All of lore.kernel.org
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <Claudiu.Beznea@microchip.com>, <Ludovic.Desroches@microchip.com>,
	<vkoul@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/4] dmaengine: at_xdmac: call at_xdmac_axi_config() on resume path
Date: Fri, 15 Oct 2021 07:49:16 +0000	[thread overview]
Message-ID: <2d6e2df6-93e0-311b-6a78-91b6a88bec18@microchip.com> (raw)
In-Reply-To: <20211007111230.2331837-2-claudiu.beznea@microchip.com>

On 10/7/21 2:12 PM, Claudiu Beznea wrote:
> at_xdmac could be used on SoCs which supports backup mode (where most
> of the SoC power, including power to DMA controller, is closed at suspend
> time). Thus, on resume, the settings which were previously done need to be
> restored. Do the same for axi configuration.
> 
> Fixes: f40566f220a1 ("dmaengine: at_xdmac: add AXI priority support and recommended settings")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

> ---
>  drivers/dma/at_xdmac.c | 51 ++++++++++++++++++++++--------------------
>  1 file changed, 27 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
> index ab78e0f6afd7..c66ad5706cb5 100644
> --- a/drivers/dma/at_xdmac.c
> +++ b/drivers/dma/at_xdmac.c
> @@ -1926,6 +1926,30 @@ static void at_xdmac_free_chan_resources(struct dma_chan *chan)
>  	return;
>  }
>  
> +static void at_xdmac_axi_config(struct platform_device *pdev)
> +{
> +	struct at_xdmac	*atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
> +	bool dev_m2m = false;
> +	u32 dma_requests;
> +
> +	if (!atxdmac->layout->axi_config)
> +		return; /* Not supported */
> +
> +	if (!of_property_read_u32(pdev->dev.of_node, "dma-requests",
> +				  &dma_requests)) {
> +		dev_info(&pdev->dev, "controller in mem2mem mode.\n");
> +		dev_m2m = true;
> +	}
> +
> +	if (dev_m2m) {
> +		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M);
> +		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M);
> +	} else {
> +		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M);
> +		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M);
> +	}
> +}
> +
>  #ifdef CONFIG_PM
>  static int atmel_xdmac_prepare(struct device *dev)
>  {
> @@ -1975,6 +1999,7 @@ static int atmel_xdmac_resume(struct device *dev)
>  	struct at_xdmac		*atxdmac = dev_get_drvdata(dev);
>  	struct at_xdmac_chan	*atchan;
>  	struct dma_chan		*chan, *_chan;
> +	struct platform_device	*pdev = container_of(dev, struct platform_device, dev);
>  	int			i;
>  	int ret;
>  
> @@ -1982,6 +2007,8 @@ static int atmel_xdmac_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	at_xdmac_axi_config(pdev);
> +
>  	/* Clear pending interrupts. */
>  	for (i = 0; i < atxdmac->dma.chancnt; i++) {
>  		atchan = &atxdmac->chan[i];
> @@ -2007,30 +2034,6 @@ static int atmel_xdmac_resume(struct device *dev)
>  }
>  #endif /* CONFIG_PM_SLEEP */
>  
> -static void at_xdmac_axi_config(struct platform_device *pdev)
> -{
> -	struct at_xdmac	*atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
> -	bool dev_m2m = false;
> -	u32 dma_requests;
> -
> -	if (!atxdmac->layout->axi_config)
> -		return; /* Not supported */
> -
> -	if (!of_property_read_u32(pdev->dev.of_node, "dma-requests",
> -				  &dma_requests)) {
> -		dev_info(&pdev->dev, "controller in mem2mem mode.\n");
> -		dev_m2m = true;
> -	}
> -
> -	if (dev_m2m) {
> -		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M);
> -		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M);
> -	} else {
> -		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M);
> -		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M);
> -	}
> -}
> -
>  static int at_xdmac_probe(struct platform_device *pdev)
>  {
>  	struct at_xdmac	*atxdmac;
> 


WARNING: multiple messages have this Message-ID (diff)
From: <Tudor.Ambarus@microchip.com>
To: <Claudiu.Beznea@microchip.com>, <Ludovic.Desroches@microchip.com>,
	<vkoul@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/4] dmaengine: at_xdmac: call at_xdmac_axi_config() on resume path
Date: Fri, 15 Oct 2021 07:49:16 +0000	[thread overview]
Message-ID: <2d6e2df6-93e0-311b-6a78-91b6a88bec18@microchip.com> (raw)
In-Reply-To: <20211007111230.2331837-2-claudiu.beznea@microchip.com>

On 10/7/21 2:12 PM, Claudiu Beznea wrote:
> at_xdmac could be used on SoCs which supports backup mode (where most
> of the SoC power, including power to DMA controller, is closed at suspend
> time). Thus, on resume, the settings which were previously done need to be
> restored. Do the same for axi configuration.
> 
> Fixes: f40566f220a1 ("dmaengine: at_xdmac: add AXI priority support and recommended settings")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

