* [PATCH] an example for VF link reset
@ 2016-06-06 5:48 Wenzhuo Lu
2016-06-06 5:48 ` [PATCH] examples: add a new example for " Wenzhuo Lu
0 siblings, 1 reply; 7+ messages in thread
From: Wenzhuo Lu @ 2016-06-06 5:48 UTC (permalink / raw)
To: dev
Add a new example to show how to handle the reset event
on VF when PF link down/up.
PS: This patch set is base on the patch set *support reset
of VF link*.
Wenzhuo Lu (1):
examples: add a new example for link reset
MAINTAINERS | 4 +
doc/guides/sample_app_ug/link_reset.rst | 177 ++++++++
examples/link_reset/Makefile | 50 +++
examples/link_reset/main.c | 769 ++++++++++++++++++++++++++++++++
4 files changed, 1000 insertions(+)
create mode 100644 doc/guides/sample_app_ug/link_reset.rst
create mode 100644 examples/link_reset/Makefile
create mode 100644 examples/link_reset/main.c
--
1.9.3
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] examples: add a new example for link reset
2016-06-06 5:48 [PATCH] an example for VF link reset Wenzhuo Lu
@ 2016-06-06 5:48 ` Wenzhuo Lu
2016-06-08 0:25 ` Ananyev, Konstantin
0 siblings, 1 reply; 7+ messages in thread
From: Wenzhuo Lu @ 2016-06-06 5:48 UTC (permalink / raw)
To: dev; +Cc: Wenzhuo Lu
Add a new example to show when the PF is down and up,
VF port can be reset and recover.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
MAINTAINERS | 4 +
doc/guides/sample_app_ug/link_reset.rst | 177 ++++++++
examples/link_reset/Makefile | 50 +++
examples/link_reset/main.c | 769 ++++++++++++++++++++++++++++++++
4 files changed, 1000 insertions(+)
create mode 100644 doc/guides/sample_app_ug/link_reset.rst
create mode 100644 examples/link_reset/Makefile
create mode 100644 examples/link_reset/main.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 3e8558f..76879c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -650,3 +650,7 @@ F: examples/tep_termination/
F: examples/vmdq/
F: examples/vmdq_dcb/
F: doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
+
+M: Wenzhuo Lu <wenzhuo.lu@intel.com>
+F: examples/link_reset/
+F: doc/guides/sample_app_ug/link_reset.rst
diff --git a/doc/guides/sample_app_ug/link_reset.rst b/doc/guides/sample_app_ug/link_reset.rst
new file mode 100644
index 0000000..fecae6d
--- /dev/null
+++ b/doc/guides/sample_app_ug/link_reset.rst
@@ -0,0 +1,177 @@
+.. BSD LICENSE
+ Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Link Reset Sample Application (in Virtualized Environments)
+===========================================================
+
+The Link Reset sample application is a simple example of VF traffic recovery
+using the Data Plane Development Kit (DPDK) which also takes advantage of Single
+Root I/O Virtualization (SR-IOV) features in a virtualized environment.
+
+Overview
+--------
+
+The Link Reset sample application, which should operate in virtualized
+environments, performs L2 forwarding for each packet that is received on an
+RX_PORT.
+This example is extended from the L2 forwarding example. Please reference the
+example of L2 forwarding in virtualized environments for more details and
+explanation about the behavior of forwarding and how to setup the test.
+The purpose of this example is to show when the PF port is down and up, the VF
+port can recover and the traffic can recover too.
+
+Virtual Function Setup Instructions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This application can use the virtual function available in the system and
+therefore can be used in a virtual machine without passing through
+the whole Network Device into a guest machine in a virtualized scenario.
+The virtual functions can be enabled in the host machine or the hypervisor
+with the respective physical function driver.
+
+For example, in a Linux* host machine, it is possible to enable a virtual
+function using the following command:
+
+.. code-block:: console
+
+ modprobe ixgbe max_vfs=2,2
+
+This command enables two Virtual Functions on each of Physical Function of the
+NIC, with two physical ports in the PCI configuration space.
+It is important to note that enabled Virtual Function 0 and 2 would belong to
+Physical Function 0 and Virtual Function 1 and 3 would belong to Physical
+Function 1, in this case enabling a total of four Virtual Functions.
+
+Compiling the Application
+-------------------------
+
+#. Go to the example directory:
+
+ .. code-block:: console
+
+ export RTE_SDK=/path/to/rte_sdk
+ cd ${RTE_SDK}/examples/link_reset
+
+#. Set the target (a default target is used if not specified). For example:
+
+ .. code-block:: console
+
+ export RTE_TARGET=x86_64-native-linuxapp-gcc
+
+ *See the DPDK Getting Started Guide* for possible RTE_TARGET values.
+
+#. Build the application:
+
+ .. code-block:: console
+
+ make
+
+Running the Application
+-----------------------
+
+The application requires a number of command line options:
+
+.. code-block:: console
+
+ ./build/link_reset [EAL options] -- -p PORTMASK [-q NQ]
+
+where,
+
+* p PORTMASK: A hexadecimal bitmask of the ports to configure
+
+* q NQ: A number of queues (=ports) per lcore (default is 1)
+
+To run the application in linuxapp environment with 4 lcores, 16 ports and 8 RX
+queues per lcore, issue the command:
+
+.. code-block:: console
+
+ $ ./build/link_reset -c f -n 4 -- -q 8 -p ffff
+
+Refer to the *DPDK Getting Started Guide* for general information on running applications
+and the Environment Abstraction Layer (EAL) options.
+
+Explanation
+-----------
+
+Handle VF link reset event
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In main function, when initialising each port, register a callback for reset
+event.
+
+.. code-block:: c
+
+ /* Initialise each port */
+ for (portid = 0; portid < nb_ports; portid++) {
+ ......
+ /* register reset interrupt callback */
+ rte_eth_dev_callback_register(portid,
+ RTE_ETH_EVENT_INTR_RESET, reset_event_callback, NULL);
+ ......
+ }
+
+The callback function *reset_event_callback* will be executed in the
+interruption thread. But we want the event to be handled in the management
+thread. So in the callback function only a reset flag *stop_forwarding* is set.
+
+.. code-block:: c
+
+ static void
+ reset_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
+ {
+ RTE_SET_USED(param);
+
+ printf("\n\nIn registered callback...\n");
+ printf("Event type: %s on port %d\n",
+ type == RTE_ETH_EVENT_INTR_RESET ? "RESET interrupt" :
+ "unknown event", port_id);
+ reset_port = port_id;
+ rte_compiler_barrier(); /* prevent compiler reordering */
+ stop_forwarding = 1;
+ }
+
+The management thread keeps checking the reset flag *stop_forwarding* to see
+if VF port reset is needed. If so, it should call the API *rte_eth_dev_reset*
+to reset VF port. After that, the traffic will recover.
