From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
"aneesh.kumar@linux.ibm.com" <aneesh.kumar@linux.ibm.com>
Subject: Re: [PATCH v5 0/9] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK
Date: Mon, 8 Oct 2018 13:30:01 +0000 [thread overview]
Message-ID: <23afad6f-7feb-b36f-e27e-d1b48350517d@c-s.fr> (raw)
In-Reply-To: <87pnwk1yw4.fsf@concordia.ellerman.id.au>
On 10/08/2018 11:06 AM, Michael Ellerman wrote:
> Christophe Leroy <christophe.leroy@c-s.fr> writes:
>
>> The purpose of this serie is to activate CONFIG_THREAD_INFO_IN_TASK which
>> moves the thread_info into task_struct.
>>
>> Moving thread_info into task_struct has the following advantages:
>> - It protects thread_info from corruption in the case of stack
>> overflows.
>> - Its address is harder to determine if stack addresses are
>> leaked, making a number of attacks more difficult.
>
> This is blowing up pretty nicely with CONFIG_KMEMLEAK enabled, haven't
> had time to dig further:
Nice :)
I have the same issue on PPC32.
Seems like when descending the stack, save_context_stack() calls
validate_sp(), which in turn calls valid_irq_stack() when the first test
fails.
But than early, hardirq_ctx[cpu] is NULL.
With sp = 0, valid_irq_stack() used to return false because it expected
sp to be above the thread_info. But now that thread_info is gone, sp = 0
is valid when stack = NULL.
The following fixes it:
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index afe76f7f316c..3e534147fd8f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -2006,6 +2006,9 @@ int validate_sp(unsigned long sp, struct
task_struct *p,
{
unsigned long stack_page = (unsigned long)task_stack_page(p);
+ if (sp < THREAD_SIZE)
+ return 0;
+
if (sp >= stack_page + sizeof(struct thread_struct)
&& sp <= stack_page + THREAD_SIZE - nbytes)
return 1;
Looking at this I also realise I forgot to remove the sizeof(struct
thread_struct) from here. And this sizeof() was buggy, it should have
been thread_info instead of thread_struct, but nevermind as it is going
away.
Christophe
>
> Unable to handle kernel paging request for data at address 0x00000000
> Faulting instruction address: 0xc000000000022064
> Oops: Kernel access of bad area, sig: 11 [#9]
> LE SMP NR_CPUS=32 NUMA
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-gcc-7.3.1-00103-gc795acc08338 #268
> NIP: c000000000022064 LR: c0000000000220c0 CTR: c00000000001f5c0
> REGS: c000000001244a50 TRAP: 0380 Not tainted (4.19.0-rc3-gcc-7.3.1-00103-gc795acc08338)
> MSR: 8000000000001033 <SF,ME,IR,DR,RI,LE> CR: 48022244 XER: 20000000
> CFAR: c0000000000220c4 IRQMASK: 1
> GPR00: c0000000000220c0 c000000001244cd0 c00000000124b200 0000000000000001
> GPR04: c000000001201180 0000000000000070 c000000001275ef8 0000000000000000
> GPR08: 0000000000000000 0000000000000001 0000000000003f90 2b6e6f6d6d6f635f
> GPR12: c00000000001f5c0 c000000001450000 0000000000000000 0000000002e2be38
> GPR16: 000000007dc54c70 0000000002d854b8 0000000000000000 c000000000d87f00
> GPR20: c000000000d87ef0 c000000000d87ee0 c000000000d87f08 c00000000006c1a8
> GPR24: c000000000d87ec8 0000000000000000 7265677368657265 c000000000062a04
> GPR28: 0000000000000006 c000000001201180 0000000000000000 0000000000000000
> NIP [c000000000022064] show_stack+0xe4/0x2b0
> LR [c0000000000220c0] show_stack+0x140/0x2b0
> Call Trace:
> [c000000001244cd0] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001244da0] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001244e50] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001244ed0] [c00000000002b954] die+0x74/0xf0
> [c000000001244f10] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001244f80] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001244fc0] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c0000000012452b0] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001245380] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001245430] [c00000000002ae8c] __die+0xfc/0x140
> [c0000000012454b0] [c00000000002b954] die+0x74/0xf0
> [c0000000012454f0] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001245560] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c0000000012455a0] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001245890] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001245960] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001245a10] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001245a90] [c00000000002b954] die+0x74/0xf0
