[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200401

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200401

[Patrick DELAUNAY]

Hi Tom,

Please pull the latest STM32 master bugfix for v2020.04 = u-boot-stm32-20200401

With the following changes:
- Fix device tree of Avenger96 board from Arrow Electronics and add
  compatibility with stm32mp15_dhcom_basic_defconfig

CI status: Failed for vexpress_ca9x4 test.py
     https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2592

But local compilation is OK with buildman on stm32 targets.
I think it is enough as the Marek's patches only update the dh board code and the AV96 device tree.

Thanks,
Patrick

The following changes since commit af827140e5965e5bb2bcad1c53ca8419b428ff6d:

  vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader. (2020-03-23 16:11:46 -0400)

are available in the Git repository at:

  https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200401

for you to fetch changes up to 2f3c4b8a0f303edbea9fc112a49e546cf03776b0:

  ARM: dts: stm32: Repair PMIC configuration on AV96 (2020-04-01 11:58:00 +0200)

----------------------------------------------------------------
- Fix device tree of Avenger96 board from Arrow Electronics and add
  compatibility with stm32mp15_dhcom_basic_defconfig

----------------------------------------------------------------
Marek Vasut (12):
      ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96
      ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins
      ARM: dts: stm32: Repair SDMMC1 operation on AV96
      ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7
      ARM: dts: stm32: Repair SDMMC2 operation
      ARM: dts: stm32: Add QSPI NOR on AV96
      ARM: dts: stm32: Use DT alias for the configuration EEPROM
      ARM: dts: stm32: Add configuration EEPROM on AV96
      ARM: dts: stm32: Add alternate pinmux for ethernet RGMII
      ARM: dts: stm32: Repair ethernet operation on AV96
      ARM: dts: stm32: Add missing ethernet PHY reset on AV96
      ARM: dts: stm32: Repair PMIC configuration on AV96

 arch/arm/dts/stm32mp157-pinctrl.dtsi           | 96 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi |  9 ++--
 arch/arm/dts/stm32mp157a-avenger96.dts         | 79 ++++++++++++++++++++++++++++-----
 arch/arm/dts/stm32mp15xx-dhcom.dtsi            |  6 ++-
 board/dhelectronics/dh_stm32mp1/board.c        | 15 +++----
 5 files changed, 182 insertions(+), 23 deletions(-)

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200401

[Marek Vasut]

On 4/1/20 2:43 PM, Patrick DELAUNAY wrote:
> Hi Tom,

Hi,

> Please pull the latest STM32 master bugfix for v2020.04 = u-boot-stm32-20200401
> 
> With the following changes:
> - Fix device tree of Avenger96 board from Arrow Electronics and add
>   compatibility with stm32mp15_dhcom_basic_defconfig
> 
> CI status: Failed for vexpress_ca9x4 test.py
>      https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2592
> 
> But local compilation is OK with buildman on stm32 targets.
> I think it is enough as the Marek's patches only update the dh board code and the AV96 device tree.

Works well on my AV96, thanks.

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200401

[Tom Rini]

On Wed, Apr 01, 2020 at 12:43:44PM +0000, Patrick DELAUNAY wrote:
> Hi Tom,
> 
> Please pull the latest STM32 master bugfix for v2020.04 = u-boot-stm32-20200401
> 
> With the following changes:
> - Fix device tree of Avenger96 board from Arrow Electronics and add
>   compatibility with stm32mp15_dhcom_basic_defconfig
> 
> CI status: Failed for vexpress_ca9x4 test.py
>      https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2592

So, this failed because we tried, again, to run a test that we're
supposed to be skipping.  I both want to know _why_ this keeps happening
but also think we really need to update the vexpress config such that
EFI tests are not skipped and we have the device tree available (via
fdt_addr or fdtcontroladdr environment variable).  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200401/eec93165/attachment.sig>

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200401

[Heinrich Schuchardt]

On 4/1/20 3:47 PM, Tom Rini wrote:
> On Wed, Apr 01, 2020 at 12:43:44PM +0000, Patrick DELAUNAY wrote:
>> Hi Tom,
>>
>> Please pull the latest STM32 master bugfix for v2020.04 = u-boot-stm32-20200401
>>
>> With the following changes:
>> - Fix device tree of Avenger96 board from Arrow Electronics and add
>>   compatibility with stm32mp15_dhcom_basic_defconfig
>>
>> CI status: Failed for vexpress_ca9x4 test.py
>>      https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2592
>
> So, this failed because we tried, again, to run a test that we're
> supposed to be skipping.  I both want to know _why_ this keeps happening
> but also think we really need to update the vexpress config such that
> EFI tests are not skipped and we have the device tree available (via
> fdt_addr or fdtcontroladdr environment variable).  Thanks!
>
Hello Tom,

this repository contains Kristian Amlie's problematic vexpress_ca9x4
patch but has not been rebased upon current origin/master. This is why
the patch for skipping the test is missing.

We get all those warnings below. On the other hand I think the only
virtue of all the vexpress configurations is testing that our legacy
non-DM code is running.

