* [Buildroot] Segfault on init (gcc-11, glibc-2.32-37, linux-5.13)
@ 2021-07-08 8:48 Maxim Kochetkov
2021-08-18 19:15 ` Romain Naour
0 siblings, 1 reply; 2+ messages in thread
From: Maxim Kochetkov @ 2021-07-08 8:48 UTC (permalink / raw)
To: buildroot
Hi, all!
I found such a problem on x86 (gcc-11, glibc-2.32-37, linux-5.13):
-------------------------------------------------------------------
0.0731111 Spectre 2: Spectre mitigation: kernel not compiled
with retpoli
auailablet
0.28786g atio21 segfault at 10 ip 00007f5f9a8d6e10 sp
00007fffa751f5c8 error 9 in Id-2.32.sof7f5f9a8cd000.200001
0.2882001 Code: 97 01 00 e8 12 60 00 00 98 86 9c 29 00 e9 e8 fb
ff ff Of lf 89 00 00 00 00 00 91 57 91 56 91 55 91 54 99 89
fc 55 98 89 d5 53 <69> 98 rtb 09 25 10 00 00 00 98 81 ec a0 00 00 00 98
89 79 29 10 98
0.2887921 Eernel paGame:ic - not syncing: Attempted to kill
init., exitcode=0x00000006
0.2890261 CPU: 9 I Comm: init Mot tainted 5.13.0.3 El
0 2892091 Hardware Supermicro Super SeruerAllSSH-III9F,
BIOS 2.5 11,26,020
0 2899931 Call Trace:
0 2895211 dump_stackt0x6,0x88
0 2896231 panictOxfdt0x287
0 2897161 doexit.coldt0x21,0x60
0 2898251 do_groupexittOx36,0xa0
0 2899371 get signaltOxe3t0x6f0
0 2900951 arch_do_sigoal or restarttOrd6t0x6c0
2901921 7 _rou_spin_unlock_irgrestoretOrlarOx20
0 2903981 7 force sig_ info to tasktOrcOtOxf0
0 2909891 exit to user mode preparetrd,Ox18
0 2906371 irgentryexit to user modetO0x9t0x300
0 2907811 irgentryexitt0x33,0x90
0 2908991 exc_page_faultt0x2c0Ax630
0 2910161 7 exit_to user mode preparet0x3,0x180
0 2911691 7 asmexc_page faulttOx8t0x30
0 2912981 asmexc_page_faulttOxlet0x30
BIP: 0033:0x7f5f9a8d6e10
0.2915351 Code: 97 01 00 e8 12 60 00 00 98 86 9c 29 00 e9 e8 fb
ff ff Of lf 89 00 00 00 00 00 91 57 91 56 91 55 91 54 99 89
fc 55 98 89 d5 53 <69> 98 rtb 09 25 10 00 00 00 98 81 ec a0 00 00 00 98
89 79 29 10 98
0.2921211?
0.2922851 BAX: 00007fffa751f690 BBX: 00007fffa751f6b0 BCX:
00007f5f9a8f8ae8
0 2925091 BOX: 00007fffa751f688 BSI: 00007f5f9a8f8750 EDI:
00007f5f9a8ee191
0 2927311 BBP: 00007fffa751f688 B08: 00007fffa751f6b0 B09:
0000000000000000
0 2929551 B10: 0000000070000022 Ell: 0000000000000032 B12:
00007f5f9a8ee191
0 2931771 B13: 00007f5f9a8f8750 B19: 00007fffa751f688 B15:
000000006fffff91
0 2939091 Eernel Offset: Oxl6c00000 from Oxffffffff81000000
(relocation range: Oxffffffff80000000-Oxffffffffbfffffff7
0 2937901 -I end Eeroel panic - not syncing: Attempted to kill
init, exitcode=0x00000006 1---
-------------------------------------------------------------------
I did some additional test with different gcc/libc variants:
gcc | libc | result |
---------|-----------------------|----------------|
11.1.0 | 2.32-37-g760e1d2878 | SEGFAULT |
10.3.0 | 2.32-37-g760e1d2878 | OK |
10.3.0 | uClibc-ng-1.0.38 | OK |
11.1.0 | uClibc-ng-1.0.38 | OK |
11.1.0 | uClibc-ng-1.0.38 | OK |
11.1.0 | 2.32-49-g27e892f660 | SEGFAULT |
11.1.0 | 2.33-46-gedfd11197e | OK |
---------------------------------------------------------
It seems like we need to bump glibc version to 2.33-46-gedfd11197e for
gcc 11 on x86.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Buildroot] Segfault on init (gcc-11, glibc-2.32-37, linux-5.13)
2021-07-08 8:48 [Buildroot] Segfault on init (gcc-11, glibc-2.32-37, linux-5.13) Maxim Kochetkov
@ 2021-08-18 19:15 ` Romain Naour
0 siblings, 0 replies; 2+ messages in thread
From: Romain Naour @ 2021-08-18 19:15 UTC (permalink / raw)
To: Maxim Kochetkov, buildroot; +Cc: bigunclemax, Yann E. MORIN, Thomas Petazzoni
Hello Maxim,
Le 08/07/2021 à 10:48, Maxim Kochetkov a écrit :
> Hi, all!
