* [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
@ 2014-09-10 15:43 Alban Bedel
2014-09-10 15:51 ` Arnd Bergmann
0 siblings, 1 reply; 7+ messages in thread
From: Alban Bedel @ 2014-09-10 15:43 UTC (permalink / raw)
To: Thierry Reding
Cc: linux-kernel, devicetree, linux-pwm, Grant Likely, Kumar Gala,
Ian Campbell, Mark Rutland, Pawel Moll, Rob Herring,
Roland Stigge, Alban Bedel
The LPC32xx motor PWMs have 3 channels that each drives a pair of
pins A and B, with B = !A. The polarity configuration is from the
point of view of pin A, so when using pin B the polarity is inverted.
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
---
V4: * Fixed the Kconfig dependencies
* Replaced __raw_writel() with writel()
* Implemented .set_polarity()
* Replaced the linux,polarity property with flags in the
pwm-cell using the common of_pwm_xlate_with_flags()
* Tried to clarify the device description in the DT binding
* Added optional clock properties to the binding definition
* Fixed the number of pwm cells in the LPC32xx DTSi
V3: * Updated to current mainline API
* Fixed LPC32xx vs. LPC32XX
* Various coding style fix
V2: * Splitted the DTS to its own patch
---
.../devicetree/bindings/pwm/lpc32xx-motor-pwm.txt | 30 +++
arch/arm/boot/dts/lpc32xx.dtsi | 2 +-
drivers/pwm/Kconfig | 11 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-lpc32xx-motor.c | 215 +++++++++++++++++++++
5 files changed, 258 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/pwm/lpc32xx-motor-pwm.txt
create mode 100644 drivers/pwm/pwm-lpc32xx-motor.c
diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-motor-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-motor-pwm.txt
new file mode 100644
index 0000000..76a086d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/lpc32xx-motor-pwm.txt
@@ -0,0 +1,30 @@
+LPC32xx Motor PWM controller
+
+The LPC32xx motor PWMs have 3 channels that each drives a pair of
+pins A and B, with B = !A. The polarity configuration is from the
+point of view of pin A, so when using pin B the polarity is inverted.
+
+Required properties:
+- compatible: should be "nxp,lpc3220-motor-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+ the cells format. The only third cell flag supported by this binding is
+ PWM_POLARITY_INVERTED.
+
+Optional properties:
+- clock-names: Set to "mpwm"
+- clocks: phandle of the clock used by the PWM module.
+ See ../clocks/clock-bindings.txt for details.
+
+Note: The clock properties are currently optional because the LPC32xx
+ architecture doesn't have a DT-aware clocksource driver yet.
+
+Examples:
+
+mpwm@400e8000 {
+ compatible = "nxp,lpc3220-motor-pwm";
+ reg = <0x400E8000 0x78>;
+ #pwm-cells = <3>;
+ clock-names = "mpwm";
+ clocks = <&clk_mpwm>;
+};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3abebb7..bde722e 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -190,7 +190,7 @@
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
- #pwm-cells = <2>;
+ #pwm-cells = <3>; /* pwm, period, flags */
};
i2cusb: i2c@31020300 {
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index b800783..a2f5f98 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -147,6 +147,17 @@ config PWM_LPC32XX
To compile this driver as a module, choose M here: the module
will be called pwm-lpc32xx.
+config PWM_LPC32XX_MOTOR
+ tristate "LPC32xx Motor PWM support"
+ depends on ARCH_LPC32XX || COMPILE_TEST
+ depends on CLKDEV_LOOKUP
+ help
+ Generic PWM framework driver for LPC32xx motor PWM. The LPC32xx SOC
+ has one motor PWM controllers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-lpc32xx-motor.
