Re: [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform

[AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>]

Il 07/09/21 15:04, Bjorn Andersson ha scritto:
> On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:
> 
>> This commit introduces support for the Sony Yoshino platform, using
>> the MSM8998 SoC, including:
>> - Sony Xperia XZ1 (codename Poplar),
>> - Sony Xperia XZ1 Compact (codename Lilac),
>> - Sony Xperia XZ Premium (codename Maple).
>>
> 
> Nice!
> 
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> [..]
>> +	vph_pwr: vph-pwr-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	gpio_keys {
> 
> Please don't use '_' in node names.
> 

Sorry, all of that is fixed.

>> +	reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: memory@85800000 {
>> +			reg = <0x0 0x85800000 0x0 0x3700000>;
>> +			no-map;
>> +		};
>> +
>> +		cont_splash_mem: cont-splash-region@9d400000 {
> 
> Is there any reason for not just naming this "memory"?
> 

No, there's no reason. Changed to 'memory'.

>> +			compatible = "shared-dma-pool";
>> +			reg = <0x0 0xf6400000 0x0 0x2000>;
>> +			no-map;
>> +		};
>> +
> [..]
>> +&rpm_requests {
>> +	pm8998-regulators {
>> +		compatible = "qcom,rpm-pm8998-regulators";
>> +
> [..]
>> +		vreg_lvs1a_1p8: lvs1 { };
>> +		vreg_lvs2a_1p8: lvs2 { };
>> +
> 
> Blank line.
> 

Done.

Also, we had a better internal review of the 8998 dt patches, so in the
next version there will be even more cleanups.

>> +	};
>> +
>> +	pmi8998-regulators {
>> +		compatible = "qcom,rpm-pmi8998-regulators";
>> +
>> +		vdd_bob-supply = <&vph_pwr>;
>> +
>> +		vreg_bob: bob {
>> +			regulator-min-microvolt = <3312000>;
>> +			regulator-max-microvolt = <3600000>;
>> +		};
>> +	};
>> +};
>> +
>> +&sdhc2 {
>> +	status = "okay";
>> +	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
>> +
>> +	vmmc-supply = <&vreg_l21a_2p95>;
>> +	vqmmc-supply = <&vreg_l13a_2p95>;
>> +
>> +	pinctrl-names = "default", "sleep";
>> +	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on  &sdc2_data_on  &sdc2_cd_on>;
>> +	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> 
> How about grouping these various pins as "sdc2_default_state" and
> "sdc2_sleep_state"?
> 

I agree with you on the fact that groping these pins would look way better,
but I'm inheriting the sdc2 pinctrl from msm8998.dtsi and... all of the msm8998
boards, including msm8998-mtp and msm8998-clamshell (and whatever else inherits
these) are doing the same as what I am doing here.

That said, are you proposing to change 'em all?

Cheers,
- Angelo

>> +};
>> +
> Regards,
> Bjorn
>