All of lore.kernel.org
 help / color / mirror / Atom feed
From: Auger Eric <eric.auger@redhat.com>
To: Liu Yi L <yi.l.liu@intel.com>,
	alex.williamson@redhat.com, baolu.lu@linux.intel.com,
	joro@8bytes.org
Cc: kevin.tian@intel.com, jacob.jun.pan@linux.intel.com,
	ashok.raj@intel.com, jun.j.tian@intel.com, yi.y.sun@intel.com,
	jean-philippe@linaro.org, peterx@redhat.com, hao.wu@intel.com,
	stefanha@gmail.com, iommu@lists.linux-foundation.org,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 04/15] vfio/type1: Report iommu nesting info to userspace
Date: Thu, 13 Aug 2020 15:19:55 +0200	[thread overview]
Message-ID: <2243bef1-52b7-9142-54be-8763046aa9f8@redhat.com> (raw)
In-Reply-To: <1595917664-33276-5-git-send-email-yi.l.liu@intel.com>

Hi Yi,
On 7/28/20 8:27 AM, Liu Yi L wrote:
> This patch exports iommu nesting capability info to user space through
> VFIO. Userspace is expected to check this info for supported uAPIs (e.g.
> PASID alloc/free, bind page table, and cache invalidation) and the vendor
> specific format information for first level/stage page table that will be
> bound to.
> 
> The nesting info is available only after container set to be NESTED type.
> Current implementation imposes one limitation - one nesting container
> should include at most one iommu group. The philosophy of vfio container
> is having all groups/devices within the container share the same IOMMU
> context. When vSVA is enabled, one IOMMU context could include one 2nd-
> level address space and multiple 1st-level address spaces. While the
> 2nd-level address space is reasonably sharable by multiple groups, blindly
> sharing 1st-level address spaces across all groups within the container
> might instead break the guest expectation. In the future sub/super container
> concept might be introduced to allow partial address space sharing within
> an IOMMU context. But for now let's go with this restriction by requiring
> singleton container for using nesting iommu features. Below link has the
> related discussion about this decision.
> 
> https://lore.kernel.org/kvm/20200515115924.37e6996d@w520.home/
> 
> This patch also changes the NESTING type container behaviour. Something
> that would have succeeded before will now fail: Before this series, if
> user asked for a VFIO_IOMMU_TYPE1_NESTING, it would have succeeded even
> if the SMMU didn't support stage-2, as the driver would have silently
> fallen back on stage-1 mappings (which work exactly the same as stage-2
> only since there was no nesting supported). After the series, we do check
> for DOMAIN_ATTR_NESTING so if user asks for VFIO_IOMMU_TYPE1_NESTING and
> the SMMU doesn't support stage-2, the ioctl fails. But it should be a good
> fix and completely harmless. Detail can be found in below link as well.
> 
> https://lore.kernel.org/kvm/20200717090900.GC4850@myrica/
> 
> Cc: Kevin Tian <kevin.tian@intel.com>
> CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> ---
> v5 -> v6:
> *) address comments against v5 from Eric Auger.
> *) don't report nesting cap to userspace if the nesting_info->format is
>    invalid.
> 
> v4 -> v5:
> *) address comments from Eric Auger.
> *) return struct iommu_nesting_info for VFIO_IOMMU_TYPE1_INFO_CAP_NESTING as
>    cap is much "cheap", if needs extension in future, just define another cap.
>    https://lore.kernel.org/kvm/20200708132947.5b7ee954@x1.home/
> 
> v3 -> v4:
> *) address comments against v3.
