* [PATCH v2 00/14] rockchip: Add new rk3399 boards
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
This series is combination of previous version[1] plus new rk3399
boards addition.
Overall this series add support below rk3399 boards
- Orangepi RK3399
- Nanopc T4
- Nanopi M4
- Nanopi NEO4
- Orangepi RK3399
- Rockpro64
All the respective dts(i) files are synced from Linux 5.1-rc2 and few
dts(i) from linux-next.
Nanopi NEO4, Rockpro64 are supporting via Rockchip miniloader, and rest
support both Rockchip miniloader along with U-Boot SPL.
- Rockpro64, is not possible to boot via U-Boot SPL since it has dependency with LPDDR4
code which is work-in-progress and as soon it arrived in mailing list, will update the
same with ddr dtsi.
- Nanopi NEO4 has some ddr issue with[2] rk3399-sdram-ddr3-1866.dtsi,
will update the same with U-Boot SPL once it is fixed.
patch 1, 2: Sync rk3399 dtsi files from Linux 5.1-rc2
patch 3: Create global rk3399-u-boot.dtsi
patch 4: move default SPL_FIT_GENERATOR to Kconfig
patch 5: Move common rk3399 configs into Kconfig
patch 6: Add Orangepi RK3399 support
patch 7: Sync rk3399-nanopi4.dtsi from Linux
patch 8: Fix for sdmmc CD pin
patch 9: Add 4GB LPDDR3-1866 ddr dtsi
patch 10: Add Nanopi M4 support
patch 11: Add Nanopc T4 support
patch 12: Add Nanopi NEO4 support
patch 13: Add Rockpro64 support
patch 14: Global document for build/flash
[2] https://marc.info/?l=u-boot&m=154671835328469&w=2
[1] https://patchwork.ozlabs.org/patch/1054208/
Any inputs?
Jagan.
Jagan Teki (14):
rockchip: dts: rk3399: Sync rk3399-opp from Linux
rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
Kconfig: Add default SPL_FIT_GENERATOR for rockchip
arm: rockchip: rk3399: Move common configs in Kconfig
rockchip: rk3399: Add Orangepi RK3399 support
rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings
rockchip: rk3399: Add Nanopi M4 board support
rockchip: rk3399: Add Nanopc T4 board support
rockchip: rk3399: Add Nanopi NEO4 board support
rockchip: rk3399: Add Rockpro64 board support
doc: rockchip: Add global doc for rk3399 build/flash
Kconfig | 1 +
arch/arm/dts/Makefile | 5 +
arch/arm/dts/rk3399-evb.dts | 1 -
arch/arm/dts/rk3399-firefly.dts | 1 -
arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-nanopc-t4.dts | 91 +
arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-nanopi-m4.dts | 66 +
arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-nanopi-neo4.dts | 50 +
arch/arm/dts/rk3399-nanopi4.dtsi | 699 ++++++++
arch/arm/dts/rk3399-opp.dtsi | 133 ++
arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++
arch/arm/dts/rk3399-puma.dtsi | 1 -
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++
.../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
arch/arm/dts/rk3399-u-boot.dtsi | 8 +
arch/arm/dts/rk3399.dtsi | 6 +
arch/arm/mach-rockchip/Kconfig | 16 +
board/rockchip/evb_rk3399/MAINTAINERS | 32 +
configs/chromebook_bob_defconfig | 17 -
configs/evb-rk3399_defconfig | 17 -
configs/ficus-rk3399_defconfig | 17 -
configs/firefly-rk3399_defconfig | 17 -
configs/nanopc-t4-rk3399_defconfig | 58 +
configs/nanopi-m4-rk3399_defconfig | 58 +
configs/nanopi-neo4-rk3399_defconfig | 58 +
configs/orangepi-rk3399_defconfig | 58 +
configs/puma-rk3399_defconfig | 16 -
configs/rock960-rk3399_defconfig | 17 -
configs/rockpro64-rk3399_defconfig | 58 +
doc/README.rockchip | 209 ++-
34 files changed, 4656 insertions(+), 105 deletions(-)
create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
create mode 100644 arch/arm/dts/rk3399-opp.dtsi
create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-orangepi.dts
create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
create mode 100644 configs/nanopc-t4-rk3399_defconfig
create mode 100644 configs/nanopi-m4-rk3399_defconfig
create mode 100644 configs/nanopi-neo4-rk3399_defconfig
create mode 100644 configs/orangepi-rk3399_defconfig
create mode 100644 configs/rockpro64-rk3399_defconfig
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 00/14] rockchip: Add new rk3399 boards
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
This series is combination of previous version[1] plus new rk3399
boards addition.
Overall this series add support below rk3399 boards
- Orangepi RK3399
- Nanopc T4
- Nanopi M4
- Nanopi NEO4
- Orangepi RK3399
- Rockpro64
All the respective dts(i) files are synced from Linux 5.1-rc2 and few
dts(i) from linux-next.
Nanopi NEO4, Rockpro64 are supporting via Rockchip miniloader, and rest
support both Rockchip miniloader along with U-Boot SPL.
- Rockpro64, is not possible to boot via U-Boot SPL since it has dependency with LPDDR4
code which is work-in-progress and as soon it arrived in mailing list, will update the
same with ddr dtsi.
- Nanopi NEO4 has some ddr issue with[2] rk3399-sdram-ddr3-1866.dtsi,
will update the same with U-Boot SPL once it is fixed.
patch 1, 2: Sync rk3399 dtsi files from Linux 5.1-rc2
patch 3: Create global rk3399-u-boot.dtsi
patch 4: move default SPL_FIT_GENERATOR to Kconfig
patch 5: Move common rk3399 configs into Kconfig
patch 6: Add Orangepi RK3399 support
patch 7: Sync rk3399-nanopi4.dtsi from Linux
patch 8: Fix for sdmmc CD pin
patch 9: Add 4GB LPDDR3-1866 ddr dtsi
patch 10: Add Nanopi M4 support
patch 11: Add Nanopc T4 support
patch 12: Add Nanopi NEO4 support
patch 13: Add Rockpro64 support
patch 14: Global document for build/flash
[2] https://marc.info/?l=u-boot&m=154671835328469&w=2
[1] https://patchwork.ozlabs.org/patch/1054208/
Any inputs?
Jagan.
Jagan Teki (14):
rockchip: dts: rk3399: Sync rk3399-opp from Linux
rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
Kconfig: Add default SPL_FIT_GENERATOR for rockchip
arm: rockchip: rk3399: Move common configs in Kconfig
rockchip: rk3399: Add Orangepi RK3399 support
rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings
rockchip: rk3399: Add Nanopi M4 board support
rockchip: rk3399: Add Nanopc T4 board support
rockchip: rk3399: Add Nanopi NEO4 board support
rockchip: rk3399: Add Rockpro64 board support
doc: rockchip: Add global doc for rk3399 build/flash
Kconfig | 1 +
arch/arm/dts/Makefile | 5 +
arch/arm/dts/rk3399-evb.dts | 1 -
arch/arm/dts/rk3399-firefly.dts | 1 -
arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-nanopc-t4.dts | 91 +
arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-nanopi-m4.dts | 66 +
arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-nanopi-neo4.dts | 50 +
arch/arm/dts/rk3399-nanopi4.dtsi | 699 ++++++++
arch/arm/dts/rk3399-opp.dtsi | 133 ++
arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++
arch/arm/dts/rk3399-puma.dtsi | 1 -
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++
.../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
arch/arm/dts/rk3399-u-boot.dtsi | 8 +
arch/arm/dts/rk3399.dtsi | 6 +
arch/arm/mach-rockchip/Kconfig | 16 +
board/rockchip/evb_rk3399/MAINTAINERS | 32 +
configs/chromebook_bob_defconfig | 17 -
configs/evb-rk3399_defconfig | 17 -
configs/ficus-rk3399_defconfig | 17 -
configs/firefly-rk3399_defconfig | 17 -
configs/nanopc-t4-rk3399_defconfig | 58 +
configs/nanopi-m4-rk3399_defconfig | 58 +
configs/nanopi-neo4-rk3399_defconfig | 58 +
configs/orangepi-rk3399_defconfig | 58 +
configs/puma-rk3399_defconfig | 16 -
configs/rock960-rk3399_defconfig | 17 -
configs/rockpro64-rk3399_defconfig | 58 +
doc/README.rockchip | 209 ++-
34 files changed, 4656 insertions(+), 105 deletions(-)
create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
create mode 100644 arch/arm/dts/rk3399-opp.dtsi
create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-orangepi.dts
create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
create mode 100644 configs/nanopc-t4-rk3399_defconfig
create mode 100644 configs/nanopi-m4-rk3399_defconfig
create mode 100644 configs/nanopi-neo4-rk3399_defconfig
create mode 100644 configs/orangepi-rk3399_defconfig
create mode 100644 configs/rockpro64-rk3399_defconfig
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v2 01/14] rockchip: dts: rk3399: Sync rk3399-opp from Linux
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Sync rk3399-opp.dtsi from Linux.
Linux commit details about the rk3399-opp.dtsi sync:
"arm64: dts: rockchip: use SPDX-License-Identifier"
(sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/rk3399-opp.dtsi | 133 +++++++++++++++++++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 arch/arm/dts/rk3399-opp.dtsi
diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
new file mode 100644
index 0000000000..d6f1095abb
--- /dev/null
+++ b/arch/arm/dts/rk3399-opp.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+ cluster0_opp: opp-table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <925000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1125000>;
+ };
+ };
+
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1200000>;
+ };
+ };
+
+ gpu_opp_table: opp-table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
+};
+
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 01/14] rockchip: dts: rk3399: Sync rk3399-opp from Linux
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Sync rk3399-opp.dtsi from Linux.
Linux commit details about the rk3399-opp.dtsi sync:
"arm64: dts: rockchip: use SPDX-License-Identifier"
(sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/rk3399-opp.dtsi | 133 +++++++++++++++++++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 arch/arm/dts/rk3399-opp.dtsi
diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
new file mode 100644
index 0000000000..d6f1095abb
--- /dev/null
+++ b/arch/arm/dts/rk3399-opp.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+ cluster0_opp: opp-table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <925000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1125000>;
+ };
+ };
+
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1200000>;
+ };
+ };
+
+ gpu_opp_table: opp-table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
+};
+
+&cpu_l0 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+ operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+ operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 02/14] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
To make successful build with dts(i) files syncing from Linux 5.1-rc2
the rk3399.dtsi would require pwm2_pin_pull_down.
So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2. Since this
node is strictly not part of any commit alone, I have mentioned
Linux 5.1-rc2 tag for future reference of where would this sync
coming from.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/rk3399.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index b53e41b4dc..99471f6287 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -2495,6 +2495,12 @@
rockchip,pins =
<1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
};
+
+
+ pwm2_pin_pull_down: pwm2-pin-pull-down {
+ rockchip,pins =
+ <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
+ };
};
pwm3a {
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 02/14] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
To make successful build with dts(i) files syncing from Linux 5.1-rc2
the rk3399.dtsi would require pwm2_pin_pull_down.
So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2. Since this
node is strictly not part of any commit alone, I have mentioned
Linux 5.1-rc2 tag for future reference of where would this sync
coming from.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/rk3399.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index b53e41b4dc..99471f6287 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -2495,6 +2495,12 @@
rockchip,pins =
<1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
};
+
+
+ pwm2_pin_pull_down: pwm2-pin-pull-down {
+ rockchip,pins =
+ <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
+ };
};
pwm3a {
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 03/14] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
u-boot,dm-pre-reloc is required for SDMMC booted rk3399 boards and
which is U-Boot specific devicetrees binding.
Move it on global rk3399-u-boot.dtsi file and rest of the U-Boot
bindings will move it future based on the requirement.
This would help to sync the devicetrees from Linux whenever required
instead of adding specific nodes.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/rk3399-evb.dts | 1 -
arch/arm/dts/rk3399-firefly.dts | 1 -
arch/arm/dts/rk3399-puma.dtsi | 1 -
arch/arm/dts/rk3399-u-boot.dtsi | 8 ++++++++
4 files changed, 8 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index ce004d0d18..9162f3dd50 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -155,7 +155,6 @@
};
&sdmmc {
- u-boot,dm-pre-reloc;
bus-width = <4>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index f90e7e88db..46f2ffaf8d 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -592,7 +592,6 @@
};
&sdmmc {
- u-boot,dm-pre-reloc;
bus-width = <4>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 8304f67192..9049694243 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -492,7 +492,6 @@
};
&sdmmc {
- u-boot,dm-pre-reloc;
clock-frequency = <150000000>;
max-frequency = <40000000>;
supports-sd;
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
new file mode 100644
index 0000000000..f533ed95eb
--- /dev/null
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 03/14] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
u-boot,dm-pre-reloc is required for SDMMC booted rk3399 boards and
which is U-Boot specific devicetrees binding.
Move it on global rk3399-u-boot.dtsi file and rest of the U-Boot
bindings will move it future based on the requirement.
This would help to sync the devicetrees from Linux whenever required
instead of adding specific nodes.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/rk3399-evb.dts | 1 -
arch/arm/dts/rk3399-firefly.dts | 1 -
arch/arm/dts/rk3399-puma.dtsi | 1 -
arch/arm/dts/rk3399-u-boot.dtsi | 8 ++++++++
4 files changed, 8 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index ce004d0d18..9162f3dd50 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -155,7 +155,6 @@
};
&sdmmc {
- u-boot,dm-pre-reloc;
bus-width = <4>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index f90e7e88db..46f2ffaf8d 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -592,7 +592,6 @@
};
&sdmmc {
- u-boot,dm-pre-reloc;
bus-width = <4>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 8304f67192..9049694243 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -492,7 +492,6 @@
};
&sdmmc {
- u-boot,dm-pre-reloc;
clock-frequency = <150000000>;
max-frequency = <40000000>;
supports-sd;
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
new file mode 100644
index 0000000000..f533ed95eb
--- /dev/null
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
6 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/Kconfig b/Kconfig
index 305b265ed7..5679a288ec 100644
--- a/Kconfig
+++ b/Kconfig
@@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce3deccb8a..04e25e1d4f 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index d98535357a..49b2e2e089 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 94c565efc2..fe3b9964e8 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 6725b48970..914304bb43 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index cb5a35f4f5..5e6778ea20 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
6 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/Kconfig b/Kconfig
index 305b265ed7..5679a288ec 100644
--- a/Kconfig
+++ b/Kconfig
@@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce3deccb8a..04e25e1d4f 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index d98535357a..49b2e2e089 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 94c565efc2..fe3b9964e8 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 6725b48970..914304bb43 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index cb5a35f4f5..5e6778ea20 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 05/14] arm: rockchip: rk3399: Move common configs in Kconfig
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Few SPL and U-Boot proper configs are common to all rk3399 target
defconfigs, move them and select it from platform kconfig.
Moved configs:
- SPL_ATF
- SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
- SPL_LOAD_FIT
- SPL_CLK if SPL
- SPL_PINCTRL if SPL
- SPL_RAM if SPL
- SPL_REGMAP if SPL
- SPL_SYSCON if SPL
- CLK
- FIT
- PINCTRL
- RAM
- REGMAP
- SYSCON
- DM_PMIC
- DM_REGULATOR_FIXED
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/mach-rockchip/Kconfig | 16 ++++++++++++++++
configs/chromebook_bob_defconfig | 16 ----------------
configs/evb-rk3399_defconfig | 16 ----------------
configs/ficus-rk3399_defconfig | 16 ----------------
configs/firefly-rk3399_defconfig | 16 ----------------
configs/puma-rk3399_defconfig | 16 ----------------
configs/rock960-rk3399_defconfig | 16 ----------------
7 files changed, 16 insertions(+), 96 deletions(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b9a026abb5..dbe7f11d39 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -132,9 +132,25 @@ config ROCKCHIP_RK3399
select ARM64
select SUPPORT_SPL
select SPL
+ select SPL_ATF
+ select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
+ select SPL_LOAD_FIT
+ select SPL_CLK if SPL
+ select SPL_PINCTRL if SPL
+ select SPL_RAM if SPL
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
select SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select SPL_DRIVERS_MISC_SUPPORT
+ select CLK
+ select FIT
+ select PINCTRL
+ select RAM
+ select REGMAP
+ select SYSCON
+ select DM_PMIC
+ select DM_REGULATOR_FIXED
select DEBUG_UART_BOARD_INIT
select BOARD_LATE_INIT
select ROCKCHIP_BROM_HELPER
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index 04e25e1d4f..fdcbabf912 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -17,16 +17,12 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
@@ -45,12 +41,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-gru-bob"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SYS_I2C_ROCKCHIP=y
@@ -70,16 +60,10 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 49b2e2e089..1ba9dcba62 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
@@ -32,12 +28,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index fe3b9964e8..67c62065aa 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -11,14 +11,10 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
@@ -31,12 +27,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -48,17 +38,11 @@ CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 914304bb43..1d3a7f2982 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
@@ -31,12 +27,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 3547ec6b27..e5ea2fe0b3 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -15,8 +15,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
CONFIG_MISC_INIT_R=y
@@ -31,8 +29,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -51,12 +47,6 @@ CONFIG_OF_LIVE=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
@@ -74,20 +64,14 @@ CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_DM_RTC=y
CONFIG_RTC_ISL1208=y
CONFIG_DEBUG_UART_SHIFT=2
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index 5e6778ea20..cc7d6f89b1 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_SYS_PROMPT="rock960 => "
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
@@ -32,12 +28,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock960"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -45,16 +35,10 @@ CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 05/14] arm: rockchip: rk3399: Move common configs in Kconfig
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Few SPL and U-Boot proper configs are common to all rk3399 target
defconfigs, move them and select it from platform kconfig.
Moved configs:
- SPL_ATF
- SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
- SPL_LOAD_FIT
- SPL_CLK if SPL
- SPL_PINCTRL if SPL
- SPL_RAM if SPL
- SPL_REGMAP if SPL
- SPL_SYSCON if SPL
- CLK
- FIT
- PINCTRL
- RAM
- REGMAP
- SYSCON
- DM_PMIC
- DM_REGULATOR_FIXED
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-rockchip/Kconfig | 16 ++++++++++++++++
configs/chromebook_bob_defconfig | 16 ----------------
configs/evb-rk3399_defconfig | 16 ----------------
configs/ficus-rk3399_defconfig | 16 ----------------
configs/firefly-rk3399_defconfig | 16 ----------------
configs/puma-rk3399_defconfig | 16 ----------------
configs/rock960-rk3399_defconfig | 16 ----------------
7 files changed, 16 insertions(+), 96 deletions(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b9a026abb5..dbe7f11d39 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -132,9 +132,25 @@ config ROCKCHIP_RK3399
select ARM64
select SUPPORT_SPL
select SPL
+ select SPL_ATF
+ select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
+ select SPL_LOAD_FIT
+ select SPL_CLK if SPL
+ select SPL_PINCTRL if SPL
+ select SPL_RAM if SPL
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
select SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select SPL_DRIVERS_MISC_SUPPORT
+ select CLK
+ select FIT
+ select PINCTRL
+ select RAM
+ select REGMAP
+ select SYSCON
+ select DM_PMIC
+ select DM_REGULATOR_FIXED
select DEBUG_UART_BOARD_INIT
select BOARD_LATE_INIT
select ROCKCHIP_BROM_HELPER
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index 04e25e1d4f..fdcbabf912 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -17,16 +17,12 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
@@ -45,12 +41,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-gru-bob"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SYS_I2C_ROCKCHIP=y
@@ -70,16 +60,10 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 49b2e2e089..1ba9dcba62 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
@@ -32,12 +28,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index fe3b9964e8..67c62065aa 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -11,14 +11,10 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
@@ -31,12 +27,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -48,17 +38,11 @@ CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 914304bb43..1d3a7f2982 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
@@ -31,12 +27,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 3547ec6b27..e5ea2fe0b3 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -15,8 +15,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
CONFIG_MISC_INIT_R=y
@@ -31,8 +29,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -51,12 +47,6 @@ CONFIG_OF_LIVE=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
@@ -74,20 +64,14 @@ CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_DM_RTC=y
CONFIG_RTC_ISL1208=y
CONFIG_DEBUG_UART_SHIFT=2
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index 5e6778ea20..cc7d6f89b1 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL_ATF=y
-CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_SYS_PROMPT="rock960 => "
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
@@ -32,12 +28,6 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock960"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
@@ -45,16 +35,10 @@ CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 06/14] rockchip: rk3399: Add Orangepi RK3399 support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add initial support for Orangepi RK3399 board.
Specification
- Rockchip RK3399
- 2GB/4GB DDR3
- 16GB eMMC
- SD card slot
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- Mini PCIe
- Sensors, Keys etc
- DC12V-2A and DC5V-2A
Commit details about Linux DTS sync:
"arm64: dts: rockchip: Add support for the Orange Pi RK3399"
(sha1: d3e71487a790979057c0fdbf32f85033639c16e6)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 7 +
configs/orangepi-rk3399_defconfig | 58 ++
5 files changed, 844 insertions(+)
create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-orangepi.dts
create mode 100644 configs/orangepi-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0e2ffdb87f..6d55b0caf8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
diff --git a/arch/arm/dts/rk3399-orangepi-u-boot.dtsi b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
new file mode 100644
index 0000000000..236b61d78d
--- /dev/null
+++ b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1333.dtsi"
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
new file mode 100644
index 0000000000..cf37b96a6b
--- /dev/null
+++ b/arch/arm/dts/rk3399-orangepi.dts
@@ -0,0 +1,771 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Orange Pi RK3399 Board";
+ compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ press-threshold-microvolt = <985000>;
+ };
+
+ menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <1314000>;
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_btn>;
+ wakeup-source;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_typec0: vcc5v0-typec0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec0_en>;
+ regulator-name = "vcc5v0_typec0";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc3v3_s3>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_tp: LDO_REG2 {
+ regulator-name = "vcc3v0_tp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmupll: LDO_REG3 {
+ regulator-name = "vcc1v8_pmupll";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ ak09911@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+ vdd-supply = <&vcc3v3_s3>;
+ };
+
+ mpu6500@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsensor_int_l>;
+ vddio-supply = <&vcc3v3_s3>;
+ };
+
+ lsm6ds3@6a {
+ compatible = "st,lsm6ds3";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyr_int_l>;
+ vdd-supply = <&vcc3v3_s3>;
+ vddio-supply = <&vcc3v3_s3>;
+ };
+
+ cm32181@10 {
+ compatible = "capella,cm32181";
+ reg = <0x10>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&light_int_l>;
+ vdd-supply = <&vcc3v3_s3>;
+ };
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcc_3v0>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+ buttons {
+ pwr_btn: pwr-btn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_typec0_en: vcc5v0-typec0-en {
+ rockchip,pins =
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ bluetooth {
+ bt_reg_on_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mpu6500 {
+ gsensor_int_l: gsensor-int-l {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lsm6ds3 {
+ gyr_int_l: gyr-int-l {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cm32181 {
+ light_int_l: light-int-l {
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ clock-frequency = <50000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ clock-frequency = <150000000>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc5v0_typec0>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index caad30641e..07ee8ce92c 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -5,3 +5,10 @@ F: board/rockchip/evb_rk3399
F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+
+ORANGEPI-RK3399
+M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S: Maintained
+F: configs/orangepi-rk3399_defconfig
+F: arch/arm/dts/rk3399-u-boot.dtsi
+F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
new file mode 100644
index 0000000000..deb7bc1388
--- /dev/null
+++ b/configs/orangepi-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 06/14] rockchip: rk3399: Add Orangepi RK3399 support
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add initial support for Orangepi RK3399 board.
Specification
- Rockchip RK3399
- 2GB/4GB DDR3
- 16GB eMMC
- SD card slot
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- Mini PCIe
- Sensors, Keys etc
- DC12V-2A and DC5V-2A
Commit details about Linux DTS sync:
"arm64: dts: rockchip: Add support for the Orange Pi RK3399"
(sha1: d3e71487a790979057c0fdbf32f85033639c16e6)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 7 +
configs/orangepi-rk3399_defconfig | 58 ++
5 files changed, 844 insertions(+)
create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-orangepi.dts
create mode 100644 configs/orangepi-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0e2ffdb87f..6d55b0caf8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
diff --git a/arch/arm/dts/rk3399-orangepi-u-boot.dtsi b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
new file mode 100644
index 0000000000..236b61d78d
--- /dev/null
+++ b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-ddr3-1333.dtsi"
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
new file mode 100644
index 0000000000..cf37b96a6b
--- /dev/null
+++ b/arch/arm/dts/rk3399-orangepi.dts
@@ -0,0 +1,771 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Orange Pi RK3399 Board";
+ compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ press-threshold-microvolt = <985000>;
+ };
+
+ menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <1314000>;
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_btn>;
+ wakeup-source;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_typec0: vcc5v0-typec0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec0_en>;
+ regulator-name = "vcc5v0_typec0";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc3v3_s3>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic at 1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_tp: LDO_REG2 {
+ regulator-name = "vcc3v0_tp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmupll: LDO_REG3 {
+ regulator-name = "vcc1v8_pmupll";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator at 40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator at 41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ ak09911 at c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+ vdd-supply = <&vcc3v3_s3>;
+ };
+
+ mpu6500 at 68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsensor_int_l>;
+ vddio-supply = <&vcc3v3_s3>;
+ };
+
+ lsm6ds3 at 6a {
+ compatible = "st,lsm6ds3";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyr_int_l>;
+ vdd-supply = <&vcc3v3_s3>;
+ vddio-supply = <&vcc3v3_s3>;
+ };
+
+ cm32181 at 10 {
+ compatible = "capella,cm32181";
+ reg = <0x10>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&light_int_l>;
+ vdd-supply = <&vcc3v3_s3>;
+ };
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcc_3v0>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+ buttons {
+ pwr_btn: pwr-btn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_typec0_en: vcc5v0-typec0-en {
+ rockchip,pins =
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ bluetooth {
+ bt_reg_on_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mpu6500 {
+ gsensor_int_l: gsensor-int-l {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lsm6ds3 {
+ gyr_int_l: gyr-int-l {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cm32181 {
+ light_int_l: light-int-l {
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ clock-frequency = <50000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi at 1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ clock-frequency = <150000000>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc5v0_typec0>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index caad30641e..07ee8ce92c 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -5,3 +5,10 @@ F: board/rockchip/evb_rk3399
F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+
+ORANGEPI-RK3399
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/orangepi-rk3399_defconfig
+F: arch/arm/dts/rk3399-u-boot.dtsi
+F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
new file mode 100644
index 0000000000..deb7bc1388
--- /dev/null
+++ b/configs/orangepi-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 07/14] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag.