+
+.. code-block:: c
+
+ while (1) {
+ rte_delay_ms(1000);
+ printf("..");
+ if (stop_forwarding == 1) {
+ printf("\nreset\n");
+ rte_eth_dev_reset(reset_port);
+ stop_forwarding = 0;
+ }
+ if (force_quit)
+ break;
+ }
diff --git a/examples/link_reset/Makefile b/examples/link_reset/Makefile
new file mode 100644
index 0000000..6a63256
--- /dev/null
+++ b/examples/link_reset/Makefile
@@ -0,0 +1,50 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overridden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = link_reset
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/link_reset/main.c b/examples/link_reset/main.c
new file mode 100644
index 0000000..f151a83
--- /dev/null
+++ b/examples/link_reset/main.c
@@ -0,0 +1,769 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <netinet/in.h>
+#include <setjmp.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+#include <stdbool.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+
+static volatile bool force_quit;
+
+#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
+
+#define NB_MBUF 8192
+
+#define MAX_PKT_BURST 32
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 128
+#define RTE_TEST_TX_DESC_DEFAULT 512
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
+/* ethernet addresses of ports */
+static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* mask of enabled ports */
+static uint32_t l2fwd_enabled_port_mask;
+
+/* list of enabled ports */
+static uint32_t l2fwd_dst_ports[RTE_MAX_ETHPORTS];
+
+static unsigned int l2fwd_rx_queue_per_lcore = 1;
+
+#define MAX_RX_QUEUE_PER_LCORE 16
+#define MAX_TX_QUEUE_PER_PORT 16
+struct lcore_queue_conf {
+ unsigned n_rx_port;
+ unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
+} __rte_cache_aligned;
+struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
+
+static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
+
+static const struct rte_eth_conf port_conf = {
+ .rxmode = {
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .lock_mode = 1, /**< Use lock mode in RX */
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ .lock_mode = 1, /**< Use lock mode in TX */
+ },
+};
+
+struct rte_mempool *l2fwd_pktmbuf_pool;
+
+/* Per-port statistics struct */
+struct l2fwd_port_statistics {
+ uint64_t tx;
+ uint64_t rx;
+ uint64_t dropped;
+} __rte_cache_aligned;
+struct l2fwd_port_statistics port_statistics[RTE_MAX_ETHPORTS];
+
+/* A tsc-based timer responsible for triggering statistics printout */
+#define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
+#define MAX_TIMER_PERIOD 86400 /* 1 day max */
+/* default period is 10 seconds */
+static int64_t timer_period = 10 * TIMER_MILLISECOND * 1000;
+
+static uint32_t stop_forwarding;
+static uint8_t reset_port;
+
+/* Print out statistics on packets dropped */
+static void
+print_stats(void)
+{
+ uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
+ unsigned portid;
+
+ total_packets_dropped = 0;
+ total_packets_tx = 0;
+ total_packets_rx = 0;
+
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, topLeft);
+
+ printf("\nPort statistics ====================================");
+
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+ /* skip disabled ports */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("\nStatistics for port %u ------------------------------"
+ "\nPackets sent: %24"PRIu64
+ "\nPackets received: %20"PRIu64
+ "\nPackets dropped: %21"PRIu64,
+ portid,
+ port_statistics[portid].tx,
+ port_statistics[portid].rx,
+ port_statistics[portid].dropped);
+
+ total_packets_dropped += port_statistics[portid].dropped;
+ total_packets_tx += port_statistics[portid].tx;
+ total_packets_rx += port_statistics[portid].rx;
+ }
+ printf("\nAggregate statistics ==============================="
+ "\nTotal packets sent: %18"PRIu64
+ "\nTotal packets received: %14"PRIu64
+ "\nTotal packets dropped: %15"PRIu64,
+ total_packets_tx,
+ total_packets_rx,
+ total_packets_dropped);
+ printf("\n====================================================\n");
+}
+
+static void
+l2fwd_simple_forward(struct rte_mbuf *m, unsigned portid)
+{
+ struct ether_hdr *eth;
+ void *tmp;
+ unsigned dst_port;
+ int sent;
+ struct rte_eth_dev_tx_buffer *buffer;
+
+ dst_port = l2fwd_dst_ports[portid];
+ eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ /* 02:00:00:00:00:xx */
+ tmp = ð->d_addr.addr_bytes[0];
+ *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
+
+ /* src addr */
+ ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], ð->s_addr);
+
+ buffer = tx_buffer[dst_port];
+ sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
+ if (sent)
+ port_statistics[dst_port].tx += sent;
+}
+
+/* main processing loop */
+static void
+l2fwd_main_loop(void)
+{
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *m;
+ int sent;
+ unsigned lcore_id;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
+ unsigned i, j, portid, nb_rx;
+ struct lcore_queue_conf *qconf;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
+ US_PER_S * BURST_TX_DRAIN_US;
+ struct rte_eth_dev_tx_buffer *buffer;
+
+ prev_tsc = 0;
+ timer_tsc = 0;
+
+ lcore_id = rte_lcore_id();
+ qconf = &lcore_queue_conf[lcore_id];
+
+ if (qconf->n_rx_port == 0) {
+ RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
+ return;
+ }
+
+ RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
+
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ portid = qconf->rx_port_list[i];
+ RTE_LOG(INFO, L2FWD, " -- lcoreid=%u portid=%u\n", lcore_id,
+ portid);
+
+ }
+
+ while (!force_quit) {
+
+ cur_tsc = rte_rdtsc();
+
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ for (i = 0; i < qconf->n_rx_port; i++) {
+ portid =
+ l2fwd_dst_ports[qconf->rx_port_list[i]];
+ buffer = tx_buffer[portid];
+
+ sent = rte_eth_tx_buffer_flush(portid,
+ 0,
+ buffer);
+ if (sent)
+ port_statistics[portid].tx += sent;
+ }
+
+ /* if timer is enabled */
+ if (timer_period > 0) {
+
+ /* advance the timer */
+ timer_tsc += diff_tsc;
+
+ /* if timer has reached its timeout */
+ if (unlikely(timer_tsc >=
+ (uint64_t) timer_period)) {
+ /* do this only on master core */
+ if (lcore_id ==
+ rte_get_master_lcore()) {
+ print_stats();
+ /* reset the timer */
+ timer_tsc = 0;
+ }
+ }
+ }
+
+ prev_tsc = cur_tsc;
+ }
+
+ /*
+ * Read packet from RX queues
+ */
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ portid = qconf->rx_port_list[i];
+ nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
+ pkts_burst, MAX_PKT_BURST);
+
+ port_statistics[portid].rx += nb_rx;
+
+ for (j = 0; j < nb_rx; j++) {
+ m = pkts_burst[j];
+ rte_prefetch0(rte_pktmbuf_mtod(m, void *));
+ l2fwd_simple_forward(m, portid);
+ }
+ }
+ }
+}
+
+static int
+l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
+{
+ l2fwd_main_loop();
+ return 0;
+}
+
+/* display usage */
+static void
+l2fwd_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+ " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
+ prgname);
+}
+
+static int
+l2fwd_parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+static unsigned int
+l2fwd_parse_nqueue(const char *q_arg)
+{
+ char *end = NULL;
+ unsigned long n;
+
+ /* parse hexadecimal string */
+ n = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return 0;
+ if (n == 0)
+ return 0;
+ if (n >= MAX_RX_QUEUE_PER_LCORE)
+ return 0;
+
+ return n;
+}
+
+static int
+l2fwd_parse_timer_period(const char *q_arg)
+{
+ char *end = NULL;
+ int n;
+
+ /* parse number string */
+ n = strtol(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+ if (n >= MAX_TIMER_PERIOD)
+ return -1;
+
+ return n;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+l2fwd_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ char **argvopt;
+ int option_index;
+ char *prgname = argv[0];
+ static struct option lgopts[] = {
+ {NULL, 0, 0, 0}
+ };
+
+ argvopt = argv;
+
+ while ((opt = getopt_long(argc, argvopt, "p:q:T:",
+ lgopts, &option_index)) != EOF) {
+
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ l2fwd_enabled_port_mask = l2fwd_parse_portmask(optarg);
+ if (l2fwd_enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* nqueue */
+ case 'q':
+ l2fwd_rx_queue_per_lcore = l2fwd_parse_nqueue(optarg);
+ if (l2fwd_rx_queue_per_lcore == 0) {
+ printf("invalid queue number\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* timer period */
