[PATCH V3 Resend 00/12] clk: Add non CONFIG_HAVE_CLK routines

[PATCH V3 Resend 00/12] clk: Add non CONFIG_HAVE_CLK routines

[Viresh Kumar]

Hi,

I am resending this patchset as Andrew didn't get few patches of this set. Also
i have updated patches with Acked-by or Reviewed by of people who replied with
these strings.

Last time there were few discussion over this patchset which can be found at

http://lkml.org/lkml/2012/4/24/154

Many drivers are shared between architectures that may or may not have HAVE_CLK
selected for them. To remove compilation errors for them we enclose clk_*()
calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif.

This patchset removes the need of these CONFIG_HAVE_CLK statements, by
introducing dummy routines when HAVE_CLK is not selected by platforms. So,
definition of these routines will always be available. These calls will return
error for platforms that don't select HAVE_CLK.

V2->V3:
- Dummy routines now return NULL or 0.
- All user drivers must fail if clk_get returned error other than NULL.
- All user drivers don't need to validate their clk pointer before every call to
  clk_*() routines.
- Patches dropped earlier are again taken back, as they were following similar
  approach to what is implemented now.

Viresh Kumar (12):
  clk: Add non CONFIG_HAVE_CLK routines
  clk: Remove redundant depends on from drivers/Kconfig
  i2c/i2c-pxa: Remove conditional compilation of clk code
  usb/marvell: Remove conditional compilation of clk code
  usb/musb: Remove conditional compilation of clk code
  ata/pata_arasan: Remove conditional compilation of clk code
  ata/sata_mv: Remove conditional compilation of clk code
  net/c_can: Remove conditional compilation of clk code
  net/stmmac: Remove conditional compilation of clk code
  gadget/m66592: Remove conditional compilation of clk code
  gadget/r8a66597: Remove conditional compilation of clk code
  usb/host/r8a66597: Remove conditional compilation of clk code

 drivers/ata/pata_arasan_cf.c                      |   14 +--
 drivers/ata/sata_mv.c                             |   10 --
 drivers/clk/Kconfig                               |    2 -
 drivers/i2c/busses/i2c-pxa.c                      |    7 -
 drivers/net/can/c_can/c_can_platform.c            |    8 -
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |   41 -----
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   33 ++--
 drivers/usb/gadget/m66592-udc.c                   |    9 +-
 drivers/usb/gadget/m66592-udc.h                   |    5 -
 drivers/usb/gadget/r8a66597-udc.c                 |   11 +-
 drivers/usb/gadget/r8a66597-udc.h                 |    5 -
 drivers/usb/host/r8a66597-hcd.c                   |   12 --
 drivers/usb/host/r8a66597.h                       |    5 -
 drivers/usb/musb/musb_core.h                      |    8 -
 include/linux/clk.h                               |  168 +++++++++++++-------
 include/linux/platform_data/mv_usb.h              |    9 -
 16 files changed, 131 insertions(+), 216 deletions(-)

-- 
1.7.9

[PATCH V3 Resend 00/12] clk: Add non CONFIG_HAVE_CLK routines

[Viresh Kumar]

Hi,

I am resending this patchset as Andrew didn't get few patches of this set. Also
i have updated patches with Acked-by or Reviewed by of people who replied with
these strings.

Last time there were few discussion over this patchset which can be found at

http://lkml.org/lkml/2012/4/24/154

Many drivers are shared between architectures that may or may not have HAVE_CLK
selected for them. To remove compilation errors for them we enclose clk_*()
calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif.

This patchset removes the need of these CONFIG_HAVE_CLK statements, by
introducing dummy routines when HAVE_CLK is not selected by platforms. So,
definition of these routines will always be available. These calls will return
error for platforms that don't select HAVE_CLK.

V2->V3:
- Dummy routines now return NULL or 0.
- All user drivers must fail if clk_get returned error other than NULL.
- All user drivers don't need to validate their clk pointer before every call to
  clk_*() routines.
- Patches dropped earlier are again taken back, as they were following similar
  approach to what is implemented now.

Viresh Kumar (12):
  clk: Add non CONFIG_HAVE_CLK routines
  clk: Remove redundant depends on from drivers/Kconfig
  i2c/i2c-pxa: Remove conditional compilation of clk code
  usb/marvell: Remove conditional compilation of clk code
  usb/musb: Remove conditional compilation of clk code
  ata/pata_arasan: Remove conditional compilation of clk code
  ata/sata_mv: Remove conditional compilation of clk code
  net/c_can: Remove conditional compilation of clk code
  net/stmmac: Remove conditional compilation of clk code
  gadget/m66592: Remove conditional compilation of clk code
  gadget/r8a66597: Remove conditional compilation of clk code
  usb/host/r8a66597: Remove conditional compilation of clk code

 drivers/ata/pata_arasan_cf.c                      |   14 +--
 drivers/ata/sata_mv.c                             |   10 --
 drivers/clk/Kconfig                               |    2 -
 drivers/i2c/busses/i2c-pxa.c                      |    7 -
 drivers/net/can/c_can/c_can_platform.c            |    8 -
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |   41 -----
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   33 ++--
 drivers/usb/gadget/m66592-udc.c                   |    9 +-
 drivers/usb/gadget/m66592-udc.h                   |    5 -
 drivers/usb/gadget/r8a66597-udc.c                 |   11 +-
 drivers/usb/gadget/r8a66597-udc.h                 |    5 -
 drivers/usb/host/r8a66597-hcd.c                   |   12 --
 drivers/usb/host/r8a66597.h                       |    5 -
 drivers/usb/musb/musb_core.h                      |    8 -
 include/linux/clk.h                               |  168 +++++++++++++-------
 include/linux/platform_data/mv_usb.h              |    9 -
 16 files changed, 131 insertions(+), 216 deletions(-)

-- 
1.7.9

[PATCH V3 Resend 01/12] clk: Add non CONFIG_HAVE_CLK routines

[Viresh Kumar]

Many drivers are shared between architectures that may or may not have HAVE_CLK
selected for them. To remove compilation errors for them we enclose clk_*()
calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif.

This patch removes the need of these CONFIG_HAVE_CLK statements, by introducing
dummy routines when HAVE_CLK is not selected by platforms. So, definition of
these routines will always be available. These calls will return error for
platforms that don't select HAVE_CLK.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 include/linux/clk.h |  168 +++++++++++++++++++++++++++++++++------------------
 1 files changed, 109 insertions(+), 59 deletions(-)

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 70cf722..9f84b68 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -84,6 +84,43 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
 #endif /* !CONFIG_COMMON_CLK */
 
 /**
+ * clk_prepare - prepare a clock source
+ * @clk: clock source
+ *
+ * This prepares the clock source for use.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+int clk_prepare(struct clk *clk);
+#else
+static inline int clk_prepare(struct clk *clk)
+{
+	might_sleep();
+	return 0;
+}
+#endif
+
+/**
+ * clk_unprepare - undo preparation of a clock source
+ * @clk: clock source
+ *
+ * This undoes a previously prepared clock.  The caller must balance
+ * the number of prepare and unprepare calls.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+void clk_unprepare(struct clk *clk);
+#else
+static inline void clk_unprepare(struct clk *clk)
+{
+	might_sleep();
+}
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+/**
  * clk_get - lookup and obtain a reference to a clock producer.
  * @dev: device for clock "consumer"
  * @id: clock comsumer ID
@@ -121,24 +158,6 @@ struct clk *clk_get(struct device *dev, const char *id);
 struct clk *devm_clk_get(struct device *dev, const char *id);
 
 /**
- * clk_prepare - prepare a clock source
- * @clk: clock source
- *
- * This prepares the clock source for use.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-int clk_prepare(struct clk *clk);
-#else
-static inline int clk_prepare(struct clk *clk)
-{
-	might_sleep();
-	return 0;
-}
-#endif
-
-/**
  * clk_enable - inform the system when the clock source should be running.
  * @clk: clock source
  *
@@ -166,47 +185,6 @@ int clk_enable(struct clk *clk);
  */
 void clk_disable(struct clk *clk);
 
