From: Markus Reichl <m.reichl@fivetechno.de> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Heiko Stuebner <heiko@sntech.de>, Jagan Teki <jagan@amarulasolutions.com>, Markus Reichl <m.reichl@fivetechno.de>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: dts: rockchip: Rework voltage supplies for regulators on rk3399-roc-pc Date: Thu, 31 Oct 2019 14:30:06 +0100 [thread overview] Message-ID: <22b56700-3c9e-0f60-cd74-7ff24d4f1a23@fivetechno.de> (raw) Correct the voltage supplies according to the board schematics ROC-3399-PC-V10-A-20180804. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> --- .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 30 ++++++++++--------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index e06e4163605b..def8bca7d158 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -142,7 +142,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; + vin-supply = <&dc_12v>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -190,7 +190,7 @@ regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc3v3_sys>; }; /* on roc-rk3399-mezzanine board */ @@ -283,18 +283,20 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; + vcc13-supply = <&vcc3v3_sys>; + vcc14-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; regulators { vdd_center: DCDC_REG1 { @@ -466,7 +468,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -485,7 +487,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Markus Reichl <m.reichl@fivetechno.de> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Heiko Stuebner <heiko@sntech.de>, Jagan Teki <jagan@amarulasolutions.com>, Markus Reichl <m.reichl@fivetechno.de>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: dts: rockchip: Rework voltage supplies for regulators on rk3399-roc-pc Date: Thu, 31 Oct 2019 14:30:06 +0100 [thread overview] Message-ID: <22b56700-3c9e-0f60-cd74-7ff24d4f1a23@fivetechno.de> (raw) Correct the voltage supplies according to the board schematics ROC-3399-PC-V10-A-20180804. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> --- .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 30 ++++++++++--------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index e06e4163605b..def8bca7d158 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -142,7 +142,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; + vin-supply = <&dc_12v>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -190,7 +190,7 @@ regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc3v3_sys>; }; /* on roc-rk3399-mezzanine board */ @@ -283,18 +283,20 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; + vcc13-supply = <&vcc3v3_sys>; + vcc14-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; regulators { vdd_center: DCDC_REG1 { @@ -466,7 +468,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -485,7 +487,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-10-31 13:30 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-31 13:30 Markus Reichl [this message] 2019-10-31 13:30 ` [PATCH] arm64: dts: rockchip: Rework voltage supplies for regulators on rk3399-roc-pc Markus Reichl 2019-10-31 14:24 ` Heiko Stuebner 2019-10-31 14:24 ` Heiko Stuebner 2019-10-31 15:56 ` Markus Reichl 2019-10-31 15:56 ` Markus Reichl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=22b56700-3c9e-0f60-cd74-7ff24d4f1a23@fivetechno.de \ --to=m.reichl@fivetechno.de \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=jagan@amarulasolutions.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.