All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnaud Ebalard <arno@natisbad.org>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@free-electrons.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	TuxOholic <tuxoholic@hotmail.de>
Subject: [PATCH 2/2] arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file
Date: Sat, 10 Oct 2015 00:10:39 +0200	[thread overview]
Message-ID: <277de75473af2431849a7494ae65b57dbc9a8309.1444428035.git.arno@natisbad.org> (raw)
In-Reply-To: <cover.1444428035.git.arno@natisbad.org>


This cosmetic patch reorder nodes under internal-regs by increasing
address order, as epxected.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
---
 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++-------------
 1 file changed, 43 insertions(+), 43 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 85b2f87c0b8a..d72a69d97ba2 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -94,54 +94,11 @@
 				status = "disabled";
 			};
 
-			/* Two rear eSATA ports */
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
 			i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <400000>;
 				status = "okay";
 
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
-				};
-
 				/* Controller for rear fan #1 of 3 (Protechnic
 				 * MGT4012XB-O20, 8000RPM) near eSATA port */
 				g762_fan1: g762@3e {
@@ -178,6 +135,49 @@
 					compatible = "gmt,g751";
 					reg = <0x4c>;
 				};
+
+				isl12057: isl12057@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					isil,irq2-can-wakeup-machine;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
 			nand@d0000 {
-- 
2.5.3


WARNING: multiple messages have this Message-ID (diff)
From: arno@natisbad.org (Arnaud Ebalard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file
Date: Sat, 10 Oct 2015 00:10:39 +0200	[thread overview]
Message-ID: <277de75473af2431849a7494ae65b57dbc9a8309.1444428035.git.arno@natisbad.org> (raw)
In-Reply-To: <cover.1444428035.git.arno@natisbad.org>


This cosmetic patch reorder nodes under internal-regs by increasing
address order, as epxected.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
---
 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++-------------
 1 file changed, 43 insertions(+), 43 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 85b2f87c0b8a..d72a69d97ba2 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -94,54 +94,11 @@
 				status = "disabled";
 			};
 
-			/* Two rear eSATA ports */
-			sata at a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			serial at 12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet at 70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet at 74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb at 50000 {
-				status = "okay";
-			};
-
 			i2c at 11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <400000>;
 				status = "okay";
 
-				isl12057: isl12057 at 68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
-				};
-
 				/* Controller for rear fan #1 of 3 (Protechnic
 				 * MGT4012XB-O20, 8000RPM) near eSATA port */
 				g762_fan1: g762 at 3e {
@@ -178,6 +135,49 @@
 					compatible = "gmt,g751";
 					reg = <0x4c>;
 				};
+
+				isl12057: isl12057 at 68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					isil,irq2-can-wakeup-machine;
+				};
+			};
+
+			serial at 12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb at 50000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy at 1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet at 70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet at 74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata at a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
 			nand at d0000 {
-- 
2.5.3

  parent reply	other threads:[~2015-10-09 22:20 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-09 22:10 [PATCH 0/2] arm: mvebu: disable unused rtc + cosmetic patch for ReadyNAS devices Arnaud Ebalard
2015-10-09 22:10 ` Arnaud Ebalard
2015-10-09 22:10 ` [PATCH 1/2] arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 Arnaud Ebalard
2015-10-09 22:10   ` Arnaud Ebalard
2015-10-12 14:21   ` Andrew Lunn
2015-10-12 14:21     ` Andrew Lunn
2015-10-12 14:21     ` Andrew Lunn
2015-10-12 16:31   ` Gregory CLEMENT
2015-10-12 16:31     ` Gregory CLEMENT
2015-10-09 22:10 ` Arnaud Ebalard [this message]
2015-10-09 22:10   ` [PATCH 2/2] arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file Arnaud Ebalard
2015-10-12 14:23   ` Andrew Lunn
2015-10-12 14:23     ` Andrew Lunn
2015-10-12 16:32     ` Gregory CLEMENT
2015-10-12 16:32       ` Gregory CLEMENT
2015-10-12 16:32       ` Gregory CLEMENT
2015-10-12 16:27   ` Gregory CLEMENT
2015-10-12 16:27     ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=277de75473af2431849a7494ae65b57dbc9a8309.1444428035.git.arno@natisbad.org \
    --to=arno@natisbad.org \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gregory.clement@free-electrons.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=tuxoholic@hotmail.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.