-
-/**
- * clk_unprepare - undo preparation of a clock source
- * @clk: clock source
- *
- * This undoes a previously prepared clock.  The caller must balance
- * the number of prepare and unprepare calls.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-void clk_unprepare(struct clk *clk);
-#else
-static inline void clk_unprepare(struct clk *clk)
-{
-	might_sleep();
-}
-#endif
-
-/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
-static inline int clk_prepare_enable(struct clk *clk)
-{
-	int ret;
-
-	ret = clk_prepare(clk);
-	if (ret)
-		return ret;
-	ret = clk_enable(clk);
-	if (ret)
-		clk_unprepare(clk);
-
-	return ret;
-}
-
-/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
-static inline void clk_disable_unprepare(struct clk *clk)
-{
-	clk_disable(clk);
-	clk_unprepare(clk);
-}
-
 /**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
  *		  This is only valid once the clock source has been enabled.
@@ -297,6 +275,78 @@ struct clk *clk_get_parent(struct clk *clk);
  */
 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 
+#else /* !CONFIG_HAVE_CLK */
+
+static inline struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline void clk_put(struct clk *clk) {}
+
+static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
+
+static inline int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static inline void clk_disable(struct clk *clk) {}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+	return 0;
+}
+
+static inline int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+
+static inline struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+
+#endif
+
+/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
 /**
  * clk_add_alias - add a new clock alias
  * @alias: name for clock alias
-- 
1.7.9

[PATCH V3 Resend 01/12] clk: Add non CONFIG_HAVE_CLK routines

[Viresh Kumar]

Many drivers are shared between architectures that may or may not have HAVE_CLK
selected for them. To remove compilation errors for them we enclose clk_*()
calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif.

This patch removes the need of these CONFIG_HAVE_CLK statements, by introducing
dummy routines when HAVE_CLK is not selected by platforms. So, definition of
these routines will always be available. These calls will return error for
platforms that don't select HAVE_CLK.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 include/linux/clk.h |  168 +++++++++++++++++++++++++++++++++------------------
 1 files changed, 109 insertions(+), 59 deletions(-)

diff --git a/include/linux/clk.h b/include/linux/clk.h
index 70cf722..9f84b68 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -84,6 +84,43 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
 #endif /* !CONFIG_COMMON_CLK */
 
 /**
+ * clk_prepare - prepare a clock source
+ * @clk: clock source
+ *
+ * This prepares the clock source for use.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+int clk_prepare(struct clk *clk);
+#else
+static inline int clk_prepare(struct clk *clk)
+{
+	might_sleep();
+	return 0;
+}
+#endif
+
+/**
+ * clk_unprepare - undo preparation of a clock source
+ * @clk: clock source
+ *
+ * This undoes a previously prepared clock.  The caller must balance
+ * the number of prepare and unprepare calls.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+void clk_unprepare(struct clk *clk);
+#else
+static inline void clk_unprepare(struct clk *clk)
+{
+	might_sleep();
+}
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+/**
  * clk_get - lookup and obtain a reference to a clock producer.
  * @dev: device for clock "consumer"
  * @id: clock comsumer ID
@@ -121,24 +158,6 @@ struct clk *clk_get(struct device *dev, const char *id);
 struct clk *devm_clk_get(struct device *dev, const char *id);
 
 /**
- * clk_prepare - prepare a clock source
- * @clk: clock source
- *
- * This prepares the clock source for use.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-int clk_prepare(struct clk *clk);
-#else
-static inline int clk_prepare(struct clk *clk)
-{
-	might_sleep();
-	return 0;
-}
-#endif
-
-/**
  * clk_enable - inform the system when the clock source should be running.
  * @clk: clock source
  *
@@ -166,47 +185,6 @@ int clk_enable(struct clk *clk);
  */
 void clk_disable(struct clk *clk);
 
-
-/**
- * clk_unprepare - undo preparation of a clock source
- * @clk: clock source
- *
- * This undoes a previously prepared clock.  The caller must balance
- * the number of prepare and unprepare calls.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-void clk_unprepare(struct clk *clk);
-#else
-static inline void clk_unprepare(struct clk *clk)
-{
-	might_sleep();
-}
-#endif
-
-/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
-static inline int clk_prepare_enable(struct clk *clk)
-{
-	int ret;
-
-	ret = clk_prepare(clk);
-	if (ret)
-		return ret;
-	ret = clk_enable(clk);
-	if (ret)
-		clk_unprepare(clk);
-
-	return ret;
-}
-
-/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
-static inline void clk_disable_unprepare(struct clk *clk)
-{
-	clk_disable(clk);
-	clk_unprepare(clk);
-}
-
 /**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
  *		  This is only valid once the clock source has been enabled.
@@ -297,6 +275,78 @@ struct clk *clk_get_parent(struct clk *clk);
  */
 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 
+#else /* !CONFIG_HAVE_CLK */
+
+static inline struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline void clk_put(struct clk *clk) {}
+
+static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
+
+static inline int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static inline void clk_disable(struct clk *clk) {}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+	return 0;
+}
+
+static inline int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+
+static inline struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+
+#endif
+
+/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
 /**
  * clk_add_alias - add a new clock alias
  * @alias: name for clock alias
-- 
1.7.9

[PATCH V3 Resend 02/12] clk: Remove redundant depends on from drivers/Kconfig

[Viresh Kumar]

menu "Common Clock Framework" has "depends on COMMON_CLK" and so configs defined
within menu don't require these "depends on COMMON_CLK again".

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 drivers/clk/Kconfig |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 165e1fe..4f10a21 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -24,7 +24,6 @@ menu "Common Clock Framework"
 
 config COMMON_CLK_DISABLE_UNUSED
 	bool "Disabled unused clocks at boot"
-	depends on COMMON_CLK
 	---help---
 	  Traverses the entire clock tree and disables any clocks that are
 	  enabled in hardware but have not been enabled by any device drivers.
@@ -35,7 +34,6 @@ config COMMON_CLK_DISABLE_UNUSED
 
 config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
-	depends on COMMON_CLK
 	select DEBUG_FS
 	---help---
 	  Creates a directory hierchy in debugfs for visualizing the clk
-- 
1.7.9

[PATCH V3 Resend 02/12] clk: Remove redundant depends on from drivers/Kconfig

[Viresh Kumar]

menu "Common Clock Framework" has "depends on COMMON_CLK" and so configs defined
within menu don't require these "depends on COMMON_CLK again".

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 drivers/clk/Kconfig |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 165e1fe..4f10a21 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -24,7 +24,6 @@ menu "Common Clock Framework"
 
 config COMMON_CLK_DISABLE_UNUSED
 	bool "Disabled unused clocks at boot"
-	depends on COMMON_CLK
 	---help---
 	  Traverses the entire clock tree and disables any clocks that are
 	  enabled in hardware but have not been enabled by any device drivers.
@@ -35,7 +34,6 @@ config COMMON_CLK_DISABLE_UNUSED
 
 config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
-	depends on COMMON_CLK
 	select DEBUG_FS
 	---help---
 	  Creates a directory hierchy in debugfs for visualizing the clk
-- 
1.7.9

[PATCH V3 Resend 03/12] i2c/i2c-pxa: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

pxa i2c also has these dummy macros defined locally. Remove them as they aren't
required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
---
 drivers/i2c/busses/i2c-pxa.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index a997c7d..1034d93 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -41,13 +41,6 @@
 
 #include <asm/irq.h>
 
-#ifndef CONFIG_HAVE_CLK
-#define clk_get(dev, id)	NULL
-#define clk_put(clk)		do { } while (0)
-#define clk_disable(clk)	do { } while (0)
-#define clk_enable(clk)		do { } while (0)
-#endif
-
 struct pxa_reg_layout {
 	u32 ibmr;
 	u32 idbr;
-- 
1.7.9

[PATCH V3 Resend 03/12] i2c/i2c-pxa: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

pxa i2c also has these dummy macros defined locally. Remove them as they aren't
required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
---
 drivers/i2c/busses/i2c-pxa.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index a997c7d..1034d93 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -41,13 +41,6 @@
 
 #include <asm/irq.h>
 
-#ifndef CONFIG_HAVE_CLK
-#define clk_get(dev, id)	NULL
-#define clk_put(clk)		do { } while (0)
-#define clk_disable(clk)	do { } while (0)
-#define clk_enable(clk)		do { } while (0)
-#endif
-
 struct pxa_reg_layout {
 	u32 ibmr;
 	u32 idbr;
-- 
1.7.9