Linux commit details about the rk3399-nanopi4.dtsi sync:
"arm64: dts: rockchip: Add nanopi4 bluetooth"
(sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/rk3399-nanopi4.dtsi | 703 +++++++++++++++++++++++++++++++
1 file changed, 703 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
new file mode 100644
index 0000000000..d325e11728
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -0,0 +1,703 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sys";
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys";
+ vin-supply = <&vdd_5v>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_s3";
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vbus_typec: vbus-typec {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vbus_typec";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_gpio>;
+
+ status {
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ label = "status_led";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clock-parents = <&clkin_gmac>;
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc3v3_s3>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu_b_sleep>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu_b";
+ regulator-ramp-delay = <1000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpu_sleep>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <1000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ clock-output-names = "xin32k", "rtc_clko_wifi";
+ #clock-cells = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_center";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_cpu_l";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_cam: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_cam";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_touch";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmupll: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_pmupll";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-init-microvolt = <3000000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sdio";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcca3v0_codec";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc_1v5";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_codec";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc_3v0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_s3";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <200000>;
+ i2c-scl-rising-time-ns = <150>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vbus_typec>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&io_domains {
+ bt656-supply = <&vcc_1v8>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pcie_phy {
+ assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+ assigned-clock-rates = <100000000>;
+ assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+ max-link-speed = <2>;
+ num-lanes = <4>;
+ status = "okay";
+};
+
+&pinctrl {
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-leds {
+ leds_gpio: leds-gpio {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ cpu_b_sleep: cpu-b-sleep {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ gpu_sleep: gpu-sleep {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rockchip-key {
+ power_key: power-key {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio {
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reg_on_h: bt-reg-on-h {
+ /* external pullup to VCC1V8_PMUPLL */
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_reg_on_h: wifi-reg_on-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc0_det_l: sdmmc0-det-l {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "active";
+ pinctrl-0 = <&pwm2_pin_pull_down>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_host {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <4000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 07/14] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag.
Linux commit details about the rk3399-nanopi4.dtsi sync:
"arm64: dts: rockchip: Add nanopi4 bluetooth"
(sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/rk3399-nanopi4.dtsi | 703 +++++++++++++++++++++++++++++++
1 file changed, 703 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
new file mode 100644
index 0000000000..d325e11728
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -0,0 +1,703 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sys";
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys";
+ vin-supply = <&vdd_5v>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_s3";
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vbus_typec: vbus-typec {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vbus_typec";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_gpio>;
+
+ status {
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ label = "status_led";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clock-parents = <&clkin_gmac>;
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc3v3_s3>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ vdd_cpu_b: regulator at 40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu_b_sleep>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu_b";
+ regulator-ramp-delay = <1000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator at 41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpu_sleep>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <1000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic at 1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ clock-output-names = "xin32k", "rtc_clko_wifi";
+ #clock-cells = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_center";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_cpu_l";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_cam: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_cam";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_touch";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmupll: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_pmupll";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-init-microvolt = <3000000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sdio";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcca3v0_codec";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc_1v5";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_codec";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc_3v0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_s3";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <200000>;
+ i2c-scl-rising-time-ns = <150>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ fusb0: typec-portc at 22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vbus_typec>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&io_domains {
+ bt656-supply = <&vcc_1v8>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pcie_phy {
+ assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+ assigned-clock-rates = <100000000>;
+ assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+ max-link-speed = <2>;
+ num-lanes = <4>;
+ status = "okay";
+};
+
+&pinctrl {
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-leds {
+ leds_gpio: leds-gpio {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ cpu_b_sleep: cpu-b-sleep {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ gpu_sleep: gpu-sleep {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rockchip-key {
+ power_key: power-key {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio {
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reg_on_h: bt-reg-on-h {
+ /* external pullup to VCC1V8_PMUPLL */
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_reg_on_h: wifi-reg_on-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc0_det_l: sdmmc0-det-l {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "active";
+ pinctrl-0 = <&pwm2_pin_pull_down>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_host {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <4000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
indeed failed to detect the sdcard on the board with below error
Card did not respond to voltage select!
So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
is already defined in rk3399.dts so make use of same like
other boards.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/rk3399-nanopi4.dtsi | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index d325e11728..5dc8a8de16 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -521,10 +521,6 @@
};
sdmmc {
- sdmmc0_det_l: sdmmc0-det-l {
- rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
sdmmc0_pwr_h: sdmmc0-pwr-h {
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -582,7 +578,7 @@
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
indeed failed to detect the sdcard on the board with below error
Card did not respond to voltage select!
So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
is already defined in rk3399.dts so make use of same like
other boards.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/rk3399-nanopi4.dtsi | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index d325e11728..5dc8a8de16 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -521,10 +521,6 @@
};
sdmmc {
- sdmmc0_det_l: sdmmc0-det-l {
- rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
sdmmc0_pwr_h: sdmmc0-pwr-h {
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -582,7 +578,7 @@
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Liviu Dudau,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
Full credits to 'Liviu Dudau' who is the real author for this change.
Signed-off-by: Liviu Dudau <liviu-I3yL/QOVVjH10XsdtD+oqA@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
.../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
1 file changed, 1535 insertions(+)
create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
diff --git a/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
new file mode 100644
index 0000000000..1ee08bb0a1
--- /dev/null
+++ b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
@@ -0,0 +1,1535 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2018 Liviu Dudau <liviu-I3yL/QOVVjH10XsdtD+oqA@public.gmane.org>
+ */
+
+&dmc {
+ rockchip,sdram-params = <
+ 0x2
+ 0xa
+ 0x3
+ 0x2
+ 0x2
+ 0x0
+ 0xf
+ 0xf
+ 1
+ 0x801d181e
+ 0x17050a08
+ 0x00000002
+ 0x00006426
+ 0x0000004c
+ 0x00000000
+ 0x2
+ 0xa
+ 0x3
+ 0x2
+ 0x2
+ 0x0
+ 0xf
+ 0xf
+ 1
+ 0x801d181e
+ 0x17050a08
+ 0x00000002
+ 0x00006426
+ 0x0000004c
+ 0x00000000
+ 933
+ 6
+ 2
+ 13
+ 1
+ 0x00000700
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x0000005e
+ 0x0002d976
+ 0x000003a6
+ 0x0000247a
+ 0x0000005e
+ 0x0002d976
+ 0x000003a6
+ 0x0000247a
+ 0x0000005e
+ 0x0002d976
+ 0x000003a6
+ 0x0100247a
+ 0x00000000
+ 0x00000101
+ 0x00020100
+ 0x000000bb
+ 0x000001d3
+ 0x00000000
+ 0x081c0000
+ 0x00081c00
+ 0x0400081c
+ 0x3b0a0004
+ 0x2f110828
+ 0x283b0a00
+ 0x002f1108
+ 0x08283b0a
+ 0x08002f11
+ 0x00000a0a
+ 0x0800ff4f
+ 0x0a0a080f
+ 0x0800ff4f
+ 0x0a0a080f
+ 0x0800ff4f
+ 0x0203000f
+ 0x110f1100
+ 0x040f110f
+ 0x14000a0a
+ 0x03030a0a
+ 0x00010003
+ 0x03212121
+ 0x00141414
+ 0x00000000
+ 0x03010000
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x00000000
+ 0x00080008
+ 0x00170008
+ 0x00170017
+ 0x00111111
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00ce0000
+ 0x00ce00ce
+ 0x00ce00ce
+ 0x000000ce
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000301
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x80104002
+ 0x00040003
+ 0x00040005
+ 0x00030000
+ 0x00050004
+ 0x00000004
+ 0x00040003
+ 0x00040005
+ 0x38c40000
+ 0x00001c62
+ 0x1c6238c4
+ 0x38c40000
+ 0x00001c62
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02020200
+ 0x00020202
+ 0x00030200
+ 0x00040700
+ 0x00000302
+ 0x02000407
+ 0x00000003
+ 0x00030f04
+ 0x00070004
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x20040020
+ 0x00200400
+ 0x01000400
+ 0x00000b80
+ 0x00000000
+ 0x00000001
+ 0x00000002
+ 0x0000000e
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00bb0000
+ 0x00ea005e
+ 0x00ea0000
+ 0x005e00bb
+ 0x000000ea
+ 0x00bb00ea
+ 0x00ea005e
+ 0x00ea0000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00c30000
+ 0x0000001c
+ 0x001c00c3
+ 0x00c30000
+ 0x0000001c
+ 0x00010001
+ 0x07000001
+ 0x00000707
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00c30000
+ 0x0000001c
+ 0x001c00c3
+ 0x00c30000
+ 0x0000001c
+ 0x00010001
+ 0x07000001
+ 0x00000707
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x00000000
+ 0x00000000
+ 0x18151100
+ 0x0000000c
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x0003a603
+ 0x00550151
+ 0x00000000
+ 0x015103a6
+ 0x00000055
+ 0x0003a600
+ 0x00550151
+ 0x00000000
+ 0x002f0000
+ 0x002f002f
+ 0x01010100
+ 0x01000202
+ 0x0a000002
+ 0x01000f0f
+ 0x00000000
+ 0x00000000
+ 0x00010003
+ 0x00000c03
+ 0x00000100
+ 0x00010000
+ 0x01000000
+ 0x00010000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x04040401
+ 0x01010808
+ 0x04040001
+ 0x0c0c0c04
+ 0x08080808
+ 0x08050103
+ 0x08050103
+ 0x00050103
+ 0x00020202
+ 0x06030600
+ 0x00030603
+ 0x00000000
+ 0x00000000
+ 0x0d000001
+ 0x00010028
+ 0x00010000
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00010100
+ 0x01000000
+ 0x00000001
+ 0x00000303
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x00010300
+ 0x03000100
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00ffff00
+ 0x20200000
+ 0x08000020
+ 0x00001c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00011bd4
+ 0x1c62070c
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00011bd4
+ 0x1c62070c
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00011bd4
+ 0x0202070c
+ 0x03030202
+ 0x00000018
+ 0x00000000
+ 0x00000000
+ 0x00001403
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00030000
+ 0x000f0021
+ 0x000f0021
+ 0x000f0021
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x02090209
+ 0x00050209
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x01000101
+ 0x01010101
+ 0x01000101
+ 0x01000100
+ 0x00010001
+ 0x00010002
+ 0x00020100
+ 0x00000002
+ 0x00000700
+ 0x00000000
+ 0x000038c4
+ 0x00001c62
+ 0x000038c4
+ 0x00001c62
+ 0x000038c4
+ 0x1c621c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00010000
+ 0x00000007
+ 0x81000001
+ 0x0f0003f0
+ 0x3fffffff
+ 0x0f0000a0
+ 0x377ff000
+ 0x0f000020
+ 0x377ff000
+ 0x0f000030
+ 0x377ff000
+ 0x0f0000b0
+ 0x377ff000
+ 0x0f000100
+ 0x377ff000
+ 0x0f000110
+ 0x377ff000
+ 0x0f000010
+ 0x377ff000
+ 0x03000101
+ 0x04323232
+ 0x081c0008
+ 0x00081c00
+ 0x0000001c
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x00000500
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04040000
+ 0x0d000004
+ 0x00000128
+ 0x00000000
+ 0x00030003
+ 0x00000018
+ 0x00000000
+ 0x00000000
+ 0x04060002
+ 0x04010401
+ 0x00080801
+ 0x00020001
+ 0x00080004
+ 0x00000000
+ 0x04040000
+ 0x0c0c0c04
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00030300
+ 0x00000014
+ 0x00000000
+ 0x01010300
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x00000101
+ 0x55555a5a
+ 0x55555a5a
+ 0x55555a5a
+ 0x55555a5a
+ 0x0c0c0001
+ 0x0707000c
+ 0x02020007
+ 0x00000102
+ 0x00030000
+ 0x17030000
+ 0x000f0021
+ 0x000f0021
+ 0x000f0021
+ 0x00000000
+ 0x00000000
+ 0x00000100
+ 0x140a0000
+ 0x000a030a
+ 0x03000a03
+ 0x010a000a
+ 0x00000100
+ 0x01000000
+ 0x00000000
+ 0x00000100
+ 0x1e1a0000
+ 0x10010204
+ 0x07070705
+ 0x20000202
+ 0x00201000
+ 0x00201000
+ 0x04041000
+ 0x12120100
+ 0x00010112
+ 0x004b004a
+ 0x1a030000
+ 0x0102041e
+ 0x34000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x0000c300
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x00c3004d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0100004d
+ 0x00ea00ea
+ 0x080400ea
+ 0x0f081114
+ 0x2800fcc1
+ 0x0a0e2006
+ 0x1114080a
+ 0x00000f08
+ 0x2800fcc1
+ 0x0a0e2006
+ 0x1114080a
+ 0x00000f08
+ 0x2800fcc1
+ 0x0a0e2006
+ 0x0200020a
+ 0x02000200
+ 0x02000200
+ 0x02000200
+ 0x02000200
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x01000300
+ 0x001c6200
+ 0x00011bd4
+ 0x00001c62
+ 0x00011bd4
+ 0x00001c62
+ 0x00011bd4
+ 0x08000000
+ 0x00000100
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000002
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00400320
+ 0x00000040
+ 0x00806420
+ 0x00917531
+ 0x00806420
+ 0x01917531
+ 0x00020003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x0a418820
+ 0x103f0000
+ 0x0000003f
+ 0x00038055
+ 0x03800380
+ 0x03800380
+ 0x00000380
+ 0x42080010
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00400320
+ 0x00000040
+ 0x00008eca
+ 0x00009fdb
+ 0x00008eca
+ 0x01009fdb
+ 0x00020003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x0004a0e6
+ 0x080f0000
+ 0x0000000f
+ 0x00038055
+ 0x03800380
+ 0x03800380
+ 0x00000380
+ 0x42080010
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00400320
+ 0x00000040
+ 0x00008eca
+ 0x00009fdb
+ 0x00008eca
+ 0x01009fdb
+ 0x00020003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x1ee6b16a
+ 0x10000000
+ 0x00000000
+ 0x00038055
+ 0x03800380
+ 0x03800380
+ 0x00000380
+ 0x42080010
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x01000005
+ 0x04000f00
+ 0x00020040
+ 0x00020055
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000050
+ 0x00000000
+ 0x00010100
+ 0x00000601
+ 0x00000000
+ 0x00006400
+ 0x01221102
+ 0x00000000
+ 0x00051f00
+ 0x051f051f
+ 0x051f051f
+ 0x00030003
+ 0x03000300
+ 0x00000300
+ 0x01221102
+ 0x00000000
+ 0x00000000
+ 0x04020000
+ 0x00000001
+ 0x00000011
+ 0x00000011
+ 0x00000400
+ 0x00000000
+ 0x00000011
+ 0x00000011
+ 0x00004410
+ 0x00004410
+ 0x00004410
+ 0x00004410
+ 0x00004410
+ 0x00000011
+ 0x00004410
+ 0x00000011
+ 0x00004410
+ 0x00000011
+ 0x00004410
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04000000
+ 0x00000000
+ 0x00000000
+ 0x00000508
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0xe4000000
+ 0x00000000
+ 0x00000000
+ 0x01010000
+ 0x00000000
+ >;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
Full credits to 'Liviu Dudau' who is the real author for this change.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
1 file changed, 1535 insertions(+)
create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
diff --git a/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
new file mode 100644
index 0000000000..1ee08bb0a1
--- /dev/null
+++ b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
@@ -0,0 +1,1535 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2018 Liviu Dudau <liviu@dudau.co.uk>
+ */
+
+&dmc {
+ rockchip,sdram-params = <
+ 0x2
+ 0xa
+ 0x3
+ 0x2
+ 0x2
+ 0x0
+ 0xf
+ 0xf
+ 1
+ 0x801d181e
+ 0x17050a08
+ 0x00000002
+ 0x00006426
+ 0x0000004c
+ 0x00000000
+ 0x2
+ 0xa
+ 0x3
+ 0x2
+ 0x2
+ 0x0
+ 0xf
+ 0xf
+ 1
+ 0x801d181e
+ 0x17050a08
+ 0x00000002
+ 0x00006426
+ 0x0000004c
+ 0x00000000
+ 933
+ 6
+ 2
+ 13
+ 1
+ 0x00000700
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x0000005e
+ 0x0002d976
+ 0x000003a6
+ 0x0000247a
+ 0x0000005e
+ 0x0002d976
+ 0x000003a6
+ 0x0000247a
+ 0x0000005e
+ 0x0002d976
+ 0x000003a6
+ 0x0100247a
+ 0x00000000
+ 0x00000101
+ 0x00020100
+ 0x000000bb
+ 0x000001d3
+ 0x00000000
+ 0x081c0000
+ 0x00081c00
+ 0x0400081c
+ 0x3b0a0004
+ 0x2f110828
+ 0x283b0a00
+ 0x002f1108
+ 0x08283b0a
+ 0x08002f11
+ 0x00000a0a
+ 0x0800ff4f
+ 0x0a0a080f
+ 0x0800ff4f
+ 0x0a0a080f
+ 0x0800ff4f
+ 0x0203000f
+ 0x110f1100
+ 0x040f110f
+ 0x14000a0a
+ 0x03030a0a
+ 0x00010003
+ 0x03212121
+ 0x00141414
+ 0x00000000
+ 0x03010000
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x00000000
+ 0x00080008
+ 0x00170008
+ 0x00170017
+ 0x00111111
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00ce0000
+ 0x00ce00ce
+ 0x00ce00ce
+ 0x000000ce
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000301
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x80104002
+ 0x00040003
+ 0x00040005
+ 0x00030000
+ 0x00050004
+ 0x00000004
+ 0x00040003
+ 0x00040005
+ 0x38c40000
+ 0x00001c62
+ 0x1c6238c4
+ 0x38c40000
+ 0x00001c62
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02020200
+ 0x00020202
+ 0x00030200
+ 0x00040700
+ 0x00000302
+ 0x02000407
+ 0x00000003
+ 0x00030f04
+ 0x00070004
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x20040020
+ 0x00200400
+ 0x01000400
+ 0x00000b80
+ 0x00000000
+ 0x00000001
+ 0x00000002
+ 0x0000000e
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00bb0000
+ 0x00ea005e
+ 0x00ea0000
+ 0x005e00bb
+ 0x000000ea
+ 0x00bb00ea
+ 0x00ea005e
+ 0x00ea0000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00c30000
+ 0x0000001c
+ 0x001c00c3
+ 0x00c30000
+ 0x0000001c
+ 0x00010001
+ 0x07000001
+ 0x00000707
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00c30000
+ 0x0000001c
+ 0x001c00c3
+ 0x00c30000
+ 0x0000001c
+ 0x00010001
+ 0x07000001
+ 0x00000707
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x00000000
+ 0x00000000
+ 0x18151100
+ 0x0000000c
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x0003a603
+ 0x00550151
+ 0x00000000
+ 0x015103a6
+ 0x00000055
+ 0x0003a600
+ 0x00550151
+ 0x00000000
+ 0x002f0000
+ 0x002f002f
+ 0x01010100
+ 0x01000202
+ 0x0a000002
+ 0x01000f0f
+ 0x00000000
+ 0x00000000
+ 0x00010003
+ 0x00000c03
+ 0x00000100
+ 0x00010000
+ 0x01000000
+ 0x00010000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x04040401
+ 0x01010808
+ 0x04040001
+ 0x0c0c0c04
+ 0x08080808
+ 0x08050103
+ 0x08050103
+ 0x00050103
+ 0x00020202
+ 0x06030600
+ 0x00030603
+ 0x00000000
+ 0x00000000
+ 0x0d000001
+ 0x00010028
+ 0x00010000
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00010100
+ 0x01000000
+ 0x00000001
+ 0x00000303
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x00010300
+ 0x03000100
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00ffff00
+ 0x20200000
+ 0x08000020
+ 0x00001c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00011bd4
+ 0x1c62070c
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00011bd4
+ 0x1c62070c
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00011bd4
+ 0x0202070c
+ 0x03030202
+ 0x00000018
+ 0x00000000
+ 0x00000000
+ 0x00001403
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00030000
+ 0x000f0021
+ 0x000f0021
+ 0x000f0021
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x02090209
+ 0x00050209
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x01000101
+ 0x01010101
+ 0x01000101
+ 0x01000100
+ 0x00010001
+ 0x00010002
+ 0x00020100
+ 0x00000002
+ 0x00000700
+ 0x00000000
+ 0x000038c4
+ 0x00001c62
+ 0x000038c4
+ 0x00001c62
+ 0x000038c4
+ 0x1c621c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00001c62
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00000200
+ 0x00010000
+ 0x00000007
+ 0x81000001
+ 0x0f0003f0
+ 0x3fffffff
+ 0x0f0000a0
+ 0x377ff000
+ 0x0f000020
+ 0x377ff000
+ 0x0f000030
+ 0x377ff000
+ 0x0f0000b0
+ 0x377ff000
+ 0x0f000100
+ 0x377ff000
+ 0x0f000110
+ 0x377ff000
+ 0x0f000010
+ 0x377ff000
+ 0x03000101
+ 0x04323232
+ 0x081c0008
+ 0x00081c00
+ 0x0000001c
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x0e3100c5
+ 0x00000500
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04040000
+ 0x0d000004
+ 0x00000128
+ 0x00000000
+ 0x00030003
+ 0x00000018
+ 0x00000000
+ 0x00000000
+ 0x04060002
+ 0x04010401
+ 0x00080801
+ 0x00020001
+ 0x00080004
+ 0x00000000
+ 0x04040000
+ 0x0c0c0c04
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00030300
+ 0x00000014
+ 0x00000000
+ 0x01010300
+ 0x00000000
+ 0x00000000
+ 0x01000000
+ 0x00000101
+ 0x55555a5a
+ 0x55555a5a
+ 0x55555a5a
+ 0x55555a5a
+ 0x0c0c0001
+ 0x0707000c
+ 0x02020007
+ 0x00000102
+ 0x00030000
+ 0x17030000
+ 0x000f0021
+ 0x000f0021
+ 0x000f0021
+ 0x00000000
+ 0x00000000
+ 0x00000100
+ 0x140a0000
+ 0x000a030a
+ 0x03000a03
+ 0x010a000a
+ 0x00000100
+ 0x01000000
+ 0x00000000
+ 0x00000100
+ 0x1e1a0000
+ 0x10010204
+ 0x07070705
+ 0x20000202
+ 0x00201000
+ 0x00201000
+ 0x04041000
+ 0x12120100
+ 0x00010112
+ 0x004b004a
+ 0x1a030000
+ 0x0102041e
+ 0x34000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x0000c300
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x00c3004d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0000c34d
+ 0x0001001c
+ 0x004d4d07
+ 0x001c00c3
+ 0x4d070001
+ 0x0100004d
+ 0x00ea00ea
+ 0x080400ea
+ 0x0f081114
+ 0x2800fcc1
+ 0x0a0e2006
+ 0x1114080a
+ 0x00000f08
+ 0x2800fcc1
+ 0x0a0e2006
+ 0x1114080a
+ 0x00000f08
+ 0x2800fcc1
+ 0x0a0e2006
+ 0x0200020a
+ 0x02000200
+ 0x02000200
+ 0x02000200
+ 0x02000200
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x01000300
+ 0x001c6200
+ 0x00011bd4
+ 0x00001c62
+ 0x00011bd4
+ 0x00001c62
+ 0x00011bd4
+ 0x08000000
+ 0x00000100
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000002
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x76543210
+ 0x0004c008
+ 0x000001a2
+ 0x00000000
+ 0x00000000
+ 0x00010000
+ 0x01665555
+ 0x00665555
+ 0x00010f00
+ 0x06010200
+ 0x00000003
+ 0x001700c0
+ 0x00cc0101
+ 0x00030066
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04080000
+ 0x04080400
+ 0x08000000
+ 0x0c00c007
+ 0x00000100
+ 0x00000100
+ 0x55555555
+ 0xaaaaaaaa
+ 0x55555555
+ 0xaaaaaaaa
+ 0x00005555
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00200000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x02700270
+ 0x00000270
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x00800080
+ 0x01a20080
+ 0x00000003
+ 0x00000000
+ 0x00030000
+ 0x00000200
+ 0x00000000
+ 0x51315152
+ 0xc0013150
+ 0x020000c0
+ 0x00100001
+ 0x07064208
+ 0x000f0c18
+ 0x01000140
+ 0x00000c20
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00400320
+ 0x00000040
+ 0x00806420
+ 0x00917531
+ 0x00806420
+ 0x01917531
+ 0x00020003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x0a418820
+ 0x103f0000
+ 0x0000003f
+ 0x00038055
+ 0x03800380
+ 0x03800380
+ 0x00000380
+ 0x42080010
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00400320
+ 0x00000040
+ 0x00008eca
+ 0x00009fdb
+ 0x00008eca
+ 0x01009fdb
+ 0x00020003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x0004a0e6
+ 0x080f0000
+ 0x0000000f
+ 0x00038055
+ 0x03800380
+ 0x03800380
+ 0x00000380
+ 0x42080010
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00800000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00400320
+ 0x00000040
+ 0x00008eca
+ 0x00009fdb
+ 0x00008eca
+ 0x01009fdb
+ 0x00020003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x000556aa
+ 0x000aaaaa
+ 0x000aa955
+ 0x00055555
+ 0x000b3133
+ 0x0004cd33
+ 0x0004cecc
+ 0x000b32cc
+ 0x1ee6b16a
+ 0x10000000
+ 0x00000000
+ 0x00038055
+ 0x03800380
+ 0x03800380
+ 0x00000380
+ 0x42080010
+ 0x00000003
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000001
+ 0x00000000
+ 0x01000005
+ 0x04000f00
+ 0x00020040
+ 0x00020055
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000050
+ 0x00000000
+ 0x00010100
+ 0x00000601
+ 0x00000000
+ 0x00006400
+ 0x01221102
+ 0x00000000
+ 0x00051f00
+ 0x051f051f
+ 0x051f051f
+ 0x00030003
+ 0x03000300
+ 0x00000300
+ 0x01221102
+ 0x00000000
+ 0x00000000
+ 0x04020000
+ 0x00000001
+ 0x00000011
+ 0x00000011
+ 0x00000400
+ 0x00000000
+ 0x00000011
+ 0x00000011
+ 0x00004410
+ 0x00004410
+ 0x00004410
+ 0x00004410
+ 0x00004410
+ 0x00000011
+ 0x00004410
+ 0x00000011
+ 0x00004410
+ 0x00000011
+ 0x00004410
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x04000000
+ 0x00000000
+ 0x00000000
+ 0x00000508
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0x00000000
+ 0xe4000000
+ 0x00000000
+ 0x00000000
+ 0x01010000
+ 0x00000000
+ >;
+};
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 10/14] rockchip: rk3399: Add Nanopi M4 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add initial support for Nanopi M4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A
Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Refine nanopi4 differences"
(sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +++
arch/arm/dts/rk3399-nanopi-m4.dts | 66 +++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
configs/nanopi-m4-rk3399_defconfig | 58 ++++++++++++++++++++
5 files changed, 138 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
create mode 100644 configs/nanopi-m4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6d55b0caf8..d2ac26b556 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
new file mode 100644
index 0000000000..1173d496ec
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
new file mode 100644
index 0000000000..60358ab8c7
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi M4";
+ compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb2: vcc5v0-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb2";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 07ee8ce92c..ae43805a6a 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+NANOPI-M4
+M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S: Maintained
+F: configs/nanopi-m4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
+
ORANGEPI-RK3399
M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
S: Maintained
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
new file mode 100644
index 0000000000..be36a28315
--- /dev/null
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 10/14] rockchip: rk3399: Add Nanopi M4 board support
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add initial support for Nanopi M4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A
Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Refine nanopi4 differences"
(sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +++
arch/arm/dts/rk3399-nanopi-m4.dts | 66 +++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
configs/nanopi-m4-rk3399_defconfig | 58 ++++++++++++++++++++
5 files changed, 138 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
create mode 100644 configs/nanopi-m4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6d55b0caf8..d2ac26b556 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
new file mode 100644
index 0000000000..1173d496ec
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
new file mode 100644
index 0000000000..60358ab8c7
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi M4";
+ compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb2: vcc5v0-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb2";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 07ee8ce92c..ae43805a6a 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+NANOPI-M4
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/nanopi-m4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
+
ORANGEPI-RK3399
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
new file mode 100644
index 0000000000..be36a28315
--- /dev/null
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 11/14] rockchip: rk3399: Add Nanopc T4 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add initial support for Nanopc T4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A
Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Note: Hardware on the way, since it shared same DDR with Nanopi M4
I'm confident it will boot.