> 
> v1 -> v2:
> *) added in v2
> ---
>  drivers/vfio/vfio_iommu_type1.c | 106 +++++++++++++++++++++++++++++++++++-----
>  include/uapi/linux/vfio.h       |  19 +++++++
>  2 files changed, 113 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
> index 3bd70ff..18ff0c3 100644
> --- a/drivers/vfio/vfio_iommu_type1.c
> +++ b/drivers/vfio/vfio_iommu_type1.c
> @@ -62,18 +62,20 @@ MODULE_PARM_DESC(dma_entry_limit,
>  		 "Maximum number of user DMA mappings per container (65535).");
>  
>  struct vfio_iommu {
> -	struct list_head	domain_list;
> -	struct list_head	iova_list;
> -	struct vfio_domain	*external_domain; /* domain for external user */
> -	struct mutex		lock;
> -	struct rb_root		dma_list;
> -	struct blocking_notifier_head notifier;
> -	unsigned int		dma_avail;
> -	uint64_t		pgsize_bitmap;
> -	bool			v2;
> -	bool			nesting;
> -	bool			dirty_page_tracking;
> -	bool			pinned_page_dirty_scope;
> +	struct list_head		domain_list;
> +	struct list_head		iova_list;
> +	/* domain for external user */
> +	struct vfio_domain		*external_domain;
> +	struct mutex			lock;
> +	struct rb_root			dma_list;
> +	struct blocking_notifier_head	notifier;
> +	unsigned int			dma_avail;
> +	uint64_t			pgsize_bitmap;
> +	bool				v2;
> +	bool				nesting;
> +	bool				dirty_page_tracking;
> +	bool				pinned_page_dirty_scope;
> +	struct iommu_nesting_info	*nesting_info;
>  };
>  
>  struct vfio_domain {
> @@ -130,6 +132,9 @@ struct vfio_regions {
>  #define IS_IOMMU_CAP_DOMAIN_IN_CONTAINER(iommu)	\
>  					(!list_empty(&iommu->domain_list))
>  
> +#define CONTAINER_HAS_DOMAIN(iommu)	(((iommu)->external_domain) || \
> +					 (!list_empty(&(iommu)->domain_list)))
> +
>  #define DIRTY_BITMAP_BYTES(n)	(ALIGN(n, BITS_PER_TYPE(u64)) / BITS_PER_BYTE)
>  
>  /*
> @@ -1929,6 +1934,13 @@ static void vfio_iommu_iova_insert_copy(struct vfio_iommu *iommu,
>  
>  	list_splice_tail(iova_copy, iova);
>  }
> +
> +static void vfio_iommu_release_nesting_info(struct vfio_iommu *iommu)
> +{
> +	kfree(iommu->nesting_info);
> +	iommu->nesting_info = NULL;
> +}
> +
>  static int vfio_iommu_type1_attach_group(void *iommu_data,
>  					 struct iommu_group *iommu_group)
>  {
> @@ -1959,6 +1971,12 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  		}
>  	}
>  
> +	/* Nesting type container can include only one group */
> +	if (iommu->nesting && CONTAINER_HAS_DOMAIN(iommu)) {
> +		mutex_unlock(&iommu->lock);
> +		return -EINVAL;
> +	}
> +
>  	group = kzalloc(sizeof(*group), GFP_KERNEL);
>  	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
>  	if (!group || !domain) {
> @@ -2029,6 +2047,32 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  	if (ret)
>  		goto out_domain;
>  
> +	/* Nesting cap info is available only after attaching */
> +	if (iommu->nesting) {
> +		struct iommu_nesting_info tmp = { .argsz = 0, };
> +
> +		/* First get the size of vendor specific nesting info */
> +		ret = iommu_domain_get_attr(domain->domain,
> +					    DOMAIN_ATTR_NESTING,
> +					    &tmp);
> +		if (ret)
> +			goto out_detach;
> +
> +		iommu->nesting_info = kzalloc(tmp.argsz, GFP_KERNEL);
> +		if (!iommu->nesting_info) {
> +			ret = -ENOMEM;
> +			goto out_detach;
> +		}
> +
> +		/* Now get the nesting info */
> +		iommu->nesting_info->argsz = tmp.argsz;
> +		ret = iommu_domain_get_attr(domain->domain,
> +					    DOMAIN_ATTR_NESTING,
> +					    iommu->nesting_info);
> +		if (ret)
> +			goto out_detach;
> +	}
> +
>  	/* Get aperture info */
>  	iommu_domain_get_attr(domain->domain, DOMAIN_ATTR_GEOMETRY, &geo);
>  
> @@ -2138,6 +2182,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  	return 0;
>  
>  out_detach:
> +	vfio_iommu_release_nesting_info(iommu);
>  	vfio_iommu_detach_group(domain, group);
>  out_domain:
>  	iommu_domain_free(domain->domain);
> @@ -2338,6 +2383,8 @@ static void vfio_iommu_type1_detach_group(void *iommu_data,
