* I only see one CPU core on Xen when booted via grub
@ 2018-01-22 17:28 msd+xen-devel
2018-01-22 17:45 ` Roger Pau Monné
2018-01-23 9:10 ` Jan Beulich
0 siblings, 2 replies; 9+ messages in thread
From: msd+xen-devel @ 2018-01-22 17:28 UTC (permalink / raw)
To: xen-devel
Hi,
I only see 1 CPU core on Xen 4.9 when booted via grub instead of 8.
It's may be related to :
- https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=820807
- https://xenproject.atlassian.net/browse/XEN-42
It is the first server on which I have this problem.
I can confirm that :
- if I boot Debian througt grub, I see the 8 cores
- if I boot Xen through grub, I only see _one_ core
- if I boot Xen directly through EFI (using `efibootmgr`), I see the 8 cores
1. Do you know what happens ?
2. Do you need some logs ?
Regards,
Guillaume
# cat /proc/cpuinfo
model name : Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz
microcode : 0x5e
flags : fpu de tsc msr pae mce cx8 apic sep mca cmov pat
clflush acpi mmx fxsr sse sse2 ht syscall nx lm constant_tsc
arch_perfmon rep_good nopl nonstop_tsc eagerfpu pni pclmulqdq monitor
est ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand
hypervisor lahf_lm abm 3dnowprefetch epb fsgsbase bmi1 hle avx2 bmi2
erms rtm rdseed adx clflushopt xsaveopt xsavec xgetbv1 dtherm ida arat
pln pts hwp hwp_notify hwp_act_window hwp_epp
# xl info
release : 4.9.0-5-amd64
version : #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
xen_version : 4.8.3-pre
# cat /etc/debian_version
9.3
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-22 17:28 I only see one CPU core on Xen when booted via grub msd+xen-devel
@ 2018-01-22 17:45 ` Roger Pau Monné
2018-01-23 9:27 ` msd+xen-devel
2018-01-23 9:10 ` Jan Beulich
1 sibling, 1 reply; 9+ messages in thread
From: Roger Pau Monné @ 2018-01-22 17:45 UTC (permalink / raw)
To: msd+xen-devel; +Cc: xen-devel
On Mon, Jan 22, 2018 at 06:28:17PM +0100, msd+xen-devel@msd.im wrote:
> Hi,
>
> I only see 1 CPU core on Xen 4.9 when booted via grub instead of 8.
>
> It's may be related to :
> - https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=820807
> - https://xenproject.atlassian.net/browse/XEN-42
>
> It is the first server on which I have this problem.
>
> I can confirm that :
> - if I boot Debian througt grub, I see the 8 cores
> - if I boot Xen through grub, I only see _one_ core
> - if I boot Xen directly through EFI (using `efibootmgr`), I see the 8 cores
>
> 1. Do you know what happens ?
> 2. Do you need some logs ?
You should provide the output of `xl dmesg` from Xen. And ideally boot
with an hypervisor that's been built with debug support. dmesg from
Linux might also be interesting (both when booted as Dom0 and bare
metal).
Thanks, Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-22 17:28 I only see one CPU core on Xen when booted via grub msd+xen-devel
2018-01-22 17:45 ` Roger Pau Monné
@ 2018-01-23 9:10 ` Jan Beulich
2018-01-23 9:39 ` msd+xen-devel
1 sibling, 1 reply; 9+ messages in thread
From: Jan Beulich @ 2018-01-23 9:10 UTC (permalink / raw)
To: msd+xen-devel; +Cc: xen-devel
>>> On 22.01.18 at 18:28, <msd+xen-devel@msd.im> wrote:
> I only see 1 CPU core on Xen 4.9 when booted via grub instead of 8.
>
> It's may be related to :
> - https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=820807
> - https://xenproject.atlassian.net/browse/XEN-42
While this suggests you've indeed tried to look around a little, ...
> It is the first server on which I have this problem.
>
> I can confirm that :
> - if I boot Debian througt grub, I see the 8 cores
> - if I boot Xen through grub, I only see _one_ core
> - if I boot Xen directly through EFI (using `efibootmgr`), I see the 8 cores
>
> 1. Do you know what happens ?
... your report is very likely duplicating earlier ones where the
ACPI root point cannot be found without it being properly
propagated through by grub from EFI to Xen. Iirc the only
way around that is to chainload xen.efi, if the grub used
doesn't support the extensions needed to boot Xen via the
multiboot2 protocol (support for which was added during the
4.9 development cycle).
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-22 17:45 ` Roger Pau Monné
@ 2018-01-23 9:27 ` msd+xen-devel
0 siblings, 0 replies; 9+ messages in thread
From: msd+xen-devel @ 2018-01-23 9:27 UTC (permalink / raw)
To: Roger Pau Monné, xen-devel
[-- Attachment #1: Type: text/plain, Size: 1323 bytes --]
Hi,
I think there is something linked with ACPI failing when there is only
one core detected.
> You should provide the output of `xl dmesg` from Xen
I attached some files, tell me if it's ok for you.
> And ideally boot with an hypervisor that's been built with debug support.
Do you know if there is a package in Debian 9 for that ? And how can I
activate it ?
Guillaume
Le 22/01/2018 à 18:45, Roger Pau Monné a écrit :
> On Mon, Jan 22, 2018 at 06:28:17PM +0100, msd+xen-devel@msd.im wrote:
>> Hi,
>>
>> I only see 1 CPU core on Xen 4.9 when booted via grub instead of 8.
>>
>> It's may be related to :
>> - https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=820807
>> - https://xenproject.atlassian.net/browse/XEN-42
>>
>> It is the first server on which I have this problem.
>>
>> I can confirm that :
>> - if I boot Debian througt grub, I see the 8 cores
>> - if I boot Xen through grub, I only see _one_ core
>> - if I boot Xen directly through EFI (using `efibootmgr`), I see the 8 cores
>>
>> 1. Do you know what happens ?
>> 2. Do you need some logs ?
>
> You should provide the output of `xl dmesg` from Xen. And ideally boot
> with an hypervisor that's been built with debug support. dmesg from
> Linux might also be interesting (both when booted as Dom0 and bare
> metal).
>
> Thanks, Roger.
>
[-- Attachment #2: efi-grub-xen_dmesg_1-core.txt --]
[-- Type: text/plain, Size: 51007 bytes --]
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[ 0.000000] Command line: placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash acpi=off
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] Xen: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000881c5fff] usable
[ 0.000000] Xen: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000881c7000-0x0000000088210fff] reserved
[ 0.000000] Xen: [mem 0x0000000088211000-0x0000000088282fff] usable
[ 0.000000] Xen: [mem 0x0000000088283000-0x0000000088302fff] type 20
[ 0.000000] Xen: [mem 0x0000000088303000-0x0000000089ec1fff] reserved
[ 0.000000] Xen: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS
[ 0.000000] Xen: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data
[ 0.000000] Xen: [mem 0x0000000089fff000-0x0000000089ffffff] usable
[ 0.000000] Xen: [mem 0x000000008a000000-0x000000008bffffff] reserved
[ 0.000000] Xen: [mem 0x0000000090000000-0x0000000095ffffff] reserved
[ 0.000000] Xen: [mem 0x0000000098000000-0x000000009dffffff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved
[ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x0000000861ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01f36000, 0x01f36fff] PGTABLE
[ 0.000000] BRK [0x01f37000, 0x01f37fff] PGTABLE
[ 0.000000] BRK [0x01f38000, 0x01f38fff] PGTABLE
[ 0.000000] BRK [0x01f39000, 0x01f39fff] PGTABLE
[ 0.000000] BRK [0x01f3a000, 0x01f3afff] PGTABLE
[ 0.000000] BRK [0x01f3b000, 0x01f3bfff] PGTABLE
[ 0.000000] BRK [0x01f3c000, 0x01f3cfff] PGTABLE
[ 0.000000] BRK [0x01f3d000, 0x01f3dfff] PGTABLE
[ 0.000000] BRK [0x01f3e000, 0x01f3efff] PGTABLE
[ 0.000000] BRK [0x01f3f000, 0x01f3ffff] PGTABLE
[ 0.000000] BRK [0x01f40000, 0x01f40fff] PGTABLE
[ 0.000000] BRK [0x01f41000, 0x01f41fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x02000000-0x0338efff]
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7cbc65000-0x7cbc69fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff]
[ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff]
[ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff]
[ 0.000000] On node 0 totalpages: 8298966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8649 pages used for memmap
[ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31
[ 0.000000] Normal zone: 120960 pages used for memmap
[ 0.000000] Normal zone: 7741440 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 491049 page(s)
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Boot CPU (id 255) not listed by BIOS
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x88302fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88303000-0x89ec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.3-pre (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff880843800000 s105304 r8192 d29864 u2097152
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8169272
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x83f800000-0x843800000] (64MB) mapped at [ffff88083f800000-ffff8808437fffff]
[ 0.000000] Memory: 31943512K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 1252352K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:33024 nr_irqs:32 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3800.000 MHz processor
[ 3.285631] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.11 BogoMIPS (lpj=15168224)
[ 3.285635] pid_max: default: 32768 minimum: 301
[ 3.285820] Security Framework initialized
[ 3.285822] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 3.285827] AppArmor: AppArmor disabled by boot time parameter
[ 3.288525] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 3.292764] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 3.294288] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.294330] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.294555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 3.294557] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 3.294562] CPU: Physical Processor ID: 0
[ 3.294563] CPU: Processor Core ID: 0
[ 3.294567] mce: CPU supports 2 MCE banks
[ 3.294581] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 3.294583] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 3.309350] Freeing SMP alternatives memory: 24K
[ 3.310349] ftrace: allocating 25212 entries in 99 pages
[ 3.316354] cpu 0 spinlock event irq 1
[ 3.316358] smpboot: Max logical packages: 1
[ 3.316360] VPMU disabled by hypervisor.
[ 3.316368] Performance Events: Skylake events, PMU not available due to virtualization, using software events only.
[ 3.316724] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 3.316726] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 3.316733] x86: Booted up 1 node, 1 CPUs
[ 3.317212] devtmpfs: initialized
[ 3.317243] x86/mm: Memory block size: 128MB
[ 3.320135] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes)
[ 3.320139] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes)
[ 3.320170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.320177] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 3.320193] pinctrl core: initialized pinctrl subsystem
[ 3.320248] NET: Registered protocol family 16
[ 3.320254] xen:grant_table: Grant tables using version 1 layout
[ 3.320259] Grant table initialized
[ 3.320425] PCI: Using configuration type 1 for base access
[ 3.321149] ACPI: Interpreter disabled.
[ 3.321154] xen:balloon: Initialising balloon driver
[ 3.323552] xen_balloon: Initialising balloon driver
[ 3.323588] vgaarb: loaded
[ 3.323604] dmi: Firmware registration failed.
[ 3.323620] PCI: Probing PCI hardware
[ 3.323622] PCI: root bus 00: using default resources
[ 3.323623] PCI: Probing PCI hardware (bus 00)
[ 3.323636] PCI host bridge to bus 0000:00
[ 3.323639] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.323641] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 3.323643] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 3.323654] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000
[ 3.323800] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 3.323825] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit]
[ 3.323916] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.323966] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 3.323991] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit]
[ 3.324143] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 3.324182] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit]
[ 3.324319] pci 0000:00:16.0: PME# supported from D3hot
[ 3.324405] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
[ 3.324449] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit]
[ 3.324612] pci 0000:00:16.1: PME# supported from D3hot
[ 3.324702] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 3.324722] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff]
[ 3.324732] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff]
[ 3.324742] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047]
[ 3.324751] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b]
[ 3.324761] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
[ 3.324771] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff]
[ 3.324825] pci 0000:00:17.0: PME# supported from D3hot
[ 3.324888] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
[ 3.324966] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.325013] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 3.325092] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 3.325135] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 3.325214] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 3.325271] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 3.325432] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 3.325443] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff]
[ 3.325538] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 3.325577] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit]
[ 3.325627] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f]
[ 3.325783] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
[ 3.325804] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref]
[ 3.325820] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff]
[ 3.325836] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff]
[ 3.325898] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 3.326039] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 3.326046] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.326058] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 3.326065] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 3.326070] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 3.326141] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 3.326162] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff]
[ 3.326194] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
[ 3.326210] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff]
[ 3.326344] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 3.336359] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 3.336363] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 3.336366] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 3.336444] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 3.336465] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff]
[ 3.336497] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 3.336513] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff]
[ 3.336648] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 3.348366] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 3.348371] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 3.348374] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 3.348399] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[ 3.348766] PCI: pci_cache_line_size set to 64 bytes
[ 3.348858] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 3.348859] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 3.348860] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff]
[ 3.348860] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff]
[ 3.348861] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
[ 3.348861] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff]
[ 3.348942] clocksource: Switched to clocksource xen
[ 3.352624] VFS: Disk quotas dquot_6.6.0
[ 3.352633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.352645] hugetlbfs: disabling because there are no supported hugepage sizes
[ 3.352661] pnp: PnP ACPI: disabled
[ 3.353303] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 3.353333] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref]
[ 3.353336] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 3.353342] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 3.353346] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 3.353353] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 3.353356] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 3.353362] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 3.353371] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 3.353374] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 3.353379] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 3.353388] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 3.353389] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 3.353390] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff]
[ 3.353390] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref]
[ 3.353391] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 3.353391] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff]
[ 3.353392] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 3.353393] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff]
[ 3.353408] NET: Registered protocol family 2
[ 3.353629] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 3.353875] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.353948] TCP: Hash tables configured (established 262144 bind 65536)
[ 3.353993] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 3.354071] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 3.354126] NET: Registered protocol family 1
[ 3.354141] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 3.354529] PCI: CLS 128 bytes, default 64
[ 3.354551] Unpacking initramfs...
[ 3.568900] Freeing initrd memory: 20028K
[ 3.568988] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.569109] audit: initializing netlink subsys (disabled)
[ 3.569121] audit: type=2000 audit(1516697156.038:1): initialized
[ 3.569311] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 3.569322] zbud: loaded
[ 3.569602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.569614] io scheduler noop registered
[ 3.569616] io scheduler deadline registered
[ 3.569622] io scheduler cfq registered (default)
[ 3.569655] pcieport 0000:00:1d.0: can't find IRQ for PCI INT B; please try using pci=biosirq
[ 3.569750] pcieport 0000:00:1d.2: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 3.569830] pcieport 0000:00:1d.3: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 3.569926] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[ 3.569929] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.569933] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[ 3.569946] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[ 3.569948] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.569953] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[ 3.569964] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[ 3.569966] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.569971] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[ 3.569974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.569978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.569985] intel_idle: MWAIT substates: 0x142120
[ 3.569986] intel_idle: v0.4.1 model 0x9E
[ 3.569987] intel_idle: intel_idle yielding to none
[ 3.570150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.591185] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.591350] Linux agpgart interface v0.103
[ 3.591372] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.591374] AMD IOMMUv2 functionality not available on this system
[ 3.591423] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.679429] i8042: No controller found
[ 4.679435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5210d88ec, max_idle_ns: 881591073901 ns
[ 4.679465] mousedev: PS/2 mouse device common for all mice
[ 4.679780] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 4.679833] genirq: Flags mismatch irq 8. 00000080 (rtc0) vs. 00000000 (xen-pcpu)
[ 4.679848] rtc_cmos: probe of rtc_cmos failed with error -16
[ 4.679853] intel_pstate: Intel P-state driver initializing
[ 4.679865] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.679867] dmi-sysfs: dmi entry is absent.
[ 4.679918] NET: Registered protocol family 10
[ 4.680011] mip6: Mobile IPv6
[ 4.680013] NET: Registered protocol family 17
[ 4.680015] mpls_gso: MPLS GSO support
[ 4.680041] mce: Unable to init device /dev/mcelog (rc: -16)
[ 4.680069] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 4.680085] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.680135] registered taskstats version 1
[ 4.680142] zswap: loaded using pool lzo/zbud
[ 4.680194] ima: No TPM chip found, activating TPM-bypass!
[ 4.680364] hctosys: unable to open rtc device (rtc0)
[ 4.680397] PM: Hibernation image not present or could not be loaded.
[ 4.680622] Freeing unused kernel memory: 1408K
[ 4.680624] Write protecting the kernel read-only data: 12288k
[ 4.682593] Freeing unused kernel memory: 1980K
[ 4.682857] Freeing unused kernel memory: 1248K
[ 4.703174] x86/mm: Checked W+X mappings: FAILED, 4090 W+X pages found.
[ 4.719646] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.719676] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720221] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720263] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720303] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720342] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720383] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720424] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720461] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720500] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.742881] SCSI subsystem initialized
[ 4.747777] usbcore: registered new interface driver usbfs
[ 4.747784] usbcore: registered new interface driver hub
[ 4.749887] usbcore: registered new device driver usb
[ 4.750536] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.750564] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.750568] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 4.751635] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 4.751642] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 4.752412] pps_core: LinuxPPS API ver. 1 registered
[ 4.752415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.752527] PTP clock support registered
[ 4.752623] dca service started, version 1.12.1
[ 4.753366] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 4.753368] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.753396] igb 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.754087] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
[ 4.756562] libata version 3.00 loaded.
[ 4.758898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.758901] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.758904] usb usb1: Product: xHCI Host Controller
[ 4.758906] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 4.758908] usb usb1: SerialNumber: 0000:00:14.0
[ 4.758967] hub 1-0:1.0: USB hub found
[ 4.758983] hub 1-0:1.0: 16 ports detected
[ 4.759739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.759742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.759764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.759766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.759769] usb usb2: Product: xHCI Host Controller
[ 4.759770] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 4.759772] usb usb2: SerialNumber: 0000:00:14.0
[ 4.760127] hub 2-0:1.0: USB hub found
[ 4.760141] hub 2-0:1.0: 10 ports detected
[ 4.760563] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[ 4.760577] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 4.760589] i801_smbus 0000:00:1f.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.760606] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 4.760622] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 0003ce00 (timer0)
[ 4.760625] i801_smbus 0000:00:1f.4: Failed to allocate irq 0: -16
[ 4.760627] i801_smbus 0000:00:1f.4: SMBus using polling
[ 4.760786] ahci 0000:00:17.0: version 3.0
[ 4.760794] ahci 0000:00:17.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.762635] AVX2 version of gcm_enc/dec engaged.
[ 4.762637] AES CTR mode by8 optimization enabled
[ 4.770945] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 4.770949] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 4.778403] pps pps0: new PPS source ptp0
[ 4.778406] igb 0000:02:00.0: added PHC on eth0
[ 4.778408] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.778410] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00
[ 4.778459] igb 0000:02:00.0: eth0: PBA No: 006200-000
[ 4.778461] igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 4.778533] igb 0000:03:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.779219] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
[ 4.802837] pps pps1: new PPS source ptp1
[ 4.802840] igb 0000:03:00.0: added PHC on eth1
[ 4.802842] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.802844] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01
[ 4.802893] igb 0000:03:00.0: eth1: PBA No: 006200-000
[ 4.802895] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 4.805179] igb 0000:02:00.0 enp2s0: renamed from eth0
[ 4.807764] igb 0000:03:00.0 enp3s0: renamed from eth1
[ 4.853908] scsi host0: ahci
[ 4.854029] scsi host1: ahci
[ 4.854140] scsi host2: ahci
[ 4.854250] scsi host3: ahci
[ 4.854361] scsi host4: ahci
[ 4.854469] scsi host5: ahci
[ 4.854578] scsi host6: ahci
[ 4.854687] scsi host7: ahci
[ 4.854713] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 18
[ 4.854716] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 18
[ 4.854719] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 18
[ 4.854722] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 18
[ 4.854725] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 18
[ 4.854728] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 18
[ 4.854731] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 18
[ 4.854734] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 18
[ 5.084947] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 5.167122] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.167139] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.167151] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.167164] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.167178] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.167189] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.171107] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.171120] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.185427] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 5.185429] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.185723] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 5.185725] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.190991] ata1.00: configured for UDMA/133
[ 5.191049] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 5.191290] ata2.00: configured for UDMA/133
[ 5.191335] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 5.194206] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 5.194213] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 5.194236] sd 0:0:0:0: [sda] Write Protect is off
[ 5.194238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.194241] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.194243] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.194251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.194256] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.240713] sda: sda1 sda2 sda3 sda4
[ 5.240856] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.242292] sdb: sdb1 sdb2 sdb3 sdb4
[ 5.242682] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.246039] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10
[ 5.246042] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.246044] usb 1-1: Product: Virtual Keyboard and Mouse
[ 5.246046] usb 1-1: Manufacturer: American Megatrends Inc.
[ 5.246048] usb 1-1: SerialNumber: serial
[ 5.247891] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.249601] usbcore: registered new interface driver usbhid
[ 5.249603] usbhid: USB HID core driver
[ 5.250150] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
[ 5.250804] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
[ 5.250879] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
[ 5.250914] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
[ 5.339325] random: fast init done
[ 5.440252] md: bind<sdb4>
[ 5.508791] md: bind<sda4>
[ 5.565775] md: raid1 personality registered for level 1
[ 5.565947] md/raid1:md4: active with 2 out of 2 mirrors
[ 5.566153] created bitmap (29 pages) for device md4
[ 5.566786] md4: bitmap initialized from disk: read 2 pages, set 0 of 59234 bits
[ 5.580596] md: bind<sdb2>
[ 5.602555] md4: detected capacity change from 0 to 3975079198720
[ 5.604621] md: bind<sda2>
[ 5.607062] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.607073] md2: detected capacity change from 0 to 20970405888
[ 5.690051] clocksource: Switched to clocksource tsc
[ 5.835355] device-mapper: uevent: version 1.0.3
[ 5.835517] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 6.847797] random: crng init done
[ 7.524866] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.524870] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.528421] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.531445] sis900.c: v1.08.10 Apr. 2 2006
[ 7.534495] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 7.538602] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.538604] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.542133] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 7.542136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 7.552761] sky2: driver version 1.30
[ 7.555759] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 7.570351] megasas: 06.811.02.00-rc1
[ 7.596280] md: raid0 personality registered for level 0
[ 7.664945] raid6: sse2x1 gen() 13408 MB/s
[ 7.732944] raid6: sse2x1 xor() 9482 MB/s
[ 7.800943] raid6: sse2x2 gen() 16702 MB/s
[ 7.868945] raid6: sse2x2 xor() 11559 MB/s
[ 7.936945] raid6: sse2x4 gen() 19278 MB/s
[ 8.004944] raid6: sse2x4 xor() 13312 MB/s
[ 8.072944] raid6: avx2x1 gen() 26501 MB/s
[ 8.140944] raid6: avx2x2 gen() 31391 MB/s
[ 8.208944] raid6: avx2x4 gen() 33433 MB/s
[ 8.208945] raid6: using algorithm avx2x4 gen() 33433 MB/s
[ 8.208947] raid6: using avx2x2 recovery algorithm
[ 8.210746] xor: automatically using best checksumming function avx
[ 8.211163] async_tx: api initialized (async)
[ 8.216494] md: raid6 personality registered for level 6
[ 8.216497] md: raid5 personality registered for level 5
[ 8.216498] md: raid4 personality registered for level 4
[ 8.222164] Fusion MPT base driver 3.04.20
[ 8.222167] Copyright (c) 1999-2008 LSI Corporation
[ 8.223206] Fusion MPT SPI Host driver 3.04.20
[ 8.229819] Fusion MPT SAS Host driver 3.04.20
[ 8.235960] Fusion MPT misc device (ioctl) driver 3.04.20
[ 8.236313] mptctl: Registered with Fusion MPT base driver
[ 8.236316] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 8.250898] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 8.250902] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 8.257093] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 8.260299] QLogic/NetXen Network Driver v4.0.82
[ 8.266578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.268993] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.272109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.275580] md: linear personality registered for level -1
[ 8.277850] md: multipath personality registered for level -4
[ 8.287025] md: raid10 personality registered for level 10
[ 18.297450] Btrfs loaded, crc32c=crc32c-intel
[ 22.265076] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 22.861676] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.881329] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 22.881362] systemd[1]: Detected virtualization xen.
[ 22.881367] systemd[1]: Detected architecture x86-64.
[ 22.914477] systemd[1]: Set hostname to <y00>.
[ 23.271620] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked.
[ 23.271904] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 23.271997] systemd[1]: Listening on udev Kernel Socket.
[ 23.272114] systemd[1]: Created slice System Slice.
[ 23.272210] systemd[1]: Created slice system-getty.slice.