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 ++
arch/arm/dts/rk3399-nanopc-t4.dts | 91 +++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 6 ++
configs/nanopc-t4-rk3399_defconfig | 58 +++++++++++++++
5 files changed, 163 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
create mode 100644 configs/nanopc-t4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d2ac26b556..e048565bb6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-nanopc-t4.dtb \
rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
new file mode 100644
index 0000000000..1173d496ec
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
new file mode 100644
index 0000000000..84433cf02b
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPC-T4";
+ compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+ vcc12v0_sys: vcc12v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <12000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-name = "vcc12v0_sys";
+ };
+
+ vcc5v0_host0: vcc5v0-host0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc5v0_host0";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx>;
+ };
+};
+
+&pinctrl {
+ ir {
+ ir_rx: ir-rx {
+ /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
+ rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdhci {
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+ vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index ae43805a6a..5917abb9c1 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+NANOPC-T4
+M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S: Maintained
+F: configs/nanopic-t4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
+
NANOPI-M4
M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
S: Maintained
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
new file mode 100644
index 0000000000..7ba4f85485
--- /dev/null
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 11/14] rockchip: rk3399: Add Nanopc T4 board support
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add initial support for Nanopc T4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A
Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Note: Hardware on the way, since it shared same DDR with Nanopi M4
I'm confident it will boot.
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 ++
arch/arm/dts/rk3399-nanopc-t4.dts | 91 +++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 6 ++
configs/nanopc-t4-rk3399_defconfig | 58 +++++++++++++++
5 files changed, 163 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
create mode 100644 configs/nanopc-t4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d2ac26b556..e048565bb6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-nanopc-t4.dtb \
rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
new file mode 100644
index 0000000000..1173d496ec
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
new file mode 100644
index 0000000000..84433cf02b
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPC-T4";
+ compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+ vcc12v0_sys: vcc12v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <12000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-name = "vcc12v0_sys";
+ };
+
+ vcc5v0_host0: vcc5v0-host0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc5v0_host0";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx>;
+ };
+};
+
+&pinctrl {
+ ir {
+ ir_rx: ir-rx {
+ /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
+ rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdhci {
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+ vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index ae43805a6a..5917abb9c1 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+NANOPC-T4
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/nanopic-t4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
+
NANOPI-M4
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
new file mode 100644
index 0000000000..7ba4f85485
--- /dev/null
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 12/14] rockchip: rk3399: Add Nanopi NEO4 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add initial support for Nanopi NEO4 board.
Specification
- Rockchip RK3399
- 1GB DDR3-1866
- SD card slot
- eMMC Socket
- RTL8211E 1Gbps
- AP6212 WiFI/BT
- HDMI In/Out, DP, MIPI CSI
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 5V/3A
Commit details of rk3399-nanopi-neo4.dts sync from Linux:
"arm64: dts: rockchip: Add Nanopi NEO4 initial support"
(sha1: 092470b537f19788d957aed12d835a179b606014)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +++
arch/arm/dts/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
configs/nanopi-neo4-rk3399_defconfig | 58 +++++++++++++++++++++
5 files changed, 121 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
create mode 100644 configs/nanopi-neo4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e048565bb6..ede7da23fb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-gru-bob.dtb \
rk3399-nanopc-t4.dtb \
rk3399-nanopi-m4.dtb \
+ rk3399-nanopi-neo4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
new file mode 100644
index 0000000000..7bddc3acdb
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts
new file mode 100644
index 0000000000..195410b089
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-neo4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+/dts-v1/;
+
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyARM NanoPi NEO4";
+ compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 5917abb9c1..ed58861820 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -18,6 +18,12 @@ S: Maintained
F: configs/nanopi-m4-rk3399_defconfig
F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
+NANOPI-NEO4
+M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S: Maintained
+F: configs/nanopi-neo4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
+
ORANGEPI-RK3399
M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
S: Maintained
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
new file mode 100644
index 0000000000..eb9d81ae87
--- /dev/null
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 12/14] rockchip: rk3399: Add Nanopi NEO4 board support
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add initial support for Nanopi NEO4 board.
Specification
- Rockchip RK3399
- 1GB DDR3-1866
- SD card slot
- eMMC Socket
- RTL8211E 1Gbps
- AP6212 WiFI/BT
- HDMI In/Out, DP, MIPI CSI
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 5V/3A
Commit details of rk3399-nanopi-neo4.dts sync from Linux:
"arm64: dts: rockchip: Add Nanopi NEO4 initial support"
(sha1: 092470b537f19788d957aed12d835a179b606014)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +++
arch/arm/dts/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
configs/nanopi-neo4-rk3399_defconfig | 58 +++++++++++++++++++++
5 files changed, 121 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
create mode 100644 configs/nanopi-neo4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e048565bb6..ede7da23fb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-gru-bob.dtb \
rk3399-nanopc-t4.dtb \
rk3399-nanopi-m4.dtb \
+ rk3399-nanopi-neo4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
new file mode 100644
index 0000000000..7bddc3acdb
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts
new file mode 100644
index 0000000000..195410b089
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-neo4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyARM NanoPi NEO4";
+ compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 5917abb9c1..ed58861820 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -18,6 +18,12 @@ S: Maintained
F: configs/nanopi-m4-rk3399_defconfig
F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
+NANOPI-NEO4
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/nanopi-neo4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
+
ORANGEPI-RK3399
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
new file mode 100644
index 0000000000..eb9d81ae87
--- /dev/null
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 13/14] rockchip: rk3399: Add Rockpro64 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: Paul Kocialkowski,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Add initial support for Rockpro64 board.
Specification
- Rockchip RK3399
- 2/4GB Dual-Channel LPDDR3
- SD card slot
- eMMC socket
- 128Mb SPI Flash
- Gigabit ethernet
- PCIe 4X slot
- WiFI/BT module socket
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A
Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: rockpro64 dts add usb regulator"
(sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb)
'Akash' has sent an initial patch before, so I keep him as board
maintainer and I'm co-maintainer based on our conversation.
Cc: Paul Kocialkowski <paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 7 +
configs/rockpro64-rk3399_defconfig | 58 ++
5 files changed, 784 insertions(+)
create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
create mode 100644 configs/rockpro64-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ede7da23fb..23a9807444 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
rk3399-rock960.dtb \
+ rk3399-rockpro64.dtb \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
new file mode 100644
index 0000000000..7bddc3acdb
--- /dev/null
+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
new file mode 100644
index 0000000000..1f2394e058
--- /dev/null
+++ b/arch/arm/dts/rk3399-rockpro64.dts
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 RockPro64";
+ compatible = "pine64,rockpro64", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index ed58861820..c724162ef3 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -30,3 +30,10 @@ S: Maintained
F: configs/orangepi-rk3399_defconfig
F: arch/arm/dts/rk3399-u-boot.dtsi
F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
+
+ROCKPRO64
+M: Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
+M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S: Maintained
+F: configs/rockpro64-rk3399_defconfig
+F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
new file mode 100644
index 0000000000..3d0c7d0c6d
--- /dev/null
+++ b/configs/rockpro64-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 13/14] rockchip: rk3399: Add Rockpro64 board support
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Add initial support for Rockpro64 board.
Specification
- Rockchip RK3399
- 2/4GB Dual-Channel LPDDR3
- SD card slot
- eMMC socket
- 128Mb SPI Flash
- Gigabit ethernet
- PCIe 4X slot
- WiFI/BT module socket
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A
Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: rockpro64 dts add usb regulator"
(sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb)
'Akash' has sent an initial patch before, so I keep him as board
maintainer and I'm co-maintainer based on our conversation.
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++++++++++++++++
board/rockchip/evb_rk3399/MAINTAINERS | 7 +
configs/rockpro64-rk3399_defconfig | 58 ++
5 files changed, 784 insertions(+)
create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
create mode 100644 configs/rockpro64-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ede7da23fb..23a9807444 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
rk3399-rock960.dtb \
+ rk3399-rockpro64.dtb \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
new file mode 100644
index 0000000000..7bddc3acdb
--- /dev/null
+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
new file mode 100644
index 0000000000..1f2394e058
--- /dev/null
+++ b/arch/arm/dts/rk3399-rockpro64.dts
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 RockPro64";
+ compatible = "pine64,rockpro64", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic at 1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator at 40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator at 41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc at 22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index ed58861820..c724162ef3 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -30,3 +30,10 @@ S: Maintained
F: configs/orangepi-rk3399_defconfig
F: arch/arm/dts/rk3399-u-boot.dtsi
F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
+
+ROCKPRO64
+M: Akash Gajjar <akash@openedev.com>
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/rockpro64-rk3399_defconfig
+F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
new file mode 100644
index 0000000000..3d0c7d0c6d
--- /dev/null
+++ b/configs/rockpro64-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v2 14/14] doc: rockchip: Add global doc for rk3399 build/flash
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 10:56 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Jagan Teki, u-boot-0aAXYlwwYIKGBzrmiIFOJg
Since rockchip have an individual doc/README.rockchip, it would
be better to update the same instead of maintaining it separately
in board files.
So, add the documentation for rk3399
- procedure to build for Rockchip miniloader and
U-Boot SPL options
- procedure to boot from SD for Rockchip miniloader and
U-Boot SPL options
- Add boot logs of each option, so-that it would help for future
boards porting
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
doc/README.rockchip | 209 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 208 insertions(+), 1 deletion(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index ec10ebbc26..e8f6a2dfba 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -88,10 +88,68 @@ One RV3188 baord is supported:
For example:
+1. To build RK3288 board:
+
CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all
-(or you can use another cross compiler if you prefer)
+ (or you can use another cross compiler if you prefer)
+
+2. To build RK3399 board:
+
+ Option 1: Package the image with Rockchip miniloader:
+
+ - Compile U-Boot
+
+ => cd /path/to/u-boot
+ => make nanopi-neo4-rk3399_defconfig
+ => make
+ => make u-boot.itb
+
+ - Get the rkbin
+
+ => git clone https://github.com/rockchip-linux/rkbin.git
+
+ - Create trust.img
+
+ => cd /path/to/rkbin
+ => ./tools/trust_merger RKTRUST/RK3399TRUST.ini
+
+ - Create uboot.img
+
+ => cd /path/to/rkbin
+ => ./tools/loaderimage --pack --uboot /path/to/u-boot/u-boot-dtb.bin uboot.img
+
+ (Get trust.img and uboot.img)
+ Option 2: Package the image with SPL:
+
+ - We need the Python elftools.elf.elffile library for make_fit_atf.py to work
+
+ => sudo apt-get install python-pyelftools
+
+ - Export cross compiler path for aarch64
+
+ - Compile ATF
+
+ => git clone https://github.com/ARM-software/arm-trusted-firmware.git
+ => cd arm-trusted-firmware
+
+ (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-)
+ => make realclean
+ => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
+
+ (copy bl31.elf U-Boot root dir)
+ => cp build/rk3399/release/bl31/bl31.elf /path/to/u-boot
+
+ - Compile U-Boot
+
+ => cd /path/to/u-boot
+ => make orangepi-rk3399_defconfig
+ => make
+ => make u-boot.itb
+
+ (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get
+ spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL)
Writing to the board with USB
=============================
@@ -225,6 +283,153 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
truncate -s %2048 u-boot.bin
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+Booting from an SD card on RK3399
+=================================
+
+To write an image that boots from an SD card (assumed to be /dev/sdc):
+
+Option 1: Package the image with Rockchip miniloader:
+
+ - Create idbloader.img
+
+ => cd /path/to/u-boot
+ => ./tools/mkimage -n rk3399 -T rksd -d /path/to/rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin idbloader.img
+ => cat /path/to/rkbin/bin/rk33/rk3399_miniloader_v1.19.bin >> idbloader.img
+
+ - Write idbloader.img at 64 sector
+
+ => sudo dd if=idbloader.img of=/dev/sdc seek=64
+
+ - Write trust.img at 24576
+
+ => sudo dd if=trust.img of=/dev/sdc seek=24576
+
+ - Write uboot.img at 16384 sector
+
+ => sudo dd if=uboot.img of=/dev/sdc seek=16384
+ => sync
+
+Put this SD (or micro-SD) card into your board and reset it. You should see
+something like:
+
+DDR Version 1.20 20190314
+In
+Channel 0: DDR3, 933MHz
+Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
+no stride
+ch 0 ddrconfig = 0x101, ddrsize = 0x20
+pmugrf_os_reg[2] = 0x10006281, stride = 0x17
+OUT
+Boot1: 2019-03-14, version: 1.19
+CPUId = 0x0
+ChipType = 0x10, 239
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
+mmc: ERROR: Card did not respond to voltage select!
+emmc reinit
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
+mmc: ERROR: Card did not respond to voltage select!
+emmc reinit
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
+mmc: ERROR: Card did not respond to voltage select!
+SdmmcInit=2 1
+mmc0:cmd5,20
+SdmmcInit=0 0
+BootCapSize=0
+UserCapSize=60543MB
+FwPartOffset=2000 , 0
+StorageInit ok = 45266
+SecureMode = 0
+SecureInit read PBA: 0x4
+SecureInit read PBA: 0x404
+SecureInit read PBA: 0x804
+SecureInit read PBA: 0xc04
+SecureInit read PBA: 0x1004
+SecureInit read PBA: 0x1404
+SecureInit read PBA: 0x1804
+SecureInit read PBA: 0x1c04
+SecureInit ret = 0, SecureMode = 0
+atags_set_bootdev: ret:(0)
+GPT 0x3380ec0 signature is wrong
+recovery gpt...
+GPT 0x3380ec0 signature is wrong
+recovery gpt fail!
+LoadTrust Addr:0x4000
+No find bl30.bin
+Load uboot, ReadLba = 2000
+hdr 0000000003380880 + 0x0:0x88,0x41,0x3e,0x97,0xe6,0x61,0x54,0x23,0xe9,0x5a,0xd1,0x2b,0xdc,0x2f,0xf9,0x35,
+
+Load OK, addr=0x200000, size=0x9c9c0
+RunBL31 0x10000
+NOTICE: BL31: v1.3(debug):370ab80
+NOTICE: BL31: Built : 09:23:41, Mar 4 2019
+NOTICE: BL31: Rockchip release version: v1.1
+INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
+INFO: Using opteed sec cpu_context!
+INFO: boot cpu mask: 0
+INFO: plat_rockchip_pmu_init(1181): pd status 3e
+INFO: BL31: Initializing runtime services
+INFO: BL31: Initializing BL32
+INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
+
+INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
+
+INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
+INFO: BL31: Preparing for EL3 exit to normal world
+INFO: Entry point address = 0x200000
+INFO: SPSR = 0x3c9
+
+
+U-Boot 2019.04-rc4-00136-gfd121f9641-dirty (Apr 16 2019 - 14:02:47 +0530)
+
+Model: FriendlyARM NanoPi NEO4
+DRAM: 1022 MiB
+MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
+Loading Environment from MMC... *** Warning - bad CRC, using default environment
+
+In: serial@ff1a0000
+Out: serial@ff1a0000
+Err: serial@ff1a0000
+Model: FriendlyARM NanoPi NEO4
+Net: eth0: ethernet@fe300000
+Hit any key to stop autoboot: 0
+=>
+
+Option 2: Package the image with SPL:
+
+ - Prefix rk3399 header to SPL image
+
+ => cd /path/to/u-boot
+ => ./tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl-dtb.bin out
+
+ - Write prefixed SPL at 64th sector
+
+ => sudo dd if=out of=/dev/sdc seek=64
+
+ - Write U-Boot proper at 16384 sector
+
+ => sudo dd if=u-boot.itb of=/dev/sdc seek=16384
+ => sync
+
+Put this SD (or micro-SD) card into your board and reset it. You should see
+something like:
+
+U-Boot SPL board init
+Trying to boot from MMC1
+
+
+U-Boot 2019.01-00004-g14db5ee998 (Mar 11 2019 - 13:18:41 +0530)
+
+Model: Orange Pi RK3399 Board
+DRAM: 2 GiB
+MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
+Loading Environment from MMC... OK
+In: serial@ff1a0000
+Out: serial@ff1a0000
+Err: serial@ff1a0000
+Model: Orange Pi RK3399 Board
+Net: eth0: ethernet@fe300000
+Hit any key to stop autoboot: 0
+=>
Using fastboot on rk3288
========================
@@ -385,5 +590,7 @@ There are some documents about partitions in the links below.
http://rockchip.wikidot.com/partitions
--
+Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+11 Mar 2019
Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
24 June 2015
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 14/14] doc: rockchip: Add global doc for rk3399 build/flash
@ 2019-04-16 10:56 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-16 10:56 UTC (permalink / raw)
To: u-boot
Since rockchip have an individual doc/README.rockchip, it would
be better to update the same instead of maintaining it separately
in board files.
So, add the documentation for rk3399
- procedure to build for Rockchip miniloader and
U-Boot SPL options
- procedure to boot from SD for Rockchip miniloader and
U-Boot SPL options
- Add boot logs of each option, so-that it would help for future
boards porting
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
doc/README.rockchip | 209 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 208 insertions(+), 1 deletion(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index ec10ebbc26..e8f6a2dfba 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -88,10 +88,68 @@ One RV3188 baord is supported:
For example:
+1. To build RK3288 board:
+
CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig all
-(or you can use another cross compiler if you prefer)
+ (or you can use another cross compiler if you prefer)
+
+2. To build RK3399 board:
+
+ Option 1: Package the image with Rockchip miniloader:
+
+ - Compile U-Boot
+
+ => cd /path/to/u-boot
+ => make nanopi-neo4-rk3399_defconfig
+ => make
+ => make u-boot.itb
+
+ - Get the rkbin
+
+ => git clone https://github.com/rockchip-linux/rkbin.git
+
+ - Create trust.img
+
+ => cd /path/to/rkbin
+ => ./tools/trust_merger RKTRUST/RK3399TRUST.ini
+
+ - Create uboot.img
+
+ => cd /path/to/rkbin
+ => ./tools/loaderimage --pack --uboot /path/to/u-boot/u-boot-dtb.bin uboot.img
+
+ (Get trust.img and uboot.img)
+ Option 2: Package the image with SPL:
+
+ - We need the Python elftools.elf.elffile library for make_fit_atf.py to work
+
+ => sudo apt-get install python-pyelftools
+
+ - Export cross compiler path for aarch64
+
+ - Compile ATF
+
+ => git clone https://github.com/ARM-software/arm-trusted-firmware.git
+ => cd arm-trusted-firmware
+
+ (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-)
+ => make realclean
+ => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
+
+ (copy bl31.elf U-Boot root dir)
+ => cp build/rk3399/release/bl31/bl31.elf /path/to/u-boot
+
+ - Compile U-Boot
+
+ => cd /path/to/u-boot
+ => make orangepi-rk3399_defconfig
+ => make
+ => make u-boot.itb
+
+ (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get
+ spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL)
Writing to the board with USB
=============================
@@ -225,6 +283,153 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
truncate -s %2048 u-boot.bin
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+Booting from an SD card on RK3399
+=================================
+
+To write an image that boots from an SD card (assumed to be /dev/sdc):
+
+Option 1: Package the image with Rockchip miniloader:
+
+ - Create idbloader.img
+
+ => cd /path/to/u-boot
+ => ./tools/mkimage -n rk3399 -T rksd -d /path/to/rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin idbloader.img
+ => cat /path/to/rkbin/bin/rk33/rk3399_miniloader_v1.19.bin >> idbloader.img
+
+ - Write idbloader.img at 64 sector
+
+ => sudo dd if=idbloader.img of=/dev/sdc seek=64
+
+ - Write trust.img at 24576
+
+ => sudo dd if=trust.img of=/dev/sdc seek=24576
+
+ - Write uboot.img at 16384 sector
+
+ => sudo dd if=uboot.img of=/dev/sdc seek=16384
+ => sync
+
+Put this SD (or micro-SD) card into your board and reset it. You should see
+something like:
+
+DDR Version 1.20 20190314
+In
+Channel 0: DDR3, 933MHz
+Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
+no stride
+ch 0 ddrconfig = 0x101, ddrsize = 0x20
+pmugrf_os_reg[2] = 0x10006281, stride = 0x17
+OUT
+Boot1: 2019-03-14, version: 1.19
+CPUId = 0x0
+ChipType = 0x10, 239
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
+mmc: ERROR: Card did not respond to voltage select!
+emmc reinit
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
+mmc: ERROR: Card did not respond to voltage select!
+emmc reinit
+mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
+mmc: ERROR: Card did not respond to voltage select!
+SdmmcInit=2 1
+mmc0:cmd5,20
+SdmmcInit=0 0
+BootCapSize=0
+UserCapSize=60543MB
+FwPartOffset=2000 , 0
+StorageInit ok = 45266
+SecureMode = 0
+SecureInit read PBA: 0x4
+SecureInit read PBA: 0x404
+SecureInit read PBA: 0x804
+SecureInit read PBA: 0xc04
+SecureInit read PBA: 0x1004
+SecureInit read PBA: 0x1404
+SecureInit read PBA: 0x1804
+SecureInit read PBA: 0x1c04
+SecureInit ret = 0, SecureMode = 0
+atags_set_bootdev: ret:(0)
+GPT 0x3380ec0 signature is wrong
+recovery gpt...
+GPT 0x3380ec0 signature is wrong
+recovery gpt fail!
+LoadTrust Addr:0x4000
+No find bl30.bin
+Load uboot, ReadLba = 2000
+hdr 0000000003380880 + 0x0:0x88,0x41,0x3e,0x97,0xe6,0x61,0x54,0x23,0xe9,0x5a,0xd1,0x2b,0xdc,0x2f,0xf9,0x35,
+
+Load OK, addr=0x200000, size=0x9c9c0
+RunBL31 0x10000
+NOTICE: BL31: v1.3(debug):370ab80
+NOTICE: BL31: Built : 09:23:41, Mar 4 2019
+NOTICE: BL31: Rockchip release version: v1.1
+INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
+INFO: Using opteed sec cpu_context!