>  					vfio_iommu_unmap_unpin_all(iommu);
>  				else
>  					vfio_iommu_unmap_unpin_reaccount(iommu);
> +
> +				vfio_iommu_release_nesting_info(iommu);
>  			}
>  			iommu_domain_free(domain->domain);
>  			list_del(&domain->next);
> @@ -2546,6 +2593,39 @@ static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
>  	return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
>  }
>  
> +static int vfio_iommu_add_nesting_cap(struct vfio_iommu *iommu,
> +				      struct vfio_info_cap *caps)
> +{
> +	struct vfio_info_cap_header *header;
> +	struct vfio_iommu_type1_info_cap_nesting *nesting_cap;
> +	size_t size;
> +
> +	/* when nesting_info is null, no need go further */
no need to go
> +	if (!iommu->nesting_info)
> +		return 0;
> +
> +	/* when @format of nesting_info is 0, fail the call */
> +	if (iommu->nesting_info->format == 0)
> +		return -ENOENT;
> +
> +	size = offsetof(struct vfio_iommu_type1_info_cap_nesting, info) +
> +	       iommu->nesting_info->argsz;
> +
> +	header = vfio_info_cap_add(caps, size,
> +				   VFIO_IOMMU_TYPE1_INFO_CAP_NESTING, 1);
> +	if (IS_ERR(header))
> +		return PTR_ERR(header);
> +
> +	nesting_cap = container_of(header,
> +				   struct vfio_iommu_type1_info_cap_nesting,
> +				   header);
> +
> +	memcpy(&nesting_cap->info, iommu->nesting_info,
> +	       iommu->nesting_info->argsz);
can't you use vfio_info_add_capability() directly?
> +
> +	return 0;
> +}
> +
>  static int vfio_iommu_type1_get_info(struct vfio_iommu *iommu,
>  				     unsigned long arg)
>  {
> @@ -2581,6 +2661,8 @@ static int vfio_iommu_type1_get_info(struct vfio_iommu *iommu,
>  	if (!ret)
>  		ret = vfio_iommu_iova_build_caps(iommu, &caps);
>  
> +	ret = vfio_iommu_add_nesting_cap(iommu, &caps);
> +
>  	mutex_unlock(&iommu->lock);
>  
>  	if (ret)
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 9204705..0cf3d6d 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -14,6 +14,7 @@
>  
>  #include <linux/types.h>
>  #include <linux/ioctl.h>
> +#include <linux/iommu.h>
>  
>  #define VFIO_API_VERSION	0
>  
> @@ -1039,6 +1040,24 @@ struct vfio_iommu_type1_info_cap_migration {
>  	__u64	max_dirty_bitmap_size;		/* in bytes */
>  };
>  
> +/*
> + * The nesting capability allows to report the related capability
> + * and info for nesting iommu type.
> + *
> + * The structures below define version 1 of this capability.
> + *
> + * Userspace selected VFIO_TYPE1_NESTING_IOMMU type should check
> + * this capability to get supported features.
nested capabilities should be checked by the userspace after setting
VFIO_TYPE1_NESTING_IOMMU?
> + *
> + * @info: the nesting info provided by IOMMU driver.
> + */
> +#define VFIO_IOMMU_TYPE1_INFO_CAP_NESTING  3
> +
> +struct vfio_iommu_type1_info_cap_nesting {
> +	struct	vfio_info_cap_header header;
> +	struct iommu_nesting_info info;
> +};
> +
>  #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
>  
>  /**
> 
Thanks

Eric


WARNING: multiple messages have this Message-ID (diff)
From: Auger Eric <eric.auger@redhat.com>
To: Liu Yi L <yi.l.liu@intel.com>,
	alex.williamson@redhat.com, baolu.lu@linux.intel.com,
	joro@8bytes.org
Cc: jean-philippe@linaro.org, kevin.tian@intel.com,
	ashok.raj@intel.com, kvm@vger.kernel.org, stefanha@gmail.com,
	jun.j.tian@intel.com, iommu@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org, yi.y.sun@intel.com,
	hao.wu@intel.com
Subject: Re: [PATCH v6 04/15] vfio/type1: Report iommu nesting info to userspace
Date: Thu, 13 Aug 2020 15:19:55 +0200	[thread overview]
Message-ID: <2243bef1-52b7-9142-54be-8763046aa9f8@redhat.com> (raw)
In-Reply-To: <1595917664-33276-5-git-send-email-yi.l.liu@intel.com>

Hi Yi,
On 7/28/20 8:27 AM, Liu Yi L wrote:
> This patch exports iommu nesting capability info to user space through
> VFIO. Userspace is expected to check this info for supported uAPIs (e.g.
