* [GIT PULL 1/6] i.MX soc updates for 4.7
@ 2016-05-03 15:58 Shawn Guo
2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
` (5 more replies)
0 siblings, 6 replies; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.7
for you to fetch changes up to acc98009b87a811f9f815650274a1044474cd167:
ARM: imx: always use TWD on IMX6Q (2016-04-12 15:56:55 +0800)
----------------------------------------------------------------
The i.MX SoC updates for 4.7:
- Allow TWD to be used on UP kernel, as the PREEMPT-RT and cyclictest
shows that TWD has a slightly better performance than i.MX timer.
----------------------------------------------------------------
Sebastian Andrzej Siewior (1):
ARM: imx: always use TWD on IMX6Q
arch/arm/mach-imx/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
2016-05-10 14:16 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
` (4 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi arm-soc folks,
As per request from Arnd, I collected the device tree updates with new
clock ID dependency on a separate branch imx/dt-clkdep. The dependant
clock changes has been pulled by clk folks.
Please pull, thanks.
Shawn
The following changes since commit 7b5ca4533f1ac023a16e44a2a1680121272723f9:
Merge tag 'imx-clk-4.7' into imx/dt-clkdep (2016-04-13 17:36:03 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-clkdep-4.7
for you to fetch changes up to 77f0862d0d6874a73f83032b7ffd6d204fc8646c:
ARM: dts: vf610-colibri: enable display controller (2016-04-13 17:42:47 +0800)
----------------------------------------------------------------
The i.MX device tree updates with new clocks for 4.7:
- Add LCDIF and FlexCAN device support for i.MX7D
- New support i.MX7D based Nitrogen7 board from Boundary Devices
- Add display support for vf610-colibri board
----------------------------------------------------------------
Gary Bisson (3):
ARM: dts: imx7d: add lcdif support
ARM: dts: imx7d: add flexcan support
ARM: dts: imx: add Boundary Devices Nitrogen7 board
Stefan Agner (2):
ARM: dts: vf610: add display nodes
ARM: dts: vf610-colibri: enable display controller
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-nitrogen7.dts | 745 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 31 ++
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 16 +
arch/arm/boot/dts/vf-colibri.dtsi | 33 ++
arch/arm/boot/dts/vfxxx.dtsi | 19 +
6 files changed, 845 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
2016-05-10 13:46 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
` (3 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi arm-soc folks,
This is the second round of my imx/dt branch pull request. It's based
on the first take [1], which has been pulled some days ago.
Please pull, thanks.
Shawn
[1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/493365
The following changes since commit 880e1509db9732d5696d2a092e9bd61d80ad00be:
ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support (2016-04-18 12:54:21 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.7-2
for you to fetch changes up to 194521f72380d0e78caa71013e9e7de1703d8c85:
ARM: mx5: dts: Enable USB OTG on M53EVK (2016-05-03 21:10:11 +0800)
----------------------------------------------------------------
The i.MX device tree updates for 4.7, take 2:
- Update display clock configuration for imx6q-b850v3 board
- Use watchdog external reset for imx6q-ba16 board
- Update operating points settings for i.MX6UL/SX/DL
- New board support: imx6ul-pico-hobbit and imx6q-marsboard
- Add SAI audio support for imx6ul-14x14-evk board
- Enable USB OTG support for M53EVK board
- A couple of fixes on DTC warnings
----------------------------------------------------------------
Akshay Bhat (4):
ARM: dts: imx6q-b850v3: Remove ldb panel
ARM: dts: imx6q-b850v3: Update display clock source
ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
ARM: dts: imx6q-ba16: use wdog external reset
Fabio Estevam (9):
ARM: dts: imx6ul: Fix operating points
ARM: dts: imx6sx: Add 198MHz operating point
ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
ARM: dts: imx6: Do not hardcode the CLKO clock
ARM: dts: imx6ul-pico-hobbit: Add initial support
ARM: dts: imx28-m28: Remove unneeded partition nodes
ARM: dts: imx6sx-sdb: Add 198MHz operational point
ARM: dts: imx6qdl: Remove unneeded unit-addresses
ARM: dts: imx6ul-14x14-evk: Add audio support
Joshua Clayton (1):
ARM: dts: imx6: fix dtc warnings for ipu endpoints
Marcel Ziswiler (1):
ARM: dts: imx6: apalis: parallel lcd display support on ixora
Marek Vasut (1):
ARM: mx5: dts: Enable USB OTG on M53EVK
Sergio Prado (1):
ARM: dts: imx6: Add dts for Embest MarS Board
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx28-m28.dtsi | 26 --
arch/arm/boot/dts/imx53-m53evk.dts | 21 +-
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +-
arch/arm/boot/dts/imx6dl.dtsi | 2 +-
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 45 +++
arch/arm/boot/dts/imx6q-b450v3.dts | 5 +-
arch/arm/boot/dts/imx6q-b650v3.dts | 5 +-
arch/arm/boot/dts/imx6q-b850v3.dts | 33 +-
arch/arm/boot/dts/imx6q-ba16.dtsi | 1 +
arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +-
arch/arm/boot/dts/imx6q-marsboard.dts | 403 +++++++++++++++++++++
arch/arm/boot/dts/imx6q-tbs2910.dts | 2 +-
arch/arm/boot/dts/imx6q.dtsi | 18 +-
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-rex.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 32 +-