[ 23.272300] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 23.426245] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
[ 23.533340] systemd-journald[599]: Received request to flush runtime journal from PID 1
[ 23.789438] igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 23.913654] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 23.913663] mei_me 0000:00:16.1: Device doesn't have valid ME Interface
[ 23.917048] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.952936] iTCO_vendor_support: vendor-support=0
[ 23.962720] [drm] Initialized
[ 23.964739] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.964838] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 23.965564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.965582] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 23.975964] igb 0000:03:00.0 eno2: renamed from enp3s0
[ 24.014351] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 24.022813] mgag200 0000:01:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 24.042499] [TTM] Zone kernel: Available graphics memory: 15984100 kiB
[ 24.042501] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 24.042503] [TTM] Initializing pool allocator
[ 24.042507] [TTM] Initializing DMA pool allocator
[ 24.074527] Console: switching to colour frame buffer device 128x48
[ 24.362960] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device
[ 24.366114] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0
[ 24.484100] intel_rapl: Found RAPL domain package
[ 24.484113] intel_rapl: Found RAPL domain core
[ 24.484123] intel_rapl: Found RAPL domain dram
[ 24.522104] Adding 4094972k swap on /dev/sdb3. Priority:-1 extents:1 across:4094972k FS
[ 25.325498] Adding 4094972k swap on /dev/sda3. Priority:-2 extents:1 across:4094972k FS
[ 27.086856] xen:xen_evtchn: Event-channel device installed
[ 27.167126] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 27.185491] xenbr0: port 1(eno2) entered blocking state
[ 27.185856] xenbr0: port 1(eno2) entered disabled state
[ 27.187222] device eno2 entered promiscuous mode
[ 27.212828] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 27.217763] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 28.217119] xenbr0: port 1(eno2) entered blocking state
[ 28.217464] xenbr0: port 1(eno2) entered forwarding state
[ 28.217932] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 33.537305] xenbr0: port 2(vif1.0) entered blocking state
[ 33.537320] xenbr0: port 2(vif1.0) entered disabled state
[ 33.537428] device vif1.0 entered promiscuous mode
[ 33.538786] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 33.567607] Bridge firewalling registered
[ 34.224748] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 34.228555] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 34.308481] vif vif-1-0 vif1.0: Guest Rx ready
[ 34.308598] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
[ 34.308626] xenbr0: port 2(vif1.0) entered blocking state
[ 34.308637] xenbr0: port 2(vif1.0) entered forwarding state
[ 41.403575] xenbr0: port 3(vif2.0) entered blocking state
[ 41.403588] xenbr0: port 3(vif2.0) entered disabled state
[ 41.403676] device vif2.0 entered promiscuous mode
[ 41.491212] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
[ 42.648483] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 42.653378] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 42.815705] vif vif-2-0 vif2.0: Guest Rx ready
[ 42.815830] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
[ 42.815860] xenbr0: port 3(vif2.0) entered blocking state
[ 42.815870] xenbr0: port 3(vif2.0) entered forwarding state
[ 49.038271] xenbr0: port 4(vif3.0) entered blocking state
[ 49.038287] xenbr0: port 4(vif3.0) entered disabled state
[ 49.038393] device vif3.0 entered promiscuous mode
[ 49.039650] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
[ 49.791640] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 49.796290] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 50.326686] vif vif-3-0 vif3.0: Guest Rx ready
[ 50.326843] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
[ 50.326871] xenbr0: port 4(vif3.0) entered blocking state
[ 50.326882] xenbr0: port 4(vif3.0) entered forwarding state
[ 57.572001] xenbr0: port 5(vif4.0) entered blocking state
[ 57.572016] xenbr0: port 5(vif4.0) entered disabled state
[ 57.572264] device vif4.0 entered promiscuous mode
[ 57.573836] IPv6: ADDRCONF(NETDEV_UP): vif4.0: link is not ready
[ 58.548118] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 58.609044] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 59.463178] vif vif-4-0 vif4.0: Guest Rx ready
[ 59.463654] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready
[ 59.464027] xenbr0: port 5(vif4.0) entered blocking state
[ 59.464374] xenbr0: port 5(vif4.0) entered forwarding state
[ 64.568851] xenbr0: port 6(vif5.0) entered blocking state
[ 64.569239] xenbr0: port 6(vif5.0) entered disabled state
[ 64.569722] device vif5.0 entered promiscuous mode
[ 64.571501] IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready
[ 65.637767] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 65.656995] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 65.871871] vif vif-5-0 vif5.0: Guest Rx ready
[ 65.872361] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready
[ 65.872752] xenbr0: port 6(vif5.0) entered blocking state
[ 65.873116] xenbr0: port 6(vif5.0) entered forwarding state
[ 73.236275] xenbr0: port 7(vif6.0) entered blocking state
[ 73.236684] xenbr0: port 7(vif6.0) entered disabled state
[ 73.237215] device vif6.0 entered promiscuous mode
[ 73.238874] IPv6: ADDRCONF(NETDEV_UP): vif6.0: link is not ready
[ 74.421130] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 74.510888] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 74.928840] vif vif-6-0 vif6.0: Guest Rx ready
[ 75.093034] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready
[ 75.093422] xenbr0: port 7(vif6.0) entered blocking state
[ 75.096578] xenbr0: port 7(vif6.0) entered forwarding state
[ 79.865032] xenbr0: port 8(vif7.0) entered blocking state
[ 79.865414] xenbr0: port 8(vif7.0) entered disabled state
[ 79.865921] device vif7.0 entered promiscuous mode
[ 79.868205] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready
[ 81.194432] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 81.201982] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 81.384701] vif vif-7-0 vif7.0: Guest Rx ready
[ 81.385188] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready
[ 81.385582] xenbr0: port 8(vif7.0) entered blocking state
[ 81.385949] xenbr0: port 8(vif7.0) entered forwarding state
[ 96.973239] xenbr0: port 9(vif8.0) entered blocking state
[ 96.973607] xenbr0: port 9(vif8.0) entered disabled state
[ 96.974057] device vif8.0 entered promiscuous mode
[ 96.975688] IPv6: ADDRCONF(NETDEV_UP): vif8.0: link is not ready
[ 99.509383] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 99.577978] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 105.045686] vif vif-8-0 vif8.0: Guest Rx ready
[ 105.046199] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready
[ 105.046603] xenbr0: port 9(vif8.0) entered blocking state
[ 105.047023] xenbr0: port 9(vif8.0) entered forwarding state
[ 114.699280] xenbr0: port 10(vif9.0) entered blocking state
[ 114.699652] xenbr0: port 10(vif9.0) entered disabled state
[ 114.700122] device vif9.0 entered promiscuous mode
[ 114.702036] IPv6: ADDRCONF(NETDEV_UP): vif9.0: link is not ready
[ 115.411529] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 115.483510] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 115.890867] vif vif-9-0 vif9.0: Guest Rx ready
[ 115.895487] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready
[ 115.895875] xenbr0: port 10(vif9.0) entered blocking state
[ 115.902242] xenbr0: port 10(vif9.0) entered forwarding state
[ 125.515538] xenbr0: port 11(vif10.0) entered blocking state
[ 125.515911] xenbr0: port 11(vif10.0) entered disabled state
[ 125.516392] device vif10.0 entered promiscuous mode
[ 125.520525] IPv6: ADDRCONF(NETDEV_UP): vif10.0: link is not ready
[ 127.007594] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 127.611709] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 132.580164] vif vif-10-0 vif10.0: Guest Rx ready
[ 132.580712] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready
[ 132.581121] xenbr0: port 11(vif10.0) entered blocking state
[ 132.581509] xenbr0: port 11(vif10.0) entered forwarding state
[ 135.645365] xenbr0: port 12(vif11.0) entered blocking state
[ 135.645810] xenbr0: port 12(vif11.0) entered disabled state
[ 135.646286] device vif11.0 entered promiscuous mode
[ 135.647999] IPv6: ADDRCONF(NETDEV_UP): vif11.0: link is not ready
[ 136.330402] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 136.400596] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 136.914735] vif vif-11-0 vif11.0: Guest Rx ready
[ 136.915241] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready
[ 136.915630] xenbr0: port 12(vif11.0) entered blocking state
[ 136.916003] xenbr0: port 12(vif11.0) entered forwarding state
[ 154.602541] xenbr0: port 13(vif12.0) entered blocking state
[ 154.602933] xenbr0: port 13(vif12.0) entered disabled state
[ 154.609637] device vif12.0 entered promiscuous mode
[ 154.633296] IPv6: ADDRCONF(NETDEV_UP): vif12.0: link is not ready
[ 157.119674] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 157.178457] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 160.380829] vif vif-12-0 vif12.0: Guest Rx ready
[ 160.381334] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready
[ 160.381728] xenbr0: port 13(vif12.0) entered blocking state
[ 160.382101] xenbr0: port 13(vif12.0) entered forwarding state
[ 298.910121] xenbr0: port 2(vif1.0) entered disabled state
[ 298.929983] xenbr0: port 2(vif1.0) entered disabled state
[ 298.930393] device vif1.0 left promiscuous mode
[ 298.930756] xenbr0: port 2(vif1.0) entered disabled state
[ 302.735254] xenbr0: port 3(vif2.0) entered disabled state
[ 303.208312] xenbr0: port 3(vif2.0) entered disabled state
[ 303.209100] device vif2.0 left promiscuous mode
[ 303.210825] xenbr0: port 3(vif2.0) entered disabled state
[ 305.976555] xenbr0: port 5(vif4.0) entered disabled state
[ 306.894474] xenbr0: port 5(vif4.0) entered disabled state
[ 306.894858] device vif4.0 left promiscuous mode
[ 306.895226] xenbr0: port 5(vif4.0) entered disabled state
[ 307.068003] xenbr0: port 4(vif3.0) entered disabled state
[ 308.606199] xenbr0: port 4(vif3.0) entered disabled state
[ 308.606604] device vif3.0 left promiscuous mode
[ 308.606970] xenbr0: port 4(vif3.0) entered disabled state
[ 313.198775] xenbr0: port 12(vif11.0) entered disabled state
[ 314.219550] xenbr0: port 8(vif7.0) entered disabled state
[ 314.219903] xenbr0: port 9(vif8.0) entered disabled state
[ 314.220234] xenbr0: port 10(vif9.0) entered disabled state
[ 315.230591] xenbr0: port 13(vif12.0) entered disabled state
[ 315.230936] xenbr0: port 7(vif6.0) entered disabled state
[ 315.646899] xenbr0: port 12(vif11.0) entered disabled state
[ 315.647638] device vif11.0 left promiscuous mode
[ 315.647945] xenbr0: port 12(vif11.0) entered disabled state
[ 315.879514] xenbr0: port 13(vif12.0) entered disabled state
[ 315.879849] device vif12.0 left promiscuous mode
[ 315.880149] xenbr0: port 13(vif12.0) entered disabled state
[ 316.261866] xenbr0: port 9(vif8.0) entered disabled state
[ 316.262216] device vif8.0 left promiscuous mode
[ 316.262535] xenbr0: port 9(vif8.0) entered disabled state
[ 316.456454] xenbr0: port 7(vif6.0) entered disabled state
[ 316.456786] device vif6.0 left promiscuous mode
[ 316.457129] xenbr0: port 7(vif6.0) entered disabled state
[ 316.608783] xenbr0: port 11(vif10.0) entered disabled state
[ 317.344330] xenbr0: port 6(vif5.0) entered disabled state
[ 317.345286] device vif5.0 left promiscuous mode
[ 317.345578] xenbr0: port 6(vif5.0) entered disabled state
[ 317.441349] xenbr0: port 8(vif7.0) entered disabled state
[ 317.441683] device vif7.0 left promiscuous mode
[ 317.441974] xenbr0: port 8(vif7.0) entered disabled state
[ 317.644587] xenbr0: port 10(vif9.0) entered disabled state
[ 317.644912] device vif9.0 left promiscuous mode
[ 317.645200] xenbr0: port 10(vif9.0) entered disabled state
[ 318.096278] xenbr0: port 11(vif10.0) entered disabled state
[ 318.096596] device vif10.0 left promiscuous mode
[ 318.096917] xenbr0: port 11(vif10.0) entered disabled state
[-- Attachment #3: efi-grub-xen_xl-dmesg_1-core.txt --]
[-- Type: text/plain, Size: 4298 bytes --]
(XEN) Xen version 4.8.3-pre (Debian 4.8.2+xsa245-0+deb9u1) (ijackson@chiark.greenend.org.uk) (gcc (Debian 6.3.0-18) 6.3.0 20170516) debug=n Sat Nov 25 11:30:34 UTC 2017
(XEN) Bootloader: GRUB 2.02~beta3-5
(XEN) Command line: placeholder no-real-mode edd=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Multiboot-e820 RAM map:
(XEN) 0000000000000000 - 0000000000058000 (usable)
(XEN) 0000000000058000 - 0000000000059000 (reserved)
(XEN) 0000000000059000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 000000000009f000 (reserved)
(XEN) 000000000009f000 - 00000000000a0000 (usable)
(XEN) 00000000000a0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000881c6000 (usable)
(XEN) 00000000881c6000 - 00000000881c7000 (ACPI NVS)
(XEN) 00000000881c7000 - 0000000088211000 (reserved)
(XEN) 0000000088211000 - 0000000088283000 (usable)
(XEN) 0000000088283000 - 0000000088303000 type 20
(XEN) 0000000088303000 - 0000000089ec2000 (reserved)
(XEN) 0000000089ec2000 - 0000000089f9a000 (ACPI NVS)
(XEN) 0000000089f9a000 - 0000000089fff000 (ACPI data)
(XEN) 0000000089fff000 - 000000008a000000 (usable)
(XEN) 000000008a000000 - 000000008c000000 (reserved)
(XEN) 0000000090000000 - 0000000096000000 (reserved)
(XEN) 0000000098000000 - 000000009e000000 (reserved)
(XEN) 00000000e00fa000 - 00000000e00fb000 (reserved)
(XEN) 00000000e00fd000 - 00000000e00fe000 (reserved)
(XEN) 00000000fe000000 - 00000000fe011000 (reserved)
(XEN) 0000000100000000 - 0000000862000000 (usable)
(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
(XEN) System RAM: 32417MB (33195868kB)
(XEN) Domain heap initialised
(XEN) Found and enabled local APIC!
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) xstate: size: 0x440 and states: 0x1f
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 1.193MHz PIT
(XEN) Detected 3792.056 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 1 CPUs
(XEN) Dom0 has maximum 208 PIRQs
(XEN) ACPI is disabled, notifying Domain 0 (acpi=off)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f63000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000846000000->0000000848000000 (8161499 pages to be allocated)
(XEN) Init. ramdisk: 0000000860c71000->0000000861fff257
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f63000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008003e5e350
(XEN) Start info: ffffffff81f63000->ffffffff81f634b4
(XEN) Page tables: ffffffff81f64000->ffffffff81f77000
(XEN) Boot stack: ffffffff81f77000->ffffffff81f78000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff81d3d180
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs
(XEN) .............................................................................................................................................................................................................................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 312kB init memory
[-- Attachment #4: efi-xen_dmesg_8-cores.txt --]
[-- Type: text/plain, Size: 56659 bytes --]
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[ 0.000000] Command line: root=/dev/md2 ro rootdelay=10 noquiet nosplash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] Xen: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000881c5fff] usable
[ 0.000000] Xen: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000881c7000-0x0000000088210fff] reserved
[ 0.000000] Xen: [mem 0x0000000088211000-0x0000000088282fff] usable
[ 0.000000] Xen: [mem 0x0000000088283000-0x0000000089ec1fff] reserved
[ 0.000000] Xen: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS
[ 0.000000] Xen: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data
[ 0.000000] Xen: [mem 0x0000000089fff000-0x0000000089ffffff] usable
[ 0.000000] Xen: [mem 0x000000008a000000-0x000000008bffffff] reserved
[ 0.000000] Xen: [mem 0x0000000090000000-0x0000000095ffffff] reserved
[ 0.000000] Xen: [mem 0x0000000098000000-0x000000009dffffff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved
[ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x0000000861ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by EDK II BIOS ID:S1200SP.86B.03.01.0026.092720170729
[ 0.000000] efi: SMBIOS=0x88633000 ACPI=0x89ffe000 ACPI 2.0=0x89ffe014 PROP=0x86bb5af0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0026.092720170729 09/27/2017
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01f37000, 0x01f37fff] PGTABLE
[ 0.000000] BRK [0x01f38000, 0x01f38fff] PGTABLE
[ 0.000000] BRK [0x01f39000, 0x01f39fff] PGTABLE
[ 0.000000] BRK [0x01f3a000, 0x01f3afff] PGTABLE
[ 0.000000] BRK [0x01f3b000, 0x01f3bfff] PGTABLE
[ 0.000000] BRK [0x01f3c000, 0x01f3cfff] PGTABLE
[ 0.000000] BRK [0x01f3d000, 0x01f3dfff] PGTABLE
[ 0.000000] BRK [0x01f3e000, 0x01f3efff] PGTABLE
[ 0.000000] BRK [0x01f3f000, 0x01f3ffff] PGTABLE
[ 0.000000] BRK [0x01f40000, 0x01f40fff] PGTABLE
[ 0.000000] BRK [0x01f41000, 0x01f41fff] PGTABLE
[ 0.000000] BRK [0x01f42000, 0x01f42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x02000000-0x03376fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000089FFE014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x0000000089FB7188 0000D4 (v01 INTEL S1200SPL 00000000 INTL 01000013)
[ 0.000000] ACPI: FACP 0x0000000089FF6000 0000F4 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: DSDT 0x0000000089FC6000 029241 (v02 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: FACS 0x0000000089F7E000 000040
[ 0.000000] ACPI: HPET 0x0000000089FF5000 000038 (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: APIC 0x0000000089FF4000 0000BC (v03 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: MCFG 0x0000000089FF3000 00003C (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x0000000089FF1000 000042 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x0000000089FF0000 000040 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC3000 002BAE (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC2000 000BE3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC1000 00019A (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC0000 0004A3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: UEFI 0x0000000089F93000 000042 (v01 INTEL S1200SPL 00000002 INTL 01000013)
[ 0.000000] ACPI: SSDT 0x0000000089FBF000 000E73 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBD000 000064 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: RMAD 0x0000000089FBB000 000070 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: HEST 0x0000000089FBA000 0000A8 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x0000000089FB8000 000230 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x0000000089FF7000 005328 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBE000 000B79 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: BERT 0x0000000089FB9000 000030 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: PRAD 0x0000000089FBC000 000102 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: EINJ 0x0000000089FFD000 000130 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SPCR 0x0000000089FF2000 000050 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7c706d000-0x7c7071fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff]
[ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff]
[ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff]
[ 0.000000] On node 0 totalpages: 8298966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8649 pages used for memmap
[ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31
[ 0.000000] Normal zone: 120960 pages used for memmap
[ 0.000000] Normal zone: 7741440 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 491049 page(s)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x89ec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed90fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed91000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.3-pre (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88083ec00000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8169272
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md2 ro rootdelay=10 noquiet nosplash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x83ac00000-0x83ec00000] (64MB) mapped at [ffff88083ac00000-ffff88083ebfffff]
[ 0.000000] Memory: 31864832K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 1331032K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:33024 nr_irqs:2048 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3800.000 MHz processor
[ 762.885775] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.48 BogoMIPS (lpj=15168960)
[ 762.885779] pid_max: default: 32768 minimum: 301
[ 762.885790] ACPI: Core revision 20160831
[ 762.918994] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 762.919178] Security Framework initialized
[ 762.919180] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 762.919185] AppArmor: AppArmor disabled by boot time parameter
[ 762.921858] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 762.926093] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 762.927615] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 762.927657] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 762.927886] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 762.927889] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 762.927892] CPU: Physical Processor ID: 0
[ 762.927893] CPU: Processor Core ID: 0
[ 762.927897] mce: CPU supports 2 MCE banks
[ 762.927908] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 762.927909] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 762.928110] Freeing SMP alternatives memory: 24K
[ 762.954525] ftrace: allocating 25212 entries in 99 pages
[ 762.960568] cpu 0 spinlock event irq 121
[ 762.960572] smpboot: Max logical packages: 1
[ 762.960575] VPMU disabled by hypervisor.
[ 762.960586] Performance Events: Skylake events, PMU not available due to virtualization, using software events only.
[ 762.960947] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 762.960949] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 762.961015] installing Xen timer for CPU 1
[ 762.961216] cpu 1 spinlock event irq 133
[ 762.961279] installing Xen timer for CPU 2
[ 762.961475] cpu 2 spinlock event irq 140
[ 762.961537] installing Xen timer for CPU 3
[ 762.961737] cpu 3 spinlock event irq 147
[ 762.961798] installing Xen timer for CPU 4
[ 762.961942] cpu 4 spinlock event irq 154
[ 762.962002] installing Xen timer for CPU 5
[ 762.962143] cpu 5 spinlock event irq 161
[ 762.962203] installing Xen timer for CPU 6
[ 762.962311] cpu 6 spinlock event irq 168
[ 762.962371] installing Xen timer for CPU 7
[ 762.962472] cpu 7 spinlock event irq 175
[ 762.962479] x86: Booted up 1 node, 8 CPUs
[ 762.963049] devtmpfs: initialized
[ 762.963083] x86/mm: Memory block size: 128MB
[ 762.966304] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes)
[ 762.966307] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes)
[ 762.966357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 762.966373] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 762.966427] pinctrl core: initialized pinctrl subsystem
[ 762.966504] NET: Registered protocol family 16
[ 762.966510] xen:grant_table: Grant tables using version 1 layout
[ 762.966517] Grant table initialized
[ 762.966795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 762.966798] ACPI: bus type PCI registered
[ 762.966800] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 762.966926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 762.966930] PCI: not using MMCONFIG
[ 762.966931] PCI: Using configuration type 1 for base access
[ 762.977314] ACPI: Added _OSI(Module Device)
[ 762.977317] ACPI: Added _OSI(Processor Device)
[ 762.977319] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 762.977321] ACPI: Added _OSI(Processor Aggregator Device)
[ 762.977500] xen: registering gsi 9 triggering 0 polarity 0
[ 762.978750] ACPI: Executed 21 blocks of module-level executable AML code
[ 762.987204] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 762.989647] ACPI: Dynamic OEM Table Load:
[ 762.990492] ACPI: Dynamic OEM Table Load:
[ 762.990610] ACPI: SSDT 0xFFFF88083708F800 000750 (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
[ 762.990772] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 762.992397] ACPI: Dynamic OEM Table Load:
[ 762.992403] ACPI: SSDT 0xFFFF88083713FC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
[ 762.993122] ACPI: Dynamic OEM Table Load:
[ 762.993128] ACPI: SSDT 0xFFFF880836CB9800 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
[ 762.993479] ACPI: Dynamic OEM Table Load:
[ 762.993484] ACPI: SSDT 0xFFFF880837123600 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
[ 762.997740] ACPI: Interpreter enabled
[ 762.997769] ACPI: (supports S0 S5)
[ 762.997771] ACPI: Using IOAPIC for interrupt routing
[ 762.997802] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 763.000261] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 763.017796] HEST: Table parsing has been initialized.
[ 763.017799] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 763.018178] ACPI: Power Resource [PG00] (on)
[ 763.018436] ACPI: Power Resource [PG01] (on)
[ 763.018687] ACPI: Power Resource [PG02] (on)
[ 763.025644] ACPI: Power Resource [WRST] (off)
[ 763.025942] ACPI: Power Resource [WRST] (off)
[ 763.026249] ACPI: Power Resource [WRST] (off)
[ 763.026549] ACPI: Power Resource [WRST] (off)
[ 763.026848] ACPI: Power Resource [WRST] (off)
[ 763.027146] ACPI: Power Resource [WRST] (off)
[ 763.027442] ACPI: Power Resource [WRST] (off)
[ 763.027740] ACPI: Power Resource [WRST] (off)
[ 763.028037] ACPI: Power Resource [WRST] (off)
[ 763.028338] ACPI: Power Resource [WRST] (off)
[ 763.028657] ACPI: Power Resource [WRST] (off)
[ 763.028975] ACPI: Power Resource [WRST] (off)
[ 763.029275] ACPI: Power Resource [WRST] (off)
[ 763.029573] ACPI: Power Resource [WRST] (off)
[ 763.029872] ACPI: Power Resource [WRST] (off)
[ 763.030176] ACPI: Power Resource [WRST] (off)
[ 763.030480] ACPI: Power Resource [WRST] (off)
[ 763.030779] ACPI: Power Resource [WRST] (off)
[ 763.031079] ACPI: Power Resource [WRST] (off)
[ 763.031379] ACPI: Power Resource [WRST] (off)
[ 763.033439] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 763.036409] ACPI: Power Resource [FN00] (off)
[ 763.036478] ACPI: Power Resource [FN01] (off)
[ 763.036543] ACPI: Power Resource [FN02] (off)
[ 763.036610] ACPI: Power Resource [FN03] (off)
[ 763.036676] ACPI: Power Resource [FN04] (off)
[ 763.037556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 763.037562] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 763.040447] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 763.040450] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 763.042290] PCI host bridge to bus 0000:00
[ 763.042293] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 763.042295] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 763.042297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 763.042300] pci_bus 0000:00: root bus resource [mem 0x9e000000-0xdfffffff window]
[ 763.042302] pci_bus 0000:00: root bus resource [mem 0x880000000-0x8bfffffff window]
[ 763.042305] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 763.042308] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 763.042318] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000
[ 763.043251] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 763.043277] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit]
[ 763.043371] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 763.044062] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 763.044108] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 763.044133] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit]
[ 763.044903] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 763.044943] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit]
[ 763.045084] pci 0000:00:16.0: PME# supported from D3hot
[ 763.045776] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
[ 763.045820] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit]
[ 763.045991] pci 0000:00:16.1: PME# supported from D3hot
[ 763.046679] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 763.046699] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff]
[ 763.046709] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff]
[ 763.046720] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047]
[ 763.046730] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b]
[ 763.046740] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
[ 763.046750] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff]
[ 763.046808] pci 0000:00:17.0: PME# supported from D3hot
[ 763.047504] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
[ 763.047593] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 763.047609] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 763.048269] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 763.048312] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 763.048401] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 763.048416] pci 0000:00:1d.2: Intel SPT PCH root port ACS workaround enabled
[ 763.049078] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 763.049118] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 763.049207] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 763.049221] pci 0000:00:1d.3: Intel SPT PCH root port ACS workaround enabled
[ 763.049883] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 763.049937] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 763.050752] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 763.050765] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff]
[ 763.051498] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 763.051538] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit]
[ 763.051587] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f]
[ 763.052385] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
[ 763.052412] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref]
[ 763.052428] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff]
[ 763.052444] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff]
[ 763.052507] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 763.052656] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 763.062128] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 763.062136] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 763.062141] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 763.062229] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 763.062256] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff]
[ 763.062289] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
[ 763.062306] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff]
[ 763.062491] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 763.062603] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 763.074280] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 763.074287] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 763.074290] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 763.074402] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 763.074430] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff]
[ 763.074463] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 763.074479] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff]
[ 763.074672] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 763.074804] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 763.075189] random: fast init done
[ 763.086354] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 763.086361] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 763.086364] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 763.086717] xen: registering gsi 13 triggering 1 polarity 0
[ 763.087910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.087962] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 763.088013] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088166] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088268] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.089097] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 763.089247] xen:balloon: Initialising balloon driver
[ 763.092807] xen_balloon: Initialising balloon driver
[ 763.092920] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 763.092924] vgaarb: loaded
[ 763.092926] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 763.092927] vgaarb: bridge control possible 0000:01:00.0
[ 763.092961] Registered efivars operations
[ 763.108835] PCI: Using ACPI for IRQ routing
[ 763.136858] PCI: pci_cache_line_size set to 64 bytes
[ 763.136953] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 763.136954] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 763.136954] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff]
[ 763.136955] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff]
[ 763.136955] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
[ 763.136956] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff]
[ 763.137106] clocksource: Switched to clocksource xen
[ 763.141102] VFS: Disk quotas dquot_6.6.0
[ 763.141131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 763.141144] hugetlbfs: disabling because there are no supported hugepage sizes
[ 763.141165] pnp: PnP ACPI init
[ 763.141261] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 763.141263] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 763.141266] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 763.141268] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 763.141270] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 763.141272] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 763.141274] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 763.141277] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141536] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 763.141539] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141639] system 00:02: [io 0x0680-0x069f] has been reserved
[ 763.141641] system 00:02: [io 0xffff] has been reserved
[ 763.141643] system 00:02: [io 0xffff] has been reserved
[ 763.141645] system 00:02: [io 0xffff] has been reserved
[ 763.141647] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 763.141649] system 00:02: [io 0x164e-0x164f] has been reserved
[ 763.141651] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141712] system 00:03: [io 0x0800-0x087f] has been reserved
[ 763.141714] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141718] xen: registering gsi 8 triggering 1 polarity 0
[ 763.141757] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 763.141780] system 00:05: [io 0x1854-0x1857] has been reserved
[ 763.141783] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 763.142085] xen: registering gsi 4 triggering 1 polarity 0
[ 763.142146] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 763.143123] xen: registering gsi 14 triggering 0 polarity 1
[ 763.143169] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 763.143172] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 763.143174] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 763.143176] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.143614] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 763.143616] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 763.143618] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 763.143620] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 763.143622] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 763.143624] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 763.143626] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 763.143628] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 763.143631] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 763.143633] system 00:08: [mem 0x9e000000-0x9e01ffff] has been reserved
[ 763.143636] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.144376] pnp: PnP ACPI: found 9 devices
[ 763.149042] PM-Timer failed consistency check (0xffffff) - aborting.
[ 763.149045] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 763.149075] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref]
[ 763.149078] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 763.149084] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 763.149089] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 763.149096] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 763.149099] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 763.149110] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 763.149119] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 763.149122] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 763.149127] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 763.149137] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 763.149138] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 763.149138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 763.149139] pci_bus 0000:00: resource 7 [mem 0x9e000000-0xdfffffff window]
[ 763.149139] pci_bus 0000:00: resource 8 [mem 0x880000000-0x8bfffffff window]
[ 763.149140] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[ 763.149141] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff]
[ 763.149141] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref]
[ 763.149142] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 763.149143] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff]
[ 763.149143] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 763.149144] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff]
[ 763.149311] NET: Registered protocol family 2
[ 763.149577] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 763.149823] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 763.149896] TCP: Hash tables configured (established 262144 bind 65536)
[ 763.149943] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 763.150024] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 763.150096] NET: Registered protocol family 1
[ 763.150167] xen: registering gsi 16 triggering 0 polarity 1
[ 763.150179] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 763.150640] PCI: CLS 128 bytes, default 64
[ 763.150665] Unpacking initramfs...
