From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-kernel@lists.infradead.org, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Marek Vasut <marex@denx.de>, Kieran Bingham <kieran.bingham@ideasonboard.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, patchwork-lst@pengutronix.de, kernel@pengutronix.de Subject: Re: [PATCH 3/4] arm64: dts: imx8mp: add HDMI display pipeline Date: Mon, 29 Aug 2022 08:37:57 +0200 [thread overview] Message-ID: <2648019.mvXUDI8C0e@steina-w> (raw) In-Reply-To: <20220826192932.3217260-3-l.stach@pengutronix.de> Hello Lucas, thanks for that update. Am Freitag, 26. August 2022, 21:29:31 CEST schrieb Lucas Stach: > This adds the DT nodes for all the peripherals that make up the > HDMI display pipeline. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 83 +++++++++++++++++++++++ > 1 file changed, 83 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > 71c2397bf7c2..254d610b93b7 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1145,6 +1145,89 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { > clock-names = "ipg"; > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; > }; > + > + hdmi_pvi: display-bridge@32fc4000 { > + compatible = "fsl,imx8mp-hdmi- pvi"; > + reg = <0x32fc4000 0x40>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pvi_from_lcdif3: endpoint { > + remote-endpoint = <&lcdif3_to_pvi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + pvi_to_hdmi_tx: endpoint { > + remote-endpoint = <&hdmi_tx_from_pvi>; > + }; > + }; > + }; > + }; > + > + lcdif3: display-controller@32fc6000 { > + compatible = "fsl,imx8mp-lcdif"; > + reg = <0x32fc6000 0x238>; > + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; Shouldn't this just be 'interrupts = <8>;'? The irqsteer_hdmi has #interrupt- cells = <1>; Best regards, Alexander > + interrupt-parent = <&irqsteer_hdmi>; > + clocks = <&hdmi_tx_phy>, > + <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_ROOT>; > + clock-names = "pix", "axi", "disp_axi"; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; > + status = "disabled"; > + > + port { > + lcdif3_to_pvi: endpoint { > + remote- endpoint = <&pvi_from_lcdif3>; > + }; > + }; > + }; > + > + hdmi_tx: hdmi@32fd8000 { > + compatible = "fsl,imx8mp-hdmi"; > + reg = <0x32fd8000 0x7eff>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&irqsteer_hdmi>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_REF_266M>, > + <&clk IMX8MP_CLK_HDMI_FDCC_TST>, > + <&clk IMX8MP_CLK_32K>, > + <&hdmi_tx_phy>; > + clock-names = "iahb", "isfr", "fdcc", "cec", "pix"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; > + reg-io-width = <1>; > + status = "disabled"; > + > + port { > + hdmi_tx_from_pvi: endpoint { > + remote- endpoint = <&pvi_to_hdmi_tx>; > + }; > + }; > + }; > + > + hdmi_tx_phy: phy@32fdff00 { > + compatible = "fsl,imx8mp-hdmi- phy"; > + reg = <0x32fdff00 0x100>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_24M>; > + clock-names = "apb", "ref"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; > + #clock-cells = <0>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > }; > > gpu3d: gpu@38000000 {
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-kernel@lists.infradead.org, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Marek Vasut <marex@denx.de>, Kieran Bingham <kieran.bingham@ideasonboard.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, patchwork-lst@pengutronix.de, kernel@pengutronix.de Subject: Re: [PATCH 3/4] arm64: dts: imx8mp: add HDMI display pipeline Date: Mon, 29 Aug 2022 08:37:57 +0200 [thread overview] Message-ID: <2648019.mvXUDI8C0e@steina-w> (raw) In-Reply-To: <20220826192932.3217260-3-l.stach@pengutronix.de> Hello Lucas, thanks for that update. Am Freitag, 26. August 2022, 21:29:31 CEST schrieb Lucas Stach: > This adds the DT nodes for all the peripherals that make up the > HDMI display pipeline. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 83 +++++++++++++++++++++++ > 1 file changed, 83 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > 71c2397bf7c2..254d610b93b7 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1145,6 +1145,89 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { > clock-names = "ipg"; > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; > }; > + > + hdmi_pvi: display-bridge@32fc4000 { > + compatible = "fsl,imx8mp-hdmi- pvi"; > + reg = <0x32fc4000 0x40>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pvi_from_lcdif3: endpoint { > + remote-endpoint = <&lcdif3_to_pvi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + pvi_to_hdmi_tx: endpoint { > + remote-endpoint = <&hdmi_tx_from_pvi>; > + }; > + }; > + }; > + }; > + > + lcdif3: display-controller@32fc6000 { > + compatible = "fsl,imx8mp-lcdif"; > + reg = <0x32fc6000 0x238>; > + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; Shouldn't this just be 'interrupts = <8>;'? The irqsteer_hdmi has #interrupt- cells = <1>; Best regards, Alexander > + interrupt-parent = <&irqsteer_hdmi>; > + clocks = <&hdmi_tx_phy>, > + <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_ROOT>; > + clock-names = "pix", "axi", "disp_axi"; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; > + status = "disabled"; > + > + port { > + lcdif3_to_pvi: endpoint { > + remote- endpoint = <&pvi_from_lcdif3>; > + }; > + }; > + }; > + > + hdmi_tx: hdmi@32fd8000 { > + compatible = "fsl,imx8mp-hdmi"; > + reg = <0x32fd8000 0x7eff>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&irqsteer_hdmi>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_REF_266M>, > + <&clk IMX8MP_CLK_HDMI_FDCC_TST>, > + <&clk IMX8MP_CLK_32K>, > + <&hdmi_tx_phy>; > + clock-names = "iahb", "isfr", "fdcc", "cec", "pix"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; > + reg-io-width = <1>; > + status = "disabled"; > + > + port { > + hdmi_tx_from_pvi: endpoint { > + remote- endpoint = <&pvi_to_hdmi_tx>; > + }; > + }; > + }; > + > + hdmi_tx_phy: phy@32fdff00 { > + compatible = "fsl,imx8mp-hdmi- phy"; > + reg = <0x32fdff00 0x100>; > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > + <&clk IMX8MP_CLK_HDMI_24M>; > + clock-names = "apb", "ref"; > + assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; > + #clock-cells = <0>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > }; > > gpu3d: gpu@38000000 { _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-29 6:38 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-26 19:29 [PATCH 1/4] arm64: dts: imx8mp: add HDMI power-domains Lucas Stach 2022-08-26 19:29 ` Lucas Stach 2022-08-26 19:29 ` [PATCH 2/4] arm64: dts: imx8mp: add HDMI irqsteer Lucas Stach 2022-08-26 19:29 ` Lucas Stach 2022-08-26 19:29 ` [PATCH 3/4] arm64: dts: imx8mp: add HDMI display pipeline Lucas Stach 2022-08-26 19:29 ` Lucas Stach 2022-08-29 6:37 ` Alexander Stein [this message] 2022-08-29 6:37 ` Alexander Stein 2022-09-05 2:04 ` Shawn Guo 2022-09-05 2:04 ` Shawn Guo 2023-03-03 17:26 ` Luca Ceresoli 2023-03-03 17:26 ` Luca Ceresoli 2022-08-26 19:29 ` [PATCH 4/4] arm64: dts: imx8mp-evk: enable HDMI Lucas Stach 2022-08-26 19:29 ` Lucas Stach 2023-03-02 15:35 ` Luca Ceresoli 2023-03-02 15:35 ` Luca Ceresoli 2023-05-25 10:26 ` Luca Ceresoli 2023-05-25 10:26 ` Luca Ceresoli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=2648019.mvXUDI8C0e@steina-w \ --to=alexander.stein@ew.tq-group.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kieran.bingham@ideasonboard.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=l.stach@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=marex@denx.de \ --cc=patchwork-lst@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.