+ case 'T':
+ timer_period = l2fwd_parse_timer_period(optarg) *
+ 1000 * TIMER_MILLISECOND;
+ if (timer_period < 0) {
+ printf("invalid timer period\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* long options */
+ case 0:
+ l2fwd_usage(prgname);
+ return -1;
+
+ default:
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ }
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 0; /* reset getopt lib */
+ return ret;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint8_t portid, count, all_ports_up, print_flag = 0;
+ struct rte_eth_link link;
+
+ printf("\nChecking link status");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ if (force_quit)
+ return;
+ all_ports_up = 1;
+ for (portid = 0; portid < port_num; portid++) {
+ if (force_quit)
+ return;
+ if ((port_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ rte_eth_link_get_nowait(portid, &link);
+ /* print link status if flag set */
+ if (print_flag == 1) {
+ if (link.link_status)
+ printf("Port %d Link Up - speed %u "
+ "Mbps - %s\n", (uint8_t)portid,
+ (unsigned)link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex\n"));
+ else
+ printf("Port %d Link Down\n",
+ (uint8_t)portid);
+ continue;
+ }
+ /* clear all_ports_up flag if any link down */
+ if (link.link_status == ETH_LINK_DOWN) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* after finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
+
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("done\n");
+ }
+ }
+}
+
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
+static void
+reset_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
+{
+ RTE_SET_USED(param);
+
+ printf("\n\nIn registered callback...\n");
+ printf("Event type: %s on port %d\n",
+ type == RTE_ETH_EVENT_INTR_RESET ? "RESET interrupt" :
+ "unknown event", port_id);
+ reset_port = port_id;
+ rte_compiler_barrier(); /* prevent compiler reordering */
+ stop_forwarding = 1;
+}
+
+int
+main(int argc, char **argv)
+{
+ struct lcore_queue_conf *qconf;
+ struct rte_eth_dev_info dev_info;
+ int ret;
+ uint8_t nb_ports;
+ uint8_t nb_ports_available;
+ uint8_t portid, last_port;
+ unsigned lcore_id, rx_lcore_id;
+ unsigned nb_ports_in_mask = 0;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
+ argc -= ret;
+ argv += ret;
+
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* parse application arguments (after the EAL ones) */
+ ret = l2fwd_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
+
+ /* create the mbuf pool */
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+ if (l2fwd_pktmbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports == 0)
+ rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
+
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /* reset l2fwd_dst_ports */
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
+ l2fwd_dst_ports[portid] = 0;
+ last_port = 0;
+
+ /*
+ * Each logical core is assigned a dedicated TX queue on each port.
+ */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ if (nb_ports_in_mask % 2) {
+ l2fwd_dst_ports[portid] = last_port;
+ l2fwd_dst_ports[last_port] = portid;
+ } else
+ last_port = portid;
+
+ nb_ports_in_mask++;
+
+ rte_eth_dev_info_get(portid, &dev_info);
+ }
+ if (nb_ports_in_mask % 2) {
+ printf("Notice: odd number of ports in portmask.\n");
+ l2fwd_dst_ports[last_port] = last_port;
+ }
+
+ rx_lcore_id = 1;
+ qconf = NULL;
+
+ /* Initialize the port/queue configuration of each logical core */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ /* get the lcore_id for this port */
+ while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
+ lcore_queue_conf[rx_lcore_id].n_rx_port ==
+ l2fwd_rx_queue_per_lcore) {
+ rx_lcore_id++;
+ if (rx_lcore_id >= RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE, "Not enough cores\n");
+ }
+
+ if (qconf != &lcore_queue_conf[rx_lcore_id])
+ /* Assigned a new logical core in the loop above. */
+ qconf = &lcore_queue_conf[rx_lcore_id];
+
+ qconf->rx_port_list[qconf->n_rx_port] = portid;
+ qconf->n_rx_port++;
+ printf("Lcore %u: RX port %u\n",
+ rx_lcore_id,
+ (unsigned) portid);
+ }
+
+ nb_ports_available = nb_ports;
+
+ /* Initialise each port */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
+ printf("Skipping disabled port %u\n",
+ (unsigned) portid);
+ nb_ports_available--;
+ continue;
+ }
+ /* init port */
+ printf("Initializing port %u... ", (unsigned) portid);
+ fflush(stdout);
+ ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot configure device: err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ /* register reset interrupt callback */
+ rte_eth_dev_callback_register(portid,
+ RTE_ETH_EVENT_INTR_RESET, reset_event_callback, NULL);
+
+ rte_eth_macaddr_get(portid, &l2fwd_ports_eth_addr[portid]);
+
+ /* init one RX queue */
+ fflush(stdout);
+ ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
+ rte_eth_dev_socket_id(portid),
+ NULL,
+ l2fwd_pktmbuf_pool);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_rx_queue_setup:err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ /* init one TX queue on each port */
+ fflush(stdout);
+ ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
+ rte_eth_dev_socket_id(portid),
+ NULL);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_tx_queue_setup:err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ /* Initialize TX buffers */
+ tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
+ RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
+ rte_eth_dev_socket_id(portid));
+ if (tx_buffer[portid] == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Cannot allocate buffer for tx on port %u\n",
+ (unsigned) portid);
+
+ rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
+
+ ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
+ rte_eth_tx_buffer_count_callback,
+ &port_statistics[portid].dropped);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Cannot set error callback for "
+ "tx buffer on port %u\n", (unsigned) portid);
+
+ /* Start device */
+ ret = rte_eth_dev_start(portid);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_start:err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ printf("done:\n");
+
+ rte_eth_promiscuous_enable(portid);
+
+ printf("Port %u, MAC address: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n\n",
+ (unsigned) portid,
+ l2fwd_ports_eth_addr[portid].addr_bytes[0],
+ l2fwd_ports_eth_addr[portid].addr_bytes[1],
+ l2fwd_ports_eth_addr[portid].addr_bytes[2],
+ l2fwd_ports_eth_addr[portid].addr_bytes[3],
+ l2fwd_ports_eth_addr[portid].addr_bytes[4],
+ l2fwd_ports_eth_addr[portid].addr_bytes[5]);
+
+ /* initialize port stats */
+ memset(&port_statistics, 0, sizeof(port_statistics));
+ }
+
+ if (!nb_ports_available) {
+ rte_exit(EXIT_FAILURE,
+ "All available ports are disabled. Please set portmask.\n");
+ }
+
+ check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+
+ ret = 0;
+ /* launch per-lcore init on every lcore */
+ rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, SKIP_MASTER);
+
+ printf("\nwaiting..");
+ while (1) {
+ rte_delay_ms(1000);
+ printf("..");
+ if (stop_forwarding == 1) {
+ printf("\nreset\n");
+ rte_eth_dev_reset(reset_port);
+ stop_forwarding = 0;
+ }
+ if (force_quit)
+ break;
+ }
+
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ if (rte_eal_wait_lcore(lcore_id) < 0) {
+ ret = -1;
+ break;
+ }
+ }
+
+ for (portid = 0; portid < nb_ports; portid++) {
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("Closing port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+
+ return ret;
+}
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] examples: add a new example for link reset
2016-06-06 5:48 ` [PATCH] examples: add a new example for " Wenzhuo Lu
@ 2016-06-08 0:25 ` Ananyev, Konstantin
2016-06-08 7:24 ` Lu, Wenzhuo
0 siblings, 1 reply; 7+ messages in thread
From: Ananyev, Konstantin @ 2016-06-08 0:25 UTC (permalink / raw)
To: Lu, Wenzhuo, dev; +Cc: Lu, Wenzhuo
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Monday, June 06, 2016 6:48 AM
> To: dev@dpdk.org
> Cc: Lu, Wenzhuo
> Subject: [dpdk-dev] [PATCH] examples: add a new example for link reset
>
> Add a new example to show when the PF is down and up,
> VF port can be reset and recover.