[ 763.364442] Freeing initrd memory: 19932K
[ 763.364851] audit: initializing netlink subsys (disabled)
[ 763.364864] audit: type=2000 audit(1516697766.295:1): initialized
[ 763.365276] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 763.365613] zbud: loaded
[ 763.366224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 763.366258] io scheduler noop registered
[ 763.366260] io scheduler deadline registered
[ 763.366273] io scheduler cfq registered (default)
[ 763.366393] xen: registering gsi 17 triggering 0 polarity 1
[ 763.366406] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 763.366597] xen: registering gsi 18 triggering 0 polarity 1
[ 763.366604] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 763.366777] xen: registering gsi 19 triggering 0 polarity 1
[ 763.366783] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 763.366930] aer 0000:00:1d.0:pcie002: service driver aer loaded
[ 763.366951] aer 0000:00:1d.2:pcie002: service driver aer loaded
[ 763.366972] aer 0000:00:1d.3:pcie002: service driver aer loaded
[ 763.366982] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[ 763.366985] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 763.366989] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[ 763.366996] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[ 763.366998] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 763.367003] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[ 763.367010] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[ 763.367012] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 763.367016] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[ 763.367021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 763.367024] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 763.367033] efifb: probing for efifb
[ 763.367170] efifb: framebuffer at 0x9f000000, using 1876k, total 1875k
[ 763.367172] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 763.367174] efifb: scrolling: redraw
[ 763.367176] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 763.381045] Console: switching to colour frame buffer device 100x37
[ 763.394357] fb0: EFI VGA frame buffer device
[ 763.394534] intel_idle: MWAIT substates: 0x142120
[ 763.394535] intel_idle: v0.4.1 model 0x9E
[ 763.394537] intel_idle: intel_idle yielding to none
[ 763.394736] Monitor-Mwait will be used to enter C-1 state
[ 763.394738] Monitor-Mwait will be used to enter C-2 state
[ 763.395993] Warning: Processor Platform Limit not supported.
[ 763.396067] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 763.396351] pstore: using zlib compression
[ 763.396517] pstore: Registered erst as persistent store backend
[ 763.397010] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 763.397570] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 763.418840] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 763.419406] hpet_acpi_add: no address or irqs in _CRS
[ 763.419611] Linux agpgart interface v0.103
[ 763.419801] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 763.420028] AMD IOMMUv2 functionality not available on this system
[ 763.420775] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 764.389152] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d536927526, max_idle_ns: 881590452663 ns
[ 764.522218] i8042: No controller found
[ 764.529963] mousedev: PS/2 mouse device common for all mice
[ 764.537633] rtc_cmos 00:04: RTC can wake from S4
[ 764.545613] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 764.553296] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[ 764.560776] intel_pstate: Intel P-state driver initializing
[ 764.568495] ledtrig-cpu: registered to indicate activity on CPUs
[ 764.576699] NET: Registered protocol family 10
[ 764.584639] mip6: Mobile IPv6
[ 764.592166] NET: Registered protocol family 17
[ 764.599725] mpls_gso: MPLS GSO support
[ 764.607294] mce: Unable to init device /dev/mcelog (rc: -16)
[ 764.614949] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 764.622647] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 764.630541] registered taskstats version 1
[ 764.638128] zswap: loaded using pool lzo/zbud
[ 764.645942] ima: No TPM chip found, activating TPM-bypass!
[ 764.654341] rtc_cmos 00:04: setting system clock to 2018-01-23 08:56:08 UTC (1516697768)
[ 764.662104] PM: Hibernation image not present or could not be loaded.
[ 764.662431] Freeing unused kernel memory: 1408K
[ 764.670144] Write protecting the kernel read-only data: 12288k
[ 764.680069] Freeing unused kernel memory: 1980K
[ 764.688168] Freeing unused kernel memory: 1248K
[ 764.716113] x86/mm: Checked W+X mappings: FAILED, 4090 W+X pages found.
[ 764.787305] hidraw: raw HID events driver (C) Jiri Kosina
[ 764.802194] thermal LNXTHERM:00: registered as thermal_zone0
[ 764.809725] ACPI: Thermal Zone [TZ00] (28 C)
[ 764.817399] ACPI: bus type USB registered
[ 764.817462] pps_core: LinuxPPS API ver. 1 registered
[ 764.817462] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 764.834232] thermal LNXTHERM:01: registered as thermal_zone1
[ 764.834267] ACPI: Thermal Zone [TZ01] (30 C)
[ 764.861735] usbcore: registered new interface driver usbfs
[ 764.869045] usbcore: registered new interface driver hub
[ 764.876059] usbcore: registered new device driver usb
[ 764.883106] PTP clock support registered
[ 764.890310] dca service started, version 1.12.1
[ 764.890556] SCSI subsystem initialized
[ 764.904659] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 764.912332] xen: registering gsi 16 triggering 0 polarity 1
[ 764.912336] Already setup the GSI :16
[ 764.919372] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 764.919619] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 764.922383] libata version 3.00 loaded.
[ 764.926705] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 764.940394] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 764.948005] xen: registering gsi 18 triggering 0 polarity 1
[ 764.948008] Already setup the GSI :18
[ 764.956483] AVX2 version of gcm_enc/dec engaged.
[ 764.963562] AES CTR mode by8 optimization enabled
[ 764.969475] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
[ 764.979781] xen: registering gsi 16 triggering 0 polarity 1
[ 764.979785] Already setup the GSI :16
[ 764.986657] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 764.993563] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 765.001660] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 765.008643] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 765.008752] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 765.015680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 765.022613] usb usb1: Product: xHCI Host Controller
[ 765.029471] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 765.036484] usb usb1: SerialNumber: 0000:00:14.0
[ 765.043532] hub 1-0:1.0: USB hub found
[ 765.050353] hub 1-0:1.0: 16 ports detected
[ 765.057268] pps pps0: new PPS source ptp0
[ 765.063984] igb 0000:02:00.0: added PHC on eth0
[ 765.068621] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 765.068641] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 765.069827] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 765.069828] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 765.069829] usb usb2: Product: xHCI Host Controller
[ 765.069830] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 765.069830] usb usb2: SerialNumber: 0000:00:14.0
[ 765.071455] hub 2-0:1.0: USB hub found
[ 765.072090] hub 2-0:1.0: 10 ports detected
[ 765.130366] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 765.137066] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00
[ 765.143859] igb 0000:02:00.0: eth0: PBA No: 006200-000
[ 765.150511] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 765.157471] xen: registering gsi 19 triggering 0 polarity 1
[ 765.157475] Already setup the GSI :19
[ 765.157545] ahci 0000:00:17.0: version 3.0
[ 765.158345] xen: registering gsi 16 triggering 0 polarity 1
[ 765.158644] Already setup the GSI :16
[ 765.170859] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 765.177610] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 765.189807] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
[ 765.215067] pps pps1: new PPS source ptp1
[ 765.221979] igb 0000:03:00.0: added PHC on eth1
[ 765.228935] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 765.235990] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01
[ 765.243062] igb 0000:03:00.0: eth1: PBA No: 006200-000
[ 765.249935] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 765.257647] igb 0000:03:00.0 eno2: renamed from eth1
[ 765.264962] scsi host0: ahci
[ 765.271923] scsi host1: ahci
[ 765.278555] scsi host2: ahci
[ 765.285029] scsi host3: ahci
[ 765.286928] igb 0000:02:00.0 eno1: renamed from eth0
[ 765.309116] scsi host4: ahci
[ 765.325468] scsi host5: ahci
[ 765.331611] scsi host6: ahci
[ 765.337737] scsi host7: ahci
[ 765.341135] random: crng init done
[ 765.349533] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 189
[ 765.355673] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 189
[ 765.361706] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 189
[ 765.367516] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 189
[ 765.373217] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 189
[ 765.378817] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 189
[ 765.384234] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 189
[ 765.389528] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 189
[ 765.397145] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 765.413396] clocksource: Switched to clocksource tsc
[ 765.562744] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10
[ 765.568073] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 765.573456] usb 1-1: Product: Virtual Keyboard and Mouse
[ 765.578785] usb 1-1: Manufacturer: American Megatrends Inc.
[ 765.584021] usb 1-1: SerialNumber: serial
[ 765.591944] usbcore: registered new interface driver usbhid
[ 765.597165] usbhid: USB HID core driver
[ 765.602826] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
[ 765.613426] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
[ 765.624431] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
[ 765.636179] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
[ 765.705686] ata4: SATA link down (SStatus 0 SControl 300)
[ 765.711805] ata5: SATA link down (SStatus 0 SControl 300)
[ 765.717800] ata3: SATA link down (SStatus 0 SControl 300)
[ 765.723793] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 765.729935] ata6: SATA link down (SStatus 0 SControl 300)
[ 765.736191] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 765.742510] ata7: SATA link down (SStatus 0 SControl 300)
[ 765.748778] ata8: SATA link down (SStatus 0 SControl 300)
[ 765.758028] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 765.764459] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 765.774025] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 765.780933] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 765.789398] ata2.00: configured for UDMA/133
[ 765.799648] ata1.00: configured for UDMA/133
[ 765.806620] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 765.845669] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 765.887154] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 765.887161] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 765.887815] sd 1:0:0:0: [sdb] Write Protect is off
[ 765.887863] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 765.888184] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 765.924339] sd 0:0:0:0: [sda] Write Protect is off
[ 765.931731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 765.931737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 765.946722] sdb: sdb1 sdb2 sdb3 sdb4
[ 765.952495] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 766.008112] sda: sda1 sda2 sda3 sda4
[ 766.016031] sd 0:0:0:0: [sda] Attached SCSI disk
[ 766.210907] md: bind<sda2>
[ 766.311448] md: bind<sdb2>
[ 766.328967] md: bind<sdb4>
[ 766.336120] md: raid1 personality registered for level 1
[ 766.342745] md: bind<sda4>
[ 766.349417] md/raid1:md2: active with 2 out of 2 mirrors
[ 766.355689] md2: detected capacity change from 0 to 20970405888
[ 766.361954] md/raid1:md4: active with 2 out of 2 mirrors
[ 766.368135] created bitmap (29 pages) for device md4
[ 766.374665] md4: bitmap initialized from disk: read 2 pages, set 0 of 59234 bits
[ 766.415111] md4: detected capacity change from 0 to 3975079198720
[ 766.624772] device-mapper: uevent: version 1.0.3
[ 766.631300] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 768.394485] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 768.408438] e100: Copyright(c) 1999-2006 Intel Corporation
[ 768.417272] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 768.426183] sis900.c: v1.08.10 Apr. 2 2006
[ 768.434980] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 768.444015] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 768.452585] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 768.462425] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 768.469600] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 768.484133] sky2: driver version 1.30
[ 768.493176] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 768.509610] megasas: 06.811.02.00-rc1
[ 768.534223] md: raid0 personality registered for level 0
[ 768.609143] raid6: sse2x1 gen() 13457 MB/s
[ 768.681139] raid6: sse2x1 xor() 9313 MB/s
[ 768.753146] raid6: sse2x2 gen() 16509 MB/s
[ 768.825142] raid6: sse2x2 xor() 11603 MB/s
[ 768.897142] raid6: sse2x4 gen() 18277 MB/s
[ 768.969143] raid6: sse2x4 xor() 13299 MB/s
[ 769.041144] raid6: avx2x1 gen() 26605 MB/s
[ 769.113143] raid6: avx2x2 gen() 30556 MB/s
[ 769.185143] raid6: avx2x4 gen() 33636 MB/s
[ 769.191257] raid6: using algorithm avx2x4 gen() 33636 MB/s
[ 769.197425] raid6: using avx2x2 recovery algorithm
[ 769.204024] xor: automatically using best checksumming function avx
[ 769.210754] async_tx: api initialized (async)
[ 769.218492] md: raid6 personality registered for level 6
[ 769.224969] md: raid5 personality registered for level 5
[ 769.231334] md: raid4 personality registered for level 4
[ 769.241306] Fusion MPT base driver 3.04.20
[ 769.247438] Copyright (c) 1999-2008 LSI Corporation
[ 769.254350] Fusion MPT SPI Host driver 3.04.20
[ 769.262895] Fusion MPT SAS Host driver 3.04.20
[ 769.270567] Fusion MPT misc device (ioctl) driver 3.04.20
[ 769.276437] mptctl: Registered with Fusion MPT base driver
[ 769.282229] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 769.297543] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 769.303200] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 769.312665] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 769.320220] QLogic/NetXen Network Driver v4.0.82
[ 769.329587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 769.337067] uhci_hcd: USB Universal Host Controller Interface driver
[ 769.344602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 769.353288] md: linear personality registered for level -1
[ 769.360741] md: multipath personality registered for level -4
[ 769.375101] md: raid10 personality registered for level 10
[ 779.407715] Btrfs loaded, crc32c=crc32c-intel
[ 783.445176] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 784.095098] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 784.187574] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 784.209891] systemd[1]: Detected virtualization xen.
[ 784.217678] systemd[1]: Detected architecture x86-64.
[ 784.272577] systemd[1]: Set hostname to <y00>.
[ 784.597118] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked.
[ 784.613483] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 784.629970] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 784.646668] systemd[1]: Reached target Remote File Systems.
[ 784.663397] systemd[1]: Created slice User and Session Slice.
[ 784.680243] systemd[1]: Created slice System Slice.
[ 784.913924] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
[ 785.076194] systemd-journald[662]: Received request to flush runtime journal from PID 1
[ 785.523899] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 785.530673] ACPI: Sleep Button [SLPB]
[ 785.537321] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 785.544145] ACPI: Power Button [PWRF]
[ 785.670375] igb 0000:02:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 785.682287] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 785.692098] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 785.702016] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 785.787021] Bluetooth: Core ver 2.22
[ 785.794435] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 785.802078] NET: Registered protocol family 31
[ 785.809485] Bluetooth: HCI device and connection manager initialized
[ 785.816941] Bluetooth: HCI socket layer initialized
[ 785.816946] mei_me 0000:00:16.1: Device doesn't have valid ME Interface
[ 785.818187] acpi INT33D6:00: intel-vbtn: created platform device
[ 785.822949] input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input4
[ 785.846473] Bluetooth: L2CAP socket layer initialized
[ 785.854244] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[ 785.856465] Bluetooth: SCO socket layer initialized
[ 785.869838] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[ 785.878037] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[ 785.906199] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 785.914712] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 785.938259] EFI Variables Facility v0.08 2004-May-17
[ 785.964512] Bluetooth: HCI UART driver ver 2.3
[ 785.972393] Bluetooth: HCI UART protocol H4 registered
[ 785.980182] Bluetooth: HCI UART protocol BCSP registered
[ 785.988841] Bluetooth: HCI UART protocol LL registered
[ 785.996418] Bluetooth: HCI UART protocol ATH3K registered
[ 786.003850] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 786.011410] Bluetooth: HCI UART protocol Intel registered
[ 786.018820] Bluetooth: HCI UART protocol Broadcom registered
[ 786.026132] Bluetooth: HCI UART protocol QCA registered
[ 786.033424] Bluetooth: HCI UART protocol AG6XX registered
[ 786.040682] Bluetooth: HCI UART protocol Marvell registered
[ 786.047780] iTCO_vendor_support: vendor-support=0
[ 786.057244] [drm] Initialized
[ 786.073970] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 786.081932] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 786.088860] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 786.105863] checking generic (9f000000 1d5000) vs hw (9f000000 1000000)
[ 786.105864] fb: switching to mgag200drmfb from EFI VGA
[ 786.112578] Console: switching to colour dummy device 80x25
[ 786.112998] xen: registering gsi 17 triggering 0 polarity 1
[ 786.113002] Already setup the GSI :17
[ 786.124500] [TTM] Zone kernel: Available graphics memory: 15944712 kiB
[ 786.124504] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 786.124506] [TTM] Initializing pool allocator
[ 786.124510] [TTM] Initializing DMA pool allocator
[ 786.166827] fbcon: mgadrmfb (fb0) is primary device
[ 786.166871] Console: switching to colour frame buffer device 128x48
[ 786.439196] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device
[ 786.453161] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0
[ 786.562605] intel_rapl: Found RAPL domain package
[ 786.562606] intel_rapl: Found RAPL domain core
[ 786.562607] intel_rapl: Found RAPL domain dram
[ 786.657204] power_meter ACPI000D:00: Found ACPI power meter.
[ 786.657348] wmi: Mapper loaded
[ 786.682070] power_meter ACPI000D:00: Found ACPI power meter.
[ 786.682105] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 786.722732] Adding 4094972k swap on /dev/sdb3. Priority:-1 extents:1 across:4094972k FS
[ 787.814702] ppdev: user-space parallel port driver
[ 788.514095] Adding 4094972k swap on /dev/sda3. Priority:-2 extents:1 across:4094972k FS
[ 789.269231] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 789.272533] xen:xen_evtchn: Event-channel device installed
[ 789.275603] xenbr0: port 1(eno2) entered blocking state
[ 789.276005] xenbr0: port 1(eno2) entered disabled state
[ 789.276425] device eno2 entered promiscuous mode
[ 789.318506] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 789.321176] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 790.277175] xenbr0: port 1(eno2) entered blocking state
[ 790.277517] xenbr0: port 1(eno2) entered forwarding state
[ 790.278002] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[-- Attachment #5: efi-xen_xl-dmesg_8-cores.txt --]
[-- Type: text/plain, Size: 6621 bytes --]
(XEN) Xen version 4.8.3-pre (Debian 4.8.2+xsa245-0+deb9u1) (ijackson@chiark.greenend.org.uk) (gcc (Debian 6.3.0-18) 6.3.0 20170516) debug=n Sat Nov 25 11:30:34 UTC 2017
(XEN) Bootloader: EFI
(XEN) Command line:
(XEN) Video information:
(XEN) VGA is graphics mode 800x600, 32 bpp
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) EFI RAM map:
(XEN) 0000000000000000 - 0000000000058000 (usable)
(XEN) 0000000000058000 - 0000000000059000 (reserved)
(XEN) 0000000000059000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 000000000009f000 (reserved)
(XEN) 000000000009f000 - 00000000000a0000 (usable)
(XEN) 00000000000a0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000881c6000 (usable)
(XEN) 00000000881c6000 - 00000000881c7000 (ACPI NVS)
(XEN) 00000000881c7000 - 0000000088211000 (reserved)
(XEN) 0000000088211000 - 0000000088283000 (usable)
(XEN) 0000000088283000 - 0000000089ec2000 (reserved)
(XEN) 0000000089ec2000 - 0000000089f9a000 (ACPI NVS)
(XEN) 0000000089f9a000 - 0000000089fff000 (ACPI data)
(XEN) 0000000089fff000 - 000000008a000000 (usable)
(XEN) 000000008a000000 - 000000008c000000 (reserved)
(XEN) 0000000090000000 - 0000000096000000 (reserved)
(XEN) 0000000098000000 - 000000009e000000 (reserved)
(XEN) 00000000e00fa000 - 00000000e00fb000 (reserved)
(XEN) 00000000e00fd000 - 00000000e00fe000 (reserved)
(XEN) 00000000fe000000 - 00000000fe011000 (reserved)
(XEN) 0000000100000000 - 0000000862000000 (usable)
(XEN) ACPI: RSDP 89FFE014, 0024 (r2 INTEL )
(XEN) ACPI: XSDT 89FB7188, 00D4 (r1 INTEL S1200SPL 0 INTL 1000013)
(XEN) ACPI: FACP 89FF6000, 00F4 (r5 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: DSDT 89FC6000, 29241 (r2 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: FACS 89F7E000, 0040
(XEN) ACPI: HPET 89FF5000, 0038 (r1 INTEL S1200SPL 1 INTL 20091013)
(XEN) ACPI: APIC 89FF4000, 00BC (r3 INTEL S1200SPL 1 INTL 20091013)
(XEN) ACPI: MCFG 89FF3000, 003C (r1 INTEL S1200SPL 1 INTL 20091013)
(XEN) ACPI: SPMI 89FF1000, 0042 (r5 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: WDDT 89FF0000, 0040 (r1 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: SSDT 89FC3000, 2BAE (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: SSDT 89FC2000, 0BE3 (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: SSDT 89FC1000, 019A (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: SSDT 89FC0000, 04A3 (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: UEFI 89F93000, 0042 (r1 INTEL S1200SPL 2 INTL 1000013)
(XEN) ACPI: SSDT 89FBF000, 0E73 (r2 INTEL S1200SPL 3000 INTL 20141107)
(XEN) ACPI: SSDT 89FBD000, 0064 (r2 INTEL S1200SPL 2 INTL 20141107)
(XEN) ACPI: DMAR 89FBB000, 0070 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: HEST 89FBA000, 00A8 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: ERST 89FB8000, 0230 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: SSDT 89FF7000, 5328 (r2 INTEL S1200SPL 3000 INTL 20141107)
(XEN) ACPI: SSDT 89FBE000, 0B79 (r2 INTEL S1200SPL 2 INTL 20141107)
(XEN) ACPI: BERT 89FB9000, 0030 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: PRAD 89FBC000, 0102 (r2 INTEL S1200SPL 2 INTL 20141107)
(XEN) ACPI: EINJ 89FFD000, 0130 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: SPCR 89FF2000, 0050 (r1 INTEL S1200SPL 0 INTL 20091013)
(XEN) System RAM: 32417MB (33195868kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 89f7e000/0000000000000000, using 32
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) [VT-D] RMRR address range 3e2e0000..3e2fffff not in reserved memory; need "iommu_inclusive_mapping=1"?
(XEN) Not enabling x2APIC (upon firmware request)
(XEN) xstate: size: 0x440 and states: 0x1f
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 23.999MHz HPET
(XEN) Detected 3792.241 MHz processor.
(XEN) Initing memory sharing.
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Posted Interrupt not enabled.
(XEN) Intel VT-d Shared EPT tables enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer appears to have unexpectedly wrapped 4 times.
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 8 CPUs
(XEN) Dom0 has maximum 888 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f63000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000846000000->0000000848000000 (8142075 pages to be allocated)
(XEN) Init. ramdisk: 0000000860c89000->0000000861fff458
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f63000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008003e38390
(XEN) Start info: ffffffff81f63000->ffffffff81f634b4
(XEN) Page tables: ffffffff81f64000->ffffffff81f77000
(XEN) Boot stack: ffffffff81f77000->ffffffff81f78000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff81d3d180
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) ....................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 2048kB init memory
[-- Attachment #6: efi-debian_dmesg_8-cores.txt --]
[-- Type: text/plain, Size: 55889 bytes --]
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000881c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000881c7000-0x0000000088210fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000088211000-0x0000000088282fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088283000-0x0000000088302fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000088303000-0x0000000089ec1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000089fff000-0x0000000089ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a000000-0x000000008bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000090000000-0x0000000095ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000098000000-0x000000009dffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000861ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by EDK II BIOS ID:S1200SP.86B.03.01.0026.092720170729
[ 0.000000] efi: SMBIOS=0x88633000 ACPI=0x89ffe000 ACPI 2.0=0x89ffe014 PROP=0x86bb5af0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0026.092720170729 09/27/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0880000000 mask 7FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff94b8c0094000] 94000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x682d37000, 0x682d37fff] PGTABLE
[ 0.000000] BRK [0x682d38000, 0x682d38fff] PGTABLE
[ 0.000000] BRK [0x682d39000, 0x682d39fff] PGTABLE
[ 0.000000] BRK [0x682d3a000, 0x682d3afff] PGTABLE
[ 0.000000] BRK [0x682d3b000, 0x682d3bfff] PGTABLE
[ 0.000000] BRK [0x682d3c000, 0x682d3cfff] PGTABLE
[ 0.000000] BRK [0x682d3d000, 0x682d3dfff] PGTABLE
[ 0.000000] BRK [0x682d3e000, 0x682d3efff] PGTABLE
[ 0.000000] BRK [0x682d3f000, 0x682d3ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x358d1000-0x36c5ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000089FFE014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x0000000089FB7188 0000D4 (v01 INTEL S1200SPL 00000000 INTL 01000013)
[ 0.000000] ACPI: FACP 0x0000000089FF6000 0000F4 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: DSDT 0x0000000089FC6000 029241 (v02 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: FACS 0x0000000089F7E000 000040
[ 0.000000] ACPI: HPET 0x0000000089FF5000 000038 (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: APIC 0x0000000089FF4000 0000BC (v03 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: MCFG 0x0000000089FF3000 00003C (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x0000000089FF1000 000042 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x0000000089FF0000 000040 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC3000 002BAE (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC2000 000BE3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC1000 00019A (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC0000 0004A3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: UEFI 0x0000000089F93000 000042 (v01 INTEL S1200SPL 00000002 INTL 01000013)
[ 0.000000] ACPI: SSDT 0x0000000089FBF000 000E73 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBD000 000064 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: DMAR 0x0000000089FBB000 000070 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: HEST 0x0000000089FBA000 0000A8 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x0000000089FB8000 000230 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x0000000089FF7000 005328 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBE000 000B79 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: BERT 0x0000000089FB9000 000030 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: PRAD 0x0000000089FBC000 000102 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: EINJ 0x0000000089FFD000 000130 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SPCR 0x0000000089FF2000 000050 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x861ffb000-0x861ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff]
[ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff]
[ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff]
[ 0.000000] On node 0 totalpages: 8298966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1089 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8649 pages used for memmap
[ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31
[ 0.000000] Normal zone: 120960 pages used for memmap
[ 0.000000] Normal zone: 7741440 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x88302fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88303000-0x89ec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff94c121c00000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8168204
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32493876K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 701988K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:2048 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 3800.000 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.00 BogoMIPS (lpj=15168000)
[ 0.000020] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20160831
[ 0.023259] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.023659] Security Framework initialized
[ 0.023661] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.023666] AppArmor: AppArmor disabled by boot time parameter
[ 0.024617] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.028007] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.029506] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.029523] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.029723] CPU: Physical Processor ID: 0
[ 0.029725] CPU: Processor Core ID: 0
[ 0.029729] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.029731] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.029735] mce: CPU supports 10 MCE banks
[ 0.029743] CPU0: Thermal monitoring enabled (TM1)
[ 0.029757] process: using mwait in idle threads
[ 0.029760] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.029762] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.030012] Freeing SMP alternatives memory: 24K
[ 0.054985] ftrace: allocating 25212 entries in 99 pages
[ 0.061460] smpboot: Max logical packages: 2
[ 0.061467] DMAR: Host address width 39
[ 0.061469] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.061474] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.061476] DMAR: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
[ 0.061479] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.061481] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.061482] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.061484] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.062746] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.062748] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.066771] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.106461] TSC deadline timer enabled
[ 0.106466] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.106471] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.106493] ... version: 4
[ 0.106495] ... bit width: 48
[ 0.106496] ... generic registers: 4
[ 0.106498] ... value mask: 0000ffffffffffff
[ 0.106499] ... max period: 00007fffffffffff
[ 0.106501] ... fixed-purpose events: 3
[ 0.106502] ... event mask: 000000070000000f
[ 0.106874] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.106931] x86: Booting SMP configuration:
[ 0.106933] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.124437] x86: Booted up 1 node, 8 CPUs
[ 0.124442] smpboot: Total of 8 processors activated (60672.00 BogoMIPS)
[ 0.130546] devtmpfs: initialized
[ 0.130585] x86/mm: Memory block size: 128MB
[ 0.133720] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes)
[ 0.133723] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes)
[ 0.133767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.133777] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.133813] pinctrl core: initialized pinctrl subsystem
[ 0.134579] NET: Registered protocol family 16
[ 0.150100] cpuidle: using governor ladder
[ 0.166111] cpuidle: using governor menu
[ 0.166161] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.166164] ACPI: bus type PCI registered
[ 0.166166] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.166220] PCI: not using MMCONFIG
[ 0.166221] PCI: Using configuration type 1 for base access
[ 0.182210] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.182213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.182353] ACPI: Added _OSI(Module Device)
[ 0.182356] ACPI: Added _OSI(Processor Device)
[ 0.182358] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.182360] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183282] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.189297] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.190907] ACPI: Dynamic OEM Table Load:
[ 0.191433] ACPI: Dynamic OEM Table Load:
[ 0.191459] ACPI: SSDT 0xFFFF94C0FD403800 000750 (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
[ 0.191600] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.192779] ACPI: Dynamic OEM Table Load:
[ 0.192785] ACPI: SSDT 0xFFFF94C0FD400000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
[ 0.193277] ACPI: Dynamic OEM Table Load:
[ 0.193283] ACPI: SSDT 0xFFFF94C0FD403000 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
[ 0.193587] ACPI: Dynamic OEM Table Load:
[ 0.193592] ACPI: SSDT 0xFFFF94C0FD409800 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
[ 0.196838] ACPI: Interpreter enabled
[ 0.196865] ACPI: (supports S0 S5)
[ 0.196867] ACPI: Using IOAPIC for interrupt routing
[ 0.196891] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.198627] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.198654] HEST: Table parsing has been initialized.
