From: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
To: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 0/8] ARM: tegra: support LP1 suspend mode
Date: Sat, 27 Jul 2013 18:12:10 +0200 [thread overview]
Message-ID: <2389689.JgQlW00RdN@ax5200p> (raw)
In-Reply-To: <1374830110-30685-1-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
On Friday 26 July 2013 17:15:02 Joseph Lo wrote:
> This series adds the support of LP1 suspend mode for Tegra.
>
> Verified on Seaboard, Cardhu and Dalmore.
tested on AC100 and worked fine, except
[ 68.448007] PM: Syncing filesystems ... done.
[ 71.370086] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 71.370088] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 71.371253] Suspending console(s) (use no_console_suspend to debug)
[ 71.638481] PM: suspend of devices complete after 266.604 msecs
[ 71.638905] PM: late suspend of devices complete after 0.417 msecs
[ 71.639477] PM: noirq suspend of devices complete after 0.568 msecs
[ 71.639480] Disabling non-boot CPUs ...
[ 71.640242] CPU1: shutdown
[ 71.641216] Entering suspend state LP1
[ 71.641267] Enabling non-boot CPUs ...
[ 71.643125] CPU1: Booted secondary processor
[ 71.643449] CPU1 is up
[ 71.643786] PM: noirq resume of devices complete after 0.331 msecs
[ 71.644300] PM: early resume of devices complete after 0.364 msecs
[ 71.648038] ------------[ cut here ]------------
[ 71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529
irq_set_irq_wake+0xb8/0xf0()
[ 71.648064] Unbalanced IRQ 384 wake disable
[ 71.648068] Modules linked in:
[ 71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2-
next-20130726-00008-gef01509-dirty #6
[ 71.648107] [<c001551c>] (unwind_backtrace+0x0/0xf8) from [<c001154c>]
(show_stack+0x10/0x14)
[ 71.648128] [<c001154c>] (show_stack+0x10/0x14) from [<c0515288>]
(dump_stack+0x80/0xc4)
[ 71.648142] [<c0515288>] (dump_stack+0x80/0xc4) from [<c0025340>]
(warn_slowpath_common+0x64/0x88)
[ 71.648151] [<c0025340>] (warn_slowpath_common+0x64/0x88) from [<c00253f8>]
(warn_slowpath_fmt+0x30/0x40)
[ 71.648161] [<c00253f8>] (warn_slowpath_fmt+0x30/0x40) from [<c007ff8c>]
(irq_set_irq_wake+0xb8/0xf0)
[ 71.648178] [<c007ff8c>] (irq_set_irq_wake+0xb8/0xf0) from [<c0334d00>]
(tps6586x_rtc_resume+0x30/0x38)
[ 71.648192] [<c0334d00>] (tps6586x_rtc_resume+0x30/0x38) from [<c02951d0>]
(platform_pm_resume+0x2c/0x4c)
[ 71.648202] [<c02951d0>] (platform_pm_resume+0x2c/0x4c) from [<c0299d40>]
(dpm_run_callback.isra.5+0x18/0x38)
[ 71.648211] [<c0299d40>] (dpm_run_callback.isra.5+0x18/0x38) from
[<c029a044>] (device_resume+0xb0/0x170)
[ 71.648219] [<c029a044>] (device_resume+0xb0/0x170) from [<c029aeb4>]
(dpm_resume+0xe8/0x20c)
[ 71.648227] [<c029aeb4>] (dpm_resume+0xe8/0x20c) from [<c029b174>]
(dpm_resume_end+0xc/0x18)
[ 71.648245] [<c029b174>] (dpm_resume_end+0xc/0x18) from [<c005e480>]
(suspend_devices_and_enter+0xdc/0x2f8)
[ 71.648256] [<c005e480>] (suspend_devices_and_enter+0xdc/0x2f8) from
[<c005e810>] (pm_suspend+0x174/0x1e8)
[ 71.648265] [<c005e810>] (pm_suspend+0x174/0x1e8) from [<c005d710>]
(state_store+0x6c/0xbc)
[ 71.648285] [<c005d710>] (state_store+0x6c/0xbc) from [<c01eca78>]
(kobj_attr_store+0x14/0x20)
[ 71.648298] [<c01eca78>] (kobj_attr_store+0x14/0x20) from [<c011e970>]
(sysfs_write_file+0x168/0x198)
[ 71.648312] [<c011e970>] (sysfs_write_file+0x168/0x198) from [<c00cd060>]
(vfs_write+0xb0/0x188)
[ 71.648321] [<c00cd060>] (vfs_write+0xb0/0x188) from [<c00cd410>]
(SyS_write+0x3c/0x70)
[ 71.648330] [<c00cd410>] (SyS_write+0x3c/0x70) from [<c000e560>]
(ret_fast_syscall+0x0/0x30)
[ 71.648334] ---[ end trace e5ed8212ac4db5da ]---
[ 72.063578] mmc1: power class selection to bus width 8 failed
[ 72.297753] usb 2-1: reset high-speed USB device number 2 using tegra-ehci
[ 72.567736] usb 3-1: reset high-speed USB device number 2 using tegra-ehci
[ 73.022058] usb 3-1.3: reset high-speed USB device number 4 using tegra-
ehci
[ 73.216064] usb 3-1.2: reset high-speed USB device number 3 using tegra-
ehci
[ 73.360225] PM: resume of devices complete after 1715.937 msecs
[ 73.361008] Restarting tasks ... done.