> [c000000001245ad0] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001245b40] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001245b80] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001245e70] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001245f40] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001245ff0] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001246070] [c00000000002b954] die+0x74/0xf0
> [c0000000012460b0] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001246120] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001246160] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001246450] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001246520] [c00000000002245c] show_regs+0x22c/0x430
> [c0000000012465d0] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001246650] [c00000000002b954] die+0x74/0xf0
> [c000000001246690] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001246700] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001246740] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001246a30] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001246b00] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001246bb0] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001246c30] [c00000000002b954] die+0x74/0xf0
> [c000000001246c70] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001246ce0] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001246d20] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001247010] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c0000000012470e0] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001247190] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001247210] [c00000000002b954] die+0x74/0xf0
> [c000000001247250] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c0000000012472c0] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001247300] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c0000000012475f0] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c0000000012476c0] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001247770] [c00000000002ae8c] __die+0xfc/0x140
> [c0000000012477f0] [c00000000002b954] die+0x74/0xf0
> [c000000001247830] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c0000000012478a0] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c0000000012478e0] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at save_context_stack+0x70/0x110
> LR = save_context_stack+0x64/0x110
> [c000000001247bd0] [c000000001247c10] init_stack+0x3c10/0x4000 (unreliable)
> [c000000001247c10] [c000000000ee2268] log_early+0xc0/0x100
> [c000000001247c70] [c000000000ede7f8] memblock_virt_alloc_internal+0x1cc/0x210
> [c000000001247d20] [c000000000edec00] memblock_virt_alloc_try_nid+0x94/0xfc
> [c000000001247db0] [c000000000f08efc] early_init_dt_alloc_memory_arch+0x2c/0x40
> [c000000001247dd0] [c000000000991200] __unflatten_device_tree+0xa0/0x1e0
> [c000000001247e60] [c000000000f0a1d8] unflatten_device_tree+0x48/0x68
> [c000000001247e90] [c000000000eab6fc] setup_arch+0x4c/0x3fc
> [c000000001247f00] [c000000000ea3df8] start_kernel+0x88/0x604
> Instruction dump:
> 3ec2ffb4 3b800041 3bc00001 3b600000 3b18ccc8 3a73cd00 3a94ccf0 3ab5cce0
> 635a7265 3ad6cd08 48000054 2e3e0000 <ea5f0000> ebdf0010 419200e8 7fbbf040
> random: get_random_bytes called from print_oops_end_marker+0x6c/0xa0 with crng_init=0
> ---[ end trace 0000000000000000 ]---
>
>
>
> cheers
>
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>
Cc: "aneesh.kumar@linux.ibm.com" <aneesh.kumar@linux.ibm.com>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 0/9] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK
Date: Mon, 8 Oct 2018 13:30:01 +0000 [thread overview]
Message-ID: <23afad6f-7feb-b36f-e27e-d1b48350517d@c-s.fr> (raw)
In-Reply-To: <87pnwk1yw4.fsf@concordia.ellerman.id.au>
On 10/08/2018 11:06 AM, Michael Ellerman wrote:
> Christophe Leroy <christophe.leroy@c-s.fr> writes:
>
>> The purpose of this serie is to activate CONFIG_THREAD_INFO_IN_TASK which
>> moves the thread_info into task_struct.
>>
>> Moving thread_info into task_struct has the following advantages:
>> - It protects thread_info from corruption in the case of stack
>> overflows.
>> - Its address is harder to determine if stack addresses are
>> leaked, making a number of attacks more difficult.