[ 0.198657] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199022] ACPI: Power Resource [PG00] (on)
[ 0.199240] ACPI: Power Resource [PG01] (on)
[ 0.199449] ACPI: Power Resource [PG02] (on)
[ 0.205272] ACPI: Power Resource [WRST] (off)
[ 0.205517] ACPI: Power Resource [WRST] (off)
[ 0.205762] ACPI: Power Resource [WRST] (off)
[ 0.206006] ACPI: Power Resource [WRST] (off)
[ 0.206249] ACPI: Power Resource [WRST] (off)
[ 0.206495] ACPI: Power Resource [WRST] (off)
[ 0.206740] ACPI: Power Resource [WRST] (off)
[ 0.206983] ACPI: Power Resource [WRST] (off)
[ 0.207226] ACPI: Power Resource [WRST] (off)
[ 0.207472] ACPI: Power Resource [WRST] (off)
[ 0.207728] ACPI: Power Resource [WRST] (off)
[ 0.207983] ACPI: Power Resource [WRST] (off)
[ 0.208227] ACPI: Power Resource [WRST] (off)
[ 0.208470] ACPI: Power Resource [WRST] (off)
[ 0.208714] ACPI: Power Resource [WRST] (off)
[ 0.208957] ACPI: Power Resource [WRST] (off)
[ 0.209201] ACPI: Power Resource [WRST] (off)
[ 0.209444] ACPI: Power Resource [WRST] (off)
[ 0.209688] ACPI: Power Resource [WRST] (off)
[ 0.209931] ACPI: Power Resource [WRST] (off)
[ 0.211727] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 0.214084] ACPI: Power Resource [FN00] (off)
[ 0.214142] ACPI: Power Resource [FN01] (off)
[ 0.214197] ACPI: Power Resource [FN02] (off)
[ 0.214253] ACPI: Power Resource [FN03] (off)
[ 0.214312] ACPI: Power Resource [FN04] (off)
[ 0.214956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.214961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.216926] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.216928] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.218254] PCI host bridge to bus 0000:00
[ 0.218257] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.218259] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.218261] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.218264] pci_bus 0000:00: root bus resource [mem 0x9e000000-0xdfffffff window]
[ 0.218267] pci_bus 0000:00: root bus resource [mem 0x880000000-0x8bfffffff window]
[ 0.218269] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.218272] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.218278] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000
[ 0.218976] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.218991] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit]
[ 0.219044] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.219569] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.219597] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.219610] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit]
[ 0.220171] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.220200] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit]
[ 0.220306] pci 0000:00:16.0: PME# supported from D3hot
[ 0.220830] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
[ 0.220863] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit]
[ 0.220987] pci 0000:00:16.1: PME# supported from D3hot
[ 0.221504] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.221515] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff]
[ 0.221520] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff]
[ 0.221526] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047]
[ 0.221531] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b]
[ 0.221536] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
[ 0.221542] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff]
[ 0.221572] pci 0000:00:17.0: PME# supported from D3hot
[ 0.222097] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
[ 0.222143] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.222656] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.222682] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 0.222727] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 0.223236] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.223258] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 0.223304] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 0.223811] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.223850] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 0.224447] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.224455] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff]
[ 0.225003] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.225042] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit]
[ 0.225092] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f]
[ 0.225698] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
[ 0.225718] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref]
[ 0.225729] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff]
[ 0.225741] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff]
[ 0.225786] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.225893] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.234339] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.234343] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 0.234346] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 0.234403] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 0.234423] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff]
[ 0.234446] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
[ 0.234457] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff]
[ 0.234571] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.234640] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.246363] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 0.246366] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 0.246368] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 0.246426] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 0.246445] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff]
[ 0.246468] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.246480] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff]
[ 0.246593] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.246663] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.258364] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 0.258367] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 0.258368] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 0.259445] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259481] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.259516] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259550] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259585] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.260282] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.260419] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.260422] vgaarb: loaded
[ 0.260424] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.260426] vgaarb: bridge control possible 0000:01:00.0
[ 0.260448] Registered efivars operations
[ 0.276290] PCI: Using ACPI for IRQ routing
[ 0.304314] PCI: pci_cache_line_size set to 64 bytes
[ 0.304387] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.304387] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.304388] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff]
[ 0.304388] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff]
[ 0.304389] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
[ 0.304390] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff]
[ 0.304512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.304516] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.306557] clocksource: Switched to clocksource hpet
[ 0.310416] VFS: Disk quotas dquot_6.6.0
[ 0.310432] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.310477] pnp: PnP ACPI init
[ 0.310554] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.310574] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.310576] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.310579] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.310581] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.310583] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.310585] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.310587] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310767] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.310770] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310855] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.310858] system 00:02: [io 0xffff] has been reserved
[ 0.310859] system 00:02: [io 0xffff] has been reserved
[ 0.310861] system 00:02: [io 0xffff] has been reserved
[ 0.310863] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.310865] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.310867] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310920] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.310922] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310935] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.310957] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.310959] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.311199] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.311902] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.311904] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.311906] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.311909] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312228] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.312230] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.312232] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.312234] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.312236] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.312238] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.312240] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.312242] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.312244] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.312246] system 00:08: [mem 0x9e000000-0x9e01ffff] has been reserved
[ 0.312248] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312802] pnp: PnP ACPI: found 9 devices
[ 0.319229] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.319233] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.319250] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref]
[ 0.319253] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.319256] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 0.319259] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 0.319264] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 0.319267] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 0.319270] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 0.319275] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 0.319278] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 0.319281] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 0.319287] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.319287] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.319288] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.319289] pci_bus 0000:00: resource 7 [mem 0x9e000000-0xdfffffff window]
[ 0.319289] pci_bus 0000:00: resource 8 [mem 0x880000000-0x8bfffffff window]
[ 0.319290] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[ 0.319290] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff]
[ 0.319291] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref]
[ 0.319291] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.319292] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff]
[ 0.319293] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.319293] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff]
[ 0.319421] NET: Registered protocol family 2
[ 0.319557] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.319750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.319818] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.319837] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.319885] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.319952] NET: Registered protocol family 1
[ 0.320421] PCI: CLS 128 bytes, default 64
[ 0.320444] Unpacking initramfs...
[ 0.533661] Freeing initrd memory: 20028K
[ 0.533699] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.533704] software IO TLB [mem 0x7fbd3000-0x83bd3000] (64MB) mapped at [ffff94b93fbd3000-ffff94b943bd2fff]
[ 0.533951] audit: initializing netlink subsys (disabled)
[ 0.533964] audit: type=2000 audit(1516644024.500:1): initialized
[ 0.534266] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.534372] zbud: loaded
[ 0.535087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.535131] io scheduler noop registered
[ 0.535134] io scheduler deadline registered
[ 0.535147] io scheduler cfq registered (default)
[ 0.535577] aer 0000:00:1d.0:pcie002: service driver aer loaded
[ 0.535589] aer 0000:00:1d.2:pcie002: service driver aer loaded
[ 0.535600] aer 0000:00:1d.3:pcie002: service driver aer loaded
[ 0.535609] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[ 0.535611] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.535614] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[ 0.535619] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[ 0.535621] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.535624] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[ 0.535628] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[ 0.535630] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.535633] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[ 0.535637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.535641] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.535650] efifb: probing for efifb
[ 0.535658] efifb: framebuffer at 0x9f000000, using 3072k, total 3072k
[ 0.535660] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.535661] efifb: scrolling: redraw
[ 0.535663] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.558084] Console: switching to colour frame buffer device 128x48
[ 0.579791] fb0: EFI VGA frame buffer device
[ 0.579968] intel_idle: MWAIT substates: 0x142120
[ 0.579969] intel_idle: v0.4.1 model 0x9E
[ 0.580170] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.580453] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.580736] pstore: using zlib compression
[ 0.580904] pstore: Registered erst as persistent store backend
[ 0.581373] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 0.581697] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.602894] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.603658] Linux agpgart interface v0.103
[ 0.603845] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.604071] AMD IOMMUv2 functionality not available on this system
[ 0.604814] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.562638] tsc: Refined TSC clocksource calibration: 3791.982 MHz
[ 1.562892] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5184cc4c3, max_idle_ns: 881590856055 ns
[ 1.683909] i8042: No controller found
[ 1.684158] mousedev: PS/2 mouse device common for all mice
[ 1.684388] rtc_cmos 00:04: RTC can wake from S4
[ 1.684958] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.685280] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.685571] intel_pstate: Intel P-state driver initializing
[ 1.685831] intel_pstate: Disabling energy efficiency optimization
[ 1.686719] intel_pstate: HWP enabled
[ 1.687161] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.687803] NET: Registered protocol family 10
[ 1.699594] mip6: Mobile IPv6
[ 1.709394] NET: Registered protocol family 17
[ 1.719174] mpls_gso: MPLS GSO support
[ 1.729089] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 1.739009] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.749200] registered taskstats version 1
[ 1.759068] zswap: loaded using pool lzo/zbud
[ 1.768927] ima: No TPM chip found, activating TPM-bypass!
[ 1.779413] rtc_cmos 00:04: setting system clock to 2018-01-22 18:00:26 UTC (1516644026)
[ 1.789707] PM: Hibernation image not present or could not be loaded.
[ 1.790347] Freeing unused kernel memory: 1408K
[ 1.800495] Write protecting the kernel read-only data: 12288k
[ 1.811026] Freeing unused kernel memory: 1980K
[ 1.822372] Freeing unused kernel memory: 1248K
[ 1.834742] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.872950] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.883055] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.890908] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.891884] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.913021] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.915002] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.915103] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.915342] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.916088] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.916258] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.986026] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.008818] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.017420] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.027075] ACPI: bus type USB registered
[ 2.035456] usbcore: registered new interface driver usbfs
[ 2.037012] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.037013] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.060401] usbcore: registered new interface driver hub
[ 2.068733] usbcore: registered new device driver usb
[ 2.077032] pps_core: LinuxPPS API ver. 1 registered
[ 2.077925] SCSI subsystem initialized
[ 2.093129] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.101328] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 2.109425] PTP clock support registered
[ 2.109546] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.110959] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.133869] dca service started, version 1.12.1
[ 2.136060] libata version 3.00 loaded.
[ 2.142919] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 2.147130] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.147134] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.167142] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.170492] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 2.170864] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 2.175178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.175179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.175180] usb usb1: Product: xHCI Host Controller
[ 2.175180] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 2.175181] usb usb1: SerialNumber: 0000:00:14.0
[ 2.178827] hub 1-0:1.0: USB hub found
[ 2.179758] hub 1-0:1.0: 16 ports detected
[ 2.195304] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.195306] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.197044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.197048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.197070] usb usb2: Product: xHCI Host Controller
[ 2.197083] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 2.197091] usb usb2: SerialNumber: 0000:00:14.0
[ 2.200412] hub 2-0:1.0: USB hub found
[ 2.200869] hub 2-0:1.0: 10 ports detected
[ 2.245542] AVX2 version of gcm_enc/dec engaged.
[ 2.245550] AES CTR mode by8 optimization enabled
[ 2.328641] ahci 0000:00:17.0: version 3.0
[ 2.329041] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 2.337253] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 2.337511] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
[ 2.372727] pps pps0: new PPS source ptp0
[ 2.381443] igb 0000:02:00.0: added PHC on eth0
[ 2.390310] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.399424] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00
[ 2.408728] igb 0000:02:00.0: eth0: PBA No: 006200-000
[ 2.417873] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.427723] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
[ 2.437097] scsi host0: ahci
[ 2.446493] scsi host1: ahci
[ 2.455726] scsi host2: ahci
[ 2.464780] scsi host3: ahci
[ 2.473637] scsi host4: ahci
[ 2.482462] scsi host5: ahci
[ 2.491238] scsi host6: ahci
[ 2.499827] scsi host7: ahci
[ 2.508196] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 125
[ 2.516572] pps pps1: new PPS source ptp1
[ 2.516625] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 125
[ 2.516717] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 125
[ 2.516771] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 125
[ 2.516837] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 125
[ 2.516902] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 125
[ 2.517004] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 125
[ 2.517072] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 125
[ 2.551161] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 2.588262] clocksource: Switched to clocksource tsc
[ 2.588263] igb 0000:03:00.0: added PHC on eth1
[ 2.588264] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.588265] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01
[ 2.590334] igb 0000:03:00.0: eth1: PBA No: 006200-000
[ 2.590337] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.619595] igb 0000:03:00.0 eno2: renamed from eth1
[ 2.674743] igb 0000:02:00.0 eno1: renamed from eth0
[ 2.712162] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10
[ 2.719434] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.726691] usb 1-1: Product: Virtual Keyboard and Mouse
[ 2.733873] usb 1-1: Manufacturer: American Megatrends Inc.
[ 2.741068] usb 1-1: SerialNumber: serial
[ 2.750581] usbcore: registered new interface driver usbhid
[ 2.757731] usbhid: USB HID core driver
[ 2.765174] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
[ 2.780620] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
[ 2.797234] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
[ 2.814708] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
[ 2.832892] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.842029] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.850988] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.860393] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.872162] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.881225] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.889764] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.898047] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.907057] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 2.915509] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.924200] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 2.933024] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.947797] ata1.00: configured for UDMA/133
[ 2.957200] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 2.957790] ata2.00: configured for UDMA/133
[ 3.007025] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 3.057330] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 3.058029] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 3.062739] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.062742] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.063684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.095507] sd 0:0:0:0: [sda] Write Protect is off
[ 3.105321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.105328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116168] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.126647] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.164611] sda: sda1 sda2 sda3 sda4
[ 3.175148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.375353] md: bind<sda4>
[ 3.435301] md: bind<sda2>
[ 3.451808] md: bind<sdb2>
[ 3.472088] md: raid1 personality registered for level 1
[ 3.481982] md: bind<sdb4>
[ 3.491929] md/raid1:md2: active with 2 out of 2 mirrors
[ 3.501944] md2: detected capacity change from 0 to 20970405888
[ 3.505117] md/raid1:md4: active with 2 out of 2 mirrors
[ 3.506133] created bitmap (29 pages) for device md4
[ 3.508624] md4: bitmap initialized from disk: read 2 pages, set 4 of 59234 bits
[ 3.534160] md4: detected capacity change from 0 to 3975079198720
[ 3.553269] random: fast init done
[ 3.784726] device-mapper: uevent: version 1.0.3
[ 3.794890] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 4.504900] random: crng init done
[ 5.720305] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.730371] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.741026] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.751277] sis900.c: v1.08.10 Apr. 2 2006
[ 5.763085] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 5.773133] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 5.781917] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 5.791882] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.800774] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.812409] sky2: driver version 1.30
[ 5.822170] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 5.835530] megasas: 06.811.02.00-rc1
[ 5.851630] md: raid0 personality registered for level 0
[ 5.926575] raid6: sse2x1 gen() 14714 MB/s
[ 6.002575] raid6: sse2x1 xor() 10408 MB/s
[ 6.078577] raid6: sse2x2 gen() 18188 MB/s
[ 6.154573] raid6: sse2x2 xor() 12711 MB/s
[ 6.230573] raid6: sse2x4 gen() 20751 MB/s
[ 6.306572] raid6: sse2x4 xor() 14037 MB/s
[ 6.382567] raid6: avx2x1 gen() 29218 MB/s
[ 6.458571] raid6: avx2x2 gen() 33332 MB/s
[ 6.534564] raid6: avx2x4 gen() 37118 MB/s
[ 6.542874] raid6: using algorithm avx2x4 gen() 37118 MB/s
[ 6.551142] raid6: using avx2x2 recovery algorithm
[ 6.559811] xor: automatically using best checksumming function avx
[ 6.568592] async_tx: api initialized (async)
[ 6.577787] md: raid6 personality registered for level 6
[ 6.586039] md: raid5 personality registered for level 5
[ 6.594095] md: raid4 personality registered for level 4
[ 6.603494] Fusion MPT base driver 3.04.20
[ 6.611261] Copyright (c) 1999-2008 LSI Corporation
[ 6.619482] Fusion MPT SPI Host driver 3.04.20
[ 6.628367] Fusion MPT SAS Host driver 3.04.20
[ 6.636891] Fusion MPT misc device (ioctl) driver 3.04.20
[ 6.644784] mptctl: Registered with Fusion MPT base driver
[ 6.652823] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 6.665141] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 6.673375] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 6.683269] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 6.692586] QLogic/NetXen Network Driver v4.0.82
[ 6.702597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.711788] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.721154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.730679] md: linear personality registered for level -1
[ 6.739574] md: multipath personality registered for level -4
[ 6.751841] md: raid10 personality registered for level 10
[ 16.789057] Btrfs loaded, crc32c=crc32c-intel
[ 20.929282] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 21.585428] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.676807] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 21.694335] systemd[1]: Detected architecture x86-64.
[ 21.746330] systemd[1]: Set hostname to <y00>.
[ 22.161912] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked.
[ 22.172010] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 22.191996] systemd[1]: Listening on Journal Socket.
[ 22.212033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 22.233022] systemd[1]: Listening on Journal Audit Socket.
[ 22.254574] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 22.276564] systemd[1]: Created slice User and Session Slice.
[ 22.584229] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
[ 22.747466] systemd-journald[665]: Received request to flush runtime journal from PID 1
[ 23.208143] igb 0000:02:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 23.216416] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 23.224832] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 23.295280] EFI Variables Facility v0.08 2004-May-17
[ 23.306670] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 23.317841] ACPI: Sleep Button [SLPB]
[ 23.328930] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 23.339866] ACPI: Power Button [PWRF]
[ 23.362042] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 23.511830] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 23.520954] mei_me 0000:00:16.1: Device doesn't have valid ME Interface
[ 23.533366] Bluetooth: Core ver 2.22
[ 23.542147] NET: Registered protocol family 31
[ 23.551013] Bluetooth: HCI device and connection manager initialized
[ 23.560042] Bluetooth: HCI socket layer initialized
[ 23.568989] Bluetooth: L2CAP socket layer initialized
[ 23.570198] acpi INT33D6:00: intel-vbtn: created platform device
[ 23.574059] input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input5
[ 23.596361] Bluetooth: SCO socket layer initialized
[ 23.596582] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.631679] iTCO_vendor_support: vendor-support=0
[ 23.663292] Bluetooth: HCI UART driver ver 2.3
[ 23.672423] Bluetooth: HCI UART protocol H4 registered
[ 23.681576] Bluetooth: HCI UART protocol BCSP registered
[ 23.690584] Bluetooth: HCI UART protocol LL registered
[ 23.699413] Bluetooth: HCI UART protocol ATH3K registered
[ 23.708237] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 23.717117] Bluetooth: HCI UART protocol Intel registered
[ 23.725842] Bluetooth: HCI UART protocol Broadcom registered
[ 23.726235] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.726686] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 23.735751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.738880] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 23.769163] Bluetooth: HCI UART protocol QCA registered
[ 23.778036] Bluetooth: HCI UART protocol AG6XX registered
[ 23.786870] Bluetooth: HCI UART protocol Marvell registered
[ 23.798362] [drm] Initialized
[ 23.871372] checking generic (9f000000 300000) vs hw (9f000000 1000000)
[ 23.871373] fb: switching to mgag200drmfb from EFI VGA
[ 23.880186] Console: switching to colour dummy device 80x25
[ 23.887634] [TTM] Zone kernel: Available graphics memory: 16297684 kiB
[ 23.887636] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 23.887638] [TTM] Initializing pool allocator
[ 23.887642] [TTM] Initializing DMA pool allocator
[ 23.919887] fbcon: mgadrmfb (fb0) is primary device
[ 23.919935] Console: switching to colour frame buffer device 128x48
[ 24.193557] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device
[ 24.222500] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0
[ 24.438528] power_meter ACPI000D:00: Found ACPI power meter.
[ 24.438716] wmi: Mapper loaded
[ 24.551259] power_meter ACPI000D:00: Found ACPI power meter.
[ 24.551328] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 24.607531] intel_rapl: Found RAPL domain package
[ 24.607557] intel_rapl: Found RAPL domain core
[ 24.607579] intel_rapl: Found RAPL domain dram
[ 25.837410] Adding 4094972k swap on /dev/sda3. Priority:-1 extents:1 across:4094972k FS
[ 25.927978] ppdev: user-space parallel port driver
[ 26.350799] Adding 4094972k swap on /dev/sdb3. Priority:-2 extents:1 across:4094972k FS
[ 26.894631] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 26.901866] xenbr0: port 1(eno2) entered blocking state
[ 26.902245] xenbr0: port 1(eno2) entered disabled state
[ 26.902648] device eno2 entered promiscuous mode
[ 26.948074] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 26.948211] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 26.951530] xenbr0: port 1(eno2) entered blocking state
[ 26.951531] xenbr0: port 1(eno2) entered forwarding state
[ 26.953978] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[-- Attachment #7: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-23 9:10 ` Jan Beulich
@ 2018-01-23 9:39 ` msd+xen-devel
2018-01-23 10:09 ` Jan Beulich
0 siblings, 1 reply; 9+ messages in thread
From: msd+xen-devel @ 2018-01-23 9:39 UTC (permalink / raw)
To: xen-devel, JBeulich
> ... your report is very likely duplicating earlier ones where the
> ACPI root point cannot be found without it being properly
> propagated through by grub from EFI to Xen. Iirc the only
> way around that is to chainload xen.efi, if the grub used
> doesn't support the extensions needed to boot Xen via the
> multiboot2 protocol (support for which was added during the
> 4.9 development cycle).
Thanks. So if I want to boot Xen through grub, I need Xen >= 4.9 and
which version of grub ?
Guillaume
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-23 9:39 ` msd+xen-devel
@ 2018-01-23 10:09 ` Jan Beulich
2018-01-23 11:32 ` Daniel Kiper
0 siblings, 1 reply; 9+ messages in thread
From: Jan Beulich @ 2018-01-23 10:09 UTC (permalink / raw)
To: msd+xen-devel, Daniel Kiper; +Cc: xen-devel
>>> On 23.01.18 at 10:39, <msd+xen-devel@msd.im> wrote:
>> ... your report is very likely duplicating earlier ones where the
>> ACPI root point cannot be found without it being properly
>> propagated through by grub from EFI to Xen. Iirc the only
>> way around that is to chainload xen.efi, if the grub used
>> doesn't support the extensions needed to boot Xen via the
>> multiboot2 protocol (support for which was added during the
>> 4.9 development cycle).
>
> Thanks. So if I want to boot Xen through grub, I need Xen >= 4.9 and
> which version of grub ?
I'm afraid this isn't necessarily tied to a version number.
Daniel?
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-23 10:09 ` Jan Beulich
@ 2018-01-23 11:32 ` Daniel Kiper
2018-01-23 12:03 ` msd+xen-devel
0 siblings, 1 reply; 9+ messages in thread
From: Daniel Kiper @ 2018-01-23 11:32 UTC (permalink / raw)
To: Jan Beulich; +Cc: xen-devel, msd+xen-devel
On Tue, Jan 23, 2018 at 03:09:19AM -0700, Jan Beulich wrote:
> >>> On 23.01.18 at 10:39, <msd+xen-devel@msd.im> wrote:
> >> ... your report is very likely duplicating earlier ones where the
> >> ACPI root point cannot be found without it being properly
> >> propagated through by grub from EFI to Xen. Iirc the only
> >> way around that is to chainload xen.efi, if the grub used
> >> doesn't support the extensions needed to boot Xen via the
> >> multiboot2 protocol (support for which was added during the
> >> 4.9 development cycle).
> >
> > Thanks. So if I want to boot Xen through grub, I need Xen >= 4.9 and
> > which version of grub ?
>
> I'm afraid this isn't necessarily tied to a version number.
> Daniel?
Could you send me more info? I need at least GRUB2 version, Xen version,
GRUB2 command lines used to boot Xen, Xen and dom0 kernel boot logs.
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-23 11:32 ` Daniel Kiper
@ 2018-01-23 12:03 ` msd+xen-devel
2018-01-23 17:56 ` Daniel Kiper
0 siblings, 1 reply; 9+ messages in thread
From: msd+xen-devel @ 2018-01-23 12:03 UTC (permalink / raw)
To: Daniel Kiper, Jan Beulich; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 1432 bytes --]
> I need at least GRUB2 version, Xen version
```
# apt-cache policy grub2-common
grub2-common:
Installé : 2.02~beta3-5
Candidat : 2.02~beta3-5
Table de version :
*** 2.02~beta3-5 500
500 http://debian.mirrors.ovh.net/debian stretch/main amd64
Packages
100 /var/lib/dpkg/status
# cat /proc/cpuinfo
model name : Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz
microcode : 0x5e
flags : fpu de tsc msr pae mce cx8 apic sep mca cmov pat
clflush acpi mmx fxsr sse sse2 ht syscall nx lm constant_tsc
arch_perfmon rep_good nopl nonstop_tsc eagerfpu pni pclmulqdq monitor
est ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand
hypervisor lahf_lm abm 3dnowprefetch epb fsgsbase bmi1 hle avx2 bmi2
erms rtm rdseed adx clflushopt xsaveopt xsavec xgetbv1 dtherm ida arat
pln pts hwp hwp_notify hwp_act_window hwp_epp
# xl info
release : 4.9.0-5-amd64
version : #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
xen_version : 4.8.3-pre
# cat /etc/debian_version
9.3
```
> GRUB2 command lines used to boot Xen
I attached "grub.cfg". I use the menuentry 'Debian GNU/Linux, avec
hyperviseur Xen'.
> Xen and dom0 kernel boot logs
"efi-grub-xen_dmesg_1-core.txt" contains kernel boot logs (`dmesg`), and
"efi-grub-xen_xl-dmesg_1-core.txt" contains Xen boot logs (`xl dmesg`).
Let me know if you need more things.