+INFO: boot cpu mask: 0
+INFO: plat_rockchip_pmu_init(1181): pd status 3e
+INFO: BL31: Initializing runtime services
+INFO: BL31: Initializing BL32
+INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
+
+INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
+
+INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
+INFO: BL31: Preparing for EL3 exit to normal world
+INFO: Entry point address = 0x200000
+INFO: SPSR = 0x3c9
+
+
+U-Boot 2019.04-rc4-00136-gfd121f9641-dirty (Apr 16 2019 - 14:02:47 +0530)
+
+Model: FriendlyARM NanoPi NEO4
+DRAM: 1022 MiB
+MMC: dwmmc at fe310000: 2, dwmmc at fe320000: 1, sdhci at fe330000: 0
+Loading Environment from MMC... *** Warning - bad CRC, using default environment
+
+In: serial at ff1a0000
+Out: serial at ff1a0000
+Err: serial at ff1a0000
+Model: FriendlyARM NanoPi NEO4
+Net: eth0: ethernet at fe300000
+Hit any key to stop autoboot: 0
+=>
+
+Option 2: Package the image with SPL:
+
+ - Prefix rk3399 header to SPL image
+
+ => cd /path/to/u-boot
+ => ./tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl-dtb.bin out
+
+ - Write prefixed SPL at 64th sector
+
+ => sudo dd if=out of=/dev/sdc seek=64
+
+ - Write U-Boot proper at 16384 sector
+
+ => sudo dd if=u-boot.itb of=/dev/sdc seek=16384
+ => sync
+
+Put this SD (or micro-SD) card into your board and reset it. You should see
+something like:
+
+U-Boot SPL board init
+Trying to boot from MMC1
+
+
+U-Boot 2019.01-00004-g14db5ee998 (Mar 11 2019 - 13:18:41 +0530)
+
+Model: Orange Pi RK3399 Board
+DRAM: 2 GiB
+MMC: dwmmc at fe310000: 2, dwmmc at fe320000: 1, sdhci at fe330000: 0
+Loading Environment from MMC... OK
+In: serial at ff1a0000
+Out: serial at ff1a0000
+Err: serial at ff1a0000
+Model: Orange Pi RK3399 Board
+Net: eth0: ethernet at fe300000
+Hit any key to stop autoboot: 0
+=>
Using fastboot on rk3288
========================
@@ -385,5 +590,7 @@ There are some documents about partitions in the links below.
http://rockchip.wikidot.com/partitions
--
+Jagan Teki <jagan@amarulasolutions.com>
+11 Mar 2019
Simon Glass <sjg@chromium.org>
24 June 2015
--
2.18.0.321.gffc6fa0e3
^ permalink raw reply related [flat|nested] 68+ messages in thread
* Re: [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 11:10 ` Robin Murphy
-1 siblings, 0 replies; 68+ messages in thread
From: Robin Murphy @ 2019-04-16 11:10 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
On 16/04/2019 11:56, Jagan Teki wrote:
> sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
> indeed failed to detect the sdcard on the board with below error
>
> Card did not respond to voltage select!
>
> So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
> is already defined in rk3399.dts so make use of same like
> other boards.
I guess the U-Boot dwmmc driver doesn't support using a GPIO? The reason
we do this for Linux is that the dedicated function is not compatible
with runtime power management - once we see that no card is present and
suspend the idle controller, the CD logic is also powered off and thus
no longer capable of generating the interrupt necessary to wake
everything up again. The GPIO function of the same pin, however, is in
an always-on power domain so is able to do the right thing.
So it's not "wrong" as such, but this change should be fine for U-Boot
as long as it never turns off PD_SD itself.
Robin.
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> ---
> arch/arm/dts/rk3399-nanopi4.dtsi | 6 +-----
> 1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
> index d325e11728..5dc8a8de16 100644
> --- a/arch/arm/dts/rk3399-nanopi4.dtsi
> +++ b/arch/arm/dts/rk3399-nanopi4.dtsi
> @@ -521,10 +521,6 @@
> };
>
> sdmmc {
> - sdmmc0_det_l: sdmmc0-det-l {
> - rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> -
> sdmmc0_pwr_h: sdmmc0-pwr-h {
> rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> @@ -582,7 +578,7 @@
> cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> disable-wp;
> pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
> + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
> sd-uhs-sdr104;
> vmmc-supply = <&vcc3v0_sd>;
> vqmmc-supply = <&vcc_sdio>;
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
@ 2019-04-16 11:10 ` Robin Murphy
0 siblings, 0 replies; 68+ messages in thread
From: Robin Murphy @ 2019-04-16 11:10 UTC (permalink / raw)
To: u-boot
On 16/04/2019 11:56, Jagan Teki wrote:
> sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
> indeed failed to detect the sdcard on the board with below error
>
> Card did not respond to voltage select!
>
> So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
> is already defined in rk3399.dts so make use of same like
> other boards.
I guess the U-Boot dwmmc driver doesn't support using a GPIO? The reason
we do this for Linux is that the dedicated function is not compatible
with runtime power management - once we see that no card is present and
suspend the idle controller, the CD logic is also powered off and thus
no longer capable of generating the interrupt necessary to wake
everything up again. The GPIO function of the same pin, however, is in
an always-on power domain so is able to do the right thing.
So it's not "wrong" as such, but this change should be fine for U-Boot
as long as it never turns off PD_SD itself.
Robin.
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/dts/rk3399-nanopi4.dtsi | 6 +-----
> 1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
> index d325e11728..5dc8a8de16 100644
> --- a/arch/arm/dts/rk3399-nanopi4.dtsi
> +++ b/arch/arm/dts/rk3399-nanopi4.dtsi
> @@ -521,10 +521,6 @@
> };
>
> sdmmc {
> - sdmmc0_det_l: sdmmc0-det-l {
> - rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> -
> sdmmc0_pwr_h: sdmmc0-pwr-h {
> rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> @@ -582,7 +578,7 @@
> cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> disable-wp;
> pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
> + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
> sd-uhs-sdr104;
> vmmc-supply = <&vcc3v0_sd>;
> vqmmc-supply = <&vcc_sdio>;
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 00/14] rockchip: Add new rk3399 boards
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 11:58 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 11:58 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip, linux-amarula, u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> This series is combination of previous version[1] plus new rk3399
> boards addition.
Thanks for following-up on this series!
> Overall this series add support below rk3399 boards
> - Orangepi RK3399
> - Nanopc T4
> - Nanopi M4
> - Nanopi NEO4
> - Orangepi RK3399
> - Rockpro64
>
> All the respective dts(i) files are synced from Linux 5.1-rc2 and few
> dts(i) from linux-next.
>
> Nanopi NEO4, Rockpro64 are supporting via Rockchip miniloader, and rest
> support both Rockchip miniloader along with U-Boot SPL.
>
> - Rockpro64, is not possible to boot via U-Boot SPL since it has dependency with LPDDR4
> code which is work-in-progress and as soon it arrived in mailing list, will update the
> same with ddr dtsi.
> - Nanopi NEO4 has some ddr issue with[2] rk3399-sdram-ddr3-1866.dtsi,
> will update the same with U-Boot SPL once it is fixed.
Has the status evolved since? It looks like both have SPL enabled in
this series. If the SPL doesn't support DRAM configuration yet, it
should probably be explicitly disabled.
Cheers,
Paul
> patch 1, 2: Sync rk3399 dtsi files from Linux 5.1-rc2
>
> patch 3: Create global rk3399-u-boot.dtsi
>
> patch 4: move default SPL_FIT_GENERATOR to Kconfig
>
> patch 5: Move common rk3399 configs into Kconfig
>
> patch 6: Add Orangepi RK3399 support
>
> patch 7: Sync rk3399-nanopi4.dtsi from Linux
>
> patch 8: Fix for sdmmc CD pin
>
> patch 9: Add 4GB LPDDR3-1866 ddr dtsi
>
> patch 10: Add Nanopi M4 support
>
> patch 11: Add Nanopc T4 support
>
> patch 12: Add Nanopi NEO4 support
>
> patch 13: Add Rockpro64 support
>
> patch 14: Global document for build/flash
>
> [2] https://marc.info/?l=u-boot&m=154671835328469&w=2
> [1] https://patchwork.ozlabs.org/patch/1054208/
>
> Any inputs?
> Jagan.
>
> Jagan Teki (14):
> rockchip: dts: rk3399: Sync rk3399-opp from Linux
> rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
> rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
> Kconfig: Add default SPL_FIT_GENERATOR for rockchip
> arm: rockchip: rk3399: Move common configs in Kconfig
> rockchip: rk3399: Add Orangepi RK3399 support
> rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
> rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
> rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings
> rockchip: rk3399: Add Nanopi M4 board support
> rockchip: rk3399: Add Nanopc T4 board support
> rockchip: rk3399: Add Nanopi NEO4 board support
> rockchip: rk3399: Add Rockpro64 board support
> doc: rockchip: Add global doc for rk3399 build/flash
>
> Kconfig | 1 +
> arch/arm/dts/Makefile | 5 +
> arch/arm/dts/rk3399-evb.dts | 1 -
> arch/arm/dts/rk3399-firefly.dts | 1 -
> arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-nanopc-t4.dts | 91 +
> arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-nanopi-m4.dts | 66 +
> arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +
> arch/arm/dts/rk3399-nanopi-neo4.dts | 50 +
> arch/arm/dts/rk3399-nanopi4.dtsi | 699 ++++++++
> arch/arm/dts/rk3399-opp.dtsi | 133 ++
> arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++
> arch/arm/dts/rk3399-puma.dtsi | 1 -
> arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
> arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++
> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
> arch/arm/dts/rk3399-u-boot.dtsi | 8 +
> arch/arm/dts/rk3399.dtsi | 6 +
> arch/arm/mach-rockchip/Kconfig | 16 +
> board/rockchip/evb_rk3399/MAINTAINERS | 32 +
> configs/chromebook_bob_defconfig | 17 -
> configs/evb-rk3399_defconfig | 17 -
> configs/ficus-rk3399_defconfig | 17 -
> configs/firefly-rk3399_defconfig | 17 -
> configs/nanopc-t4-rk3399_defconfig | 58 +
> configs/nanopi-m4-rk3399_defconfig | 58 +
> configs/nanopi-neo4-rk3399_defconfig | 58 +
> configs/orangepi-rk3399_defconfig | 58 +
> configs/puma-rk3399_defconfig | 16 -
> configs/rock960-rk3399_defconfig | 17 -
> configs/rockpro64-rk3399_defconfig | 58 +
> doc/README.rockchip | 209 ++-
> 34 files changed, 4656 insertions(+), 105 deletions(-)
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
> create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
> create mode 100644 arch/arm/dts/rk3399-opp.dtsi
> create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-orangepi.dts
> create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
> create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
> create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
> create mode 100644 configs/nanopc-t4-rk3399_defconfig
> create mode 100644 configs/nanopi-m4-rk3399_defconfig
> create mode 100644 configs/nanopi-neo4-rk3399_defconfig
> create mode 100644 configs/orangepi-rk3399_defconfig
> create mode 100644 configs/rockpro64-rk3399_defconfig
>
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 00/14] rockchip: Add new rk3399 boards
@ 2019-04-16 11:58 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 11:58 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> This series is combination of previous version[1] plus new rk3399
> boards addition.
Thanks for following-up on this series!
> Overall this series add support below rk3399 boards
> - Orangepi RK3399
> - Nanopc T4
> - Nanopi M4
> - Nanopi NEO4
> - Orangepi RK3399
> - Rockpro64
>
> All the respective dts(i) files are synced from Linux 5.1-rc2 and few
> dts(i) from linux-next.
>
> Nanopi NEO4, Rockpro64 are supporting via Rockchip miniloader, and rest
> support both Rockchip miniloader along with U-Boot SPL.
>
> - Rockpro64, is not possible to boot via U-Boot SPL since it has dependency with LPDDR4
> code which is work-in-progress and as soon it arrived in mailing list, will update the
> same with ddr dtsi.
> - Nanopi NEO4 has some ddr issue with[2] rk3399-sdram-ddr3-1866.dtsi,
> will update the same with U-Boot SPL once it is fixed.
Has the status evolved since? It looks like both have SPL enabled in
this series. If the SPL doesn't support DRAM configuration yet, it
should probably be explicitly disabled.
Cheers,
Paul
> patch 1, 2: Sync rk3399 dtsi files from Linux 5.1-rc2
>
> patch 3: Create global rk3399-u-boot.dtsi
>
> patch 4: move default SPL_FIT_GENERATOR to Kconfig
>
> patch 5: Move common rk3399 configs into Kconfig
>
> patch 6: Add Orangepi RK3399 support
>
> patch 7: Sync rk3399-nanopi4.dtsi from Linux
>
> patch 8: Fix for sdmmc CD pin
>
> patch 9: Add 4GB LPDDR3-1866 ddr dtsi
>
> patch 10: Add Nanopi M4 support
>
> patch 11: Add Nanopc T4 support
>
> patch 12: Add Nanopi NEO4 support
>
> patch 13: Add Rockpro64 support
>
> patch 14: Global document for build/flash
>
> [2] https://marc.info/?l=u-boot&m=154671835328469&w=2
> [1] https://patchwork.ozlabs.org/patch/1054208/
>
> Any inputs?
> Jagan.
>
> Jagan Teki (14):
> rockchip: dts: rk3399: Sync rk3399-opp from Linux
> rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
> rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
> Kconfig: Add default SPL_FIT_GENERATOR for rockchip
> arm: rockchip: rk3399: Move common configs in Kconfig
> rockchip: rk3399: Add Orangepi RK3399 support
> rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
> rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
> rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings
> rockchip: rk3399: Add Nanopi M4 board support
> rockchip: rk3399: Add Nanopc T4 board support
> rockchip: rk3399: Add Nanopi NEO4 board support
> rockchip: rk3399: Add Rockpro64 board support
> doc: rockchip: Add global doc for rk3399 build/flash
>
> Kconfig | 1 +
> arch/arm/dts/Makefile | 5 +
> arch/arm/dts/rk3399-evb.dts | 1 -
> arch/arm/dts/rk3399-firefly.dts | 1 -
> arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-nanopc-t4.dts | 91 +
> arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-nanopi-m4.dts | 66 +
> arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +
> arch/arm/dts/rk3399-nanopi-neo4.dts | 50 +
> arch/arm/dts/rk3399-nanopi4.dtsi | 699 ++++++++
> arch/arm/dts/rk3399-opp.dtsi | 133 ++
> arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++
> arch/arm/dts/rk3399-puma.dtsi | 1 -
> arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
> arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++
> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
> arch/arm/dts/rk3399-u-boot.dtsi | 8 +
> arch/arm/dts/rk3399.dtsi | 6 +
> arch/arm/mach-rockchip/Kconfig | 16 +
> board/rockchip/evb_rk3399/MAINTAINERS | 32 +
> configs/chromebook_bob_defconfig | 17 -
> configs/evb-rk3399_defconfig | 17 -
> configs/ficus-rk3399_defconfig | 17 -
> configs/firefly-rk3399_defconfig | 17 -
> configs/nanopc-t4-rk3399_defconfig | 58 +
> configs/nanopi-m4-rk3399_defconfig | 58 +
> configs/nanopi-neo4-rk3399_defconfig | 58 +
> configs/orangepi-rk3399_defconfig | 58 +
> configs/puma-rk3399_defconfig | 16 -
> configs/rock960-rk3399_defconfig | 17 -
> configs/rockpro64-rk3399_defconfig | 58 +
> doc/README.rockchip | 209 ++-
> 34 files changed, 4656 insertions(+), 105 deletions(-)
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
> create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
> create mode 100644 arch/arm/dts/rk3399-opp.dtsi
> create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-orangepi.dts
> create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
> create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
> create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
> create mode 100644 configs/nanopc-t4-rk3399_defconfig
> create mode 100644 configs/nanopi-m4-rk3399_defconfig
> create mode 100644 configs/nanopi-neo4-rk3399_defconfig
> create mode 100644 configs/orangepi-rk3399_defconfig
> create mode 100644 configs/rockpro64-rk3399_defconfig
>
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 01/14] rockchip: dts: rk3399: Sync rk3399-opp from Linux
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 11:59 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 11:59 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Sync rk3399-opp.dtsi from Linux.
>
> Linux commit details about the rk3399-opp.dtsi sync:
> "arm64: dts: rockchip: use SPDX-License-Identifier"
> (sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399-opp.dtsi | 133 +++++++++++++++++++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-opp.dtsi
>
> diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
> new file mode 100644
> index 0000000000..d6f1095abb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-opp.dtsi
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
> + */
> +
> +/ {
> + cluster0_opp: opp-table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <800000>;
> + clock-latency-ns = <40000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <800000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <850000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <925000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <1125000>;
> + };
> + };
> +
> + cluster1_opp: opp-table1 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <800000>;
> + clock-latency-ns = <40000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <800000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <825000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <875000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <950000>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <1025000>;
> + };
> + opp06 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <1100000>;
> + };
> + opp07 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <1200000>;
> + };
> + };
> +
> + gpu_opp_table: opp-table2 {
> + compatible = "operating-points-v2";
> +
> + opp00 {
> + opp-hz = /bits/ 64 <200000000>;
> + opp-microvolt = <800000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <297000000>;
> + opp-microvolt = <800000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <400000000>;
> + opp-microvolt = <825000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <875000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <925000>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <1100000>;
> + };
> + };
> +};
> +
> +&cpu_l0 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_l1 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_l2 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_l3 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_b0 {
> + operating-points-v2 = <&cluster1_opp>;
> +};
> +
> +&cpu_b1 {
> + operating-points-v2 = <&cluster1_opp>;
> +};
> +
> +&gpu {
> + operating-points-v2 = <&gpu_opp_table>;
> +};
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 01/14] rockchip: dts: rk3399: Sync rk3399-opp from Linux
@ 2019-04-16 11:59 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 11:59 UTC (permalink / raw)
To: u-boot
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Sync rk3399-opp.dtsi from Linux.
>
> Linux commit details about the rk3399-opp.dtsi sync:
> "arm64: dts: rockchip: use SPDX-License-Identifier"
> (sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399-opp.dtsi | 133 +++++++++++++++++++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-opp.dtsi
>
> diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
> new file mode 100644
> index 0000000000..d6f1095abb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-opp.dtsi
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
> + */
> +
> +/ {
> + cluster0_opp: opp-table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <800000>;
> + clock-latency-ns = <40000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <800000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <850000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <925000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <1125000>;
> + };
> + };
> +
> + cluster1_opp: opp-table1 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <800000>;
> + clock-latency-ns = <40000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <800000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <825000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <875000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <950000>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <1416000000>;
> + opp-microvolt = <1025000>;
> + };
> + opp06 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <1100000>;
> + };
> + opp07 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <1200000>;
> + };
> + };
> +
> + gpu_opp_table: opp-table2 {
> + compatible = "operating-points-v2";
> +
> + opp00 {
> + opp-hz = /bits/ 64 <200000000>;
> + opp-microvolt = <800000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <297000000>;
> + opp-microvolt = <800000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <400000000>;
> + opp-microvolt = <825000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <875000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <925000>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <1100000>;
> + };
> + };
> +};
> +
> +&cpu_l0 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_l1 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_l2 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_l3 {
> + operating-points-v2 = <&cluster0_opp>;
> +};
> +
> +&cpu_b0 {
> + operating-points-v2 = <&cluster1_opp>;
> +};
> +
> +&cpu_b1 {
> + operating-points-v2 = <&cluster1_opp>;
> +};
> +
> +&gpu {
> + operating-points-v2 = <&gpu_opp_table>;
> +};
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 02/14] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:00 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:00 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> To make successful build with dts(i) files syncing from Linux 5.1-rc2
> the rk3399.dtsi would require pwm2_pin_pull_down.
>
> So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2. Since this
> node is strictly not part of any commit alone, I have mentioned
> Linux 5.1-rc2 tag for future reference of where would this sync
> coming from.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
> index b53e41b4dc..99471f6287 100644
> --- a/arch/arm/dts/rk3399.dtsi
> +++ b/arch/arm/dts/rk3399.dtsi
> @@ -2495,6 +2495,12 @@
> rockchip,pins =
> <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
> };
> +
> +
> + pwm2_pin_pull_down: pwm2-pin-pull-down {
> + rockchip,pins =
> + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
> + };
> };
>
> pwm3a {
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 02/14] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
@ 2019-04-16 12:00 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:00 UTC (permalink / raw)
To: u-boot
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> To make successful build with dts(i) files syncing from Linux 5.1-rc2
> the rk3399.dtsi would require pwm2_pin_pull_down.
>
> So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2. Since this
> node is strictly not part of any commit alone, I have mentioned
> Linux 5.1-rc2 tag for future reference of where would this sync
> coming from.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
> index b53e41b4dc..99471f6287 100644
> --- a/arch/arm/dts/rk3399.dtsi
> +++ b/arch/arm/dts/rk3399.dtsi
> @@ -2495,6 +2495,12 @@
> rockchip,pins =
> <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
> };
> +
> +
> + pwm2_pin_pull_down: pwm2-pin-pull-down {
> + rockchip,pins =
> + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
> + };
> };
>
> pwm3a {
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 03/14] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:00 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:00 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> u-boot,dm-pre-reloc is required for SDMMC booted rk3399 boards and
> which is U-Boot specific devicetrees binding.
>
> Move it on global rk3399-u-boot.dtsi file and rest of the U-Boot
> bindings will move it future based on the requirement.
>
> This would help to sync the devicetrees from Linux whenever required
> instead of adding specific nodes.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399-evb.dts | 1 -
> arch/arm/dts/rk3399-firefly.dts | 1 -
> arch/arm/dts/rk3399-puma.dtsi | 1 -
> arch/arm/dts/rk3399-u-boot.dtsi | 8 ++++++++
> 4 files changed, 8 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
>
> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
> index ce004d0d18..9162f3dd50 100644
> --- a/arch/arm/dts/rk3399-evb.dts
> +++ b/arch/arm/dts/rk3399-evb.dts
> @@ -155,7 +155,6 @@
> };
>
> &sdmmc {
> - u-boot,dm-pre-reloc;
> bus-width = <4>;
> status = "okay";
> };
> diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
> index f90e7e88db..46f2ffaf8d 100644
> --- a/arch/arm/dts/rk3399-firefly.dts
> +++ b/arch/arm/dts/rk3399-firefly.dts
> @@ -592,7 +592,6 @@
> };
>
> &sdmmc {
> - u-boot,dm-pre-reloc;
> bus-width = <4>;
> status = "okay";
> };
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 8304f67192..9049694243 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -492,7 +492,6 @@
> };
>
> &sdmmc {
> - u-boot,dm-pre-reloc;
> clock-frequency = <150000000>;
> max-frequency = <40000000>;
> supports-sd;
> diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
> new file mode 100644
> index 0000000000..f533ed95eb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-u-boot.dtsi
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +&sdmmc {
> + u-boot,dm-pre-reloc;
> +};
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 03/14] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
@ 2019-04-16 12:00 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:00 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> u-boot,dm-pre-reloc is required for SDMMC booted rk3399 boards and
> which is U-Boot specific devicetrees binding.
>
> Move it on global rk3399-u-boot.dtsi file and rest of the U-Boot
> bindings will move it future based on the requirement.
>
> This would help to sync the devicetrees from Linux whenever required
> instead of adding specific nodes.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399-evb.dts | 1 -
> arch/arm/dts/rk3399-firefly.dts | 1 -
> arch/arm/dts/rk3399-puma.dtsi | 1 -
> arch/arm/dts/rk3399-u-boot.dtsi | 8 ++++++++
> 4 files changed, 8 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/dts/rk3399-u-boot.dtsi
>
> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
> index ce004d0d18..9162f3dd50 100644
> --- a/arch/arm/dts/rk3399-evb.dts
> +++ b/arch/arm/dts/rk3399-evb.dts
> @@ -155,7 +155,6 @@
> };
>
> &sdmmc {
> - u-boot,dm-pre-reloc;
> bus-width = <4>;
> status = "okay";
> };
> diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
> index f90e7e88db..46f2ffaf8d 100644
> --- a/arch/arm/dts/rk3399-firefly.dts
> +++ b/arch/arm/dts/rk3399-firefly.dts
> @@ -592,7 +592,6 @@
> };
>
> &sdmmc {
> - u-boot,dm-pre-reloc;
> bus-width = <4>;
> status = "okay";
> };
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 8304f67192..9049694243 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -492,7 +492,6 @@
> };
>
> &sdmmc {
> - u-boot,dm-pre-reloc;
> clock-frequency = <150000000>;
> max-frequency = <40000000>;
> supports-sd;
> diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
> new file mode 100644
> index 0000000000..f533ed95eb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-u-boot.dtsi
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +&sdmmc {
> + u-boot,dm-pre-reloc;
> +};
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:01 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:01 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add default SPL_FIT_GENERATOR py script for rockchip platforms if
> specific target enabled SPL_LOAD_FIT.
>
> So, this would help get rid of explicitly mentioning the default
> SPL FIT generator in defconfigs. however some targets, like puma_rk3399
> still require their own FIT generator so in those cases the default will
> override with defconfig defined generator.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> Kconfig | 1 +
> configs/chromebook_bob_defconfig | 1 -
> configs/evb-rk3399_defconfig | 1 -
> configs/ficus-rk3399_defconfig | 1 -
> configs/firefly-rk3399_defconfig | 1 -
> configs/rock960-rk3399_defconfig | 1 -
> 6 files changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/Kconfig b/Kconfig
> index 305b265ed7..5679a288ec 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
> string ".its file generator script for U-Boot FIT image"
> depends on SPL_FIT
> default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
> + default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
> help
> Specifies a (platform specific) script file to generate the FIT
> source file used to build the U-Boot FIT image file. This gets
> diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
> index ce3deccb8a..04e25e1d4f 100644
> --- a/configs/chromebook_bob_defconfig
> +++ b/configs/chromebook_bob_defconfig
> @@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
> index d98535357a..49b2e2e089 100644
> --- a/configs/evb-rk3399_defconfig
> +++ b/configs/evb-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
> index 94c565efc2..fe3b9964e8 100644
> --- a/configs/ficus-rk3399_defconfig
> +++ b/configs/ficus-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
> index 6725b48970..914304bb43 100644
> --- a/configs/firefly-rk3399_defconfig
> +++ b/configs/firefly-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
> index cb5a35f4f5..5e6778ea20 100644
> --- a/configs/rock960-rk3399_defconfig
> +++ b/configs/rock960-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
@ 2019-04-16 12:01 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:01 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add default SPL_FIT_GENERATOR py script for rockchip platforms if
> specific target enabled SPL_LOAD_FIT.