arch/arm/boot/dts/imx6sx-sdb.dts | 2 +
arch/arm/boot/dts/imx6sx.dtsi | 2 +
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 74 ++++
arch/arm/boot/dts/imx6ul-pico-hobbit.dts | 516 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6ul.dtsi | 12 +-
32 files changed, 1130 insertions(+), 99 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-marsboard.dts
create mode 100644 arch/arm/boot/dts/imx6ul-pico-hobbit.dts
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
2016-05-10 20:20 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
` (2 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.7
for you to fetch changes up to bb4b4e93febc139003e2af2f36e438df58b4803c:
arm64: dts: ls2080a: fsl-mc dt node updates (2016-04-26 11:25:44 +0800)
----------------------------------------------------------------
The Freescale/NXP arm64 device tree updates for 4.7:
- New board support of LS1043a-QDS from Freescale/NXP
- Add new compatible for LS1043A and LS2080A GPIO devices
- Update device tree bindings and sources for LS2080A fsl-mc device
- Update QSPI and DSPI support on LS1043A and LS2080A
----------------------------------------------------------------
Hou Zhiqiang (1):
Documentation: DT: Add entry for Freescale LS1043a-QDS board
Liu Gang (2):
arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes
Shaohui Xie (1):
arm64: dts: add LS1043a-QDS board support
Stuart Yoder (2):
Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
arm64: dts: ls2080a: fsl-mc dt node updates
Yuan Yao (4):
Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
arm64: dts: ls1043a: add the DTS node for QSPI support
Yunhui Cui (1):
arm64: dts: ls1043a-rdb: add the DTS for DSPI support
Documentation/devicetree/bindings/arm/fsl.txt | 4 +
.../devicetree/bindings/misc/fsl,qoriq-mc.txt | 81 ++++++++-
.../devicetree/bindings/mtd/fsl-quadspi.txt | 3 +-
.../devicetree/bindings/spi/spi-fsl-dspi.txt | 5 +-
arch/arm64/boot/dts/freescale/Makefile | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 181 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 13 ++
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 22 ++-
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 9 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 110 ++++++++++++-
10 files changed, 416 insertions(+), 15 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 5/6] i.MX defconfig updates for 4.7
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
` (2 preceding siblings ...)
2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
2016-05-10 12:09 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
2016-05-09 14:10 ` [GIT PULL 1/6] i.MX soc " Arnd Bergmann
5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.7
for you to fetch changes up to 2ead04d9d69ebded61da063cb5a8ade72da6c8f5:
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY (2016-05-03 20:58:07 +0800)
----------------------------------------------------------------
The i.MX defconfig updates for 4.7:
- Update multi_v5_defconfig for i.MX21/27 and systemd support
- Update imx_v6_v7_defconfig to support devices found on various i.MX6
board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC
----------------------------------------------------------------
Gary Bisson (3):
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
Jan Luebbe (2):
ARM: multi_v5_defconfig: Enable support for MX21/MX27
ARM: multi_v5_defconfig: Enable recommended options for systemd
Marcel Ziswiler (2):
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++
arch/arm/configs/multi_v5_defconfig | 21 ++++++++++++++++++---
2 files changed, 24 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 6/6] Freescale/NXP arm64 defconfig updates for 4.7
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
` (3 preceding siblings ...)
2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
@ 2016-05-03 15:58 ` Shawn Guo
2016-05-10 12:35 ` Arnd Bergmann
2016-05-09 14:10 ` [GIT PULL 1/6] i.MX soc " Arnd Bergmann
5 siblings, 1 reply; 12+ messages in thread
From: Shawn Guo @ 2016-05-03 15:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi arm-soc folks,
Different from above 5 pull requests that start off 4.6-rc1, this one
is based on 4.6-rc2, because commit 431597bb9556 ("arm64: defconfig:
updates for 4.6") changes arch/arm64/configs/defconfig dramatically
and went into 4.6-rc2. I have to base my branch onto 4.6-rc2 to avoid
manual merging.
Please pull, thanks.
Shawn
The following changes since commit 9735a22799b9214d17d3c231fe377fc852f042e9:
Linux 4.6-rc2 (2016-04-03 09:09:40 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig64-4.7
for you to fetch changes up to 3892132c2716e2747e562dd9a4c025387c19c329:
arm64: defconfig: enable freescale/nxp config options (2016-04-27 10:12:34 +0800)
----------------------------------------------------------------
The arm64 defconfig update for Freescale/NXP support:
- Clean up defconfig with savedefconfig
- Enable 48-bit virtual address support
- Enable driver support for various Freescale/NXP devices
----------------------------------------------------------------
Stuart Yoder (3):
arm64: defconfig: cleanup the defconfig
arm64: defconfig: enable 48-bit virtual addresses
arm64: defconfig: enable freescale/nxp config options
arch/arm64/configs/defconfig | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 1/6] i.MX soc updates for 4.7
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
` (4 preceding siblings ...)