Regards,
Guillaume
[-- Attachment #2: efi-grub-xen_dmesg_1-core.txt --]
[-- Type: text/plain, Size: 51007 bytes --]
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[ 0.000000] Command line: placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash acpi=off
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] Xen: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000881c5fff] usable
[ 0.000000] Xen: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000881c7000-0x0000000088210fff] reserved
[ 0.000000] Xen: [mem 0x0000000088211000-0x0000000088282fff] usable
[ 0.000000] Xen: [mem 0x0000000088283000-0x0000000088302fff] type 20
[ 0.000000] Xen: [mem 0x0000000088303000-0x0000000089ec1fff] reserved
[ 0.000000] Xen: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS
[ 0.000000] Xen: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data
[ 0.000000] Xen: [mem 0x0000000089fff000-0x0000000089ffffff] usable
[ 0.000000] Xen: [mem 0x000000008a000000-0x000000008bffffff] reserved
[ 0.000000] Xen: [mem 0x0000000090000000-0x0000000095ffffff] reserved
[ 0.000000] Xen: [mem 0x0000000098000000-0x000000009dffffff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved
[ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x0000000861ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01f36000, 0x01f36fff] PGTABLE
[ 0.000000] BRK [0x01f37000, 0x01f37fff] PGTABLE
[ 0.000000] BRK [0x01f38000, 0x01f38fff] PGTABLE
[ 0.000000] BRK [0x01f39000, 0x01f39fff] PGTABLE
[ 0.000000] BRK [0x01f3a000, 0x01f3afff] PGTABLE
[ 0.000000] BRK [0x01f3b000, 0x01f3bfff] PGTABLE
[ 0.000000] BRK [0x01f3c000, 0x01f3cfff] PGTABLE
[ 0.000000] BRK [0x01f3d000, 0x01f3dfff] PGTABLE
[ 0.000000] BRK [0x01f3e000, 0x01f3efff] PGTABLE
[ 0.000000] BRK [0x01f3f000, 0x01f3ffff] PGTABLE
[ 0.000000] BRK [0x01f40000, 0x01f40fff] PGTABLE
[ 0.000000] BRK [0x01f41000, 0x01f41fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x02000000-0x0338efff]
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7cbc65000-0x7cbc69fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff]
[ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff]
[ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff]
[ 0.000000] On node 0 totalpages: 8298966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8649 pages used for memmap
[ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31
[ 0.000000] Normal zone: 120960 pages used for memmap
[ 0.000000] Normal zone: 7741440 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 491049 page(s)
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Boot CPU (id 255) not listed by BIOS
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x88302fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88303000-0x89ec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.3-pre (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff880843800000 s105304 r8192 d29864 u2097152
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8169272
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x83f800000-0x843800000] (64MB) mapped at [ffff88083f800000-ffff8808437fffff]
[ 0.000000] Memory: 31943512K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 1252352K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:33024 nr_irqs:32 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3800.000 MHz processor
[ 3.285631] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.11 BogoMIPS (lpj=15168224)
[ 3.285635] pid_max: default: 32768 minimum: 301
[ 3.285820] Security Framework initialized
[ 3.285822] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 3.285827] AppArmor: AppArmor disabled by boot time parameter
[ 3.288525] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 3.292764] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 3.294288] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.294330] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.294555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 3.294557] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 3.294562] CPU: Physical Processor ID: 0
[ 3.294563] CPU: Processor Core ID: 0
[ 3.294567] mce: CPU supports 2 MCE banks
[ 3.294581] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 3.294583] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 3.309350] Freeing SMP alternatives memory: 24K
[ 3.310349] ftrace: allocating 25212 entries in 99 pages
[ 3.316354] cpu 0 spinlock event irq 1
[ 3.316358] smpboot: Max logical packages: 1
[ 3.316360] VPMU disabled by hypervisor.
[ 3.316368] Performance Events: Skylake events, PMU not available due to virtualization, using software events only.
[ 3.316724] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 3.316726] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 3.316733] x86: Booted up 1 node, 1 CPUs
[ 3.317212] devtmpfs: initialized
[ 3.317243] x86/mm: Memory block size: 128MB
[ 3.320135] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes)
[ 3.320139] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes)
[ 3.320170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.320177] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 3.320193] pinctrl core: initialized pinctrl subsystem
[ 3.320248] NET: Registered protocol family 16
[ 3.320254] xen:grant_table: Grant tables using version 1 layout
[ 3.320259] Grant table initialized
[ 3.320425] PCI: Using configuration type 1 for base access
[ 3.321149] ACPI: Interpreter disabled.
[ 3.321154] xen:balloon: Initialising balloon driver
[ 3.323552] xen_balloon: Initialising balloon driver
[ 3.323588] vgaarb: loaded
[ 3.323604] dmi: Firmware registration failed.
[ 3.323620] PCI: Probing PCI hardware
[ 3.323622] PCI: root bus 00: using default resources
[ 3.323623] PCI: Probing PCI hardware (bus 00)
[ 3.323636] PCI host bridge to bus 0000:00
[ 3.323639] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.323641] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 3.323643] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 3.323654] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000
[ 3.323800] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 3.323825] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit]
[ 3.323916] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.323966] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 3.323991] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit]
[ 3.324143] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 3.324182] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit]
[ 3.324319] pci 0000:00:16.0: PME# supported from D3hot
[ 3.324405] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
[ 3.324449] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit]
[ 3.324612] pci 0000:00:16.1: PME# supported from D3hot
[ 3.324702] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 3.324722] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff]
[ 3.324732] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff]
[ 3.324742] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047]
[ 3.324751] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b]
[ 3.324761] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
[ 3.324771] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff]
[ 3.324825] pci 0000:00:17.0: PME# supported from D3hot
[ 3.324888] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
[ 3.324966] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.325013] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 3.325092] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 3.325135] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 3.325214] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 3.325271] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 3.325432] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 3.325443] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff]
[ 3.325538] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 3.325577] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit]
[ 3.325627] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f]
[ 3.325783] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
[ 3.325804] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref]
[ 3.325820] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff]
[ 3.325836] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff]
[ 3.325898] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 3.326039] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 3.326046] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 3.326058] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 3.326065] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 3.326070] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 3.326141] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 3.326162] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff]
[ 3.326194] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
[ 3.326210] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff]
[ 3.326344] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 3.336359] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 3.336363] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 3.336366] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 3.336444] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 3.336465] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff]
[ 3.336497] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 3.336513] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff]
[ 3.336648] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 3.348366] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 3.348371] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 3.348374] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 3.348399] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[ 3.348766] PCI: pci_cache_line_size set to 64 bytes
[ 3.348858] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 3.348859] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 3.348860] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff]
[ 3.348860] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff]
[ 3.348861] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
[ 3.348861] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff]
[ 3.348942] clocksource: Switched to clocksource xen
[ 3.352624] VFS: Disk quotas dquot_6.6.0
[ 3.352633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.352645] hugetlbfs: disabling because there are no supported hugepage sizes
[ 3.352661] pnp: PnP ACPI: disabled
[ 3.353303] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 3.353333] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref]
[ 3.353336] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 3.353342] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 3.353346] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 3.353353] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 3.353356] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 3.353362] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 3.353371] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 3.353374] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 3.353379] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 3.353388] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 3.353389] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 3.353390] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff]
[ 3.353390] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref]
[ 3.353391] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 3.353391] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff]
[ 3.353392] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 3.353393] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff]
[ 3.353408] NET: Registered protocol family 2
[ 3.353629] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 3.353875] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.353948] TCP: Hash tables configured (established 262144 bind 65536)
[ 3.353993] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 3.354071] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 3.354126] NET: Registered protocol family 1
[ 3.354141] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 3.354529] PCI: CLS 128 bytes, default 64
[ 3.354551] Unpacking initramfs...
[ 3.568900] Freeing initrd memory: 20028K
[ 3.568988] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.569109] audit: initializing netlink subsys (disabled)
[ 3.569121] audit: type=2000 audit(1516697156.038:1): initialized
[ 3.569311] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 3.569322] zbud: loaded
[ 3.569602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.569614] io scheduler noop registered
[ 3.569616] io scheduler deadline registered
[ 3.569622] io scheduler cfq registered (default)
[ 3.569655] pcieport 0000:00:1d.0: can't find IRQ for PCI INT B; please try using pci=biosirq
[ 3.569750] pcieport 0000:00:1d.2: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 3.569830] pcieport 0000:00:1d.3: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 3.569926] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[ 3.569929] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.569933] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[ 3.569946] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[ 3.569948] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.569953] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[ 3.569964] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[ 3.569966] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.569971] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[ 3.569974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.569978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.569985] intel_idle: MWAIT substates: 0x142120
[ 3.569986] intel_idle: v0.4.1 model 0x9E
[ 3.569987] intel_idle: intel_idle yielding to none
[ 3.570150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.591185] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.591350] Linux agpgart interface v0.103
[ 3.591372] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.591374] AMD IOMMUv2 functionality not available on this system
[ 3.591423] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.679429] i8042: No controller found
[ 4.679435] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5210d88ec, max_idle_ns: 881591073901 ns
[ 4.679465] mousedev: PS/2 mouse device common for all mice
[ 4.679780] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 4.679833] genirq: Flags mismatch irq 8. 00000080 (rtc0) vs. 00000000 (xen-pcpu)
[ 4.679848] rtc_cmos: probe of rtc_cmos failed with error -16
[ 4.679853] intel_pstate: Intel P-state driver initializing
[ 4.679865] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.679867] dmi-sysfs: dmi entry is absent.
[ 4.679918] NET: Registered protocol family 10
[ 4.680011] mip6: Mobile IPv6
[ 4.680013] NET: Registered protocol family 17
[ 4.680015] mpls_gso: MPLS GSO support
[ 4.680041] mce: Unable to init device /dev/mcelog (rc: -16)
[ 4.680069] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 4.680085] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.680135] registered taskstats version 1
[ 4.680142] zswap: loaded using pool lzo/zbud
[ 4.680194] ima: No TPM chip found, activating TPM-bypass!
[ 4.680364] hctosys: unable to open rtc device (rtc0)
[ 4.680397] PM: Hibernation image not present or could not be loaded.
[ 4.680622] Freeing unused kernel memory: 1408K
[ 4.680624] Write protecting the kernel read-only data: 12288k
[ 4.682593] Freeing unused kernel memory: 1980K
[ 4.682857] Freeing unused kernel memory: 1248K
[ 4.703174] x86/mm: Checked W+X mappings: FAILED, 4090 W+X pages found.
[ 4.719646] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.719676] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720221] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720263] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720303] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720342] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720383] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720424] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720461] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.720500] random: udevadm: uninitialized urandom read (16 bytes read)
[ 4.742881] SCSI subsystem initialized
[ 4.747777] usbcore: registered new interface driver usbfs
[ 4.747784] usbcore: registered new interface driver hub
[ 4.749887] usbcore: registered new device driver usb
[ 4.750536] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.750564] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.750568] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 4.751635] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 4.751642] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 4.752412] pps_core: LinuxPPS API ver. 1 registered
[ 4.752415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.752527] PTP clock support registered
[ 4.752623] dca service started, version 1.12.1
[ 4.753366] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 4.753368] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.753396] igb 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.754087] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
[ 4.756562] libata version 3.00 loaded.
[ 4.758898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.758901] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.758904] usb usb1: Product: xHCI Host Controller
[ 4.758906] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 4.758908] usb usb1: SerialNumber: 0000:00:14.0
[ 4.758967] hub 1-0:1.0: USB hub found
[ 4.758983] hub 1-0:1.0: 16 ports detected
[ 4.759739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.759742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.759764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.759766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.759769] usb usb2: Product: xHCI Host Controller
[ 4.759770] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 4.759772] usb usb2: SerialNumber: 0000:00:14.0
[ 4.760127] hub 2-0:1.0: USB hub found
[ 4.760141] hub 2-0:1.0: 10 ports detected
[ 4.760563] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[ 4.760577] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 4.760589] i801_smbus 0000:00:1f.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.760606] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 4.760622] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 0003ce00 (timer0)
[ 4.760625] i801_smbus 0000:00:1f.4: Failed to allocate irq 0: -16
[ 4.760627] i801_smbus 0000:00:1f.4: SMBus using polling
[ 4.760786] ahci 0000:00:17.0: version 3.0
[ 4.760794] ahci 0000:00:17.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.762635] AVX2 version of gcm_enc/dec engaged.
[ 4.762637] AES CTR mode by8 optimization enabled
[ 4.770945] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 4.770949] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 4.778403] pps pps0: new PPS source ptp0
[ 4.778406] igb 0000:02:00.0: added PHC on eth0
[ 4.778408] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.778410] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00
[ 4.778459] igb 0000:02:00.0: eth0: PBA No: 006200-000
[ 4.778461] igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 4.778533] igb 0000:03:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 4.779219] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
[ 4.802837] pps pps1: new PPS source ptp1
[ 4.802840] igb 0000:03:00.0: added PHC on eth1
[ 4.802842] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.802844] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01
[ 4.802893] igb 0000:03:00.0: eth1: PBA No: 006200-000
[ 4.802895] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 4.805179] igb 0000:02:00.0 enp2s0: renamed from eth0
[ 4.807764] igb 0000:03:00.0 enp3s0: renamed from eth1
[ 4.853908] scsi host0: ahci
[ 4.854029] scsi host1: ahci
[ 4.854140] scsi host2: ahci
[ 4.854250] scsi host3: ahci
[ 4.854361] scsi host4: ahci
[ 4.854469] scsi host5: ahci
[ 4.854578] scsi host6: ahci
[ 4.854687] scsi host7: ahci
[ 4.854713] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 18
[ 4.854716] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 18
[ 4.854719] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 18
[ 4.854722] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 18
[ 4.854725] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 18
[ 4.854728] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 18
[ 4.854731] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 18
[ 4.854734] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 18
[ 5.084947] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 5.167122] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.167139] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.167151] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.167164] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.167178] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.167189] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.171107] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.171120] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.185427] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 5.185429] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.185723] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 5.185725] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.190991] ata1.00: configured for UDMA/133
[ 5.191049] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 5.191290] ata2.00: configured for UDMA/133
[ 5.191335] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 5.194206] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 5.194213] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 5.194236] sd 0:0:0:0: [sda] Write Protect is off
[ 5.194238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.194241] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.194243] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.194251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.194256] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.240713] sda: sda1 sda2 sda3 sda4
[ 5.240856] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.242292] sdb: sdb1 sdb2 sdb3 sdb4
[ 5.242682] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.246039] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10
[ 5.246042] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.246044] usb 1-1: Product: Virtual Keyboard and Mouse
[ 5.246046] usb 1-1: Manufacturer: American Megatrends Inc.
[ 5.246048] usb 1-1: SerialNumber: serial
[ 5.247891] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.249601] usbcore: registered new interface driver usbhid
[ 5.249603] usbhid: USB HID core driver
[ 5.250150] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
[ 5.250804] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
[ 5.250879] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
[ 5.250914] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
[ 5.339325] random: fast init done
[ 5.440252] md: bind<sdb4>
[ 5.508791] md: bind<sda4>
[ 5.565775] md: raid1 personality registered for level 1
[ 5.565947] md/raid1:md4: active with 2 out of 2 mirrors
[ 5.566153] created bitmap (29 pages) for device md4
[ 5.566786] md4: bitmap initialized from disk: read 2 pages, set 0 of 59234 bits
[ 5.580596] md: bind<sdb2>
[ 5.602555] md4: detected capacity change from 0 to 3975079198720
[ 5.604621] md: bind<sda2>
[ 5.607062] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.607073] md2: detected capacity change from 0 to 20970405888
[ 5.690051] clocksource: Switched to clocksource tsc
[ 5.835355] device-mapper: uevent: version 1.0.3
[ 5.835517] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 6.847797] random: crng init done
[ 7.524866] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.524870] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.528421] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.531445] sis900.c: v1.08.10 Apr. 2 2006
[ 7.534495] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 7.538602] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.538604] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.542133] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 7.542136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 7.552761] sky2: driver version 1.30
[ 7.555759] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 7.570351] megasas: 06.811.02.00-rc1
[ 7.596280] md: raid0 personality registered for level 0
[ 7.664945] raid6: sse2x1 gen() 13408 MB/s
[ 7.732944] raid6: sse2x1 xor() 9482 MB/s
[ 7.800943] raid6: sse2x2 gen() 16702 MB/s
[ 7.868945] raid6: sse2x2 xor() 11559 MB/s
[ 7.936945] raid6: sse2x4 gen() 19278 MB/s
[ 8.004944] raid6: sse2x4 xor() 13312 MB/s
[ 8.072944] raid6: avx2x1 gen() 26501 MB/s
[ 8.140944] raid6: avx2x2 gen() 31391 MB/s
[ 8.208944] raid6: avx2x4 gen() 33433 MB/s
[ 8.208945] raid6: using algorithm avx2x4 gen() 33433 MB/s
[ 8.208947] raid6: using avx2x2 recovery algorithm
[ 8.210746] xor: automatically using best checksumming function avx
[ 8.211163] async_tx: api initialized (async)
[ 8.216494] md: raid6 personality registered for level 6
[ 8.216497] md: raid5 personality registered for level 5
[ 8.216498] md: raid4 personality registered for level 4
[ 8.222164] Fusion MPT base driver 3.04.20
[ 8.222167] Copyright (c) 1999-2008 LSI Corporation
[ 8.223206] Fusion MPT SPI Host driver 3.04.20
[ 8.229819] Fusion MPT SAS Host driver 3.04.20
[ 8.235960] Fusion MPT misc device (ioctl) driver 3.04.20
[ 8.236313] mptctl: Registered with Fusion MPT base driver
[ 8.236316] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 8.250898] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 8.250902] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 8.257093] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 8.260299] QLogic/NetXen Network Driver v4.0.82
[ 8.266578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.268993] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.272109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.275580] md: linear personality registered for level -1
[ 8.277850] md: multipath personality registered for level -4
[ 8.287025] md: raid10 personality registered for level 10
[ 18.297450] Btrfs loaded, crc32c=crc32c-intel
[ 22.265076] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 22.861676] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.881329] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 22.881362] systemd[1]: Detected virtualization xen.
[ 22.881367] systemd[1]: Detected architecture x86-64.
[ 22.914477] systemd[1]: Set hostname to <y00>.
[ 23.271620] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked.
[ 23.271904] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 23.271997] systemd[1]: Listening on udev Kernel Socket.
[ 23.272114] systemd[1]: Created slice System Slice.
[ 23.272210] systemd[1]: Created slice system-getty.slice.
[ 23.272300] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 23.426245] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
[ 23.533340] systemd-journald[599]: Received request to flush runtime journal from PID 1
[ 23.789438] igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 23.913654] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 23.913663] mei_me 0000:00:16.1: Device doesn't have valid ME Interface
[ 23.917048] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.952936] iTCO_vendor_support: vendor-support=0
[ 23.962720] [drm] Initialized
[ 23.964739] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.964838] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 23.965564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.965582] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 23.975964] igb 0000:03:00.0 eno2: renamed from enp3s0
[ 24.014351] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 24.022813] mgag200 0000:01:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 24.042499] [TTM] Zone kernel: Available graphics memory: 15984100 kiB
[ 24.042501] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 24.042503] [TTM] Initializing pool allocator
[ 24.042507] [TTM] Initializing DMA pool allocator
[ 24.074527] Console: switching to colour frame buffer device 128x48
[ 24.362960] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device
[ 24.366114] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0
[ 24.484100] intel_rapl: Found RAPL domain package
[ 24.484113] intel_rapl: Found RAPL domain core
[ 24.484123] intel_rapl: Found RAPL domain dram
[ 24.522104] Adding 4094972k swap on /dev/sdb3. Priority:-1 extents:1 across:4094972k FS
[ 25.325498] Adding 4094972k swap on /dev/sda3. Priority:-2 extents:1 across:4094972k FS
[ 27.086856] xen:xen_evtchn: Event-channel device installed
[ 27.167126] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 27.185491] xenbr0: port 1(eno2) entered blocking state
[ 27.185856] xenbr0: port 1(eno2) entered disabled state
[ 27.187222] device eno2 entered promiscuous mode
[ 27.212828] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 27.217763] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 28.217119] xenbr0: port 1(eno2) entered blocking state
[ 28.217464] xenbr0: port 1(eno2) entered forwarding state
[ 28.217932] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 33.537305] xenbr0: port 2(vif1.0) entered blocking state
[ 33.537320] xenbr0: port 2(vif1.0) entered disabled state
[ 33.537428] device vif1.0 entered promiscuous mode
[ 33.538786] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 33.567607] Bridge firewalling registered
[ 34.224748] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 34.228555] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 34.308481] vif vif-1-0 vif1.0: Guest Rx ready
[ 34.308598] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
[ 34.308626] xenbr0: port 2(vif1.0) entered blocking state
[ 34.308637] xenbr0: port 2(vif1.0) entered forwarding state
[ 41.403575] xenbr0: port 3(vif2.0) entered blocking state
[ 41.403588] xenbr0: port 3(vif2.0) entered disabled state
[ 41.403676] device vif2.0 entered promiscuous mode
[ 41.491212] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
[ 42.648483] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 42.653378] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 42.815705] vif vif-2-0 vif2.0: Guest Rx ready
[ 42.815830] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
[ 42.815860] xenbr0: port 3(vif2.0) entered blocking state
[ 42.815870] xenbr0: port 3(vif2.0) entered forwarding state
[ 49.038271] xenbr0: port 4(vif3.0) entered blocking state
[ 49.038287] xenbr0: port 4(vif3.0) entered disabled state
[ 49.038393] device vif3.0 entered promiscuous mode
[ 49.039650] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
[ 49.791640] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 49.796290] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 50.326686] vif vif-3-0 vif3.0: Guest Rx ready
[ 50.326843] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
[ 50.326871] xenbr0: port 4(vif3.0) entered blocking state
[ 50.326882] xenbr0: port 4(vif3.0) entered forwarding state
[ 57.572001] xenbr0: port 5(vif4.0) entered blocking state
[ 57.572016] xenbr0: port 5(vif4.0) entered disabled state
[ 57.572264] device vif4.0 entered promiscuous mode
[ 57.573836] IPv6: ADDRCONF(NETDEV_UP): vif4.0: link is not ready
[ 58.548118] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 58.609044] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 59.463178] vif vif-4-0 vif4.0: Guest Rx ready
[ 59.463654] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready
[ 59.464027] xenbr0: port 5(vif4.0) entered blocking state
[ 59.464374] xenbr0: port 5(vif4.0) entered forwarding state
[ 64.568851] xenbr0: port 6(vif5.0) entered blocking state
[ 64.569239] xenbr0: port 6(vif5.0) entered disabled state
[ 64.569722] device vif5.0 entered promiscuous mode
[ 64.571501] IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready
[ 65.637767] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 65.656995] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 65.871871] vif vif-5-0 vif5.0: Guest Rx ready
[ 65.872361] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready
[ 65.872752] xenbr0: port 6(vif5.0) entered blocking state
[ 65.873116] xenbr0: port 6(vif5.0) entered forwarding state
[ 73.236275] xenbr0: port 7(vif6.0) entered blocking state
[ 73.236684] xenbr0: port 7(vif6.0) entered disabled state
[ 73.237215] device vif6.0 entered promiscuous mode
[ 73.238874] IPv6: ADDRCONF(NETDEV_UP): vif6.0: link is not ready
[ 74.421130] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 74.510888] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 74.928840] vif vif-6-0 vif6.0: Guest Rx ready
[ 75.093034] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready
[ 75.093422] xenbr0: port 7(vif6.0) entered blocking state
[ 75.096578] xenbr0: port 7(vif6.0) entered forwarding state
[ 79.865032] xenbr0: port 8(vif7.0) entered blocking state
[ 79.865414] xenbr0: port 8(vif7.0) entered disabled state
[ 79.865921] device vif7.0 entered promiscuous mode
[ 79.868205] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready
[ 81.194432] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 81.201982] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 81.384701] vif vif-7-0 vif7.0: Guest Rx ready
[ 81.385188] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready
[ 81.385582] xenbr0: port 8(vif7.0) entered blocking state
[ 81.385949] xenbr0: port 8(vif7.0) entered forwarding state
[ 96.973239] xenbr0: port 9(vif8.0) entered blocking state
[ 96.973607] xenbr0: port 9(vif8.0) entered disabled state
[ 96.974057] device vif8.0 entered promiscuous mode
[ 96.975688] IPv6: ADDRCONF(NETDEV_UP): vif8.0: link is not ready
[ 99.509383] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 99.577978] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 105.045686] vif vif-8-0 vif8.0: Guest Rx ready
[ 105.046199] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready
[ 105.046603] xenbr0: port 9(vif8.0) entered blocking state
[ 105.047023] xenbr0: port 9(vif8.0) entered forwarding state
[ 114.699280] xenbr0: port 10(vif9.0) entered blocking state
[ 114.699652] xenbr0: port 10(vif9.0) entered disabled state
[ 114.700122] device vif9.0 entered promiscuous mode
[ 114.702036] IPv6: ADDRCONF(NETDEV_UP): vif9.0: link is not ready
[ 115.411529] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 115.483510] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 115.890867] vif vif-9-0 vif9.0: Guest Rx ready
[ 115.895487] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready
[ 115.895875] xenbr0: port 10(vif9.0) entered blocking state
[ 115.902242] xenbr0: port 10(vif9.0) entered forwarding state
[ 125.515538] xenbr0: port 11(vif10.0) entered blocking state
[ 125.515911] xenbr0: port 11(vif10.0) entered disabled state
[ 125.516392] device vif10.0 entered promiscuous mode
[ 125.520525] IPv6: ADDRCONF(NETDEV_UP): vif10.0: link is not ready
[ 127.007594] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 127.611709] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 132.580164] vif vif-10-0 vif10.0: Guest Rx ready
[ 132.580712] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready
[ 132.581121] xenbr0: port 11(vif10.0) entered blocking state
[ 132.581509] xenbr0: port 11(vif10.0) entered forwarding state
[ 135.645365] xenbr0: port 12(vif11.0) entered blocking state
[ 135.645810] xenbr0: port 12(vif11.0) entered disabled state
[ 135.646286] device vif11.0 entered promiscuous mode
[ 135.647999] IPv6: ADDRCONF(NETDEV_UP): vif11.0: link is not ready
[ 136.330402] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 136.400596] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 136.914735] vif vif-11-0 vif11.0: Guest Rx ready
[ 136.915241] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready
[ 136.915630] xenbr0: port 12(vif11.0) entered blocking state
[ 136.916003] xenbr0: port 12(vif11.0) entered forwarding state
[ 154.602541] xenbr0: port 13(vif12.0) entered blocking state
[ 154.602933] xenbr0: port 13(vif12.0) entered disabled state
[ 154.609637] device vif12.0 entered promiscuous mode
[ 154.633296] IPv6: ADDRCONF(NETDEV_UP): vif12.0: link is not ready
[ 157.119674] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 157.178457] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 160.380829] vif vif-12-0 vif12.0: Guest Rx ready
[ 160.381334] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready
[ 160.381728] xenbr0: port 13(vif12.0) entered blocking state
[ 160.382101] xenbr0: port 13(vif12.0) entered forwarding state
[ 298.910121] xenbr0: port 2(vif1.0) entered disabled state
[ 298.929983] xenbr0: port 2(vif1.0) entered disabled state
[ 298.930393] device vif1.0 left promiscuous mode
[ 298.930756] xenbr0: port 2(vif1.0) entered disabled state
[ 302.735254] xenbr0: port 3(vif2.0) entered disabled state
[ 303.208312] xenbr0: port 3(vif2.0) entered disabled state
[ 303.209100] device vif2.0 left promiscuous mode
[ 303.210825] xenbr0: port 3(vif2.0) entered disabled state
[ 305.976555] xenbr0: port 5(vif4.0) entered disabled state
[ 306.894474] xenbr0: port 5(vif4.0) entered disabled state
[ 306.894858] device vif4.0 left promiscuous mode
[ 306.895226] xenbr0: port 5(vif4.0) entered disabled state
[ 307.068003] xenbr0: port 4(vif3.0) entered disabled state
[ 308.606199] xenbr0: port 4(vif3.0) entered disabled state
[ 308.606604] device vif3.0 left promiscuous mode
[ 308.606970] xenbr0: port 4(vif3.0) entered disabled state
[ 313.198775] xenbr0: port 12(vif11.0) entered disabled state
[ 314.219550] xenbr0: port 8(vif7.0) entered disabled state
[ 314.219903] xenbr0: port 9(vif8.0) entered disabled state
[ 314.220234] xenbr0: port 10(vif9.0) entered disabled state
[ 315.230591] xenbr0: port 13(vif12.0) entered disabled state
[ 315.230936] xenbr0: port 7(vif6.0) entered disabled state
[ 315.646899] xenbr0: port 12(vif11.0) entered disabled state
[ 315.647638] device vif11.0 left promiscuous mode
[ 315.647945] xenbr0: port 12(vif11.0) entered disabled state
[ 315.879514] xenbr0: port 13(vif12.0) entered disabled state
[ 315.879849] device vif12.0 left promiscuous mode
[ 315.880149] xenbr0: port 13(vif12.0) entered disabled state
[ 316.261866] xenbr0: port 9(vif8.0) entered disabled state
[ 316.262216] device vif8.0 left promiscuous mode
[ 316.262535] xenbr0: port 9(vif8.0) entered disabled state
[ 316.456454] xenbr0: port 7(vif6.0) entered disabled state
[ 316.456786] device vif6.0 left promiscuous mode
[ 316.457129] xenbr0: port 7(vif6.0) entered disabled state
[ 316.608783] xenbr0: port 11(vif10.0) entered disabled state
[ 317.344330] xenbr0: port 6(vif5.0) entered disabled state
[ 317.345286] device vif5.0 left promiscuous mode
[ 317.345578] xenbr0: port 6(vif5.0) entered disabled state
[ 317.441349] xenbr0: port 8(vif7.0) entered disabled state
[ 317.441683] device vif7.0 left promiscuous mode
[ 317.441974] xenbr0: port 8(vif7.0) entered disabled state
[ 317.644587] xenbr0: port 10(vif9.0) entered disabled state
[ 317.644912] device vif9.0 left promiscuous mode
[ 317.645200] xenbr0: port 10(vif9.0) entered disabled state
[ 318.096278] xenbr0: port 11(vif10.0) entered disabled state
[ 318.096596] device vif10.0 left promiscuous mode
[ 318.096917] xenbr0: port 11(vif10.0) entered disabled state
[-- Attachment #3: efi-grub-xen_xl-dmesg_1-core.txt --]
[-- Type: text/plain, Size: 4298 bytes --]
(XEN) Xen version 4.8.3-pre (Debian 4.8.2+xsa245-0+deb9u1) (ijackson@chiark.greenend.org.uk) (gcc (Debian 6.3.0-18) 6.3.0 20170516) debug=n Sat Nov 25 11:30:34 UTC 2017
(XEN) Bootloader: GRUB 2.02~beta3-5
(XEN) Command line: placeholder no-real-mode edd=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Multiboot-e820 RAM map:
(XEN) 0000000000000000 - 0000000000058000 (usable)
(XEN) 0000000000058000 - 0000000000059000 (reserved)
(XEN) 0000000000059000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 000000000009f000 (reserved)
(XEN) 000000000009f000 - 00000000000a0000 (usable)
(XEN) 00000000000a0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000881c6000 (usable)
(XEN) 00000000881c6000 - 00000000881c7000 (ACPI NVS)
(XEN) 00000000881c7000 - 0000000088211000 (reserved)
(XEN) 0000000088211000 - 0000000088283000 (usable)
(XEN) 0000000088283000 - 0000000088303000 type 20
(XEN) 0000000088303000 - 0000000089ec2000 (reserved)
(XEN) 0000000089ec2000 - 0000000089f9a000 (ACPI NVS)
(XEN) 0000000089f9a000 - 0000000089fff000 (ACPI data)
(XEN) 0000000089fff000 - 000000008a000000 (usable)
(XEN) 000000008a000000 - 000000008c000000 (reserved)
(XEN) 0000000090000000 - 0000000096000000 (reserved)
(XEN) 0000000098000000 - 000000009e000000 (reserved)
(XEN) 00000000e00fa000 - 00000000e00fb000 (reserved)
(XEN) 00000000e00fd000 - 00000000e00fe000 (reserved)
(XEN) 00000000fe000000 - 00000000fe011000 (reserved)
(XEN) 0000000100000000 - 0000000862000000 (usable)
(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
(XEN) System RAM: 32417MB (33195868kB)
(XEN) Domain heap initialised
(XEN) Found and enabled local APIC!