[PATCH V3 Resend 03/12] i2c/i2c-pxa: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

pxa i2c also has these dummy macros defined locally. Remove them as they aren't
required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: linux-i2c at vger.kernel.org
---
 drivers/i2c/busses/i2c-pxa.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index a997c7d..1034d93 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -41,13 +41,6 @@
 
 #include <asm/irq.h>
 
-#ifndef CONFIG_HAVE_CLK
-#define clk_get(dev, id)	NULL
-#define clk_put(clk)		do { } while (0)
-#define clk_disable(clk)	do { } while (0)
-#define clk_enable(clk)		do { } while (0)
-#endif
-
 struct pxa_reg_layout {
 	u32 ibmr;
 	u32 idbr;
-- 
1.7.9

[PATCH V3 Resend 04/12] usb/marvell: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Marvell usb also has these dummy macros defined locally. Remove them as they
aren't required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
 include/linux/platform_data/mv_usb.h |    9 ---------
 1 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index d94804a..944b01d 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -52,13 +52,4 @@ struct mv_usb_platform_data {
 	int	(*set_vbus)(unsigned int vbus);
 	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
-
-#ifndef CONFIG_HAVE_CLK
-/* Dummy stub for clk framework */
-#define clk_get(dev, id)       NULL
-#define clk_put(clock)         do {} while (0)
-#define clk_enable(clock)      do {} while (0)
-#define clk_disable(clock)     do {} while (0)
-#endif
-
 #endif
-- 
1.7.9

[PATCH V3 Resend 04/12] usb/marvell: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Marvell usb also has these dummy macros defined locally. Remove them as they
aren't required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb at vger.kernel.org
---
 include/linux/platform_data/mv_usb.h |    9 ---------
 1 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index d94804a..944b01d 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -52,13 +52,4 @@ struct mv_usb_platform_data {
 	int	(*set_vbus)(unsigned int vbus);
 	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
-
-#ifndef CONFIG_HAVE_CLK
-/* Dummy stub for clk framework */
-#define clk_get(dev, id)       NULL
-#define clk_put(clock)         do {} while (0)
-#define clk_enable(clock)      do {} while (0)
-#define clk_disable(clock)     do {} while (0)
-#endif
-
 #endif
-- 
1.7.9

[PATCH V3 Resend 05/12] usb/musb: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

musb also has these dummy macros defined locally. Remove them as they aren't
required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
 drivers/usb/musb/musb_core.h |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f4a40f0..f7bc23f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -81,14 +81,6 @@ struct musb_ep;
 #define is_peripheral_active(m)		(!(m)->is_host)
 #define is_host_active(m)		((m)->is_host)
 
-#ifndef CONFIG_HAVE_CLK
-/* Dummy stub for clk framework */
-#define clk_get(dev, id)	NULL
-#define clk_put(clock)		do {} while (0)
-#define clk_enable(clock)	do {} while (0)
-#define clk_disable(clock)	do {} while (0)
-#endif
-
 #ifdef CONFIG_PROC_FS
 #include <linux/fs.h>
 #define MUSB_CONFIG_PROC_FS
-- 
1.7.9

[PATCH V3 Resend 05/12] usb/musb: Remove conditional compilation of clk code

[Viresh Kumar]

From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

musb also has these dummy macros defined locally. Remove them as they aren't
required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb at vger.kernel.org
---
 drivers/usb/musb/musb_core.h |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f4a40f0..f7bc23f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -81,14 +81,6 @@ struct musb_ep;
 #define is_peripheral_active(m)		(!(m)->is_host)
 #define is_host_active(m)		((m)->is_host)
 
-#ifndef CONFIG_HAVE_CLK
-/* Dummy stub for clk framework */
-#define clk_get(dev, id)	NULL
-#define clk_put(clock)		do {} while (0)
-#define clk_enable(clock)	do {} while (0)
-#define clk_disable(clock)	do {} while (0)
-#endif
-
 #ifdef CONFIG_PROC_FS
 #include <linux/fs.h>
 #define MUSB_CONFIG_PROC_FS
-- 
1.7.9

[PATCH V3 Resend 06/12] ata/pata_arasan: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide@vger.kernel.org
---
 drivers/ata/pata_arasan_cf.c |   14 +-------------
 1 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 3239517..b943be0 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -184,10 +184,8 @@
 struct arasan_cf_dev {
 	/* pointer to ata_host structure */
 	struct ata_host *host;
-	/* clk structure, only if HAVE_CLK is defined */
-#ifdef CONFIG_HAVE_CLK
+	/* clk structure */
 	struct clk *clk;
-#endif
 
 	/* physical base address of controller */
 	dma_addr_t pbase;
@@ -312,13 +310,11 @@ static int cf_init(struct arasan_cf_dev *acdev)
 	unsigned long flags;
 	int ret = 0;
 
-#ifdef CONFIG_HAVE_CLK
 	ret = clk_enable(acdev->clk);
 	if (ret) {
 		dev_dbg(acdev->host->dev, "clock enable failed");
 		return ret;
 	}
-#endif
 
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
@@ -344,9 +340,7 @@ static void cf_exit(struct arasan_cf_dev *acdev)
 	writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB,
 			acdev->vbase + OP_MODE);
 	spin_unlock_irqrestore(&acdev->host->lock, flags);
-#ifdef CONFIG_HAVE_CLK
 	clk_disable(acdev->clk);
-#endif
 }
 
 static void dma_callback(void *dev)
@@ -828,13 +822,11 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	acdev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(acdev->clk)) {
 		dev_warn(&pdev->dev, "Clock not found\n");
 		return PTR_ERR(acdev->clk);
 	}
-#endif
 
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
@@ -899,9 +891,7 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 			&arasan_cf_sht);
 
 free_clk:
-#ifdef CONFIG_HAVE_CLK
 	clk_put(acdev->clk);
-#endif
 	return ret;
 }
 
@@ -912,9 +902,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
 
 	ata_host_detach(host);
 	cf_exit(acdev);
-#ifdef CONFIG_HAVE_CLK
 	clk_put(acdev->clk);
-#endif
 
 	return 0;
 }
-- 
1.7.9

[PATCH V3 Resend 06/12] ata/pata_arasan: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide@vger.kernel.org
---
 drivers/ata/pata_arasan_cf.c |   14 +-------------
 1 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 3239517..b943be0 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -184,10 +184,8 @@
 struct arasan_cf_dev {
 	/* pointer to ata_host structure */
 	struct ata_host *host;
-	/* clk structure, only if HAVE_CLK is defined */
-#ifdef CONFIG_HAVE_CLK
+	/* clk structure */
 	struct clk *clk;
-#endif
 
 	/* physical base address of controller */
 	dma_addr_t pbase;
@@ -312,13 +310,11 @@ static int cf_init(struct arasan_cf_dev *acdev)
 	unsigned long flags;
 	int ret = 0;
 
-#ifdef CONFIG_HAVE_CLK
 	ret = clk_enable(acdev->clk);
 	if (ret) {
 		dev_dbg(acdev->host->dev, "clock enable failed");
 		return ret;
 	}
-#endif
 
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
@@ -344,9 +340,7 @@ static void cf_exit(struct arasan_cf_dev *acdev)
 	writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB,
 			acdev->vbase + OP_MODE);
 	spin_unlock_irqrestore(&acdev->host->lock, flags);
-#ifdef CONFIG_HAVE_CLK
 	clk_disable(acdev->clk);
-#endif
 }
 
 static void dma_callback(void *dev)
@@ -828,13 +822,11 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	acdev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(acdev->clk)) {
 		dev_warn(&pdev->dev, "Clock not found\n");
 		return PTR_ERR(acdev->clk);
 	}
-#endif
 
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
@@ -899,9 +891,7 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 			&arasan_cf_sht);
 
 free_clk:
-#ifdef CONFIG_HAVE_CLK
 	clk_put(acdev->clk);
-#endif
 	return ret;
 }
 
@@ -912,9 +902,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
 
 	ata_host_detach(host);
 	cf_exit(acdev);
-#ifdef CONFIG_HAVE_CLK
 	clk_put(acdev->clk);
-#endif
 
 	return 0;
 }
-- 
1.7.9

[PATCH V3 Resend 06/12] ata/pata_arasan: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide at vger.kernel.org
---
 drivers/ata/pata_arasan_cf.c |   14 +-------------
 1 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 3239517..b943be0 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -184,10 +184,8 @@
 struct arasan_cf_dev {
 	/* pointer to ata_host structure */
 	struct ata_host *host;
-	/* clk structure, only if HAVE_CLK is defined */
-#ifdef CONFIG_HAVE_CLK
+	/* clk structure */
 	struct clk *clk;
-#endif
 
