struct { > #define TS_FPR(i) fpr[i][TS_FPROFFSET] > #define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET] > > -struct thread_struct { > - unsigned long ksp; /* Kernel stack pointer */ > - unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ > - > -#ifdef CONFIG_PPC64 > - unsigned long ksp_vsid; > -#endif > - struct pt_regs *regs; /* Pointer to saved register state */ > - mm_segment_t fs; /* for get_fs() validation */ > -#ifdef CONFIG_BOOKE > - /* BookE base exception scratch space; align on cacheline */ > - unsigned long normsave[8] ____cacheline_aligned; > -#endif > -#ifdef CONFIG_PPC32 > - void *pgdir; /* root of page-table tree */ > -#endif > +struct debug_reg { > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > /* > * The following help to manage the use of Debug Control Registers > @@ -199,6 +184,27 @@ struct thread_struct { > unsigned long dvc2; > #endif > #endif > +}; > + > +struct thread_struct { > + unsigned long ksp; /* Kernel stack pointer */ > + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ > + > +#ifdef CONFIG_PPC64 > + unsigned long ksp_vsid; > +#endif > + struct pt_regs *regs; /* Pointer to saved register state */ > + mm_segment_t fs; /* for get_fs() validation */ > +#ifdef CONFIG_BOOKE > + /* BookE base exception scratch space; align on cacheline */ > + unsigned long normsave[8] ____cacheline_aligned; > +#endif > +#ifdef CONFIG_PPC32 > + void *pgdir; /* root of page-table tree */ > +#endif > + /* Debug Registers */ > + struct debug_reg debug; > + > /* FP and VSX 0-31 register set */ > double fpr[32][TS_FPRWIDTH] __attribute__((aligned(16))); > struct { > diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h > index b417de3..455dc89 100644 > --- a/arch/powerpc/include/asm/reg_booke.h > +++ b/arch/powerpc/include/asm/reg_booke.h > @@ -381,7 +381,7 @@ > #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ > #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ > > -#define dbcr_iac_range(task) ((task)->thread.dbcr0) > +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) > #define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ > #define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ > #define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ > @@ -395,7 +395,7 @@ > #define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ > #define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ > > -#define dbcr_dac(task) ((task)->thread.dbcr1) > +#define dbcr_dac(task) ((task)->thread.debug.dbcr1) > #define DBCR_DAC1R DBCR1_DAC1R > #define DBCR_DAC1W DBCR1_DAC1W > #define DBCR_DAC2R DBCR1_DAC2R > @@ -441,7 +441,7 @@ > #define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ > #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ > > -#define dbcr_dac(task) ((task)->thread.dbcr0) > +#define dbcr_dac(task) ((task)->thread.debug.dbcr0) > #define DBCR_DAC1R DBCR0_DAC1R > #define DBCR_DAC1W DBCR0_DAC1W > #define DBCR_DAC2R DBCR0_DAC2R > @@ -475,7 +475,7 @@ > #define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ > #define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ > > -#define dbcr_iac_range(task) ((task)->thread.dbcr1) > +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr1) > #define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */ > #define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */ > #define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */ > diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c > index c7e8afc..d56727c 100644 > --- a/arch/powerpc/kernel/asm-offsets.c > +++ b/arch/powerpc/kernel/asm-offsets.c > @@ -113,7 +113,7 @@ int main(void) > #endif /* CONFIG_SPE */ > #endif /* CONFIG_PPC64 */ > #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) > - DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); > + DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, debug.dbcr0)); > #endif > #ifdef CONFIG_KVM_BOOK3S_32_HANDLER > DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu)); > diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c > index 19b8733..f8ae5e3 100644 > --- a/arch/powerpc/kernel/process.c > +++ b/arch/powerpc/kernel/process.c > @@ -312,28 +312,28 @@ static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); > */ > static void set_debug_reg_defaults(struct thread_struct *thread) > { > - thread->iac1 = thread->iac2 = 0; > + thread->debug.iac1 = thread->debug.iac2 = 0; > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > - thread->iac3 = thread->iac4 = 0; > + thread->debug.iac3 = thread->debug.iac4 = 0; > #endif > - thread->dac1 = thread->dac2 = 0; > + thread->debug.dac1 = thread->debug.dac2 = 0; > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - thread->dvc1 = thread->dvc2 = 0; > + thread->debug.dvc1 = thread->debug.dvc2 = 0; > #endif > - thread->dbcr0 = 0; > + thread->debug.dbcr0 = 0; > #ifdef CONFIG_BOOKE > /* > * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) > */ > - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | > + thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | > DBCR1_IAC3US | DBCR1_IAC4US; > /* > * Force Data Address Compare User/Supervisor bits to be User-only > * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. > */ > - thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; > + thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; > #else > - thread->dbcr1 = 0; > + thread->debug.dbcr1 = 0; > #endif > } > > @@ -346,22 +346,22 @@ static void prime_debug_regs(struct thread_struct *thread) > */ > mtmsr(mfmsr() & ~MSR_DE); > > - mtspr(SPRN_IAC1, thread->iac1); > - mtspr(SPRN_IAC2, thread->iac2); > + mtspr(SPRN_IAC1, thread->debug.iac1); > + mtspr(SPRN_IAC2, thread->debug.iac2); > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > - mtspr(SPRN_IAC3, thread->iac3); > - mtspr(SPRN_IAC4, thread->iac4); > + mtspr(SPRN_IAC3, thread->debug.iac3); > + mtspr(SPRN_IAC4, thread->debug.iac4); > #endif > - mtspr(SPRN_DAC1, thread->dac1); > - mtspr(SPRN_DAC2, thread->dac2); > + mtspr(SPRN_DAC1, thread->debug.dac1); > + mtspr(SPRN_DAC2, thread->debug.dac2); > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - mtspr(SPRN_DVC1, thread->dvc1); > - mtspr(SPRN_DVC2, thread->dvc2); > + mtspr(SPRN_DVC1, thread->debug.dvc1); > + mtspr(SPRN_DVC2, thread->debug.dvc2); > #endif > - mtspr(SPRN_DBCR0, thread->dbcr0); > - mtspr(SPRN_DBCR1, thread->dbcr1); > + mtspr(SPRN_DBCR0, thread->debug.dbcr0); > + mtspr(SPRN_DBCR1, thread->debug.dbcr1); > #ifdef CONFIG_BOOKE > - mtspr(SPRN_DBCR2, thread->dbcr2); > + mtspr(SPRN_DBCR2, thread->debug.dbcr2); > #endif > } > /* > @@ -371,8 +371,8 @@ static void prime_debug_regs(struct thread_struct *thread) > */ > static void switch_booke_debug_regs(struct thread_struct *new_thread) > { > - if ((current->thread.dbcr0 & DBCR0_IDM) > - || (new_thread->dbcr0 & DBCR0_IDM)) > + if ((current->thread.debug.dbcr0 & DBCR0_IDM) > + || (new_thread->debug.dbcr0 & DBCR0_IDM)) > prime_debug_regs(new_thread); > } > #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ > diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c > index 64f7bd5..9bb0b8a 100644 > --- a/arch/powerpc/kernel/ptrace.c > +++ b/arch/powerpc/kernel/ptrace.c > @@ -854,8 +854,8 @@ void user_enable_single_step(struct task_struct *task) > > if (regs != NULL) { > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - task->thread.dbcr0 &= ~DBCR0_BT; > - task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; > + task->thread.debug.dbcr0 &= ~DBCR0_BT; > + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; > regs->msr |= MSR_DE; > #else > regs->msr &= ~MSR_BE; > @@ -871,8 +871,8 @@ void user_enable_block_step(struct task_struct *task) > > if (regs != NULL) { > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - task->thread.dbcr0 &= ~DBCR0_IC; > - task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; > + task->thread.debug.dbcr0 &= ~DBCR0_IC; > + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT; > regs->msr |= MSR_DE; > #else > regs->msr &= ~MSR_SE; > @@ -894,16 +894,16 @@ void user_disable_single_step(struct task_struct *task) > * And, after doing so, if all debug flags are off, turn > * off DBCR0(IDM) and MSR(DE) .... Torez > */ > - task->thread.dbcr0 &= ~DBCR0_IC; > + task->thread.debug.dbcr0 &= ~DBCR0_IC; > /* > * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set. > */ > - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, > - task->thread.dbcr1)) { > + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, > + task->thread.debug.dbcr1)) { > /* > * All debug events were off..... > */ > - task->thread.dbcr0 &= ~DBCR0_IDM; > + task->thread.debug.dbcr0 &= ~DBCR0_IDM; > regs->msr &= ~MSR_DE; > } > #else > @@ -1031,14 +1031,14 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, > */ > > /* DAC's hold the whole address without any mode flags */ > - task->thread.dac1 = data & ~0x3UL; > + task->thread.debug.dac1 = data & ~0x3UL; > > - if (task->thread.dac1 == 0) { > + if (task->thread.debug.dac1 == 0) { > dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); > - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, > - task->thread.dbcr1)) { > + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, > + task->thread.debug.dbcr1)) { > task->thread.regs->msr &= ~MSR_DE; > - task->thread.dbcr0 &= ~DBCR0_IDM; > + task->thread.debug.dbcr0 &= ~DBCR0_IDM; > } > return 0; > } > @@ -1050,7 +1050,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, > > /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 > register */ > - task->thread.dbcr0 |= DBCR0_IDM; > + task->thread.debug.dbcr0 |= DBCR0_IDM; > > /* Check for write and read flags and set DBCR0 > accordingly */ > @@ -1080,10 +1080,10 @@ static long set_instruction_bp(struct task_struct *child, > struct ppc_hw_breakpoint *bp_info) > { > int slot; > - int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0); > - int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0); > - int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0); > - int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0); > + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0); > + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0); > + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0); > + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0); > > if (dbcr_iac_range(child) & DBCR_IAC12MODE) > slot2_in_use = 1; > @@ -1102,9 +1102,9 @@ static long set_instruction_bp(struct task_struct *child, > /* We need a pair of IAC regsisters */ > if ((!slot1_in_use) && (!slot2_in_use)) { > slot = 1; > - child->thread.iac1 = bp_info->addr; > - child->thread.iac2 = bp_info->addr2; > - child->thread.dbcr0 |= DBCR0_IAC1; > + child->thread.debug.iac1 = bp_info->addr; > + child->thread.debug.iac2 = bp_info->addr2; > + child->thread.debug.dbcr0 |= DBCR0_IAC1; > if (bp_info->addr_mode == > PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) > dbcr_iac_range(child) |= DBCR_IAC12X; > @@ -1113,9 +1113,9 @@ static long set_instruction_bp(struct task_struct *child, > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > } else if ((!slot3_in_use) && (!slot4_in_use)) { > slot = 3; > - child->thread.iac3 = bp_info->addr; > - child->thread.iac4 = bp_info->addr2; > - child->thread.dbcr0 |= DBCR0_IAC3; > + child->thread.debug.iac3 = bp_info->addr; > + child->thread.debug.iac4 = bp_info->addr2; > + child->thread.debug.dbcr0 |= DBCR0_IAC3; > if (bp_info->addr_mode == > PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) > dbcr_iac_range(child) |= DBCR_IAC34X; > @@ -1135,30 +1135,30 @@ static long set_instruction_bp(struct task_struct *child, > */ > if (slot2_in_use || (slot3_in_use == slot4_in_use)) { > slot = 1; > - child->thread.iac1 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC1; > + child->thread.debug.iac1 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC1; > goto out; > } > } > if (!slot2_in_use) { > slot = 2; > - child->thread.iac2 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC2; > + child->thread.debug.iac2 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC2; > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > } else if (!slot3_in_use) { > slot = 3; > - child->thread.iac3 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC3; > + child->thread.debug.iac3 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC3; > } else if (!slot4_in_use) { > slot = 4; > - child->thread.iac4 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC4; > + child->thread.debug.iac4 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC4; > #endif > } else > return -ENOSPC; > } > out: > - child->thread.dbcr0 |= DBCR0_IDM; > + child->thread.debug.dbcr0 |= DBCR0_IDM; > child->thread.regs->msr |= MSR_DE; > > return slot; > @@ -1168,49 +1168,49 @@ static int del_instruction_bp(struct task_struct *child, int slot) > { > switch (slot) { > case 1: > - if ((child->thread.dbcr0 & DBCR0_IAC1) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC12MODE) { > /* address range - clear slots 1 & 2 */ > - child->thread.iac2 = 0; > + child->thread.debug.iac2 = 0; > dbcr_iac_range(child) &= ~DBCR_IAC12MODE; > } > - child->thread.iac1 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC1; > + child->thread.debug.iac1 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC1; > break; > case 2: > - if ((child->thread.dbcr0 & DBCR0_IAC2) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC12MODE) > /* used in a range */ > return -EINVAL; > - child->thread.iac2 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC2; > + child->thread.debug.iac2 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC2; > break; > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > case 3: > - if ((child->thread.dbcr0 & DBCR0_IAC3) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC34MODE) { > /* address range - clear slots 3 & 4 */ > - child->thread.iac4 = 0; > + child->thread.debug.iac4 = 0; > dbcr_iac_range(child) &= ~DBCR_IAC34MODE; > } > - child->thread.iac3 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC3; > + child->thread.debug.iac3 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC3; > break; > case 4: > - if ((child->thread.dbcr0 & DBCR0_IAC4) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC34MODE) > /* Used in a range */ > return -EINVAL; > - child->thread.iac4 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC4; > + child->thread.debug.iac4 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC4; > break; > #endif > default: > @@ -1240,18 +1240,18 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) > dbcr_dac(child) |= DBCR_DAC1R; > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) > dbcr_dac(child) |= DBCR_DAC1W; > - child->thread.dac1 = (unsigned long)bp_info->addr; > + child->thread.debug.dac1 = (unsigned long)bp_info->addr; > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > if (byte_enable) { > - child->thread.dvc1 = > + child->thread.debug.dvc1 = > (unsigned long)bp_info->condition_value; > - child->thread.dbcr2 |= > + child->thread.debug.dbcr2 |= > ((byte_enable << DBCR2_DVC1BE_SHIFT) | > (condition_mode << DBCR2_DVC1M_SHIFT)); > } > #endif > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - } else if (child->thread.dbcr2 & DBCR2_DAC12MODE) { > + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { > /* Both dac1 and dac2 are part of a range */ > return -ENOSPC; > #endif > @@ -1261,19 +1261,19 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) > dbcr_dac(child) |= DBCR_DAC2R; > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) > dbcr_dac(child) |= DBCR_DAC2W; > - child->thread.dac2 = (unsigned long)bp_info->addr; > + child->thread.debug.dac2 = (unsigned long)bp_info->addr; > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > if (byte_enable) { > - child->thread.dvc2 = > + child->thread.debug.dvc2 = > (unsigned long)bp_info->condition_value; > - child->thread.dbcr2 |= > + child->thread.debug.dbcr2 |= > ((byte_enable << DBCR2_DVC2BE_SHIFT) | > (condition_mode << DBCR2_DVC2M_SHIFT)); > } > #endif > } else > return -ENOSPC; > - child->thread.dbcr0 |= DBCR0_IDM; > + child->thread.debug.dbcr0 |= DBCR0_IDM; > child->thread.regs->msr |= MSR_DE; > > return slot + 4; > @@ -1285,32 +1285,32 @@ static int del_dac(struct task_struct *child, int slot) > if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) > return -ENOENT; > > - child->thread.dac1 = 0; > + child->thread.debug.dac1 = 0; > dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W); > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - if (child->thread.dbcr2 & DBCR2_DAC12MODE) { > - child->thread.dac2 = 0; > - child->thread.dbcr2 &= ~DBCR2_DAC12MODE; > + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { > + child->thread.debug.dac2 = 0; > + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; > } > - child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); > + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); > #endif > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - child->thread.dvc1 = 0; > + child->thread.debug.dvc1 = 0; > #endif > } else if (slot == 2) { > if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) > return -ENOENT; > > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - if (child->thread.dbcr2 & DBCR2_DAC12MODE) > + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) > /* Part of a range */ > return -EINVAL; > - child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); > + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); > #endif > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - child->thread.dvc2 = 0; > + child->thread.debug.dvc2 = 0; > #endif > - child->thread.dac2 = 0; > + child->thread.debug.dac2 = 0; > dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W); > } else > return -EINVAL; > @@ -1352,22 +1352,22 @@ static int set_dac_range(struct task_struct *child, > return -EIO; > } > > - if (child->thread.dbcr0 & > + if (child->thread.debug.dbcr0 & > (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)) > return -ENOSPC; > > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) > - child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); > + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) > - child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); > - child->thread.dac1 = bp_info->addr; > - child->thread.dac2 = bp_info->addr2; > + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); > + child->thread.debug.dac1 = bp_info->addr; > + child->thread.debug.dac2 = bp_info->addr2; > if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) > - child->thread.dbcr2 |= DBCR2_DAC12M; > + child->thread.debug.dbcr2 |= DBCR2_DAC12M; > else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) > - child->thread.dbcr2 |= DBCR2_DAC12MX; > + child->thread.debug.dbcr2 |= DBCR2_DAC12MX; > else /* PPC_BREAKPOINT_MODE_MASK */ > - child->thread.dbcr2 |= DBCR2_DAC12MM; > + child->thread.debug.dbcr2 |= DBCR2_DAC12MM; > child->thread.regs->msr |= MSR_DE; > > return 5; > @@ -1507,9 +1507,9 @@ static long ppc_del_hwdebug(struct task_struct *child, long data) > rc = del_dac(child, (int)data - 4); > > if (!rc) { > - if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0, > - child->thread.dbcr1)) { > - child->thread.dbcr0 &= ~DBCR0_IDM; > + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0, > + child->thread.debug.dbcr1)) { > + child->thread.debug.dbcr0 &= ~DBCR0_IDM; > child->thread.regs->msr &= ~MSR_DE; > } > } > @@ -1691,7 +1691,7 @@ long arch_ptrace(struct task_struct *child, long request, > if (addr > 0) > break; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - ret = put_user(child->thread.dac1, datalp); > + ret = put_user(child->thread.debug.dac1, datalp); > #else > dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | > (child->thread.hw_brk.type & HW_BRK_TYPE_DABR)); > diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c > index f51599e..18c7c65 100644 > --- a/arch/powerpc/kernel/ptrace32.c > +++ b/arch/powerpc/kernel/ptrace32.c > @@ -269,7 +269,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, > if (addr > 0) > break; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - ret = put_user(child->thread.dac1, (u32 __user *)data); > + ret = put_user(child->thread.debug.dac1, (u32 __user *)data); > #else > dabr_fake = ( > (child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | > diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c > index 0f83122..f5be6f1 100644 > --- a/arch/powerpc/kernel/signal_32.c > +++ b/arch/powerpc/kernel/signal_32.c > @@ -1300,7 +1300,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, > unsigned char tmp; > unsigned long new_msr = regs->msr; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - unsigned long new_dbcr0 = current->thread.dbcr0; > + unsigned long new_dbcr0 = current->thread.debug.dbcr0; > #endif > > for (i=0; i<ndbg; i++) { > @@ -1315,7 +1315,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, > } else { > new_dbcr0 &= ~DBCR0_IC; > if (!DBCR_ACTIVE_EVENTS(new_dbcr0, > - current->thread.dbcr1)) { > + current->thread.debug.dbcr1)) { > new_msr &= ~MSR_DE; > new_dbcr0 &= ~DBCR0_IDM; > } > @@ -1350,7 +1350,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, > the user is really doing something wrong. */ > regs->msr = new_msr; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - current->thread.dbcr0 = new_dbcr0; > + current->thread.debug.dbcr0 = new_dbcr0; > #endif > > if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)) > diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c > index bf33c22..1998685 100644 > --- a/arch/powerpc/kernel/traps.c > +++ b/arch/powerpc/kernel/traps.c > @@ -352,8 +352,8 @@ static inline int check_io_access(struct pt_regs *regs) > #define REASON_TRAP ESR_PTR > > /* single-step stuff */ > -#define single_stepping(regs) (current->thread.dbcr0 & DBCR0_IC) > -#define clear_single_step(regs) (current->thread.dbcr0 &= ~DBCR0_IC) > +#define single_stepping(regs) (current->thread.debug.dbcr0 & DBCR0_IC) > +#define clear_single_step(regs) (current->thread.debug.dbcr0 &= ~DBCR0_IC) > > #else > /* On non-4xx, the reason for the machine check or program > @@ -1485,7 +1485,7 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) > if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { > dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W); > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - current->thread.dbcr2 &= ~DBCR2_DAC12MODE; > + current->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; > #endif > do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT, > 5); > @@ -1496,24 +1496,24 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) > 6); > changed |= 0x01; > } else if (debug_status & DBSR_IAC1) { > - current->thread.dbcr0 &= ~DBCR0_IAC1; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC1; > dbcr_iac_range(current) &= ~DBCR_IAC12MODE; > do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT, > 1); > changed |= 0x01; > } else if (debug_status & DBSR_IAC2) { > - current->thread.dbcr0 &= ~DBCR0_IAC2; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC2; > do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT, > 2); > changed |= 0x01; > } else if (debug_status & DBSR_IAC3) { > - current->thread.dbcr0 &= ~DBCR0_IAC3; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC3; > dbcr_iac_range(current) &= ~DBCR_IAC34MODE; > do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT, > 3); > changed |= 0x01; > } else if (debug_status & DBSR_IAC4) { > - current->thread.dbcr0 &= ~DBCR0_IAC4; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC4; > do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT, > 4); > changed |= 0x01; > @@ -1523,19 +1523,20 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) > * Check all other debug flags and see if that bit needs to be turned > * back on or not. > */ > - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) > + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, > + current->thread.debug.dbcr1)) > regs->msr |= MSR_DE; > else > /* Make sure the IDM flag is off */ > - current->thread.dbcr0 &= ~DBCR0_IDM; > + current->thread.debug.dbcr0 &= ~DBCR0_IDM; > > if (changed & 0x01) > - mtspr(SPRN_DBCR0, current->thread.dbcr0); > + mtspr(SPRN_DBCR0, current->thread.debug.dbcr0); > } > > void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) > { > - current->thread.dbsr = debug_status; > + current->thread.debug.dbsr = debug_status; > > /* Hack alert: On BookE, Branch Taken stops on the branch itself, while > * on server, it stops on the target of the branch. In order to simulate > @@ -1552,8 +1553,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) > > /* Do the single step trick only when coming from userspace */ > if (user_mode(regs)) { > - current->thread.dbcr0 &= ~DBCR0_BT; > - current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; > + current->thread.debug.dbcr0 &= ~DBCR0_BT; > + current->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; > regs->msr |= MSR_DE; > return; > } > @@ -1581,13 +1582,13 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) > return; > > if (user_mode(regs)) { > - current->thread.dbcr0 &= ~DBCR0_IC; > - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, > - current->thread.dbcr1)) > + current->thread.debug.dbcr0 &= ~DBCR0_IC; > + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, > + current->thread.debug.dbcr1)) > regs->msr |= MSR_DE; > else > /* Make sure the IDM bit is off */ > - current->thread.dbcr0 &= ~DBCR0_IDM; > + current->thread.debug.dbcr0 &= ~DBCR0_IDM; > } > > _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); > -- > 1.7.0.4 > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/2] powerpc: move debug registers in a structure @ 2013-07-10 7:25 ` Michael Neuling 0 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-10 7:25 UTC (permalink / raw) To: Bharat Bhushan Cc: linux-kernel, agraf, Bharat Bhushan, scottwood, linuxppc-dev Bharat Bhushan <r65777@freescale.com> wrote: > This way we can use same data type struct with KVM and > also help in using other debug related function. > > Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> > --- > arch/powerpc/include/asm/processor.h | 38 +++++---- > arch/powerpc/include/asm/reg_booke.h | 8 +- > arch/powerpc/kernel/asm-offsets.c | 2 +- > arch/powerpc/kernel/process.c | 42 +++++----- > arch/powerpc/kernel/ptrace.c | 154 +++++++++++++++++----------------- > arch/powerpc/kernel/ptrace32.c | 2 +- > arch/powerpc/kernel/signal_32.c | 6 +- > arch/powerpc/kernel/traps.c | 35 ++++---- > 8 files changed, 147 insertions(+), 140 deletions(-) > > diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h > index 47a35b0..9e9aa26 100644 > --- a/arch/powerpc/include/asm/processor.h > +++ b/arch/powerpc/include/asm/processor.h > @@ -147,22 +147,7 @@ typedef struct { > #define TS_FPR(i) fpr[i][TS_FPROFFSET] > #define TS_TRANS_FPR(i) transact_fpr[i][TS_FPROFFSET] > > -struct thread_struct { > - unsigned long ksp; /* Kernel stack pointer */ > - unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ > - > -#ifdef CONFIG_PPC64 > - unsigned long ksp_vsid; > -#endif > - struct pt_regs *regs; /* Pointer to saved register state */ > - mm_segment_t fs; /* for get_fs() validation */ > -#ifdef CONFIG_BOOKE > - /* BookE base exception scratch space; align on cacheline */ > - unsigned long normsave[8] ____cacheline_aligned; > -#endif > -#ifdef CONFIG_PPC32 > - void *pgdir; /* root of page-table tree */ > -#endif > +struct debug_reg { > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > /* > * The following help to manage the use of Debug Control Registers > @@ -199,6 +184,27 @@ struct thread_struct { > unsigned long dvc2; > #endif > #endif > +}; > + > +struct thread_struct { > + unsigned long ksp; /* Kernel stack pointer */ > + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ > + > +#ifdef CONFIG_PPC64 > + unsigned long ksp_vsid; > +#endif > + struct pt_regs *regs; /* Pointer to saved register state */ > + mm_segment_t fs; /* for get_fs() validation */ > +#ifdef CONFIG_BOOKE > + /* BookE base exception scratch space; align on cacheline */ > + unsigned long normsave[8] ____cacheline_aligned; > +#endif > +#ifdef CONFIG_PPC32 > + void *pgdir; /* root of page-table tree */ > +#endif > + /* Debug Registers */ > + struct debug_reg debug; > + > /* FP and VSX 0-31 register set */ > double fpr[32][TS_FPRWIDTH] __attribute__((aligned(16))); > struct { > diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h > index b417de3..455dc89 100644 > --- a/arch/powerpc/include/asm/reg_booke.h > +++ b/arch/powerpc/include/asm/reg_booke.h > @@ -381,7 +381,7 @@ > #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ > #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ > > -#define dbcr_iac_range(task) ((task)->thread.dbcr0) > +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) > #define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ > #define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ > #define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ > @@ -395,7 +395,7 @@ > #define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ > #define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ > > -#define dbcr_dac(task) ((task)->thread.dbcr1) > +#define dbcr_dac(task) ((task)->thread.debug.dbcr1) > #define DBCR_DAC1R DBCR1_DAC1R > #define DBCR_DAC1W DBCR1_DAC1W > #define DBCR_DAC2R DBCR1_DAC2R > @@ -441,7 +441,7 @@ > #define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ > #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ > > -#define dbcr_dac(task) ((task)->thread.dbcr0) > +#define dbcr_dac(task) ((task)->thread.debug.dbcr0) > #define DBCR_DAC1R DBCR0_DAC1R > #define DBCR_DAC1W DBCR0_DAC1W > #define DBCR_DAC2R DBCR0_DAC2R > @@ -475,7 +475,7 @@ > #define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ > #define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ > > -#define dbcr_iac_range(task) ((task)->thread.dbcr1) > +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr1) > #define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */ > #define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */ > #define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */ > diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c > index c7e8afc..d56727c 100644 > --- a/arch/powerpc/kernel/asm-offsets.c > +++ b/arch/powerpc/kernel/asm-offsets.c > @@ -113,7 +113,7 @@ int main(void) > #endif /* CONFIG_SPE */ > #endif /* CONFIG_PPC64 */ > #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) > - DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); > + DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, debug.dbcr0)); > #endif > #ifdef CONFIG_KVM_BOOK3S_32_HANDLER > DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu)); > diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c > index 19b8733..f8ae5e3 100644 > --- a/arch/powerpc/kernel/process.c > +++ b/arch/powerpc/kernel/process.c > @@ -312,28 +312,28 @@ static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); > */ > static void set_debug_reg_defaults(struct thread_struct *thread) > { > - thread->iac1 = thread->iac2 = 0; > + thread->debug.iac1 = thread->debug.iac2 = 0; > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > - thread->iac3 = thread->iac4 = 0; > + thread->debug.iac3 = thread->debug.iac4 = 0; > #endif > - thread->dac1 = thread->dac2 = 0; > + thread->debug.dac1 = thread->debug.dac2 = 0; > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - thread->dvc1 = thread->dvc2 = 0; > + thread->debug.dvc1 = thread->debug.dvc2 = 0; > #endif > - thread->dbcr0 = 0; > + thread->debug.dbcr0 = 0; > #ifdef CONFIG_BOOKE > /* > * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) > */ > - thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | > + thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | > DBCR1_IAC3US | DBCR1_IAC4US; > /* > * Force Data Address Compare User/Supervisor bits to be User-only > * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. > */ > - thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; > + thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; > #else > - thread->dbcr1 = 0; > + thread->debug.dbcr1 = 0; > #endif > } > > @@ -346,22 +346,22 @@ static void prime_debug_regs(struct thread_struct *thread) > */ > mtmsr(mfmsr() & ~MSR_DE); > > - mtspr(SPRN_IAC1, thread->iac1); > - mtspr(SPRN_IAC2, thread->iac2); > + mtspr(SPRN_IAC1, thread->debug.iac1); > + mtspr(SPRN_IAC2, thread->debug.iac2); > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > - mtspr(SPRN_IAC3, thread->iac3); > - mtspr(SPRN_IAC4, thread->iac4); > + mtspr(SPRN_IAC3, thread->debug.iac3); > + mtspr(SPRN_IAC4, thread->debug.iac4); > #endif > - mtspr(SPRN_DAC1, thread->dac1); > - mtspr(SPRN_DAC2, thread->dac2); > + mtspr(SPRN_DAC1, thread->debug.dac1); > + mtspr(SPRN_DAC2, thread->debug.dac2); > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - mtspr(SPRN_DVC1, thread->dvc1); > - mtspr(SPRN_DVC2, thread->dvc2); > + mtspr(SPRN_DVC1, thread->debug.dvc1); > + mtspr(SPRN_DVC2, thread->debug.dvc2); > #endif > - mtspr(SPRN_DBCR0, thread->dbcr0); > - mtspr(SPRN_DBCR1, thread->dbcr1); > + mtspr(SPRN_DBCR0, thread->debug.dbcr0); > + mtspr(SPRN_DBCR1, thread->debug.dbcr1); > #ifdef CONFIG_BOOKE > - mtspr(SPRN_DBCR2, thread->dbcr2); > + mtspr(SPRN_DBCR2, thread->debug.dbcr2); > #endif > } > /* > @@ -371,8 +371,8 @@ static void prime_debug_regs(struct thread_struct *thread) > */ > static void switch_booke_debug_regs(struct thread_struct *new_thread) > { > - if ((current->thread.dbcr0 & DBCR0_IDM) > - || (new_thread->dbcr0 & DBCR0_IDM)) > + if ((current->thread.debug.dbcr0 & DBCR0_IDM) > + || (new_thread->debug.dbcr0 & DBCR0_IDM)) > prime_debug_regs(new_thread); > } > #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ > diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c > index 64f7bd5..9bb0b8a 100644 > --- a/arch/powerpc/kernel/ptrace.c > +++ b/arch/powerpc/kernel/ptrace.c > @@ -854,8 +854,8 @@ void user_enable_single_step(struct task_struct *task) > > if (regs != NULL) { > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - task->thread.dbcr0 &= ~DBCR0_BT; > - task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; > + task->thread.debug.dbcr0 &= ~DBCR0_BT; > + task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; > regs->msr |= MSR_DE; > #else > regs->msr &= ~MSR_BE; > @@ -871,8 +871,8 @@ void user_enable_block_step(struct task_struct *task) > > if (regs != NULL) { > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - task->thread.dbcr0 &= ~DBCR0_IC; > - task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; > + task->thread.debug.dbcr0 &= ~DBCR0_IC; > + task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT; > regs->msr |= MSR_DE; > #else > regs->msr &= ~MSR_SE; > @@ -894,16 +894,16 @@ void user_disable_single_step(struct task_struct *task) > * And, after doing so, if all debug flags are off, turn > * off DBCR0(IDM) and MSR(DE) .... Torez > */ > - task->thread.dbcr0 &= ~DBCR0_IC; > + task->thread.debug.dbcr0 &= ~DBCR0_IC; > /* > * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set. > */ > - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, > - task->thread.dbcr1)) { > + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, > + task->thread.debug.dbcr1)) { > /* > * All debug events were off..... > */ > - task->thread.dbcr0 &= ~DBCR0_IDM; > + task->thread.debug.dbcr0 &= ~DBCR0_IDM; > regs->msr &= ~MSR_DE; > } > #else > @@ -1031,14 +1031,14 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, > */ > > /* DAC's hold the whole address without any mode flags */ > - task->thread.dac1 = data & ~0x3UL; > + task->thread.debug.dac1 = data & ~0x3UL; > > - if (task->thread.dac1 == 0) { > + if (task->thread.debug.dac1 == 0) { > dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); > - if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, > - task->thread.dbcr1)) { > + if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0, > + task->thread.debug.dbcr1)) { > task->thread.regs->msr &= ~MSR_DE; > - task->thread.dbcr0 &= ~DBCR0_IDM; > + task->thread.debug.dbcr0 &= ~DBCR0_IDM; > } > return 0; > } > @@ -1050,7 +1050,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, > > /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 > register */ > - task->thread.dbcr0 |= DBCR0_IDM; > + task->thread.debug.dbcr0 |= DBCR0_IDM; > > /* Check for write and read flags and set DBCR0 > accordingly */ > @@ -1080,10 +1080,10 @@ static long set_instruction_bp(struct task_struct *child, > struct ppc_hw_breakpoint *bp_info) > { > int slot; > - int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0); > - int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0); > - int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0); > - int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0); > + int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0); > + int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0); > + int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0); > + int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0); > > if (dbcr_iac_range(child) & DBCR_IAC12MODE) > slot2_in_use = 1; > @@ -1102,9 +1102,9 @@ static long set_instruction_bp(struct task_struct *child, > /* We need a pair of IAC regsisters */ > if ((!slot1_in_use) && (!slot2_in_use)) { > slot = 1; > - child->thread.iac1 = bp_info->addr; > - child->thread.iac2 = bp_info->addr2; > - child->thread.dbcr0 |= DBCR0_IAC1; > + child->thread.debug.iac1 = bp_info->addr; > + child->thread.debug.iac2 = bp_info->addr2; > + child->thread.debug.dbcr0 |= DBCR0_IAC1; > if (bp_info->addr_mode == > PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) > dbcr_iac_range(child) |= DBCR_IAC12X; > @@ -1113,9 +1113,9 @@ static long set_instruction_bp(struct task_struct *child, > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > } else if ((!slot3_in_use) && (!slot4_in_use)) { > slot = 3; > - child->thread.iac3 = bp_info->addr; > - child->thread.iac4 = bp_info->addr2; > - child->thread.dbcr0 |= DBCR0_IAC3; > + child->thread.debug.iac3 = bp_info->addr; > + child->thread.debug.iac4 = bp_info->addr2; > + child->thread.debug.dbcr0 |= DBCR0_IAC3; > if (bp_info->addr_mode == > PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) > dbcr_iac_range(child) |= DBCR_IAC34X; > @@ -1135,30 +1135,30 @@ static long set_instruction_bp(struct task_struct *child, > */ > if (slot2_in_use || (slot3_in_use == slot4_in_use)) { > slot = 1; > - child->thread.iac1 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC1; > + child->thread.debug.iac1 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC1; > goto out; > } > } > if (!slot2_in_use) { > slot = 2; > - child->thread.iac2 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC2; > + child->thread.debug.iac2 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC2; > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > } else if (!slot3_in_use) { > slot = 3; > - child->thread.iac3 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC3; > + child->thread.debug.iac3 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC3; > } else if (!slot4_in_use) { > slot = 4; > - child->thread.iac4 = bp_info->addr; > - child->thread.dbcr0 |= DBCR0_IAC4; > + child->thread.debug.iac4 = bp_info->addr; > + child->thread.debug.dbcr0 |= DBCR0_IAC4; > #endif > } else > return -ENOSPC; > } > out: > - child->thread.dbcr0 |= DBCR0_IDM; > + child->thread.debug.dbcr0 |= DBCR0_IDM; > child->thread.regs->msr |= MSR_DE; > > return slot; > @@ -1168,49 +1168,49 @@ static int del_instruction_bp(struct task_struct *child, int slot) > { > switch (slot) { > case 1: > - if ((child->thread.dbcr0 & DBCR0_IAC1) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC12MODE) { > /* address range - clear slots 1 & 2 */ > - child->thread.iac2 = 0; > + child->thread.debug.iac2 = 0; > dbcr_iac_range(child) &= ~DBCR_IAC12MODE; > } > - child->thread.iac1 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC1; > + child->thread.debug.iac1 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC1; > break; > case 2: > - if ((child->thread.dbcr0 & DBCR0_IAC2) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC12MODE) > /* used in a range */ > return -EINVAL; > - child->thread.iac2 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC2; > + child->thread.debug.iac2 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC2; > break; > #if CONFIG_PPC_ADV_DEBUG_IACS > 2 > case 3: > - if ((child->thread.dbcr0 & DBCR0_IAC3) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC34MODE) { > /* address range - clear slots 3 & 4 */ > - child->thread.iac4 = 0; > + child->thread.debug.iac4 = 0; > dbcr_iac_range(child) &= ~DBCR_IAC34MODE; > } > - child->thread.iac3 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC3; > + child->thread.debug.iac3 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC3; > break; > case 4: > - if ((child->thread.dbcr0 & DBCR0_IAC4) == 0) > + if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0) > return -ENOENT; > > if (dbcr_iac_range(child) & DBCR_IAC34MODE) > /* Used in a range */ > return -EINVAL; > - child->thread.iac4 = 0; > - child->thread.dbcr0 &= ~DBCR0_IAC4; > + child->thread.debug.iac4 = 0; > + child->thread.debug.dbcr0 &= ~DBCR0_IAC4; > break; > #endif > default: > @@ -1240,18 +1240,18 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) > dbcr_dac(child) |= DBCR_DAC1R; > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) > dbcr_dac(child) |= DBCR_DAC1W; > - child->thread.dac1 = (unsigned long)bp_info->addr; > + child->thread.debug.dac1 = (unsigned long)bp_info->addr; > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > if (byte_enable) { > - child->thread.dvc1 = > + child->thread.debug.dvc1 = > (unsigned long)bp_info->condition_value; > - child->thread.dbcr2 |= > + child->thread.debug.dbcr2 |= > ((byte_enable << DBCR2_DVC1BE_SHIFT) | > (condition_mode << DBCR2_DVC1M_SHIFT)); > } > #endif > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - } else if (child->thread.dbcr2 & DBCR2_DAC12MODE) { > + } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { > /* Both dac1 and dac2 are part of a range */ > return -ENOSPC; > #endif > @@ -1261,19 +1261,19 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) > dbcr_dac(child) |= DBCR_DAC2R; > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) > dbcr_dac(child) |= DBCR_DAC2W; > - child->thread.dac2 = (unsigned long)bp_info->addr; > + child->thread.debug.dac2 = (unsigned long)bp_info->addr; > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > if (byte_enable) { > - child->thread.dvc2 = > + child->thread.debug.dvc2 = > (unsigned long)bp_info->condition_value; > - child->thread.dbcr2 |= > + child->thread.debug.dbcr2 |= > ((byte_enable << DBCR2_DVC2BE_SHIFT) | > (condition_mode << DBCR2_DVC2M_SHIFT)); > } > #endif > } else > return -ENOSPC; > - child->thread.dbcr0 |= DBCR0_IDM; > + child->thread.debug.dbcr0 |= DBCR0_IDM; > child->thread.regs->msr |= MSR_DE; > > return slot + 4; > @@ -1285,32 +1285,32 @@ static int del_dac(struct task_struct *child, int slot) > if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) > return -ENOENT; > > - child->thread.dac1 = 0; > + child->thread.debug.dac1 = 0; > dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W); > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - if (child->thread.dbcr2 & DBCR2_DAC12MODE) { > - child->thread.dac2 = 0; > - child->thread.dbcr2 &= ~DBCR2_DAC12MODE; > + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) { > + child->thread.debug.dac2 = 0; > + child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; > } > - child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); > + child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); > #endif > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - child->thread.dvc1 = 0; > + child->thread.debug.dvc1 = 0; > #endif > } else if (slot == 2) { > if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) > return -ENOENT; > > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - if (child->thread.dbcr2 & DBCR2_DAC12MODE) > + if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) > /* Part of a range */ > return -EINVAL; > - child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); > + child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); > #endif > #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 > - child->thread.dvc2 = 0; > + child->thread.debug.dvc2 = 0; > #endif > - child->thread.dac2 = 0; > + child->thread.debug.dac2 = 0; > dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W); > } else > return -EINVAL; > @@ -1352,22 +1352,22 @@ static int set_dac_range(struct task_struct *child, > return -EIO; > } > > - if (child->thread.dbcr0 & > + if (child->thread.debug.dbcr0 & > (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)) > return -ENOSPC; > > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) > - child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); > + child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); > if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) > - child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); > - child->thread.dac1 = bp_info->addr; > - child->thread.dac2 = bp_info->addr2; > + child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); > + child->thread.debug.dac1 = bp_info->addr; > + child->thread.debug.dac2 = bp_info->addr2; > if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) > - child->thread.dbcr2 |= DBCR2_DAC12M; > + child->thread.debug.dbcr2 |= DBCR2_DAC12M; > else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) > - child->thread.dbcr2 |= DBCR2_DAC12MX; > + child->thread.debug.dbcr2 |= DBCR2_DAC12MX; > else /* PPC_BREAKPOINT_MODE_MASK */ > - child->thread.dbcr2 |= DBCR2_DAC12MM; > + child->thread.debug.dbcr2 |= DBCR2_DAC12MM; > child->thread.regs->msr |= MSR_DE; > > return 5; > @@ -1507,9 +1507,9 @@ static long ppc_del_hwdebug(struct task_struct *child, long data) > rc = del_dac(child, (int)data - 4); > > if (!rc) { > - if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0, > - child->thread.dbcr1)) { > - child->thread.dbcr0 &= ~DBCR0_IDM; > + if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0, > + child->thread.debug.dbcr1)) { > + child->thread.debug.dbcr0 &= ~DBCR0_IDM; > child->thread.regs->msr &= ~MSR_DE; > } > } > @@ -1691,7 +1691,7 @@ long arch_ptrace(struct task_struct *child, long request, > if (addr > 0) > break; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - ret = put_user(child->thread.dac1, datalp); > + ret = put_user(child->thread.debug.dac1, datalp); > #else > dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | > (child->thread.hw_brk.type & HW_BRK_TYPE_DABR)); > diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c > index f51599e..18c7c65 100644 > --- a/arch/powerpc/kernel/ptrace32.c > +++ b/arch/powerpc/kernel/ptrace32.c > @@ -269,7 +269,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, > if (addr > 0) > break; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - ret = put_user(child->thread.dac1, (u32 __user *)data); > + ret = put_user(child->thread.debug.dac1, (u32 __user *)data); > #else > dabr_fake = ( > (child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) | > diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c > index 0f83122..f5be6f1 100644 > --- a/arch/powerpc/kernel/signal_32.c > +++ b/arch/powerpc/kernel/signal_32.c > @@ -1300,7 +1300,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, > unsigned char tmp; > unsigned long new_msr = regs->msr; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - unsigned long new_dbcr0 = current->thread.dbcr0; > + unsigned long new_dbcr0 = current->thread.debug.dbcr0; > #endif > > for (i=0; i<ndbg; i++) { > @@ -1315,7 +1315,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, > } else { > new_dbcr0 &= ~DBCR0_IC; > if (!DBCR_ACTIVE_EVENTS(new_dbcr0, > - current->thread.dbcr1)) { > + current->thread.debug.dbcr1)) { > new_msr &= ~MSR_DE; > new_dbcr0 &= ~DBCR0_IDM; > } > @@ -1350,7 +1350,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, > the user is really doing something wrong. */ > regs->msr = new_msr; > #ifdef CONFIG_PPC_ADV_DEBUG_REGS > - current->thread.dbcr0 = new_dbcr0; > + current->thread.debug.dbcr0 = new_dbcr0; > #endif > > if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)) > diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c > index bf33c22..1998685 100644 > --- a/arch/powerpc/kernel/traps.c > +++ b/arch/powerpc/kernel/traps.c > @@ -352,8 +352,8 @@ static inline int check_io_access(struct pt_regs *regs) > #define REASON_TRAP ESR_PTR > > /* single-step stuff */ > -#define single_stepping(regs) (current->thread.dbcr0 & DBCR0_IC) > -#define clear_single_step(regs) (current->thread.dbcr0 &= ~DBCR0_IC) > +#define single_stepping(regs) (current->thread.debug.dbcr0 & DBCR0_IC) > +#define clear_single_step(regs) (current->thread.debug.dbcr0 &= ~DBCR0_IC) > > #else > /* On non-4xx, the reason for the machine check or program > @@ -1485,7 +1485,7 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) > if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { > dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W); > #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE > - current->thread.dbcr2 &= ~DBCR2_DAC12MODE; > + current->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE; > #endif > do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT, > 5); > @@ -1496,24 +1496,24 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) > 6); > changed |= 0x01; > } else if (debug_status & DBSR_IAC1) { > - current->thread.dbcr0 &= ~DBCR0_IAC1; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC1; > dbcr_iac_range(current) &= ~DBCR_IAC12MODE; > do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT, > 1); > changed |= 0x01; > } else if (debug_status & DBSR_IAC2) { > - current->thread.dbcr0 &= ~DBCR0_IAC2; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC2; > do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT, > 2); > changed |= 0x01; > } else if (debug_status & DBSR_IAC3) { > - current->thread.dbcr0 &= ~DBCR0_IAC3; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC3; > dbcr_iac_range(current) &= ~DBCR_IAC34MODE; > do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT, > 3); > changed |= 0x01; > } else if (debug_status & DBSR_IAC4) { > - current->thread.dbcr0 &= ~DBCR0_IAC4; > + current->thread.debug.dbcr0 &= ~DBCR0_IAC4; > do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT, > 4); > changed |= 0x01; > @@ -1523,19 +1523,20 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status) > * Check all other debug flags and see if that bit needs to be turned > * back on or not. > */ > - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) > + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, > + current->thread.debug.dbcr1)) > regs->msr |= MSR_DE; > else > /* Make sure the IDM flag is off */ > - current->thread.dbcr0 &= ~DBCR0_IDM; > + current->thread.debug.dbcr0 &= ~DBCR0_IDM; > > if (changed & 0x01) > - mtspr(SPRN_DBCR0, current->thread.dbcr0); > + mtspr(SPRN_DBCR0, current->thread.debug.dbcr0); > } > > void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) > { > - current->thread.dbsr = debug_status; > + current->thread.debug.dbsr = debug_status; > > /* Hack alert: On BookE, Branch Taken stops on the branch itself, while > * on server, it stops on the target of the branch. In order to simulate > @@ -1552,8 +1553,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) > > /* Do the single step trick only when coming from userspace */ > if (user_mode(regs)) { > - current->thread.dbcr0 &= ~DBCR0_BT; > - current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; > + current->thread.debug.dbcr0 &= ~DBCR0_BT; > + current->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC; > regs->msr |= MSR_DE; > return; > } > @@ -1581,13 +1582,13 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) > return; > > if (user_mode(regs)) { > - current->thread.dbcr0 &= ~DBCR0_IC; > - if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, > - current->thread.dbcr1)) > + current->thread.debug.dbcr0 &= ~DBCR0_IC; > + if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0, > + current->thread.debug.dbcr1)) > regs->msr |= MSR_DE; > else > /* Make sure the IDM bit is off */ > - current->thread.dbcr0 &= ~DBCR0_IDM; > + current->thread.debug.dbcr0 &= ~DBCR0_IDM; > } > > _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); > -- > 1.7.0.4 > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-04 6:15 [PATCH 0/2] powerpc: allow kvm to use kerel debug framework Bharat Bhushan @ 2013-07-09 1:00 ` Alexander Graf 2013-07-04 6:15 ` Bharat Bhushan 2013-07-09 1:00 ` Alexander Graf 2 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-09 1:00 UTC (permalink / raw) To: Bharat Bhushan Cc: linuxppc-dev, mikey, benh, linux-kernel, scottwood, Bharat Bhushan On 04.07.2013, at 08:15, Bharat Bhushan wrote: > From: Bharat Bhushan <bharat.bhushan@freescale.com> > > This patchset moves the debug registers in a structure, which allows > kvm to use same structure for debug emulation. > > Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" > was sent which is a bunch of six patches. That patchset is divided into two parts: > 1) powerpc specific changes (These 2 patches are actually have those changes) > 2) KVM specific changes (will send separate patch on agraf repository) Mikey, if you like those could you please apply the into a topic branch and get that one merged with Ben? I'd also pull it into my tree then. Alex > > Bharat Bhushan (2): > powerpc: remove unnecessary line continuations > powerpc: move debug registers in a structure > > arch/powerpc/include/asm/processor.h | 38 +++++---- > arch/powerpc/include/asm/reg_booke.h | 8 +- > arch/powerpc/kernel/asm-offsets.c | 2 +- > arch/powerpc/kernel/process.c | 42 +++++----- > arch/powerpc/kernel/ptrace.c | 154 +++++++++++++++++----------------- > arch/powerpc/kernel/ptrace32.c | 2 +- > arch/powerpc/kernel/signal_32.c | 6 +- > arch/powerpc/kernel/traps.c | 35 ++++---- > 8 files changed, 147 insertions(+), 140 deletions(-) > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-07-09 1:00 ` Alexander Graf 0 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-09 1:00 UTC (permalink / raw) To: Bharat Bhushan Cc: mikey, linux-kernel, Bharat Bhushan, scottwood, linuxppc-dev On 04.07.2013, at 08:15, Bharat Bhushan wrote: > From: Bharat Bhushan <bharat.bhushan@freescale.com> >=20 > This patchset moves the debug registers in a structure, which allows > kvm to use same structure for debug emulation. >=20 > Note: Earilier a patchset = "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" > was sent which is a bunch of six patches. That patchset is divided = into two parts: > 1) powerpc specific changes (These 2 patches are actually have = those changes) > 2) KVM specific changes (will send separate patch on agraf = repository) Mikey, if you like those could you please apply the into a topic branch = and get that one merged with Ben? I'd also pull it into my tree then. Alex >=20 > Bharat Bhushan (2): > powerpc: remove unnecessary line continuations > powerpc: move debug registers in a structure >=20 > arch/powerpc/include/asm/processor.h | 38 +++++---- > arch/powerpc/include/asm/reg_booke.h | 8 +- > arch/powerpc/kernel/asm-offsets.c | 2 +- > arch/powerpc/kernel/process.c | 42 +++++----- > arch/powerpc/kernel/ptrace.c | 154 = +++++++++++++++++----------------- > arch/powerpc/kernel/ptrace32.c | 2 +- > arch/powerpc/kernel/signal_32.c | 6 +- > arch/powerpc/kernel/traps.c | 35 ++++---- > 8 files changed, 147 insertions(+), 140 deletions(-) >=20 >=20 ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-09 1:00 ` Alexander Graf @ 2013-07-09 4:24 ` Michael Neuling -1 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-09 4:24 UTC (permalink / raw) To: Alexander Graf Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan Alexander Graf <agraf@suse.de> wrote: > > On 04.07.2013, at 08:15, Bharat Bhushan wrote: > > > From: Bharat Bhushan <bharat.bhushan@freescale.com> > > > > This patchset moves the debug registers in a structure, which allows > > kvm to use same structure for debug emulation. > > > > Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" > > was sent which is a bunch of six patches. That patchset is divided into two parts: > > 1) powerpc specific changes (These 2 patches are actually have those changes) > > 2) KVM specific changes (will send separate patch on agraf repository) > > Mikey, if you like those could you please apply the into a topic > branch and get that one merged with Ben? I'd also pull it into my tree > then. benh would pull these directly. I'll have a chat with him to see if he wants my ACK before he does that. Mikey ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-07-09 4:24 ` Michael Neuling 0 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-09 4:24 UTC (permalink / raw) To: Alexander Graf Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev Alexander Graf <agraf@suse.de> wrote: > > On 04.07.2013, at 08:15, Bharat Bhushan wrote: > > > From: Bharat Bhushan <bharat.bhushan@freescale.com> > > > > This patchset moves the debug registers in a structure, which allows > > kvm to use same