+
config PWM_LPSS
tristate "Intel LPSS PWM support"
depends on ACPI
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index f8c577d..3eb5dd9 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PWM_IMX) += pwm-imx.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
+obj-$(CONFIG_PWM_LPC32XX_MOTOR) += pwm-lpc32xx-motor.o
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
diff --git a/drivers/pwm/pwm-lpc32xx-motor.c b/drivers/pwm/pwm-lpc32xx-motor.c
new file mode 100644
index 0000000..866adb6
--- /dev/null
+++ b/drivers/pwm/pwm-lpc32xx-motor.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright 2012-2014 Alban Bedel <alban.bedel@avionic-design.de>
+ *
+ * Based on pwm-lpc32xx.c from Alexandre Pereira da Silva
+ * <aletes.xgr@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct lpc32xx_motor_pwm_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ unsigned int pins;
+ void __iomem *base;
+};
+
+#define to_motor_pwm_chip(_chip) \
+ container_of(_chip, struct lpc32xx_motor_pwm_chip, chip)
+
+/* Register mapping for MCPWM modules */
+#define LPC32XX_MCPWM_MCCON 0x00
+#define LPC32XX_MCPWM_MCCON_SET 0x04
+#define LPC32XX_MCPWM_MCCON_CLR 0x08
+#define LPC32XX_MCPWM_MCCAPCON 0x0C
+#define LPC32XX_MCPWM_MCCAPCON_SET 0x10
+#define LPC32XX_MCPWM_MCCAPCON_CLR 0x14
+#define LPC32XX_MCPWM_MCLIM0 0x24
+#define LPC32XX_MCPWM_MCLIM1 0x28
+#define LPC32XX_MCPWM_MCLIM2 0x2C
+#define LPC32XX_MCPWM_MCMAT0 0x30
+#define LPC32XX_MCPWM_MCMAT1 0x34
+#define LPC32XX_MCPWM_MCMAT2 0x38
+#define LPC32XX_MCPWM_MCINTEN_CLR 0x58
+
+#define LPC32XX_MCPWM_COUNT 3
+
+#define PWM_EN_MASK(pwm) BIT(0 + (pwm)->hwpwm * 8)
+#define PWM_POL_MASK(pwm) BIT(2 + (pwm)->hwpwm * 8)
+#define MCLIM_REG_OFFSET(pwm) (LPC32XX_MCPWM_MCLIM0 + (pwm)->hwpwm * 4)
+#define MCMAT_REG_OFFSET(pwm) (LPC32XX_MCPWM_MCMAT0 + (pwm)->hwpwm * 4)
+
+static int lpc32xx_motor_pwm_config(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct lpc32xx_motor_pwm_chip *lpc32xx = to_motor_pwm_chip(chip);
+ u64 rate, period, duty;
+ int err;
+
+ /* The clock is needed to access the registers */
+ err = clk_enable(lpc32xx->clk);
+ if (err)
+ return err;
+
+ /* Calculate period */
+ rate = clk_get_rate(lpc32xx->clk);
+ period = (u64)period_ns * rate;
+ duty = (u64)duty_ns * rate;
+ do_div(period, 1000000000);
+ do_div(duty, 1000000000);
+
+ /* Write to limit register -> period */
+ writel(period, lpc32xx->base + MCLIM_REG_OFFSET(pwm));
+
+ /* Write to match register -> duty */
+ writel(period - duty, lpc32xx->base + MCMAT_REG_OFFSET(pwm));
+
+ /* Disable the clock now that we are done */
+ clk_disable(lpc32xx->clk);
+ return 0;
+}
+
+static int lpc32xx_motor_pwm_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ enum pwm_polarity polarity)
+{
+ struct lpc32xx_motor_pwm_chip *lpc32xx = to_motor_pwm_chip(chip);
+ int err = 0;
+
+ /* The clock is needed to access the registers */
+ err = clk_enable(lpc32xx->clk);
+ if (err)
+ return err;
+
+ if (polarity == PWM_POLARITY_NORMAL)
+ writel(PWM_POL_MASK(pwm),
+ lpc32xx->base + LPC32XX_MCPWM_MCCON_CLR);
+ else
+ writel(PWM_POL_MASK(pwm),
+ lpc32xx->base + LPC32XX_MCPWM_MCCON_SET);
+
+ /* Disable the clock now that we are done */
+ clk_disable(lpc32xx->clk);
+ return 0;
+}
+
