All of lore.kernel.org
 help / color / mirror / Atom feed
From: Can Guo <cang@codeaurora.org>
To: Ziqi Chen <ziqichen@codeaurora.org>
Cc: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
	hongwus@codeaurora.org, rnayak@codeaurora.org,
	vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
	martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
	kernel-team@android.com, saravanak@google.com,
	salyzyn@google.com, kwmad.kim@samsung.com,
	stanley.chu@mediatek.com, Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Bean Huo <beanhuo@micron.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Satya Tangirala <satyat@google.com>,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH RFC v4 1/1] scsi: ufs: Fix ufs power down/on specs violation
Date: Wed, 23 Dec 2020 20:17:26 +0800	[thread overview]
Message-ID: <2c355b51a35c7d7da6dd1ce995a4615a@codeaurora.org> (raw)
In-Reply-To: <1608644981-46267-1-git-send-email-ziqichen@codeaurora.org>

On 2020-12-22 21:49, Ziqi Chen wrote:
> As per specs, e.g, JESD220E chapter 7.2, while powering
> off/on the ufs device, RST_N signal and REF_CLK signal
> should be between VSS(Ground) and VCCQ/VCCQ2.
> 
> To flexibly control device reset line, refactor the function
> ufschd_vops_device_reset(sturct ufs_hba *hba) to ufshcd_
> vops_device_reset(sturct ufs_hba *hba, bool asserted). The
> new parameter "bool asserted" is used to separate device reset
> line pulling down from pulling up.
> 
> Cc: Kiwoong Kim <kwmad.kim@samsung.com>
> Cc: Stanley Chu <stanley.chu@mediatek.com>
> Signed-off-by: Ziqi Chen <ziqichen@codeaurora.org>
> ---
>  drivers/scsi/ufs/ufs-mediatek.c | 32 ++++++++++++++++----------------
>  drivers/scsi/ufs/ufs-qcom.c     | 24 +++++++++++++++---------
>  drivers/scsi/ufs/ufshcd.c       | 36 
> +++++++++++++++++++++++++-----------
>  drivers/scsi/ufs/ufshcd.h       |  8 ++++----
>  4 files changed, 60 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-mediatek.c 
> b/drivers/scsi/ufs/ufs-mediatek.c
> index 80618af..072f4db 100644
> --- a/drivers/scsi/ufs/ufs-mediatek.c
> +++ b/drivers/scsi/ufs/ufs-mediatek.c
> @@ -841,27 +841,27 @@ static int ufs_mtk_link_startup_notify(struct
> ufs_hba *hba,
>  	return ret;
>  }
> 
> -static int ufs_mtk_device_reset(struct ufs_hba *hba)
> +static int ufs_mtk_device_reset(struct ufs_hba *hba, bool asserted)
>  {
>  	struct arm_smccc_res res;
> 
> -	ufs_mtk_device_reset_ctrl(0, res);
> +	if (asserted) {
> +		ufs_mtk_device_reset_ctrl(0, res);
> 
> -	/*
> -	 * The reset signal is active low. UFS devices shall detect
> -	 * more than or equal to 1us of positive or negative RST_n
> -	 * pulse width.
> -	 *
> -	 * To be on safe side, keep the reset low for at least 10us.
> -	 */
> -	usleep_range(10, 15);
> -
> -	ufs_mtk_device_reset_ctrl(1, res);
> -
> -	/* Some devices may need time to respond to rst_n */
> -	usleep_range(10000, 15000);
> +		/*
> +		 * The reset signal is active low. UFS devices shall detect
> +		 * more than or equal to 1us of positive or negative RST_n
> +		 * pulse width.
> +		 *
> +		 * To be on safe side, keep the reset low for at least 10us.
> +		 */
> +		usleep_range(10, 15);
> +	} else {
> +		ufs_mtk_device_reset_ctrl(1, res);
> 
> -	dev_info(hba->dev, "device reset done\n");
> +		/* Some devices may need time to respond to rst_n */
> +		usleep_range(10000, 15000);
> +	}
> 
>  	return 0;
>  }
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 2206b1e..fed10e5 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -1406,10 +1406,11 @@ static void ufs_qcom_dump_dbg_regs(struct 
> ufs_hba *hba)
>  /**
>   * ufs_qcom_device_reset() - toggle the (optional) device reset line
>   * @hba: per-adapter instance
> + * @asserted: assert or deassert device reset line
>   *
>   * Toggles the (optional) reset line to reset the attached device.
