* [Buildroot] Installing package libclthreads
@ 2016-10-03 12:21 Herschel Karunaratne
2016-10-03 16:31 ` Khem Raj
2016-10-04 20:57 ` Arnout Vandecappelle
0 siblings, 2 replies; 8+ messages in thread
From: Herschel Karunaratne @ 2016-10-03 12:21 UTC (permalink / raw)
To: buildroot
Hi,
I am trying to install "jconvolver" and have to install "libclthreads"
needed by jconvolver. "My "libclthreads.mk" is as follows,
#####################################################################
#
# libclthreads
#
####################################################################
LIBCLTHREADS_VERSION = 2.4.0
LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
LIBCLTHREADS_SITE = http://kokkinizta.linuxaudio.org/linuxaudio/downloads
LIBCLTHREADS_LICENSE = LGPLv2.1+
LIBCLTHREADS_LICENSE_FILES = COPYING
LIBCLTHREADS_INSTALL_STAGING = YES
LIBCLTHREADS_INSTALL_TARGET = YES
$(eval $(autotools-package))
When I build it seems to be OK but nothing in the installed folders. This is
message I get when I build,
>>> libclthreads 2.4.0 Configuring
(cd
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthre
ads-2.4.0/ && rm -rf config.cache &&
PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin:/root
/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/w
ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/usr/loc
al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/bin:/r
oot/bin:/opt/arm-2014.05/bin"
AR="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bi
n/arm-linux-gnueabihf-ar"
AS="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bi
n/arm-linux-gnueabihf-as"
LD="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bi
n/arm-linux-gnueabihf-ld"
NM="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bi
n/arm-linux-gnueabihf-nm"
CC="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bi
n/arm-linux-gnueabihf-gcc"
GCC="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/b
in/arm-linux-gnueabihf-gcc"
CPP="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/b
in/arm-linux-gnueabihf-cpp"
CXX="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/b
in/arm-linux-gnueabihf-g++"
FC="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bi
n/arm-linux-gnueabihf-gfortran"
RANLIB="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/us
r/bin/arm-linux-gnueabihf-ranlib"
READELF="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/u
sr/bin/arm-linux-gnueabihf-readelf"
STRIP="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr
/bin/arm-linux-gnueabihf-strip"
OBJCOPY="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/u
sr/bin/arm-linux-gnueabihf-objcopy"
OBJDUMP="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/u
sr/bin/arm-linux-gnueabihf-objdump" AR_FOR_BUILD="/usr/bin/ar"
AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc"
GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++"
LD_FOR_BUILD="/usr/bin/ld"
CPPFLAGS_FOR_BUILD="-I/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/
output/host/usr/include" CFLAGS_FOR_BUILD="-O2
-I/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/incl
ude" CXXFLAGS_FOR_BUILD="-O2
-I/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/incl
ude"
LDFLAGS_FOR_BUILD="-L/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/o
utput/host/lib
-L/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/lib
-Wl,-rpath,/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host
/usr/lib" FCFLAGS_FOR_BUILD=""
DEFAULT_ASSEMBLER="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/out
put/host/usr/bin/arm-linux-gnueabihf-as"
DEFAULT_LINKER="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output
/host/usr/bin/arm-linux-gnueabihf-ld" CPPFLAGS="-D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os "
CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-Os " LDFLAGS="" FCFLAGS=""
PKG_CONFIG="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/hos
t/usr/bin/pkg-config"
STAGING_DIR="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/ho
st/usr/arm-buildroot-linux-gnueabihf/sysroot" INTLTOOL_PERL=/usr/bin/perl
ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes
ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes
gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes
ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes
lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no
CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-gnueabihf
--host=arm-buildroot-linux-gnueabihf --build=x86_64-unknown-linux-gnu
--prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var
--program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc
--disable-docs --disable-documentation --with-xmlto=no --with-fop=no
--disable-dependency-tracking --enable-ipv6 --disable-static
--enable-shared )
>>> libclthreads 2.4.0 Building
PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin:/root
/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/w
ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/usr/loc
al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/bin:/r
oot/bin:/opt/arm-2014.05/bin" /usr/bin/make -j5 -C
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthre
ads-2.4.0/
make[1]: Entering directory
`/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
eads-2.4.0'
g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
p_thread.o p_thread.cc
g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
a_thread.o a_thread.cc
g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
itc_mesg.o itc_mesg.cc
g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
itc_ip1q.o itc_ip1q.cc
g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
itc_ctrl.o itc_ctrl.cc
g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
textmsg.o textmsg.cc
g++ -shared -Wl,-soname,libclthreads.so.2 -o libclthreads.so.2.4.0
p_thread.o a_thread.o itc_mesg.o itc_ip1q.o itc_ctrl.o textmsg.o -lpthread
make[1]: Leaving directory
`/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
eads-2.4.0'
>>> libclthreads 2.4.0 Installing to target
PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin:/root
/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/w
ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/usr/loc
al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/bin:/r
oot/bin:/opt/arm-2014.05/bin" /usr/bin/make -j5
DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/target
install -C
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthre
ads-2.4.0/
make[1]: Entering directory
`/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
eads-2.4.0'
/usr/bin/install -d /usr/local/lib64
/usr/bin/install -m 644 clthreads.h /usr/local/include
/usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
/sbin/ldconfig -n /usr/local/lib64
ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
make[1]: Leaving directory
`/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
eads-2.4.0'
What could have gone wrong?