Do we really need a totally new example for it?
Can't we put it in one of already existing ones?
Let say we have l3fwd-vf... wouldn't that suit your needs?
Konstantin
>
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
> ---
> MAINTAINERS | 4 +
> doc/guides/sample_app_ug/link_reset.rst | 177 ++++++++
> examples/link_reset/Makefile | 50 +++
> examples/link_reset/main.c | 769 ++++++++++++++++++++++++++++++++
> 4 files changed, 1000 insertions(+)
> create mode 100644 doc/guides/sample_app_ug/link_reset.rst
> create mode 100644 examples/link_reset/Makefile
> create mode 100644 examples/link_reset/main.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3e8558f..76879c3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -650,3 +650,7 @@ F: examples/tep_termination/
> F: examples/vmdq/
> F: examples/vmdq_dcb/
> F: doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
> +
> +M: Wenzhuo Lu <wenzhuo.lu@intel.com>
> +F: examples/link_reset/
> +F: doc/guides/sample_app_ug/link_reset.rst
> diff --git a/doc/guides/sample_app_ug/link_reset.rst b/doc/guides/sample_app_ug/link_reset.rst
> new file mode 100644
> index 0000000..fecae6d
> --- /dev/null
> +++ b/doc/guides/sample_app_ug/link_reset.rst
> @@ -0,0 +1,177 @@
> +.. BSD LICENSE
> + Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + * Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> + * Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> + * Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +Link Reset Sample Application (in Virtualized Environments)
> +===========================================================
> +
> +The Link Reset sample application is a simple example of VF traffic recovery
> +using the Data Plane Development Kit (DPDK) which also takes advantage of Single
> +Root I/O Virtualization (SR-IOV) features in a virtualized environment.
> +
> +Overview
> +--------
> +
> +The Link Reset sample application, which should operate in virtualized
> +environments, performs L2 forwarding for each packet that is received on an
> +RX_PORT.
> +This example is extended from the L2 forwarding example. Please reference the
> +example of L2 forwarding in virtualized environments for more details and
> +explanation about the behavior of forwarding and how to setup the test.
> +The purpose of this example is to show when the PF port is down and up, the VF
> +port can recover and the traffic can recover too.
> +
> +Virtual Function Setup Instructions
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +This application can use the virtual function available in the system and
> +therefore can be used in a virtual machine without passing through
> +the whole Network Device into a guest machine in a virtualized scenario.
> +The virtual functions can be enabled in the host machine or the hypervisor
> +with the respective physical function driver.
> +
> +For example, in a Linux* host machine, it is possible to enable a virtual
> +function using the following command:
> +
> +.. code-block:: console
> +
> + modprobe ixgbe max_vfs=2,2
> +
> +This command enables two Virtual Functions on each of Physical Function of the
> +NIC, with two physical ports in the PCI configuration space.
> +It is important to note that enabled Virtual Function 0 and 2 would belong to
> +Physical Function 0 and Virtual Function 1 and 3 would belong to Physical
> +Function 1, in this case enabling a total of four Virtual Functions.
> +
> +Compiling the Application
> +-------------------------
> +
> +#. Go to the example directory:
> +
> + .. code-block:: console
> +
> + export RTE_SDK=/path/to/rte_sdk
> + cd ${RTE_SDK}/examples/link_reset
> +
> +#. Set the target (a default target is used if not specified). For example:
> +
> + .. code-block:: console
> +
> + export RTE_TARGET=x86_64-native-linuxapp-gcc
> +
> + *See the DPDK Getting Started Guide* for possible RTE_TARGET values.
> +
> +#. Build the application:
> +
> + .. code-block:: console
> +
> + make
> +
> +Running the Application
> +-----------------------
> +
> +The application requires a number of command line options:
> +
> +.. code-block:: console
> +
> + ./build/link_reset [EAL options] -- -p PORTMASK [-q NQ]
> +
> +where,
> +
> +* p PORTMASK: A hexadecimal bitmask of the ports to configure
> +
> +* q NQ: A number of queues (=ports) per lcore (default is 1)
> +
> +To run the application in linuxapp environment with 4 lcores, 16 ports and 8 RX
> +queues per lcore, issue the command:
> +
> +.. code-block:: console
> +
> + $ ./build/link_reset -c f -n 4 -- -q 8 -p ffff
> +
> +Refer to the *DPDK Getting Started Guide* for general information on running applications
> +and the Environment Abstraction Layer (EAL) options.
> +
> +Explanation
> +-----------
> +
> +Handle VF link reset event
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +In main function, when initialising each port, register a callback for reset
> +event.
> +
> +.. code-block:: c
> +
> + /* Initialise each port */
> + for (portid = 0; portid < nb_ports; portid++) {
> + ......
> + /* register reset interrupt callback */
> + rte_eth_dev_callback_register(portid,
> + RTE_ETH_EVENT_INTR_RESET, reset_event_callback, NULL);
> + ......
> + }
> +
> +The callback function *reset_event_callback* will be executed in the
> +interruption thread. But we want the event to be handled in the management
> +thread. So in the callback function only a reset flag *stop_forwarding* is set.
> +
> +.. code-block:: c
> +
> + static void
> + reset_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
> + {
> + RTE_SET_USED(param);
> +
> + printf("\n\nIn registered callback...\n");
> + printf("Event type: %s on port %d\n",
> + type == RTE_ETH_EVENT_INTR_RESET ? "RESET interrupt" :
> + "unknown event", port_id);
> + reset_port = port_id;
> + rte_compiler_barrier(); /* prevent compiler reordering */
> + stop_forwarding = 1;
> + }
> +
> +The management thread keeps checking the reset flag *stop_forwarding* to see
> +if VF port reset is needed. If so, it should call the API *rte_eth_dev_reset*
> +to reset VF port. After that, the traffic will recover.
