All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yongseok Koh <yskoh@mellanox.com>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org, adrien.mazarguil@6wind.com,
	nelio.laranjeiro@6wind.com, Yongseok Koh <yskoh@mellanox.com>
Subject: [PATCH v2 2/5] net/mlx5: free buffers in bulk on Tx completion
Date: Fri, 30 Jun 2017 12:23:30 -0700	[thread overview]
Message-ID: <ae4a30465629722a428f36f14bb103298a09d31e.1498850005.git.yskoh@mellanox.com> (raw)
In-Reply-To: <cover.1498850005.git.yskoh@mellanox.com>

When processing Tx completion, it is more efficient to free buffers in bulk
using rte_mempool_put_bulk() if buffers are from a same mempool.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
---
 drivers/net/mlx5/mlx5_rxtx.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index 43db06ad8..66593679f 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -264,6 +264,9 @@ txq_complete(struct txq *txq)
 	uint16_t cq_ci = txq->cq_ci;
 	volatile struct mlx5_cqe *cqe = NULL;
 	volatile struct mlx5_wqe_ctrl *ctrl;
+	struct rte_mbuf *m, *free[elts_n];
+	struct rte_mempool *pool = NULL;
+	unsigned int blk_n = 0;
 
 	do {
 		volatile struct mlx5_cqe *tmp;
@@ -296,21 +299,33 @@ txq_complete(struct txq *txq)
 	assert((elts_tail & elts_m) < (1 << txq->wqe_n));
 	/* Free buffers. */
 	while (elts_free != elts_tail) {
-		struct rte_mbuf *elt = (*txq->elts)[elts_free & elts_m];
-		struct rte_mbuf *elt_next =
-			(*txq->elts)[(elts_free + 1) & elts_m];
-
+		m = rte_pktmbuf_prefree_seg((*txq->elts)[elts_free++ & elts_m]);
+		if (likely(m != NULL)) {
+			if (likely(m->pool == pool)) {
+				free[blk_n++] = m;
+			} else {
+				if (likely(pool != NULL))
+					rte_mempool_put_bulk(pool,
+							     (void *)free,
+							     blk_n);
+				free[0] = m;
+				pool = m->pool;
+				blk_n = 1;
+			}
+		}
+	}
+	if (blk_n)
+		rte_mempool_put_bulk(pool, (void *)free, blk_n);
 #ifndef NDEBUG
-		/* Poisoning. */
+	elts_free = txq->elts_tail;
+	/* Poisoning. */
+	while (elts_free != elts_tail) {
 		memset(&(*txq->elts)[elts_free & elts_m],
 		       0x66,
 		       sizeof((*txq->elts)[elts_free & elts_m]));
-#endif
-		RTE_MBUF_PREFETCH_TO_FREE(elt_next);
-		/* Only one segment needs to be freed. */
-		rte_pktmbuf_free_seg(elt);
 		++elts_free;
 	}
+#endif
 	txq->cq_ci = cq_ci;
 	txq->elts_tail = elts_tail;
 	/* Update the consumer index. */
-- 
2.11.0

  parent reply	other threads:[~2017-06-30 19:23 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-28 23:03 [PATCH 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-06-28 23:03 ` [PATCH 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-06-30 12:20   ` Nélio Laranjeiro
2017-06-28 23:04 ` [PATCH 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-06-30 12:30   ` Nélio Laranjeiro
2017-06-30 12:43     ` Nélio Laranjeiro
2017-06-30 17:49       ` Yongseok Koh
2017-06-28 23:04 ` [PATCH 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-06-30 13:01   ` Nélio Laranjeiro
2017-06-30 18:58     ` Yongseok Koh
2017-06-28 23:04 ` [PATCH 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-06-30 13:02   ` Nélio Laranjeiro
2017-06-28 23:04 ` [PATCH 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-06-30 19:23 ` [PATCH v2 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-06-30 19:23   ` [PATCH v2 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-03 13:48     ` Nélio Laranjeiro
2017-06-30 19:23   ` Yongseok Koh [this message]
2017-07-03 13:58     ` [PATCH v2 2/5] net/mlx5: free buffers in bulk on Tx completion Nélio Laranjeiro
2017-06-30 19:23   ` [PATCH v2 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-03 14:06     ` Nélio Laranjeiro
2017-07-03 20:54       ` Yongseok Koh
2017-07-04  6:54         ` Nélio Laranjeiro
2017-06-30 19:23   ` [PATCH v2 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-03 13:49     ` Nélio Laranjeiro
2017-06-30 19:23   ` [PATCH v2 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-07-03 23:54     ` Thomas Monjalon
2017-07-04  8:58     ` Nélio Laranjeiro
2017-07-05  0:38       ` Yongseok Koh
2017-07-05  8:21         ` Nélio Laranjeiro
2017-07-05 17:41           ` Yongseok Koh
2017-06-30 21:28   ` [PATCH v2 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Bruce Richardson
2017-07-05 18:12 ` [PATCH v3 " Yongseok Koh
2017-07-05 18:12   ` [PATCH v3 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-05 18:12   ` [PATCH v3 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-05 18:12   ` [PATCH v3 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-05 18:12   ` [PATCH v3 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-06  7:17     ` Nélio Laranjeiro
2017-07-05 18:12   ` [PATCH v3 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-07-05 22:58     ` Yongseok Koh
2017-07-06  7:16     ` Nélio Laranjeiro
2017-07-06  9:58     ` Ferruh Yigit
2017-07-06 18:41 ` [PATCH v4 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-07-06 18:41   ` [PATCH v4 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-06 18:41   ` [PATCH v4 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-06 18:41   ` [PATCH v4 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-06 18:41   ` [PATCH v4 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-06 18:41   ` [PATCH v4 5/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-07-07  9:58   ` [PATCH v4 0/5] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ae4a30465629722a428f36f14bb103298a09d31e.1498850005.git.yskoh@mellanox.com \
    --to=yskoh@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=nelio.laranjeiro@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.