Thanks in advance.
Regards
Herschel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20161003/1bbd3eec/attachment.html>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
2016-10-03 12:21 [Buildroot] Installing package libclthreads Herschel Karunaratne
@ 2016-10-03 16:31 ` Khem Raj
2016-10-04 20:57 ` Arnout Vandecappelle
1 sibling, 0 replies; 8+ messages in thread
From: Khem Raj @ 2016-10-03 16:31 UTC (permalink / raw)
To: buildroot
Does it need to know that you are installing into a staging area and not
into /usr directly
On Oct 3, 2016 5:21 AM, "Herschel Karunaratne" <hk@synexint.com> wrote:
> Hi,
>
>
>
> I am trying to install ?jconvolver? and have to install ?libclthreads?
> needed by jconvolver. ?My ?libclthreads.mk? is as follows,
>
>
>
> #####################################################################
>
> #
>
> # libclthreads
>
> #
>
> ####################################################################
>
>
>
> LIBCLTHREADS_VERSION = 2.4.0
>
> LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
>
> LIBCLTHREADS_SITE = http://kokkinizta.linuxaudio.org/linuxaudio/downloads
>
> LIBCLTHREADS_LICENSE = LGPLv2.1+
>
> LIBCLTHREADS_LICENSE_FILES = COPYING
>
> LIBCLTHREADS_INSTALL_STAGING = YES
>
> LIBCLTHREADS_INSTALL_TARGET = YES
>
>
>
> $(eval $(autotools-package))
>
>
>
>
>
>
>
> When I build it seems to be OK but nothing in the installed folders. This
> is message I get when I build,
>
>
>
>
>
> >>> libclthreads 2.4.0 Configuring
>
> (cd /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/
> output/build/libclthreads-2.4.0/ && rm -rf config.cache &&
> PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/bin:/root/work/sinlinx/a33-organ/lichee/
> buildroot-2016.05/output/host/sbin:/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/
> work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/
> usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:
> /bin:/sbin:/opt/arm-2014.05/bin:/root/bin:/opt/arm-2014.05/bin"
> AR="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-ar" AS="/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/bin/arm-linux-gnueabihf-as"
> LD="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-ld" NM="/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/bin/arm-linux-gnueabihf-nm"
> CC="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-gcc"
> GCC="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-gcc"
> CPP="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-cpp"
> CXX="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-g++"
> FC="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-gfortran"
> RANLIB="/root/work/sinlinx/a33-organ/lichee/buildroot-
> 2016.05/output/host/usr/bin/arm-linux-gnueabihf-ranlib"
> READELF="/root/work/sinlinx/a33-organ/lichee/buildroot-
> 2016.05/output/host/usr/bin/arm-linux-gnueabihf-readelf"
> STRIP="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/usr/bin/arm-linux-gnueabihf-strip"
> OBJCOPY="/root/work/sinlinx/a33-organ/lichee/buildroot-
> 2016.05/output/host/usr/bin/arm-linux-gnueabihf-objcopy"
> OBJDUMP="/root/work/sinlinx/a33-organ/lichee/buildroot-
> 2016.05/output/host/usr/bin/arm-linux-gnueabihf-objdump"
> AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as"
> CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc"
> CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld"
> CPPFLAGS_FOR_BUILD="-I/root/work/sinlinx/a33-organ/lichee/
> buildroot-2016.05/output/host/usr/include" CFLAGS_FOR_BUILD="-O2
> -I/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/include"
> CXXFLAGS_FOR_BUILD="-O2 -I/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/include"
> LDFLAGS_FOR_BUILD="-L/root/work/sinlinx/a33-organ/lichee/
> buildroot-2016.05/output/host/lib -L/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/lib
> -Wl,-rpath,/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/lib"
> FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/root/work/
> sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/
> usr/bin/arm-linux-gnueabihf-as" DEFAULT_LINKER="/root/work/
> sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/
> usr/bin/arm-linux-gnueabihf-ld" CPPFLAGS="-D_LARGEFILE_SOURCE
> -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE
> -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os "
> CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
> -Os " LDFLAGS="" FCFLAGS="" PKG_CONFIG="/root/work/
> sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin/pkg-config"
> STAGING_DIR="/root/work/sinlinx/a33-organ/lichee/
> buildroot-2016.05/output/host/usr/arm-buildroot-linux-gnueabihf/sysroot"
> INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes
> ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes
> ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes
> ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes
> ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec=""
> ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure
> --target=arm-buildroot-linux-gnueabihf --host=arm-buildroot-linux-gnueabihf
> --build=x86_64-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr
> --sysconfdir=/etc --localstatedir=/var --program-prefix=""
> --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs
> --disable-documentation --with-xmlto=no --with-fop=no
> --disable-dependency-tracking --enable-ipv6 --disable-static
> --enable-shared )
>
> >>> libclthreads 2.4.0 Building
>
> PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/bin:/root/work/sinlinx/a33-organ/lichee/
> buildroot-2016.05/output/host/sbin:/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/
> work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/
> usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:
> /bin:/sbin:/opt/arm-2014.05/bin:/root/bin:/opt/arm-2014.05/bin"
> /usr/bin/make -j5 -C /root/work/sinlinx/a33-organ/
> lichee/buildroot-2016.05/output/build/libclthreads-2.4.0/
>
> make[1]: Entering directory `/root/work/sinlinx/a33-organ/
> lichee/buildroot-2016.05/output/build/libclthreads-2.4.0'
>
> g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
> p_thread.o p_thread.cc
>
> g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
> a_thread.o a_thread.cc
>
> g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
> itc_mesg.o itc_mesg.cc
>
> g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
> itc_ip1q.o itc_ip1q.cc
>
> g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
> itc_ctrl.o itc_ctrl.cc
>
> g++ -Wall -I. -fpic -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -O2 -c -o
> textmsg.o textmsg.cc
>
> g++ -shared -Wl,-soname,libclthreads.so.2 -o libclthreads.so.2.4.0
> p_thread.o a_thread.o itc_mesg.o itc_ip1q.o itc_ctrl.o textmsg.o -lpthread
>
> make[1]: Leaving directory `/root/work/sinlinx/a33-organ/
> lichee/buildroot-2016.05/output/build/libclthreads-2.4.0'
>
> >>> libclthreads 2.4.0 Installing to target
>
> PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.
> 05/output/host/bin:/root/work/sinlinx/a33-organ/lichee/
> buildroot-2016.05/output/host/sbin:/root/work/sinlinx/a33-
> organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/
> work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/
> usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:
> /bin:/sbin:/opt/arm-2014.05/bin:/root/bin:/opt/arm-2014.05/bin"
> /usr/bin/make -j5 DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/target
> install -C /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/
> output/build/libclthreads-2.4.0/
>
> make[1]: Entering directory `/root/work/sinlinx/a33-organ/
> lichee/buildroot-2016.05/output/build/libclthreads-2.4.0'
>
> /usr/bin/install -d /usr/local/lib64
>
> /usr/bin/install -m 644 clthreads.h /usr/local/include
>
> /usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
>
> /sbin/ldconfig -n /usr/local/lib64
>
> ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
>
> make[1]: Leaving directory `/root/work/sinlinx/a33-organ/
> lichee/buildroot-2016.05/output/build/libclthreads-2.4.0'
>
>
>
>
>
>
>
> What could have gone wrong?
>
>
>
> Thanks in advance.