>
> So, this would help get rid of explicitly mentioning the default
> SPL FIT generator in defconfigs. however some targets, like puma_rk3399
> still require their own FIT generator so in those cases the default will
> override with defconfig defined generator.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> Kconfig | 1 +
> configs/chromebook_bob_defconfig | 1 -
> configs/evb-rk3399_defconfig | 1 -
> configs/ficus-rk3399_defconfig | 1 -
> configs/firefly-rk3399_defconfig | 1 -
> configs/rock960-rk3399_defconfig | 1 -
> 6 files changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/Kconfig b/Kconfig
> index 305b265ed7..5679a288ec 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
> string ".its file generator script for U-Boot FIT image"
> depends on SPL_FIT
> default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
> + default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
> help
> Specifies a (platform specific) script file to generate the FIT
> source file used to build the U-Boot FIT image file. This gets
> diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
> index ce3deccb8a..04e25e1d4f 100644
> --- a/configs/chromebook_bob_defconfig
> +++ b/configs/chromebook_bob_defconfig
> @@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
> index d98535357a..49b2e2e089 100644
> --- a/configs/evb-rk3399_defconfig
> +++ b/configs/evb-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
> index 94c565efc2..fe3b9964e8 100644
> --- a/configs/ficus-rk3399_defconfig
> +++ b/configs/ficus-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
> index 6725b48970..914304bb43 100644
> --- a/configs/firefly-rk3399_defconfig
> +++ b/configs/firefly-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
> index cb5a35f4f5..5e6778ea20 100644
> --- a/configs/rock960-rk3399_defconfig
> +++ b/configs/rock960-rk3399_defconfig
> @@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 05/14] arm: rockchip: rk3399: Move common configs in Kconfig
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:02 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:02 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Few SPL and U-Boot proper configs are common to all rk3399 target
> defconfigs, move them and select it from platform kconfig.
>
> Moved configs:
> - SPL_ATF
> - SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
> - SPL_LOAD_FIT
> - SPL_CLK if SPL
> - SPL_PINCTRL if SPL
> - SPL_RAM if SPL
> - SPL_REGMAP if SPL
> - SPL_SYSCON if SPL
> - CLK
> - FIT
> - PINCTRL
> - RAM
> - REGMAP
> - SYSCON
> - DM_PMIC
> - DM_REGULATOR_FIXED
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/mach-rockchip/Kconfig | 16 ++++++++++++++++
> configs/chromebook_bob_defconfig | 16 ----------------
> configs/evb-rk3399_defconfig | 16 ----------------
> configs/ficus-rk3399_defconfig | 16 ----------------
> configs/firefly-rk3399_defconfig | 16 ----------------
> configs/puma-rk3399_defconfig | 16 ----------------
> configs/rock960-rk3399_defconfig | 16 ----------------
> 7 files changed, 16 insertions(+), 96 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index b9a026abb5..dbe7f11d39 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -132,9 +132,25 @@ config ROCKCHIP_RK3399
> select ARM64
> select SUPPORT_SPL
> select SPL
> + select SPL_ATF
> + select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
> + select SPL_LOAD_FIT
> + select SPL_CLK if SPL
> + select SPL_PINCTRL if SPL
> + select SPL_RAM if SPL
> + select SPL_REGMAP if SPL
> + select SPL_SYSCON if SPL
> select SPL_SEPARATE_BSS
> select SPL_SERIAL_SUPPORT
> select SPL_DRIVERS_MISC_SUPPORT
> + select CLK
> + select FIT
> + select PINCTRL
> + select RAM
> + select REGMAP
> + select SYSCON
> + select DM_PMIC
> + select DM_REGULATOR_FIXED
> select DEBUG_UART_BOARD_INIT
> select BOARD_LATE_INIT
> select ROCKCHIP_BROM_HELPER
> diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
> index 04e25e1d4f..fdcbabf912 100644
> --- a/configs/chromebook_bob_defconfig
> +++ b/configs/chromebook_bob_defconfig
> @@ -17,16 +17,12 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> CONFIG_SPL_SPI_LOAD=y
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> @@ -45,12 +41,6 @@ CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-gru-bob"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> @@ -70,16 +60,10 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_ROCKCHIP_SPI=y
> CONFIG_SYSRESET=y
> diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
> index 49b2e2e089..1ba9dcba62 100644
> --- a/configs/evb-rk3399_defconfig
> +++ b/configs/evb-rk3399_defconfig
> @@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> @@ -32,12 +28,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
> diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
> index fe3b9964e8..67c62065aa 100644
> --- a/configs/ficus-rk3399_defconfig
> +++ b/configs/ficus-rk3399_defconfig
> @@ -11,14 +11,10 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> @@ -31,12 +27,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -48,17 +38,11 @@ CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_RGMII=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
> diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
> index 914304bb43..1d3a7f2982 100644
> --- a/configs/firefly-rk3399_defconfig
> +++ b/configs/firefly-rk3399_defconfig
> @@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> @@ -31,12 +27,6 @@ CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 3547ec6b27..e5ea2fe0b3 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -15,8 +15,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
> CONFIG_MISC_INIT_R=y
> @@ -31,8 +29,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
> CONFIG_SPL_I2C_SUPPORT=y
> CONFIG_SPL_POWER_SUPPORT=y
> CONFIG_SPL_SPI_LOAD=y
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> @@ -51,12 +47,6 @@ CONFIG_OF_LIVE=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MISC=y
> @@ -74,20 +64,14 @@ CONFIG_PHY_MICREL_KSZ90X1=y
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_DM_PMIC_FAN53555=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_SPL_DM_REGULATOR=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_SPL_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_DM_RTC=y
> CONFIG_RTC_ISL1208=y
> CONFIG_DEBUG_UART_SHIFT=2
> diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
> index 5e6778ea20..cc7d6f89b1 100644
> --- a/configs/rock960-rk3399_defconfig
> +++ b/configs/rock960-rk3399_defconfig
> @@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_SYS_PROMPT="rock960 => "
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> @@ -32,12 +28,6 @@ CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock960"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -45,16 +35,10 @@ CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_ROCKCHIP=y
> CONFIG_SF_DEFAULT_SPEED=20000000
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 05/14] arm: rockchip: rk3399: Move common configs in Kconfig
@ 2019-04-16 12:02 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:02 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Few SPL and U-Boot proper configs are common to all rk3399 target
> defconfigs, move them and select it from platform kconfig.
>
> Moved configs:
> - SPL_ATF
> - SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
> - SPL_LOAD_FIT
> - SPL_CLK if SPL
> - SPL_PINCTRL if SPL
> - SPL_RAM if SPL
> - SPL_REGMAP if SPL
> - SPL_SYSCON if SPL
> - CLK
> - FIT
> - PINCTRL
> - RAM
> - REGMAP
> - SYSCON
> - DM_PMIC
> - DM_REGULATOR_FIXED
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/mach-rockchip/Kconfig | 16 ++++++++++++++++
> configs/chromebook_bob_defconfig | 16 ----------------
> configs/evb-rk3399_defconfig | 16 ----------------
> configs/ficus-rk3399_defconfig | 16 ----------------
> configs/firefly-rk3399_defconfig | 16 ----------------
> configs/puma-rk3399_defconfig | 16 ----------------
> configs/rock960-rk3399_defconfig | 16 ----------------
> 7 files changed, 16 insertions(+), 96 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index b9a026abb5..dbe7f11d39 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -132,9 +132,25 @@ config ROCKCHIP_RK3399
> select ARM64
> select SUPPORT_SPL
> select SPL
> + select SPL_ATF
> + select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
> + select SPL_LOAD_FIT
> + select SPL_CLK if SPL
> + select SPL_PINCTRL if SPL
> + select SPL_RAM if SPL
> + select SPL_REGMAP if SPL
> + select SPL_SYSCON if SPL
> select SPL_SEPARATE_BSS
> select SPL_SERIAL_SUPPORT
> select SPL_DRIVERS_MISC_SUPPORT
> + select CLK
> + select FIT
> + select PINCTRL
> + select RAM
> + select REGMAP
> + select SYSCON
> + select DM_PMIC
> + select DM_REGULATOR_FIXED
> select DEBUG_UART_BOARD_INIT
> select BOARD_LATE_INIT
> select ROCKCHIP_BROM_HELPER
> diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
> index 04e25e1d4f..fdcbabf912 100644
> --- a/configs/chromebook_bob_defconfig
> +++ b/configs/chromebook_bob_defconfig
> @@ -17,16 +17,12 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> CONFIG_SPL_SPI_LOAD=y
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> @@ -45,12 +41,6 @@ CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-gru-bob"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> @@ -70,16 +60,10 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_ROCKCHIP_SPI=y
> CONFIG_SYSRESET=y
> diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
> index 49b2e2e089..1ba9dcba62 100644
> --- a/configs/evb-rk3399_defconfig
> +++ b/configs/evb-rk3399_defconfig
> @@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> @@ -32,12 +28,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
> diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
> index fe3b9964e8..67c62065aa 100644
> --- a/configs/ficus-rk3399_defconfig
> +++ b/configs/ficus-rk3399_defconfig
> @@ -11,14 +11,10 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> @@ -31,12 +27,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -48,17 +38,11 @@ CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_RGMII=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
> diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
> index 914304bb43..1d3a7f2982 100644
> --- a/configs/firefly-rk3399_defconfig
> +++ b/configs/firefly-rk3399_defconfig
> @@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_MMC=y
> @@ -31,12 +27,6 @@ CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -47,16 +37,10 @@ CONFIG_SF_DEFAULT_SPEED=20000000
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 3547ec6b27..e5ea2fe0b3 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -15,8 +15,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
> CONFIG_MISC_INIT_R=y
> @@ -31,8 +29,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
> CONFIG_SPL_I2C_SUPPORT=y
> CONFIG_SPL_POWER_SUPPORT=y
> CONFIG_SPL_SPI_LOAD=y
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> @@ -51,12 +47,6 @@ CONFIG_OF_LIVE=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MISC=y
> @@ -74,20 +64,14 @@ CONFIG_PHY_MICREL_KSZ90X1=y
> CONFIG_DM_ETH=y
> CONFIG_ETH_DESIGNWARE=y
> CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_DM_PMIC_FAN53555=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_SPL_DM_REGULATOR=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_SPL_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_DM_RTC=y
> CONFIG_RTC_ISL1208=y
> CONFIG_DEBUG_UART_SHIFT=2
> diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
> index 5e6778ea20..cc7d6f89b1 100644
> --- a/configs/rock960-rk3399_defconfig
> +++ b/configs/rock960-rk3399_defconfig
> @@ -11,15 +11,11 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_SPL_STACK_R_ADDR=0x80000
> CONFIG_DEBUG_UART=y
> -CONFIG_FIT=y
> -CONFIG_SPL_LOAD_FIT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> -CONFIG_SPL_ATF=y
> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> CONFIG_SYS_PROMPT="rock960 => "
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPT=y
> @@ -32,12 +28,6 @@ CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock960"
> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_REGMAP=y
> -CONFIG_SPL_REGMAP=y
> -CONFIG_SYSCON=y
> -CONFIG_SPL_SYSCON=y
> -CONFIG_CLK=y
> -CONFIG_SPL_CLK=y
> CONFIG_ROCKCHIP_GPIO=y
> CONFIG_SYS_I2C_ROCKCHIP=y
> CONFIG_MMC_DW=y
> @@ -45,16 +35,10 @@ CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_ROCKCHIP=y
> CONFIG_SF_DEFAULT_SPEED=20000000
> -CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> -CONFIG_DM_PMIC=y
> CONFIG_PMIC_RK8XX=y
> CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> -CONFIG_RAM=y
> -CONFIG_SPL_RAM=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> CONFIG_SYSRESET=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 06/14] rockchip: rk3399: Add Orangepi RK3399 support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:03 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:03 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Orangepi RK3399 board.
>
> Specification
> - Rockchip RK3399
> - 2GB/4GB DDR3
> - 16GB eMMC
> - SD card slot
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI
> - Mini PCIe
> - Sensors, Keys etc
> - DC12V-2A and DC5V-2A
>
> Commit details about Linux DTS sync:
> "arm64: dts: rockchip: Add support for the Orange Pi RK3399"
> (sha1: d3e71487a790979057c0fdbf32f85033639c16e6)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
I think it would be good to have DRAM configuration eventually exposed
to Linux for advanced power management. But that's a separare issue.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 7 +
> configs/orangepi-rk3399_defconfig | 58 ++
> 5 files changed, 844 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-orangepi.dts
> create mode 100644 configs/orangepi-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 0e2ffdb87f..6d55b0caf8 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-evb.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> rk3399-puma-ddr1600.dtb \
> rk3399-puma-ddr1866.dtb \
> diff --git a/arch/arm/dts/rk3399-orangepi-u-boot.dtsi b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> new file mode 100644
> index 0000000000..236b61d78d
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-ddr3-1333.dtsi"
> diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
> new file mode 100644
> index 0000000000..cf37b96a6b
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-orangepi.dts
> @@ -0,0 +1,771 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "dt-bindings/pwm/pwm.h"
> +#include "dt-bindings/input/input.h"
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + model = "Orange Pi RK3399 Board";
> + compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 1>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1800000>;
> + poll-interval = <100>;
> +
> + button-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + press-threshold-microvolt = <100000>;
> + };
> +
> + button-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + press-threshold-microvolt = <300000>;
> + };
> +
> + back {
> + label = "Back";
> + linux,code = <KEY_BACK>;
> + press-threshold-microvolt = <985000>;
> + };
> +
> + menu {
> + label = "Menu";
> + linux,code = <KEY_MENU>;
> + press-threshold-microvolt = <1314000>;
> + };
> + };
> +
> + dc_12v: dc-12v {
> + compatible = "regulator-fixed";
> + regulator-name = "dc_12v";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + debounce-interval = <100>;
> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <KEY_POWER>;
> + linux,input-type = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_btn>;
> + wakeup-source;
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_reg_on_h>;
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* switched by pmic_sleep */
> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc1v8_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_1v8>;
> + };
> +
> + vcc3v0_sd: vcc3v0-sd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_pwr_h>;
> + regulator-boot-on;
> + regulator-max-microvolt = <3000000>;
> + regulator-min-microvolt = <3000000>;
> + regulator-name = "vcc3v0_sd";
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host_en>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc5v0_typec0: vcc5v0-typec0-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_typec0_en>;
> + regulator-name = "vcc5v0_typec0";
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_sys: vcc-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vdd_log: vdd-log {
> + compatible = "pwm-regulator";
> + pwms = <&pwm2 0 25000 1>;
> + regulator-name = "vdd_log";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + vin-supply = <&vcc_sys>;
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + assigned-clock-parents = <&clkin_gmac>;
> + clock_in_out = "input";
> + phy-supply = <&vcc3v3_s3>;
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c3>;
> + status = "okay";
> +};
> +
> +&hdmi_sound {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc3v3_sys>;
> + vcc2-supply = <&vcc3v3_sys>;
> + vcc3-supply = <&vcc3v3_sys>;
> + vcc4-supply = <&vcc3v3_sys>;
> + vcc6-supply = <&vcc3v3_sys>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc3v3_sys>;
> + vcc10-supply = <&vcc3v3_sys>;
> + vcc11-supply = <&vcc3v3_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_3v0>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-name = "vdd_center";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-name = "vdd_cpu_l";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_dvp: LDO_REG1 {
> + regulator-name = "vcc1v8_dvp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v0_tp: LDO_REG2 {
> + regulator-name = "vcc3v0_tp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc1v8_pmupll: LDO_REG3 {
> + regulator-name = "vcc1v8_pmupll";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio: LDO_REG4 {
> + regulator-name = "vcc_sdio";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-name = "vcca3v0_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-name = "vcc_1v5";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcca1v8_codec: LDO_REG7 {
> + regulator-name = "vcca1v8_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-name = "vcc_3v0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v3_s3: SWITCH_REG1 {
> + regulator-name = "vcc3v3_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_s0: SWITCH_REG2 {
> + regulator-name = "vcc3v3_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator@40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@41 {
> + compatible = "silergy,syr828";
> + reg = <0x41>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c1 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +
> + ak09911@c {
> + compatible = "asahi-kasei,ak09911";
> + reg = <0x0c>;
> + vdd-supply = <&vcc3v3_s3>;
> + };
> +
> + mpu6500@68 {
> + compatible = "invensense,mpu6500";
> + reg = <0x68>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gsensor_int_l>;
> + vddio-supply = <&vcc3v3_s3>;
> + };
> +
> + lsm6ds3@6a {
> + compatible = "st,lsm6ds3";
> + reg = <0x6a>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gyr_int_l>;
> + vdd-supply = <&vcc3v3_s3>;
> + vddio-supply = <&vcc3v3_s3>;
> + };
> +
> + cm32181@10 {
> + compatible = "capella,cm32181";
> + reg = <0x10>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&light_int_l>;
> + vdd-supply = <&vcc3v3_s3>;
> + };
> +};
> +
> +&io_domains {
> + status = "okay";
> + bt656-supply = <&vcc_3v0>;
> + audio-supply = <&vcca1v8_codec>;
> + sdmmc-supply = <&vcc_sdio>;
> + gpio1830-supply = <&vcc_3v0>;
> +};
> +
> +&pmu_io_domains {
> + status = "okay";
> + pmu1830-supply = <&vcc_3v0>;
> +};
> +
> +&pinctrl {
> + buttons {
> + pwr_btn: pwr-btn {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + sd {
> + sdmmc0_pwr_h: sdmmc0-pwr-h {
> + rockchip,pins =
> + <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb2 {
> + vcc5v0_host_en: vcc5v0-host-en {
> + rockchip,pins =
> + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + vcc5v0_typec0_en: vcc5v0-typec0-en {
> + rockchip,pins =
> + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_reg_on_h: wifi-reg-on-h {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + wifi {
> + wifi_host_wake_l: wifi-host-wake-l {
> + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + bluetooth {
> + bt_reg_on_h: bt-enable-h {
> + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_host_wake_l: bt-host-wake-l {
> + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_wake_l: bt-wake-l {
> + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + mpu6500 {
> + gsensor_int_l: gsensor-int-l {
> + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + lsm6ds3 {
> + gyr_int_l: gyr-int-l {
> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + cm32181 {
> + light_int_l: light-int-l {
> + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + non-removable;
> + status = "okay";
> +};
> +
> +&sdio0 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + clock-frequency = <50000000>;
> + disable-wp;
> + keep-power-in-suspend;
> + max-frequency = <50000000>;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> + sd-uhs-sdr104;
> + status = "okay";
> +
> + brcmf: wifi@1 {
> + compatible = "brcm,bcm4329-fmac";
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
> + interrupt-names = "host-wake";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_host_wake_l>;
> + };
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> + clock-frequency = <150000000>;
> + disable-wp;
> + max-frequency = <150000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> + vmmc-supply = <&vcc3v0_sd>;
> + vqmmc-supply = <&vcc_sdio>;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>;
> + rockchip,hw-tshut-polarity = <1>;
> + status = "okay";
> +};
> +
> +&u2phy0 {
> + status = "okay";
> +
> + u2phy0_otg: otg-port {
> + phy-supply = <&vcc5v0_typec0>;
> + status = "okay";
> + };
> +
> + u2phy0_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
> + };
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> + dr_mode = "otg";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index caad30641e..07ee8ce92c 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -5,3 +5,10 @@ F: board/rockchip/evb_rk3399
> F: include/configs/evb_rk3399.h
> F: configs/evb-rk3399_defconfig
> F: configs/firefly-rk3399_defconfig
> +
> +ORANGEPI-RK3399
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/orangepi-rk3399_defconfig
> +F: arch/arm/dts/rk3399-u-boot.dtsi
> +F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
> new file mode 100644
> index 0000000000..deb7bc1388
> --- /dev/null
> +++ b/configs/orangepi-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 06/14] rockchip: rk3399: Add Orangepi RK3399 support
@ 2019-04-16 12:03 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:03 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Orangepi RK3399 board.
>
> Specification
> - Rockchip RK3399
> - 2GB/4GB DDR3
> - 16GB eMMC
> - SD card slot
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI
> - Mini PCIe
> - Sensors, Keys etc
> - DC12V-2A and DC5V-2A
>
> Commit details about Linux DTS sync:
> "arm64: dts: rockchip: Add support for the Orange Pi RK3399"
> (sha1: d3e71487a790979057c0fdbf32f85033639c16e6)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
I think it would be good to have DRAM configuration eventually exposed
to Linux for advanced power management. But that's a separare issue.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-orangepi-u-boot.dtsi | 7 +
> arch/arm/dts/rk3399-orangepi.dts | 771 +++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 7 +
> configs/orangepi-rk3399_defconfig | 58 ++
> 5 files changed, 844 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-orangepi.dts
> create mode 100644 configs/orangepi-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 0e2ffdb87f..6d55b0caf8 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-evb.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> rk3399-puma-ddr1600.dtb \
> rk3399-puma-ddr1866.dtb \
> diff --git a/arch/arm/dts/rk3399-orangepi-u-boot.dtsi b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> new file mode 100644
> index 0000000000..236b61d78d
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-ddr3-1333.dtsi"
> diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
> new file mode 100644
> index 0000000000..cf37b96a6b
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-orangepi.dts
> @@ -0,0 +1,771 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "dt-bindings/pwm/pwm.h"
> +#include "dt-bindings/input/input.h"
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + model = "Orange Pi RK3399 Board";
> + compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 1>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1800000>;
> + poll-interval = <100>;
> +
> + button-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + press-threshold-microvolt = <100000>;
> + };
> +
> + button-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + press-threshold-microvolt = <300000>;
> + };
> +
> + back {
> + label = "Back";
> + linux,code = <KEY_BACK>;
> + press-threshold-microvolt = <985000>;
> + };
> +
> + menu {
> + label = "Menu";
> + linux,code = <KEY_MENU>;
> + press-threshold-microvolt = <1314000>;
> + };
> + };
> +
> + dc_12v: dc-12v {
> + compatible = "regulator-fixed";
> + regulator-name = "dc_12v";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + keys: gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + debounce-interval = <100>;
> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Power";
> + linux,code = <KEY_POWER>;
> + linux,input-type = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwr_btn>;
> + wakeup-source;
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_reg_on_h>;
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* switched by pmic_sleep */
> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc1v8_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_1v8>;
> + };
> +
> + vcc3v0_sd: vcc3v0-sd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_pwr_h>;
> + regulator-boot-on;
> + regulator-max-microvolt = <3000000>;
> + regulator-min-microvolt = <3000000>;
> + regulator-name = "vcc3v0_sd";
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host_en>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc5v0_typec0: vcc5v0-typec0-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_typec0_en>;
> + regulator-name = "vcc5v0_typec0";
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_sys: vcc-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vdd_log: vdd-log {
> + compatible = "pwm-regulator";
> + pwms = <&pwm2 0 25000 1>;
> + regulator-name = "vdd_log";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + vin-supply = <&vcc_sys>;
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + assigned-clock-parents = <&clkin_gmac>;
> + clock_in_out = "input";
> + phy-supply = <&vcc3v3_s3>;
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c3>;
> + status = "okay";
> +};
> +
> +&hdmi_sound {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk808: pmic at 1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc3v3_sys>;
> + vcc2-supply = <&vcc3v3_sys>;
> + vcc3-supply = <&vcc3v3_sys>;
> + vcc4-supply = <&vcc3v3_sys>;
> + vcc6-supply = <&vcc3v3_sys>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc3v3_sys>;
> + vcc10-supply = <&vcc3v3_sys>;
> + vcc11-supply = <&vcc3v3_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_3v0>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-name = "vdd_center";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-name = "vdd_cpu_l";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_dvp: LDO_REG1 {
> + regulator-name = "vcc1v8_dvp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v0_tp: LDO_REG2 {
> + regulator-name = "vcc3v0_tp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc1v8_pmupll: LDO_REG3 {
> + regulator-name = "vcc1v8_pmupll";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio: LDO_REG4 {
> + regulator-name = "vcc_sdio";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-name = "vcca3v0_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-name = "vcc_1v5";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcca1v8_codec: LDO_REG7 {
> + regulator-name = "vcca1v8_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-name = "vcc_3v0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v3_s3: SWITCH_REG1 {
> + regulator-name = "vcc3v3_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_s0: SWITCH_REG2 {
> + regulator-name = "vcc3v3_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator at 40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator at 41 {
> + compatible = "silergy,syr828";
> + reg = <0x41>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c1 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +
> + ak09911 at c {
> + compatible = "asahi-kasei,ak09911";
> + reg = <0x0c>;
> + vdd-supply = <&vcc3v3_s3>;
> + };
> +
> + mpu6500 at 68 {
> + compatible = "invensense,mpu6500";
> + reg = <0x68>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gsensor_int_l>;
> + vddio-supply = <&vcc3v3_s3>;
> + };
> +
> + lsm6ds3 at 6a {
> + compatible = "st,lsm6ds3";
> + reg = <0x6a>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gyr_int_l>;
> + vdd-supply = <&vcc3v3_s3>;
> + vddio-supply = <&vcc3v3_s3>;
> + };
> +
> + cm32181 at 10 {
> + compatible = "capella,cm32181";
> + reg = <0x10>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&light_int_l>;
> + vdd-supply = <&vcc3v3_s3>;
> + };
> +};
> +
> +&io_domains {
> + status = "okay";
> + bt656-supply = <&vcc_3v0>;
> + audio-supply = <&vcca1v8_codec>;
> + sdmmc-supply = <&vcc_sdio>;
> + gpio1830-supply = <&vcc_3v0>;
> +};
> +
> +&pmu_io_domains {
> + status = "okay";
> + pmu1830-supply = <&vcc_3v0>;
> +};
> +
> +&pinctrl {
> + buttons {
> + pwr_btn: pwr-btn {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + sd {
> + sdmmc0_pwr_h: sdmmc0-pwr-h {
> + rockchip,pins =
> + <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb2 {
> + vcc5v0_host_en: vcc5v0-host-en {
> + rockchip,pins =
> + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + vcc5v0_typec0_en: vcc5v0-typec0-en {
> + rockchip,pins =
> + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_reg_on_h: wifi-reg-on-h {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + wifi {
> + wifi_host_wake_l: wifi-host-wake-l {
> + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + bluetooth {
> + bt_reg_on_h: bt-enable-h {
> + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_host_wake_l: bt-host-wake-l {
> + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_wake_l: bt-wake-l {
> + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + mpu6500 {
> + gsensor_int_l: gsensor-int-l {
> + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + lsm6ds3 {
> + gyr_int_l: gyr-int-l {
> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + cm32181 {
> + light_int_l: light-int-l {
> + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + non-removable;
> + status = "okay";
> +};
> +
> +&sdio0 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + clock-frequency = <50000000>;
> + disable-wp;
> + keep-power-in-suspend;
> + max-frequency = <50000000>;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> + sd-uhs-sdr104;
> + status = "okay";
> +
> + brcmf: wifi at 1 {
> + compatible = "brcm,bcm4329-fmac";
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
> + interrupt-names = "host-wake";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_host_wake_l>;
> + };
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> + clock-frequency = <150000000>;
> + disable-wp;
> + max-frequency = <150000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> + vmmc-supply = <&vcc3v0_sd>;
> + vqmmc-supply = <&vcc_sdio>;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>;
> + rockchip,hw-tshut-polarity = <1>;
> + status = "okay";
> +};
> +
> +&u2phy0 {
> + status = "okay";
> +
> + u2phy0_otg: otg-port {
> + phy-supply = <&vcc5v0_typec0>;
> + status = "okay";
> + };
> +
> + u2phy0_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
> + };
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> + dr_mode = "otg";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index caad30641e..07ee8ce92c 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -5,3 +5,10 @@ F: board/rockchip/evb_rk3399
> F: include/configs/evb_rk3399.h
> F: configs/evb-rk3399_defconfig
> F: configs/firefly-rk3399_defconfig
> +
> +ORANGEPI-RK3399
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/orangepi-rk3399_defconfig
> +F: arch/arm/dts/rk3399-u-boot.dtsi
> +F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
> new file mode 100644
> index 0000000000..deb7bc1388
> --- /dev/null
> +++ b/configs/orangepi-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 07/14] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:04 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:04 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag.