>
> I found such a problem on x86 (gcc-11, glibc-2.32-37, linux-5.13):
> -------------------------------------------------------------------
> 0.0731111 Spectre 2: Spectre mitigation: kernel not compiled with retpoli
> auailablet
> 0.28786g atio21 segfault at 10 ip 00007f5f9a8d6e10 sp
> 00007fffa751f5c8 error 9 in Id-2.32.sof7f5f9a8cd000.200001
> 0.2882001 Code: 97 01 00 e8 12 60 00 00 98 86 9c 29 00 e9 e8 fb ff ff Of
> lf 89 00 00 00 00 00 91 57 91 56 91 55 91 54 99 89
> fc 55 98 89 d5 53 <69> 98 rtb 09 25 10 00 00 00 98 81 ec a0 00 00 00 98 89 79 29
> 10 98
> 0.2887921 Eernel paGame:ic - not syncing: Attempted to kill init.,
> exitcode=0x00000006
> 0.2890261 CPU: 9 I Comm: init Mot tainted 5.13.0.3 El
> 0 2892091 Hardware Supermicro Super SeruerAllSSH-III9F, BIOS 2.5
> 11,26,020
> 0 2899931 Call Trace:
> 0 2895211 dump_stackt0x6,0x88
> 0 2896231 panictOxfdt0x287
> 0 2897161 doexit.coldt0x21,0x60
> 0 2898251 do_groupexittOx36,0xa0
> 0 2899371 get signaltOxe3t0x6f0
> 0 2900951 arch_do_sigoal or restarttOrd6t0x6c0
> 2901921 7 _rou_spin_unlock_irgrestoretOrlarOx20
> 0 2903981 7 force sig_ info to tasktOrcOtOxf0
> 0 2909891 exit to user mode preparetrd,Ox18
> 0 2906371 irgentryexit to user modetO0x9t0x300
> 0 2907811 irgentryexitt0x33,0x90
> 0 2908991 exc_page_faultt0x2c0Ax630
> 0 2910161 7 exit_to user mode preparet0x3,0x180
> 0 2911691 7 asmexc_page faulttOx8t0x30
> 0 2912981 asmexc_page_faulttOxlet0x30
> BIP: 0033:0x7f5f9a8d6e10
> 0.2915351 Code: 97 01 00 e8 12 60 00 00 98 86 9c 29 00 e9 e8 fb ff ff Of
> lf 89 00 00 00 00 00 91 57 91 56 91 55 91 54 99 89
> fc 55 98 89 d5 53 <69> 98 rtb 09 25 10 00 00 00 98 81 ec a0 00 00 00 98 89 79 29
> 10 98
> 0.2921211•
> 0.2922851 BAX: 00007fffa751f690 BBX: 00007fffa751f6b0 BCX: 00007f5f9a8f8ae8
> 0 2925091 BOX: 00007fffa751f688 BSI: 00007f5f9a8f8750 EDI: 00007f5f9a8ee191
> 0 2927311 BBP: 00007fffa751f688 B08: 00007fffa751f6b0 B09: 0000000000000000
> 0 2929551 B10: 0000000070000022 Ell: 0000000000000032 B12: 00007f5f9a8ee191
> 0 2931771 B13: 00007f5f9a8f8750 B19: 00007fffa751f688 B15: 000000006fffff91
> 0 2939091 Eernel Offset: Oxl6c00000 from Oxffffffff81000000 (relocation
> range: Oxffffffff80000000-Oxffffffffbfffffff7
> 0 2937901 -I end Eeroel panic - not syncing: Attempted to kill init,
> exitcode=0x00000006 1---
>
> -------------------------------------------------------------------
> I did some additional test with different gcc/libc variants:
> gcc | libc | result |
> ---------|-----------------------|----------------|
> 11.1.0 | 2.32-37-g760e1d2878 | SEGFAULT |
> 10.3.0 | 2.32-37-g760e1d2878 | OK |
> 10.3.0 | uClibc-ng-1.0.38 | OK |
> 11.1.0 | uClibc-ng-1.0.38 | OK |
> 11.1.0 | uClibc-ng-1.0.38 | OK |
> 11.1.0 | 2.32-49-g27e892f660 | SEGFAULT |
> 11.1.0 | 2.33-46-gedfd11197e | OK |
> ---------------------------------------------------------
> It seems like we need to bump glibc version to 2.33-46-gedfd11197e for gcc 11 on
> x86.
Thanks for the report, the investigation and the version bump!
Indeed, Buildroot internal toolchains are only tested with uclibc-ng thanks to
the Qemu defconfigs runtime testing in Gitlab.
The toolchain-builder project can complete this testing on musl and glibc but it
take longer time to run.
Best regards,
Romain
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-08-18 19:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-08 8:48 [Buildroot] Segfault on init (gcc-11, glibc-2.32-37, linux-5.13) Maxim Kochetkov
2021-08-18 19:15 ` Romain Naour
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.