 	/* physical base address of controller */
 	dma_addr_t pbase;
@@ -312,13 +310,11 @@ static int cf_init(struct arasan_cf_dev *acdev)
 	unsigned long flags;
 	int ret = 0;
 
-#ifdef CONFIG_HAVE_CLK
 	ret = clk_enable(acdev->clk);
 	if (ret) {
 		dev_dbg(acdev->host->dev, "clock enable failed");
 		return ret;
 	}
-#endif
 
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
@@ -344,9 +340,7 @@ static void cf_exit(struct arasan_cf_dev *acdev)
 	writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB,
 			acdev->vbase + OP_MODE);
 	spin_unlock_irqrestore(&acdev->host->lock, flags);
-#ifdef CONFIG_HAVE_CLK
 	clk_disable(acdev->clk);
-#endif
 }
 
 static void dma_callback(void *dev)
@@ -828,13 +822,11 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	acdev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(acdev->clk)) {
 		dev_warn(&pdev->dev, "Clock not found\n");
 		return PTR_ERR(acdev->clk);
 	}
-#endif
 
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
@@ -899,9 +891,7 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 			&arasan_cf_sht);
 
 free_clk:
-#ifdef CONFIG_HAVE_CLK
 	clk_put(acdev->clk);
-#endif
 	return ret;
 }
 
@@ -912,9 +902,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
 
 	ata_host_detach(host);
 	cf_exit(acdev);
-#ifdef CONFIG_HAVE_CLK
 	clk_put(acdev->clk);
-#endif
 
 	return 0;
 }
-- 
1.7.9

[PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide@vger.kernel.org
---
 drivers/ata/sata_mv.c |   10 ----------
 1 files changed, 0 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7336d4a..37503b8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -551,9 +551,7 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4063,13 +4061,11 @@ static int mv_platform_probe(struct platform_device *pdev)
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get clkdev\n");
 	else
 		clk_enable(hpriv->clk);
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4096,12 +4092,10 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-#endif
 
 	return rc;
 }
@@ -4117,17 +4111,13 @@ err:
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-#endif
 	return 0;
 }
 
-- 
1.7.9

[PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide@vger.kernel.org
---
 drivers/ata/sata_mv.c |   10 ----------
 1 files changed, 0 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7336d4a..37503b8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -551,9 +551,7 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4063,13 +4061,11 @@ static int mv_platform_probe(struct platform_device *pdev)
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get clkdev\n");
 	else
 		clk_enable(hpriv->clk);
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4096,12 +4092,10 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-#endif
 
 	return rc;
 }
@@ -4117,17 +4111,13 @@ err:
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-#endif
 	return 0;
 }
 
-- 
1.7.9

[PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide at vger.kernel.org
---
 drivers/ata/sata_mv.c |   10 ----------
 1 files changed, 0 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7336d4a..37503b8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -551,9 +551,7 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4063,13 +4061,11 @@ static int mv_platform_probe(struct platform_device *pdev)
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get clkdev\n");
 	else
 		clk_enable(hpriv->clk);
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4096,12 +4092,10 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-#endif
 
 	return rc;
 }
@@ -4117,17 +4111,13 @@ err:
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-#endif
 	return 0;
 }
 
-- 
1.7.9

[PATCH V3 Resend 08/12] net/c_can: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
---
 drivers/net/can/c_can/c_can_platform.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 5e1a5ff..7ec9316 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -73,7 +73,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 	struct c_can_priv *priv;
 	struct resource *mem;
 	int irq;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 
 	/* get the appropriate clk */
@@ -83,7 +82,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 		ret = -ENODEV;
 		goto exit;
 	}
-#endif
 
 	/* get the platform data */
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -118,10 +116,8 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 
 	dev->irq = irq;
 	priv->regs = addr;
-#ifdef CONFIG_HAVE_CLK
 	priv->can.clock.freq = clk_get_rate(clk);
 	priv->priv = clk;
-#endif
 
 	switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
 	case IORESOURCE_MEM_32BIT:
@@ -157,10 +153,8 @@ exit_iounmap:
 exit_release_mem:
 	release_mem_region(mem->start, resource_size(mem));
 exit_free_clk:
-#ifdef CONFIG_HAVE_CLK
 	clk_put(clk);
 exit:
-#endif
 	dev_err(&pdev->dev, "probe failed\n");
 
 	return ret;
@@ -181,9 +175,7 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, resource_size(mem));
 
-#ifdef CONFIG_HAVE_CLK
 	clk_put(priv->priv);
-#endif
 
 	return 0;
 }
-- 
1.7.9

[PATCH V3 Resend 08/12] net/c_can: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
---
 drivers/net/can/c_can/c_can_platform.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 5e1a5ff..7ec9316 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -73,7 +73,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 	struct c_can_priv *priv;
 	struct resource *mem;
 	int irq;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 
 	/* get the appropriate clk */
@@ -83,7 +82,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 		ret = -ENODEV;
 		goto exit;
 	}
-#endif
 
 	/* get the platform data */
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -118,10 +116,8 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 
 	dev->irq = irq;
 	priv->regs = addr;
-#ifdef CONFIG_HAVE_CLK
 	priv->can.clock.freq = clk_get_rate(clk);
 	priv->priv = clk;
-#endif
 
 	switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
 	case IORESOURCE_MEM_32BIT:
@@ -157,10 +153,8 @@ exit_iounmap:
 exit_release_mem:
 	release_mem_region(mem->start, resource_size(mem));
 exit_free_clk:
-#ifdef CONFIG_HAVE_CLK
 	clk_put(clk);
 exit:
-#endif
 	dev_err(&pdev->dev, "probe failed\n");
 
 	return ret;
@@ -181,9 +175,7 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, resource_size(mem));
 
-#ifdef CONFIG_HAVE_CLK
 	clk_put(priv->priv);
-#endif
 
 	return 0;
 }
-- 
1.7.9

[PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

This also fixes error paths of probe(), as a goto is required in this patch.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |   41 ---------------------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   33 +++++++++--------
 2 files changed, 17 insertions(+), 57 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index db2de9a..7f85895 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -81,9 +81,7 @@ struct stmmac_priv {
 	struct stmmac_counters mmc;
 	struct dma_features dma_cap;
 	int hw_cap_support;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *stmmac_clk;
-#endif
 	int clk_csr;
 };
 
@@ -103,42 +101,3 @@ int stmmac_dvr_remove(struct net_device *ndev);
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 				     struct plat_stmmacenet_data *plat_dat,
 				     void __iomem *addr);
-
-#ifdef CONFIG_HAVE_CLK
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
-	if (!IS_ERR(priv->stmmac_clk))
-		return clk_enable(priv->stmmac_clk);
-
-	return 0;
-}
-
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-	if (IS_ERR(priv->stmmac_clk))
-		return;
-
-	clk_disable(priv->stmmac_clk);
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
-	priv->stmmac_clk = clk_get(priv->device, NULL);
-
-	if (IS_ERR(priv->stmmac_clk))
-		return PTR_ERR(priv->stmmac_clk);
-
-	return 0;
-}
-#else
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
-	return 0;
-}
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
-	return 0;
-}
-#endif /* CONFIG_HAVE_CLK */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1a4cf81..bbdcb55 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -28,6 +28,7 @@
 	https://bugzilla.stlinux.com/
 *******************************************************************************/
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/ip.h>
@@ -165,12 +166,8 @@ static void stmmac_verify_args(void)
 
 static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 {
-#ifdef CONFIG_HAVE_CLK
 	u32 clk_rate;
 
-	if (IS_ERR(priv->stmmac_clk))
-		return;
-
 	clk_rate = clk_get_rate(priv->stmmac_clk);
 
 	/* Platform provided default clk_csr would be assumed valid
@@ -192,7 +189,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 	   * we can not estimate the proper divider as it is not known
 	   * the frequency of clk_csr_i. So we do not change the default
 	   * divider. */
-#endif
 }
 