>
> Linux commit details about the rk3399-nanopi4.dtsi sync:
> "arm64: dts: rockchip: Add nanopi4 bluetooth"
> (sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399-nanopi4.dtsi | 703 +++++++++++++++++++++++++++++++
> 1 file changed, 703 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
>
> diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
> new file mode 100644
> index 0000000000..d325e11728
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi4.dtsi
> @@ -0,0 +1,703 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * RK3399-based FriendlyElec boards device tree source
> + *
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc3v3_sys";
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-name = "vcc5v0_sys";
> + vin-supply = <&vdd_5v>;
> + };
> +
> + /* switched by pmic_sleep */
> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8_s3";
> + vin-supply = <&vcc_1v8>;
> + };
> +
> + vcc3v0_sd: vcc3v0-sd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_pwr_h>;
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc3v0_sd";
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + vbus_typec: vbus-typec {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-name = "vbus_typec";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_key>;
> +
> + power {
> + debounce-interval = <100>;
> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Key Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + leds: gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&leds_gpio>;
> +
> + status {
> + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> + label = "status_led";
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_reg_on_h>;
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clock-parents = <&clkin_gmac>;
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + clock_in_out = "input";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + phy-mode = "rgmii";
> + phy-supply = <&vcc3v3_s3>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_cec>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <160>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +
> + vdd_cpu_b: regulator@40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cpu_b_sleep>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_cpu_b";
> + regulator-ramp-delay = <1000>;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@41 {
> + compatible = "silergy,syr828";
> + reg = <0x41>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpu_sleep>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_gpu";
> + regulator-ramp-delay = <1000>;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + clock-output-names = "xin32k", "rtc_clko_wifi";
> + #clock-cells = <1>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc3v3_sys>;
> + vcc2-supply = <&vcc3v3_sys>;
> + vcc3-supply = <&vcc3v3_sys>;
> + vcc4-supply = <&vcc3v3_sys>;
> + vcc6-supply = <&vcc3v3_sys>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc3v3_sys>;
> + vcc10-supply = <&vcc3v3_sys>;
> + vcc11-supply = <&vcc3v3_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_3v0>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_center";
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_cpu_l";
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_1v8";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_cam: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8_cam";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v0_touch: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc3v0_touch";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc1v8_pmupll: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8_pmupll";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-init-microvolt = <3000000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_sdio";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcca3v0_codec";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vcc_1v5";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcca1v8_codec: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcca1v8_codec";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc_3v0";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v3_s3: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc3v3_s3";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_s0: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc3v3_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <200000>;
> + i2c-scl-rising-time-ns = <150>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <160>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +
> + fusb0: typec-portc@22 {
> + compatible = "fcs,fusb302";
> + reg = <0x22>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&fusb0_int>;
> + vbus-supply = <&vbus_typec>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&io_domains {
> + bt656-supply = <&vcc_1v8>;
> + audio-supply = <&vcca1v8_codec>;
> + sdmmc-supply = <&vcc_sdio>;
> + gpio1830-supply = <&vcc_3v0>;
> + status = "okay";
> +};
> +
> +&pcie_phy {
> + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
> + assigned-clock-rates = <100000000>;
> + assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
> + status = "okay";
> +};
> +
> +&pcie0 {
> + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
> + max-link-speed = <2>;
> + num-lanes = <4>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + fusb30x {
> + fusb0_int: fusb0-int {
> + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + gpio-leds {
> + leds_gpio: leds-gpio {
> + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + cpu_b_sleep: cpu-b-sleep {
> + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + gpu_sleep: gpu-sleep {
> + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + rockchip-key {
> + power_key: power-key {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + sdio {
> + bt_host_wake_l: bt-host-wake-l {
> + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_reg_on_h: bt-reg-on-h {
> + /* external pullup to VCC1V8_PMUPLL */
> + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_wake_l: bt-wake-l {
> + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + wifi_reg_on_h: wifi-reg_on-h {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdmmc {
> + sdmmc0_det_l: sdmmc0-det-l {
> + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + sdmmc0_pwr_h: sdmmc0-pwr-h {
> + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + pmu1830-supply = <&vcc_3v0>;
> + status = "okay";
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "active";
> + pinctrl-0 = <&pwm2_pin_pull_down>;
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs200-1_8v;
> + non-removable;
> + status = "okay";
> +};
> +
> +&sdio0 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + keep-power-in-suspend;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> + sd-uhs-sdr104;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc3v0_sd>;
> + vqmmc-supply = <&vcc_sdio>;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-mode = <1>;
> + /* tshut polarity 0:LOW 1:HIGH */
> + rockchip,hw-tshut-polarity = <1>;
> + status = "okay";
> +};
> +
> +&u2phy0 {
> + status = "okay";
> +};
> +
> +&u2phy0_host {
> + status = "okay";
> +};
> +
> +&u2phy0_otg {
> + status = "okay";
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +};
> +
> +&u2phy1_host {
> + status = "okay";
> +};
> +
> +&u2phy1_otg {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + clocks = <&rk808 1>;
> + clock-names = "lpo";
> + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> + max-speed = <4000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
> + vbat-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_1v8>;
> + };
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 07/14] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
@ 2019-04-16 12:04 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:04 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag.
>
> Linux commit details about the rk3399-nanopi4.dtsi sync:
> "arm64: dts: rockchip: Add nanopi4 bluetooth"
> (sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/rk3399-nanopi4.dtsi | 703 +++++++++++++++++++++++++++++++
> 1 file changed, 703 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
>
> diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
> new file mode 100644
> index 0000000000..d325e11728
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi4.dtsi
> @@ -0,0 +1,703 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * RK3399-based FriendlyElec boards device tree source
> + *
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc3v3_sys";
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-name = "vcc5v0_sys";
> + vin-supply = <&vdd_5v>;
> + };
> +
> + /* switched by pmic_sleep */
> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8_s3";
> + vin-supply = <&vcc_1v8>;
> + };
> +
> + vcc3v0_sd: vcc3v0-sd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_pwr_h>;
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc3v0_sd";
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + vbus_typec: vbus-typec {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-name = "vbus_typec";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_key>;
> +
> + power {
> + debounce-interval = <100>;
> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Key Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + leds: gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&leds_gpio>;
> +
> + status {
> + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> + label = "status_led";
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_reg_on_h>;
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clock-parents = <&clkin_gmac>;
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + clock_in_out = "input";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + phy-mode = "rgmii";
> + phy-supply = <&vcc3v3_s3>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_cec>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <160>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +
> + vdd_cpu_b: regulator at 40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cpu_b_sleep>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_cpu_b";
> + regulator-ramp-delay = <1000>;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator at 41 {
> + compatible = "silergy,syr828";
> + reg = <0x41>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpu_sleep>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vdd_gpu";
> + regulator-ramp-delay = <1000>;
> + vin-supply = <&vcc3v3_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + rk808: pmic at 1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + clock-output-names = "xin32k", "rtc_clko_wifi";
> + #clock-cells = <1>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc3v3_sys>;
> + vcc2-supply = <&vcc3v3_sys>;
> + vcc3-supply = <&vcc3v3_sys>;
> + vcc4-supply = <&vcc3v3_sys>;
> + vcc6-supply = <&vcc3v3_sys>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc3v3_sys>;
> + vcc10-supply = <&vcc3v3_sys>;
> + vcc11-supply = <&vcc3v3_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_3v0>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_center";
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_cpu_l";
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_1v8";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_cam: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8_cam";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v0_touch: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc3v0_touch";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc1v8_pmupll: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc1v8_pmupll";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-init-microvolt = <3000000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_sdio";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcca3v0_codec";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vcc_1v5";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcca1v8_codec: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcca1v8_codec";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc_3v0";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v3_s3: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc3v3_s3";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_s0: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc3v3_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <200000>;
> + i2c-scl-rising-time-ns = <150>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <160>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +
> + fusb0: typec-portc at 22 {
> + compatible = "fcs,fusb302";
> + reg = <0x22>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&fusb0_int>;
> + vbus-supply = <&vbus_typec>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&io_domains {
> + bt656-supply = <&vcc_1v8>;
> + audio-supply = <&vcca1v8_codec>;
> + sdmmc-supply = <&vcc_sdio>;
> + gpio1830-supply = <&vcc_3v0>;
> + status = "okay";
> +};
> +
> +&pcie_phy {
> + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
> + assigned-clock-rates = <100000000>;
> + assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
> + status = "okay";
> +};
> +
> +&pcie0 {
> + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
> + max-link-speed = <2>;
> + num-lanes = <4>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + fusb30x {
> + fusb0_int: fusb0-int {
> + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + gpio-leds {
> + leds_gpio: leds-gpio {
> + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + cpu_b_sleep: cpu-b-sleep {
> + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + gpu_sleep: gpu-sleep {
> + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + rockchip-key {
> + power_key: power-key {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + sdio {
> + bt_host_wake_l: bt-host-wake-l {
> + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_reg_on_h: bt-reg-on-h {
> + /* external pullup to VCC1V8_PMUPLL */
> + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_wake_l: bt-wake-l {
> + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + wifi_reg_on_h: wifi-reg_on-h {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + sdmmc {
> + sdmmc0_det_l: sdmmc0-det-l {
> + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + sdmmc0_pwr_h: sdmmc0-pwr-h {
> + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + pmu1830-supply = <&vcc_3v0>;
> + status = "okay";
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "active";
> + pinctrl-0 = <&pwm2_pin_pull_down>;
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs200-1_8v;
> + non-removable;
> + status = "okay";
> +};
> +
> +&sdio0 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + keep-power-in-suspend;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> + sd-uhs-sdr104;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc3v0_sd>;
> + vqmmc-supply = <&vcc_sdio>;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-mode = <1>;
> + /* tshut polarity 0:LOW 1:HIGH */
> + rockchip,hw-tshut-polarity = <1>;
> + status = "okay";
> +};
> +
> +&u2phy0 {
> + status = "okay";
> +};
> +
> +&u2phy0_host {
> + status = "okay";
> +};
> +
> +&u2phy0_otg {
> + status = "okay";
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +};
> +
> +&u2phy1_host {
> + status = "okay";
> +};
> +
> +&u2phy1_otg {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + clocks = <&rk808 1>;
> + clock-names = "lpo";
> + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> + max-speed = <4000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
> + vbat-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcc_1v8>;
> + };
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 10/14] rockchip: rk3399: Add Nanopi M4 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:04 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:04 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Nanopi M4 board.
>
> Specification
> - Rockchip RK3399
> - Dual-Channel 4GB LPDDR3-1866
> - SD card slot
> - eMMC socket
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI
> - USB 3.0 x4
> - USB Type C power and data
> - GPIO1, GPIO2 expansion ports
> - DC5V/3A
>
> Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: Refine nanopi4 differences"
> (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +++
> arch/arm/dts/rk3399-nanopi-m4.dts | 66 +++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
> configs/nanopi-m4-rk3399_defconfig | 58 ++++++++++++++++++++
> 5 files changed, 138 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
> create mode 100644 configs/nanopi-m4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 6d55b0caf8..d2ac26b556 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-evb.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-nanopi-m4.dtb \
> rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> rk3399-puma-ddr1600.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> new file mode 100644
> index 0000000000..1173d496ec
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
> new file mode 100644
> index 0000000000..60358ab8c7
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-m4.dts
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * FriendlyElec NanoPi M4 board device tree source
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyElec NanoPi M4";
> + compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
> +
> + vdd_5v: vdd-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5v0_core: vcc5v0-core {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_core";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vdd_5v>;
> + };
> +
> + vcc5v0_usb1: vcc5v0-usb1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb1";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc5v0_usb2: vcc5v0-usb2 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb2";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc5v0_core>;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vcc5v0_usb1>;
> +};
> +
> +&u2phy1_host {
> + phy-supply = <&vcc5v0_usb2>;
> +};
> +
> +&vbus_typec {
> + regulator-always-on;
> + vin-supply = <&vdd_5v>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index 07ee8ce92c..ae43805a6a 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
> F: configs/evb-rk3399_defconfig
> F: configs/firefly-rk3399_defconfig
>
> +NANOPI-M4
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopi-m4-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> +
> ORANGEPI-RK3399
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> new file mode 100644
> index 0000000000..be36a28315
> --- /dev/null
> +++ b/configs/nanopi-m4-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 10/14] rockchip: rk3399: Add Nanopi M4 board support
@ 2019-04-16 12:04 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:04 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Nanopi M4 board.
>
> Specification
> - Rockchip RK3399
> - Dual-Channel 4GB LPDDR3-1866
> - SD card slot
> - eMMC socket
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI
> - USB 3.0 x4
> - USB Type C power and data
> - GPIO1, GPIO2 expansion ports
> - DC5V/3A
>
> Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: Refine nanopi4 differences"
> (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cheers,
Paul
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +++
> arch/arm/dts/rk3399-nanopi-m4.dts | 66 +++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
> configs/nanopi-m4-rk3399_defconfig | 58 ++++++++++++++++++++
> 5 files changed, 138 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
> create mode 100644 configs/nanopi-m4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 6d55b0caf8..d2ac26b556 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-evb.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-nanopi-m4.dtb \
> rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> rk3399-puma-ddr1600.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> new file mode 100644
> index 0000000000..1173d496ec
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
> new file mode 100644
> index 0000000000..60358ab8c7
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-m4.dts
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * FriendlyElec NanoPi M4 board device tree source
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyElec NanoPi M4";
> + compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
> +
> + vdd_5v: vdd-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5v0_core: vcc5v0-core {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_core";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vdd_5v>;
> + };
> +
> + vcc5v0_usb1: vcc5v0-usb1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb1";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc5v0_usb2: vcc5v0-usb2 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb2";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc5v0_core>;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vcc5v0_usb1>;
> +};
> +
> +&u2phy1_host {
> + phy-supply = <&vcc5v0_usb2>;
> +};
> +
> +&vbus_typec {
> + regulator-always-on;
> + vin-supply = <&vdd_5v>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index 07ee8ce92c..ae43805a6a 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
> F: configs/evb-rk3399_defconfig
> F: configs/firefly-rk3399_defconfig
>
> +NANOPI-M4
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopi-m4-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
> +
> ORANGEPI-RK3399
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> new file mode 100644
> index 0000000000..be36a28315
> --- /dev/null
> +++ b/configs/nanopi-m4-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 11/14] rockchip: rk3399: Add Nanopc T4 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:05 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:05 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Nanopc T4 board.
>
> Specification
> - Rockchip RK3399
> - Dual-Channel 4GB LPDDR3-1866
> - SD card slot
> - 16GB eMMC
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI, eDP
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 12V/2A
>
> Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
> (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Note: Hardware on the way, since it shared same DDR with Nanopi M4
> I'm confident it will boot.
It would be good to test before pushing this commit.
Cheers,
Paul
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 ++
> arch/arm/dts/rk3399-nanopc-t4.dts | 91 +++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 ++
> configs/nanopc-t4-rk3399_defconfig | 58 +++++++++++++++
> 5 files changed, 163 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
> create mode 100644 configs/nanopc-t4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index d2ac26b556..e048565bb6 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-evb.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-nanopc-t4.dtb \
> rk3399-nanopi-m4.dtb \
> rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> new file mode 100644
> index 0000000000..1173d496ec
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
> new file mode 100644
> index 0000000000..84433cf02b
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopc-t4.dts
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * FriendlyElec NanoPC-T4 board device tree source
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyElec NanoPC-T4";
> + compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
> +
> + vcc12v0_sys: vcc12v0-sys {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <12000000>;
> + regulator-min-microvolt = <12000000>;
> + regulator-name = "vcc12v0_sys";
> + };
> +
> + vcc5v0_host0: vcc5v0-host0 {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc5v0_host0";
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 1>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1800000>;
> + poll-interval = <100>;
> +
> + recovery {
> + label = "Recovery";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <18000>;
> + };
> + };
> +
> + ir-receiver {
> + compatible = "gpio-ir-receiver";
> + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ir_rx>;
> + };
> +};
> +
> +&pinctrl {
> + ir {
> + ir_rx: ir-rx {
> + /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
> + rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&sdhci {
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vcc5v0_host0>;
> +};
> +
> +&u2phy1_host {
> + phy-supply = <&vcc5v0_host0>;
> +};
> +
> +&vcc5v0_sys {
> + vin-supply = <&vcc12v0_sys>;
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc12v0_sys>;
> +};
> +
> +&vbus_typec {
> + enable-active-high;
> + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&vcc5v0_sys>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index ae43805a6a..5917abb9c1 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
> F: configs/evb-rk3399_defconfig
> F: configs/firefly-rk3399_defconfig
>
> +NANOPC-T4
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopic-t4-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
> +
> NANOPI-M4
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> new file mode 100644
> index 0000000000..7ba4f85485
> --- /dev/null
> +++ b/configs/nanopc-t4-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 11/14] rockchip: rk3399: Add Nanopc T4 board support
@ 2019-04-16 12:05 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:05 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Nanopc T4 board.
>
> Specification
> - Rockchip RK3399
> - Dual-Channel 4GB LPDDR3-1866
> - SD card slot
> - 16GB eMMC
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI, eDP
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 12V/2A
>
> Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
> (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Note: Hardware on the way, since it shared same DDR with Nanopi M4
> I'm confident it will boot.
It would be good to test before pushing this commit.
Cheers,
Paul
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 7 ++
> arch/arm/dts/rk3399-nanopc-t4.dts | 91 +++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 ++
> configs/nanopc-t4-rk3399_defconfig | 58 +++++++++++++++
> 5 files changed, 163 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
> create mode 100644 configs/nanopc-t4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index d2ac26b556..e048565bb6 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-evb.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-nanopc-t4.dtb \
> rk3399-nanopi-m4.dtb \
> rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> new file mode 100644
> index 0000000000..1173d496ec
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
> new file mode 100644
> index 0000000000..84433cf02b
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopc-t4.dts
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * FriendlyElec NanoPC-T4 board device tree source
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyElec NanoPC-T4";
> + compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
> +
> + vcc12v0_sys: vcc12v0-sys {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <12000000>;
> + regulator-min-microvolt = <12000000>;
> + regulator-name = "vcc12v0_sys";
> + };
> +
> + vcc5v0_host0: vcc5v0-host0 {
> + compatible = "regulator-fixed";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc5v0_host0";
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 1>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1800000>;
> + poll-interval = <100>;
> +
> + recovery {
> + label = "Recovery";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <18000>;
> + };
> + };
> +
> + ir-receiver {
> + compatible = "gpio-ir-receiver";
> + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ir_rx>;
> + };
> +};
> +
> +&pinctrl {
> + ir {
> + ir_rx: ir-rx {
> + /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
> + rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&sdhci {
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vcc5v0_host0>;
> +};
> +
> +&u2phy1_host {
> + phy-supply = <&vcc5v0_host0>;
> +};
> +
> +&vcc5v0_sys {
> + vin-supply = <&vcc12v0_sys>;
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc12v0_sys>;
> +};
> +
> +&vbus_typec {
> + enable-active-high;
> + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&vcc5v0_sys>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index ae43805a6a..5917abb9c1 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
> F: configs/evb-rk3399_defconfig
> F: configs/firefly-rk3399_defconfig
>
> +NANOPC-T4
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopic-t4-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
> +
> NANOPI-M4
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> new file mode 100644
> index 0000000000..7ba4f85485
> --- /dev/null
> +++ b/configs/nanopc-t4-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [U-Boot] [PATCH v2 12/14] rockchip: rk3399: Add Nanopi NEO4 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:06 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:06 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Nanopi NEO4 board.
>
> Specification
> - Rockchip RK3399
> - 1GB DDR3-1866
> - SD card slot
> - eMMC Socket
> - RTL8211E 1Gbps
> - AP6212 WiFI/BT
> - HDMI In/Out, DP, MIPI CSI
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 5V/3A
>
> Commit details of rk3399-nanopi-neo4.dts sync from Linux:
> "arm64: dts: rockchip: Add Nanopi NEO4 initial support"
> (sha1: 092470b537f19788d957aed12d835a179b606014)
I think SPL support should be disabled for this one.
Cheers,
Paul
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +++
> arch/arm/dts/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
> configs/nanopi-neo4-rk3399_defconfig | 58 +++++++++++++++++++++
> 5 files changed, 121 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
> create mode 100644 configs/nanopi-neo4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index e048565bb6..ede7da23fb 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-gru-bob.dtb \
> rk3399-nanopc-t4.dtb \
> rk3399-nanopi-m4.dtb \
> + rk3399-nanopi-neo4.dtb \
> rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> rk3399-puma-ddr1600.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> new file mode 100644
> index 0000000000..7bddc3acdb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts
> new file mode 100644
> index 0000000000..195410b089
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-neo4.dts
> @@ -0,0 +1,50 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Amarula Solutions B.V.
> + * Author: Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyARM NanoPi NEO4";
> + compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
> +
> + vdd_5v: vdd-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5v0_core: vcc5v0-core {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_core";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vdd_5v>;
> + };
> +
> + vcc5v0_usb1: vcc5v0-usb1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb1";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc5v0_core>;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vcc5v0_usb1>;
> +};
> +
> +&vbus_typec {
> + regulator-always-on;
> + vin-supply = <&vdd_5v>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index 5917abb9c1..ed58861820 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -18,6 +18,12 @@ S: Maintained
> F: configs/nanopi-m4-rk3399_defconfig
> F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
>
> +NANOPI-NEO4
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopi-neo4-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> +
> ORANGEPI-RK3399
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> new file mode 100644
> index 0000000000..eb9d81ae87
> --- /dev/null
> +++ b/configs/nanopi-neo4-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 12/14] rockchip: rk3399: Add Nanopi NEO4 board support
@ 2019-04-16 12:06 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:06 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Nanopi NEO4 board.
>
> Specification
> - Rockchip RK3399
> - 1GB DDR3-1866
> - SD card slot
> - eMMC Socket
> - RTL8211E 1Gbps
> - AP6212 WiFI/BT
> - HDMI In/Out, DP, MIPI CSI
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 5V/3A
>
> Commit details of rk3399-nanopi-neo4.dts sync from Linux:
> "arm64: dts: rockchip: Add Nanopi NEO4 initial support"
> (sha1: 092470b537f19788d957aed12d835a179b606014)
I think SPL support should be disabled for this one.
Cheers,
Paul
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +++
> arch/arm/dts/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
> configs/nanopi-neo4-rk3399_defconfig | 58 +++++++++++++++++++++
> 5 files changed, 121 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
> create mode 100644 configs/nanopi-neo4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index e048565bb6..ede7da23fb 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-gru-bob.dtb \
> rk3399-nanopc-t4.dtb \
> rk3399-nanopi-m4.dtb \
> + rk3399-nanopi-neo4.dtb \
> rk3399-orangepi.dtb \
> rk3399-puma-ddr1333.dtb \
> rk3399-puma-ddr1600.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> new file mode 100644
> index 0000000000..7bddc3acdb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts
> new file mode 100644
> index 0000000000..195410b089
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-neo4.dts
> @@ -0,0 +1,50 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Amarula Solutions B.V.
> + * Author: Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyARM NanoPi NEO4";
> + compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
> +
> + vdd_5v: vdd-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc5v0_core: vcc5v0-core {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_core";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vdd_5v>;
> + };
> +
> + vcc5v0_usb1: vcc5v0-usb1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb1";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc5v0_core>;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vcc5v0_usb1>;
> +};
> +
> +&vbus_typec {
> + regulator-always-on;
> + vin-supply = <&vdd_5v>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index 5917abb9c1..ed58861820 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -18,6 +18,12 @@ S: Maintained
> F: configs/nanopi-m4-rk3399_defconfig
> F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
>
> +NANOPI-NEO4
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopi-neo4-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> +
> ORANGEPI-RK3399
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> new file mode 100644
> index 0000000000..eb9d81ae87
> --- /dev/null
> +++ b/configs/nanopi-neo4-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 13/14] rockchip: rk3399: Add Rockpro64 board support
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-16 12:07 ` Paul Kocialkowski
-1 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:07 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Kever Yang, Akash Gajjar
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
u-boot-0aAXYlwwYIKGBzrmiIFOJg
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Rockpro64 board.