+static int lpc32xx_motor_pwm_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct lpc32xx_motor_pwm_chip *lpc32xx = to_motor_pwm_chip(chip);
+ int err;
+
+ err = clk_enable(lpc32xx->clk);
+ if (err)
+ return err;
+
+ writel(PWM_EN_MASK(pwm), lpc32xx->base + LPC32XX_MCPWM_MCCON_SET);
+
+ return 0;
+}
+
+static void lpc32xx_motor_pwm_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct lpc32xx_motor_pwm_chip *lpc32xx = to_motor_pwm_chip(chip);
+
+ writel(PWM_EN_MASK(pwm), lpc32xx->base + LPC32XX_MCPWM_MCCON_CLR);
+
+ clk_disable(lpc32xx->clk);
+}
+
+static const struct pwm_ops lpc32xx_motor_pwm_ops = {
+ .config = lpc32xx_motor_pwm_config,
+ .set_polarity = lpc32xx_motor_pwm_set_polarity,
+ .enable = lpc32xx_motor_pwm_enable,
+ .disable = lpc32xx_motor_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int lpc32xx_motor_pwm_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_motor_pwm_chip *lpc32xx;
+ struct resource *res;
+ int ret;
+
+ lpc32xx = devm_kzalloc(&pdev->dev, sizeof(*lpc32xx), GFP_KERNEL);
+ if (!lpc32xx)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ lpc32xx->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!lpc32xx->base)
+ return -EADDRNOTAVAIL;
+
+ lpc32xx->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(lpc32xx->clk))
+ return PTR_ERR(lpc32xx->clk);
+
+ lpc32xx->chip.dev = &pdev->dev;
+ lpc32xx->chip.ops = &lpc32xx_motor_pwm_ops;
+ lpc32xx->chip.of_xlate = of_pwm_xlate_with_flags;
+ lpc32xx->chip.of_pwm_n_cells = 3;
+ lpc32xx->chip.npwm = LPC32XX_MCPWM_COUNT;
+ lpc32xx->chip.base = -1;
+
+ ret = pwmchip_add(&lpc32xx->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, lpc32xx);
+
+ return 0;
+}
+
+static int lpc32xx_motor_pwm_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_motor_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < lpc32xx->chip.npwm; i++)
+ pwm_disable(&lpc32xx->chip.pwms[i]);
+
+ return pwmchip_remove(&lpc32xx->chip);
+}
+
+static const struct of_device_id lpc32xx_motor_pwm_dt_ids[] = {
+ { .compatible = "nxp,lpc3220-motor-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_motor_pwm_dt_ids);
+
+static struct platform_driver lpc32xx_motor_pwm_driver = {
+ .driver = {
+ .name = "lpc32xx-motor-pwm",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lpc32xx_motor_pwm_dt_ids),
+ },
+ .probe = lpc32xx_motor_pwm_probe,
+ .remove = lpc32xx_motor_pwm_remove,
+};
+module_platform_driver(lpc32xx_motor_pwm_driver);
+
+MODULE_ALIAS("platform:lpc32xx-motor-pwm");
+MODULE_AUTHOR("Alban Bedel <alban.bedel@avionic-design.de>");
+MODULE_DESCRIPTION("LPC32xx Motor PWM Driver");
+MODULE_LICENSE("GPL v2");
--
2.1.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
2014-09-10 15:43 [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM Alban Bedel
@ 2014-09-10 15:51 ` Arnd Bergmann
2014-09-10 15:59 ` Alban Bedel
0 siblings, 1 reply; 7+ messages in thread
From: Arnd Bergmann @ 2014-09-10 15:51 UTC (permalink / raw)
To: Alban Bedel
Cc: Thierry Reding, linux-kernel, devicetree, linux-pwm,
Grant Likely, Kumar Gala, Ian Campbell, Mark Rutland, Pawel Moll,
Rob Herring, Roland Stigge
On Wednesday 10 September 2014 17:43:42 Alban Bedel wrote:
> +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> + the cells format. The only third cell flag supported by this binding is
> + PWM_POLARITY_INVERTED.