and sdcard being offline after resume (fixed by CONFIG_MMC_UNSAFE_RESUME=y).
Anyway, thanks for your great work!
Tested-By: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
> And tested with THUMB2_KERNEL as well.
>
> P.S.
> A known issue on Dalmore, the LP1 resume may take 10 ~ 15 seconds due to
> the 792MHz BCT. It can't be reproduced on Seaboard or Cardhu. And the
> root cause of this is about the default settings of EMC registers that
> cause the DRAM can't leave self-refresh mode immediately. If you want
> to test with quick LP1 resume on Dalmore, I can provide another HACK for
> this.
>
> Joseph Lo (8):
> ARM: tegra: add common resume handling code for LP1 resuming
> ARM: tegra: config the polarity of the request of sys clock
> clk: tegra114: add LP1 suspend/resume support
> ARM: tegra: add common LP1 suspend support
> ARM: tegra30: add LP1 suspend support
> ARM: tegra20: add LP1 suspend support
> ARM: tegra114: add LP1 suspend support
> ARM: dts: tegra: enable LP1 suspend mode
>
> arch/arm/boot/dts/tegra114-dalmore.dts | 2 +-
> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 2 +-
> arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
> arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
> arch/arm/boot/dts/tegra20-seaboard.dts | 2 +-
> arch/arm/boot/dts/tegra20-tamonten.dtsi | 2 +-
> arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
> arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
> arch/arm/boot/dts/tegra20-whistler.dts | 2 +-
> arch/arm/boot/dts/tegra30-beaver.dts | 2 +-
> arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +-
> arch/arm/mach-tegra/Makefile | 3 +
> arch/arm/mach-tegra/iomap.h | 6 +
> arch/arm/mach-tegra/pm-tegra20.c | 37 ++
> arch/arm/mach-tegra/pm-tegra30.c | 37 ++
> arch/arm/mach-tegra/pm.c | 121 +++++-
> arch/arm/mach-tegra/pm.h | 23 ++
> arch/arm/mach-tegra/pmc.c | 36 +-
> arch/arm/mach-tegra/pmc.h | 3 +
> arch/arm/mach-tegra/reset-handler.S | 13 +
> arch/arm/mach-tegra/reset.c | 2 +
> arch/arm/mach-tegra/reset.h | 4 +
> arch/arm/mach-tegra/sleep-tegra20.S | 300 ++++++++++++++
> arch/arm/mach-tegra/sleep-tegra30.S | 615
> +++++++++++++++++++++++++++++ arch/arm/mach-tegra/sleep.S |
> 8 +-
> arch/arm/mach-tegra/sleep.h | 18 +
> drivers/clk/tegra/clk-tegra114.c | 32 ++
> 27 files changed, 1259 insertions(+), 21 deletions(-)
> create mode 100644 arch/arm/mach-tegra/pm-tegra20.c
> create mode 100644 arch/arm/mach-tegra/pm-tegra30.c
WARNING: multiple messages have this Message-ID (diff)
From: marvin24@gmx.de (Marc Dietrich)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] ARM: tegra: support LP1 suspend mode
Date: Sat, 27 Jul 2013 18:12:10 +0200 [thread overview]
Message-ID: <2389689.JgQlW00RdN@ax5200p> (raw)
In-Reply-To: <1374830110-30685-1-git-send-email-josephl@nvidia.com>
On Friday 26 July 2013 17:15:02 Joseph Lo wrote:
> This series adds the support of LP1 suspend mode for Tegra.
>
> Verified on Seaboard, Cardhu and Dalmore.
tested on AC100 and worked fine, except
[ 68.448007] PM: Syncing filesystems ... done.