>
> Specification
> - Rockchip RK3399
> - 2/4GB Dual-Channel LPDDR3
> - SD card slot
> - eMMC socket
> - 128Mb SPI Flash
> - Gigabit ethernet
> - PCIe 4X slot
> - WiFI/BT module socket
> - HDMI In/Out, DP, MIPI DSI/CSI, eDP
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 12V/2A
>
> Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: rockpro64 dts add usb regulator"
> (sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb)
>
> 'Akash' has sent an initial patch before, so I keep him as board
> maintainer and I'm co-maintainer based on our conversation.
I think SPL support should be disabled for this one too.
Cheers,
Paul
> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Signed-off-by: Akash Gajjar <akash@openedev.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
> arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 7 +
> configs/rockpro64-rk3399_defconfig | 58 ++
> 5 files changed, 784 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
> create mode 100644 configs/rockpro64-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ede7da23fb..23a9807444 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-puma-ddr1600.dtb \
> rk3399-puma-ddr1866.dtb \
> rk3399-rock960.dtb \
> + rk3399-rockpro64.dtb \
> rv1108-elgin-r1.dtb \
> rv1108-evb.dtb
> dtb-$(CONFIG_ARCH_MESON) += \
> diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> new file mode 100644
> index 0000000000..7bddc3acdb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
> new file mode 100644
> index 0000000000..1f2394e058
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-rockpro64.dts
> @@ -0,0 +1,712 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + model = "Pine64 RockPro64";
> + compatible = "pine64,rockpro64", "rockchip,rk3399";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwrbtn>;
> +
> + power {
> + debounce-interval = <100>;
> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Key Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
> +
> + work-led {
> + label = "work";
> + default-state = "on";
> + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + diy-led {
> + label = "diy";
> + default-state = "off";
> + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_h>;
> +
> + /*
> + * On the module itself this is one of these (depending
> + * on the actual card populated):
> + * - SDIO_RESET_L_WL_REG_ON
> + * - PDN (power down when low)
> + */
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +
> + vcc12v_dcin: vcc12v-dcin {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + /* switched by pmic_sleep */
> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc1v8_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_1v8>;
> + };
> +
> + vcc3v3_pcie: vcc3v3-pcie-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie_pwr_en>;
> + regulator-name = "vcc3v3_pcie";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host_en>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc5v0_typec: vcc5v0-typec-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_typec_en>;
> + regulator-name = "vcc5v0_typec";
> + regulator-always-on;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc5v0_usb: vcc5v0-usb {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vdd_log: vdd-log {
> + compatible = "pwm-regulator";
> + pwms = <&pwm2 0 25000 1>;
> + regulator-name = "vdd_log";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + assigned-clock-parents = <&clkin_gmac>;
> + clock_in_out = "input";
> + phy-supply = <&vcc_lan>;
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_cec>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc5v0_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcca_1v8>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-name = "vdd_center";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-name = "vdd_cpu_l";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_dvp: LDO_REG1 {
> + regulator-name = "vcc1v8_dvp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v0_touch: LDO_REG2 {
> + regulator-name = "vcc3v0_touch";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca_1v8: LDO_REG3 {
> + regulator-name = "vcca_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio: LDO_REG4 {
> + regulator-name = "vcc_sdio";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-name = "vcca3v0_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-name = "vcc_1v5";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcca1v8_codec: LDO_REG7 {
> + regulator-name = "vcca1v8_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-name = "vcc_3v0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v3_s3: vcc_lan: SWITCH_REG1 {
> + regulator-name = "vcc3v3_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_s0: SWITCH_REG2 {
> + regulator-name = "vcc3v3_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator@40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vsel1_gpio>;
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@41 {
> + compatible = "silergy,syr828";
> + reg = <0x41>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vsel2_gpio>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c1 {
> + i2c-scl-rising-time-ns = <300>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + i2c-scl-rising-time-ns = <600>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> +
> + fusb0: typec-portc@22 {
> + compatible = "fcs,fusb302";
> + reg = <0x22>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&fusb0_int>;
> + vbus-supply = <&vcc5v0_typec>;
> + status = "okay";
> + };
> +};
> +
> +&i2s0 {
> + rockchip,playback-channels = <8>;
> + rockchip,capture-channels = <8>;
> + status = "okay";
> +};
> +
> +&i2s1 {
> + rockchip,playback-channels = <2>;
> + rockchip,capture-channels = <2>;
> + status = "okay";
> +};
> +
> +&i2s2 {
> + status = "okay";
> +};
> +
> +&io_domains {
> + status = "okay";
> +
> + bt656-supply = <&vcc1v8_dvp>;
> + audio-supply = <&vcca1v8_codec>;
> + sdmmc-supply = <&vcc_sdio>;
> + gpio1830-supply = <&vcc_3v0>;
> +};
> +
> +&pmu_io_domains {
> + pmu1830-supply = <&vcc_3v0>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + buttons {
> + pwrbtn: pwrbtn {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + fusb302x {
> + fusb0_int: fusb0-int {
> + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + leds {
> + work_led_gpio: work_led-gpio {
> + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + diy_led_gpio: diy_led-gpio {
> + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pcie {
> + pcie_pwr_en: pcie-pwr-en {
> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + vsel1_gpio: vsel1-gpio {
> + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + vsel2_gpio: vsel2-gpio {
> + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_enable_h: wifi-enable-h {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb-typec {
> + vcc5v0_typec_en: vcc5v0_typec_en {
> + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + usb2 {
> + vcc5v0_host_en: vcc5v0-host-en {
> + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + max-frequency = <150000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + non-removable;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-mode = <1>;
> + /* tshut polarity 0:LOW 1:HIGH */
> + rockchip,hw-tshut-polarity = <1>;
> + status = "okay";
> +};
> +
> +&u2phy0 {
> + status = "okay";
> +
> + u2phy0_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy0_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> + dr_mode = "otg";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index ed58861820..c724162ef3 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -30,3 +30,10 @@ S: Maintained
> F: configs/orangepi-rk3399_defconfig
> F: arch/arm/dts/rk3399-u-boot.dtsi
> F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> +
> +ROCKPRO64
> +M: Akash Gajjar <akash@openedev.com>
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/rockpro64-rk3399_defconfig
> +F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
> new file mode 100644
> index 0000000000..3d0c7d0c6d
> --- /dev/null
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 13/14] rockchip: rk3399: Add Rockpro64 board support
@ 2019-04-16 12:07 ` Paul Kocialkowski
0 siblings, 0 replies; 68+ messages in thread
From: Paul Kocialkowski @ 2019-04-16 12:07 UTC (permalink / raw)
To: u-boot
Hi,
Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> Add initial support for Rockpro64 board.
>
> Specification
> - Rockchip RK3399
> - 2/4GB Dual-Channel LPDDR3
> - SD card slot
> - eMMC socket
> - 128Mb SPI Flash
> - Gigabit ethernet
> - PCIe 4X slot
> - WiFI/BT module socket
> - HDMI In/Out, DP, MIPI DSI/CSI, eDP
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 12V/2A
>
> Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: rockpro64 dts add usb regulator"
> (sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb)
>
> 'Akash' has sent an initial patch before, so I keep him as board
> maintainer and I'm co-maintainer based on our conversation.
I think SPL support should be disabled for this one too.
Cheers,
Paul
> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Signed-off-by: Akash Gajjar <akash@openedev.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 +
> arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 7 +
> configs/rockpro64-rk3399_defconfig | 58 ++
> 5 files changed, 784 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
> create mode 100644 configs/rockpro64-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ede7da23fb..23a9807444 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3399-puma-ddr1600.dtb \
> rk3399-puma-ddr1866.dtb \
> rk3399-rock960.dtb \
> + rk3399-rockpro64.dtb \
> rv1108-elgin-r1.dtb \
> rv1108-evb.dtb
> dtb-$(CONFIG_ARCH_MESON) += \
> diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> new file mode 100644
> index 0000000000..7bddc3acdb
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
> new file mode 100644
> index 0000000000..1f2394e058
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-rockpro64.dts
> @@ -0,0 +1,712 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + model = "Pine64 RockPro64";
> + compatible = "pine64,rockpro64", "rockchip,rk3399";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwrbtn>;
> +
> + power {
> + debounce-interval = <100>;
> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Key Power";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
> +
> + work-led {
> + label = "work";
> + default-state = "on";
> + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + diy-led {
> + label = "diy";
> + default-state = "off";
> + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk808 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_h>;
> +
> + /*
> + * On the module itself this is one of these (depending
> + * on the actual card populated):
> + * - SDIO_RESET_L_WL_REG_ON
> + * - PDN (power down when low)
> + */
> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> + };
> +
> + vcc12v_dcin: vcc12v-dcin {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + /* switched by pmic_sleep */
> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc1v8_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_1v8>;
> + };
> +
> + vcc3v3_pcie: vcc3v3-pcie-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie_pwr_en>;
> + regulator-name = "vcc3v3_pcie";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host_en>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc5v0_typec: vcc5v0-typec-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_typec_en>;
> + regulator-name = "vcc5v0_typec";
> + regulator-always-on;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc5v0_usb: vcc5v0-usb {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vdd_log: vdd-log {
> + compatible = "pwm-regulator";
> + pwms = <&pwm2 0 25000 1>;
> + regulator-name = "vdd_log";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + assigned-clock-parents = <&clkin_gmac>;
> + clock_in_out = "input";
> + phy-supply = <&vcc_lan>;
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x28>;
> + rx_delay = <0x11>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_cec>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk808: pmic at 1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc5v0_sys>;
> + vcc12-supply = <&vcc3v3_sys>;
> + vddio-supply = <&vcca_1v8>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-name = "vdd_center";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-name = "vdd_cpu_l";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG4 {
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc1v8_dvp: LDO_REG1 {
> + regulator-name = "vcc1v8_dvp";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v0_touch: LDO_REG2 {
> + regulator-name = "vcc3v0_touch";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca_1v8: LDO_REG3 {
> + regulator-name = "vcca_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio: LDO_REG4 {
> + regulator-name = "vcc_sdio";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcca3v0_codec: LDO_REG5 {
> + regulator-name = "vcca3v0_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-name = "vcc_1v5";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1500000>;
> + };
> + };
> +
> + vcca1v8_codec: LDO_REG7 {
> + regulator-name = "vcca1v8_codec";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG8 {
> + regulator-name = "vcc_3v0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v3_s3: vcc_lan: SWITCH_REG1 {
> + regulator-name = "vcc3v3_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_s0: SWITCH_REG2 {
> + regulator-name = "vcc3v3_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator at 40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vsel1_gpio>;
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator at 41 {
> + compatible = "silergy,syr828";
> + reg = <0x41>;
> + fcs,suspend-voltage-selector = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vsel2_gpio>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c1 {
> + i2c-scl-rising-time-ns = <300>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + i2c-scl-rising-time-ns = <600>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> +
> + fusb0: typec-portc at 22 {
> + compatible = "fcs,fusb302";
> + reg = <0x22>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&fusb0_int>;
> + vbus-supply = <&vcc5v0_typec>;
> + status = "okay";
> + };
> +};
> +
> +&i2s0 {
> + rockchip,playback-channels = <8>;
> + rockchip,capture-channels = <8>;
> + status = "okay";
> +};
> +
> +&i2s1 {
> + rockchip,playback-channels = <2>;
> + rockchip,capture-channels = <2>;
> + status = "okay";
> +};
> +
> +&i2s2 {
> + status = "okay";
> +};
> +
> +&io_domains {
> + status = "okay";
> +
> + bt656-supply = <&vcc1v8_dvp>;
> + audio-supply = <&vcca1v8_codec>;
> + sdmmc-supply = <&vcc_sdio>;
> + gpio1830-supply = <&vcc_3v0>;
> +};
> +
> +&pmu_io_domains {
> + pmu1830-supply = <&vcc_3v0>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + buttons {
> + pwrbtn: pwrbtn {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + fusb302x {
> + fusb0_int: fusb0-int {
> + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + leds {
> + work_led_gpio: work_led-gpio {
> + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + diy_led_gpio: diy_led-gpio {
> + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pcie {
> + pcie_pwr_en: pcie-pwr-en {
> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + vsel1_gpio: vsel1-gpio {
> + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + vsel2_gpio: vsel2-gpio {
> + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_enable_h: wifi-enable-h {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb-typec {
> + vcc5v0_typec_en: vcc5v0_typec_en {
> + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + usb2 {
> + vcc5v0_host_en: vcc5v0-host-en {
> + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + max-frequency = <150000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + non-removable;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-mode = <1>;
> + /* tshut polarity 0:LOW 1:HIGH */
> + rockchip,hw-tshut-polarity = <1>;
> + status = "okay";
> +};
> +
> +&u2phy0 {
> + status = "okay";
> +
> + u2phy0_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy0_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> + dr_mode = "otg";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index ed58861820..c724162ef3 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -30,3 +30,10 @@ S: Maintained
> F: configs/orangepi-rk3399_defconfig
> F: arch/arm/dts/rk3399-u-boot.dtsi
> F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi
> +
> +ROCKPRO64
> +M: Akash Gajjar <akash@openedev.com>
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +S: Maintained
> +F: configs/rockpro64-rk3399_defconfig
> +F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
> new file mode 100644
> index 0000000000..3d0c7d0c6d
> --- /dev/null
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
@ 2019-04-17 7:40 ` Kever Yang
-1 siblings, 0 replies; 68+ messages in thread
From: Kever Yang @ 2019-04-17 7:40 UTC (permalink / raw)
To: Jagan Teki, Simon Glass, Philipp Tomsich, Akash Gajjar
Cc: u-boot, linux-rockchip, linux-amarula
Hi Jagan,
On 04/16/2019 06:56 PM, Jagan Teki wrote:
> Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
> engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
>
> Full credits to 'Liviu Dudau' who is the real author for this change.
>
> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
I think it should able to work.
Thanks,
- Kever
> 1 file changed, 1535 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
>
> diff --git a/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
> new file mode 100644
> index 0000000000..1ee08bb0a1
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
> @@ -0,0 +1,1535 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) 2018 Liviu Dudau <liviu@dudau.co.uk>
> + */
> +
> +&dmc {
> + rockchip,sdram-params = <
> + 0x2
> + 0xa
> + 0x3
> + 0x2
> + 0x2
> + 0x0
> + 0xf
> + 0xf
> + 1
> + 0x801d181e
> + 0x17050a08
> + 0x00000002
> + 0x00006426
> + 0x0000004c
> + 0x00000000
> + 0x2
> + 0xa
> + 0x3
> + 0x2
> + 0x2
> + 0x0
> + 0xf
> + 0xf
> + 1
> + 0x801d181e
> + 0x17050a08
> + 0x00000002
> + 0x00006426
> + 0x0000004c
> + 0x00000000
> + 933
> + 6
> + 2
> + 13
> + 1
> + 0x00000700
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x0000005e
> + 0x0002d976
> + 0x000003a6
> + 0x0000247a
> + 0x0000005e
> + 0x0002d976
> + 0x000003a6
> + 0x0000247a
> + 0x0000005e
> + 0x0002d976
> + 0x000003a6
> + 0x0100247a
> + 0x00000000
> + 0x00000101
> + 0x00020100
> + 0x000000bb
> + 0x000001d3
> + 0x00000000
> + 0x081c0000
> + 0x00081c00
> + 0x0400081c
> + 0x3b0a0004
> + 0x2f110828
> + 0x283b0a00
> + 0x002f1108
> + 0x08283b0a
> + 0x08002f11
> + 0x00000a0a
> + 0x0800ff4f
> + 0x0a0a080f
> + 0x0800ff4f
> + 0x0a0a080f
> + 0x0800ff4f
> + 0x0203000f
> + 0x110f1100
> + 0x040f110f
> + 0x14000a0a
> + 0x03030a0a
> + 0x00010003
> + 0x03212121
> + 0x00141414
> + 0x00000000
> + 0x03010000
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x00000000
> + 0x00080008
> + 0x00170008
> + 0x00170017
> + 0x00111111
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00ce0000
> + 0x00ce00ce
> + 0x00ce00ce
> + 0x000000ce
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000301
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x80104002
> + 0x00040003
> + 0x00040005
> + 0x00030000
> + 0x00050004
> + 0x00000004
> + 0x00040003
> + 0x00040005
> + 0x38c40000
> + 0x00001c62
> + 0x1c6238c4
> + 0x38c40000
> + 0x00001c62
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02020200
> + 0x00020202
> + 0x00030200
> + 0x00040700
> + 0x00000302
> + 0x02000407
> + 0x00000003
> + 0x00030f04
> + 0x00070004
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x20040020
> + 0x00200400
> + 0x01000400
> + 0x00000b80
> + 0x00000000
> + 0x00000001
> + 0x00000002
> + 0x0000000e
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00bb0000
> + 0x00ea005e
> + 0x00ea0000
> + 0x005e00bb
> + 0x000000ea
> + 0x00bb00ea
> + 0x00ea005e
> + 0x00ea0000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00c30000
> + 0x0000001c
> + 0x001c00c3
> + 0x00c30000
> + 0x0000001c
> + 0x00010001
> + 0x07000001
> + 0x00000707
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00c30000
> + 0x0000001c
> + 0x001c00c3
> + 0x00c30000
> + 0x0000001c
> + 0x00010001
> + 0x07000001
> + 0x00000707
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x00000000
> + 0x00000000
> + 0x18151100
> + 0x0000000c
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x0003a603
> + 0x00550151
> + 0x00000000
> + 0x015103a6
> + 0x00000055
> + 0x0003a600
> + 0x00550151
> + 0x00000000
> + 0x002f0000
> + 0x002f002f
> + 0x01010100
> + 0x01000202
> + 0x0a000002
> + 0x01000f0f
> + 0x00000000
> + 0x00000000
> + 0x00010003
> + 0x00000c03
> + 0x00000100
> + 0x00010000
> + 0x01000000
> + 0x00010000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x04040401
> + 0x01010808
> + 0x04040001
> + 0x0c0c0c04
> + 0x08080808
> + 0x08050103
> + 0x08050103
> + 0x00050103
> + 0x00020202
> + 0x06030600
> + 0x00030603
> + 0x00000000
> + 0x00000000
> + 0x0d000001
> + 0x00010028
> + 0x00010000
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00010100
> + 0x01000000
> + 0x00000001
> + 0x00000303
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x00010300
> + 0x03000100
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00ffff00
> + 0x20200000
> + 0x08000020
> + 0x00001c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00011bd4
> + 0x1c62070c
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00011bd4
> + 0x1c62070c
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00011bd4
> + 0x0202070c
> + 0x03030202
> + 0x00000018
> + 0x00000000
> + 0x00000000
> + 0x00001403
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00030000
> + 0x000f0021
> + 0x000f0021
> + 0x000f0021
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x02090209
> + 0x00050209
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x01000101
> + 0x01010101
> + 0x01000101
> + 0x01000100
> + 0x00010001
> + 0x00010002
> + 0x00020100
> + 0x00000002
> + 0x00000700
> + 0x00000000
> + 0x000038c4
> + 0x00001c62
> + 0x000038c4
> + 0x00001c62
> + 0x000038c4
> + 0x1c621c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00010000
> + 0x00000007
> + 0x81000001
> + 0x0f0003f0
> + 0x3fffffff
> + 0x0f0000a0
> + 0x377ff000
> + 0x0f000020
> + 0x377ff000
> + 0x0f000030
> + 0x377ff000
> + 0x0f0000b0
> + 0x377ff000
> + 0x0f000100
> + 0x377ff000
> + 0x0f000110
> + 0x377ff000
> + 0x0f000010
> + 0x377ff000
> + 0x03000101
> + 0x04323232
> + 0x081c0008
> + 0x00081c00
> + 0x0000001c
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x00000500
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04040000
> + 0x0d000004
> + 0x00000128
> + 0x00000000
> + 0x00030003
> + 0x00000018
> + 0x00000000
> + 0x00000000
> + 0x04060002
> + 0x04010401
> + 0x00080801
> + 0x00020001
> + 0x00080004
> + 0x00000000
> + 0x04040000
> + 0x0c0c0c04
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00030300
> + 0x00000014
> + 0x00000000
> + 0x01010300
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x00000101
> + 0x55555a5a
> + 0x55555a5a
> + 0x55555a5a
> + 0x55555a5a
> + 0x0c0c0001
> + 0x0707000c
> + 0x02020007
> + 0x00000102
> + 0x00030000
> + 0x17030000
> + 0x000f0021
> + 0x000f0021
> + 0x000f0021
> + 0x00000000
> + 0x00000000
> + 0x00000100
> + 0x140a0000
> + 0x000a030a
> + 0x03000a03
> + 0x010a000a
> + 0x00000100
> + 0x01000000
> + 0x00000000
> + 0x00000100
> + 0x1e1a0000
> + 0x10010204
> + 0x07070705
> + 0x20000202
> + 0x00201000
> + 0x00201000
> + 0x04041000
> + 0x12120100
> + 0x00010112
> + 0x004b004a
> + 0x1a030000
> + 0x0102041e
> + 0x34000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x0000c300
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x00c3004d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0100004d
> + 0x00ea00ea
> + 0x080400ea
> + 0x0f081114
> + 0x2800fcc1
> + 0x0a0e2006
> + 0x1114080a
> + 0x00000f08
> + 0x2800fcc1
> + 0x0a0e2006
> + 0x1114080a
> + 0x00000f08
> + 0x2800fcc1
> + 0x0a0e2006
> + 0x0200020a
> + 0x02000200
> + 0x02000200
> + 0x02000200
> + 0x02000200
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x01000300
> + 0x001c6200
> + 0x00011bd4
> + 0x00001c62
> + 0x00011bd4
> + 0x00001c62
> + 0x00011bd4
> + 0x08000000
> + 0x00000100
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000002
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00400320
> + 0x00000040
> + 0x00806420
> + 0x00917531
> + 0x00806420
> + 0x01917531
> + 0x00020003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x0a418820
> + 0x103f0000
> + 0x0000003f
> + 0x00038055
> + 0x03800380
> + 0x03800380
> + 0x00000380
> + 0x42080010
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00400320
> + 0x00000040
> + 0x00008eca
> + 0x00009fdb
> + 0x00008eca
> + 0x01009fdb
> + 0x00020003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x0004a0e6
> + 0x080f0000
> + 0x0000000f
> + 0x00038055
> + 0x03800380
> + 0x03800380
> + 0x00000380
> + 0x42080010
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00400320
> + 0x00000040
> + 0x00008eca
> + 0x00009fdb
> + 0x00008eca
> + 0x01009fdb
> + 0x00020003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x1ee6b16a
> + 0x10000000
> + 0x00000000
> + 0x00038055
> + 0x03800380
> + 0x03800380
> + 0x00000380
> + 0x42080010
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x01000005
> + 0x04000f00
> + 0x00020040
> + 0x00020055
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000050
> + 0x00000000
> + 0x00010100
> + 0x00000601
> + 0x00000000
> + 0x00006400
> + 0x01221102
> + 0x00000000
> + 0x00051f00
> + 0x051f051f
> + 0x051f051f
> + 0x00030003
> + 0x03000300
> + 0x00000300
> + 0x01221102
> + 0x00000000
> + 0x00000000
> + 0x04020000
> + 0x00000001
> + 0x00000011
> + 0x00000011
> + 0x00000400
> + 0x00000000
> + 0x00000011
> + 0x00000011
> + 0x00004410
> + 0x00004410
> + 0x00004410
> + 0x00004410
> + 0x00004410
> + 0x00000011
> + 0x00004410
> + 0x00000011
> + 0x00004410
> + 0x00000011
> + 0x00004410
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04000000
> + 0x00000000
> + 0x00000000
> + 0x00000508
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0xe4000000
> + 0x00000000
> + 0x00000000
> + 0x01010000
> + 0x00000000
> + >;
> +};
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
@ 2019-04-17 7:40 ` Kever Yang
0 siblings, 0 replies; 68+ messages in thread
From: Kever Yang @ 2019-04-17 7:40 UTC (permalink / raw)
To: u-boot
Hi Jagan,
On 04/16/2019 06:56 PM, Jagan Teki wrote:
> Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
> engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
>
> Full credits to 'Liviu Dudau' who is the real author for this change.
>
> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
I think it should able to work.