>
>
>
>
>
> *Regards*
>
> *Herschel*
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20161003/dac0903c/attachment.html>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
2016-10-03 12:21 [Buildroot] Installing package libclthreads Herschel Karunaratne
2016-10-03 16:31 ` Khem Raj
@ 2016-10-04 20:57 ` Arnout Vandecappelle
2016-10-05 10:42 ` Herschel Karunaratne
1 sibling, 1 reply; 8+ messages in thread
From: Arnout Vandecappelle @ 2016-10-04 20:57 UTC (permalink / raw)
To: buildroot
Hi Herschel,
Please avoid using HTML mail on this list.
On 03-10-16 14:21, Herschel Karunaratne wrote:
> Hi,
>
>
>
> I am trying to install ?jconvolver? and have to install ?libclthreads? needed
> by jconvolver. ?My ?libclthreads.mk? is as follows,
>
>
>
> #####################################################################
>
> #
>
> # libclthreads
>
> #
>
> ####################################################################
>
>
>
> LIBCLTHREADS_VERSION = 2.4.0
>
> LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
Small nit: since upstream calls it "clthreads", we prefer that the buildroot
package has the same name.
>
> LIBCLTHREADS_SITE = http://kokkinizta.linuxaudio.org/linuxaudio/downloads
>
> LIBCLTHREADS_LICENSE = LGPLv2.1+
>
> LIBCLTHREADS_LICENSE_FILES = COPYING
>
> LIBCLTHREADS_INSTALL_STAGING = YES
>
> LIBCLTHREADS_INSTALL_TARGET = YES
This one is not needed because the default.
>
>
>
> $(eval $(autotools-package))
>
>
>
>
>
>
>
> When I build it seems to be OK but nothing in the installed folders. This is
> message I get when I build,
>
[snip]
>>>> libclthreads 2.4.0 Installing to target
Weird, the install to staging is missing... I can't explain that...
>
> PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin:/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/bin:/root/bin:/opt/arm-2014.05/bin"
> /usr/bin/make -j5
> DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/target
> install -C
> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthreads-2.4.0/
>
> make[1]: Entering directory
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthreads-2.4.0'
>
> /usr/bin/install -d /usr/local/lib64
It looks like this package ignores both the configure --prefix option and the
DESTDIR argument to 'make install'. This basically makes the install commands
unusable. Either patch the Makefile.in to correct this, or define
LIBCLTHREADS_INSTALL_STAGING_CMDS and LIBCLTHREADS_INSTALL_TARGET_CMDS.
Regards,
Arnout
>
> /usr/bin/install -m 644 clthreads.h /usr/local/include
>
> /usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
>
> /sbin/ldconfig -n /usr/local/lib64
>
> ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
>
> make[1]: Leaving directory
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthreads-2.4.0'
>
>
>
>
>
>
>
> What could have gone wrong?
>
>
>
> Thanks in advance.
>
>
>
>
>
> *Regards*
>
> *Herschel*
>
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
2016-10-04 20:57 ` Arnout Vandecappelle
@ 2016-10-05 10:42 ` Herschel Karunaratne
2016-10-05 23:04 ` Arnout Vandecappelle
0 siblings, 1 reply; 8+ messages in thread
From: Herschel Karunaratne @ 2016-10-05 10:42 UTC (permalink / raw)
To: buildroot
Hi Arnout,
Thanks for the reply.
Sorry I will not use HTML.
Could you please send me a .mk file for this? I'm quite new to buildroot.
Regards,
Herschel
-----Original Message-----
From: Arnout Vandecappelle [mailto:arnout at mind.be]
Sent: Wednesday, October 5, 2016 2:27 AM
To: Herschel Karunaratne <hk@synexint.com>; buildroot at busybox.net
Subject: Re: [Buildroot] Installing package libclthreads
Hi Herschel,
Please avoid using HTML mail on this list.
On 03-10-16 14:21, Herschel Karunaratne wrote:
> Hi,
>
>
>
> I am trying to install "jconvolver" and have to install
> "libclthreads" needed by jconvolver. "My "libclthreads.mk" is as
> follows,
>
>
>
> #####################################################################
>
> #
>
> # libclthreads
>
> #
>
> ####################################################################
>
>
>
> LIBCLTHREADS_VERSION = 2.4.0
>
> LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
Small nit: since upstream calls it "clthreads", we prefer that the
buildroot package has the same name.