> +
> +.. code-block:: c
> +
> + while (1) {
> + rte_delay_ms(1000);
> + printf("..");
> + if (stop_forwarding == 1) {
> + printf("\nreset\n");
> + rte_eth_dev_reset(reset_port);
> + stop_forwarding = 0;
> + }
> + if (force_quit)
> + break;
> + }
> diff --git a/examples/link_reset/Makefile b/examples/link_reset/Makefile
> new file mode 100644
> index 0000000..6a63256
> --- /dev/null
> +++ b/examples/link_reset/Makefile
> @@ -0,0 +1,50 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +ifeq ($(RTE_SDK),)
> +$(error "Please define RTE_SDK environment variable")
> +endif
> +
> +# Default target, can be overridden by command line or environment
> +RTE_TARGET ?= x86_64-native-linuxapp-gcc
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# binary name
> +APP = link_reset
> +
> +# all source are stored in SRCS-y
> +SRCS-y := main.c
> +
> +CFLAGS += -O3
> +CFLAGS += $(WERROR_FLAGS)
> +
> +include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/link_reset/main.c b/examples/link_reset/main.c
> new file mode 100644
> index 0000000..f151a83
> --- /dev/null
> +++ b/examples/link_reset/main.c
> @@ -0,0 +1,769 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <stdint.h>
> +#include <inttypes.h>
> +#include <sys/types.h>
> +#include <sys/queue.h>
> +#include <netinet/in.h>
> +#include <setjmp.h>
> +#include <stdarg.h>
> +#include <ctype.h>
> +#include <errno.h>
> +#include <getopt.h>
> +#include <signal.h>
> +#include <stdbool.h>
> +
> +#include <rte_common.h>
> +#include <rte_log.h>
> +#include <rte_malloc.h>
> +#include <rte_memory.h>
> +#include <rte_memcpy.h>
> +#include <rte_memzone.h>
> +#include <rte_eal.h>
> +#include <rte_per_lcore.h>
> +#include <rte_launch.h>
> +#include <rte_atomic.h>
> +#include <rte_cycles.h>
> +#include <rte_prefetch.h>
> +#include <rte_lcore.h>
> +#include <rte_per_lcore.h>
> +#include <rte_branch_prediction.h>
> +#include <rte_interrupts.h>
> +#include <rte_pci.h>
> +#include <rte_random.h>
> +#include <rte_debug.h>
> +#include <rte_ether.h>
> +#include <rte_ethdev.h>
> +#include <rte_ring.h>
> +#include <rte_mempool.h>
> +#include <rte_mbuf.h>
> +
> +static volatile bool force_quit;
> +
> +#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
> +
> +#define NB_MBUF 8192
> +
> +#define MAX_PKT_BURST 32
> +#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
> +
> +/*
> + * Configurable number of RX/TX ring descriptors
> + */
> +#define RTE_TEST_RX_DESC_DEFAULT 128
> +#define RTE_TEST_TX_DESC_DEFAULT 512
> +static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
> +static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
> +
> +/* ethernet addresses of ports */
> +static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
> +
> +/* mask of enabled ports */
> +static uint32_t l2fwd_enabled_port_mask;
> +
> +/* list of enabled ports */
> +static uint32_t l2fwd_dst_ports[RTE_MAX_ETHPORTS];
> +
> +static unsigned int l2fwd_rx_queue_per_lcore = 1;
> +
> +#define MAX_RX_QUEUE_PER_LCORE 16
> +#define MAX_TX_QUEUE_PER_PORT 16
> +struct lcore_queue_conf {
> + unsigned n_rx_port;
> + unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
> +} __rte_cache_aligned;
> +struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
> +
> +static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
> +
> +static const struct rte_eth_conf port_conf = {
> + .rxmode = {
> + .split_hdr_size = 0,
> + .header_split = 0, /**< Header Split disabled */
> + .hw_ip_checksum = 0, /**< IP checksum offload disabled */
> + .hw_vlan_filter = 0, /**< VLAN filtering disabled */
> + .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
> + .hw_strip_crc = 0, /**< CRC stripped by hardware */
> + .lock_mode = 1, /**< Use lock mode in RX */
> + },
> + .txmode = {
> + .mq_mode = ETH_MQ_TX_NONE,
> + .lock_mode = 1, /**< Use lock mode in TX */
> + },
> +};
> +
> +struct rte_mempool *l2fwd_pktmbuf_pool;
> +
> +/* Per-port statistics struct */
> +struct l2fwd_port_statistics {
> + uint64_t tx;
> + uint64_t rx;
> + uint64_t dropped;
> +} __rte_cache_aligned;
> +struct l2fwd_port_statistics port_statistics[RTE_MAX_ETHPORTS];
> +
> +/* A tsc-based timer responsible for triggering statistics printout */
> +#define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
> +#define MAX_TIMER_PERIOD 86400 /* 1 day max */
> +/* default period is 10 seconds */
> +static int64_t timer_period = 10 * TIMER_MILLISECOND * 1000;
> +
> +static uint32_t stop_forwarding;
> +static uint8_t reset_port;
> +
> +/* Print out statistics on packets dropped */
> +static void
> +print_stats(void)
> +{
> + uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
> + unsigned portid;
> +
> + total_packets_dropped = 0;
> + total_packets_tx = 0;
> + total_packets_rx = 0;
> +
> + const char clr[] = { 27, '[', '2', 'J', '\0' };
> + const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
> +
> + /* Clear screen and move to top left */
> + printf("%s%s", clr, topLeft);
> +
> + printf("\nPort statistics ====================================");
> +
> + for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
> + /* skip disabled ports */
> + if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
> + continue;
> + printf("\nStatistics for port %u ------------------------------"
> + "\nPackets sent: %24"PRIu64
> + "\nPackets received: %20"PRIu64
> + "\nPackets dropped: %21"PRIu64,
> + portid,
> + port_statistics[portid].tx,
> + port_statistics[portid].rx,
> + port_statistics[portid].dropped);
> +
> + total_packets_dropped += port_statistics[portid].dropped;
> + total_packets_tx += port_statistics[portid].tx;
> + total_packets_rx += port_statistics[portid].rx;
> + }
> + printf("\nAggregate statistics ==============================="
> + "\nTotal packets sent: %18"PRIu64
> + "\nTotal packets received: %14"PRIu64
> + "\nTotal packets dropped: %15"PRIu64,
> + total_packets_tx,
> + total_packets_rx,
> + total_packets_dropped);
> + printf("\n====================================================\n");
> +}
> +
> +static void
> +l2fwd_simple_forward(struct rte_mbuf *m, unsigned portid)
> +{
> + struct ether_hdr *eth;
> + void *tmp;
> + unsigned dst_port;
> + int sent;
> + struct rte_eth_dev_tx_buffer *buffer;
> +
> + dst_port = l2fwd_dst_ports[portid];
> + eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
> +
> + /* 02:00:00:00:00:xx */
> + tmp = ð->d_addr.addr_bytes[0];
> + *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
> +
> + /* src addr */
> + ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], ð->s_addr);
> +
> + buffer = tx_buffer[dst_port];
> + sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
> + if (sent)
> + port_statistics[dst_port].tx += sent;
> +}
> +
> +/* main processing loop */
> +static void
> +l2fwd_main_loop(void)
> +{
> + struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
> + struct rte_mbuf *m;
> + int sent;
> + unsigned lcore_id;
> + uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
> + unsigned i, j, portid, nb_rx;
> + struct lcore_queue_conf *qconf;
> + const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> + US_PER_S * BURST_TX_DRAIN_US;
> + struct rte_eth_dev_tx_buffer *buffer;
> +
> + prev_tsc = 0;
> + timer_tsc = 0;
> +
> + lcore_id = rte_lcore_id();
> + qconf = &lcore_queue_conf[lcore_id];
> +
> + if (qconf->n_rx_port == 0) {
> + RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
> + return;
> + }
> +
> + RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
> +
> + for (i = 0; i < qconf->n_rx_port; i++) {
> +
> + portid = qconf->rx_port_list[i];
> + RTE_LOG(INFO, L2FWD, " -- lcoreid=%u portid=%u\n", lcore_id,
> + portid);
> +
> + }
> +
> + while (!force_quit) {
> +
> + cur_tsc = rte_rdtsc();
> +
> + /*
> + * TX burst queue drain
> + */
> + diff_tsc = cur_tsc - prev_tsc;