>   */
> -static int ufs_qcom_device_reset(struct ufs_hba *hba)
> +static int ufs_qcom_device_reset(struct ufs_hba *hba, bool asserted)
>  {
>  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> 
> @@ -1417,15 +1418,20 @@ static int ufs_qcom_device_reset(struct ufs_hba 
> *hba)
>  	if (!host->device_reset)
>  		return -EOPNOTSUPP;
> 
> -	/*
> -	 * The UFS device shall detect reset pulses of 1us, sleep for 10us to
> -	 * be on the safe side.
> -	 */
> -	gpiod_set_value_cansleep(host->device_reset, 1);
> -	usleep_range(10, 15);
> +	if (asserted) {
> +		gpiod_set_value_cansleep(host->device_reset, 1);
> 
> -	gpiod_set_value_cansleep(host->device_reset, 0);
> -	usleep_range(10, 15);
> +		/*
> +		 * The UFS device shall detect reset pulses of 1us, sleep for 10us 
> to
> +		 * be on the safe side.
> +		 */
> +		usleep_range(10, 15);
> +	} else {
> +		gpiod_set_value_cansleep(host->device_reset, 0);
> +
> +		 /* Some devices may need time to respond to rst_n */
> +		usleep_range(10, 15);
> +	}
> 
>  	return 0;
>  }
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index e221add..f2daac2 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -585,7 +585,13 @@ static void ufshcd_device_reset(struct ufs_hba 
> *hba)
>  {
>  	int err;
> 
> -	err = ufshcd_vops_device_reset(hba);
> +	err = ufshcd_vops_device_reset(hba, true);
> +	if (err) {
> +		dev_err(hba->dev, "asserting device reset failed: %d\n", err);
> +		return;
> +	}
> +
> +	err = ufshcd_vops_device_reset(hba, false);
> 
>  	if (!err) {
>  		ufshcd_set_ufs_dev_active(hba);
> @@ -593,7 +599,11 @@ static void ufshcd_device_reset(struct ufs_hba 
> *hba)
>  			hba->wb_enabled = false;
>  			hba->wb_buf_flush_enabled = false;
>  		}
> +		dev_dbg(hba->dev, "device reset done\n");
> +	} else {
> +		dev_err(hba->dev, "deasserting device reset failed: %d\n", err);
>  	}
> +
>  	if (err != -EOPNOTSUPP)
>  		ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err);
>  }
> @@ -8686,8 +8696,6 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	if (ret)
>  		goto set_dev_active;
> 
> -	ufshcd_vreg_set_lpm(hba);
> -
>  disable_clks:
>  	/*
>  	 * Call vendor specific suspend callback. As these callbacks may 
> access
> @@ -8703,6 +8711,9 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	 */
>  	ufshcd_disable_irq(hba);
> 
> +	if (ufshcd_is_link_off(hba))
> +		ufshcd_vops_device_reset(hba, true);
> +
>  	ufshcd_setup_clocks(hba, false);
> 
>  	if (ufshcd_is_clkgating_allowed(hba)) {
> @@ -8711,6 +8722,8 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  					hba->clk_gating.state);
>  	}
> 
> +	ufshcd_vreg_set_lpm(hba);
> +
>  	/* Put the host controller in low power mode if possible */
>  	ufshcd_hba_vreg_set_lpm(hba);
>  	goto out;
> @@ -8778,18 +8791,19 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	old_link_state = hba->uic_link_state;
> 
>  	ufshcd_hba_vreg_set_hpm(hba);
> +
> +	ret = ufshcd_vreg_set_hpm(hba);
> +	if (ret)
> +		goto out;
> +
>  	/* Make sure clocks are enabled before accessing controller */
>  	ret = ufshcd_setup_clocks(hba, true);
>  	if (ret)
> -		goto out;
> +		goto disable_vreg;
> 
>  	/* enable the host irq as host controller would be active soon */
>  	ufshcd_enable_irq(hba);
> 
> -	ret = ufshcd_vreg_set_hpm(hba);
> -	if (ret)
> -		goto disable_irq_and_vops_clks;
> -
>  	/*
>  	 * Call vendor specific resume callback. As these callbacks may 
> access
>  	 * vendor specific host controller register space call them when the
> @@ -8797,7 +8811,7 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	 */
>  	ret = ufshcd_vops_resume(hba, pm_op);
>  	if (ret)
> -		goto disable_vreg;
> +		goto disable_irq_and_vops_clks;
> 
>  	/* For DeepSleep, the only supported option is to have the link off 
