* [U-Boot-Users] Micron NAND Driver
@ 2007-03-27 4:01 Raghu
2007-03-27 4:04 ` Aubrey Li
0 siblings, 1 reply; 2+ messages in thread
From: Raghu @ 2007-03-27 4:01 UTC (permalink / raw)
To: u-boot
Hello All,
I have a custom OMAP2430 board with Micron NAND
(MT29F1G16ABB) as a PoP interface.
I have the Vendor ID and Device ID entried in the
NAND.h file and during U-Boot start up I am able to
see the prints called from "nand_init" function.
Is there a patch to add the READ/PROGRAM commands for
this chip?
Thanks in advance.
Warm Regards,
Raghu
____________________________________________________________________________________
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] Micron NAND Driver
2007-03-27 4:01 [U-Boot-Users] Micron NAND Driver Raghu
@ 2007-03-27 4:04 ` Aubrey Li
0 siblings, 0 replies; 2+ messages in thread
From: Aubrey Li @ 2007-03-27 4:04 UTC (permalink / raw)
To: u-boot
On 3/27/07, Raghu <raghu_dk@yahoo.com> wrote:
> Hello All,
>
> I have a custom OMAP2430 board with Micron NAND
> (MT29F1G16ABB) as a PoP interface.
>
> I have the Vendor ID and Device ID entried in the
> NAND.h file and during U-Boot start up I am able to
> see the prints called from "nand_init" function.
>
> Is there a patch to add the READ/PROGRAM commands for
> this chip?
>
Please refer to u-boot/doc/README.nand
-Aubrey
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-03-27 4:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-27 4:01 [U-Boot-Users] Micron NAND Driver Raghu
2007-03-27 4:04 ` Aubrey Li
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.