>
> This is blowing up pretty nicely with CONFIG_KMEMLEAK enabled, haven't
> had time to dig further:
Nice :)
I have the same issue on PPC32.
Seems like when descending the stack, save_context_stack() calls
validate_sp(), which in turn calls valid_irq_stack() when the first test
fails.
But than early, hardirq_ctx[cpu] is NULL.
With sp = 0, valid_irq_stack() used to return false because it expected
sp to be above the thread_info. But now that thread_info is gone, sp = 0
is valid when stack = NULL.
The following fixes it:
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index afe76f7f316c..3e534147fd8f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -2006,6 +2006,9 @@ int validate_sp(unsigned long sp, struct
task_struct *p,
{
unsigned long stack_page = (unsigned long)task_stack_page(p);
+ if (sp < THREAD_SIZE)
+ return 0;
+
if (sp >= stack_page + sizeof(struct thread_struct)
&& sp <= stack_page + THREAD_SIZE - nbytes)
return 1;
Looking at this I also realise I forgot to remove the sizeof(struct
thread_struct) from here. And this sizeof() was buggy, it should have
been thread_info instead of thread_struct, but nevermind as it is going
away.
Christophe
>
> Unable to handle kernel paging request for data at address 0x00000000
> Faulting instruction address: 0xc000000000022064
> Oops: Kernel access of bad area, sig: 11 [#9]
> LE SMP NR_CPUS=32 NUMA
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-gcc-7.3.1-00103-gc795acc08338 #268
> NIP: c000000000022064 LR: c0000000000220c0 CTR: c00000000001f5c0
> REGS: c000000001244a50 TRAP: 0380 Not tainted (4.19.0-rc3-gcc-7.3.1-00103-gc795acc08338)
> MSR: 8000000000001033 <SF,ME,IR,DR,RI,LE> CR: 48022244 XER: 20000000
> CFAR: c0000000000220c4 IRQMASK: 1
> GPR00: c0000000000220c0 c000000001244cd0 c00000000124b200 0000000000000001
> GPR04: c000000001201180 0000000000000070 c000000001275ef8 0000000000000000
> GPR08: 0000000000000000 0000000000000001 0000000000003f90 2b6e6f6d6d6f635f
> GPR12: c00000000001f5c0 c000000001450000 0000000000000000 0000000002e2be38
> GPR16: 000000007dc54c70 0000000002d854b8 0000000000000000 c000000000d87f00
> GPR20: c000000000d87ef0 c000000000d87ee0 c000000000d87f08 c00000000006c1a8
> GPR24: c000000000d87ec8 0000000000000000 7265677368657265 c000000000062a04
> GPR28: 0000000000000006 c000000001201180 0000000000000000 0000000000000000
> NIP [c000000000022064] show_stack+0xe4/0x2b0
> LR [c0000000000220c0] show_stack+0x140/0x2b0
> Call Trace:
> [c000000001244cd0] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001244da0] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001244e50] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001244ed0] [c00000000002b954] die+0x74/0xf0
> [c000000001244f10] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001244f80] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001244fc0] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c0000000012452b0] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001245380] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001245430] [c00000000002ae8c] __die+0xfc/0x140
> [c0000000012454b0] [c00000000002b954] die+0x74/0xf0
> [c0000000012454f0] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001245560] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c0000000012455a0] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001245890] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001245960] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001245a10] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001245a90] [c00000000002b954] die+0x74/0xf0
> [c000000001245ad0] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001245b40] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001245b80] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001245e70] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001245f40] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001245ff0] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001246070] [c00000000002b954] die+0x74/0xf0
> [c0000000012460b0] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001246120] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001246160] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001246450] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001246520] [c00000000002245c] show_regs+0x22c/0x430
> [c0000000012465d0] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001246650] [c00000000002b954] die+0x74/0xf0