> PASID alloc/free, bind page table, and cache invalidation) and the vendor
> specific format information for first level/stage page table that will be
> bound to.
> 
> The nesting info is available only after container set to be NESTED type.
> Current implementation imposes one limitation - one nesting container
> should include at most one iommu group. The philosophy of vfio container
> is having all groups/devices within the container share the same IOMMU
> context. When vSVA is enabled, one IOMMU context could include one 2nd-
> level address space and multiple 1st-level address spaces. While the
> 2nd-level address space is reasonably sharable by multiple groups, blindly
> sharing 1st-level address spaces across all groups within the container
> might instead break the guest expectation. In the future sub/super container
> concept might be introduced to allow partial address space sharing within
> an IOMMU context. But for now let's go with this restriction by requiring
> singleton container for using nesting iommu features. Below link has the
> related discussion about this decision.
> 
> https://lore.kernel.org/kvm/20200515115924.37e6996d@w520.home/
> 
> This patch also changes the NESTING type container behaviour. Something
> that would have succeeded before will now fail: Before this series, if
> user asked for a VFIO_IOMMU_TYPE1_NESTING, it would have succeeded even
> if the SMMU didn't support stage-2, as the driver would have silently
> fallen back on stage-1 mappings (which work exactly the same as stage-2
> only since there was no nesting supported). After the series, we do check
> for DOMAIN_ATTR_NESTING so if user asks for VFIO_IOMMU_TYPE1_NESTING and
> the SMMU doesn't support stage-2, the ioctl fails. But it should be a good
> fix and completely harmless. Detail can be found in below link as well.
> 
> https://lore.kernel.org/kvm/20200717090900.GC4850@myrica/
> 
> Cc: Kevin Tian <kevin.tian@intel.com>
> CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> ---
> v5 -> v6:
> *) address comments against v5 from Eric Auger.
> *) don't report nesting cap to userspace if the nesting_info->format is
>    invalid.
> 
> v4 -> v5:
> *) address comments from Eric Auger.
> *) return struct iommu_nesting_info for VFIO_IOMMU_TYPE1_INFO_CAP_NESTING as
>    cap is much "cheap", if needs extension in future, just define another cap.
>    https://lore.kernel.org/kvm/20200708132947.5b7ee954@x1.home/
> 
> v3 -> v4:
> *) address comments against v3.
> 
> v1 -> v2:
> *) added in v2
> ---
>  drivers/vfio/vfio_iommu_type1.c | 106 +++++++++++++++++++++++++++++++++++-----
>  include/uapi/linux/vfio.h       |  19 +++++++
>  2 files changed, 113 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
> index 3bd70ff..18ff0c3 100644
> --- a/drivers/vfio/vfio_iommu_type1.c
> +++ b/drivers/vfio/vfio_iommu_type1.c
> @@ -62,18 +62,20 @@ MODULE_PARM_DESC(dma_entry_limit,
>  		 "Maximum number of user DMA mappings per container (65535).");
>  
>  struct vfio_iommu {
> -	struct list_head	domain_list;
> -	struct list_head	iova_list;
> -	struct vfio_domain	*external_domain; /* domain for external user */
> -	struct mutex		lock;
> -	struct rb_root		dma_list;
> -	struct blocking_notifier_head notifier;
> -	unsigned int		dma_avail;
> -	uint64_t		pgsize_bitmap;
> -	bool			v2;
> -	bool			nesting;
> -	bool			dirty_page_tracking;
> -	bool			pinned_page_dirty_scope;
> +	struct list_head		domain_list;
> +	struct list_head		iova_list;
> +	/* domain for external user */
> +	struct vfio_domain		*external_domain;
> +	struct mutex			lock;
> +	struct rb_root			dma_list;
> +	struct blocking_notifier_head	notifier;
> +	unsigned int			dma_avail;
> +	uint64_t			pgsize_bitmap;
> +	bool				v2;
> +	bool				nesting;
> +	bool				dirty_page_tracking;
> +	bool				pinned_page_dirty_scope;
> +	struct iommu_nesting_info	*nesting_info;
>  };
>  