> + if (unlikely(diff_tsc > drain_tsc)) {
> +
> + for (i = 0; i < qconf->n_rx_port; i++) {
> + portid =
> + l2fwd_dst_ports[qconf->rx_port_list[i]];
> + buffer = tx_buffer[portid];
> +
> + sent = rte_eth_tx_buffer_flush(portid,
> + 0,
> + buffer);
> + if (sent)
> + port_statistics[portid].tx += sent;
> + }
> +
> + /* if timer is enabled */
> + if (timer_period > 0) {
> +
> + /* advance the timer */
> + timer_tsc += diff_tsc;
> +
> + /* if timer has reached its timeout */
> + if (unlikely(timer_tsc >=
> + (uint64_t) timer_period)) {
> + /* do this only on master core */
> + if (lcore_id ==
> + rte_get_master_lcore()) {
> + print_stats();
> + /* reset the timer */
> + timer_tsc = 0;
> + }
> + }
> + }
> +
> + prev_tsc = cur_tsc;
> + }
> +
> + /*
> + * Read packet from RX queues
> + */
> + for (i = 0; i < qconf->n_rx_port; i++) {
> +
> + portid = qconf->rx_port_list[i];
> + nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
> + pkts_burst, MAX_PKT_BURST);
> +
> + port_statistics[portid].rx += nb_rx;
> +
> + for (j = 0; j < nb_rx; j++) {
> + m = pkts_burst[j];
> + rte_prefetch0(rte_pktmbuf_mtod(m, void *));
> + l2fwd_simple_forward(m, portid);
> + }
> + }
> + }
> +}
> +
> +static int
> +l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
> +{
> + l2fwd_main_loop();
> + return 0;
> +}
> +
> +/* display usage */
> +static void
> +l2fwd_usage(const char *prgname)
> +{
> + printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
> + " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
> + " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
> + " -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
> + prgname);
> +}
> +
> +static int
> +l2fwd_parse_portmask(const char *portmask)
> +{
> + char *end = NULL;
> + unsigned long pm;
> +
> + /* parse hexadecimal string */
> + pm = strtoul(portmask, &end, 16);
> + if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return -1;
> +
> + if (pm == 0)
> + return -1;
> +
> + return pm;
> +}
> +
> +static unsigned int
> +l2fwd_parse_nqueue(const char *q_arg)
> +{
> + char *end = NULL;
> + unsigned long n;
> +
> + /* parse hexadecimal string */
> + n = strtoul(q_arg, &end, 10);
> + if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return 0;
> + if (n == 0)
> + return 0;
> + if (n >= MAX_RX_QUEUE_PER_LCORE)
> + return 0;
> +
> + return n;
> +}
> +
> +static int
> +l2fwd_parse_timer_period(const char *q_arg)
> +{
> + char *end = NULL;
> + int n;
> +
> + /* parse number string */
> + n = strtol(q_arg, &end, 10);
> + if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return -1;
> + if (n >= MAX_TIMER_PERIOD)
> + return -1;
> +
> + return n;
> +}
> +
> +/* Parse the argument given in the command line of the application */
> +static int
> +l2fwd_parse_args(int argc, char **argv)
> +{
> + int opt, ret;
> + char **argvopt;
> + int option_index;
> + char *prgname = argv[0];
> + static struct option lgopts[] = {
> + {NULL, 0, 0, 0}
> + };
> +
> + argvopt = argv;
> +
> + while ((opt = getopt_long(argc, argvopt, "p:q:T:",
> + lgopts, &option_index)) != EOF) {
> +
> + switch (opt) {
> + /* portmask */
> + case 'p':
> + l2fwd_enabled_port_mask = l2fwd_parse_portmask(optarg);
> + if (l2fwd_enabled_port_mask == 0) {
> + printf("invalid portmask\n");
> + l2fwd_usage(prgname);
> + return -1;
> + }
> + break;
> +
> + /* nqueue */
> + case 'q':
> + l2fwd_rx_queue_per_lcore = l2fwd_parse_nqueue(optarg);
> + if (l2fwd_rx_queue_per_lcore == 0) {
> + printf("invalid queue number\n");
> + l2fwd_usage(prgname);
> + return -1;
> + }
> + break;
> +
> + /* timer period */
> + case 'T':
> + timer_period = l2fwd_parse_timer_period(optarg) *
> + 1000 * TIMER_MILLISECOND;
> + if (timer_period < 0) {
> + printf("invalid timer period\n");
> + l2fwd_usage(prgname);
> + return -1;
> + }
> + break;
> +
> + /* long options */
> + case 0:
> + l2fwd_usage(prgname);
> + return -1;
> +
> + default:
> + l2fwd_usage(prgname);
> + return -1;
> + }
> + }
> +
> + if (optind >= 0)
> + argv[optind-1] = prgname;
> +
> + ret = optind-1;
> + optind = 0; /* reset getopt lib */
> + return ret;
> +}
> +
> +/* Check the link status of all ports in up to 9s, and print them finally */
> +static void
> +check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
> +{
> +#define CHECK_INTERVAL 100 /* 100ms */
> +#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
> + uint8_t portid, count, all_ports_up, print_flag = 0;
> + struct rte_eth_link link;
> +
> + printf("\nChecking link status");
> + fflush(stdout);
> + for (count = 0; count <= MAX_CHECK_TIME; count++) {
> + if (force_quit)
> + return;
> + all_ports_up = 1;
> + for (portid = 0; portid < port_num; portid++) {
> + if (force_quit)
> + return;
> + if ((port_mask & (1 << portid)) == 0)
> + continue;
> + memset(&link, 0, sizeof(link));
> + rte_eth_link_get_nowait(portid, &link);
> + /* print link status if flag set */
> + if (print_flag == 1) {
> + if (link.link_status)
> + printf("Port %d Link Up - speed %u "
> + "Mbps - %s\n", (uint8_t)portid,
> + (unsigned)link.link_speed,
> + (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
> + ("full-duplex") : ("half-duplex\n"));
> + else
> + printf("Port %d Link Down\n",
> + (uint8_t)portid);
> + continue;
> + }
> + /* clear all_ports_up flag if any link down */
> + if (link.link_status == ETH_LINK_DOWN) {
> + all_ports_up = 0;
> + break;
> + }
> + }
> + /* after finally printing all link status, get out */
> + if (print_flag == 1)
> + break;
> +
> + if (all_ports_up == 0) {
> + printf(".");
> + fflush(stdout);
> + rte_delay_ms(CHECK_INTERVAL);
> + }
> +
> + /* set the print_flag if all ports up or timeout */
> + if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
> + print_flag = 1;
> + printf("done\n");
> + }
> + }
> +}
> +
> +static void
> +signal_handler(int signum)
> +{
> + if (signum == SIGINT || signum == SIGTERM) {
> + printf("\n\nSignal %d received, preparing to exit...\n",
> + signum);
> + force_quit = true;
> + }
> +}
> +
> +static void
> +reset_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
> +{
> + RTE_SET_USED(param);
> +
> + printf("\n\nIn registered callback...\n");
> + printf("Event type: %s on port %d\n",
> + type == RTE_ETH_EVENT_INTR_RESET ? "RESET interrupt" :
> + "unknown event", port_id);
> + reset_port = port_id;
> + rte_compiler_barrier(); /* prevent compiler reordering */
> + stop_forwarding = 1;
> +}
> +
> +int
> +main(int argc, char **argv)
> +{
> + struct lcore_queue_conf *qconf;
> + struct rte_eth_dev_info dev_info;
> + int ret;
> + uint8_t nb_ports;
> + uint8_t nb_ports_available;
> + uint8_t portid, last_port;
> + unsigned lcore_id, rx_lcore_id;
> + unsigned nb_ports_in_mask = 0;
> +
> + /* init EAL */
> + ret = rte_eal_init(argc, argv);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
> + argc -= ret;
> + argv += ret;
> +
> + force_quit = false;
> + signal(SIGINT, signal_handler);
> + signal(SIGTERM, signal_handler);
> +
> + /* parse application arguments (after the EAL ones) */
> + ret = l2fwd_parse_args(argc, argv);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
> +
> + /* create the mbuf pool */
> + l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
> + 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
> + if (l2fwd_pktmbuf_pool == NULL)
> + rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
> +
> + nb_ports = rte_eth_dev_count();
> + if (nb_ports == 0)
> + rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
> +
> + if (nb_ports > RTE_MAX_ETHPORTS)
> + nb_ports = RTE_MAX_ETHPORTS;
> +
> + /* reset l2fwd_dst_ports */
> + for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
> + l2fwd_dst_ports[portid] = 0;
> + last_port = 0;
> +
> + /*
> + * Each logical core is assigned a dedicated TX queue on each port.