>
> LIBCLTHREADS_SITE =
> http://kokkinizta.linuxaudio.org/linuxaudio/downloads
>
> LIBCLTHREADS_LICENSE = LGPLv2.1+
>
> LIBCLTHREADS_LICENSE_FILES = COPYING
>
> LIBCLTHREADS_INSTALL_STAGING = YES
>
> LIBCLTHREADS_INSTALL_TARGET = YES
This one is not needed because the default.
>
>
>
> $(eval $(autotools-package))
>
>
>
>
>
>
>
> When I build it seems to be OK but nothing in the installed folders.
> This is message I get when I build,
>
[snip]
>>>> libclthreads 2.4.0 Installing to target
Weird, the install to staging is missing... I can't explain that...
>
>
PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin:/root
/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/w
ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/usr/loc
al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/bin:/r
oot/bin:/opt/arm-2014.05/bin"
> /usr/bin/make -j5
> DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/t
> arget
> install -C
> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/lib
> clthreads-2.4.0/
>
> make[1]: Entering directory
>
`/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
eads-2.4.0'
>
> /usr/bin/install -d /usr/local/lib64
It looks like this package ignores both the configure --prefix option and
the DESTDIR argument to 'make install'. This basically makes the install
commands unusable. Either patch the Makefile.in to correct this, or define
LIBCLTHREADS_INSTALL_STAGING_CMDS and LIBCLTHREADS_INSTALL_TARGET_CMDS.
Regards,
Arnout
>
> /usr/bin/install -m 644 clthreads.h /usr/local/include
>
> /usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
>
> /sbin/ldconfig -n /usr/local/lib64
>
> ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
>
> make[1]: Leaving directory
>
`/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
eads-2.4.0'
>
>
>
>
>
>
>
> What could have gone wrong?
>
>
>
> Thanks in advance.
>
>
>
>
>
> *Regards*
>
> *Herschel*
>
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
2016-10-05 10:42 ` Herschel Karunaratne
@ 2016-10-05 23:04 ` Arnout Vandecappelle
2016-10-06 15:16 ` Herschel Karunaratne
2016-10-10 6:32 ` Herschel Karunaratne
0 siblings, 2 replies; 8+ messages in thread
From: Arnout Vandecappelle @ 2016-10-05 23:04 UTC (permalink / raw)
To: buildroot
On 05-10-16 12:42, Herschel Karunaratne wrote:
> Hi Arnout,
>
> Thanks for the reply.
>
> Sorry I will not use HTML.
Please also don't top-post, but reply in-line :-)
> Could you please send me a .mk file for this? I'm quite new to buildroot.
I'm sorry, I don't have the time to do that for you at the moment. But if you
want, you can hire my company to do it, and I'll make time :-)
I took a quick look, and there is quite a lot wrong with the .mk file you
previously sent. The URL is wrong, and the package is not actually an autotools
package (it doesn't have a configure script). I don't know what kind of hacks
you have done to get the output you showed earlier, but that is certainly *not*
the output you get from that .mk file.
Regards,
Arnout
>
> Regards,
> Herschel
>
>
> -----Original Message-----
> From: Arnout Vandecappelle [mailto:arnout at mind.be]
> Sent: Wednesday, October 5, 2016 2:27 AM
> To: Herschel Karunaratne <hk@synexint.com>; buildroot at busybox.net
> Subject: Re: [Buildroot] Installing package libclthreads
>
> Hi Herschel,
>
> Please avoid using HTML mail on this list.
>
>
> On 03-10-16 14:21, Herschel Karunaratne wrote:
>> Hi,
>>
>>
>>
>> I am trying to install "jconvolver" and have to install
>> "libclthreads" needed by jconvolver. "My "libclthreads.mk" is as
>> follows,
>>
>>
>>
>> #####################################################################
>>
>> #
>>
>> # libclthreads
>>
>> #
>>
>> ####################################################################
>>
>>
>>
>> LIBCLTHREADS_VERSION = 2.4.0
>>
>> LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
>
> Small nit: since upstream calls it "clthreads", we prefer that the
> buildroot package has the same name.