> */
>  	WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && 
> !ufshcd_is_link_off(hba));
> @@ -8864,8 +8878,6 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	ufshcd_link_state_transition(hba, old_link_state, 0);
>  vendor_suspend:
>  	ufshcd_vops_suspend(hba, pm_op);
> -disable_vreg:
> -	ufshcd_vreg_set_lpm(hba);
>  disable_irq_and_vops_clks:
>  	ufshcd_disable_irq(hba);
>  	if (hba->clk_scaling.is_allowed)
> @@ -8876,6 +8888,8 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  		trace_ufshcd_clk_gating(dev_name(hba->dev),
>  					hba->clk_gating.state);
>  	}
> +disable_vreg:
> +	ufshcd_vreg_set_lpm(hba);
>  out:
>  	hba->pm_op_in_progress = 0;
>  	if (ret)
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 9bb5f0e..d5fbaba 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -319,7 +319,7 @@ struct ufs_pwr_mode_info {
>   * @resume: called during host controller PM callback
>   * @dbg_register_dump: used to dump controller debug information
>   * @phy_initialization: used to initialize phys
> - * @device_reset: called to issue a reset pulse on the UFS device
> + * @device_reset: called to assert or deassert device reset line
>   * @program_key: program or evict an inline encryption key
>   * @event_notify: called to notify important events
>   */
> @@ -350,7 +350,7 @@ struct ufs_hba_variant_ops {
>  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
>  	void	(*dbg_register_dump)(struct ufs_hba *hba);
>  	int	(*phy_initialization)(struct ufs_hba *);
> -	int	(*device_reset)(struct ufs_hba *hba);
> +	int	(*device_reset)(struct ufs_hba *hba, bool asserted);
>  	void	(*config_scaling_param)(struct ufs_hba *hba,
>  					struct devfreq_dev_profile *profile,
>  					void *data);
> @@ -1216,10 +1216,10 @@ static inline void
> ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
>  		hba->vops->dbg_register_dump(hba);
>  }
> 
> -static inline int ufshcd_vops_device_reset(struct ufs_hba *hba)
> +static inline int ufshcd_vops_device_reset(struct ufs_hba *hba, bool 
> asserted)
>  {
>  	if (hba->vops && hba->vops->device_reset)
> -		return hba->vops->device_reset(hba);
> +		return hba->vops->device_reset(hba, asserted);
> 
>  	return -EOPNOTSUPP;
>  }

Reviewed-by: Can Guo <cang@codeaurora.org>

WARNING: multiple messages have this Message-ID (diff)
From: Can Guo <cang@codeaurora.org>
To: Ziqi Chen <ziqichen@codeaurora.org>
Cc: nguyenb@codeaurora.org, Alim Akhtar <alim.akhtar@samsung.com>,
	vinholikatti@gmail.com, Bean Huo <beanhuo@micron.com>,
	Satya Tangirala <satyat@google.com>,
	jejb@linux.vnet.ibm.com, Bart Van Assche <bvanassche@acm.org>,
	linux-scsi@vger.kernel.org, kwmad.kim@samsung.com,
	Andy Gross <agross@kernel.org>,
	kernel-team@android.com, salyzyn@google.com,
	linux-arm-msm@vger.kernel.org,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Avri Altman <avri.altman@wdc.com>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	stanley.chu@mediatek.com, linux-arm-kernel@lists.infradead.org,
	rnayak@codeaurora.org, saravanak@google.com,
	martin.petersen@oracle.com,
	Adrian Hunter <adrian.hunter@intel.com>,
	linux-kernel@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	hongwus@codeaurora.org, asutoshd@codeaurora.org
Subject: Re: [PATCH RFC v4 1/1] scsi: ufs: Fix ufs power down/on specs violation
Date: Wed, 23 Dec 2020 20:17:26 +0800	[thread overview]
Message-ID: <2c355b51a35c7d7da6dd1ce995a4615a@codeaurora.org> (raw)
In-Reply-To: <1608644981-46267-1-git-send-email-ziqichen@codeaurora.org>

On 2020-12-22 21:49, Ziqi Chen wrote:
> As per specs, e.g, JESD220E chapter 7.2, while powering
> off/on the ufs device, RST_N signal and REF_CLK signal
> should be between VSS(Ground) and VCCQ/VCCQ2.