structure for debug emulation. > > > > Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" > > was sent which is a bunch of six patches. That patchset is divided into two parts: > > 1) powerpc specific changes (These 2 patches are actually have those changes) > > 2) KVM specific changes (will send separate patch on agraf repository) > > Mikey, if you like those could you please apply the into a topic > branch and get that one merged with Ben? I'd also pull it into my tree > then. benh would pull these directly. I'll have a chat with him to see if he wants my ACK before he does that. Mikey ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-09 4:24 ` Michael Neuling @ 2013-07-09 21:54 ` Alexander Graf -1 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-09 21:54 UTC (permalink / raw) To: Michael Neuling Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan On 09.07.2013, at 06:24, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: > >> >> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >> >>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>> >>> This patchset moves the debug registers in a structure, which allows >>> kvm to use same structure for debug emulation. >>> >>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>> was sent which is a bunch of six patches. That patchset is divided into two parts: >>> 1) powerpc specific changes (These 2 patches are actually have those changes) >>> 2) KVM specific changes (will send separate patch on agraf repository) >> >> Mikey, if you like those could you please apply the into a topic >> branch and get that one merged with Ben? I'd also pull it into my tree >> then. > > benh would pull these directly. > > I'll have a chat with him to see if he wants my ACK before he does that. I have a bunch of patches that I need to apply on top, so I need a topic branch. Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-07-09 21:54 ` Alexander Graf 0 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-09 21:54 UTC (permalink / raw) To: Michael Neuling Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev On 09.07.2013, at 06:24, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: >=20 >>=20 >> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>=20 >>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>=20 >>> This patchset moves the debug registers in a structure, which allows >>> kvm to use same structure for debug emulation. >>>=20 >>> Note: Earilier a patchset = "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>> was sent which is a bunch of six patches. That patchset is divided = into two parts: >>> 1) powerpc specific changes (These 2 patches are actually have = those changes) >>> 2) KVM specific changes (will send separate patch on agraf = repository) >>=20 >> Mikey, if you like those could you please apply the into a topic >> branch and get that one merged with Ben? I'd also pull it into my = tree >> then. >=20 > benh would pull these directly. =20 >=20 > I'll have a chat with him to see if he wants my ACK before he does = that. I have a bunch of patches that I need to apply on top, so I need a topic = branch. Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-09 21:54 ` Alexander Graf @ 2013-07-10 7:25 ` Michael Neuling -1 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-10 7:25 UTC (permalink / raw) To: Alexander Graf Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan Alexander Graf <agraf@suse.de> wrote: > > On 09.07.2013, at 06:24, Michael Neuling wrote: > > > Alexander Graf <agraf@suse.de> wrote: > > > >> > >> On 04.07.2013, at 08:15, Bharat Bhushan wrote: > >> > >>> From: Bharat Bhushan <bharat.bhushan@freescale.com> > >>> > >>> This patchset moves the debug registers in a structure, which allows > >>> kvm to use same structure for debug emulation. > >>> > >>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" > >>> was sent which is a bunch of six patches. That patchset is divided into two parts: > >>> 1) powerpc specific changes (These 2 patches are actually have those changes) > >>> 2) KVM specific changes (will send separate patch on agraf repository) > >> > >> Mikey, if you like those could you please apply the into a topic > >> branch and get that one merged with Ben? I'd also pull it into my tree > >> then. > > > > benh would pull these directly. > > > > I'll have a chat with him to see if he wants my ACK before he does that. > > I have a bunch of patches that I need to apply on top, so I need a topic branch. I've acked the PPC specific bits of the v6 version of these patches. benh said he'll open a topic branch for you sometime next week and he'll stick them in there. Mikey ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-07-10 7:25 ` Michael Neuling 0 siblings, 0 replies; 25+ messages in thread From: Michael Neuling @ 2013-07-10 7:25 UTC (permalink / raw) To: Alexander Graf Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev Alexander Graf <agraf@suse.de> wrote: > > On 09.07.2013, at 06:24, Michael Neuling wrote: > > > Alexander Graf <agraf@suse.de> wrote: > > > >> > >> On 04.07.2013, at 08:15, Bharat Bhushan wrote: > >> > >>> From: Bharat Bhushan <bharat.bhushan@freescale.com> > >>> > >>> This patchset moves the debug registers in a structure, which allows > >>> kvm to use same structure for debug emulation. > >>> > >>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" > >>> was sent which is a bunch of six patches. That patchset is divided into two parts: > >>> 1) powerpc specific changes (These 2 patches are actually have those changes) > >>> 2) KVM specific changes (will send separate patch on agraf repository) > >> > >> Mikey, if you like those could you please apply the into a topic > >> branch and get that one merged with Ben? I'd also pull it into my tree > >> then. > > > > benh would pull these directly. > > > > I'll have a chat with him to see if he wants my ACK before he does that. > > I have a bunch of patches that I need to apply on top, so I need a topic branch. I've acked the PPC specific bits of the v6 version of these patches. benh said he'll open a topic branch for you sometime next week and he'll stick them in there. Mikey ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-10 7:25 ` Michael Neuling @ 2013-07-10 7:50 ` Alexander Graf -1 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-10 7:50 UTC (permalink / raw) To: Michael Neuling Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan Am 10.07.2013 um 09:25 schrieb Michael Neuling <mikey@neuling.org>: > Alexander Graf <agraf@suse.de> wrote: > >> >> On 09.07.2013, at 06:24, Michael Neuling wrote: >> >>> Alexander Graf <agraf@suse.de> wrote: >>> >>>> >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>> >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>> >>>>> This patchset moves the debug registers in a structure, which allows >>>>> kvm to use same structure for debug emulation. >>>>> >>>>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf repository) >>>> >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my tree >>>> then. >>> >>> benh would pull these directly. >>> >>> I'll have a chat with him to see if he wants my ACK before he does that. >> >> I have a bunch of patches that I need to apply on top, so I need a topic branch. > > I've acked the PPC specific bits of the v6 version of these patches. > > benh said he'll open a topic branch for you sometime next week and he'll > stick them in there. Ok, thanks :) Alex > > Mikey > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-07-10 7:50 ` Alexander Graf 0 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-10 7:50 UTC (permalink / raw) To: Michael Neuling Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev Am 10.07.2013 um 09:25 schrieb Michael Neuling <mikey@neuling.org>: > Alexander Graf <agraf@suse.de> wrote: >=20 >>=20 >> On 09.07.2013, at 06:24, Michael Neuling wrote: >>=20 >>> Alexander Graf <agraf@suse.de> wrote: >>>=20 >>>>=20 >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>>=20 >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>>=20 >>>>> This patchset moves the debug registers in a structure, which allows >>>>> kvm to use same structure for debug emulation. >>>>>=20 >>>>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc= -dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided int= o two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have thos= e changes) >>>>> 2) KVM specific changes (will send separate patch on agraf reposito= ry) >>>>=20 >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my tree >>>> then. >>>=20 >>> benh would pull these directly. =20 >>>=20 >>> I'll have a chat with him to see if he wants my ACK before he does that.