[ 71.370086] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 71.370088] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 71.371253] Suspending console(s) (use no_console_suspend to debug)
[ 71.638481] PM: suspend of devices complete after 266.604 msecs
[ 71.638905] PM: late suspend of devices complete after 0.417 msecs
[ 71.639477] PM: noirq suspend of devices complete after 0.568 msecs
[ 71.639480] Disabling non-boot CPUs ...
[ 71.640242] CPU1: shutdown
[ 71.641216] Entering suspend state LP1
[ 71.641267] Enabling non-boot CPUs ...
[ 71.643125] CPU1: Booted secondary processor
[ 71.643449] CPU1 is up
[ 71.643786] PM: noirq resume of devices complete after 0.331 msecs
[ 71.644300] PM: early resume of devices complete after 0.364 msecs
[ 71.648038] ------------[ cut here ]------------
[ 71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529
irq_set_irq_wake+0xb8/0xf0()
[ 71.648064] Unbalanced IRQ 384 wake disable
[ 71.648068] Modules linked in:
[ 71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2-
next-20130726-00008-gef01509-dirty #6
[ 71.648107] [<c001551c>] (unwind_backtrace+0x0/0xf8) from [<c001154c>]
(show_stack+0x10/0x14)
[ 71.648128] [<c001154c>] (show_stack+0x10/0x14) from [<c0515288>]
(dump_stack+0x80/0xc4)
[ 71.648142] [<c0515288>] (dump_stack+0x80/0xc4) from [<c0025340>]
(warn_slowpath_common+0x64/0x88)
[ 71.648151] [<c0025340>] (warn_slowpath_common+0x64/0x88) from [<c00253f8>]
(warn_slowpath_fmt+0x30/0x40)
[ 71.648161] [<c00253f8>] (warn_slowpath_fmt+0x30/0x40) from [<c007ff8c>]
(irq_set_irq_wake+0xb8/0xf0)
[ 71.648178] [<c007ff8c>] (irq_set_irq_wake+0xb8/0xf0) from [<c0334d00>]
(tps6586x_rtc_resume+0x30/0x38)
[ 71.648192] [<c0334d00>] (tps6586x_rtc_resume+0x30/0x38) from [<c02951d0>]
(platform_pm_resume+0x2c/0x4c)
[ 71.648202] [<c02951d0>] (platform_pm_resume+0x2c/0x4c) from [<c0299d40>]
(dpm_run_callback.isra.5+0x18/0x38)
[ 71.648211] [<c0299d40>] (dpm_run_callback.isra.5+0x18/0x38) from
[<c029a044>] (device_resume+0xb0/0x170)
[ 71.648219] [<c029a044>] (device_resume+0xb0/0x170) from [<c029aeb4>]
(dpm_resume+0xe8/0x20c)
[ 71.648227] [<c029aeb4>] (dpm_resume+0xe8/0x20c) from [<c029b174>]
(dpm_resume_end+0xc/0x18)
[ 71.648245] [<c029b174>] (dpm_resume_end+0xc/0x18) from [<c005e480>]
(suspend_devices_and_enter+0xdc/0x2f8)
[ 71.648256] [<c005e480>] (suspend_devices_and_enter+0xdc/0x2f8) from
[<c005e810>] (pm_suspend+0x174/0x1e8)
[ 71.648265] [<c005e810>] (pm_suspend+0x174/0x1e8) from [<c005d710>]
(state_store+0x6c/0xbc)
[ 71.648285] [<c005d710>] (state_store+0x6c/0xbc) from [<c01eca78>]
(kobj_attr_store+0x14/0x20)
[ 71.648298] [<c01eca78>] (kobj_attr_store+0x14/0x20) from [<c011e970>]
(sysfs_write_file+0x168/0x198)
[ 71.648312] [<c011e970>] (sysfs_write_file+0x168/0x198) from [<c00cd060>]
(vfs_write+0xb0/0x188)
[ 71.648321] [<c00cd060>] (vfs_write+0xb0/0x188) from [<c00cd410>]
(SyS_write+0x3c/0x70)
[ 71.648330] [<c00cd410>] (SyS_write+0x3c/0x70) from [<c000e560>]
(ret_fast_syscall+0x0/0x30)
[ 71.648334] ---[ end trace e5ed8212ac4db5da ]---
[ 72.063578] mmc1: power class selection to bus width 8 failed
[ 72.297753] usb 2-1: reset high-speed USB device number 2 using tegra-ehci
[ 72.567736] usb 3-1: reset high-speed USB device number 2 using tegra-ehci
[ 73.022058] usb 3-1.3: reset high-speed USB device number 4 using tegra-
ehci
[ 73.216064] usb 3-1.2: reset high-speed USB device number 3 using tegra-
ehci
[ 73.360225] PM: resume of devices complete after 1715.937 msecs
[ 73.361008] Restarting tasks ... done.
and sdcard being offline after resume (fixed by CONFIG_MMC_UNSAFE_RESUME=y).