 #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
@@ -971,7 +967,7 @@ static int stmmac_open(struct net_device *dev)
 	} else
 		priv->tm->enable = 1;
 #endif
-	stmmac_clk_enable(priv);
+	clk_enable(priv->stmmac_clk);
 
 	stmmac_check_ether_addr(priv);
 
@@ -1075,7 +1071,7 @@ open_error:
 	if (priv->phydev)
 		phy_disconnect(priv->phydev);
 
-	stmmac_clk_disable(priv);
+	clk_disable(priv->stmmac_clk);
 
 	return ret;
 }
@@ -1128,7 +1124,7 @@ static int stmmac_release(struct net_device *dev)
 #ifdef CONFIG_STMMAC_DEBUG_FS
 	stmmac_exit_fs();
 #endif
-	stmmac_clk_disable(priv);
+	clk_disable(priv->stmmac_clk);
 
 	return 0;
 }
@@ -1922,11 +1918,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 	ret = register_netdev(ndev);
 	if (ret) {
 		pr_err("%s: ERROR %i registering the device\n", __func__, ret);
-		goto error;
+		goto error_netdev_register;
 	}
 
-	if (stmmac_clk_get(priv))
+	priv->stmmac_clk = clk_get(priv->device, NULL);
+	if (IS_ERR(priv->stmmac_clk)) {
 		pr_warning("%s: warning: cannot get CSR clock\n", __func__);
+		goto error_clk_get;
+	}
 
 	/* If a specific clk_csr value is passed from the platform
 	 * this means that the CSR Clock Range selection cannot be
@@ -1944,15 +1943,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 	if (ret < 0) {
 		pr_debug("%s: MDIO bus (id: %d) registration failed",
 			 __func__, priv->plat->bus_id);
-		goto error;
+		goto error_mdio_register;
 	}
 
 	return priv;
 
-error:
-	netif_napi_del(&priv->napi);
-
+error_mdio_register:
+	clk_put(priv->stmmac_clk);
+error_clk_get:
 	unregister_netdev(ndev);
+error_netdev_register:
+	netif_napi_del(&priv->napi);
 	free_netdev(ndev);
 
 	return NULL;
@@ -2020,7 +2021,7 @@ int stmmac_suspend(struct net_device *ndev)
 	else {
 		stmmac_set_mac(priv->ioaddr, false);
 		/* Disable clock in case of PWM is off */
-		stmmac_clk_disable(priv);
+		clk_disable(priv->stmmac_clk);
 	}
 	spin_unlock(&priv->lock);
 	return 0;
@@ -2044,7 +2045,7 @@ int stmmac_resume(struct net_device *ndev)
 		priv->hw->mac->pmt(priv->ioaddr, 0);
 	else
 		/* enable the clk prevously disabled */
-		stmmac_clk_enable(priv);
+		clk_enable(priv->stmmac_clk);
 
 	netif_device_attach(ndev);
 
-- 
1.7.9

[PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

This also fixes error paths of probe(), as a goto is required in this patch.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev at vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |   41 ---------------------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   33 +++++++++--------
 2 files changed, 17 insertions(+), 57 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index db2de9a..7f85895 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -81,9 +81,7 @@ struct stmmac_priv {
 	struct stmmac_counters mmc;
 	struct dma_features dma_cap;
 	int hw_cap_support;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *stmmac_clk;
-#endif
 	int clk_csr;
 };
 
@@ -103,42 +101,3 @@ int stmmac_dvr_remove(struct net_device *ndev);
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 				     struct plat_stmmacenet_data *plat_dat,
 				     void __iomem *addr);
-
-#ifdef CONFIG_HAVE_CLK
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
-	if (!IS_ERR(priv->stmmac_clk))
-		return clk_enable(priv->stmmac_clk);
-
-	return 0;
-}
-
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-	if (IS_ERR(priv->stmmac_clk))
-		return;
-
-	clk_disable(priv->stmmac_clk);
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
-	priv->stmmac_clk = clk_get(priv->device, NULL);
-
-	if (IS_ERR(priv->stmmac_clk))
-		return PTR_ERR(priv->stmmac_clk);
-
-	return 0;
-}
-#else
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
-	return 0;
-}
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
-	return 0;
-}
-#endif /* CONFIG_HAVE_CLK */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1a4cf81..bbdcb55 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -28,6 +28,7 @@
 	https://bugzilla.stlinux.com/
 *******************************************************************************/
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/ip.h>
@@ -165,12 +166,8 @@ static void stmmac_verify_args(void)
 
 static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 {
-#ifdef CONFIG_HAVE_CLK
 	u32 clk_rate;
 
-	if (IS_ERR(priv->stmmac_clk))
-		return;
-
 	clk_rate = clk_get_rate(priv->stmmac_clk);
 
 	/* Platform provided default clk_csr would be assumed valid
@@ -192,7 +189,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 	   * we can not estimate the proper divider as it is not known
 	   * the frequency of clk_csr_i. So we do not change the default
 	   * divider. */
-#endif
 }
 
 #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
@@ -971,7 +967,7 @@ static int stmmac_open(struct net_device *dev)
 	} else
 		priv->tm->enable = 1;
 #endif
-	stmmac_clk_enable(priv);
+	clk_enable(priv->stmmac_clk);
 
 	stmmac_check_ether_addr(priv);
 
@@ -1075,7 +1071,7 @@ open_error:
 	if (priv->phydev)
 		phy_disconnect(priv->phydev);
 
-	stmmac_clk_disable(priv);
+	clk_disable(priv->stmmac_clk);
 
 	return ret;
 }
@@ -1128,7 +1124,7 @@ static int stmmac_release(struct net_device *dev)
 #ifdef CONFIG_STMMAC_DEBUG_FS
 	stmmac_exit_fs();
 #endif
-	stmmac_clk_disable(priv);
+	clk_disable(priv->stmmac_clk);
 
 	return 0;
 }
@@ -1922,11 +1918,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 	ret = register_netdev(ndev);
 	if (ret) {
 		pr_err("%s: ERROR %i registering the device\n", __func__, ret);
-		goto error;
+		goto error_netdev_register;
 	}
 
-	if (stmmac_clk_get(priv))
+	priv->stmmac_clk = clk_get(priv->device, NULL);
+	if (IS_ERR(priv->stmmac_clk)) {
 		pr_warning("%s: warning: cannot get CSR clock\n", __func__);
+		goto error_clk_get;
+	}
 
 	/* If a specific clk_csr value is passed from the platform
 	 * this means that the CSR Clock Range selection cannot be
@@ -1944,15 +1943,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 	if (ret < 0) {
 		pr_debug("%s: MDIO bus (id: %d) registration failed",
 			 __func__, priv->plat->bus_id);
-		goto error;
+		goto error_mdio_register;
 	}
 
 	return priv;
 
-error:
-	netif_napi_del(&priv->napi);
-
+error_mdio_register:
+	clk_put(priv->stmmac_clk);
+error_clk_get:
 	unregister_netdev(ndev);
+error_netdev_register:
+	netif_napi_del(&priv->napi);
 	free_netdev(ndev);
 
 	return NULL;
@@ -2020,7 +2021,7 @@ int stmmac_suspend(struct net_device *ndev)
 	else {
 		stmmac_set_mac(priv->ioaddr, false);
 		/* Disable clock in case of PWM is off */
-		stmmac_clk_disable(priv);
+		clk_disable(priv->stmmac_clk);
 	}
 	spin_unlock(&priv->lock);
 	return 0;
@@ -2044,7 +2045,7 @@ int stmmac_resume(struct net_device *ndev)
 		priv->hw->mac->pmt(priv->ioaddr, 0);
 	else
 		/* enable the clk prevously disabled */
-		stmmac_clk_enable(priv);
+		clk_enable(priv->stmmac_clk);
 
 	netif_device_attach(ndev);
 
-- 
1.7.9

[PATCH V3 Resend 10/12] gadget/m66592: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
 drivers/usb/gadget/m66592-udc.c |    9 +--------
 drivers/usb/gadget/m66592-udc.h |    5 -----
 2 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 3608b3b..51c24d2 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1583,12 +1583,10 @@ static int __exit m66592_remove(struct platform_device *pdev)
 	iounmap(m66592->reg);
 	free_irq(platform_get_irq(pdev, 0), m66592);
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
-#ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
 		clk_disable(m66592->clk);
 		clk_put(m66592->clk);
 	}
-#endif
 	kfree(m66592);
 	return 0;
 }
@@ -1602,9 +1600,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 	struct resource *res, *ires;
 	void __iomem *reg = NULL;
 	struct m66592 *m66592 = NULL;
-#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
-#endif
 	int ret = 0;
 	int i;
 