> 
> To flexibly control device reset line, refactor the function
> ufschd_vops_device_reset(sturct ufs_hba *hba) to ufshcd_
> vops_device_reset(sturct ufs_hba *hba, bool asserted). The
> new parameter "bool asserted" is used to separate device reset
> line pulling down from pulling up.
> 
> Cc: Kiwoong Kim <kwmad.kim@samsung.com>
> Cc: Stanley Chu <stanley.chu@mediatek.com>
> Signed-off-by: Ziqi Chen <ziqichen@codeaurora.org>
> ---
>  drivers/scsi/ufs/ufs-mediatek.c | 32 ++++++++++++++++----------------
>  drivers/scsi/ufs/ufs-qcom.c     | 24 +++++++++++++++---------
>  drivers/scsi/ufs/ufshcd.c       | 36 
> +++++++++++++++++++++++++-----------
>  drivers/scsi/ufs/ufshcd.h       |  8 ++++----
>  4 files changed, 60 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-mediatek.c 
> b/drivers/scsi/ufs/ufs-mediatek.c
> index 80618af..072f4db 100644
> --- a/drivers/scsi/ufs/ufs-mediatek.c
> +++ b/drivers/scsi/ufs/ufs-mediatek.c
> @@ -841,27 +841,27 @@ static int ufs_mtk_link_startup_notify(struct
> ufs_hba *hba,
>  	return ret;
>  }
> 
> -static int ufs_mtk_device_reset(struct ufs_hba *hba)
> +static int ufs_mtk_device_reset(struct ufs_hba *hba, bool asserted)
>  {
>  	struct arm_smccc_res res;
> 
> -	ufs_mtk_device_reset_ctrl(0, res);
> +	if (asserted) {
> +		ufs_mtk_device_reset_ctrl(0, res);
> 
> -	/*
> -	 * The reset signal is active low. UFS devices shall detect
> -	 * more than or equal to 1us of positive or negative RST_n
> -	 * pulse width.
> -	 *
> -	 * To be on safe side, keep the reset low for at least 10us.
> -	 */
> -	usleep_range(10, 15);
> -
> -	ufs_mtk_device_reset_ctrl(1, res);
> -
> -	/* Some devices may need time to respond to rst_n */
> -	usleep_range(10000, 15000);
> +		/*
> +		 * The reset signal is active low. UFS devices shall detect
> +		 * more than or equal to 1us of positive or negative RST_n
> +		 * pulse width.
> +		 *
> +		 * To be on safe side, keep the reset low for at least 10us.
> +		 */
> +		usleep_range(10, 15);
> +	} else {
> +		ufs_mtk_device_reset_ctrl(1, res);
> 
> -	dev_info(hba->dev, "device reset done\n");
> +		/* Some devices may need time to respond to rst_n */
> +		usleep_range(10000, 15000);
> +	}
> 
>  	return 0;
>  }
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 2206b1e..fed10e5 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -1406,10 +1406,11 @@ static void ufs_qcom_dump_dbg_regs(struct 
> ufs_hba *hba)
>  /**
>   * ufs_qcom_device_reset() - toggle the (optional) device reset line
>   * @hba: per-adapter instance
> + * @asserted: assert or deassert device reset line
>   *
>   * Toggles the (optional) reset line to reset the attached device.
>   */
> -static int ufs_qcom_device_reset(struct ufs_hba *hba)
> +static int ufs_qcom_device_reset(struct ufs_hba *hba, bool asserted)
>  {
>  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> 
> @@ -1417,15 +1418,20 @@ static int ufs_qcom_device_reset(struct ufs_hba 
> *hba)
>  	if (!host->device_reset)
>  		return -EOPNOTSUPP;
> 
> -	/*
> -	 * The UFS device shall detect reset pulses of 1us, sleep for 10us to
> -	 * be on the safe side.
> -	 */
> -	gpiod_set_value_cansleep(host->device_reset, 1);
> -	usleep_range(10, 15);
> +	if (asserted) {
> +		gpiod_set_value_cansleep(host->device_reset, 1);
> 
> -	gpiod_set_value_cansleep(host->device_reset, 0);
> -	usleep_range(10, 15);
> +		/*
> +		 * The UFS device shall detect reset pulses of 1us, sleep for 10us 
> to
> +		 * be on the safe side.
