All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
To: "Stephen Boyd" <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Andreas Färber" <afaerber@suse.de>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Edgar Bernardi Righi" <edgar.righi@lsitec.org.br>
Cc: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
Date: Thu, 10 Jun 2021 23:05:24 +0300	[thread overview]
Message-ID: <21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com> (raw)
In-Reply-To: <cover.1623354574.git.cristian.ciocaltea@gmail.com>

There are a few issues with the setup of the Actions Semi Owl S500 SoC's
clock chain involving AHPPREDIV, H and AHB clocks:

* AHBPREDIV clock is defined as a muxer only, although it also acts as
  a divider.
* H clock is using a wrong divider register offset
* AHB is defined as a multi-rate factor clock, but it is actually just
  a fixed pass clock.

Let's provide the following fixes:

* Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition.
* Use the correct register shift value in the OWL_DIVIDER definition
  for H clock
* Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an
  ungated OWL_COMP_FIXED_FACTOR definition.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
Changes in v3:
 - Fixed the swapped flags between "ahbprediv_clk" and "ahb_clk" as noticed
   by Mani

Changes in v2:
 - Reverted the addition of the clock div table for H clock to support the
   '1' divider (according to the datasheet), even though the vendor
   implementation marks it as reserved
 
 drivers/clk/actions/owl-s500.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
index 42d6899755e6..cbeb51c804eb 100644
--- a/drivers/clk/actions/owl-s500.c
+++ b/drivers/clk/actions/owl-s500.c
@@ -153,11 +153,6 @@ static struct clk_factor_table hde_factor_table[] = {
 	{ 0, 0, 0 },
 };
 
-static struct clk_factor_table ahb_factor_table[] = {
-	{ 1, 1, 2 }, { 2, 1, 3 },
-	{ 0, 0, 0 },
-};
-
 static struct clk_div_table rmii_ref_div_table[] = {
 	{ 0, 4 }, { 1, 10 },
 	{ 0, 0 },
@@ -186,7 +181,6 @@ static struct clk_div_table nand_div_table[] = {
 
 /* mux clock */
 static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RATE_PARENT);
-static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
 
 /* gate clocks */
 static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
@@ -199,16 +193,25 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
 static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
-static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, NULL, 0, 0);
 static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
-static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0);
 static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0);
 static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
 
 /* composite clocks */
+static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p,
+			OWL_MUX_HW(CMU_BUSCLK1, 8, 3),
+			{ 0 },
+			OWL_DIVIDER_HW(CMU_BUSCLK1, 12, 2, 0, NULL),
+			CLK_SET_RATE_PARENT);
+
+static OWL_COMP_FIXED_FACTOR(ahb_clk, "ahb_clk", "h_clk",
+			{ 0 },
+			1, 1, 0);
+
 static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p,
 			OWL_MUX_HW(CMU_VCECLK, 4, 2),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0),
-- 
2.32.0


WARNING: multiple messages have this Message-ID (diff)
From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
To: "Stephen Boyd" <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Andreas Färber" <afaerber@suse.de>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Edgar Bernardi Righi" <edgar.righi@lsitec.org.br>
Cc: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
Date: Thu, 10 Jun 2021 23:05:24 +0300	[thread overview]
Message-ID: <21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com> (raw)
In-Reply-To: <cover.1623354574.git.cristian.ciocaltea@gmail.com>

There are a few issues with the setup of the Actions Semi Owl S500 SoC's
clock chain involving AHPPREDIV, H and AHB clocks:

* AHBPREDIV clock is defined as a muxer only, although it also acts as
  a divider.
* H clock is using a wrong divider register offset
* AHB is defined as a multi-rate factor clock, but it is actually just
  a fixed pass clock.

