* [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
@ 2018-10-26 2:47 XiaoLi Feng
2018-11-04 16:15 ` Eryu Guan
0 siblings, 1 reply; 4+ messages in thread
From: XiaoLi Feng @ 2018-10-26 2:47 UTC (permalink / raw)
To: esandeen, jmoyer; +Cc: fstests, xzhou, xiaoli feng
From: xiaoli feng <xifeng@redhat.com>
This case is failed for dax 2MiB alignment test. When test "push past
the hard block limit" in this case, the quota bhard is 4000kb, and
try to create 4096kb in dax fs. dax only create 2048kb because of 2MiB
alignment. But there is a check that the file size must > 3400kb(bhard
* 85%). So there are two method to fix it. One is to decrease bhard
size. Second is to descreate minimum size. The minimum is hard to define.
So I choose first method.
---
tests/xfs/050 | 4 ++--
tests/xfs/050.out | 60 +++++++++++++++++++++++++++----------------------------
2 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/tests/xfs/050 b/tests/xfs/050
index 788ed7f..d2ca477 100755
--- a/tests/xfs/050
+++ b/tests/xfs/050
@@ -43,8 +43,8 @@ _scratch_mount
bsize=$(_get_file_block_size $SCRATCH_MNT)
_scratch_unmount
-bsoft=$(( 200 * $bsize ))
-bhard=$(( 1000 * $bsize ))
+bsoft=$(( 100 * $bsize ))
+bhard=$(( 500 * $bsize ))
isoft=4
ihard=10
diff --git a/tests/xfs/050.out b/tests/xfs/050.out
index 725cd79..6a7af1a 100644
--- a/tests/xfs/050.out
+++ b/tests/xfs/050.out
@@ -12,23 +12,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** unmount
*** group
@@ -44,23 +44,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** unmount
*** uqnoenforce
@@ -76,23 +76,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** unmount
*** gqnoenforce
@@ -108,23 +108,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** unmount
*** pquota
@@ -140,23 +140,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] =OK= 200 1000 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] =OK= 100 500 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
*** unmount
*** pqnoenforce
@@ -172,22 +172,22 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** unmount
--
1.8.3.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
2018-10-26 2:47 [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test XiaoLi Feng
@ 2018-11-04 16:15 ` Eryu Guan
2018-11-15 7:19 ` Xiaoli Feng
0 siblings, 1 reply; 4+ messages in thread
From: Eryu Guan @ 2018-11-04 16:15 UTC (permalink / raw)
To: XiaoLi Feng; +Cc: esandeen, jmoyer, fstests, xzhou, linux-xfs
On Fri, Oct 26, 2018 at 10:47:54AM +0800, Xiaoli Feng wrote:
> From: xiaoli feng <xifeng@redhat.com>
>
> This case is failed for dax 2MiB alignment test. When test "push past
> the hard block limit" in this case, the quota bhard is 4000kb, and
> try to create 4096kb in dax fs. dax only create 2048kb because of 2MiB
> alignment. But there is a check that the file size must > 3400kb(bhard
> * 85%). So there are two method to fix it. One is to decrease bhard
> size. Second is to descreate minimum size. The minimum is hard to define.
> So I choose first method.
Adding linux-xfs to cc list for review from xfs folks. Thanks a lot!
Eryu
> ---
> tests/xfs/050 | 4 ++--
> tests/xfs/050.out | 60 +++++++++++++++++++++++++++----------------------------
> 2 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/tests/xfs/050 b/tests/xfs/050
> index 788ed7f..d2ca477 100755
> --- a/tests/xfs/050
> +++ b/tests/xfs/050
> @@ -43,8 +43,8 @@ _scratch_mount
> bsize=$(_get_file_block_size $SCRATCH_MNT)
> _scratch_unmount
>
> -bsoft=$(( 200 * $bsize ))
> -bhard=$(( 1000 * $bsize ))
> +bsoft=$(( 100 * $bsize ))
> +bhard=$(( 500 * $bsize ))
> isoft=4
> ihard=10
>
> diff --git a/tests/xfs/050.out b/tests/xfs/050.out
> index 725cd79..6a7af1a 100644
> --- a/tests/xfs/050.out
> +++ b/tests/xfs/050.out
> @@ -12,23 +12,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
>
> *** report initial settings
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft inode limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the soft block limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the hard inode limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the hard block limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** unmount
> *** group
> @@ -44,23 +44,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
>
> *** report initial settings
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft inode limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the soft block limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the hard inode limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the hard block limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** unmount
> *** uqnoenforce
> @@ -76,23 +76,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
>
> *** report initial settings
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft inode limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft block limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the hard inode limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
>
> *** push past the hard block limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
>
> *** unmount
> *** gqnoenforce
> @@ -108,23 +108,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
>
> *** report initial settings
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft inode limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft block limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the hard inode limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
>
> *** push past the hard block limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
>
> *** unmount
> *** pquota
> @@ -140,23 +140,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
>
> *** report initial settings
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft inode limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the soft block limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the hard inode limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** push past the hard block limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] =OK= 200 1000 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> +[NAME] =OK= 100 500 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
>
> *** unmount
> *** pqnoenforce
> @@ -172,22 +172,22 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
>
> *** report initial settings
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft inode limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the soft block limit
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
>
> *** push past the hard inode limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
>
> *** push past the hard block limit (expect EDQUOT)
> [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
>
> *** unmount
> --
> 1.8.3.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
2018-11-04 16:15 ` Eryu Guan
@ 2018-11-15 7:19 ` Xiaoli Feng
2018-11-20 8:56 ` Chandan Rajendra
0 siblings, 1 reply; 4+ messages in thread
From: Xiaoli Feng @ 2018-11-15 7:19 UTC (permalink / raw)
To: Eryu Guan; +Cc: esandeen, jmoyer, fstests, xzhou, linux-xfs, chandan
Hello all,
Any thoughts for this patch? Adding chandan@linux.vnet.ibm.com to cc list for review.