> +		 */
> +		usleep_range(10, 15);
> +	} else {
> +		gpiod_set_value_cansleep(host->device_reset, 0);
> +
> +		 /* Some devices may need time to respond to rst_n */
> +		usleep_range(10, 15);
> +	}
> 
>  	return 0;
>  }
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index e221add..f2daac2 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -585,7 +585,13 @@ static void ufshcd_device_reset(struct ufs_hba 
> *hba)
>  {
>  	int err;
> 
> -	err = ufshcd_vops_device_reset(hba);
> +	err = ufshcd_vops_device_reset(hba, true);
> +	if (err) {
> +		dev_err(hba->dev, "asserting device reset failed: %d\n", err);
> +		return;
> +	}
> +
> +	err = ufshcd_vops_device_reset(hba, false);
> 
>  	if (!err) {
>  		ufshcd_set_ufs_dev_active(hba);
> @@ -593,7 +599,11 @@ static void ufshcd_device_reset(struct ufs_hba 
> *hba)
>  			hba->wb_enabled = false;
>  			hba->wb_buf_flush_enabled = false;
>  		}
> +		dev_dbg(hba->dev, "device reset done\n");
> +	} else {
> +		dev_err(hba->dev, "deasserting device reset failed: %d\n", err);
>  	}
> +
>  	if (err != -EOPNOTSUPP)
>  		ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err);
>  }
> @@ -8686,8 +8696,6 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	if (ret)
>  		goto set_dev_active;
> 
> -	ufshcd_vreg_set_lpm(hba);
> -
>  disable_clks:
>  	/*
>  	 * Call vendor specific suspend callback. As these callbacks may 
> access
> @@ -8703,6 +8711,9 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	 */
>  	ufshcd_disable_irq(hba);
> 
> +	if (ufshcd_is_link_off(hba))
> +		ufshcd_vops_device_reset(hba, true);
> +
>  	ufshcd_setup_clocks(hba, false);
> 
>  	if (ufshcd_is_clkgating_allowed(hba)) {
> @@ -8711,6 +8722,8 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  					hba->clk_gating.state);
>  	}
> 
> +	ufshcd_vreg_set_lpm(hba);
> +
>  	/* Put the host controller in low power mode if possible */
>  	ufshcd_hba_vreg_set_lpm(hba);
>  	goto out;
> @@ -8778,18 +8791,19 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	old_link_state = hba->uic_link_state;
> 
>  	ufshcd_hba_vreg_set_hpm(hba);
> +
> +	ret = ufshcd_vreg_set_hpm(hba);
> +	if (ret)
> +		goto out;
> +
>  	/* Make sure clocks are enabled before accessing controller */
>  	ret = ufshcd_setup_clocks(hba, true);
>  	if (ret)
> -		goto out;
> +		goto disable_vreg;
> 
>  	/* enable the host irq as host controller would be active soon */
>  	ufshcd_enable_irq(hba);
> 
> -	ret = ufshcd_vreg_set_hpm(hba);
> -	if (ret)
> -		goto disable_irq_and_vops_clks;
> -
>  	/*
>  	 * Call vendor specific resume callback. As these callbacks may 
> access
>  	 * vendor specific host controller register space call them when the
> @@ -8797,7 +8811,7 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	 */
>  	ret = ufshcd_vops_resume(hba, pm_op);
>  	if (ret)
> -		goto disable_vreg;
> +		goto disable_irq_and_vops_clks;
> 
>  	/* For DeepSleep, the only supported option is to have the link off 
> */
>  	WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && 
> !ufshcd_is_link_off(hba));
> @@ -8864,8 +8878,6 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  	ufshcd_link_state_transition(hba, old_link_state, 0);
>  vendor_suspend:
>  	ufshcd_vops_suspend(hba, pm_op);
> -disable_vreg:
> -	ufshcd_vreg_set_lpm(hba);
>  disable_irq_and_vops_clks:
>  	ufshcd_disable_irq(hba);
>  	if (hba->clk_scaling.is_allowed)
> @@ -8876,6 +8888,8 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
>  		trace_ufshcd_clk_gating(dev_name(hba->dev),
>  					hba->clk_gating.state);
>  	}
> +disable_vreg:
> +	ufshcd_vreg_set_lpm(hba);
>  out:
>  	hba->pm_op_in_progress = 0;
>  	if (ret)
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 9bb5f0e..d5fbaba 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -319,7 +319,7 @@ struct ufs_pwr_mode_info {
>   * @resume: called during host controller PM callback
>   * @dbg_register_dump: used to dump controller debug information
>   * @phy_initialization: used to initialize phys