If you don't have multiple pwm outputs or programmable period, I would say it
should use #pwm-cells=<1> and only pass the polarity.
Arnd
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
2014-09-10 15:51 ` Arnd Bergmann
@ 2014-09-10 15:59 ` Alban Bedel
0 siblings, 0 replies; 7+ messages in thread
From: Alban Bedel @ 2014-09-10 15:59 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Thierry Reding, linux-kernel, devicetree, linux-pwm,
Grant Likely, Kumar Gala, Ian Campbell, Mark Rutland, Pawel Moll,
Rob Herring, Roland Stigge
[-- Attachment #1: Type: text/plain, Size: 594 bytes --]
On Wed, 10 Sep 2014 17:51:36 +0200
Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday 10 September 2014 17:43:42 Alban Bedel wrote:
> > +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> > + the cells format. The only third cell flag supported by this binding is
> > + PWM_POLARITY_INVERTED.
>
> If you don't have multiple pwm outputs or programmable period, I would say it
> should use #pwm-cells=<1> and only pass the polarity.
There is 3 channel, so 3 PWM from the API POV, and the period is
independently programmable for each one.
Alban
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
@ 2014-09-10 15:59 ` Alban Bedel
0 siblings, 0 replies; 7+ messages in thread
From: Alban Bedel @ 2014-09-10 15:59 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Thierry Reding, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pwm-u79uwXL29TY76Z2rM5mHXA, Grant Likely, Kumar Gala,
Ian Campbell, Mark Rutland, Pawel Moll, Rob Herring,
Roland Stigge
[-- Attachment #1: Type: text/plain, Size: 614 bytes --]
On Wed, 10 Sep 2014 17:51:36 +0200
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> wrote:
> On Wednesday 10 September 2014 17:43:42 Alban Bedel wrote:
> > +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> > + the cells format. The only third cell flag supported by this binding is
> > + PWM_POLARITY_INVERTED.
>
> If you don't have multiple pwm outputs or programmable period, I would say it
> should use #pwm-cells=<1> and only pass the polarity.
There is 3 channel, so 3 PWM from the API POV, and the period is
independently programmable for each one.
Alban
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
2014-09-10 15:59 ` Alban Bedel
(?)
@ 2014-09-10 16:28 ` Arnd Bergmann
2014-09-11 8:36 ` Alban Bedel
-1 siblings, 1 reply; 7+ messages in thread
From: Arnd Bergmann @ 2014-09-10 16:28 UTC (permalink / raw)
To: Alban Bedel
Cc: Thierry Reding, linux-kernel, devicetree, linux-pwm,
Grant Likely, Kumar Gala, Ian Campbell, Mark Rutland, Pawel Moll,
Rob Herring, Roland Stigge
On Wednesday 10 September 2014 17:59:41 Alban Bedel wrote:
> On Wed, 10 Sep 2014 17:51:36 +0200
> Arnd Bergmann <arnd@arndb.de> wrote:
>
> > On Wednesday 10 September 2014 17:43:42 Alban Bedel wrote:
> > > +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> > > + the cells format. The only third cell flag supported by this binding is
> > > + PWM_POLARITY_INVERTED.
> >
> > If you don't have multiple pwm outputs or programmable period, I would say it
> > should use #pwm-cells=<1> and only pass the polarity.
>
> There is 3 channel, so 3 PWM from the API POV, and the period is
> independently programmable for each one.