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) xstate: size: 0x440 and states: 0x1f
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 1.193MHz PIT
(XEN) Detected 3792.056 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 1 CPUs
(XEN) Dom0 has maximum 208 PIRQs
(XEN) ACPI is disabled, notifying Domain 0 (acpi=off)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f63000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000846000000->0000000848000000 (8161499 pages to be allocated)
(XEN) Init. ramdisk: 0000000860c71000->0000000861fff257
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f63000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008003e5e350
(XEN) Start info: ffffffff81f63000->ffffffff81f634b4
(XEN) Page tables: ffffffff81f64000->ffffffff81f77000
(XEN) Boot stack: ffffffff81f77000->ffffffff81f78000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff81d3d180
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs
(XEN) .............................................................................................................................................................................................................................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 312kB init memory
[-- Attachment #4: efi-xen_dmesg_8-cores.txt --]
[-- Type: text/plain, Size: 56659 bytes --]
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[ 0.000000] Command line: root=/dev/md2 ro rootdelay=10 noquiet nosplash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] Xen: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000881c5fff] usable
[ 0.000000] Xen: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000881c7000-0x0000000088210fff] reserved
[ 0.000000] Xen: [mem 0x0000000088211000-0x0000000088282fff] usable
[ 0.000000] Xen: [mem 0x0000000088283000-0x0000000089ec1fff] reserved
[ 0.000000] Xen: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS
[ 0.000000] Xen: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data
[ 0.000000] Xen: [mem 0x0000000089fff000-0x0000000089ffffff] usable
[ 0.000000] Xen: [mem 0x000000008a000000-0x000000008bffffff] reserved
[ 0.000000] Xen: [mem 0x0000000090000000-0x0000000095ffffff] reserved
[ 0.000000] Xen: [mem 0x0000000098000000-0x000000009dffffff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved
[ 0.000000] Xen: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved
[ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x0000000861ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by EDK II BIOS ID:S1200SP.86B.03.01.0026.092720170729
[ 0.000000] efi: SMBIOS=0x88633000 ACPI=0x89ffe000 ACPI 2.0=0x89ffe014 PROP=0x86bb5af0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0026.092720170729 09/27/2017
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01f37000, 0x01f37fff] PGTABLE
[ 0.000000] BRK [0x01f38000, 0x01f38fff] PGTABLE
[ 0.000000] BRK [0x01f39000, 0x01f39fff] PGTABLE
[ 0.000000] BRK [0x01f3a000, 0x01f3afff] PGTABLE
[ 0.000000] BRK [0x01f3b000, 0x01f3bfff] PGTABLE
[ 0.000000] BRK [0x01f3c000, 0x01f3cfff] PGTABLE
[ 0.000000] BRK [0x01f3d000, 0x01f3dfff] PGTABLE
[ 0.000000] BRK [0x01f3e000, 0x01f3efff] PGTABLE
[ 0.000000] BRK [0x01f3f000, 0x01f3ffff] PGTABLE
[ 0.000000] BRK [0x01f40000, 0x01f40fff] PGTABLE
[ 0.000000] BRK [0x01f41000, 0x01f41fff] PGTABLE
[ 0.000000] BRK [0x01f42000, 0x01f42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x02000000-0x03376fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000089FFE014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x0000000089FB7188 0000D4 (v01 INTEL S1200SPL 00000000 INTL 01000013)
[ 0.000000] ACPI: FACP 0x0000000089FF6000 0000F4 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: DSDT 0x0000000089FC6000 029241 (v02 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: FACS 0x0000000089F7E000 000040
[ 0.000000] ACPI: HPET 0x0000000089FF5000 000038 (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: APIC 0x0000000089FF4000 0000BC (v03 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: MCFG 0x0000000089FF3000 00003C (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x0000000089FF1000 000042 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x0000000089FF0000 000040 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC3000 002BAE (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC2000 000BE3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC1000 00019A (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC0000 0004A3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: UEFI 0x0000000089F93000 000042 (v01 INTEL S1200SPL 00000002 INTL 01000013)
[ 0.000000] ACPI: SSDT 0x0000000089FBF000 000E73 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBD000 000064 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: RMAD 0x0000000089FBB000 000070 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: HEST 0x0000000089FBA000 0000A8 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x0000000089FB8000 000230 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x0000000089FF7000 005328 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBE000 000B79 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: BERT 0x0000000089FB9000 000030 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: PRAD 0x0000000089FBC000 000102 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: EINJ 0x0000000089FFD000 000130 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SPCR 0x0000000089FF2000 000050 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7c706d000-0x7c7071fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff]
[ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff]
[ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff]
[ 0.000000] On node 0 totalpages: 8298966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8649 pages used for memmap
[ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31
[ 0.000000] Normal zone: 120960 pages used for memmap
[ 0.000000] Normal zone: 7741440 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 491049 page(s)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x89ec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed90fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed91000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.3-pre (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88083ec00000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8169272
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md2 ro rootdelay=10 noquiet nosplash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x83ac00000-0x83ec00000] (64MB) mapped at [ffff88083ac00000-ffff88083ebfffff]
[ 0.000000] Memory: 31864832K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 1331032K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:33024 nr_irqs:2048 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3800.000 MHz processor
[ 762.885775] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.48 BogoMIPS (lpj=15168960)
[ 762.885779] pid_max: default: 32768 minimum: 301
[ 762.885790] ACPI: Core revision 20160831
[ 762.918994] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 762.919178] Security Framework initialized
[ 762.919180] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 762.919185] AppArmor: AppArmor disabled by boot time parameter
[ 762.921858] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 762.926093] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 762.927615] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 762.927657] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 762.927886] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 762.927889] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 762.927892] CPU: Physical Processor ID: 0
[ 762.927893] CPU: Processor Core ID: 0
[ 762.927897] mce: CPU supports 2 MCE banks
[ 762.927908] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 762.927909] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 762.928110] Freeing SMP alternatives memory: 24K
[ 762.954525] ftrace: allocating 25212 entries in 99 pages
[ 762.960568] cpu 0 spinlock event irq 121
[ 762.960572] smpboot: Max logical packages: 1
[ 762.960575] VPMU disabled by hypervisor.
[ 762.960586] Performance Events: Skylake events, PMU not available due to virtualization, using software events only.
[ 762.960947] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 762.960949] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 762.961015] installing Xen timer for CPU 1
[ 762.961216] cpu 1 spinlock event irq 133
[ 762.961279] installing Xen timer for CPU 2
[ 762.961475] cpu 2 spinlock event irq 140
[ 762.961537] installing Xen timer for CPU 3
[ 762.961737] cpu 3 spinlock event irq 147
[ 762.961798] installing Xen timer for CPU 4
[ 762.961942] cpu 4 spinlock event irq 154
[ 762.962002] installing Xen timer for CPU 5
[ 762.962143] cpu 5 spinlock event irq 161
[ 762.962203] installing Xen timer for CPU 6
[ 762.962311] cpu 6 spinlock event irq 168
[ 762.962371] installing Xen timer for CPU 7
[ 762.962472] cpu 7 spinlock event irq 175
[ 762.962479] x86: Booted up 1 node, 8 CPUs
[ 762.963049] devtmpfs: initialized
[ 762.963083] x86/mm: Memory block size: 128MB
[ 762.966304] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes)
[ 762.966307] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes)
[ 762.966357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 762.966373] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 762.966427] pinctrl core: initialized pinctrl subsystem
[ 762.966504] NET: Registered protocol family 16
[ 762.966510] xen:grant_table: Grant tables using version 1 layout
[ 762.966517] Grant table initialized
[ 762.966795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 762.966798] ACPI: bus type PCI registered
[ 762.966800] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 762.966926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 762.966930] PCI: not using MMCONFIG
[ 762.966931] PCI: Using configuration type 1 for base access
[ 762.977314] ACPI: Added _OSI(Module Device)
[ 762.977317] ACPI: Added _OSI(Processor Device)
[ 762.977319] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 762.977321] ACPI: Added _OSI(Processor Aggregator Device)
[ 762.977500] xen: registering gsi 9 triggering 0 polarity 0
[ 762.978750] ACPI: Executed 21 blocks of module-level executable AML code
[ 762.987204] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 762.989647] ACPI: Dynamic OEM Table Load:
[ 762.990492] ACPI: Dynamic OEM Table Load:
[ 762.990610] ACPI: SSDT 0xFFFF88083708F800 000750 (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
[ 762.990772] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 762.992397] ACPI: Dynamic OEM Table Load:
[ 762.992403] ACPI: SSDT 0xFFFF88083713FC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
[ 762.993122] ACPI: Dynamic OEM Table Load:
[ 762.993128] ACPI: SSDT 0xFFFF880836CB9800 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
[ 762.993479] ACPI: Dynamic OEM Table Load:
[ 762.993484] ACPI: SSDT 0xFFFF880837123600 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
[ 762.997740] ACPI: Interpreter enabled
[ 762.997769] ACPI: (supports S0 S5)
[ 762.997771] ACPI: Using IOAPIC for interrupt routing
[ 762.997802] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 763.000261] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 763.017796] HEST: Table parsing has been initialized.
[ 763.017799] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 763.018178] ACPI: Power Resource [PG00] (on)
[ 763.018436] ACPI: Power Resource [PG01] (on)
[ 763.018687] ACPI: Power Resource [PG02] (on)
[ 763.025644] ACPI: Power Resource [WRST] (off)
[ 763.025942] ACPI: Power Resource [WRST] (off)
[ 763.026249] ACPI: Power Resource [WRST] (off)
[ 763.026549] ACPI: Power Resource [WRST] (off)
[ 763.026848] ACPI: Power Resource [WRST] (off)
[ 763.027146] ACPI: Power Resource [WRST] (off)
[ 763.027442] ACPI: Power Resource [WRST] (off)
[ 763.027740] ACPI: Power Resource [WRST] (off)
[ 763.028037] ACPI: Power Resource [WRST] (off)
[ 763.028338] ACPI: Power Resource [WRST] (off)
[ 763.028657] ACPI: Power Resource [WRST] (off)
[ 763.028975] ACPI: Power Resource [WRST] (off)
[ 763.029275] ACPI: Power Resource [WRST] (off)
[ 763.029573] ACPI: Power Resource [WRST] (off)
[ 763.029872] ACPI: Power Resource [WRST] (off)
[ 763.030176] ACPI: Power Resource [WRST] (off)
[ 763.030480] ACPI: Power Resource [WRST] (off)
[ 763.030779] ACPI: Power Resource [WRST] (off)
[ 763.031079] ACPI: Power Resource [WRST] (off)
[ 763.031379] ACPI: Power Resource [WRST] (off)
[ 763.033439] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 763.036409] ACPI: Power Resource [FN00] (off)
[ 763.036478] ACPI: Power Resource [FN01] (off)
[ 763.036543] ACPI: Power Resource [FN02] (off)
[ 763.036610] ACPI: Power Resource [FN03] (off)
[ 763.036676] ACPI: Power Resource [FN04] (off)
[ 763.037556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 763.037562] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 763.040447] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 763.040450] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 763.042290] PCI host bridge to bus 0000:00
[ 763.042293] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 763.042295] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 763.042297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 763.042300] pci_bus 0000:00: root bus resource [mem 0x9e000000-0xdfffffff window]
[ 763.042302] pci_bus 0000:00: root bus resource [mem 0x880000000-0x8bfffffff window]
[ 763.042305] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 763.042308] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 763.042318] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000
[ 763.043251] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 763.043277] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit]
[ 763.043371] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 763.044062] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 763.044108] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 763.044133] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit]
[ 763.044903] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 763.044943] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit]
[ 763.045084] pci 0000:00:16.0: PME# supported from D3hot
[ 763.045776] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
[ 763.045820] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit]
[ 763.045991] pci 0000:00:16.1: PME# supported from D3hot
[ 763.046679] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 763.046699] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff]
[ 763.046709] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff]
[ 763.046720] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047]
[ 763.046730] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b]
[ 763.046740] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
[ 763.046750] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff]
[ 763.046808] pci 0000:00:17.0: PME# supported from D3hot
[ 763.047504] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
[ 763.047593] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 763.047609] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 763.048269] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 763.048312] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 763.048401] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 763.048416] pci 0000:00:1d.2: Intel SPT PCH root port ACS workaround enabled
[ 763.049078] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 763.049118] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 763.049207] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 763.049221] pci 0000:00:1d.3: Intel SPT PCH root port ACS workaround enabled
[ 763.049883] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 763.049937] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 763.050752] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 763.050765] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff]
[ 763.051498] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 763.051538] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit]
[ 763.051587] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f]
[ 763.052385] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
[ 763.052412] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref]
[ 763.052428] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff]
[ 763.052444] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff]
[ 763.052507] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 763.052656] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 763.062128] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 763.062136] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 763.062141] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 763.062229] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 763.062256] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff]
[ 763.062289] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
[ 763.062306] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff]
[ 763.062491] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 763.062603] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 763.074280] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 763.074287] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 763.074290] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 763.074402] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 763.074430] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff]
[ 763.074463] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 763.074479] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff]
[ 763.074672] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 763.074804] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 763.075189] random: fast init done
[ 763.086354] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 763.086361] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 763.086364] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 763.086717] xen: registering gsi 13 triggering 1 polarity 0
[ 763.087910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.087962] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 763.088013] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088166] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.088268] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 763.089097] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 763.089247] xen:balloon: Initialising balloon driver
[ 763.092807] xen_balloon: Initialising balloon driver
[ 763.092920] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 763.092924] vgaarb: loaded
[ 763.092926] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 763.092927] vgaarb: bridge control possible 0000:01:00.0
[ 763.092961] Registered efivars operations
[ 763.108835] PCI: Using ACPI for IRQ routing
[ 763.136858] PCI: pci_cache_line_size set to 64 bytes
[ 763.136953] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 763.136954] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 763.136954] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff]
[ 763.136955] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff]
[ 763.136955] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
[ 763.136956] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff]
[ 763.137106] clocksource: Switched to clocksource xen
[ 763.141102] VFS: Disk quotas dquot_6.6.0
[ 763.141131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 763.141144] hugetlbfs: disabling because there are no supported hugepage sizes
[ 763.141165] pnp: PnP ACPI init
[ 763.141261] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 763.141263] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 763.141266] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 763.141268] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 763.141270] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 763.141272] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 763.141274] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 763.141277] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141536] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 763.141539] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141639] system 00:02: [io 0x0680-0x069f] has been reserved
[ 763.141641] system 00:02: [io 0xffff] has been reserved
[ 763.141643] system 00:02: [io 0xffff] has been reserved
[ 763.141645] system 00:02: [io 0xffff] has been reserved
[ 763.141647] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 763.141649] system 00:02: [io 0x164e-0x164f] has been reserved
[ 763.141651] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141712] system 00:03: [io 0x0800-0x087f] has been reserved
[ 763.141714] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.141718] xen: registering gsi 8 triggering 1 polarity 0
[ 763.141757] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 763.141780] system 00:05: [io 0x1854-0x1857] has been reserved
[ 763.141783] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 763.142085] xen: registering gsi 4 triggering 1 polarity 0
[ 763.142146] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 763.143123] xen: registering gsi 14 triggering 0 polarity 1
[ 763.143169] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 763.143172] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 763.143174] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 763.143176] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.143614] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 763.143616] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 763.143618] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 763.143620] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 763.143622] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 763.143624] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 763.143626] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 763.143628] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 763.143631] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 763.143633] system 00:08: [mem 0x9e000000-0x9e01ffff] has been reserved
[ 763.143636] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 763.144376] pnp: PnP ACPI: found 9 devices
[ 763.149042] PM-Timer failed consistency check (0xffffff) - aborting.
[ 763.149045] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 763.149075] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref]
[ 763.149078] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 763.149084] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 763.149089] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 763.149096] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 763.149099] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 763.149110] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 763.149119] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 763.149122] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 763.149127] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 763.149137] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 763.149138] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 763.149138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 763.149139] pci_bus 0000:00: resource 7 [mem 0x9e000000-0xdfffffff window]
[ 763.149139] pci_bus 0000:00: resource 8 [mem 0x880000000-0x8bfffffff window]
[ 763.149140] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[ 763.149141] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff]
[ 763.149141] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref]
[ 763.149142] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 763.149143] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff]
[ 763.149143] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 763.149144] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff]
[ 763.149311] NET: Registered protocol family 2
[ 763.149577] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 763.149823] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 763.149896] TCP: Hash tables configured (established 262144 bind 65536)
[ 763.149943] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 763.150024] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 763.150096] NET: Registered protocol family 1
[ 763.150167] xen: registering gsi 16 triggering 0 polarity 1
[ 763.150179] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 763.150640] PCI: CLS 128 bytes, default 64
[ 763.150665] Unpacking initramfs...
[ 763.364442] Freeing initrd memory: 19932K
[ 763.364851] audit: initializing netlink subsys (disabled)
[ 763.364864] audit: type=2000 audit(1516697766.295:1): initialized
[ 763.365276] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 763.365613] zbud: loaded
[ 763.366224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 763.366258] io scheduler noop registered
[ 763.366260] io scheduler deadline registered
[ 763.366273] io scheduler cfq registered (default)
[ 763.366393] xen: registering gsi 17 triggering 0 polarity 1
[ 763.366406] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 763.366597] xen: registering gsi 18 triggering 0 polarity 1
[ 763.366604] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 763.366777] xen: registering gsi 19 triggering 0 polarity 1
[ 763.366783] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 763.366930] aer 0000:00:1d.0:pcie002: service driver aer loaded
[ 763.366951] aer 0000:00:1d.2:pcie002: service driver aer loaded
[ 763.366972] aer 0000:00:1d.3:pcie002: service driver aer loaded
[ 763.366982] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[ 763.366985] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 763.366989] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[ 763.366996] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[ 763.366998] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 763.367003] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[ 763.367010] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[ 763.367012] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 763.367016] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[ 763.367021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 763.367024] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 763.367033] efifb: probing for efifb
[ 763.367170] efifb: framebuffer at 0x9f000000, using 1876k, total 1875k
[ 763.367172] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 763.367174] efifb: scrolling: redraw
[ 763.367176] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 763.381045] Console: switching to colour frame buffer device 100x37
[ 763.394357] fb0: EFI VGA frame buffer device
[ 763.394534] intel_idle: MWAIT substates: 0x142120
[ 763.394535] intel_idle: v0.4.1 model 0x9E
[ 763.394537] intel_idle: intel_idle yielding to none
[ 763.394736] Monitor-Mwait will be used to enter C-1 state
[ 763.394738] Monitor-Mwait will be used to enter C-2 state
[ 763.395993] Warning: Processor Platform Limit not supported.
[ 763.396067] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 763.396351] pstore: using zlib compression
[ 763.396517] pstore: Registered erst as persistent store backend
[ 763.397010] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 763.397570] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 763.418840] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 763.419406] hpet_acpi_add: no address or irqs in _CRS
[ 763.419611] Linux agpgart interface v0.103
[ 763.419801] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 763.420028] AMD IOMMUv2 functionality not available on this system
[ 763.420775] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 764.389152] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d536927526, max_idle_ns: 881590452663 ns
[ 764.522218] i8042: No controller found
[ 764.529963] mousedev: PS/2 mouse device common for all mice
[ 764.537633] rtc_cmos 00:04: RTC can wake from S4
[ 764.545613] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 764.553296] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[ 764.560776] intel_pstate: Intel P-state driver initializing
[ 764.568495] ledtrig-cpu: registered to indicate activity on CPUs
[ 764.576699] NET: Registered protocol family 10
[ 764.584639] mip6: Mobile IPv6
[ 764.592166] NET: Registered protocol family 17
[ 764.599725] mpls_gso: MPLS GSO support
[ 764.607294] mce: Unable to init device /dev/mcelog (rc: -16)
[ 764.614949] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 764.622647] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 764.630541] registered taskstats version 1
[ 764.638128] zswap: loaded using pool lzo/zbud
[ 764.645942] ima: No TPM chip found, activating TPM-bypass!
[ 764.654341] rtc_cmos 00:04: setting system clock to 2018-01-23 08:56:08 UTC (1516697768)
[ 764.662104] PM: Hibernation image not present or could not be loaded.
[ 764.662431] Freeing unused kernel memory: 1408K
[ 764.670144] Write protecting the kernel read-only data: 12288k
[ 764.680069] Freeing unused kernel memory: 1980K
[ 764.688168] Freeing unused kernel memory: 1248K
[ 764.716113] x86/mm: Checked W+X mappings: FAILED, 4090 W+X pages found.
[ 764.787305] hidraw: raw HID events driver (C) Jiri Kosina
[ 764.802194] thermal LNXTHERM:00: registered as thermal_zone0
[ 764.809725] ACPI: Thermal Zone [TZ00] (28 C)
[ 764.817399] ACPI: bus type USB registered
[ 764.817462] pps_core: LinuxPPS API ver. 1 registered
[ 764.817462] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 764.834232] thermal LNXTHERM:01: registered as thermal_zone1
[ 764.834267] ACPI: Thermal Zone [TZ01] (30 C)
[ 764.861735] usbcore: registered new interface driver usbfs
[ 764.869045] usbcore: registered new interface driver hub
[ 764.876059] usbcore: registered new device driver usb
[ 764.883106] PTP clock support registered
[ 764.890310] dca service started, version 1.12.1
[ 764.890556] SCSI subsystem initialized
[ 764.904659] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 764.912332] xen: registering gsi 16 triggering 0 polarity 1
[ 764.912336] Already setup the GSI :16
[ 764.919372] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 764.919619] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 764.922383] libata version 3.00 loaded.
[ 764.926705] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 764.940394] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 764.948005] xen: registering gsi 18 triggering 0 polarity 1
[ 764.948008] Already setup the GSI :18
[ 764.956483] AVX2 version of gcm_enc/dec engaged.
[ 764.963562] AES CTR mode by8 optimization enabled
[ 764.969475] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
[ 764.979781] xen: registering gsi 16 triggering 0 polarity 1
[ 764.979785] Already setup the GSI :16
[ 764.986657] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 764.993563] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 765.001660] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 765.008643] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 765.008752] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 765.015680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 765.022613] usb usb1: Product: xHCI Host Controller
[ 765.029471] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 765.036484] usb usb1: SerialNumber: 0000:00:14.0
[ 765.043532] hub 1-0:1.0: USB hub found
[ 765.050353] hub 1-0:1.0: 16 ports detected
[ 765.057268] pps pps0: new PPS source ptp0
[ 765.063984] igb 0000:02:00.0: added PHC on eth0
[ 765.068621] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 765.068641] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 765.069827] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 765.069828] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 765.069829] usb usb2: Product: xHCI Host Controller
[ 765.069830] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 765.069830] usb usb2: SerialNumber: 0000:00:14.0
[ 765.071455] hub 2-0:1.0: USB hub found
[ 765.072090] hub 2-0:1.0: 10 ports detected
[ 765.130366] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 765.137066] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00
[ 765.143859] igb 0000:02:00.0: eth0: PBA No: 006200-000
[ 765.150511] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 765.157471] xen: registering gsi 19 triggering 0 polarity 1
[ 765.157475] Already setup the GSI :19
[ 765.157545] ahci 0000:00:17.0: version 3.0
[ 765.158345] xen: registering gsi 16 triggering 0 polarity 1
[ 765.158644] Already setup the GSI :16
[ 765.170859] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 765.177610] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 765.189807] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
[ 765.215067] pps pps1: new PPS source ptp1
[ 765.221979] igb 0000:03:00.0: added PHC on eth1
[ 765.228935] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 765.235990] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01
[ 765.243062] igb 0000:03:00.0: eth1: PBA No: 006200-000
[ 765.249935] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 765.257647] igb 0000:03:00.0 eno2: renamed from eth1
[ 765.264962] scsi host0: ahci
[ 765.271923] scsi host1: ahci
[ 765.278555] scsi host2: ahci
[ 765.285029] scsi host3: ahci
[ 765.286928] igb 0000:02:00.0 eno1: renamed from eth0
[ 765.309116] scsi host4: ahci
[ 765.325468] scsi host5: ahci
[ 765.331611] scsi host6: ahci
[ 765.337737] scsi host7: ahci
[ 765.341135] random: crng init done
[ 765.349533] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 189
[ 765.355673] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 189
[ 765.361706] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 189
[ 765.367516] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 189
[ 765.373217] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 189
[ 765.378817] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 189
[ 765.384234] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 189
[ 765.389528] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 189
[ 765.397145] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 765.413396] clocksource: Switched to clocksource tsc
[ 765.562744] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10
[ 765.568073] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 765.573456] usb 1-1: Product: Virtual Keyboard and Mouse
[ 765.578785] usb 1-1: Manufacturer: American Megatrends Inc.