> - * @device_reset: called to issue a reset pulse on the UFS device
> + * @device_reset: called to assert or deassert device reset line
>   * @program_key: program or evict an inline encryption key
>   * @event_notify: called to notify important events
>   */
> @@ -350,7 +350,7 @@ struct ufs_hba_variant_ops {
>  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
>  	void	(*dbg_register_dump)(struct ufs_hba *hba);
>  	int	(*phy_initialization)(struct ufs_hba *);
> -	int	(*device_reset)(struct ufs_hba *hba);
> +	int	(*device_reset)(struct ufs_hba *hba, bool asserted);
>  	void	(*config_scaling_param)(struct ufs_hba *hba,
>  					struct devfreq_dev_profile *profile,
>  					void *data);
> @@ -1216,10 +1216,10 @@ static inline void
> ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
>  		hba->vops->dbg_register_dump(hba);
>  }
> 
> -static inline int ufshcd_vops_device_reset(struct ufs_hba *hba)
> +static inline int ufshcd_vops_device_reset(struct ufs_hba *hba, bool 
> asserted)
>  {
>  	if (hba->vops && hba->vops->device_reset)
> -		return hba->vops->device_reset(hba);
> +		return hba->vops->device_reset(hba, asserted);
> 
>  	return -EOPNOTSUPP;
>  }

Reviewed-by: Can Guo <cang@codeaurora.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  parent reply	other threads:[~2020-12-23 12:18 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20201222135020epcas2p1849e621559157e76a22b808e7a802400@epcas2p1.samsung.com>
2020-12-22 13:49 ` [PATCH RFC v4 1/1] scsi: ufs: Fix ufs power down/on specs violation Ziqi Chen
2020-12-22 13:49   ` Ziqi Chen
2020-12-22 13:49   ` Ziqi Chen
2020-12-23  4:34   ` Kiwoong Kim
2020-12-23  9:33   ` Stanley Chu
2020-12-23  9:33     ` Stanley Chu
2020-12-23  9:33     ` Stanley Chu
2020-12-23 12:17   ` Can Guo [this message]
2020-12-23 12:17     ` Can Guo
2020-12-23 20:45   ` Avri Altman
2020-12-23 20:45     ` Avri Altman
2020-12-23 20:45     ` Avri Altman
2020-12-24 15:35     ` ziqichen
2020-12-24 15:35       ` ziqichen
2020-12-28 17:55   ` Bjorn Andersson
2020-12-28 17:55     ` Bjorn Andersson
2020-12-28 17:55     ` Bjorn Andersson
2020-12-29  1:18     ` Can Guo
2020-12-29  1:18       ` Can Guo
2020-12-29  1:48       ` Can Guo
2020-12-29  1:48         ` Can Guo
2021-01-04 18:59         ` Bjorn Andersson
2021-01-04 18:59           ` Bjorn Andersson
2021-01-04 18:59           ` Bjorn Andersson
2021-01-04 18:57       ` Bjorn Andersson
2021-01-04 18:57         ` Bjorn Andersson
2021-01-04 18:57         ` Bjorn Andersson
2021-01-05  1:39         ` Can Guo
2021-01-05  1:39           ` Can Guo
2021-01-04  9:15   ` Adrian Hunter
2021-01-04  9:15     ` Adrian Hunter
2021-01-04  9:15     ` Adrian Hunter
2021-01-04 18:55     ` Bjorn Andersson
2021-01-04 18:55       ` Bjorn Andersson
2021-01-04 18:55       ` Bjorn Andersson
2021-01-05  7:16       ` Adrian Hunter
2021-01-05  7:16         ` Adrian Hunter
2021-01-05  7:16         ` Adrian Hunter
2021-01-05  7:28         ` Can Guo
2021-01-05  7:28           ` Can Guo
2021-01-05  7:33           ` Adrian Hunter
2021-01-05  7:33             ` Adrian Hunter
2021-01-05  7:33             ` Adrian Hunter
2021-01-05 10:06             ` Can Guo
2021-01-05 10:06               ` Can Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2c355b51a35c7d7da6dd1ce995a4615a@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=adrian.hunter@intel.com \
    --cc=agross@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=bvanassche@acm.org \
    --cc=hongwus@codeaurora.org \
    --cc=jejb@linux.ibm.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=kernel-team@android.com \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=matthias.bgg@gmail.com \
    --cc=nguyenb@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=salyzyn@google.com \
    --cc=saravanak@google.com \
    --cc=satyat@google.com \
    --cc=stanley.chu@mediatek.com \
    --cc=vinholikatti@gmail.com \
    --cc=ziqichen@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.