@@ -1671,7 +1667,6 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
 		m66592->clk = clk_get(&pdev->dev, clk_name);
@@ -1683,7 +1678,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 		}
 		clk_enable(m66592->clk);
 	}
-#endif
+
 	INIT_LIST_HEAD(&m66592->gadget.ep_list);
 	m66592->gadget.ep0 = &m66592->ep[0].ep;
 	INIT_LIST_HEAD(&m66592->gadget.ep0->ep_list);
@@ -1731,13 +1726,11 @@ err_add_udc:
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
 
 clean_up3:
-#ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
 		clk_disable(m66592->clk);
 		clk_put(m66592->clk);
 	}
 clean_up2:
-#endif
 	free_irq(ires->start, m66592);
 clean_up:
 	if (m66592) {
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 9d9f7e3..a044ad3 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -13,10 +13,7 @@
 #ifndef __M66592_UDC_H__
 #define __M66592_UDC_H__
 
-#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
-#endif
-
 #include <linux/usb/m66592.h>
 
 #define M66592_SYSCFG		0x00
@@ -468,9 +465,7 @@ struct m66592_ep {
 struct m66592 {
 	spinlock_t		lock;
 	void __iomem		*reg;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
-#endif
 	struct m66592_platdata	*pdata;
 	unsigned long		irq_trigger;
 
-- 
1.7.9

[PATCH V3 Resend 10/12] gadget/m66592: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb at vger.kernel.org
---
 drivers/usb/gadget/m66592-udc.c |    9 +--------
 drivers/usb/gadget/m66592-udc.h |    5 -----
 2 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 3608b3b..51c24d2 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1583,12 +1583,10 @@ static int __exit m66592_remove(struct platform_device *pdev)
 	iounmap(m66592->reg);
 	free_irq(platform_get_irq(pdev, 0), m66592);
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
-#ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
 		clk_disable(m66592->clk);
 		clk_put(m66592->clk);
 	}
-#endif
 	kfree(m66592);
 	return 0;
 }
@@ -1602,9 +1600,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 	struct resource *res, *ires;
 	void __iomem *reg = NULL;
 	struct m66592 *m66592 = NULL;
-#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
-#endif
 	int ret = 0;
 	int i;
 
@@ -1671,7 +1667,6 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
 		m66592->clk = clk_get(&pdev->dev, clk_name);
@@ -1683,7 +1678,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 		}
 		clk_enable(m66592->clk);
 	}
-#endif
+
 	INIT_LIST_HEAD(&m66592->gadget.ep_list);
 	m66592->gadget.ep0 = &m66592->ep[0].ep;
 	INIT_LIST_HEAD(&m66592->gadget.ep0->ep_list);
@@ -1731,13 +1726,11 @@ err_add_udc:
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
 
 clean_up3:
-#ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
 		clk_disable(m66592->clk);
 		clk_put(m66592->clk);
 	}
 clean_up2:
-#endif
 	free_irq(ires->start, m66592);
 clean_up:
 	if (m66592) {
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 9d9f7e3..a044ad3 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -13,10 +13,7 @@
 #ifndef __M66592_UDC_H__
 #define __M66592_UDC_H__
 
-#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
-#endif
-
 #include <linux/usb/m66592.h>
 
 #define M66592_SYSCFG		0x00
@@ -468,9 +465,7 @@ struct m66592_ep {
 struct m66592 {
 	spinlock_t		lock;
 	void __iomem		*reg;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
-#endif
 	struct m66592_platdata	*pdata;
 	unsigned long		irq_trigger;
 
-- 
1.7.9

[PATCH V3 Resend 11/12] gadget/r8a66597: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
 drivers/usb/gadget/r8a66597-udc.c |   11 +++--------
 drivers/usb/gadget/r8a66597-udc.h |    5 -----
 2 files changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index c4401e7..f873023 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1818,12 +1818,12 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 		iounmap(r8a66597->sudmac_reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-#ifdef CONFIG_HAVE_CLK
+
 	if (r8a66597->pdata->on_chip) {
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
-#endif
+
 	device_unregister(&r8a66597->gadget.dev);
 	kfree(r8a66597);
 	return 0;
@@ -1855,9 +1855,7 @@ static int __init r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597,
 
 static int __init r8a66597_probe(struct platform_device *pdev)
 {
-#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
-#endif
 	struct resource *res, *ires;
 	int irq;
 	void __iomem *reg = NULL;
@@ -1921,7 +1919,6 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597->timer.data = (unsigned long)r8a66597;
 	r8a66597->reg = reg;
 
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
 		r8a66597->clk = clk_get(&pdev->dev, clk_name);
@@ -1933,7 +1930,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 		}
 		clk_enable(r8a66597->clk);
 	}
-#endif
+
 	if (r8a66597->pdata->sudmac) {
 		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
 		if (ret < 0)
@@ -1993,13 +1990,11 @@ err_add_udc:
 clean_up3:
 	free_irq(irq, r8a66597);
 clean_up2:
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
 clean_up_dev:
-#endif
 	device_unregister(&r8a66597->gadget.dev);
 clean_up:
 	if (r8a66597) {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 8e3de61..d2a5ad2 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -13,10 +13,7 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
-#endif
-
 #include <linux/usb/r8a66597.h>
 
 #define R8A66597_MAX_SAMPLING	10
@@ -92,9 +89,7 @@ struct r8a66597 {
 	void __iomem		*reg;
 	void __iomem		*sudmac_reg;
 
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
-#endif
 	struct r8a66597_platdata	*pdata;
 
 	struct usb_gadget		gadget;
-- 
1.7.9

[PATCH V3 Resend 11/12] gadget/r8a66597: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb at vger.kernel.org
---
 drivers/usb/gadget/r8a66597-udc.c |   11 +++--------
 drivers/usb/gadget/r8a66597-udc.h |    5 -----
 2 files changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index c4401e7..f873023 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1818,12 +1818,12 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 		iounmap(r8a66597->sudmac_reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-#ifdef CONFIG_HAVE_CLK
+
 	if (r8a66597->pdata->on_chip) {
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
-#endif
+
 	device_unregister(&r8a66597->gadget.dev);
 	kfree(r8a66597);
 	return 0;
@@ -1855,9 +1855,7 @@ static int __init r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597,
 
 static int __init r8a66597_probe(struct platform_device *pdev)
 {
-#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
-#endif
 	struct resource *res, *ires;
 	int irq;
 	void __iomem *reg = NULL;
@@ -1921,7 +1919,6 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597->timer.data = (unsigned long)r8a66597;
 	r8a66597->reg = reg;
 
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
 		r8a66597->clk = clk_get(&pdev->dev, clk_name);
@@ -1933,7 +1930,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 		}
 		clk_enable(r8a66597->clk);
 	}
-#endif
+
 	if (r8a66597->pdata->sudmac) {
 		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
 		if (ret < 0)
@@ -1993,13 +1990,11 @@ err_add_udc:
 clean_up3:
 	free_irq(irq, r8a66597);
 clean_up2:
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
 clean_up_dev:
-#endif
 	device_unregister(&r8a66597->gadget.dev);
 clean_up:
 	if (r8a66597) {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 8e3de61..d2a5ad2 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -13,10 +13,7 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
-#endif
-
 #include <linux/usb/r8a66597.h>
 
 #define R8A66597_MAX_SAMPLING	10
@@ -92,9 +89,7 @@ struct r8a66597 {
 	void __iomem		*reg;
 	void __iomem		*sudmac_reg;
 