>  struct vfio_domain {
> @@ -130,6 +132,9 @@ struct vfio_regions {
>  #define IS_IOMMU_CAP_DOMAIN_IN_CONTAINER(iommu)	\
>  					(!list_empty(&iommu->domain_list))
>  
> +#define CONTAINER_HAS_DOMAIN(iommu)	(((iommu)->external_domain) || \
> +					 (!list_empty(&(iommu)->domain_list)))
> +
>  #define DIRTY_BITMAP_BYTES(n)	(ALIGN(n, BITS_PER_TYPE(u64)) / BITS_PER_BYTE)
>  
>  /*
> @@ -1929,6 +1934,13 @@ static void vfio_iommu_iova_insert_copy(struct vfio_iommu *iommu,
>  
>  	list_splice_tail(iova_copy, iova);
>  }
> +
> +static void vfio_iommu_release_nesting_info(struct vfio_iommu *iommu)
> +{
> +	kfree(iommu->nesting_info);
> +	iommu->nesting_info = NULL;
> +}
> +
>  static int vfio_iommu_type1_attach_group(void *iommu_data,
>  					 struct iommu_group *iommu_group)
>  {
> @@ -1959,6 +1971,12 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  		}
>  	}
>  
> +	/* Nesting type container can include only one group */
> +	if (iommu->nesting && CONTAINER_HAS_DOMAIN(iommu)) {
> +		mutex_unlock(&iommu->lock);
> +		return -EINVAL;
> +	}
> +
>  	group = kzalloc(sizeof(*group), GFP_KERNEL);
>  	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
>  	if (!group || !domain) {
> @@ -2029,6 +2047,32 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  	if (ret)
>  		goto out_domain;
>  
> +	/* Nesting cap info is available only after attaching */
> +	if (iommu->nesting) {
> +		struct iommu_nesting_info tmp = { .argsz = 0, };
> +
> +		/* First get the size of vendor specific nesting info */
> +		ret = iommu_domain_get_attr(domain->domain,
> +					    DOMAIN_ATTR_NESTING,
> +					    &tmp);
> +		if (ret)
> +			goto out_detach;
> +
> +		iommu->nesting_info = kzalloc(tmp.argsz, GFP_KERNEL);
> +		if (!iommu->nesting_info) {
> +			ret = -ENOMEM;
> +			goto out_detach;
> +		}
> +
> +		/* Now get the nesting info */
> +		iommu->nesting_info->argsz = tmp.argsz;
> +		ret = iommu_domain_get_attr(domain->domain,
> +					    DOMAIN_ATTR_NESTING,
> +					    iommu->nesting_info);
> +		if (ret)
> +			goto out_detach;
> +	}
> +
>  	/* Get aperture info */
>  	iommu_domain_get_attr(domain->domain, DOMAIN_ATTR_GEOMETRY, &geo);
>  
> @@ -2138,6 +2182,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>  	return 0;
>  
>  out_detach:
> +	vfio_iommu_release_nesting_info(iommu);
>  	vfio_iommu_detach_group(domain, group);
>  out_domain:
>  	iommu_domain_free(domain->domain);
> @@ -2338,6 +2383,8 @@ static void vfio_iommu_type1_detach_group(void *iommu_data,
>  					vfio_iommu_unmap_unpin_all(iommu);
>  				else
>  					vfio_iommu_unmap_unpin_reaccount(iommu);
> +
> +				vfio_iommu_release_nesting_info(iommu);
>  			}
>  			iommu_domain_free(domain->domain);
>  			list_del(&domain->next);
> @@ -2546,6 +2593,39 @@ static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
>  	return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
>  }
>  
> +static int vfio_iommu_add_nesting_cap(struct vfio_iommu *iommu,
> +				      struct vfio_info_cap *caps)
> +{
> +	struct vfio_info_cap_header *header;
> +	struct vfio_iommu_type1_info_cap_nesting *nesting_cap;
> +	size_t size;
> +
> +	/* when nesting_info is null, no need go further */
no need to go
> +	if (!iommu->nesting_info)
> +		return 0;
> +
> +	/* when @format of nesting_info is 0, fail the call */
> +	if (iommu->nesting_info->format == 0)
> +		return -ENOENT;
> +
> +	size = offsetof(struct vfio_iommu_type1_info_cap_nesting, info) +
> +	       iommu->nesting_info->argsz;
> +
> +	header = vfio_info_cap_add(caps, size,
> +				   VFIO_IOMMU_TYPE1_INFO_CAP_NESTING, 1);
> +	if (IS_ERR(header))
> +		return PTR_ERR(header);
> +
> +	nesting_cap = container_of(header,
> +				   struct vfio_iommu_type1_info_cap_nesting,
> +				   header);
> +
> +	memcpy(&nesting_cap->info, iommu->nesting_info,
> +	       iommu->nesting_info->argsz);
can't you use vfio_info_add_capability() directly?