Because his patch "xfs/050: work with 64k block size" change the bsoft and bhard size.
Thanks.
----- Original Message -----
> From: "Eryu Guan" <guaneryu@gmail.com>
> To: "XiaoLi Feng" <xifeng@redhat.com>
> Cc: esandeen@redhat.com, jmoyer@redhat.com, fstests@vger.kernel.org, xzhou@redhat.com, linux-xfs@vger.kernel.org
> Sent: Monday, November 5, 2018 12:15:54 AM
> Subject: Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
>
> On Fri, Oct 26, 2018 at 10:47:54AM +0800, Xiaoli Feng wrote:
> > From: xiaoli feng <xifeng@redhat.com>
> >
> > This case is failed for dax 2MiB alignment test. When test "push past
> > the hard block limit" in this case, the quota bhard is 4000kb, and
> > try to create 4096kb in dax fs. dax only create 2048kb because of 2MiB
> > alignment. But there is a check that the file size must > 3400kb(bhard
> > * 85%). So there are two method to fix it. One is to decrease bhard
> > size. Second is to descreate minimum size. The minimum is hard to define.
> > So I choose first method.
>
> Adding linux-xfs to cc list for review from xfs folks. Thanks a lot!
>
> Eryu
>
> > ---
> > tests/xfs/050 | 4 ++--
> > tests/xfs/050.out | 60
> > +++++++++++++++++++++++++++----------------------------
> > 2 files changed, 32 insertions(+), 32 deletions(-)
> >
> > diff --git a/tests/xfs/050 b/tests/xfs/050
> > index 788ed7f..d2ca477 100755
> > --- a/tests/xfs/050
> > +++ b/tests/xfs/050
> > @@ -43,8 +43,8 @@ _scratch_mount
> > bsize=$(_get_file_block_size $SCRATCH_MNT)
> > _scratch_unmount
> >
> > -bsoft=$(( 200 * $bsize ))
> > -bhard=$(( 1000 * $bsize ))
> > +bsoft=$(( 100 * $bsize ))
> > +bhard=$(( 500 * $bsize ))
> > isoft=4
> > ihard=10
> >
> > diff --git a/tests/xfs/050.out b/tests/xfs/050.out
> > index 725cd79..6a7af1a 100644
> > --- a/tests/xfs/050.out
> > +++ b/tests/xfs/050.out
> > @@ -12,23 +12,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >
> > *** report initial settings
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft inode limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the soft block limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the hard inode limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the hard block limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** unmount
> > *** group
> > @@ -44,23 +44,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >
> > *** report initial settings
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft inode limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the soft block limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the hard inode limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the hard block limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** unmount
> > *** uqnoenforce
> > @@ -76,23 +76,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >
> > *** report initial settings
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft inode limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft block limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the hard inode limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> >
> > *** push past the hard block limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> >
> > *** unmount
> > *** gqnoenforce
> > @@ -108,23 +108,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >
> > *** report initial settings
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft inode limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft block limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the hard inode limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> >
> > *** push past the hard block limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> >
> > *** unmount
> > *** pquota
> > @@ -140,23 +140,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >
> > *** report initial settings
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft inode limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the soft block limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the hard inode limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** push past the hard block limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] =OK= 200 1000 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] =OK= 100 500 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> >
> > *** unmount
> > *** pqnoenforce
> > @@ -172,22 +172,22 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >
> > *** report initial settings
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft inode limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the soft block limit
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> >
> > *** push past the hard inode limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> >
> > *** push past the hard block limit (expect EDQUOT)
> > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> >
> > *** unmount
> > --
> > 1.8.3.1
> >
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
2018-11-15 7:19 ` Xiaoli Feng
@ 2018-11-20 8:56 ` Chandan Rajendra
0 siblings, 0 replies; 4+ messages in thread
From: Chandan Rajendra @ 2018-11-20 8:56 UTC (permalink / raw)
To: Xiaoli Feng; +Cc: Eryu Guan, esandeen, jmoyer, fstests, xzhou, linux-xfs
On Thursday, November 15, 2018 12:49:10 PM IST Xiaoli Feng wrote:
> Hello all,
> Any thoughts for this patch? Adding chandan@linux.vnet.ibm.com to cc list for review.