Let's provide the following fixes:

* Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition.
* Use the correct register shift value in the OWL_DIVIDER definition
  for H clock
* Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an
  ungated OWL_COMP_FIXED_FACTOR definition.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
Changes in v3:
 - Fixed the swapped flags between "ahbprediv_clk" and "ahb_clk" as noticed
   by Mani

Changes in v2:
 - Reverted the addition of the clock div table for H clock to support the
   '1' divider (according to the datasheet), even though the vendor
   implementation marks it as reserved
 
 drivers/clk/actions/owl-s500.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
index 42d6899755e6..cbeb51c804eb 100644
--- a/drivers/clk/actions/owl-s500.c
+++ b/drivers/clk/actions/owl-s500.c
@@ -153,11 +153,6 @@ static struct clk_factor_table hde_factor_table[] = {
 	{ 0, 0, 0 },
 };
 
-static struct clk_factor_table ahb_factor_table[] = {
-	{ 1, 1, 2 }, { 2, 1, 3 },
-	{ 0, 0, 0 },
-};
-
 static struct clk_div_table rmii_ref_div_table[] = {
 	{ 0, 4 }, { 1, 10 },
 	{ 0, 0 },
@@ -186,7 +181,6 @@ static struct clk_div_table nand_div_table[] = {
 
 /* mux clock */
 static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RATE_PARENT);
-static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
 
 /* gate clocks */
 static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
@@ -199,16 +193,25 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
 static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
-static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, NULL, 0, 0);
 static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
-static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0);
 static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0);
 static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
 
 /* composite clocks */
+static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p,
+			OWL_MUX_HW(CMU_BUSCLK1, 8, 3),
+			{ 0 },
+			OWL_DIVIDER_HW(CMU_BUSCLK1, 12, 2, 0, NULL),
+			CLK_SET_RATE_PARENT);
+
+static OWL_COMP_FIXED_FACTOR(ahb_clk, "ahb_clk", "h_clk",
+			{ 0 },
+			1, 1, 0);
+
 static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p,
 			OWL_MUX_HW(CMU_VCECLK, 4, 2),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0),
-- 
2.32.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-06-10 20:05 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-10 20:05 [PATCH v3 0/6] Improve clock support for Actions S500 SoC Cristian Ciocaltea
2021-06-10 20:05 ` Cristian Ciocaltea
2021-06-10 20:05 ` [PATCH v3 1/6] clk: actions: Fix UART clock dividers on Owl " Cristian Ciocaltea
2021-06-10 20:05   ` Cristian Ciocaltea
2021-06-28  1:46   ` Stephen Boyd
2021-06-28  1:46     ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 2/6] clk: actions: Fix SD clocks factor table " Cristian Ciocaltea
2021-06-10 20:05   ` Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-28  1:47     ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 3/6] clk: actions: Fix bisp_factor_table based clocks " Cristian Ciocaltea
2021-06-10 20:05   ` Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-28  1:47     ` Stephen Boyd
2021-06-10 20:05 ` Cristian Ciocaltea [this message]
2021-06-10 20:05   ` [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain " Cristian Ciocaltea
2021-06-11  4:11   ` Manivannan Sadhasivam
2021-06-11  4:11     ` Manivannan Sadhasivam
2021-06-28  1:47   ` Stephen Boyd
2021-06-28  1:47     ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 5/6] dt-bindings: clock: Add NIC and ETHERNET bindings for Actions " Cristian Ciocaltea
2021-06-10 20:05   ` Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-28  1:47     ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 6/6] clk: actions: Add NIC and ETHERNET clock support " Cristian Ciocaltea
2021-06-10 20:05   ` Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-28  1:47     ` Stephen Boyd
2021-06-16 16:06 ` [PATCH v3 0/6] Improve " Cristian Ciocaltea
2021-06-16 16:06   ` Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com \
    --to=cristian.ciocaltea@gmail.com \
    --cc=afaerber@suse.de \
    --cc=devicetree@vger.kernel.org \
    --cc=edgar.righi@lsitec.org.br \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.