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
-#endif
 	struct r8a66597_platdata	*pdata;
 
 	struct usb_gadget		gadget;
-- 
1.7.9

[PATCH V3 Resend 12/12] usb/host/r8a66597: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
 drivers/usb/host/r8a66597-hcd.c |   12 ------------
 drivers/usb/host/r8a66597.h     |    5 -----
 2 files changed, 0 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index c868be6..4c634eb 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -95,9 +95,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	int i = 0;
 
 	if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
 		clk_enable(r8a66597->clk);
-#endif
 		do {
 			r8a66597_write(r8a66597, SCKE, SYSCFG0);
 			tmp = r8a66597_read(r8a66597, SYSCFG0);
@@ -141,9 +139,7 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 	udelay(1);
 
 	if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
 		clk_disable(r8a66597->clk);
-#endif
 	} else {
 		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
 		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
@@ -2406,19 +2402,15 @@ static int __devexit r8a66597_remove(struct platform_device *pdev)
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap(r8a66597->reg);
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
-#endif
 	usb_put_hcd(hcd);
 	return 0;
 }
 
 static int __devinit r8a66597_probe(struct platform_device *pdev)
 {
-#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
-#endif
 	struct resource *res = NULL, *ires;
 	int irq = -1;
 	void __iomem *reg = NULL;
@@ -2482,7 +2474,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 	if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
 		r8a66597->clk = clk_get(&pdev->dev, clk_name);
 		if (IS_ERR(r8a66597->clk)) {
@@ -2491,7 +2482,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 			ret = PTR_ERR(r8a66597->clk);
 			goto clean_up2;
 		}
-#endif
 		r8a66597->max_root_hub = 1;
 	} else
 		r8a66597->max_root_hub = 2;
@@ -2531,11 +2521,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	return 0;
 
 clean_up3:
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
 clean_up2:
-#endif
 	usb_put_hcd(hcd);
 
 clean_up:
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f28782d..672cea3 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,10 +26,7 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
-#endif
-
 #include <linux/usb/r8a66597.h>
 
 #define R8A66597_MAX_NUM_PIPE		10
@@ -113,9 +110,7 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	void __iomem *reg;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
-#endif
 	struct r8a66597_platdata	*pdata;
 	struct r8a66597_device		device0;
 	struct r8a66597_root_hub	root_hub[R8A66597_MAX_ROOT_HUB];
-- 
1.7.9

[PATCH V3 Resend 12/12] usb/host/r8a66597: Remove conditional compilation of clk code

[Viresh Kumar]

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb at vger.kernel.org
---
 drivers/usb/host/r8a66597-hcd.c |   12 ------------
 drivers/usb/host/r8a66597.h     |    5 -----
 2 files changed, 0 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index c868be6..4c634eb 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -95,9 +95,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	int i = 0;
 
 	if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
 		clk_enable(r8a66597->clk);
-#endif
 		do {
 			r8a66597_write(r8a66597, SCKE, SYSCFG0);
 			tmp = r8a66597_read(r8a66597, SYSCFG0);
@@ -141,9 +139,7 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 	udelay(1);
 
 	if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
 		clk_disable(r8a66597->clk);
-#endif
 	} else {
 		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
 		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
@@ -2406,19 +2402,15 @@ static int __devexit r8a66597_remove(struct platform_device *pdev)
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap(r8a66597->reg);
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
-#endif
 	usb_put_hcd(hcd);
 	return 0;
 }
 
 static int __devinit r8a66597_probe(struct platform_device *pdev)
 {
-#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
-#endif
 	struct resource *res = NULL, *ires;
 	int irq = -1;
 	void __iomem *reg = NULL;
@@ -2482,7 +2474,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 	if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
 		r8a66597->clk = clk_get(&pdev->dev, clk_name);
 		if (IS_ERR(r8a66597->clk)) {
@@ -2491,7 +2482,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 			ret = PTR_ERR(r8a66597->clk);
 			goto clean_up2;
 		}
-#endif
 		r8a66597->max_root_hub = 1;
 	} else
 		r8a66597->max_root_hub = 2;
@@ -2531,11 +2521,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	return 0;
 
 clean_up3:
-#ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
 clean_up2:
-#endif
 	usb_put_hcd(hcd);
 
 clean_up:
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f28782d..672cea3 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,10 +26,7 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
-#endif
-
 #include <linux/usb/r8a66597.h>
 
 #define R8A66597_MAX_NUM_PIPE		10
@@ -113,9 +110,7 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	void __iomem *reg;
-#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
-#endif
 	struct r8a66597_platdata	*pdata;
 	struct r8a66597_device		device0;
 	struct r8a66597_root_hub	root_hub[R8A66597_MAX_ROOT_HUB];
-- 
1.7.9

Re: [PATCH V3 Resend 08/12] net/c_can: Remove conditional compilation of clk code

[David Miller]

From: Viresh Kumar <viresh.kumar@st.com>
Date: Tue, 8 May 2012 09:22:35 +0530

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

Acked-by: David S. Miller <davem@davemloft.net>

[PATCH V3 Resend 08/12] net/c_can: Remove conditional compilation of clk code

[David Miller]

From: Viresh Kumar <viresh.kumar@st.com>
Date: Tue, 8 May 2012 09:22:35 +0530

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

Acked-by: David S. Miller <davem@davemloft.net>

Re: [PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code

[David Miller]

From: Viresh Kumar <viresh.kumar@st.com>
Date: Tue, 8 May 2012 09:22:36 +0530

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.
> 
> This also fixes error paths of probe(), as a goto is required in this patch.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

Acked-by: David S. Miller <davem@davemloft.net>

Re: [PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code

[David Miller]

From: Viresh Kumar <viresh.kumar@st.com>
Date: Tue, 8 May 2012 09:22:36 +0530

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.
> 
> This also fixes error paths of probe(), as a goto is required in this patch.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

Acked-by: David S. Miller <davem@davemloft.net>

[PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code

[David Miller]

From: Viresh Kumar <viresh.kumar@st.com>
Date: Tue, 8 May 2012 09:22:36 +0530

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.
> 
> This also fixes error paths of probe(), as a goto is required in this patch.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

Acked-by: David S. Miller <davem@davemloft.net>

Re: [PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code

[Andrew Morton]

On Tue, 8 May 2012 09:22:34 +0530
Viresh Kumar <viresh.kumar@st.com> wrote:

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.

There have been significant changes to drivers/ata/sata_mv.c in
linux-next so I have reworked the patch as below.

I notice that with x86_64 allmodconfig (CONFIG_HAVE_CLK=n), this patch
adds quite a lot of program text:

   text    data     bss     dec     hex filename
  26926    2657    7648   37231    916f drivers/ata/sata_mv.o
  27528    2657    7832   38017    9481 drivers/ata/sata_mv.o

This is an unacceptable increase for a purely cosmetic change!

For some reason,
ata-pata_arasan-remove-conditional-compilation-of-clk-code.patch
shrinks drivers/ata/pata_arasan_cf.o by 60 bytes, so that's good.

drivers/net/can/c_can/c_can_platform.o got 18 bytes bigger, which we
can live with.



I checked a few other patches and didn't see similar code bloat.

I note that usb-musb-remove-conditional-compilation-of-clk-code.patch
accidentally fixed the build of drivers/usb/musb/ux500.c.  In the
mainline kernel I get

drivers/usb/musb/ux500.c: In function 'ux500_probe':
drivers/usb/musb/ux500.c:89: error: expected expression before 'do'
drivers/usb/musb/ux500.c: In function 'ux500_resume':
drivers/usb/musb/ux500.c:175: error: expected expression before 'do'

possibly because this driver isn't supposed to be built with x86_64
allmodconfig, but someone obviously has a borked clk_enable()
definition.  drivers/usb/gadget/pxa25x_udc.c does it wrongly.

Anyway, I will drop
ata-sata_mv-remove-conditional-compilation-of-clk-code.patch - please
grab current linux-next and see what we can do about the code size
issue?

Thanks.