> +
> +	return 0;
> +}
> +
>  static int vfio_iommu_type1_get_info(struct vfio_iommu *iommu,
>  				     unsigned long arg)
>  {
> @@ -2581,6 +2661,8 @@ static int vfio_iommu_type1_get_info(struct vfio_iommu *iommu,
>  	if (!ret)
>  		ret = vfio_iommu_iova_build_caps(iommu, &caps);
>  
> +	ret = vfio_iommu_add_nesting_cap(iommu, &caps);
> +
>  	mutex_unlock(&iommu->lock);
>  
>  	if (ret)
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 9204705..0cf3d6d 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -14,6 +14,7 @@
>  
>  #include <linux/types.h>
>  #include <linux/ioctl.h>
> +#include <linux/iommu.h>
>  
>  #define VFIO_API_VERSION	0
>  
> @@ -1039,6 +1040,24 @@ struct vfio_iommu_type1_info_cap_migration {
>  	__u64	max_dirty_bitmap_size;		/* in bytes */
>  };
>  
> +/*
> + * The nesting capability allows to report the related capability
> + * and info for nesting iommu type.
> + *
> + * The structures below define version 1 of this capability.
> + *
> + * Userspace selected VFIO_TYPE1_NESTING_IOMMU type should check
> + * this capability to get supported features.
nested capabilities should be checked by the userspace after setting
VFIO_TYPE1_NESTING_IOMMU?
> + *
> + * @info: the nesting info provided by IOMMU driver.
> + */
> +#define VFIO_IOMMU_TYPE1_INFO_CAP_NESTING  3
> +
> +struct vfio_iommu_type1_info_cap_nesting {
> +	struct	vfio_info_cap_header header;
> +	struct iommu_nesting_info info;
> +};
> +
>  #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
>  
>  /**
> 
Thanks

Eric

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-08-13 13:20 UTC|newest]

Thread overview: 114+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28  6:27 [PATCH v6 00/15] vfio: expose virtual Shared Virtual Addressing to VMs Liu Yi L
2020-07-28  6:27 ` Liu Yi L
2020-07-28  6:27 ` [PATCH v6 01/15] vfio/type1: Refactor vfio_iommu_type1_ioctl() Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-07-28 15:53   ` Alex Williamson
2020-07-28 15:53     ` Alex Williamson
2020-07-29  2:20     ` Liu, Yi L
2020-07-29  2:20       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 02/15] iommu: Report domain nesting info Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-13 12:52   ` Auger Eric
2020-08-13 12:52     ` Auger Eric
2020-08-14  7:15     ` Liu, Yi L
2020-08-14  7:15       ` Liu, Yi L
2020-08-16 12:40       ` Auger Eric
2020-08-16 12:40         ` Auger Eric
2020-08-18  4:21         ` Jacob Pan
2020-08-18  4:21           ` Jacob Pan
2020-08-18  6:59           ` Auger Eric
2020-08-18  6:59             ` Auger Eric
2020-07-28  6:27 ` [PATCH v6 03/15] iommu/smmu: Report empty " Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-07-28  6:27 ` [PATCH v6 04/15] vfio/type1: Report iommu nesting info to userspace Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-13 13:19   ` Auger Eric [this message]
2020-08-13 13:19     ` Auger Eric
2020-08-14  7:36     ` Liu, Yi L
2020-08-14  7:36       ` Liu, Yi L
2020-08-20 19:52   ` Alex Williamson
2020-08-20 19:52     ` Alex Williamson
2020-08-21  0:52     ` Liu, Yi L
2020-08-21  0:52       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 05/15] vfio: Add PASID allocation/free support Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-13 15:07   ` Auger Eric
2020-08-13 15:07     ` Auger Eric
2020-08-14  7:40     ` Liu, Yi L
2020-08-14  7:40       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 06/15] iommu/vt-d: Support setting ioasid set to domain Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-13 15:06   ` Auger Eric
2020-08-13 15:06     ` Auger Eric
2020-08-14  8:04     ` Liu, Yi L