[ 765.584021] usb 1-1: SerialNumber: serial
[ 765.591944] usbcore: registered new interface driver usbhid
[ 765.597165] usbhid: USB HID core driver
[ 765.602826] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
[ 765.613426] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
[ 765.624431] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
[ 765.636179] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
[ 765.705686] ata4: SATA link down (SStatus 0 SControl 300)
[ 765.711805] ata5: SATA link down (SStatus 0 SControl 300)
[ 765.717800] ata3: SATA link down (SStatus 0 SControl 300)
[ 765.723793] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 765.729935] ata6: SATA link down (SStatus 0 SControl 300)
[ 765.736191] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 765.742510] ata7: SATA link down (SStatus 0 SControl 300)
[ 765.748778] ata8: SATA link down (SStatus 0 SControl 300)
[ 765.758028] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 765.764459] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 765.774025] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 765.780933] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 765.789398] ata2.00: configured for UDMA/133
[ 765.799648] ata1.00: configured for UDMA/133
[ 765.806620] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 765.845669] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 765.887154] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 765.887161] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 765.887815] sd 1:0:0:0: [sdb] Write Protect is off
[ 765.887863] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 765.888184] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 765.924339] sd 0:0:0:0: [sda] Write Protect is off
[ 765.931731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 765.931737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 765.946722] sdb: sdb1 sdb2 sdb3 sdb4
[ 765.952495] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 766.008112] sda: sda1 sda2 sda3 sda4
[ 766.016031] sd 0:0:0:0: [sda] Attached SCSI disk
[ 766.210907] md: bind<sda2>
[ 766.311448] md: bind<sdb2>
[ 766.328967] md: bind<sdb4>
[ 766.336120] md: raid1 personality registered for level 1
[ 766.342745] md: bind<sda4>
[ 766.349417] md/raid1:md2: active with 2 out of 2 mirrors
[ 766.355689] md2: detected capacity change from 0 to 20970405888
[ 766.361954] md/raid1:md4: active with 2 out of 2 mirrors
[ 766.368135] created bitmap (29 pages) for device md4
[ 766.374665] md4: bitmap initialized from disk: read 2 pages, set 0 of 59234 bits
[ 766.415111] md4: detected capacity change from 0 to 3975079198720
[ 766.624772] device-mapper: uevent: version 1.0.3
[ 766.631300] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 768.394485] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 768.408438] e100: Copyright(c) 1999-2006 Intel Corporation
[ 768.417272] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 768.426183] sis900.c: v1.08.10 Apr. 2 2006
[ 768.434980] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 768.444015] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 768.452585] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 768.462425] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 768.469600] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 768.484133] sky2: driver version 1.30
[ 768.493176] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 768.509610] megasas: 06.811.02.00-rc1
[ 768.534223] md: raid0 personality registered for level 0
[ 768.609143] raid6: sse2x1 gen() 13457 MB/s
[ 768.681139] raid6: sse2x1 xor() 9313 MB/s
[ 768.753146] raid6: sse2x2 gen() 16509 MB/s
[ 768.825142] raid6: sse2x2 xor() 11603 MB/s
[ 768.897142] raid6: sse2x4 gen() 18277 MB/s
[ 768.969143] raid6: sse2x4 xor() 13299 MB/s
[ 769.041144] raid6: avx2x1 gen() 26605 MB/s
[ 769.113143] raid6: avx2x2 gen() 30556 MB/s
[ 769.185143] raid6: avx2x4 gen() 33636 MB/s
[ 769.191257] raid6: using algorithm avx2x4 gen() 33636 MB/s
[ 769.197425] raid6: using avx2x2 recovery algorithm
[ 769.204024] xor: automatically using best checksumming function avx
[ 769.210754] async_tx: api initialized (async)
[ 769.218492] md: raid6 personality registered for level 6
[ 769.224969] md: raid5 personality registered for level 5
[ 769.231334] md: raid4 personality registered for level 4
[ 769.241306] Fusion MPT base driver 3.04.20
[ 769.247438] Copyright (c) 1999-2008 LSI Corporation
[ 769.254350] Fusion MPT SPI Host driver 3.04.20
[ 769.262895] Fusion MPT SAS Host driver 3.04.20
[ 769.270567] Fusion MPT misc device (ioctl) driver 3.04.20
[ 769.276437] mptctl: Registered with Fusion MPT base driver
[ 769.282229] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 769.297543] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 769.303200] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 769.312665] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 769.320220] QLogic/NetXen Network Driver v4.0.82
[ 769.329587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 769.337067] uhci_hcd: USB Universal Host Controller Interface driver
[ 769.344602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 769.353288] md: linear personality registered for level -1
[ 769.360741] md: multipath personality registered for level -4
[ 769.375101] md: raid10 personality registered for level 10
[ 779.407715] Btrfs loaded, crc32c=crc32c-intel
[ 783.445176] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 784.095098] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 784.187574] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 784.209891] systemd[1]: Detected virtualization xen.
[ 784.217678] systemd[1]: Detected architecture x86-64.
[ 784.272577] systemd[1]: Set hostname to <y00>.
[ 784.597118] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked.
[ 784.613483] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 784.629970] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 784.646668] systemd[1]: Reached target Remote File Systems.
[ 784.663397] systemd[1]: Created slice User and Session Slice.
[ 784.680243] systemd[1]: Created slice System Slice.
[ 784.913924] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
[ 785.076194] systemd-journald[662]: Received request to flush runtime journal from PID 1
[ 785.523899] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 785.530673] ACPI: Sleep Button [SLPB]
[ 785.537321] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 785.544145] ACPI: Power Button [PWRF]
[ 785.670375] igb 0000:02:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 785.682287] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 785.692098] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 785.702016] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 785.787021] Bluetooth: Core ver 2.22
[ 785.794435] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 785.802078] NET: Registered protocol family 31
[ 785.809485] Bluetooth: HCI device and connection manager initialized
[ 785.816941] Bluetooth: HCI socket layer initialized
[ 785.816946] mei_me 0000:00:16.1: Device doesn't have valid ME Interface
[ 785.818187] acpi INT33D6:00: intel-vbtn: created platform device
[ 785.822949] input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input4
[ 785.846473] Bluetooth: L2CAP socket layer initialized
[ 785.854244] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[ 785.856465] Bluetooth: SCO socket layer initialized
[ 785.869838] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[ 785.878037] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[ 785.906199] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 785.914712] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 785.938259] EFI Variables Facility v0.08 2004-May-17
[ 785.964512] Bluetooth: HCI UART driver ver 2.3
[ 785.972393] Bluetooth: HCI UART protocol H4 registered
[ 785.980182] Bluetooth: HCI UART protocol BCSP registered
[ 785.988841] Bluetooth: HCI UART protocol LL registered
[ 785.996418] Bluetooth: HCI UART protocol ATH3K registered
[ 786.003850] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 786.011410] Bluetooth: HCI UART protocol Intel registered
[ 786.018820] Bluetooth: HCI UART protocol Broadcom registered
[ 786.026132] Bluetooth: HCI UART protocol QCA registered
[ 786.033424] Bluetooth: HCI UART protocol AG6XX registered
[ 786.040682] Bluetooth: HCI UART protocol Marvell registered
[ 786.047780] iTCO_vendor_support: vendor-support=0
[ 786.057244] [drm] Initialized
[ 786.073970] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 786.081932] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 786.088860] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 786.105863] checking generic (9f000000 1d5000) vs hw (9f000000 1000000)
[ 786.105864] fb: switching to mgag200drmfb from EFI VGA
[ 786.112578] Console: switching to colour dummy device 80x25
[ 786.112998] xen: registering gsi 17 triggering 0 polarity 1
[ 786.113002] Already setup the GSI :17
[ 786.124500] [TTM] Zone kernel: Available graphics memory: 15944712 kiB
[ 786.124504] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 786.124506] [TTM] Initializing pool allocator
[ 786.124510] [TTM] Initializing DMA pool allocator
[ 786.166827] fbcon: mgadrmfb (fb0) is primary device
[ 786.166871] Console: switching to colour frame buffer device 128x48
[ 786.439196] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device
[ 786.453161] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0
[ 786.562605] intel_rapl: Found RAPL domain package
[ 786.562606] intel_rapl: Found RAPL domain core
[ 786.562607] intel_rapl: Found RAPL domain dram
[ 786.657204] power_meter ACPI000D:00: Found ACPI power meter.
[ 786.657348] wmi: Mapper loaded
[ 786.682070] power_meter ACPI000D:00: Found ACPI power meter.
[ 786.682105] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 786.722732] Adding 4094972k swap on /dev/sdb3. Priority:-1 extents:1 across:4094972k FS
[ 787.814702] ppdev: user-space parallel port driver
[ 788.514095] Adding 4094972k swap on /dev/sda3. Priority:-2 extents:1 across:4094972k FS
[ 789.269231] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 789.272533] xen:xen_evtchn: Event-channel device installed
[ 789.275603] xenbr0: port 1(eno2) entered blocking state
[ 789.276005] xenbr0: port 1(eno2) entered disabled state
[ 789.276425] device eno2 entered promiscuous mode
[ 789.318506] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 789.321176] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 790.277175] xenbr0: port 1(eno2) entered blocking state
[ 790.277517] xenbr0: port 1(eno2) entered forwarding state
[ 790.278002] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[-- Attachment #5: efi-xen_xl-dmesg_8-cores.txt --]
[-- Type: text/plain, Size: 6621 bytes --]
(XEN) Xen version 4.8.3-pre (Debian 4.8.2+xsa245-0+deb9u1) (ijackson@chiark.greenend.org.uk) (gcc (Debian 6.3.0-18) 6.3.0 20170516) debug=n Sat Nov 25 11:30:34 UTC 2017
(XEN) Bootloader: EFI
(XEN) Command line:
(XEN) Video information:
(XEN) VGA is graphics mode 800x600, 32 bpp
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) EFI RAM map:
(XEN) 0000000000000000 - 0000000000058000 (usable)
(XEN) 0000000000058000 - 0000000000059000 (reserved)
(XEN) 0000000000059000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 000000000009f000 (reserved)
(XEN) 000000000009f000 - 00000000000a0000 (usable)
(XEN) 00000000000a0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000881c6000 (usable)
(XEN) 00000000881c6000 - 00000000881c7000 (ACPI NVS)
(XEN) 00000000881c7000 - 0000000088211000 (reserved)
(XEN) 0000000088211000 - 0000000088283000 (usable)
(XEN) 0000000088283000 - 0000000089ec2000 (reserved)
(XEN) 0000000089ec2000 - 0000000089f9a000 (ACPI NVS)
(XEN) 0000000089f9a000 - 0000000089fff000 (ACPI data)
(XEN) 0000000089fff000 - 000000008a000000 (usable)
(XEN) 000000008a000000 - 000000008c000000 (reserved)
(XEN) 0000000090000000 - 0000000096000000 (reserved)
(XEN) 0000000098000000 - 000000009e000000 (reserved)
(XEN) 00000000e00fa000 - 00000000e00fb000 (reserved)
(XEN) 00000000e00fd000 - 00000000e00fe000 (reserved)
(XEN) 00000000fe000000 - 00000000fe011000 (reserved)
(XEN) 0000000100000000 - 0000000862000000 (usable)
(XEN) ACPI: RSDP 89FFE014, 0024 (r2 INTEL )
(XEN) ACPI: XSDT 89FB7188, 00D4 (r1 INTEL S1200SPL 0 INTL 1000013)
(XEN) ACPI: FACP 89FF6000, 00F4 (r5 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: DSDT 89FC6000, 29241 (r2 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: FACS 89F7E000, 0040
(XEN) ACPI: HPET 89FF5000, 0038 (r1 INTEL S1200SPL 1 INTL 20091013)
(XEN) ACPI: APIC 89FF4000, 00BC (r3 INTEL S1200SPL 1 INTL 20091013)
(XEN) ACPI: MCFG 89FF3000, 003C (r1 INTEL S1200SPL 1 INTL 20091013)
(XEN) ACPI: SPMI 89FF1000, 0042 (r5 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: WDDT 89FF0000, 0040 (r1 INTEL S1200SPL 0 INTL 20091013)
(XEN) ACPI: SSDT 89FC3000, 2BAE (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: SSDT 89FC2000, 0BE3 (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: SSDT 89FC1000, 019A (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: SSDT 89FC0000, 04A3 (r2 INTEL S1200SPL 1000 INTL 20091013)
(XEN) ACPI: UEFI 89F93000, 0042 (r1 INTEL S1200SPL 2 INTL 1000013)
(XEN) ACPI: SSDT 89FBF000, 0E73 (r2 INTEL S1200SPL 3000 INTL 20141107)
(XEN) ACPI: SSDT 89FBD000, 0064 (r2 INTEL S1200SPL 2 INTL 20141107)
(XEN) ACPI: DMAR 89FBB000, 0070 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: HEST 89FBA000, 00A8 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: ERST 89FB8000, 0230 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: SSDT 89FF7000, 5328 (r2 INTEL S1200SPL 3000 INTL 20141107)
(XEN) ACPI: SSDT 89FBE000, 0B79 (r2 INTEL S1200SPL 2 INTL 20141107)
(XEN) ACPI: BERT 89FB9000, 0030 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: PRAD 89FBC000, 0102 (r2 INTEL S1200SPL 2 INTL 20141107)
(XEN) ACPI: EINJ 89FFD000, 0130 (r1 INTEL S1200SPL 1 INTL 1)
(XEN) ACPI: SPCR 89FF2000, 0050 (r1 INTEL S1200SPL 0 INTL 20091013)
(XEN) System RAM: 32417MB (33195868kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 89f7e000/0000000000000000, using 32
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) [VT-D] RMRR address range 3e2e0000..3e2fffff not in reserved memory; need "iommu_inclusive_mapping=1"?
(XEN) Not enabling x2APIC (upon firmware request)
(XEN) xstate: size: 0x440 and states: 0x1f
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 23.999MHz HPET
(XEN) Detected 3792.241 MHz processor.
(XEN) Initing memory sharing.
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Posted Interrupt not enabled.
(XEN) Intel VT-d Shared EPT tables enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer appears to have unexpectedly wrapped 4 times.
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 8 CPUs
(XEN) Dom0 has maximum 888 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1f63000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000846000000->0000000848000000 (8142075 pages to be allocated)
(XEN) Init. ramdisk: 0000000860c89000->0000000861fff458
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81f63000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008003e38390
(XEN) Start info: ffffffff81f63000->ffffffff81f634b4
(XEN) Page tables: ffffffff81f64000->ffffffff81f77000
(XEN) Boot stack: ffffffff81f77000->ffffffff81f78000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff81d3d180
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) ....................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 2048kB init memory
[-- Attachment #6: grub.cfg --]
[-- Type: text/plain, Size: 19793 bytes --]
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="Debian GNU/Linux, with Xen hypervisor"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/08_linux_xen ###
menuentry 'Debian GNU/Linux, avec hyperviseur Xen' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-simple-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.gz placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-5-amd64…'
module /boot/vmlinuz-4.9.0-5-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-5-amd64
}
submenu 'Option avancée pour Debian GNU/Linux (avec hyperviseur Xen)' $menuentry_id_option 'gnulinux-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
submenu 'Hyperviseur Xen, version 4.8-amd64' $menuentry_id_option 'xen-hypervisor-4.8-amd64-6b557f74-6879-455d-9e61-389ac0ed0b90' {
menuentry 'Debian GNU/Linux, avec Xen 4.8-amd64 et Linux 4.9.0-5-amd64' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-5-amd64-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.gz placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-5-amd64…'
module /boot/vmlinuz-4.9.0-5-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-5-amd64
}
menuentry 'Debian GNU/Linux, with Xen 4.8-amd64 and Linux 4.9.0-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-5-amd64-recovery-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.gz placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-5-amd64…'
module /boot/vmlinuz-4.9.0-5-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro single rootdelay=10 rootdelay=10
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-5-amd64
}
menuentry 'Debian GNU/Linux, avec Xen 4.8-amd64 et Linux 4.9.0-4-amd64' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-4-amd64-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.gz placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-4-amd64…'
module /boot/vmlinuz-4.9.0-4-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-4-amd64
}
menuentry 'Debian GNU/Linux, with Xen 4.8-amd64 and Linux 4.9.0-4-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-4-amd64-recovery-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.gz placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-4-amd64…'
module /boot/vmlinuz-4.9.0-4-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro single rootdelay=10 rootdelay=10
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-4-amd64
}
}
submenu 'Hyperviseur Xen, version 4.8-amd64.efi' $menuentry_id_option 'xen-hypervisor-4.8-amd64.efi-6b557f74-6879-455d-9e61-389ac0ed0b90' {
menuentry 'Debian GNU/Linux, avec Xen 4.8-amd64.efi et Linux 4.9.0-5-amd64' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-5-amd64-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64.efi…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.efi placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-5-amd64…'
module /boot/vmlinuz-4.9.0-5-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-5-amd64
}
menuentry 'Debian GNU/Linux, with Xen 4.8-amd64.efi and Linux 4.9.0-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-5-amd64-recovery-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64.efi…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.efi placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-5-amd64…'
module /boot/vmlinuz-4.9.0-5-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro single rootdelay=10 rootdelay=10
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-5-amd64
}
menuentry 'Debian GNU/Linux, avec Xen 4.8-amd64.efi et Linux 4.9.0-4-amd64' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-4-amd64-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64.efi…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.efi placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-4-amd64…'
module /boot/vmlinuz-4.9.0-4-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-4-amd64
}
menuentry 'Debian GNU/Linux, with Xen 4.8-amd64.efi and Linux 4.9.0-4-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os --class xen $menuentry_id_option 'xen-gnulinux-4.9.0-4-amd64-recovery-6b557f74-6879-455d-9e61-389ac0ed0b90' {
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Xen 4.8-amd64.efi…'
if [ "$grub_platform" = "pc" -o "$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
multiboot /boot/xen-4.8-amd64.efi placeholder ${xen_rm_opts}
echo 'Chargement de Linux 4.9.0-4-amd64…'
module /boot/vmlinuz-4.9.0-4-amd64 placeholder root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro single rootdelay=10 rootdelay=10
echo 'Chargement du disque mémoire initial…'
module --nounzip /boot/initrd.img-4.9.0-4-amd64
}
}
}
### END /etc/grub.d/08_linux_xen ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6b557f74-6879-455d-9e61-389ac0ed0b90' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Linux 4.9.0-5-amd64…'
linux /boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.9.0-5-amd64
}
submenu 'Options avancées pour Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
menuentry 'Debian GNU/Linux, avec Linux 4.9.0-5-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.9.0-5-amd64-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Linux 4.9.0-5-amd64…'
linux /boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.9.0-5-amd64
}
menuentry 'Debian GNU/Linux, with Linux 4.9.0-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.9.0-5-amd64-recovery-6b557f74-6879-455d-9e61-389ac0ed0b90' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Linux 4.9.0-5-amd64…'
linux /boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro single rootdelay=10 rootdelay=10
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.9.0-5-amd64
}
menuentry 'Debian GNU/Linux, avec Linux 4.9.0-4-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.9.0-4-amd64-advanced-6b557f74-6879-455d-9e61-389ac0ed0b90' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Linux 4.9.0-4-amd64…'
linux /boot/vmlinuz-4.9.0-4-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.9.0-4-amd64
}
menuentry 'Debian GNU/Linux, with Linux 4.9.0-4-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.9.0-4-amd64-recovery-6b557f74-6879-455d-9e61-389ac0ed0b90' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod diskfilter
insmod mdraid09
insmod ext2
set root='mduuid/b2e9264fb2173ff6a4d2adc226fd5302'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='mduuid/b2e9264fb2173ff6a4d2adc226fd5302' 6b557f74-6879-455d-9e61-389ac0ed0b90
else
search --no-floppy --fs-uuid --set=root 6b557f74-6879-455d-9e61-389ac0ed0b90
fi
echo 'Chargement de Linux 4.9.0-4-amd64…'
linux /boot/vmlinuz-4.9.0-4-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro single rootdelay=10 rootdelay=10
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.9.0-4-amd64
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
[-- Attachment #7: efi-debian_dmesg_8-cores.txt --]
[-- Type: text/plain, Size: 55889 bytes --]
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000881c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000881c6000-0x00000000881c6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000881c7000-0x0000000088210fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000088211000-0x0000000088282fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088283000-0x0000000088302fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000088303000-0x0000000089ec1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000089ec2000-0x0000000089f99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000089f9a000-0x0000000089ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000089fff000-0x0000000089ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a000000-0x000000008bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000090000000-0x0000000095ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000098000000-0x000000009dffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00fa000-0x00000000e00fafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00fd000-0x00000000e00fdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000861ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by EDK II BIOS ID:S1200SP.86B.03.01.0026.092720170729
[ 0.000000] efi: SMBIOS=0x88633000 ACPI=0x89ffe000 ACPI 2.0=0x89ffe014 PROP=0x86bb5af0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0026.092720170729 09/27/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x862000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0880000000 mask 7FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x8a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff94b8c0094000] 94000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x682d37000, 0x682d37fff] PGTABLE
[ 0.000000] BRK [0x682d38000, 0x682d38fff] PGTABLE
[ 0.000000] BRK [0x682d39000, 0x682d39fff] PGTABLE
[ 0.000000] BRK [0x682d3a000, 0x682d3afff] PGTABLE
[ 0.000000] BRK [0x682d3b000, 0x682d3bfff] PGTABLE
[ 0.000000] BRK [0x682d3c000, 0x682d3cfff] PGTABLE
[ 0.000000] BRK [0x682d3d000, 0x682d3dfff] PGTABLE
[ 0.000000] BRK [0x682d3e000, 0x682d3efff] PGTABLE
[ 0.000000] BRK [0x682d3f000, 0x682d3ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x358d1000-0x36c5ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000089FFE014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x0000000089FB7188 0000D4 (v01 INTEL S1200SPL 00000000 INTL 01000013)
[ 0.000000] ACPI: FACP 0x0000000089FF6000 0000F4 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: DSDT 0x0000000089FC6000 029241 (v02 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: FACS 0x0000000089F7E000 000040
[ 0.000000] ACPI: HPET 0x0000000089FF5000 000038 (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: APIC 0x0000000089FF4000 0000BC (v03 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: MCFG 0x0000000089FF3000 00003C (v01 INTEL S1200SPL 00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x0000000089FF1000 000042 (v05 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x0000000089FF0000 000040 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC3000 002BAE (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC2000 000BE3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC1000 00019A (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x0000000089FC0000 0004A3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
[ 0.000000] ACPI: UEFI 0x0000000089F93000 000042 (v01 INTEL S1200SPL 00000002 INTL 01000013)
[ 0.000000] ACPI: SSDT 0x0000000089FBF000 000E73 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBD000 000064 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: DMAR 0x0000000089FBB000 000070 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: HEST 0x0000000089FBA000 0000A8 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x0000000089FB8000 000230 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x0000000089FF7000 005328 (v02 INTEL S1200SPL 00003000 INTL 20141107)
[ 0.000000] ACPI: SSDT 0x0000000089FBE000 000B79 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: BERT 0x0000000089FB9000 000030 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: PRAD 0x0000000089FBC000 000102 (v02 INTEL S1200SPL 00000002 INTL 20141107)
[ 0.000000] ACPI: EINJ 0x0000000089FFD000 000130 (v01 INTEL S1200SPL 00000001 INTL 00000001)
[ 0.000000] ACPI: SPCR 0x0000000089FF2000 000050 (v01 INTEL S1200SPL 00000000 INTL 20091013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000861ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x861ffb000-0x861ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000881c5fff]
[ 0.000000] node 0: [mem 0x0000000088211000-0x0000000088282fff]
[ 0.000000] node 0: [mem 0x0000000089fff000-0x0000000089ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000861ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000861ffffff]
[ 0.000000] On node 0 totalpages: 8298966
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1089 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8649 pages used for memmap
[ 0.000000] DMA32 zone: 553529 pages, LIFO batch:31
[ 0.000000] Normal zone: 120960 pages used for memmap
[ 0.000000] Normal zone: 7741440 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c6000-0x881c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x881c7000-0x88210fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88283000-0x88302fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88303000-0x89ec1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89ec2000-0x89f99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89f9a000-0x89ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a000000-0x8bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x95ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96000000-0x97ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x9dffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0xe00f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fa000-0xe00fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fb000-0xe00fcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fd000-0xe00fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00fe000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[ 0.000000] e820: [mem 0x9e000000-0xe00f9fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff94c121c00000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8168204
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6b557f74-6879-455d-9e61-389ac0ed0b90 ro rootdelay=10 rootdelay=10 noquiet nosplash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32493876K/33195864K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 701988K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:2048 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 3800.000 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 7584.00 BogoMIPS (lpj=15168000)
[ 0.000020] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20160831
[ 0.023259] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.023659] Security Framework initialized
[ 0.023661] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.023666] AppArmor: AppArmor disabled by boot time parameter
[ 0.024617] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.028007] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.029506] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.029523] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.029723] CPU: Physical Processor ID: 0
[ 0.029725] CPU: Processor Core ID: 0
[ 0.029729] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.029731] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.029735] mce: CPU supports 10 MCE banks
[ 0.029743] CPU0: Thermal monitoring enabled (TM1)
[ 0.029757] process: using mwait in idle threads
[ 0.029760] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.029762] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.030012] Freeing SMP alternatives memory: 24K
[ 0.054985] ftrace: allocating 25212 entries in 99 pages
[ 0.061460] smpboot: Max logical packages: 2
[ 0.061467] DMAR: Host address width 39
[ 0.061469] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.061474] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.061476] DMAR: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
[ 0.061479] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.061481] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.061482] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.061484] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.062746] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.062748] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.066771] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.106461] TSC deadline timer enabled
[ 0.106466] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.106471] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.106493] ... version: 4
[ 0.106495] ... bit width: 48
[ 0.106496] ... generic registers: 4
[ 0.106498] ... value mask: 0000ffffffffffff
[ 0.106499] ... max period: 00007fffffffffff
[ 0.106501] ... fixed-purpose events: 3
[ 0.106502] ... event mask: 000000070000000f
[ 0.106874] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.106931] x86: Booting SMP configuration:
[ 0.106933] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.124437] x86: Booted up 1 node, 8 CPUs
[ 0.124442] smpboot: Total of 8 processors activated (60672.00 BogoMIPS)
[ 0.130546] devtmpfs: initialized
[ 0.130585] x86/mm: Memory block size: 128MB
[ 0.133720] PM: Registering ACPI NVS region [mem 0x881c6000-0x881c6fff] (4096 bytes)
[ 0.133723] PM: Registering ACPI NVS region [mem 0x89ec2000-0x89f99fff] (884736 bytes)
[ 0.133767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.133777] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.133813] pinctrl core: initialized pinctrl subsystem
[ 0.134579] NET: Registered protocol family 16
[ 0.150100] cpuidle: using governor ladder
[ 0.166111] cpuidle: using governor menu
[ 0.166161] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.166164] ACPI: bus type PCI registered
[ 0.166166] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.166220] PCI: not using MMCONFIG
[ 0.166221] PCI: Using configuration type 1 for base access
[ 0.182210] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.182213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.182353] ACPI: Added _OSI(Module Device)
[ 0.182356] ACPI: Added _OSI(Processor Device)
[ 0.182358] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.182360] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183282] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.189297] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.190907] ACPI: Dynamic OEM Table Load:
[ 0.191433] ACPI: Dynamic OEM Table Load:
[ 0.191459] ACPI: SSDT 0xFFFF94C0FD403800 000750 (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
[ 0.191600] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.192779] ACPI: Dynamic OEM Table Load:
[ 0.192785] ACPI: SSDT 0xFFFF94C0FD400000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
[ 0.193277] ACPI: Dynamic OEM Table Load:
[ 0.193283] ACPI: SSDT 0xFFFF94C0FD403000 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
[ 0.193587] ACPI: Dynamic OEM Table Load:
[ 0.193592] ACPI: SSDT 0xFFFF94C0FD409800 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
[ 0.196838] ACPI: Interpreter enabled
[ 0.196865] ACPI: (supports S0 S5)
[ 0.196867] ACPI: Using IOAPIC for interrupt routing
[ 0.196891] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.198627] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.198654] HEST: Table parsing has been initialized.
