From: Thomas Monjalon <thomas@monjalon.net>
To: Yongseok Koh <yskoh@mellanox.com>
Cc: dev@dpdk.org, ferruh.yigit@intel.com, adrien.mazarguil@6wind.com,
nelio.laranjeiro@6wind.com, bruce.richardson@intel.com
Subject: Re: [PATCH v2 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1
Date: Tue, 04 Jul 2017 01:54:49 +0200 [thread overview]
Message-ID: <2455635.l2mxHbxyCj@xps> (raw)
In-Reply-To: <969ef71aa84f02c19f7fe011fe75e25049177d76.1498850005.git.yskoh@mellanox.com>
30/06/2017 21:23, Yongseok Koh:
> --- a/drivers/net/mlx5/Makefile
> +++ b/drivers/net/mlx5/Makefile
> @@ -39,6 +39,11 @@ SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5.c
> SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rxq.c
> SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_txq.c
> SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rxtx.c
> +ifneq ($(findstring RTE_MACHINE_CPUFLAG_SSE4_1,$(CFLAGS)),)
> +ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
> +SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_rxtx_vec_sse.c
> +endif
> +endif
[...]
> +#check if flag for SSE4.1 is already on, if not set it up manually
> +ifeq ($(findstring RTE_MACHINE_CPUFLAG_SSE4_1,$(CFLAGS)),)
> +CFLAGS_mlx5_rxtx_vec_sse.o += -msse4.1
> +endif
You can remove this check and SSE flag because SSE4.2 is now
the minimum requirement for DPDK on x86:
http://dpdk.org/patch/25444
next prev parent reply other threads:[~2017-07-03 23:54 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-28 23:03 [PATCH 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-06-28 23:03 ` [PATCH 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-06-30 12:20 ` Nélio Laranjeiro
2017-06-28 23:04 ` [PATCH 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-06-30 12:30 ` Nélio Laranjeiro
2017-06-30 12:43 ` Nélio Laranjeiro
2017-06-30 17:49 ` Yongseok Koh
2017-06-28 23:04 ` [PATCH 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-06-30 13:01 ` Nélio Laranjeiro
2017-06-30 18:58 ` Yongseok Koh
2017-06-28 23:04 ` [PATCH 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-06-30 13:02 ` Nélio Laranjeiro
2017-06-28 23:04 ` [PATCH 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-06-30 19:23 ` [PATCH v2 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-06-30 19:23 ` [PATCH v2 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-03 13:48 ` Nélio Laranjeiro
2017-06-30 19:23 ` [PATCH v2 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-03 13:58 ` Nélio Laranjeiro
2017-06-30 19:23 ` [PATCH v2 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-03 14:06 ` Nélio Laranjeiro
2017-07-03 20:54 ` Yongseok Koh
2017-07-04 6:54 ` Nélio Laranjeiro
2017-06-30 19:23 ` [PATCH v2 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-03 13:49 ` Nélio Laranjeiro
2017-06-30 19:23 ` [PATCH v2 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-07-03 23:54 ` Thomas Monjalon [this message]
2017-07-04 8:58 ` Nélio Laranjeiro
2017-07-05 0:38 ` Yongseok Koh
2017-07-05 8:21 ` Nélio Laranjeiro
2017-07-05 17:41 ` Yongseok Koh
2017-06-30 21:28 ` [PATCH v2 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Bruce Richardson
2017-07-05 18:12 ` [PATCH v3 " Yongseok Koh
2017-07-05 18:12 ` [PATCH v3 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-05 18:12 ` [PATCH v3 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-05 18:12 ` [PATCH v3 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-05 18:12 ` [PATCH v3 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-06 7:17 ` Nélio Laranjeiro
2017-07-05 18:12 ` [PATCH v3 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-07-05 22:58 ` Yongseok Koh
2017-07-06 7:16 ` Nélio Laranjeiro
2017-07-06 9:58 ` Ferruh Yigit
2017-07-06 18:41 ` [PATCH v4 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-07-06 18:41 ` [PATCH v4 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-06 18:41 ` [PATCH v4 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-06 18:41 ` [PATCH v4 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-06 18:41 ` [PATCH v4 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-06 18:41 ` [PATCH v4 5/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-07-07 9:58 ` [PATCH v4 0/5] " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2455635.l2mxHbxyCj@xps \
--to=thomas@monjalon.net \
--cc=adrien.mazarguil@6wind.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=nelio.laranjeiro@6wind.com \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.