2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
@ 2016-05-09 14:10 ` Arnd Bergmann
5 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-09 14:10 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 03 May 2016 23:58:01 Shawn Guo wrote:
> The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
>
> Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.7
>
> for you to fetch changes up to acc98009b87a811f9f815650274a1044474cd167:
>
> ARM: imx: always use TWD on IMX6Q (2016-04-12 15:56:55 +0800)
>
> ----------------------------------------------------------------
> The i.MX SoC updates for 4.7:
> - Allow TWD to be used on UP kernel, as the PREEMPT-RT and cyclictest
> shows that TWD has a slightly better performance than i.MX timer.
>
Pulled into next/soc, thanks!
Arnd
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 5/6] i.MX defconfig updates for 4.7
2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
@ 2016-05-10 12:09 ` Arnd Bergmann
0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 12:09 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 03 May 2016 23:58:05 Shawn Guo wrote:
> The i.MX defconfig updates for 4.7:
> - Update multi_v5_defconfig for i.MX21/27 and systemd support
> - Update imx_v6_v7_defconfig to support devices found on various i.MX6
> board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC
>
Merged into next/defconfig, thanks!
Arnd
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 6/6] Freescale/NXP arm64 defconfig updates for 4.7
2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
@ 2016-05-10 12:35 ` Arnd Bergmann
0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 12:35 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 03 May 2016 23:58:06 Shawn Guo wrote:
> Different from above 5 pull requests that start off 4.6-rc1, this one
> is based on 4.6-rc2, because commit 431597bb9556 ("arm64: defconfig:
> updates for 4.6") changes arch/arm64/configs/defconfig dramatically
> and went into 4.6-rc2. I have to base my branch onto 4.6-rc2 to avoid
> manual merging.
>
Sure, no problem. As you could tell from our git tree, we are already on
rc3 with the next/arm64 branch, so there is no backmerge.
Pulled into next/arm64 now, thanks!
Arnd
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2
2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
@ 2016-05-10 13:46 ` Arnd Bergmann
0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 13:46 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 03 May 2016 23:58:03 Shawn Guo wrote:
> The i.MX device tree updates for 4.7, take 2:
> - Update display clock configuration for imx6q-b850v3 board
> - Use watchdog external reset for imx6q-ba16 board
> - Update operating points settings for i.MX6UL/SX/DL
> - New board support: imx6ul-pico-hobbit and imx6q-marsboard
> - Add SAI audio support for imx6ul-14x14-evk board
> - Enable USB OTG support for M53EVK board
> - A couple of fixes on DTC warnings
>
Merged into next/dt, thanks!
Arnd
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks
2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
@ 2016-05-10 14:16 ` Arnd Bergmann
0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 14:16 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 03 May 2016 23:58:02 Shawn Guo wrote:
> The i.MX device tree updates with new clocks for 4.7:
> - Add LCDIF and FlexCAN device support for i.MX7D
> - New support i.MX7D based Nitrogen7 board from Boundary Devices
> - Add display support for vf610-colibri board
>
I've pulled it into the next/late branch, we'll send that on once the
drivers/clk changes are merged.
Thanks,
Arnd
^ permalink raw reply [flat|nested] 12+ messages in thread
* [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7
2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
@ 2016-05-10 20:20 ` Arnd Bergmann
0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2016-05-10 20:20 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 03 May 2016 23:58:04 Shawn Guo wrote:
> The Freescale/NXP arm64 device tree updates for 4.7:
> - New board support of LS1043a-QDS from Freescale/NXP
> - Add new compatible for LS1043A and LS2080A GPIO devices
> - Update device tree bindings and sources for LS2080A fsl-mc device
> - Update QSPI and DSPI support on LS1043A and LS2080A
>
>
Pulled into next/dt64, thanks!
Arnd
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2016-05-10 20:20 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-03 15:58 [GIT PULL 1/6] i.MX soc updates for 4.7 Shawn Guo
2016-05-03 15:58 ` [GIT PULL 2/6] i.MX device tree updates for 4.7, with new clocks Shawn Guo
2016-05-10 14:16 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 3/6] i.MX device tree updates for 4.7, take 2 Shawn Guo
2016-05-10 13:46 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 4/6] Freescale/NXP arm64 device tree updates for 4.7 Shawn Guo
2016-05-10 20:20 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 5/6] i.MX defconfig " Shawn Guo
2016-05-10 12:09 ` Arnd Bergmann
2016-05-03 15:58 ` [GIT PULL 6/6] Freescale/NXP arm64 " Shawn Guo
2016-05-10 12:35 ` Arnd Bergmann
2016-05-09 14:10 ` [GIT PULL 1/6] i.MX soc " Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.