From: Viresh Kumar <viresh.kumar@st.com>
Subject: ata/sata_mv: remove conditional compilation of clk code

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/ata/sata_mv.c |   14 --------------
 1 file changed, 14 deletions(-)

diff -puN drivers/ata/sata_mv.c~ata-sata_mv-remove-conditional-compilation-of-clk-code drivers/ata/sata_mv.c
--- a/drivers/ata/sata_mv.c~ata-sata_mv-remove-conditional-compilation-of-clk-code
+++ a/drivers/ata/sata_mv.c
@@ -551,10 +551,8 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
 	struct clk              **port_clks;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4028,9 +4026,7 @@ static int mv_platform_probe(struct plat
 	struct resource *res;
 	int n_ports = 0;
 	int rc;
-#if defined(CONFIG_HAVE_CLK)
 	int port;
-#endif
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
@@ -4058,13 +4054,11 @@ static int mv_platform_probe(struct plat
 
 	if (!host || !hpriv)
 		return -ENOMEM;
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->port_clks = devm_kzalloc(&pdev->dev,
 					sizeof(struct clk *) * n_ports,
 					GFP_KERNEL);
 	if (!hpriv->port_clks)
 		return -ENOMEM;
-#endif
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
@@ -4074,7 +4068,6 @@ static int mv_platform_probe(struct plat
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
@@ -4088,7 +4081,6 @@ static int mv_platform_probe(struct plat
 		if (!IS_ERR(hpriv->port_clks[port]))
 			clk_prepare_enable(hpriv->port_clks[port]);
 	}
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4115,7 +4107,6 @@ static int mv_platform_probe(struct plat
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4126,7 +4117,6 @@ err:
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 
 	return rc;
 }
@@ -4142,13 +4132,10 @@ err:
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
 	int port;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4159,7 +4146,6 @@ static int __devexit mv_platform_remove(
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 	return 0;
 }
 
_

Re: [PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code

[Andrew Morton]

On Tue, 8 May 2012 09:22:34 +0530
Viresh Kumar <viresh.kumar@st.com> wrote:

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.

There have been significant changes to drivers/ata/sata_mv.c in
linux-next so I have reworked the patch as below.

I notice that with x86_64 allmodconfig (CONFIG_HAVE_CLK=n), this patch
adds quite a lot of program text:

   text    data     bss     dec     hex filename
  26926    2657    7648   37231    916f drivers/ata/sata_mv.o
  27528    2657    7832   38017    9481 drivers/ata/sata_mv.o

This is an unacceptable increase for a purely cosmetic change!

For some reason,
ata-pata_arasan-remove-conditional-compilation-of-clk-code.patch
shrinks drivers/ata/pata_arasan_cf.o by 60 bytes, so that's good.

drivers/net/can/c_can/c_can_platform.o got 18 bytes bigger, which we
can live with.



I checked a few other patches and didn't see similar code bloat.

I note that usb-musb-remove-conditional-compilation-of-clk-code.patch
accidentally fixed the build of drivers/usb/musb/ux500.c.  In the
mainline kernel I get

drivers/usb/musb/ux500.c: In function 'ux500_probe':
drivers/usb/musb/ux500.c:89: error: expected expression before 'do'
drivers/usb/musb/ux500.c: In function 'ux500_resume':
drivers/usb/musb/ux500.c:175: error: expected expression before 'do'

possibly because this driver isn't supposed to be built with x86_64
allmodconfig, but someone obviously has a borked clk_enable()
definition.  drivers/usb/gadget/pxa25x_udc.c does it wrongly.

Anyway, I will drop
ata-sata_mv-remove-conditional-compilation-of-clk-code.patch - please
grab current linux-next and see what we can do about the code size
issue?

Thanks.


From: Viresh Kumar <viresh.kumar@st.com>
Subject: ata/sata_mv: remove conditional compilation of clk code

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/ata/sata_mv.c |   14 --------------
 1 file changed, 14 deletions(-)

diff -puN drivers/ata/sata_mv.c~ata-sata_mv-remove-conditional-compilation-of-clk-code drivers/ata/sata_mv.c
--- a/drivers/ata/sata_mv.c~ata-sata_mv-remove-conditional-compilation-of-clk-code
+++ a/drivers/ata/sata_mv.c
@@ -551,10 +551,8 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
 	struct clk              **port_clks;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4028,9 +4026,7 @@ static int mv_platform_probe(struct plat
 	struct resource *res;
 	int n_ports = 0;
 	int rc;
-#if defined(CONFIG_HAVE_CLK)
 	int port;
-#endif
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
@@ -4058,13 +4054,11 @@ static int mv_platform_probe(struct plat
 
 	if (!host || !hpriv)
 		return -ENOMEM;
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->port_clks = devm_kzalloc(&pdev->dev,
 					sizeof(struct clk *) * n_ports,
 					GFP_KERNEL);
 	if (!hpriv->port_clks)
 		return -ENOMEM;
-#endif
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
@@ -4074,7 +4068,6 @@ static int mv_platform_probe(struct plat
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
@@ -4088,7 +4081,6 @@ static int mv_platform_probe(struct plat
 		if (!IS_ERR(hpriv->port_clks[port]))
 			clk_prepare_enable(hpriv->port_clks[port]);
 	}
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4115,7 +4107,6 @@ static int mv_platform_probe(struct plat
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4126,7 +4117,6 @@ err:
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 
 	return rc;
 }
@@ -4142,13 +4132,10 @@ err:
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
 	int port;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4159,7 +4146,6 @@ static int __devexit mv_platform_remove(
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 	return 0;
 }
 
_

[PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code

[Andrew Morton]

On Tue, 8 May 2012 09:22:34 +0530
Viresh Kumar <viresh.kumar@st.com> wrote:

> With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
> there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
> macros.

There have been significant changes to drivers/ata/sata_mv.c in
linux-next so I have reworked the patch as below.

I notice that with x86_64 allmodconfig (CONFIG_HAVE_CLK=n), this patch
adds quite a lot of program text:

   text    data     bss     dec     hex filename
  26926    2657    7648   37231    916f drivers/ata/sata_mv.o
  27528    2657    7832   38017    9481 drivers/ata/sata_mv.o

This is an unacceptable increase for a purely cosmetic change!

For some reason,
ata-pata_arasan-remove-conditional-compilation-of-clk-code.patch
shrinks drivers/ata/pata_arasan_cf.o by 60 bytes, so that's good.

drivers/net/can/c_can/c_can_platform.o got 18 bytes bigger, which we
can live with.



I checked a few other patches and didn't see similar code bloat.

I note that usb-musb-remove-conditional-compilation-of-clk-code.patch
accidentally fixed the build of drivers/usb/musb/ux500.c.  In the
mainline kernel I get

drivers/usb/musb/ux500.c: In function 'ux500_probe':
drivers/usb/musb/ux500.c:89: error: expected expression before 'do'
drivers/usb/musb/ux500.c: In function 'ux500_resume':
drivers/usb/musb/ux500.c:175: error: expected expression before 'do'

possibly because this driver isn't supposed to be built with x86_64
allmodconfig, but someone obviously has a borked clk_enable()
definition.  drivers/usb/gadget/pxa25x_udc.c does it wrongly.

Anyway, I will drop
ata-sata_mv-remove-conditional-compilation-of-clk-code.patch - please
grab current linux-next and see what we can do about the code size
issue?

Thanks.


From: Viresh Kumar <viresh.kumar@st.com>
Subject: ata/sata_mv: remove conditional compilation of clk code

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/ata/sata_mv.c |   14 --------------
 1 file changed, 14 deletions(-)

diff -puN drivers/ata/sata_mv.c~ata-sata_mv-remove-conditional-compilation-of-clk-code drivers/ata/sata_mv.c
--- a/drivers/ata/sata_mv.c~ata-sata_mv-remove-conditional-compilation-of-clk-code
+++ a/drivers/ata/sata_mv.c
@@ -551,10 +551,8 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
 	struct clk              **port_clks;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4028,9 +4026,7 @@ static int mv_platform_probe(struct plat
 	struct resource *res;
 	int n_ports = 0;
 	int rc;
-#if defined(CONFIG_HAVE_CLK)
 	int port;
-#endif
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
@@ -4058,13 +4054,11 @@ static int mv_platform_probe(struct plat
 
 	if (!host || !hpriv)
 		return -ENOMEM;
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->port_clks = devm_kzalloc(&pdev->dev,
 					sizeof(struct clk *) * n_ports,
 					GFP_KERNEL);
 	if (!hpriv->port_clks)
 		return -ENOMEM;
-#endif
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
@@ -4074,7 +4068,6 @@ static int mv_platform_probe(struct plat
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
@@ -4088,7 +4081,6 @@ static int mv_platform_probe(struct plat
 		if (!IS_ERR(hpriv->port_clks[port]))
 			clk_prepare_enable(hpriv->port_clks[port]);
 	}
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4115,7 +4107,6 @@ static int mv_platform_probe(struct plat
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4126,7 +4117,6 @@ err:
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 
 	return rc;
 }
@@ -4142,13 +4132,10 @@ err:
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
 	int port;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4159,7 +4146,6 @@ static int __devexit mv_platform_remove(
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 	return 0;
 }
 
_