> + */
> + for (portid = 0; portid < nb_ports; portid++) {
> + /* skip ports that are not enabled */
> + if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
> + continue;
> +
> + if (nb_ports_in_mask % 2) {
> + l2fwd_dst_ports[portid] = last_port;
> + l2fwd_dst_ports[last_port] = portid;
> + } else
> + last_port = portid;
> +
> + nb_ports_in_mask++;
> +
> + rte_eth_dev_info_get(portid, &dev_info);
> + }
> + if (nb_ports_in_mask % 2) {
> + printf("Notice: odd number of ports in portmask.\n");
> + l2fwd_dst_ports[last_port] = last_port;
> + }
> +
> + rx_lcore_id = 1;
> + qconf = NULL;
> +
> + /* Initialize the port/queue configuration of each logical core */
> + for (portid = 0; portid < nb_ports; portid++) {
> + /* skip ports that are not enabled */
> + if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
> + continue;
> +
> + /* get the lcore_id for this port */
> + while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
> + lcore_queue_conf[rx_lcore_id].n_rx_port ==
> + l2fwd_rx_queue_per_lcore) {
> + rx_lcore_id++;
> + if (rx_lcore_id >= RTE_MAX_LCORE)
> + rte_exit(EXIT_FAILURE, "Not enough cores\n");
> + }
> +
> + if (qconf != &lcore_queue_conf[rx_lcore_id])
> + /* Assigned a new logical core in the loop above. */
> + qconf = &lcore_queue_conf[rx_lcore_id];
> +
> + qconf->rx_port_list[qconf->n_rx_port] = portid;
> + qconf->n_rx_port++;
> + printf("Lcore %u: RX port %u\n",
> + rx_lcore_id,
> + (unsigned) portid);
> + }
> +
> + nb_ports_available = nb_ports;
> +
> + /* Initialise each port */
> + for (portid = 0; portid < nb_ports; portid++) {
> + /* skip ports that are not enabled */
> + if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
> + printf("Skipping disabled port %u\n",
> + (unsigned) portid);
> + nb_ports_available--;
> + continue;
> + }
> + /* init port */
> + printf("Initializing port %u... ", (unsigned) portid);
> + fflush(stdout);
> + ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE,
> + "Cannot configure device: err=%d, port=%u\n",
> + ret, (unsigned) portid);
> +
> + /* register reset interrupt callback */
> + rte_eth_dev_callback_register(portid,
> + RTE_ETH_EVENT_INTR_RESET, reset_event_callback, NULL);
> +
> + rte_eth_macaddr_get(portid, &l2fwd_ports_eth_addr[portid]);
> +
> + /* init one RX queue */
> + fflush(stdout);
> + ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
> + rte_eth_dev_socket_id(portid),
> + NULL,
> + l2fwd_pktmbuf_pool);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE,
> + "rte_eth_rx_queue_setup:err=%d, port=%u\n",
> + ret, (unsigned) portid);
> +
> + /* init one TX queue on each port */
> + fflush(stdout);
> + ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
> + rte_eth_dev_socket_id(portid),
> + NULL);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE,
> + "rte_eth_tx_queue_setup:err=%d, port=%u\n",
> + ret, (unsigned) portid);
> +
> + /* Initialize TX buffers */
> + tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
> + RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
> + rte_eth_dev_socket_id(portid));
> + if (tx_buffer[portid] == NULL)
> + rte_exit(EXIT_FAILURE,
> + "Cannot allocate buffer for tx on port %u\n",
> + (unsigned) portid);
> +
> + rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
> +
> + ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
> + rte_eth_tx_buffer_count_callback,
> + &port_statistics[portid].dropped);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE, "Cannot set error callback for "
> + "tx buffer on port %u\n", (unsigned) portid);
> +
> + /* Start device */
> + ret = rte_eth_dev_start(portid);
> + if (ret < 0)
> + rte_exit(EXIT_FAILURE,
> + "rte_eth_dev_start:err=%d, port=%u\n",
> + ret, (unsigned) portid);
> +
> + printf("done:\n");
> +
> + rte_eth_promiscuous_enable(portid);
> +
> + printf("Port %u, MAC address: "
> + "%02X:%02X:%02X:%02X:%02X:%02X\n\n",
> + (unsigned) portid,
> + l2fwd_ports_eth_addr[portid].addr_bytes[0],
> + l2fwd_ports_eth_addr[portid].addr_bytes[1],
> + l2fwd_ports_eth_addr[portid].addr_bytes[2],
> + l2fwd_ports_eth_addr[portid].addr_bytes[3],
> + l2fwd_ports_eth_addr[portid].addr_bytes[4],
> + l2fwd_ports_eth_addr[portid].addr_bytes[5]);
> +
> + /* initialize port stats */
> + memset(&port_statistics, 0, sizeof(port_statistics));
> + }
> +
> + if (!nb_ports_available) {
> + rte_exit(EXIT_FAILURE,
> + "All available ports are disabled. Please set portmask.\n");
> + }
> +
> + check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
> +
> + ret = 0;
> + /* launch per-lcore init on every lcore */
> + rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, SKIP_MASTER);
> +
> + printf("\nwaiting..");
> + while (1) {
> + rte_delay_ms(1000);
> + printf("..");
> + if (stop_forwarding == 1) {
> + printf("\nreset\n");
> + rte_eth_dev_reset(reset_port);
> + stop_forwarding = 0;
> + }
> + if (force_quit)
> + break;
> + }
> +
> + RTE_LCORE_FOREACH_SLAVE(lcore_id) {
> + if (rte_eal_wait_lcore(lcore_id) < 0) {
> + ret = -1;
> + break;
> + }
> + }
> +
> + for (portid = 0; portid < nb_ports; portid++) {
> + if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
> + continue;
> + printf("Closing port %d...", portid);
> + rte_eth_dev_stop(portid);
> + rte_eth_dev_close(portid);
> + printf(" Done\n");
> + }
> + printf("Bye...\n");
> +
> + return ret;
> +}
> --
> 1.9.3
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] examples: add a new example for link reset
2016-06-08 0:25 ` Ananyev, Konstantin
@ 2016-06-08 7:24 ` Lu, Wenzhuo
2016-06-08 8:37 ` Ananyev, Konstantin
0 siblings, 1 reply; 7+ messages in thread
From: Lu, Wenzhuo @ 2016-06-08 7:24 UTC (permalink / raw)
To: Ananyev, Konstantin, dev
Hi Konstantin,
> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Wednesday, June 8, 2016 8:25 AM
> To: Lu, Wenzhuo; dev@dpdk.org
> Cc: Lu, Wenzhuo
> Subject: RE: [dpdk-dev] [PATCH] examples: add a new example for link reset
>
>
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> > Sent: Monday, June 06, 2016 6:48 AM
> > To: dev@dpdk.org
> > Cc: Lu, Wenzhuo
> > Subject: [dpdk-dev] [PATCH] examples: add a new example for link reset
> >
> > Add a new example to show when the PF is down and up, VF port can be
> > reset and recover.