> Because his patch "xfs/050: work with 64k block size" change the bsoft and bhard size.
>
> Thanks.
>
> ----- Original Message -----
> > From: "Eryu Guan" <guaneryu@gmail.com>
> > To: "XiaoLi Feng" <xifeng@redhat.com>
> > Cc: esandeen@redhat.com, jmoyer@redhat.com, fstests@vger.kernel.org, xzhou@redhat.com, linux-xfs@vger.kernel.org
> > Sent: Monday, November 5, 2018 12:15:54 AM
> > Subject: Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
> >
> > On Fri, Oct 26, 2018 at 10:47:54AM +0800, Xiaoli Feng wrote:
> > > From: xiaoli feng <xifeng@redhat.com>
> > >
> > > This case is failed for dax 2MiB alignment test. When test "push past
> > > the hard block limit" in this case, the quota bhard is 4000kb, and
> > > try to create 4096kb in dax fs.
It actually tries to create "1200 * 4096 = 4800kb" right?
> > > dax only create 2048kb because of 2MiB
> > > alignment.
Can you please explain how this could happen?
> > > But there is a check that the file size must > 3400kb(bhard
> > > * 85%). So there are two method to fix it. One is to decrease bhard
> > > size. Second is to descreate minimum size. The minimum is hard to define.
> > > So I choose first method.
> >
> > Adding linux-xfs to cc list for review from xfs folks. Thanks a lot!
> >
> > Eryu
> >
> > > ---
> > > tests/xfs/050 | 4 ++--
> > > tests/xfs/050.out | 60
> > > +++++++++++++++++++++++++++----------------------------
> > > 2 files changed, 32 insertions(+), 32 deletions(-)
> > >
> > > diff --git a/tests/xfs/050 b/tests/xfs/050
> > > index 788ed7f..d2ca477 100755
> > > --- a/tests/xfs/050
> > > +++ b/tests/xfs/050
> > > @@ -43,8 +43,8 @@ _scratch_mount
> > > bsize=$(_get_file_block_size $SCRATCH_MNT)
> > > _scratch_unmount
> > >
> > > -bsoft=$(( 200 * $bsize ))
> > > -bhard=$(( 1000 * $bsize ))
> > > +bsoft=$(( 100 * $bsize ))
> > > +bhard=$(( 500 * $bsize ))
> > > isoft=4
> > > ihard=10
> > >
> > > diff --git a/tests/xfs/050.out b/tests/xfs/050.out
> > > index 725cd79..6a7af1a 100644
> > > --- a/tests/xfs/050.out
> > > +++ b/tests/xfs/050.out
> > > @@ -12,23 +12,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > >
> > > *** report initial settings
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft inode limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the soft block limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the hard inode limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the hard block limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** unmount
> > > *** group
> > > @@ -44,23 +44,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > >
> > > *** report initial settings
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft inode limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the soft block limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the hard inode limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the hard block limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** unmount
> > > *** uqnoenforce
> > > @@ -76,23 +76,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > >
> > > *** report initial settings
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft inode limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft block limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the hard inode limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> > >
> > > *** push past the hard block limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > >
> > > *** unmount
> > > *** gqnoenforce
> > > @@ -108,23 +108,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > >
> > > *** report initial settings
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft inode limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft block limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the hard inode limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> > >
> > > *** push past the hard block limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > >
> > > *** unmount
> > > *** pquota
> > > @@ -140,23 +140,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > >
> > > *** report initial settings
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft inode limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the soft block limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the hard inode limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** push past the hard block limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] =OK= 200 1000 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > > +[NAME] =OK= 100 500 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > >
> > > *** unmount
> > > *** pqnoenforce
> > > @@ -172,22 +172,22 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> > >
> > > *** report initial settings
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft inode limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the soft block limit
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > >
> > > *** push past the hard inode limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> > >
> > > *** push past the hard block limit (expect EDQUOT)
> > > [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > > [--------]
> > >
> > > *** unmount
> > > --
> > > 1.8.3.1
> > >
> >
>
>
--
chandan
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-11-20 19:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-26 2:47 [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test XiaoLi Feng
2018-11-04 16:15 ` Eryu Guan
2018-11-15 7:19 ` Xiaoli Feng
2018-11-20 8:56 ` Chandan Rajendra
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.