> ---
>  drivers/dma/at_xdmac.c | 51 ++++++++++++++++++++++--------------------
>  1 file changed, 27 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
> index ab78e0f6afd7..c66ad5706cb5 100644
> --- a/drivers/dma/at_xdmac.c
> +++ b/drivers/dma/at_xdmac.c
> @@ -1926,6 +1926,30 @@ static void at_xdmac_free_chan_resources(struct dma_chan *chan)
>  	return;
>  }
>  
> +static void at_xdmac_axi_config(struct platform_device *pdev)
> +{
> +	struct at_xdmac	*atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
> +	bool dev_m2m = false;
> +	u32 dma_requests;
> +
> +	if (!atxdmac->layout->axi_config)
> +		return; /* Not supported */
> +
> +	if (!of_property_read_u32(pdev->dev.of_node, "dma-requests",
> +				  &dma_requests)) {
> +		dev_info(&pdev->dev, "controller in mem2mem mode.\n");
> +		dev_m2m = true;
> +	}
> +
> +	if (dev_m2m) {
> +		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M);
> +		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M);
> +	} else {
> +		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M);
> +		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M);
> +	}
> +}
> +
>  #ifdef CONFIG_PM
>  static int atmel_xdmac_prepare(struct device *dev)
>  {
> @@ -1975,6 +1999,7 @@ static int atmel_xdmac_resume(struct device *dev)
>  	struct at_xdmac		*atxdmac = dev_get_drvdata(dev);
>  	struct at_xdmac_chan	*atchan;
>  	struct dma_chan		*chan, *_chan;
> +	struct platform_device	*pdev = container_of(dev, struct platform_device, dev);
>  	int			i;
>  	int ret;
>  
> @@ -1982,6 +2007,8 @@ static int atmel_xdmac_resume(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> +	at_xdmac_axi_config(pdev);
> +
>  	/* Clear pending interrupts. */
>  	for (i = 0; i < atxdmac->dma.chancnt; i++) {
>  		atchan = &atxdmac->chan[i];
> @@ -2007,30 +2034,6 @@ static int atmel_xdmac_resume(struct device *dev)
>  }
>  #endif /* CONFIG_PM_SLEEP */
>  
> -static void at_xdmac_axi_config(struct platform_device *pdev)
> -{
> -	struct at_xdmac	*atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
> -	bool dev_m2m = false;
> -	u32 dma_requests;
> -
> -	if (!atxdmac->layout->axi_config)
> -		return; /* Not supported */
> -
> -	if (!of_property_read_u32(pdev->dev.of_node, "dma-requests",
> -				  &dma_requests)) {
> -		dev_info(&pdev->dev, "controller in mem2mem mode.\n");
> -		dev_m2m = true;
> -	}
> -
> -	if (dev_m2m) {
> -		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M);
> -		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M);
> -	} else {
> -		at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M);
> -		at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M);
> -	}
> -}
> -
>  static int at_xdmac_probe(struct platform_device *pdev)
>  {
>  	struct at_xdmac	*atxdmac;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-10-15  7:49 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-07 11:12 [PATCH 0/4] dmaengine: at_xdmac: fixes and code enhancements Claudiu Beznea
2021-10-07 11:12 ` Claudiu Beznea
2021-10-07 11:12 ` [PATCH 1/4] dmaengine: at_xdmac: call at_xdmac_axi_config() on resume path Claudiu Beznea
2021-10-07 11:12   ` Claudiu Beznea
2021-10-15  7:49   ` Tudor.Ambarus [this message]
2021-10-15  7:49     ` Tudor.Ambarus
2021-10-07 11:12 ` [PATCH 2/4] dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro Claudiu Beznea
2021-10-07 11:12   ` Claudiu Beznea
2021-10-15  7:50   ` Tudor.Ambarus
2021-10-15  7:50     ` Tudor.Ambarus
2021-10-07 11:12 ` [PATCH 3/4] dmaengine: at_xdmac: use __maybe_unused for pm functions Claudiu Beznea
2021-10-07 11:12   ` Claudiu Beznea
2021-10-15  8:01   ` Tudor.Ambarus
2021-10-15  8:01     ` Tudor.Ambarus
2021-10-07 11:12 ` [PATCH 4/4] dmaengine: at_xdmac: use pm_ptr() Claudiu Beznea
2021-10-07 11:12   ` Claudiu Beznea
2021-10-15  8:03   ` Tudor.Ambarus
2021-10-15  8:03     ` Tudor.Ambarus
2021-10-18  6:12 ` [PATCH 0/4] dmaengine: at_xdmac: fixes and code enhancements Vinod Koul
2021-10-18  6:12   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2d6e2df6-93e0-311b-6a78-91b6a88bec18@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.