>
>>
>> LIBCLTHREADS_SITE =
>> http://kokkinizta.linuxaudio.org/linuxaudio/downloads
>>
>> LIBCLTHREADS_LICENSE = LGPLv2.1+
>>
>> LIBCLTHREADS_LICENSE_FILES = COPYING
>>
>> LIBCLTHREADS_INSTALL_STAGING = YES
>>
>> LIBCLTHREADS_INSTALL_TARGET = YES
>
> This one is not needed because the default.
>
>>
>>
>>
>> $(eval $(autotools-package))
>>
>>
>>
>>
>>
>>
>>
>> When I build it seems to be OK but nothing in the installed folders.
>> This is message I get when I build,
>>
> [snip]
>>>>> libclthreads 2.4.0 Installing to target
>
> Weird, the install to staging is missing... I can't explain that...
>
>
>>
>>
> PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin:/root
> /work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/root/w
> ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/usr/loc
> al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/bin:/r
> oot/bin:/opt/arm-2014.05/bin"
>> /usr/bin/make -j5
>> DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/t
>> arget
>> install -C
>> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/lib
>> clthreads-2.4.0/
>>
>> make[1]: Entering directory
>>
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
> eads-2.4.0'
>>
>> /usr/bin/install -d /usr/local/lib64
>
> It looks like this package ignores both the configure --prefix option and
> the DESTDIR argument to 'make install'. This basically makes the install
> commands unusable. Either patch the Makefile.in to correct this, or define
> LIBCLTHREADS_INSTALL_STAGING_CMDS and LIBCLTHREADS_INSTALL_TARGET_CMDS.
>
>
> Regards,
> Arnout
>
>
>>
>> /usr/bin/install -m 644 clthreads.h /usr/local/include
>>
>> /usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
>>
>> /sbin/ldconfig -n /usr/local/lib64
>>
>> ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
>>
>> make[1]: Leaving directory
>>
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/libclthr
> eads-2.4.0'
>>
>>
>>
>>
>>
>>
>>
>> What could have gone wrong?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>>
>>
>> *Regards*
>>
>> *Herschel*
>>
>>
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
2016-10-05 23:04 ` Arnout Vandecappelle
@ 2016-10-06 15:16 ` Herschel Karunaratne
2016-10-10 6:32 ` Herschel Karunaratne
1 sibling, 0 replies; 8+ messages in thread
From: Herschel Karunaratne @ 2016-10-06 15:16 UTC (permalink / raw)
To: buildroot
Hi Arnout,
Thanks for the help and support. This only a hobby project, reverb for my
organ, and not a commercial project. I will give it a try by correcting the
errors you have shown.
Thanks again and any further guidance is greatly appreciated.
Regards
?
Herschel
-----Original Message-----
From: Arnout Vandecappelle [mailto:arnout at mind.be]
Sent: Thursday, October 6, 2016 4:35 AM
To: Herschel Karunaratne <hk@synexint.com>; buildroot at busybox.net
Subject: Re: [Buildroot] Installing package libclthreads
On 05-10-16 12:42, Herschel Karunaratne wrote:
> Hi Arnout,
>
> Thanks for the reply.
>
> Sorry I will not use HTML.
Please also don't top-post, but reply in-line :-)
> Could you please send me a .mk file for this? I'm quite new to buildroot.
I'm sorry, I don't have the time to do that for you at the moment. But if
you want, you can hire my company to do it, and I'll make time :-)
I took a quick look, and there is quite a lot wrong with the .mk file you
previously sent. The URL is wrong, and the package is not actually an
autotools package (it doesn't have a configure script). I don't know what
kind of hacks you have done to get the output you showed earlier, but that
is certainly *not* the output you get from that .mk file.
Regards,
Arnout
>
> Regards,
> Herschel
>
>
> -----Original Message-----
> From: Arnout Vandecappelle [mailto:arnout at mind.be]
> Sent: Wednesday, October 5, 2016 2:27 AM
> To: Herschel Karunaratne <hk@synexint.com>; buildroot at busybox.net
> Subject: Re: [Buildroot] Installing package libclthreads
>
> Hi Herschel,
>
> Please avoid using HTML mail on this list.