Thanks,
- Kever
> 1 file changed, 1535 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
>
> diff --git a/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
> new file mode 100644
> index 0000000000..1ee08bb0a1
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi
> @@ -0,0 +1,1535 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) 2018 Liviu Dudau <liviu@dudau.co.uk>
> + */
> +
> +&dmc {
> + rockchip,sdram-params = <
> + 0x2
> + 0xa
> + 0x3
> + 0x2
> + 0x2
> + 0x0
> + 0xf
> + 0xf
> + 1
> + 0x801d181e
> + 0x17050a08
> + 0x00000002
> + 0x00006426
> + 0x0000004c
> + 0x00000000
> + 0x2
> + 0xa
> + 0x3
> + 0x2
> + 0x2
> + 0x0
> + 0xf
> + 0xf
> + 1
> + 0x801d181e
> + 0x17050a08
> + 0x00000002
> + 0x00006426
> + 0x0000004c
> + 0x00000000
> + 933
> + 6
> + 2
> + 13
> + 1
> + 0x00000700
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x0000005e
> + 0x0002d976
> + 0x000003a6
> + 0x0000247a
> + 0x0000005e
> + 0x0002d976
> + 0x000003a6
> + 0x0000247a
> + 0x0000005e
> + 0x0002d976
> + 0x000003a6
> + 0x0100247a
> + 0x00000000
> + 0x00000101
> + 0x00020100
> + 0x000000bb
> + 0x000001d3
> + 0x00000000
> + 0x081c0000
> + 0x00081c00
> + 0x0400081c
> + 0x3b0a0004
> + 0x2f110828
> + 0x283b0a00
> + 0x002f1108
> + 0x08283b0a
> + 0x08002f11
> + 0x00000a0a
> + 0x0800ff4f
> + 0x0a0a080f
> + 0x0800ff4f
> + 0x0a0a080f
> + 0x0800ff4f
> + 0x0203000f
> + 0x110f1100
> + 0x040f110f
> + 0x14000a0a
> + 0x03030a0a
> + 0x00010003
> + 0x03212121
> + 0x00141414
> + 0x00000000
> + 0x03010000
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x00000000
> + 0x00080008
> + 0x00170008
> + 0x00170017
> + 0x00111111
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00ce0000
> + 0x00ce00ce
> + 0x00ce00ce
> + 0x000000ce
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000301
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x80104002
> + 0x00040003
> + 0x00040005
> + 0x00030000
> + 0x00050004
> + 0x00000004
> + 0x00040003
> + 0x00040005
> + 0x38c40000
> + 0x00001c62
> + 0x1c6238c4
> + 0x38c40000
> + 0x00001c62
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02020200
> + 0x00020202
> + 0x00030200
> + 0x00040700
> + 0x00000302
> + 0x02000407
> + 0x00000003
> + 0x00030f04
> + 0x00070004
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x20040020
> + 0x00200400
> + 0x01000400
> + 0x00000b80
> + 0x00000000
> + 0x00000001
> + 0x00000002
> + 0x0000000e
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00bb0000
> + 0x00ea005e
> + 0x00ea0000
> + 0x005e00bb
> + 0x000000ea
> + 0x00bb00ea
> + 0x00ea005e
> + 0x00ea0000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00c30000
> + 0x0000001c
> + 0x001c00c3
> + 0x00c30000
> + 0x0000001c
> + 0x00010001
> + 0x07000001
> + 0x00000707
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00c30000
> + 0x0000001c
> + 0x001c00c3
> + 0x00c30000
> + 0x0000001c
> + 0x00010001
> + 0x07000001
> + 0x00000707
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x00000000
> + 0x00000000
> + 0x18151100
> + 0x0000000c
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x0003a603
> + 0x00550151
> + 0x00000000
> + 0x015103a6
> + 0x00000055
> + 0x0003a600
> + 0x00550151
> + 0x00000000
> + 0x002f0000
> + 0x002f002f
> + 0x01010100
> + 0x01000202
> + 0x0a000002
> + 0x01000f0f
> + 0x00000000
> + 0x00000000
> + 0x00010003
> + 0x00000c03
> + 0x00000100
> + 0x00010000
> + 0x01000000
> + 0x00010000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x04040401
> + 0x01010808
> + 0x04040001
> + 0x0c0c0c04
> + 0x08080808
> + 0x08050103
> + 0x08050103
> + 0x00050103
> + 0x00020202
> + 0x06030600
> + 0x00030603
> + 0x00000000
> + 0x00000000
> + 0x0d000001
> + 0x00010028
> + 0x00010000
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00010100
> + 0x01000000
> + 0x00000001
> + 0x00000303
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x00010300
> + 0x03000100
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00ffff00
> + 0x20200000
> + 0x08000020
> + 0x00001c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00011bd4
> + 0x1c62070c
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00011bd4
> + 0x1c62070c
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00011bd4
> + 0x0202070c
> + 0x03030202
> + 0x00000018
> + 0x00000000
> + 0x00000000
> + 0x00001403
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00030000
> + 0x000f0021
> + 0x000f0021
> + 0x000f0021
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x02090209
> + 0x00050209
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x01000101
> + 0x01010101
> + 0x01000101
> + 0x01000100
> + 0x00010001
> + 0x00010002
> + 0x00020100
> + 0x00000002
> + 0x00000700
> + 0x00000000
> + 0x000038c4
> + 0x00001c62
> + 0x000038c4
> + 0x00001c62
> + 0x000038c4
> + 0x1c621c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00001c62
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00000200
> + 0x00010000
> + 0x00000007
> + 0x81000001
> + 0x0f0003f0
> + 0x3fffffff
> + 0x0f0000a0
> + 0x377ff000
> + 0x0f000020
> + 0x377ff000
> + 0x0f000030
> + 0x377ff000
> + 0x0f0000b0
> + 0x377ff000
> + 0x0f000100
> + 0x377ff000
> + 0x0f000110
> + 0x377ff000
> + 0x0f000010
> + 0x377ff000
> + 0x03000101
> + 0x04323232
> + 0x081c0008
> + 0x00081c00
> + 0x0000001c
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x0e3100c5
> + 0x00000500
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04040000
> + 0x0d000004
> + 0x00000128
> + 0x00000000
> + 0x00030003
> + 0x00000018
> + 0x00000000
> + 0x00000000
> + 0x04060002
> + 0x04010401
> + 0x00080801
> + 0x00020001
> + 0x00080004
> + 0x00000000
> + 0x04040000
> + 0x0c0c0c04
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00030300
> + 0x00000014
> + 0x00000000
> + 0x01010300
> + 0x00000000
> + 0x00000000
> + 0x01000000
> + 0x00000101
> + 0x55555a5a
> + 0x55555a5a
> + 0x55555a5a
> + 0x55555a5a
> + 0x0c0c0001
> + 0x0707000c
> + 0x02020007
> + 0x00000102
> + 0x00030000
> + 0x17030000
> + 0x000f0021
> + 0x000f0021
> + 0x000f0021
> + 0x00000000
> + 0x00000000
> + 0x00000100
> + 0x140a0000
> + 0x000a030a
> + 0x03000a03
> + 0x010a000a
> + 0x00000100
> + 0x01000000
> + 0x00000000
> + 0x00000100
> + 0x1e1a0000
> + 0x10010204
> + 0x07070705
> + 0x20000202
> + 0x00201000
> + 0x00201000
> + 0x04041000
> + 0x12120100
> + 0x00010112
> + 0x004b004a
> + 0x1a030000
> + 0x0102041e
> + 0x34000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x0000c300
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x00c3004d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0000c34d
> + 0x0001001c
> + 0x004d4d07
> + 0x001c00c3
> + 0x4d070001
> + 0x0100004d
> + 0x00ea00ea
> + 0x080400ea
> + 0x0f081114
> + 0x2800fcc1
> + 0x0a0e2006
> + 0x1114080a
> + 0x00000f08
> + 0x2800fcc1
> + 0x0a0e2006
> + 0x1114080a
> + 0x00000f08
> + 0x2800fcc1
> + 0x0a0e2006
> + 0x0200020a
> + 0x02000200
> + 0x02000200
> + 0x02000200
> + 0x02000200
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x01000300
> + 0x001c6200
> + 0x00011bd4
> + 0x00001c62
> + 0x00011bd4
> + 0x00001c62
> + 0x00011bd4
> + 0x08000000
> + 0x00000100
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000002
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x76543210
> + 0x0004c008
> + 0x000001a2
> + 0x00000000
> + 0x00000000
> + 0x00010000
> + 0x01665555
> + 0x00665555
> + 0x00010f00
> + 0x06010200
> + 0x00000003
> + 0x001700c0
> + 0x00cc0101
> + 0x00030066
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04080000
> + 0x04080400
> + 0x08000000
> + 0x0c00c007
> + 0x00000100
> + 0x00000100
> + 0x55555555
> + 0xaaaaaaaa
> + 0x55555555
> + 0xaaaaaaaa
> + 0x00005555
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00200000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x02700270
> + 0x00000270
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x00800080
> + 0x01a20080
> + 0x00000003
> + 0x00000000
> + 0x00030000
> + 0x00000200
> + 0x00000000
> + 0x51315152
> + 0xc0013150
> + 0x020000c0
> + 0x00100001
> + 0x07064208
> + 0x000f0c18
> + 0x01000140
> + 0x00000c20
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00400320
> + 0x00000040
> + 0x00806420
> + 0x00917531
> + 0x00806420
> + 0x01917531
> + 0x00020003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x0a418820
> + 0x103f0000
> + 0x0000003f
> + 0x00038055
> + 0x03800380
> + 0x03800380
> + 0x00000380
> + 0x42080010
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00400320
> + 0x00000040
> + 0x00008eca
> + 0x00009fdb
> + 0x00008eca
> + 0x01009fdb
> + 0x00020003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x0004a0e6
> + 0x080f0000
> + 0x0000000f
> + 0x00038055
> + 0x03800380
> + 0x03800380
> + 0x00000380
> + 0x42080010
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00800000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00400320
> + 0x00000040
> + 0x00008eca
> + 0x00009fdb
> + 0x00008eca
> + 0x01009fdb
> + 0x00020003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x000556aa
> + 0x000aaaaa
> + 0x000aa955
> + 0x00055555
> + 0x000b3133
> + 0x0004cd33
> + 0x0004cecc
> + 0x000b32cc
> + 0x1ee6b16a
> + 0x10000000
> + 0x00000000
> + 0x00038055
> + 0x03800380
> + 0x03800380
> + 0x00000380
> + 0x42080010
> + 0x00000003
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000001
> + 0x00000000
> + 0x01000005
> + 0x04000f00
> + 0x00020040
> + 0x00020055
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000050
> + 0x00000000
> + 0x00010100
> + 0x00000601
> + 0x00000000
> + 0x00006400
> + 0x01221102
> + 0x00000000
> + 0x00051f00
> + 0x051f051f
> + 0x051f051f
> + 0x00030003
> + 0x03000300
> + 0x00000300
> + 0x01221102
> + 0x00000000
> + 0x00000000
> + 0x04020000
> + 0x00000001
> + 0x00000011
> + 0x00000011
> + 0x00000400
> + 0x00000000
> + 0x00000011
> + 0x00000011
> + 0x00004410
> + 0x00004410
> + 0x00004410
> + 0x00004410
> + 0x00004410
> + 0x00000011
> + 0x00004410
> + 0x00000011
> + 0x00004410
> + 0x00000011
> + 0x00004410
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x04000000
> + 0x00000000
> + 0x00000000
> + 0x00000508
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0x00000000
> + 0xe4000000
> + 0x00000000
> + 0x00000000
> + 0x01010000
> + 0x00000000
> + >;
> +};
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
2019-04-16 11:10 ` [U-Boot] " Robin Murphy
@ 2019-04-17 11:09 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-17 11:09 UTC (permalink / raw)
To: Robin Murphy
Cc: U-Boot-Denx, Simon Glass, Kever Yang,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Akash Gajjar,
Philipp Tomsich, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/
On Tue, Apr 16, 2019 at 4:40 PM Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org> wrote:
>
> On 16/04/2019 11:56, Jagan Teki wrote:
> > sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
> > indeed failed to detect the sdcard on the board with below error
> >
> > Card did not respond to voltage select!
> >
> > So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
> > is already defined in rk3399.dts so make use of same like
> > other boards.
>
> I guess the U-Boot dwmmc driver doesn't support using a GPIO? The reason
> we do this for Linux is that the dedicated function is not compatible
> with runtime power management - once we see that no card is present and
> suspend the idle controller, the CD logic is also powered off and thus
> no longer capable of generating the interrupt necessary to wake
> everything up again. The GPIO function of the same pin, however, is in
> an always-on power domain so is able to do the right thing.
I can see these gpio pins were managed via
drivers/pinctrl/rockchip/pinctrl-rk3399.c and drivers/gpio/rk_gpio.c .
On the other hand other boards do use RKFUNC_1 for CD pin(even in
Linux) but what is different in nanopi4? do other boards are yet to
change?
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
@ 2019-04-17 11:09 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-17 11:09 UTC (permalink / raw)
To: u-boot
On Tue, Apr 16, 2019 at 4:40 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 16/04/2019 11:56, Jagan Teki wrote:
> > sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
> > indeed failed to detect the sdcard on the board with below error
> >
> > Card did not respond to voltage select!
> >
> > So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
> > is already defined in rk3399.dts so make use of same like
> > other boards.
>
> I guess the U-Boot dwmmc driver doesn't support using a GPIO? The reason
> we do this for Linux is that the dedicated function is not compatible
> with runtime power management - once we see that no card is present and
> suspend the idle controller, the CD logic is also powered off and thus
> no longer capable of generating the interrupt necessary to wake
> everything up again. The GPIO function of the same pin, however, is in
> an always-on power domain so is able to do the right thing.
I can see these gpio pins were managed via
drivers/pinctrl/rockchip/pinctrl-rk3399.c and drivers/gpio/rk_gpio.c .
On the other hand other boards do use RKFUNC_1 for CD pin(even in
Linux) but what is different in nanopi4? do other boards are yet to
change?
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
2019-04-17 7:40 ` [U-Boot] " Kever Yang
@ 2019-04-17 11:11 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-17 11:11 UTC (permalink / raw)
To: Kever Yang; +Cc: U-Boot-Denx, linux-rockchip, Akash Gajjar, linux-amarula
On Wed, Apr 17, 2019 at 1:10 PM Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Hi Jagan,
>
>
> On 04/16/2019 06:56 PM, Jagan Teki wrote:
> > Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
> > engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
> >
> > Full credits to 'Liviu Dudau' who is the real author for this change.
> >
> > Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
>
> Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
> I think it should able to work.
I supposed to take the same, but thought that it would be some samsung
specific setting. but seems like it is nearly same and it worked. will
update to use this. thanks!
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
@ 2019-04-17 11:11 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-17 11:11 UTC (permalink / raw)
To: u-boot
On Wed, Apr 17, 2019 at 1:10 PM Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Hi Jagan,
>
>
> On 04/16/2019 06:56 PM, Jagan Teki wrote:
> > Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
> > engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
> >
> > Full credits to 'Liviu Dudau' who is the real author for this change.
> >
> > Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
>
> Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
> I think it should able to work.
I supposed to take the same, but thought that it would be some samsung
specific setting. but seems like it is nearly same and it worked. will
update to use this. thanks!
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 00/14] rockchip: Add new rk3399 boards
2019-04-16 11:58 ` [U-Boot] " Paul Kocialkowski
@ 2019-04-17 11:19 ` Jagan Teki
-1 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-17 11:19 UTC (permalink / raw)
To: Paul Kocialkowski
Cc: U-Boot-Denx, linux-rockchip, Akash Gajjar, linux-amarula
Hi Paul,
On Tue, Apr 16, 2019 at 5:29 PM Paul Kocialkowski
<paul.kocialkowski@bootlin.com> wrote:
>
> Hi,
>
> Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> > This series is combination of previous version[1] plus new rk3399
> > boards addition.
>
> Thanks for following-up on this series!
>
> > Overall this series add support below rk3399 boards
> > - Orangepi RK3399
> > - Nanopc T4
> > - Nanopi M4
> > - Nanopi NEO4
> > - Orangepi RK3399
> > - Rockpro64
> >
> > All the respective dts(i) files are synced from Linux 5.1-rc2 and few
> > dts(i) from linux-next.
> >
> > Nanopi NEO4, Rockpro64 are supporting via Rockchip miniloader, and rest
> > support both Rockchip miniloader along with U-Boot SPL.
> >
> > - Rockpro64, is not possible to boot via U-Boot SPL since it has dependency with LPDDR4
> > code which is work-in-progress and as soon it arrived in mailing list, will update the
> > same with ddr dtsi.
> > - Nanopi NEO4 has some ddr issue with[2] rk3399-sdram-ddr3-1866.dtsi,
> > will update the same with U-Boot SPL once it is fixed.
Thanks for your time on reviewing the series.
>
> Has the status evolved since? It looks like both have SPL enabled in
For rockpro64, I'm trying hard to get things up. neo4 I have tried
many options to dig into existing rk3399-sdram-ddr3-1866.dtsi to
produce 1GB timings but not succeed at the end.
> this series. If the SPL doesn't support DRAM configuration yet, it
> should probably be explicitly disabled.
True, indeed I even tried of disabling SPL for these boards but it
rather bit hard to manage lot of Kconfig options to rework since
rk3399 make the boards do use SPL by default. Since the work for ddr
in-progress I mark it as it is.
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 00/14] rockchip: Add new rk3399 boards
@ 2019-04-17 11:19 ` Jagan Teki
0 siblings, 0 replies; 68+ messages in thread
From: Jagan Teki @ 2019-04-17 11:19 UTC (permalink / raw)
To: u-boot
Hi Paul,
On Tue, Apr 16, 2019 at 5:29 PM Paul Kocialkowski
<paul.kocialkowski@bootlin.com> wrote:
>
> Hi,
>
> Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit :
> > This series is combination of previous version[1] plus new rk3399
> > boards addition.
>
> Thanks for following-up on this series!
>
> > Overall this series add support below rk3399 boards
> > - Orangepi RK3399
> > - Nanopc T4
> > - Nanopi M4
> > - Nanopi NEO4
> > - Orangepi RK3399
> > - Rockpro64
> >
> > All the respective dts(i) files are synced from Linux 5.1-rc2 and few
> > dts(i) from linux-next.
> >
> > Nanopi NEO4, Rockpro64 are supporting via Rockchip miniloader, and rest
> > support both Rockchip miniloader along with U-Boot SPL.
> >
> > - Rockpro64, is not possible to boot via U-Boot SPL since it has dependency with LPDDR4
> > code which is work-in-progress and as soon it arrived in mailing list, will update the
> > same with ddr dtsi.
> > - Nanopi NEO4 has some ddr issue with[2] rk3399-sdram-ddr3-1866.dtsi,
> > will update the same with U-Boot SPL once it is fixed.
Thanks for your time on reviewing the series.
>
> Has the status evolved since? It looks like both have SPL enabled in
For rockpro64, I'm trying hard to get things up. neo4 I have tried
many options to dig into existing rk3399-sdram-ddr3-1866.dtsi to
produce 1GB timings but not succeed at the end.
> this series. If the SPL doesn't support DRAM configuration yet, it
> should probably be explicitly disabled.
True, indeed I even tried of disabling SPL for these boards but it
rather bit hard to manage lot of Kconfig options to rework since
rk3399 make the boards do use SPL by default. Since the work for ddr
in-progress I mark it as it is.
Jagan.
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
2019-04-17 11:11 ` [U-Boot] " Jagan Teki
@ 2019-04-18 2:57 ` Kever Yang
-1 siblings, 0 replies; 68+ messages in thread
From: Kever Yang @ 2019-04-18 2:57 UTC (permalink / raw)
To: Jagan Teki; +Cc: U-Boot-Denx, linux-rockchip, Akash Gajjar, linux-amarula
Hi Jagan,
On 04/17/2019 07:11 PM, Jagan Teki wrote:
> On Wed, Apr 17, 2019 at 1:10 PM Kever Yang <kever.yang@rock-chips.com> wrote:
>> Hi Jagan,
>>
>>
>> On 04/16/2019 06:56 PM, Jagan Teki wrote:
>>> Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
>>> engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
>>>
>>> Full credits to 'Liviu Dudau' who is the real author for this change.
>>>
>>> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
>>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>>> ---
>>> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
>> Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
>> I think it should able to work.
> I supposed to take the same, but thought that it would be some samsung
> specific setting. but seems like it is nearly same and it worked. will
> update to use this. thanks!
I have check with rockchip dram driver owner, this setting is more generic
while the -samsung- dtsi is more for dedicate chromebook.
So I think we can merge this patch for other boards who using Rockchip
reference design.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
@ 2019-04-18 2:57 ` Kever Yang
0 siblings, 0 replies; 68+ messages in thread
From: Kever Yang @ 2019-04-18 2:57 UTC (permalink / raw)
To: u-boot
Hi Jagan,
On 04/17/2019 07:11 PM, Jagan Teki wrote:
> On Wed, Apr 17, 2019 at 1:10 PM Kever Yang <kever.yang@rock-chips.com> wrote:
>> Hi Jagan,
>>
>>
>> On 04/16/2019 06:56 PM, Jagan Teki wrote:
>>> Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
>>> engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
>>>
>>> Full credits to 'Liviu Dudau' who is the real author for this change.
>>>
>>> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
>>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>>> ---
>>> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
>> Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
>> I think it should able to work.
> I supposed to take the same, but thought that it would be some samsung
> specific setting. but seems like it is nearly same and it worked. will
> update to use this. thanks!
I have check with rockchip dram driver owner, this setting is more generic
while the -samsung- dtsi is more for dedicate chromebook.
So I think we can merge this patch for other boards who using Rockchip
reference design.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
2019-04-18 2:57 ` [U-Boot] " Kever Yang
@ 2019-04-18 6:30 ` Philipp Tomsich
-1 siblings, 0 replies; 68+ messages in thread
From: Philipp Tomsich @ 2019-04-18 6:30 UTC (permalink / raw)
To: Kever Yang
Cc: Liviu Dudau, U-Boot-Denx, Simon Glass,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Jagan Teki,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
Akash Gajjar
> On 18.04.2019, at 04:57, Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>
> Hi Jagan,
>
>
> On 04/17/2019 07:11 PM, Jagan Teki wrote:
>> On Wed, Apr 17, 2019 at 1:10 PM Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>>> Hi Jagan,
>>>
>>>
>>> On 04/16/2019 06:56 PM, Jagan Teki wrote:
>>>> Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
>>>> engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
>>>>
>>>> Full credits to 'Liviu Dudau' who is the real author for this change.
>>>>
>>>> Signed-off-by: Liviu Dudau <liviu-I3yL/QOVVjH10XsdtD+oqA@public.gmane.org>
>>>> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
>>>> ---
>>>> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
>>> Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
>>> I think it should able to work.
>> I supposed to take the same, but thought that it would be some samsung
>> specific setting. but seems like it is nearly same and it worked. will
>> update to use this. thanks!
>
> I have check with rockchip dram driver owner, this setting is more generic
> while the -samsung- dtsi is more for dedicate chromebook.
> So I think we can merge this patch for other boards who using Rockchip
> reference design.
>
> Reviewed-by: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
@ 2019-04-18 6:30 ` Philipp Tomsich
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Tomsich @ 2019-04-18 6:30 UTC (permalink / raw)
To: u-boot
> On 18.04.2019, at 04:57, Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Hi Jagan,
>
>
> On 04/17/2019 07:11 PM, Jagan Teki wrote:
>> On Wed, Apr 17, 2019 at 1:10 PM Kever Yang <kever.yang@rock-chips.com> wrote:
>>> Hi Jagan,
>>>
>>>
>>> On 04/16/2019 06:56 PM, Jagan Teki wrote:
>>>> Add sdram dtsi file for 4GB LPDDR3-1866 DMC settings by reverse
>>>> engineered from the rk3399_ddr_933Mhz_v1.14.bin file.
>>>>
>>>> Full credits to 'Liviu Dudau' who is the real author for this change.
>>>>
>>>> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
>>>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>>>> ---
>>>> .../arm/dts/rk3399-sdram-lpddr3-4GB-1866.dtsi | 1535 +++++++++++++++++
>>> Could you use rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi directly?
>>> I think it should able to work.
>> I supposed to take the same, but thought that it would be some samsung
>> specific setting. but seems like it is nearly same and it worked. will
>> update to use this. thanks!
>
> I have check with rockchip dram driver owner, this setting is more generic
> while the -samsung- dtsi is more for dedicate chromebook.
> So I think we can merge this patch for other boards who using Rockchip
> reference design.
>
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
^ permalink raw reply [flat|nested] 68+ messages in thread
end of thread, other threads:[~2019-04-18 6:30 UTC | newest]
Thread overview: 68+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-16 10:56 [PATCH v2 00/14] rockchip: Add new rk3399 boards Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 10:56 ` [PATCH v2 01/14] rockchip: dts: rk3399: Sync rk3399-opp from Linux Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 11:59 ` Paul Kocialkowski
2019-04-16 11:59 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 02/14] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 03/14] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:01 ` Paul Kocialkowski
2019-04-16 12:01 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 05/14] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:02 ` Paul Kocialkowski
2019-04-16 12:02 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 06/14] rockchip: rk3399: Add Orangepi RK3399 support Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:03 ` Paul Kocialkowski
2019-04-16 12:03 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 07/14] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 11:10 ` Robin Murphy
2019-04-16 11:10 ` [U-Boot] " Robin Murphy
[not found] ` <148886f2-b1f2-8e90-c6cc-00fd49d98c86-5wv7dgnIgG8@public.gmane.org>
2019-04-17 11:09 ` Jagan Teki
2019-04-17 11:09 ` [U-Boot] " Jagan Teki
2019-04-16 10:56 ` [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
2019-04-17 7:40 ` [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】 Kever Yang
2019-04-17 7:40 ` [U-Boot] " Kever Yang
2019-04-17 11:11 ` Jagan Teki
2019-04-17 11:11 ` [U-Boot] " Jagan Teki
2019-04-18 2:57 ` Kever Yang
2019-04-18 2:57 ` [U-Boot] " Kever Yang
[not found] ` <12b48e92-be80-3600-6ab2-2c0d4c132603-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2019-04-18 6:30 ` Philipp Tomsich
2019-04-18 6:30 ` [U-Boot] " Philipp Tomsich
2019-04-16 10:56 ` [PATCH v2 10/14] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-11-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 11/14] rockchip: rk3399: Add Nanopc T4 " Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-12-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:05 ` Paul Kocialkowski
2019-04-16 12:05 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 12/14] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-13-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:06 ` Paul Kocialkowski
2019-04-16 12:06 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 13/14] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-14-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:07 ` Paul Kocialkowski
2019-04-16 12:07 ` [U-Boot] " Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 14/14] doc: rockchip: Add global doc for rk3399 build/flash Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
2019-04-16 11:58 ` [PATCH v2 00/14] rockchip: Add new rk3399 boards Paul Kocialkowski
2019-04-16 11:58 ` [U-Boot] " Paul Kocialkowski
2019-04-17 11:19 ` Jagan Teki
2019-04-17 11:19 ` [U-Boot] " Jagan Teki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.