Anyway, thanks for your great work!
Tested-By: Marc Dietrich <marvin24@gmx.de>
> And tested with THUMB2_KERNEL as well.
>
> P.S.
> A known issue on Dalmore, the LP1 resume may take 10 ~ 15 seconds due to
> the 792MHz BCT. It can't be reproduced on Seaboard or Cardhu. And the
> root cause of this is about the default settings of EMC registers that
> cause the DRAM can't leave self-refresh mode immediately. If you want
> to test with quick LP1 resume on Dalmore, I can provide another HACK for
> this.
>
> Joseph Lo (8):
> ARM: tegra: add common resume handling code for LP1 resuming
> ARM: tegra: config the polarity of the request of sys clock
> clk: tegra114: add LP1 suspend/resume support
> ARM: tegra: add common LP1 suspend support
> ARM: tegra30: add LP1 suspend support
> ARM: tegra20: add LP1 suspend support
> ARM: tegra114: add LP1 suspend support
> ARM: dts: tegra: enable LP1 suspend mode
>
> arch/arm/boot/dts/tegra114-dalmore.dts | 2 +-
> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 2 +-
> arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
> arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
> arch/arm/boot/dts/tegra20-seaboard.dts | 2 +-
> arch/arm/boot/dts/tegra20-tamonten.dtsi | 2 +-
> arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
> arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
> arch/arm/boot/dts/tegra20-whistler.dts | 2 +-
> arch/arm/boot/dts/tegra30-beaver.dts | 2 +-
> arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +-
> arch/arm/mach-tegra/Makefile | 3 +
> arch/arm/mach-tegra/iomap.h | 6 +
> arch/arm/mach-tegra/pm-tegra20.c | 37 ++
> arch/arm/mach-tegra/pm-tegra30.c | 37 ++
> arch/arm/mach-tegra/pm.c | 121 +++++-
> arch/arm/mach-tegra/pm.h | 23 ++
> arch/arm/mach-tegra/pmc.c | 36 +-
> arch/arm/mach-tegra/pmc.h | 3 +
> arch/arm/mach-tegra/reset-handler.S | 13 +
> arch/arm/mach-tegra/reset.c | 2 +
> arch/arm/mach-tegra/reset.h | 4 +
> arch/arm/mach-tegra/sleep-tegra20.S | 300 ++++++++++++++
> arch/arm/mach-tegra/sleep-tegra30.S | 615
> +++++++++++++++++++++++++++++ arch/arm/mach-tegra/sleep.S |
> 8 +-
> arch/arm/mach-tegra/sleep.h | 18 +
> drivers/clk/tegra/clk-tegra114.c | 32 ++
> 27 files changed, 1259 insertions(+), 21 deletions(-)
> create mode 100644 arch/arm/mach-tegra/pm-tegra20.c
> create mode 100644 arch/arm/mach-tegra/pm-tegra30.c
next prev parent reply other threads:[~2013-07-27 16:12 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 9:15 [PATCH 0/8] ARM: tegra: support LP1 suspend mode Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-1-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-26 9:15 ` [PATCH 1/8] ARM: tegra: add common resume handling code for LP1 resuming Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-2-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-29 22:38 ` Stephen Warren
2013-07-29 22:38 ` Stephen Warren
2013-07-26 9:15 ` [PATCH 2/8] ARM: tegra: config the polarity of the request of sys clock Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-3-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-29 22:47 ` Stephen Warren
2013-07-29 22:47 ` Stephen Warren
[not found] ` <51F6F109.8010102-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-02 7:48 ` Joseph Lo
2013-08-02 7:48 ` Joseph Lo
[not found] ` <1375429739.6761.31.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-02 20:24 ` Stephen Warren
2013-08-02 20:24 ` Stephen Warren
[not found] ` <51FC1579.50100-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-05 8:42 ` Joseph Lo
2013-08-05 8:42 ` Joseph Lo
2013-07-26 9:15 ` [PATCH 3/8] clk: tegra114: add LP1 suspend/resume support Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-4-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-29 22:51 ` Stephen Warren
2013-07-29 22:51 ` Stephen Warren
[not found] ` <51F6F209.2090309-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-02 8:09 ` Joseph Lo
2013-08-02 8:09 ` Joseph Lo
[not found] ` <1375430985.6761.51.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-02 20:32 ` Stephen Warren