= >>=20 >> I have a bunch of patches that I need to apply on top, so I need a topic b= ranch. >=20 > I've acked the PPC specific bits of the v6 version of these patches. >=20 > benh said he'll open a topic branch for you sometime next week and he'll > stick them in there. =20 Ok, thanks :) Alex >=20 > Mikey >=20 ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-10 7:25 ` Michael Neuling @ 2013-07-25 10:17 ` Alexander Graf -1 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-25 10:17 UTC (permalink / raw) To: Michael Neuling Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan On 10.07.2013, at 09:25, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: > >> >> On 09.07.2013, at 06:24, Michael Neuling wrote: >> >>> Alexander Graf <agraf@suse.de> wrote: >>> >>>> >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>> >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>> >>>>> This patchset moves the debug registers in a structure, which allows >>>>> kvm to use same structure for debug emulation. >>>>> >>>>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf repository) >>>> >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my tree >>>> then. >>> >>> benh would pull these directly. >>> >>> I'll have a chat with him to see if he wants my ACK before he does that. >> >> I have a bunch of patches that I need to apply on top, so I need a topic branch. > > I've acked the PPC specific bits of the v6 version of these patches. > > benh said he'll open a topic branch for you sometime next week and he'll > stick them in there. Ping? :) Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-07-25 10:17 ` Alexander Graf 0 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-07-25 10:17 UTC (permalink / raw) To: Michael Neuling Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev On 10.07.2013, at 09:25, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: >=20 >>=20 >> On 09.07.2013, at 06:24, Michael Neuling wrote: >>=20 >>> Alexander Graf <agraf@suse.de> wrote: >>>=20 >>>>=20 >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>>=20 >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>>=20 >>>>> This patchset moves the debug registers in a structure, which = allows >>>>> kvm to use same structure for debug emulation. >>>>>=20 >>>>> Note: Earilier a patchset = "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided = into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have = those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf = repository) >>>>=20 >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my = tree >>>> then. >>>=20 >>> benh would pull these directly. =20 >>>=20 >>> I'll have a chat with him to see if he wants my ACK before he does = that. >>=20 >> I have a bunch of patches that I need to apply on top, so I need a = topic branch. >=20 > I've acked the PPC specific bits of the v6 version of these patches. >=20 > benh said he'll open a topic branch for you sometime next week and = he'll > stick them in there. =20 Ping? :) Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-10 7:25 ` Michael Neuling @ 2013-09-12 14:29 ` Alexander Graf -1 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-09-12 14:29 UTC (permalink / raw) To: Michael Neuling Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan On 10.07.2013, at 02:25, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: > >> >> On 09.07.2013, at 06:24, Michael Neuling wrote: >> >>> Alexander Graf <agraf@suse.de> wrote: >>> >>>> >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>> >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>> >>>>> This patchset moves the debug registers in a structure, which allows >>>>> kvm to use same structure for debug emulation. >>>>> >>>>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf repository) >>>> >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my tree >>>> then. >>> >>> benh would pull these directly. >>> >>> I'll have a chat with him to see if he wants my ACK before he does that. >> >> I have a bunch of patches that I need to apply on top, so I need a topic branch. > > I've acked the PPC specific bits of the v6 version of these patches. > > benh said he'll open a topic branch for you sometime next week and he'll > stick them in there. Did anything happen here? Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-09-12 14:29 ` Alexander Graf 0 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-09-12 14:29 UTC (permalink / raw) To: Michael Neuling Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev On 10.07.2013, at 02:25, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: >=20 >>=20 >> On 09.07.2013, at 06:24, Michael Neuling wrote: >>=20 >>> Alexander Graf <agraf@suse.de> wrote: >>>=20 >>>>=20 >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>>=20 >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>>=20 >>>>> This patchset moves the debug registers in a structure, which = allows >>>>> kvm to use same structure for debug emulation. >>>>>=20 >>>>> Note: Earilier a patchset = "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided = into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have = those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf = repository) >>>>=20 >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my = tree >>>> then. >>>=20 >>> benh would pull these directly. =20 >>>=20 >>> I'll have a chat with him to see if he wants my ACK before he does = that. >>=20 >> I have a bunch of patches that I need to apply on top, so I need a = topic branch. >=20 > I've acked the PPC specific bits of the v6 version of these patches. >=20 > benh said he'll open a topic branch for you sometime next week and = he'll > stick them in there. =20 Did anything happen here? Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework 2013-07-10 7:25 ` Michael Neuling @ 2013-10-04 14:40 ` Alexander Graf -1 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-10-04 14:40 UTC (permalink / raw) To: Michael Neuling Cc: Bharat Bhushan, linuxppc-dev, benh, linux-kernel, scottwood, Bharat Bhushan On 10.07.2013, at 09:25, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: > >> >> On 09.07.2013, at 06:24, Michael Neuling wrote: >> >>> Alexander Graf <agraf@suse.de> wrote: >>> >>>> >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>> >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>> >>>>> This patchset moves the debug registers in a structure, which allows >>>>> kvm to use same structure for debug emulation. >>>>> >>>>> Note: Earilier a patchset "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf repository) >>>> >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my tree >>>> then. >>> >>> benh would pull these directly. >>> >>> I'll have a chat with him to see if he wants my ACK before he does that. >> >> I have a bunch of patches that I need to apply on top, so I need a topic branch. > > I've acked the PPC specific bits of the v6 version of these patches. > > benh said he'll open a topic branch for you sometime next week and he'll > stick them in there. After talking to Ben about it, I've just put these into kvm-ppc-queue, so they will hit Linus' tree through the kvm tree. Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/2] powerpc: allow kvm to use kerel debug framework @ 2013-10-04 14:40 ` Alexander Graf 0 siblings, 0 replies; 25+ messages in thread From: Alexander Graf @ 2013-10-04 14:40 UTC (permalink / raw) To: Michael Neuling Cc: linux-kernel, Bharat Bhushan, Bharat Bhushan, scottwood, linuxppc-dev On 10.07.2013, at 09:25, Michael Neuling wrote: > Alexander Graf <agraf@suse.de> wrote: >=20 >>=20 >> On 09.07.2013, at 06:24, Michael Neuling wrote: >>=20 >>> Alexander Graf <agraf@suse.de> wrote: >>>=20 >>>>=20 >>>> On 04.07.2013, at 08:15, Bharat Bhushan wrote: >>>>=20 >>>>> From: Bharat Bhushan <bharat.bhushan@freescale.com> >>>>>=20 >>>>> This patchset moves the debug registers in a structure, which = allows >>>>> kvm to use same structure for debug emulation. >>>>>=20 >>>>> Note: Earilier a patchset = "https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-June/108132.html" >>>>> was sent which is a bunch of six patches. That patchset is divided = into two parts: >>>>> 1) powerpc specific changes (These 2 patches are actually have = those changes) >>>>> 2) KVM specific changes (will send separate patch on agraf = repository) >>>>=20 >>>> Mikey, if you like those could you please apply the into a topic >>>> branch and get that one merged with Ben? I'd also pull it into my = tree >>>> then. >>>=20 >>> benh would pull these directly. =20 >>>=20 >>> I'll have a chat with him to see if he wants my ACK before he does = that. >>=20 >> I have a bunch of patches that I need to apply on top, so I need a = topic branch. >=20 > I've acked the PPC specific bits of the v6 version of these patches. >=20 > benh said he'll open a topic branch for you sometime next week and = he'll > stick them in there. =20 After talking to Ben about it, I've just put these into kvm-ppc-queue, = so they will hit Linus' tree through the kvm tree. Alex ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2013-10-04 14:41 UTC | newest] Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-07-04 6:15 [PATCH 0/2] powerpc: allow kvm to use kerel debug framework Bharat Bhushan 2013-07-04 6:15 ` [PATCH 1/2] powerpc: remove unnecessary line continuations Bharat Bhushan 2013-07-04 6:15 ` Bharat Bhushan 2013-07-10 7:25 ` Michael Neuling 2013-07-10 7:25 ` Michael Neuling 2013-07-04 6:15 ` [PATCH 2/2] powerpc: move debug registers in a structure Bharat Bhushan 2013-07-04 6:15 ` Bharat Bhushan 2013-07-10 7:25 ` Michael Neuling 2013-07-10 7:25 ` Michael Neuling 2013-07-09 1:00 ` [PATCH 0/2] powerpc: allow kvm to use kerel debug framework Alexander Graf 2013-07-09 1:00 ` Alexander Graf 2013-07-09 4:24 ` Michael Neuling 2013-07-09 4:24 ` Michael Neuling 2013-07-09 21:54 ` Alexander Graf 2013-07-09 21:54 ` Alexander Graf 2013-07-10 7:25 ` Michael Neuling 2013-07-10 7:25 ` Michael Neuling 2013-07-10 7:50 ` Alexander Graf 2013-07-10 7:50 ` Alexander Graf 2013-07-25 10:17 ` Alexander Graf 2013-07-25 10:17 ` Alexander Graf 2013-09-12 14:29 ` Alexander Graf 2013-09-12 14:29 ` Alexander Graf 2013-10-04 14:40 ` Alexander Graf 2013-10-04 14:40 ` Alexander Graf
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.