>
>
> On 03-10-16 14:21, Herschel Karunaratne wrote:
>> Hi,
>>
>>
>>
>> I am trying to install "jconvolver" and have to install
>> "libclthreads" needed by jconvolver. "My "libclthreads.mk" is as
>> follows,
>>
>>
>>
>> #####################################################################
>>
>> #
>>
>> # libclthreads
>>
>> #
>>
>> ####################################################################
>>
>>
>>
>> LIBCLTHREADS_VERSION = 2.4.0
>>
>> LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
>
> Small nit: since upstream calls it "clthreads", we prefer that the
> buildroot package has the same name.
>
>>
>> LIBCLTHREADS_SITE =
>> http://kokkinizta.linuxaudio.org/linuxaudio/downloads
>>
>> LIBCLTHREADS_LICENSE = LGPLv2.1+
>>
>> LIBCLTHREADS_LICENSE_FILES = COPYING
>>
>> LIBCLTHREADS_INSTALL_STAGING = YES
>>
>> LIBCLTHREADS_INSTALL_TARGET = YES
>
> This one is not needed because the default.
>
>>
>>
>>
>> $(eval $(autotools-package))
>>
>>
>>
>>
>>
>>
>>
>> When I build it seems to be OK but nothing in the installed folders.
>> This is message I get when I build,
>>
> [snip]
>>>>> libclthreads 2.4.0 Installing to target
>
> Weird, the install to staging is missing... I can't explain that...
>
>
>>
>>
>
PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin
> :/root
> /work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/
> root/w
> ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/u
> sr/loc
> al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/
> bin:/r
> oot/bin:/opt/arm-2014.05/bin"
>> /usr/bin/make -j5
>> DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/
>> t
>> arget
>> install -C
>> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/li
>> b
>> clthreads-2.4.0/
>>
>> make[1]: Entering directory
>>
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/li
> bclthr
> eads-2.4.0'
>>
>> /usr/bin/install -d /usr/local/lib64
>
> It looks like this package ignores both the configure --prefix option
> and the DESTDIR argument to 'make install'. This basically makes the
> install commands unusable. Either patch the Makefile.in to correct
> this, or define LIBCLTHREADS_INSTALL_STAGING_CMDS and
LIBCLTHREADS_INSTALL_TARGET_CMDS.
>
>
> Regards,
> Arnout
>
>
>>
>> /usr/bin/install -m 644 clthreads.h /usr/local/include
>>
>> /usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
>>
>> /sbin/ldconfig -n /usr/local/lib64
>>
>> ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
>>
>> make[1]: Leaving directory
>>
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/li
> bclthr
> eads-2.4.0'
>>
>>
>>
>>
>>
>>
>>
>> What could have gone wrong?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>>
>>
>> *Regards*
>>
>> *Herschel*
>>
>>
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
2016-10-05 23:04 ` Arnout Vandecappelle
2016-10-06 15:16 ` Herschel Karunaratne
@ 2016-10-10 6:32 ` Herschel Karunaratne
1 sibling, 0 replies; 8+ messages in thread
From: Herschel Karunaratne @ 2016-10-10 6:32 UTC (permalink / raw)
To: buildroot
Hi Arnout,
Thanks for the support and I manage to get it working.
Regards
?
Herschel
-----Original Message-----
From: Arnout Vandecappelle [mailto:arnout at mind.be]
Sent: Thursday, October 6, 2016 4:35 AM
To: Herschel Karunaratne <hk@synexint.com>; buildroot at busybox.net
Subject: Re: [Buildroot] Installing package libclthreads
On 05-10-16 12:42, Herschel Karunaratne wrote:
> Hi Arnout,
>
> Thanks for the reply.
>
> Sorry I will not use HTML.
Please also don't top-post, but reply in-line :-)
> Could you please send me a .mk file for this? I'm quite new to buildroot.
I'm sorry, I don't have the time to do that for you at the moment. But if
you want, you can hire my company to do it, and I'll make time :-)
I took a quick look, and there is quite a lot wrong with the .mk file you
previously sent. The URL is wrong, and the package is not actually an
autotools package (it doesn't have a configure script). I don't know what
kind of hacks you have done to get the output you showed earlier, but that
is certainly *not* the output you get from that .mk file.
Regards,
Arnout
>
> Regards,
> Herschel
>
>
> -----Original Message-----
> From: Arnout Vandecappelle [mailto:arnout at mind.be]
> Sent: Wednesday, October 5, 2016 2:27 AM
> To: Herschel Karunaratne <hk@synexint.com>; buildroot at busybox.net
> Subject: Re: [Buildroot] Installing package libclthreads
>
> Hi Herschel,
>
> Please avoid using HTML mail on this list.