2013-08-02 20:32 ` Stephen Warren
[not found] ` <51FC1751.9010401-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-05 8:02 ` Joseph Lo
2013-08-05 8:02 ` Joseph Lo
[not found] ` <1375689749.1731.36.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-05 17:00 ` Stephen Warren
2013-08-05 17:00 ` Stephen Warren
[not found] ` <51FFDA20.6050403-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-05 17:39 ` Stephen Warren
2013-08-05 17:39 ` Stephen Warren
[not found] ` <51FFE363.4080603-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-06 9:10 ` Joseph Lo
2013-08-06 9:10 ` Joseph Lo
[not found] ` <1375780249.2261.63.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-06 18:37 ` Stephen Warren
2013-08-06 18:37 ` Stephen Warren
[not found] ` <52014258.9070602-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-07 9:12 ` Joseph Lo
2013-08-07 9:12 ` Joseph Lo
[not found] ` <1375866749.8111.57.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-07 16:46 ` Stephen Warren
2013-08-07 16:46 ` Stephen Warren
[not found] ` <520279FC.1000006-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-08 2:23 ` Joseph Lo
2013-08-08 2:23 ` Joseph Lo
[not found] ` <1375928591.1758.66.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-08 19:54 ` Stephen Warren
2013-08-08 19:54 ` Stephen Warren
[not found] ` <5203F766.9050100-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-09 9:23 ` Joseph Lo
2013-08-09 9:23 ` Joseph Lo
2013-08-06 9:19 ` Joseph Lo
2013-08-06 9:19 ` Joseph Lo
2013-07-26 9:15 ` [PATCH 4/8] ARM: tegra: add common LP1 suspend support Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-5-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-29 23:13 ` Stephen Warren
2013-07-29 23:13 ` Stephen Warren
[not found] ` <51F6F725.6000106-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-02 9:27 ` Joseph Lo
2013-08-02 9:27 ` Joseph Lo
[not found] ` <1375435620.6761.120.camel-yx3yKKdKkHfc7b1ADBJPm0n48jw8i0AO@public.gmane.org>
2013-08-02 20:40 ` Stephen Warren
2013-08-02 20:40 ` Stephen Warren
2013-08-05 8:07 ` Joseph Lo
2013-08-05 8:07 ` Joseph Lo
2013-07-26 9:15 ` [PATCH 5/8] ARM: tegra30: add " Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-6-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-29 23:45 ` Stephen Warren
2013-07-29 23:45 ` Stephen Warren
[not found] ` <51F6FE89.4060402-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-05 6:46 ` Joseph Lo
2013-08-05 6:46 ` Joseph Lo
2013-07-26 9:15 ` [PATCH 6/8] ARM: tegra20: " Joseph Lo
2013-07-26 9:15 ` Joseph Lo
2013-07-26 9:15 ` [PATCH 7/8] ARM: tegra114: " Joseph Lo
2013-07-26 9:15 ` Joseph Lo
[not found] ` <1374830110-30685-8-git-send-email-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-07-29 23:53 ` Stephen Warren
2013-07-29 23:53 ` Stephen Warren
[not found] ` <51F7007F.6090200-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-08-05 6:51 ` Joseph Lo
2013-08-05 6:51 ` Joseph Lo
2013-07-26 9:15 ` [PATCH 8/8] ARM: dts: tegra: enable LP1 suspend mode Joseph Lo
2013-07-26 9:15 ` Joseph Lo
2013-07-27 16:12 ` Marc Dietrich [this message]
2013-07-27 16:12 ` [PATCH 0/8] ARM: tegra: support " Marc Dietrich
2013-07-27 16:20 ` Dmitry Osipenko
2013-07-27 16:20 ` Dmitry Osipenko
[not found] ` <51F3F356.8080709-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-07-27 18:09 ` Marc Dietrich
2013-07-27 18:09 ` Marc Dietrich
2013-07-27 18:26 ` Dmitry Osipenko
2013-07-27 18:26 ` Dmitry Osipenko
[not found] ` <51F410BE.3000904-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-07-27 18:29 ` Dmitry Osipenko
2013-07-27 18:29 ` Dmitry Osipenko
2013-07-27 19:03 ` Marc Dietrich
2013-07-27 19:03 ` Marc Dietrich
2013-07-27 19:11 ` Dmitry Osipenko
2013-07-27 19:11 ` Dmitry Osipenko
2013-07-30 9:49 ` Joseph Lo
2013-07-30 9:49 ` Joseph Lo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2389689.JgQlW00RdN@ax5200p \
--to=marvin24-mmb7mzphnfy@public.gmane.org \
--cc=josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.