Then you should put the channel number into the first cell and the period
length into the second cell, as the pwm.txt document says.
Arnd
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
2014-09-10 16:28 ` Arnd Bergmann
@ 2014-09-11 8:36 ` Alban Bedel
2014-09-11 9:39 ` Arnd Bergmann
0 siblings, 1 reply; 7+ messages in thread
From: Alban Bedel @ 2014-09-11 8:36 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Alban Bedel, Thierry Reding, linux-kernel, devicetree, linux-pwm,
Grant Likely, Kumar Gala, Ian Campbell, Mark Rutland, Pawel Moll,
Rob Herring, Roland Stigge
[-- Attachment #1: Type: text/plain, Size: 1036 bytes --]
On Wed, 10 Sep 2014 18:28:39 +0200
Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday 10 September 2014 17:59:41 Alban Bedel wrote:
> > On Wed, 10 Sep 2014 17:51:36 +0200
> > Arnd Bergmann <arnd@arndb.de> wrote:
> >
> > > On Wednesday 10 September 2014 17:43:42 Alban Bedel wrote:
> > > > +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> > > > + the cells format. The only third cell flag supported by this binding is
> > > > + PWM_POLARITY_INVERTED.
> > >
> > > If you don't have multiple pwm outputs or programmable period, I would say it
> > > should use #pwm-cells=<1> and only pass the polarity.
> >
> > There is 3 channel, so 3 PWM from the API POV, and the period is
> > independently programmable for each one.
>
> Then you should put the channel number into the first cell and the period
> length into the second cell, as the pwm.txt document says.
That's what is implemented in this patch, by using
of_pwm_xlate_with_flags() for the .of_xlate callback.
Alban
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM
2014-09-11 8:36 ` Alban Bedel
@ 2014-09-11 9:39 ` Arnd Bergmann
0 siblings, 0 replies; 7+ messages in thread
From: Arnd Bergmann @ 2014-09-11 9:39 UTC (permalink / raw)
To: Alban Bedel
Cc: Thierry Reding, linux-kernel, devicetree, linux-pwm,
Grant Likely, Kumar Gala, Ian Campbell, Mark Rutland, Pawel Moll,
Rob Herring, Roland Stigge
On Thursday 11 September 2014 10:36:21 Alban Bedel wrote:
> On Wed, 10 Sep 2014 18:28:39 +0200
> Arnd Bergmann <arnd@arndb.de> wrote:
>
> > On Wednesday 10 September 2014 17:59:41 Alban Bedel wrote:
> > > On Wed, 10 Sep 2014 17:51:36 +0200
> > > Arnd Bergmann <arnd@arndb.de> wrote:
> > >
> > > > On Wednesday 10 September 2014 17:43:42 Alban Bedel wrote:
> > > > > +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> > > > > + the cells format. The only third cell flag supported by this binding is
> > > > > + PWM_POLARITY_INVERTED.
> > > >
> > > > If you don't have multiple pwm outputs or programmable period, I would say it
> > > > should use #pwm-cells=<1> and only pass the polarity.
> > >
> > > There is 3 channel, so 3 PWM from the API POV, and the period is
> > > independently programmable for each one.
> >
> > Then you should put the channel number into the first cell and the period
> > length into the second cell, as the pwm.txt document says.
>
> That's what is implemented in this patch, by using
> of_pwm_xlate_with_flags() for the .of_xlate callback.
>
Ah, my mistake. I misread the sentence in the binding for meaning that
you only support the third cell. It's all good then.
Arnd
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-09-11 9:39 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-10 15:43 [PATCH V4] pwm: lpc32xx - Add a driver for the motor PWM Alban Bedel
2014-09-10 15:51 ` Arnd Bergmann
2014-09-10 15:59 ` Alban Bedel
2014-09-10 15:59 ` Alban Bedel
2014-09-10 16:28 ` Arnd Bergmann
2014-09-11 8:36 ` Alban Bedel
2014-09-11 9:39 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.