>
>
> On 03-10-16 14:21, Herschel Karunaratne wrote:
>> Hi,
>>
>>
>>
>> I am trying to install "jconvolver" and have to install
>> "libclthreads" needed by jconvolver. "My "libclthreads.mk" is as
>> follows,
>>
>>
>>
>> #####################################################################
>>
>> #
>>
>> # libclthreads
>>
>> #
>>
>> ####################################################################
>>
>>
>>
>> LIBCLTHREADS_VERSION = 2.4.0
>>
>> LIBCLTHREADS_SOURCE = clthreads-$(LIBCLTHREADS_VERSION).tar.bz2
>
> Small nit: since upstream calls it "clthreads", we prefer that the
> buildroot package has the same name.
>
>>
>> LIBCLTHREADS_SITE =
>> http://kokkinizta.linuxaudio.org/linuxaudio/downloads
>>
>> LIBCLTHREADS_LICENSE = LGPLv2.1+
>>
>> LIBCLTHREADS_LICENSE_FILES = COPYING
>>
>> LIBCLTHREADS_INSTALL_STAGING = YES
>>
>> LIBCLTHREADS_INSTALL_TARGET = YES
>
> This one is not needed because the default.
>
>>
>>
>>
>> $(eval $(autotools-package))
>>
>>
>>
>>
>>
>>
>>
>> When I build it seems to be OK but nothing in the installed folders.
>> This is message I get when I build,
>>
> [snip]
>>>>> libclthreads 2.4.0 Installing to target
>
> Weird, the install to staging is missing... I can't explain that...
>
>
>>
>>
>
PATH="/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/bin:
> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/sbin
> :/root
> /work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/bin:/
> root/w
> ork/sinlinx/a33-organ/lichee/buildroot-2016.05/output/host/usr/sbin:/u
> sr/loc
> al/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/opt/arm-2014.05/
> bin:/r
> oot/bin:/opt/arm-2014.05/bin"
>> /usr/bin/make -j5
>> DESTDIR=/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/
>> t
>> arget
>> install -C
>> /root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/li
>> b
>> clthreads-2.4.0/
>>
>> make[1]: Entering directory
>>
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/li
> bclthr
> eads-2.4.0'
>>
>> /usr/bin/install -d /usr/local/lib64
>
> It looks like this package ignores both the configure --prefix option
> and the DESTDIR argument to 'make install'. This basically makes the
> install commands unusable. Either patch the Makefile.in to correct
> this, or define LIBCLTHREADS_INSTALL_STAGING_CMDS and
LIBCLTHREADS_INSTALL_TARGET_CMDS.
>
>
> Regards,
> Arnout
>
>
>>
>> /usr/bin/install -m 644 clthreads.h /usr/local/include
>>
>> /usr/bin/install -m 755 libclthreads.so.2.4.0 /usr/local/lib64
>>
>> /sbin/ldconfig -n /usr/local/lib64
>>
>> ln -sf libclthreads.so.2.4.0 /usr/local/lib64/libclthreads.so
>>
>> make[1]: Leaving directory
>>
> `/root/work/sinlinx/a33-organ/lichee/buildroot-2016.05/output/build/li
> bclthr
> eads-2.4.0'
>>
>>
>>
>>
>>
>>
>>
>> What could have gone wrong?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>>
>>
>> *Regards*
>>
>> *Herschel*
>>
>>
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Installing package libclthreads
@ 2016-10-03 16:41 Herschel Karunaratne
0 siblings, 0 replies; 8+ messages in thread
From: Herschel Karunaratne @ 2016-10-03 16:41 UTC (permalink / raw)
To: buildroot
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20161003/210f159b/attachment.html>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-10-10 6:32 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-03 12:21 [Buildroot] Installing package libclthreads Herschel Karunaratne
2016-10-03 16:31 ` Khem Raj
2016-10-04 20:57 ` Arnout Vandecappelle
2016-10-05 10:42 ` Herschel Karunaratne
2016-10-05 23:04 ` Arnout Vandecappelle
2016-10-06 15:16 ` Herschel Karunaratne
2016-10-10 6:32 ` Herschel Karunaratne
2016-10-03 16:41 Herschel Karunaratne
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.