===================== WARNING ======================
This board does not use CONFIG_DM. CONFIG_DM will be
compulsory starting with the v2020.01 release.
Failure to update may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Best regards

Heinrich

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200401

[Tom Rini]

On Wed, Apr 01, 2020 at 12:43:44PM +0000, Patrick DELAUNAY wrote:

> Hi Tom,
> 
> Please pull the latest STM32 master bugfix for v2020.04 = u-boot-stm32-20200401
> 
> With the following changes:
> - Fix device tree of Avenger96 board from Arrow Electronics and add
>   compatibility with stm32mp15_dhcom_basic_defconfig
> 
> CI status: Failed for vexpress_ca9x4 test.py
>      https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2592
> 
> But local compilation is OK with buildman on stm32 targets.
> I think it is enough as the Marek's patches only update the dh board code and the AV96 device tree.
> 
> Thanks,
> Patrick
> 
> The following changes since commit af827140e5965e5bb2bcad1c53ca8419b428ff6d:
> 
>   vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader. (2020-03-23 16:11:46 -0400)
> 
> are available in the Git repository at:
> 
>   https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200401
> 
> for you to fetch changes up to 2f3c4b8a0f303edbea9fc112a49e546cf03776b0:
> 
>   ARM: dts: stm32: Repair PMIC configuration on AV96 (2020-04-01 11:58:00 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200401/6e3b790d/attachment.sig>

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200424

[Patrick DELAUNAY]

Hi Tom,

Please pull the STM32 related fixes for v2020.07 = u-boot-stm32-20200424

With the following changes:
- Solve stm32mp15 pinctrl dts issue (patch conlict in branches master and next)
- Split device tree for DHCOR Som and AV 96 board
- Update PLL4 setting in AV96 board
- Enable bootd, iminfo, imxtract on DHCOM

CI status: 
    https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2909

Thanks,
Patrick

The following changes since commit dbfd9e0e61ff1f9c65703959ed8e3ceb410d1e7e:

  dm: pinctrl: Use right device pointer for configuring pinctrl (2020-04-23 08:25:37 -0400)

are available in the Git repository at:

  https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200424

for you to fetch changes up to 23d203d62e0ec95bc42bf96c56df991ff924f360:

  ARM: stm32: Enable bootd, iminfo, imxtract on DHCOM (2020-04-24 17:59:48 +0200)

----------------------------------------------------------------
- Solve stm32mp15 pinctrl dts issue (patch conflict in branches master and next)
- Split device tree for DHCOR Som and AV 96 board
- Update PLL4 setting in AV96 board
- Enable bootd, iminfo, imxtract on DHCOM

----------------------------------------------------------------
Marek Vasut (3):
      ARM: dts: stm32: Adjust PLL4 settings on AV96
      ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board
      ARM: stm32: Enable bootd, iminfo, imxtract on DHCOM

Patrick Delaunay (1):
      ARM: dts: stm32mp1: remove file stm32mp157-pinctrl.dtsi

 arch/arm/dts/Makefile                                                             |    3 +-
 arch/arm/dts/stm32mp15-pinctrl.dtsi                                               |   96 ++++++++
 arch/arm/dts/stm32mp157-pinctrl.dtsi                                              | 1153 -------------------------------------------------------------------------------------------
 arch/arm/dts/stm32mp157a-avenger96.dts                                            |  423 +---------------------------------
 arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi                              |   83 +++++++
 arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts                                      |  212 +++++++++++++++++
 arch/arm/dts/{stm32mp157a-avenger96-u-boot.dtsi => stm32mp15xx-dhcor-u-boot.dtsi} |   86 +------
 arch/arm/dts/stm32mp15xx-dhcor.dtsi                                               |  232 +++++++++++++++++++
 configs/stm32mp15_dhcom_basic_defconfig                                           |    3 -
 doc/board/st/stm32mp1.rst                                                         |    8 +-
 10 files changed, 638 insertions(+), 1661 deletions(-)
 delete mode 100644 arch/arm/dts/stm32mp157-pinctrl.dtsi
 create mode 100644 arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts
 rename arch/arm/dts/{stm32mp157a-avenger96-u-boot.dtsi => stm32mp15xx-dhcor-u-boot.dtsi} (71%)
 create mode 100644 arch/arm/dts/stm32mp15xx-dhcor.dtsi

[PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200424

[Tom Rini]

On Fri, Apr 24, 2020 at 05:42:06PM +0000, Patrick DELAUNAY wrote:

> Hi Tom,
> 
> Please pull the STM32 related fixes for v2020.07 = u-boot-stm32-20200424
> 
> With the following changes:
> - Solve stm32mp15 pinctrl dts issue (patch conlict in branches master and next)
> - Split device tree for DHCOR Som and AV 96 board
> - Update PLL4 setting in AV96 board
> - Enable bootd, iminfo, imxtract on DHCOM
> 
> CI status: 
>     https://gitlab.denx.de/u-boot/custodians/u-boot-stm/pipelines/2909
> 
> Thanks,
> Patrick
> 
> The following changes since commit dbfd9e0e61ff1f9c65703959ed8e3ceb410d1e7e:
> 
>   dm: pinctrl: Use right device pointer for configuring pinctrl (2020-04-23 08:25:37 -0400)
> 
> are available in the Git repository at:
> 
>   https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20200424
> 
> for you to fetch changes up to 23d203d62e0ec95bc42bf96c56df991ff924f360:
> 
>   ARM: stm32: Enable bootd, iminfo, imxtract on DHCOM (2020-04-24 17:59:48 +0200)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200425/466d8fe0/attachment.sig>