[ 0.198657] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199022] ACPI: Power Resource [PG00] (on)
[ 0.199240] ACPI: Power Resource [PG01] (on)
[ 0.199449] ACPI: Power Resource [PG02] (on)
[ 0.205272] ACPI: Power Resource [WRST] (off)
[ 0.205517] ACPI: Power Resource [WRST] (off)
[ 0.205762] ACPI: Power Resource [WRST] (off)
[ 0.206006] ACPI: Power Resource [WRST] (off)
[ 0.206249] ACPI: Power Resource [WRST] (off)
[ 0.206495] ACPI: Power Resource [WRST] (off)
[ 0.206740] ACPI: Power Resource [WRST] (off)
[ 0.206983] ACPI: Power Resource [WRST] (off)
[ 0.207226] ACPI: Power Resource [WRST] (off)
[ 0.207472] ACPI: Power Resource [WRST] (off)
[ 0.207728] ACPI: Power Resource [WRST] (off)
[ 0.207983] ACPI: Power Resource [WRST] (off)
[ 0.208227] ACPI: Power Resource [WRST] (off)
[ 0.208470] ACPI: Power Resource [WRST] (off)
[ 0.208714] ACPI: Power Resource [WRST] (off)
[ 0.208957] ACPI: Power Resource [WRST] (off)
[ 0.209201] ACPI: Power Resource [WRST] (off)
[ 0.209444] ACPI: Power Resource [WRST] (off)
[ 0.209688] ACPI: Power Resource [WRST] (off)
[ 0.209931] ACPI: Power Resource [WRST] (off)
[ 0.211727] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 0.214084] ACPI: Power Resource [FN00] (off)
[ 0.214142] ACPI: Power Resource [FN01] (off)
[ 0.214197] ACPI: Power Resource [FN02] (off)
[ 0.214253] ACPI: Power Resource [FN03] (off)
[ 0.214312] ACPI: Power Resource [FN04] (off)
[ 0.214956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.214961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.216926] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.216928] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.218254] PCI host bridge to bus 0000:00
[ 0.218257] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.218259] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.218261] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.218264] pci_bus 0000:00: root bus resource [mem 0x9e000000-0xdfffffff window]
[ 0.218267] pci_bus 0000:00: root bus resource [mem 0x880000000-0x8bfffffff window]
[ 0.218269] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.218272] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.218278] pci 0000:00:00.0: [8086:5918] type 00 class 0x060000
[ 0.218976] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.218991] pci 0000:00:14.0: reg 0x10: [mem 0xa0d00000-0xa0d0ffff 64bit]
[ 0.219044] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.219569] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.219597] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.219610] pci 0000:00:14.2: reg 0x10: [mem 0x8bff01000-0x8bff01fff 64bit]
[ 0.220171] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.220200] pci 0000:00:16.0: reg 0x10: [mem 0xa0d17000-0xa0d17fff 64bit]
[ 0.220306] pci 0000:00:16.0: PME# supported from D3hot
[ 0.220830] pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
[ 0.220863] pci 0000:00:16.1: reg 0x10: [mem 0xa0d16000-0xa0d16fff 64bit]
[ 0.220987] pci 0000:00:16.1: PME# supported from D3hot
[ 0.221504] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.221515] pci 0000:00:17.0: reg 0x10: [mem 0xa0d14000-0xa0d15fff]
[ 0.221520] pci 0000:00:17.0: reg 0x14: [mem 0xa0d19000-0xa0d190ff]
[ 0.221526] pci 0000:00:17.0: reg 0x18: [io 0x5040-0x5047]
[ 0.221531] pci 0000:00:17.0: reg 0x1c: [io 0x5048-0x504b]
[ 0.221536] pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
[ 0.221542] pci 0000:00:17.0: reg 0x24: [mem 0xa0d18000-0xa0d187ff]
[ 0.221572] pci 0000:00:17.0: PME# supported from D3hot
[ 0.222097] pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
[ 0.222143] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.222656] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.222682] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[ 0.222727] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[ 0.223236] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.223258] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[ 0.223304] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 0.223811] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.223850] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 0.224447] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.224455] pci 0000:00:1f.2: reg 0x10: [mem 0xa0d10000-0xa0d13fff]
[ 0.225003] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.225042] pci 0000:00:1f.4: reg 0x10: [mem 0x8bff00000-0x8bff000ff 64bit]
[ 0.225092] pci 0000:00:1f.4: reg 0x20: [io 0x5000-0x501f]
[ 0.225698] pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
[ 0.225718] pci 0000:01:00.0: reg 0x10: [mem 0x9f000000-0x9fffffff pref]
[ 0.225729] pci 0000:01:00.0: reg 0x14: [mem 0xa0800000-0xa0803fff]
[ 0.225741] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff]
[ 0.225786] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.225893] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.234339] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.234343] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 0.234346] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 0.234403] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 0.234423] pci 0000:02:00.0: reg 0x10: [mem 0xa0b00000-0xa0bfffff]
[ 0.234446] pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
[ 0.234457] pci 0000:02:00.0: reg 0x1c: [mem 0xa0c00000-0xa0c03fff]
[ 0.234571] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.234640] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.246363] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 0.246366] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 0.246368] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 0.246426] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 0.246445] pci 0000:03:00.0: reg 0x10: [mem 0xa0900000-0xa09fffff]
[ 0.246468] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.246480] pci 0000:03:00.0: reg 0x1c: [mem 0xa0a00000-0xa0a03fff]
[ 0.246593] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.246663] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.258364] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 0.258367] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 0.258368] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 0.259445] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259481] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.259516] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259550] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259585] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.259688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.260282] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.260419] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.260422] vgaarb: loaded
[ 0.260424] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.260426] vgaarb: bridge control possible 0000:01:00.0
[ 0.260448] Registered efivars operations
[ 0.276290] PCI: Using ACPI for IRQ routing
[ 0.304314] PCI: pci_cache_line_size set to 64 bytes
[ 0.304387] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.304387] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.304388] e820: reserve RAM buffer [mem 0x881c6000-0x8bffffff]
[ 0.304388] e820: reserve RAM buffer [mem 0x88283000-0x8bffffff]
[ 0.304389] e820: reserve RAM buffer [mem 0x8a000000-0x8bffffff]
[ 0.304390] e820: reserve RAM buffer [mem 0x862000000-0x863ffffff]
[ 0.304512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.304516] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.306557] clocksource: Switched to clocksource hpet
[ 0.310416] VFS: Disk quotas dquot_6.6.0
[ 0.310432] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.310477] pnp: PnP ACPI init
[ 0.310554] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.310574] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.310576] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.310579] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.310581] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.310583] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.310585] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.310587] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310767] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.310770] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310855] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.310858] system 00:02: [io 0xffff] has been reserved
[ 0.310859] system 00:02: [io 0xffff] has been reserved
[ 0.310861] system 00:02: [io 0xffff] has been reserved
[ 0.310863] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.310865] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.310867] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310920] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.310922] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310935] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.310957] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.310959] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.311199] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.311902] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.311904] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.311906] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.311909] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312228] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.312230] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.312232] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.312234] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.312236] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.312238] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.312240] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.312242] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.312244] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.312246] system 00:08: [mem 0x9e000000-0x9e01ffff] has been reserved
[ 0.312248] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312802] pnp: PnP ACPI: found 9 devices
[ 0.319229] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.319233] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.319250] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0810000-0xa081ffff pref]
[ 0.319253] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.319256] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa08fffff]
[ 0.319259] pci 0000:00:1d.0: bridge window [mem 0x9f000000-0x9fffffff 64bit pref]
[ 0.319264] pci 0000:00:1d.2: PCI bridge to [bus 02]
[ 0.319267] pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
[ 0.319270] pci 0000:00:1d.2: bridge window [mem 0xa0b00000-0xa0cfffff]
[ 0.319275] pci 0000:00:1d.3: PCI bridge to [bus 03]
[ 0.319278] pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
[ 0.319281] pci 0000:00:1d.3: bridge window [mem 0xa0900000-0xa0afffff]
[ 0.319287] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.319287] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.319288] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.319289] pci_bus 0000:00: resource 7 [mem 0x9e000000-0xdfffffff window]
[ 0.319289] pci_bus 0000:00: resource 8 [mem 0x880000000-0x8bfffffff window]
[ 0.319290] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
[ 0.319290] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa08fffff]
[ 0.319291] pci_bus 0000:01: resource 2 [mem 0x9f000000-0x9fffffff 64bit pref]
[ 0.319291] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.319292] pci_bus 0000:02: resource 1 [mem 0xa0b00000-0xa0cfffff]
[ 0.319293] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.319293] pci_bus 0000:03: resource 1 [mem 0xa0900000-0xa0afffff]
[ 0.319421] NET: Registered protocol family 2
[ 0.319557] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.319750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.319818] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.319837] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.319885] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.319952] NET: Registered protocol family 1
[ 0.320421] PCI: CLS 128 bytes, default 64
[ 0.320444] Unpacking initramfs...
[ 0.533661] Freeing initrd memory: 20028K
[ 0.533699] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.533704] software IO TLB [mem 0x7fbd3000-0x83bd3000] (64MB) mapped at [ffff94b93fbd3000-ffff94b943bd2fff]
[ 0.533951] audit: initializing netlink subsys (disabled)
[ 0.533964] audit: type=2000 audit(1516644024.500:1): initialized
[ 0.534266] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.534372] zbud: loaded
[ 0.535087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.535131] io scheduler noop registered
[ 0.535134] io scheduler deadline registered
[ 0.535147] io scheduler cfq registered (default)
[ 0.535577] aer 0000:00:1d.0:pcie002: service driver aer loaded
[ 0.535589] aer 0000:00:1d.2:pcie002: service driver aer loaded
[ 0.535600] aer 0000:00:1d.3:pcie002: service driver aer loaded
[ 0.535609] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[ 0.535611] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.535614] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[ 0.535619] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[ 0.535621] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.535624] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[ 0.535628] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[ 0.535630] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.535633] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[ 0.535637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.535641] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.535650] efifb: probing for efifb
[ 0.535658] efifb: framebuffer at 0x9f000000, using 3072k, total 3072k
[ 0.535660] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.535661] efifb: scrolling: redraw
[ 0.535663] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.558084] Console: switching to colour frame buffer device 128x48
[ 0.579791] fb0: EFI VGA frame buffer device
[ 0.579968] intel_idle: MWAIT substates: 0x142120
[ 0.579969] intel_idle: v0.4.1 model 0x9E
[ 0.580170] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.580453] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.580736] pstore: using zlib compression
[ 0.580904] pstore: Registered erst as persistent store backend
[ 0.581373] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 0.581697] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.602894] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.603658] Linux agpgart interface v0.103
[ 0.603845] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.604071] AMD IOMMUv2 functionality not available on this system
[ 0.604814] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.562638] tsc: Refined TSC clocksource calibration: 3791.982 MHz
[ 1.562892] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5184cc4c3, max_idle_ns: 881590856055 ns
[ 1.683909] i8042: No controller found
[ 1.684158] mousedev: PS/2 mouse device common for all mice
[ 1.684388] rtc_cmos 00:04: RTC can wake from S4
[ 1.684958] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.685280] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.685571] intel_pstate: Intel P-state driver initializing
[ 1.685831] intel_pstate: Disabling energy efficiency optimization
[ 1.686719] intel_pstate: HWP enabled
[ 1.687161] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.687803] NET: Registered protocol family 10
[ 1.699594] mip6: Mobile IPv6
[ 1.709394] NET: Registered protocol family 17
[ 1.719174] mpls_gso: MPLS GSO support
[ 1.729089] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 1.739009] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.749200] registered taskstats version 1
[ 1.759068] zswap: loaded using pool lzo/zbud
[ 1.768927] ima: No TPM chip found, activating TPM-bypass!
[ 1.779413] rtc_cmos 00:04: setting system clock to 2018-01-22 18:00:26 UTC (1516644026)
[ 1.789707] PM: Hibernation image not present or could not be loaded.
[ 1.790347] Freeing unused kernel memory: 1408K
[ 1.800495] Write protecting the kernel read-only data: 12288k
[ 1.811026] Freeing unused kernel memory: 1980K
[ 1.822372] Freeing unused kernel memory: 1248K
[ 1.834742] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.872950] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.883055] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.890908] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.891884] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.913021] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.915002] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.915103] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.915342] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.916088] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.916258] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.986026] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.008818] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.017420] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.027075] ACPI: bus type USB registered
[ 2.035456] usbcore: registered new interface driver usbfs
[ 2.037012] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.037013] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.060401] usbcore: registered new interface driver hub
[ 2.068733] usbcore: registered new device driver usb
[ 2.077032] pps_core: LinuxPPS API ver. 1 registered
[ 2.077925] SCSI subsystem initialized
[ 2.093129] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.101328] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 2.109425] PTP clock support registered
[ 2.109546] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.110959] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.133869] dca service started, version 1.12.1
[ 2.136060] libata version 3.00 loaded.
[ 2.142919] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 2.147130] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.147134] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.167142] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.170492] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 2.170864] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 2.175178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.175179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.175180] usb usb1: Product: xHCI Host Controller
[ 2.175180] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 2.175181] usb usb1: SerialNumber: 0000:00:14.0
[ 2.178827] hub 1-0:1.0: USB hub found
[ 2.179758] hub 1-0:1.0: 16 ports detected
[ 2.195304] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.195306] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.197044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.197048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.197070] usb usb2: Product: xHCI Host Controller
[ 2.197083] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd
[ 2.197091] usb usb2: SerialNumber: 0000:00:14.0
[ 2.200412] hub 2-0:1.0: USB hub found
[ 2.200869] hub 2-0:1.0: 10 ports detected
[ 2.245542] AVX2 version of gcm_enc/dec engaged.
[ 2.245550] AES CTR mode by8 optimization enabled
[ 2.328641] ahci 0000:00:17.0: version 3.0
[ 2.329041] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 2.337253] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 2.337511] igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
[ 2.372727] pps pps0: new PPS source ptp0
[ 2.381443] igb 0000:02:00.0: added PHC on eth0
[ 2.390310] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.399424] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:00
[ 2.408728] igb 0000:02:00.0: eth0: PBA No: 006200-000
[ 2.417873] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.427723] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
[ 2.437097] scsi host0: ahci
[ 2.446493] scsi host1: ahci
[ 2.455726] scsi host2: ahci
[ 2.464780] scsi host3: ahci
[ 2.473637] scsi host4: ahci
[ 2.482462] scsi host5: ahci
[ 2.491238] scsi host6: ahci
[ 2.499827] scsi host7: ahci
[ 2.508196] ata1: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18100 irq 125
[ 2.516572] pps pps1: new PPS source ptp1
[ 2.516625] ata2: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18180 irq 125
[ 2.516717] ata3: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18200 irq 125
[ 2.516771] ata4: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18280 irq 125
[ 2.516837] ata5: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18300 irq 125
[ 2.516902] ata6: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18380 irq 125
[ 2.517004] ata7: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18400 irq 125
[ 2.517072] ata8: SATA max UDMA/133 abar m2048@0xa0d18000 port 0xa0d18480 irq 125
[ 2.551161] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 2.588262] clocksource: Switched to clocksource tsc
[ 2.588263] igb 0000:03:00.0: added PHC on eth1
[ 2.588264] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.588265] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:1f:a0:01
[ 2.590334] igb 0000:03:00.0: eth1: PBA No: 006200-000
[ 2.590337] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.619595] igb 0000:03:00.0 eno2: renamed from eth1
[ 2.674743] igb 0000:02:00.0 eno1: renamed from eth0
[ 2.712162] usb 1-1: New USB device found, idVendor=046b, idProduct=ff10
[ 2.719434] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.726691] usb 1-1: Product: Virtual Keyboard and Mouse
[ 2.733873] usb 1-1: Manufacturer: American Megatrends Inc.
[ 2.741068] usb 1-1: SerialNumber: serial
[ 2.750581] usbcore: registered new interface driver usbhid
[ 2.757731] usbhid: USB HID core driver
[ 2.765174] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
[ 2.780620] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
[ 2.797234] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
[ 2.814708] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
[ 2.832892] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.842029] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.850988] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.860393] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.872162] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.881225] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.889764] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.898047] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.907057] ata1.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 2.915509] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.924200] ata2.00: ATA-9: HGST HUS726040ALA610, A5GNT920, max UDMA/133
[ 2.933024] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.947797] ata1.00: configured for UDMA/133
[ 2.957200] scsi 0:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 2.957790] ata2.00: configured for UDMA/133
[ 3.007025] scsi 1:0:0:0: Direct-Access ATA HGST HUS726040AL T920 PQ: 0 ANSI: 5
[ 3.057330] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 3.058029] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 3.062739] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.062742] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.063684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.095507] sd 0:0:0:0: [sda] Write Protect is off
[ 3.105321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.105328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116168] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.126647] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.164611] sda: sda1 sda2 sda3 sda4
[ 3.175148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.375353] md: bind<sda4>
[ 3.435301] md: bind<sda2>
[ 3.451808] md: bind<sdb2>
[ 3.472088] md: raid1 personality registered for level 1
[ 3.481982] md: bind<sdb4>
[ 3.491929] md/raid1:md2: active with 2 out of 2 mirrors
[ 3.501944] md2: detected capacity change from 0 to 20970405888
[ 3.505117] md/raid1:md4: active with 2 out of 2 mirrors
[ 3.506133] created bitmap (29 pages) for device md4
[ 3.508624] md4: bitmap initialized from disk: read 2 pages, set 4 of 59234 bits
[ 3.534160] md4: detected capacity change from 0 to 3975079198720
[ 3.553269] random: fast init done
[ 3.784726] device-mapper: uevent: version 1.0.3
[ 3.794890] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 4.504900] random: crng init done
[ 5.720305] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.730371] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.741026] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.751277] sis900.c: v1.08.10 Apr. 2 2006
[ 5.763085] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 5.773133] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 5.781917] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 5.791882] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.800774] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.812409] sky2: driver version 1.30
[ 5.822170] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 5.835530] megasas: 06.811.02.00-rc1
[ 5.851630] md: raid0 personality registered for level 0
[ 5.926575] raid6: sse2x1 gen() 14714 MB/s
[ 6.002575] raid6: sse2x1 xor() 10408 MB/s
[ 6.078577] raid6: sse2x2 gen() 18188 MB/s
[ 6.154573] raid6: sse2x2 xor() 12711 MB/s
[ 6.230573] raid6: sse2x4 gen() 20751 MB/s
[ 6.306572] raid6: sse2x4 xor() 14037 MB/s
[ 6.382567] raid6: avx2x1 gen() 29218 MB/s
[ 6.458571] raid6: avx2x2 gen() 33332 MB/s
[ 6.534564] raid6: avx2x4 gen() 37118 MB/s
[ 6.542874] raid6: using algorithm avx2x4 gen() 37118 MB/s
[ 6.551142] raid6: using avx2x2 recovery algorithm
[ 6.559811] xor: automatically using best checksumming function avx
[ 6.568592] async_tx: api initialized (async)
[ 6.577787] md: raid6 personality registered for level 6
[ 6.586039] md: raid5 personality registered for level 5
[ 6.594095] md: raid4 personality registered for level 4
[ 6.603494] Fusion MPT base driver 3.04.20
[ 6.611261] Copyright (c) 1999-2008 LSI Corporation
[ 6.619482] Fusion MPT SPI Host driver 3.04.20
[ 6.628367] Fusion MPT SAS Host driver 3.04.20
[ 6.636891] Fusion MPT misc device (ioctl) driver 3.04.20
[ 6.644784] mptctl: Registered with Fusion MPT base driver
[ 6.652823] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 6.665141] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[ 6.673375] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 6.683269] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 6.692586] QLogic/NetXen Network Driver v4.0.82
[ 6.702597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.711788] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.721154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.730679] md: linear personality registered for level -1
[ 6.739574] md: multipath personality registered for level -4
[ 6.751841] md: raid10 personality registered for level 10
[ 16.789057] Btrfs loaded, crc32c=crc32c-intel
[ 20.929282] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ 21.585428] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.676807] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 21.694335] systemd[1]: Detected architecture x86-64.
[ 21.746330] systemd[1]: Set hostname to <y00>.
[ 22.161912] systemd[1]: bind9.service: Cannot add dependency job, ignoring: Unit bind9.service is masked.
[ 22.172010] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 22.191996] systemd[1]: Listening on Journal Socket.
[ 22.212033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 22.233022] systemd[1]: Listening on Journal Audit Socket.
[ 22.254574] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 22.276564] systemd[1]: Created slice User and Session Slice.
[ 22.584229] EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
[ 22.747466] systemd-journald[665]: Received request to flush runtime journal from PID 1
[ 23.208143] igb 0000:02:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 23.216416] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 23.224832] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 23.295280] EFI Variables Facility v0.08 2004-May-17
[ 23.306670] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 23.317841] ACPI: Sleep Button [SLPB]
[ 23.328930] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 23.339866] ACPI: Power Button [PWRF]
[ 23.362042] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 23.511830] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 23.520954] mei_me 0000:00:16.1: Device doesn't have valid ME Interface
[ 23.533366] Bluetooth: Core ver 2.22
[ 23.542147] NET: Registered protocol family 31
[ 23.551013] Bluetooth: HCI device and connection manager initialized
[ 23.560042] Bluetooth: HCI socket layer initialized
[ 23.568989] Bluetooth: L2CAP socket layer initialized
[ 23.570198] acpi INT33D6:00: intel-vbtn: created platform device
[ 23.574059] input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input5
[ 23.596361] Bluetooth: SCO socket layer initialized
[ 23.596582] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.631679] iTCO_vendor_support: vendor-support=0
[ 23.663292] Bluetooth: HCI UART driver ver 2.3
[ 23.672423] Bluetooth: HCI UART protocol H4 registered
[ 23.681576] Bluetooth: HCI UART protocol BCSP registered
[ 23.690584] Bluetooth: HCI UART protocol LL registered
[ 23.699413] Bluetooth: HCI UART protocol ATH3K registered
[ 23.708237] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 23.717117] Bluetooth: HCI UART protocol Intel registered
[ 23.725842] Bluetooth: HCI UART protocol Broadcom registered
[ 23.726235] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.726686] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 23.735751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.738880] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 23.769163] Bluetooth: HCI UART protocol QCA registered
[ 23.778036] Bluetooth: HCI UART protocol AG6XX registered
[ 23.786870] Bluetooth: HCI UART protocol Marvell registered
[ 23.798362] [drm] Initialized
[ 23.871372] checking generic (9f000000 300000) vs hw (9f000000 1000000)
[ 23.871373] fb: switching to mgag200drmfb from EFI VGA
[ 23.880186] Console: switching to colour dummy device 80x25
[ 23.887634] [TTM] Zone kernel: Available graphics memory: 16297684 kiB
[ 23.887636] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 23.887638] [TTM] Initializing pool allocator
[ 23.887642] [TTM] Initializing DMA pool allocator
[ 23.919887] fbcon: mgadrmfb (fb0) is primary device
[ 23.919935] Console: switching to colour frame buffer device 128x48
[ 24.193557] mgag200 0000:01:00.0: fb0: mgadrmfb frame buffer device
[ 24.222500] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.0 on minor 0
[ 24.438528] power_meter ACPI000D:00: Found ACPI power meter.
[ 24.438716] wmi: Mapper loaded
[ 24.551259] power_meter ACPI000D:00: Found ACPI power meter.
[ 24.551328] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 24.607531] intel_rapl: Found RAPL domain package
[ 24.607557] intel_rapl: Found RAPL domain core
[ 24.607579] intel_rapl: Found RAPL domain dram
[ 25.837410] Adding 4094972k swap on /dev/sda3. Priority:-1 extents:1 across:4094972k FS
[ 25.927978] ppdev: user-space parallel port driver
[ 26.350799] Adding 4094972k swap on /dev/sdb3. Priority:-2 extents:1 across:4094972k FS
[ 26.894631] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 26.901866] xenbr0: port 1(eno2) entered blocking state
[ 26.902245] xenbr0: port 1(eno2) entered disabled state
[ 26.902648] device eno2 entered promiscuous mode
[ 26.948074] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 26.948211] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 26.951530] xenbr0: port 1(eno2) entered blocking state
[ 26.951531] xenbr0: port 1(eno2) entered forwarding state
[ 26.953978] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[-- Attachment #8: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: I only see one CPU core on Xen when booted via grub
2018-01-23 12:03 ` msd+xen-devel
@ 2018-01-23 17:56 ` Daniel Kiper
0 siblings, 0 replies; 9+ messages in thread
From: Daniel Kiper @ 2018-01-23 17:56 UTC (permalink / raw)
To: msd+xen-devel; +Cc: xen-devel, Jan Beulich
On Tue, Jan 23, 2018 at 01:03:04PM +0100, msd+xen-devel@msd.im wrote:
> >I need at least GRUB2 version, Xen version
>
> ```
> # apt-cache policy grub2-common
> grub2-common:
> Installé : 2.02~beta3-5
> Candidat : 2.02~beta3-5
> Table de version :
> *** 2.02~beta3-5 500
> 500 http://debian.mirrors.ovh.net/debian stretch/main amd64
> Packages
> 100 /var/lib/dpkg/status
[...]
This version of GRUB2 will not work with Xen on UEFI platforms.
Please take the latest one from the upstream GRUB2 git tree.
I hope that helps.
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-01-23 17:56 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-22 17:28 I only see one CPU core on Xen when booted via grub msd+xen-devel
2018-01-22 17:45 ` Roger Pau Monné
2018-01-23 9:27 ` msd+xen-devel
2018-01-23 9:10 ` Jan Beulich
2018-01-23 9:39 ` msd+xen-devel
2018-01-23 10:09 ` Jan Beulich
2018-01-23 11:32 ` Daniel Kiper
2018-01-23 12:03 ` msd+xen-devel
2018-01-23 17:56 ` Daniel Kiper
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.