> [c000000001246690] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001246700] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001246740] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001246a30] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c000000001246b00] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001246bb0] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001246c30] [c00000000002b954] die+0x74/0xf0
> [c000000001246c70] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c000000001246ce0] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001246d20] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c000000001247010] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c0000000012470e0] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001247190] [c00000000002ae8c] __die+0xfc/0x140
> [c000000001247210] [c00000000002b954] die+0x74/0xf0
> [c000000001247250] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c0000000012472c0] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c000000001247300] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at show_stack+0xe4/0x2b0
> LR = show_stack+0x140/0x2b0
> [c0000000012475f0] [c00000000002217c] show_stack+0x1fc/0x2b0 (unreliable)
> [c0000000012476c0] [c00000000002245c] show_regs+0x22c/0x430
> [c000000001247770] [c00000000002ae8c] __die+0xfc/0x140
> [c0000000012477f0] [c00000000002b954] die+0x74/0xf0
> [c000000001247830] [c00000000006e0f8] bad_page_fault+0xe8/0x180
> [c0000000012478a0] [c000000000074f48] slb_miss_large_addr+0x68/0x2e0
> [c0000000012478e0] [c000000000008ce8] large_addr_slb+0x158/0x160
> --- interrupt: 380 at save_context_stack+0x70/0x110
> LR = save_context_stack+0x64/0x110
> [c000000001247bd0] [c000000001247c10] init_stack+0x3c10/0x4000 (unreliable)
> [c000000001247c10] [c000000000ee2268] log_early+0xc0/0x100
> [c000000001247c70] [c000000000ede7f8] memblock_virt_alloc_internal+0x1cc/0x210
> [c000000001247d20] [c000000000edec00] memblock_virt_alloc_try_nid+0x94/0xfc
> [c000000001247db0] [c000000000f08efc] early_init_dt_alloc_memory_arch+0x2c/0x40
> [c000000001247dd0] [c000000000991200] __unflatten_device_tree+0xa0/0x1e0
> [c000000001247e60] [c000000000f0a1d8] unflatten_device_tree+0x48/0x68
> [c000000001247e90] [c000000000eab6fc] setup_arch+0x4c/0x3fc
> [c000000001247f00] [c000000000ea3df8] start_kernel+0x88/0x604
> Instruction dump:
> 3ec2ffb4 3b800041 3bc00001 3b600000 3b18ccc8 3a73cd00 3a94ccf0 3ab5cce0
> 635a7265 3ad6cd08 48000054 2e3e0000 <ea5f0000> ebdf0010 419200e8 7fbbf040
> random: get_random_bytes called from print_oops_end_marker+0x6c/0xa0 with crng_init=0
> ---[ end trace 0000000000000000 ]---
>
>
>
> cheers
>
next prev parent reply other threads:[~2018-10-08 13:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 7:32 [PATCH v5 0/9] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 1/9] book3s/64: avoid circular header inclusion in mmu-hash.h Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 13:45 ` Christophe LEROY
2018-10-06 12:47 ` Michael Ellerman
2018-10-07 16:43 ` Christophe LEROY
2018-10-05 7:32 ` [PATCH v5 2/9] powerpc: Only use task_struct 'cpu' field on SMP Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 3/9] powerpc: Prepare for moving thread_info into task_struct Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-06 12:40 ` Michael Ellerman
2018-10-06 12:40 ` Michael Ellerman
2018-10-07 5:31 ` Christophe Leroy
2018-10-07 5:31 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 4/9] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 5/9] powerpc: regain entire stack space Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 6/9] powerpc: 'current_set' is now a table of task_struct pointers Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 7/9] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 8/9] powerpc/64: Remove CURRENT_THREAD_INFO Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-05 7:32 ` [PATCH v5 9/9] powerpc: clean stack pointers naming Christophe Leroy
2018-10-05 7:32 ` Christophe Leroy
2018-10-08 11:06 ` [PATCH v5 0/9] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK Michael Ellerman
2018-10-08 13:30 ` Christophe Leroy [this message]
2018-10-08 13:30 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=23afad6f-7feb-b36f-e27e-d1b48350517d@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=aneesh.kumar@linux.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.