2020-08-14  8:04       ` Liu, Yi L
2020-08-16 12:42       ` Auger Eric
2020-08-16 12:42         ` Auger Eric
2020-07-28  6:27 ` [PATCH v6 07/15] vfio/type1: Add VFIO_IOMMU_PASID_REQUEST (alloc/free) Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-15 16:30   ` Auger Eric
2020-08-15 16:30     ` Auger Eric
2020-08-17  5:23     ` Liu, Yi L
2020-08-17  5:23       ` Liu, Yi L
2020-08-20 20:51   ` Alex Williamson
2020-08-20 20:51     ` Alex Williamson
2020-08-21  0:37     ` Liu, Yi L
2020-08-21  0:37       ` Liu, Yi L
2020-08-21  1:49       ` Alex Williamson
2020-08-21  1:49         ` Alex Williamson
2020-08-21  2:18         ` Liu, Yi L
2020-08-21  2:18           ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 08/15] iommu: Pass domain to sva_unbind_gpasid() Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-20 21:06   ` Alex Williamson
2020-08-20 21:06     ` Alex Williamson
2020-08-21  0:18     ` Liu, Yi L
2020-08-21  0:18       ` Liu, Yi L
2020-08-21 13:09     ` Auger Eric
2020-08-21 13:09       ` Auger Eric
2020-07-28  6:27 ` [PATCH v6 09/15] iommu/vt-d: Check ownership for PASIDs from user-space Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-15 16:30   ` Auger Eric
2020-08-15 16:30     ` Auger Eric
2020-08-17  5:38     ` Liu, Yi L
2020-08-17  5:38       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 10/15] vfio/type1: Support binding guest page tables to PASID Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-16 11:29   ` Auger Eric
2020-08-16 11:29     ` Auger Eric
2020-08-17  6:30     ` Liu, Yi L
2020-08-17  6:30       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 11/15] vfio/type1: Allow invalidating first-level/stage IOMMU cache Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-16 11:35   ` Auger Eric
2020-08-16 11:35     ` Auger Eric
2020-08-17  6:30     ` Liu, Yi L
2020-08-17  6:30       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 12/15] vfio/type1: Add vSVA support for IOMMU-backed mdevs Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-20 21:48   ` Alex Williamson
2020-08-20 21:48     ` Alex Williamson
2020-08-21  0:53     ` Liu, Yi L
2020-08-21  0:53       ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 13/15] vfio/pci: Expose PCIe PASID capability to guest Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-07-28  6:27 ` [PATCH v6 14/15] vfio: Document dual stage control Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-16 11:51   ` Auger Eric
2020-08-16 11:51     ` Auger Eric
2020-08-17  7:00     ` Liu, Yi L
2020-08-17  7:00       ` Liu, Yi L
2020-08-17  7:40       ` Eric Auger
2020-08-17  7:40         ` Eric Auger
2020-08-17  7:43         ` Liu, Yi L
2020-08-17  7:43           ` Liu, Yi L
2020-07-28  6:27 ` [PATCH v6 15/15] iommu/vt-d: Support reporting nesting capability info Liu Yi L
2020-07-28  6:27   ` Liu Yi L
2020-08-16 12:01   ` Auger Eric
2020-08-16 12:01     ` Auger Eric
2020-08-17  7:05     ` Liu, Yi L
2020-08-17  7:05       ` Liu, Yi L
2020-08-17  7:42       ` Auger Eric
2020-08-17  7:42         ` Auger Eric
2020-08-17  7:45         ` Liu, Yi L
2020-08-17  7:45           ` Liu, Yi L

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2243bef1-52b7-9142-54be-8763046aa9f8@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=hao.wu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe@linaro.org \
    --cc=joro@8bytes.org \
    --cc=jun.j.tian@intel.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterx@redhat.com \
    --cc=stefanha@gmail.com \
    --cc=yi.l.liu@intel.com \
    --cc=yi.y.sun@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.