>
> Do we really need a totally new example for it?
> Can't we put it in one of already existing ones?
> Let say we have l3fwd-vf... wouldn't that suit your needs?
> Konstantin
I thought about just modifying an existing example. But I choose to add a new one at last. The benefit of a totally new example is we can make it simple enough and focus on the reset function.
So it's easier for the users to find what we want to show. And it's also easier for us as we don't need to care about if our modification will break some function of the original example :)
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] examples: add a new example for link reset
2016-06-08 7:24 ` Lu, Wenzhuo
@ 2016-06-08 8:37 ` Ananyev, Konstantin
2016-06-08 9:00 ` Thomas Monjalon
0 siblings, 1 reply; 7+ messages in thread
From: Ananyev, Konstantin @ 2016-06-08 8:37 UTC (permalink / raw)
To: Lu, Wenzhuo, dev
Hi Wenzhuo,
> Hi Konstantin,
>
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Wednesday, June 8, 2016 8:25 AM
> > To: Lu, Wenzhuo; dev@dpdk.org
> > Cc: Lu, Wenzhuo
> > Subject: RE: [dpdk-dev] [PATCH] examples: add a new example for link reset
> >
> >
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> > > Sent: Monday, June 06, 2016 6:48 AM
> > > To: dev@dpdk.org
> > > Cc: Lu, Wenzhuo
> > > Subject: [dpdk-dev] [PATCH] examples: add a new example for link reset
> > >
> > > Add a new example to show when the PF is down and up, VF port can be
> > > reset and recover.
> >
> > Do we really need a totally new example for it?
> > Can't we put it in one of already existing ones?
> > Let say we have l3fwd-vf... wouldn't that suit your needs?
> > Konstantin
> I thought about just modifying an existing example. But I choose to add a new one at last. The benefit of a totally new example is we
> can make it simple enough and focus on the reset function.
> So it's easier for the users to find what we want to show. And it's also easier for us as we don't need to care about if our modification
> will break some function of the original example :)
I still think that adding a new example for esch new feature/function in rte_ethdev API iw way too expensive.
If your change is not good enough and will break original example, then you probably re-work your feature patch
to make it stable enough.
After all people will use it in their existing apps, not write the new ones right?
BTW, why not make it work with testpmd?
After all it is a new PMD api, an that's for we have our testpmd here?
Konstantin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] examples: add a new example for link reset
2016-06-08 8:37 ` Ananyev, Konstantin
@ 2016-06-08 9:00 ` Thomas Monjalon
2016-06-12 0:56 ` Lu, Wenzhuo
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Monjalon @ 2016-06-08 9:00 UTC (permalink / raw)
To: Ananyev, Konstantin, Lu, Wenzhuo; +Cc: dev
2016-06-08 08:37, Ananyev, Konstantin:
> > From: Ananyev, Konstantin
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> > > > Add a new example to show when the PF is down and up, VF port can be
> > > > reset and recover.
> > >
> > > Do we really need a totally new example for it?
> > > Can't we put it in one of already existing ones?
> > > Let say we have l3fwd-vf... wouldn't that suit your needs?
> > > Konstantin
> > I thought about just modifying an existing example. But I choose to add a new one at last. The benefit of a totally new example is we
> > can make it simple enough and focus on the reset function.
> > So it's easier for the users to find what we want to show. And it's also easier for us as we don't need to care about if our modification
> > will break some function of the original example :)
>
> I still think that adding a new example for esch new feature/function in rte_ethdev API iw way too expensive.
> If your change is not good enough and will break original example, then you probably re-work your feature patch
> to make it stable enough.
> After all people will use it in their existing apps, not write the new ones right?
> BTW, why not make it work with testpmd?
> After all it is a new PMD api, an that's for we have our testpmd here?
+1 for testpmd
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] examples: add a new example for link reset
2016-06-08 9:00 ` Thomas Monjalon
@ 2016-06-12 0:56 ` Lu, Wenzhuo
0 siblings, 0 replies; 7+ messages in thread
From: Lu, Wenzhuo @ 2016-06-12 0:56 UTC (permalink / raw)
To: Thomas Monjalon, Ananyev, Konstantin; +Cc: dev
Hi Konstantin, Thomas,
> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> Sent: Wednesday, June 8, 2016 5:00 PM
> To: Ananyev, Konstantin; Lu, Wenzhuo
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] examples: add a new example for link reset
>
> 2016-06-08 08:37, Ananyev, Konstantin:
> > > From: Ananyev, Konstantin
> > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> > > > > Add a new example to show when the PF is down and up, VF port
> > > > > can be reset and recover.
> > > >
> > > > Do we really need a totally new example for it?
> > > > Can't we put it in one of already existing ones?
> > > > Let say we have l3fwd-vf... wouldn't that suit your needs?
> > > > Konstantin
> > > I thought about just modifying an existing example. But I choose to
> > > add a new one at last. The benefit of a totally new example is we can make it
> simple enough and focus on the reset function.
> > > So it's easier for the users to find what we want to show. And it's
> > > also easier for us as we don't need to care about if our
> > > modification will break some function of the original example :)
> >
> > I still think that adding a new example for esch new feature/function in
> rte_ethdev API iw way too expensive.
> > If your change is not good enough and will break original example,
> > then you probably re-work your feature patch to make it stable enough.
> > After all people will use it in their existing apps, not write the new ones right?
> > BTW, why not make it work with testpmd?
> > After all it is a new PMD api, an that's for we have our testpmd here?
>
> +1 for testpmd
I may not make myself clear. I said "function" but actually I mainly mean the performance impact but not the functionality. As we know l2fwd and l3fwd can be used to show the performance of DPDK, adding lock will break this function, showing the performance data. That's why I don't want to touch l2fwd and l3fwd.
Agree that testpmd can be a choice. I'll try to modify testpmd, maybe add a parameter, like "testpmd --lock". So by default we will not use lock mode.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-06-12 0:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-06 5:48 [PATCH] an example for VF link reset Wenzhuo Lu
2016-06-06 5:48 ` [PATCH] examples: add a new example for " Wenzhuo Lu
2016-06-08 0:25 ` Ananyev, Konstantin
2016-06-08 7:24 ` Lu, Wenzhuo
2016-06-08 8:37 ` Ananyev, Konstantin
2016-06-08 9:00 ` Thomas Monjalon
2016-06-12 0:56 ` Lu, Wenzhuo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.