* MegaRaid SAS 9341-8i issue
@ 2021-03-28 16:56 Frédéric Pierret
2021-03-29 6:24 ` Kashyap Desai
0 siblings, 1 reply; 6+ messages in thread
From: Frédéric Pierret @ 2021-03-28 16:56 UTC (permalink / raw)
To: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen
Cc: megaraidlinux.pdl, linux-scsi
[-- Attachment #1.1: Type: text/plain, Size: 3033 bytes --]
Hi,
I'm having issue with a MegaRaid 9341-8i card which is properly working on two motherboards (kernel-5.10.25 and kernel-5.11.10) but not on a third for which I want it to work. I originally received this card with a firmware from 2018 and I've updated it to the latest from Broadcom website (24.21.0-0148) but in both cases, I've the same issue on the third motherboard:
[ 14.013135] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's base_addr(phys):0x00000000fe800000 mapped virt_addr:0x(ptrval)
[ 14.013142] megaraid_sas 0000:01:00.0: FW now in Ready state
[ 14.013148] megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit consistent mask
[ 14.013933] megaraid_sas 0000:01:00.0: firmware supports msix : (96)
[ 14.014439] megaraid_sas 0000:01:00.0: requested/available msix 5/5
[ 14.014445] megaraid_sas 0000:01:00.0: current msix/online cpus : (5/4)
[ 14.014447] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
[ 14.014453] megaraid_sas 0000:01:00.0: Current firmware supports maximum commands: 272 LDIO threshold: 237
[ 14.014631] megaraid_sas 0000:01:00.0: Configured max firmware commands: 271
[ 14.015377] megaraid_sas 0000:01:00.0: Performance mode :Latency
[ 14.015380] megaraid_sas 0000:01:00.0: FW supports sync cache : Yes
[ 14.015388] megaraid_sas 0000:01:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 14.037098] megaraid_sas 0000:01:00.0: Init cmd return status FAILED for SCSI host 2
[ 14.037762] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6399
Trying to rmmod then modprobe leads to something that looks like stuck state or such:
[ 570.269770] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's base_addr(phys):0x00000000fe800000 mapped virt_addr:0x00000000f42ba0e1
[ 570.269775] megaraid_sas 0000:01:00.0: Waiting for FW to come to ready state
[ 570.269780] megaraid_sas 0000:01:00.0: FW in FAULT state, Fault code:0x10000 subcode:0x0 func:megasas_transition_to_ready
[ 570.269782] megaraid_sas 0000:01:00.0: System Register set:
(***)
[ 570.269908] megaraid_sas 0000:01:00.0: Failed to transition controller to ready from megasas_init_fw!
[ 570.269919] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 639
The motherboard which is not working is a recent one: Asrock X570D4U-2L2T with a Ryzen 3900XT.
I've read a lot of things on internet saying that might be CSM issues or such but no luck with that. On the two working motherboards, it works in legacy/UEFI only. I've also tested the card on a x16 or x8 slots, the same result. I've attempted to build megaraid driver provided from Broadcom (07.716.01.00-2). Up to a slight adjustment in a log call using older attribute "host_busy", I'm hitting an unrelated issue due to KBUILD_CFLAGS recursion in arch/x86/Makefile.
After hours and hours of testing, I'm currently out of ideas. Does anyone has an idea or could help me into adding useful debug info in the driver or such?
Thank very much in advance,
Frédéric
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: MegaRaid SAS 9341-8i issue
2021-03-28 16:56 MegaRaid SAS 9341-8i issue Frédéric Pierret
@ 2021-03-29 6:24 ` Kashyap Desai
[not found] ` <12383f2a-9f7b-ea95-ff52-785b91c1bac8@qubes-os.org>
0 siblings, 1 reply; 6+ messages in thread
From: Kashyap Desai @ 2021-03-29 6:24 UTC (permalink / raw)
To: Frédéric Pierret, Sumit Saxena,
Shivasharan Srikanteshwara, jejb, martin.petersen
Cc: PDL,MEGARAIDLINUX, linux-scsi
[-- Attachment #1: Type: text/plain, Size: 3818 bytes --]
Hi -
Can you send us full dmesg logs of each working and non-working case. ?
On 3rd motherboard was it any working combination of kernel, driver and FW ?
OR it never worked on 3rd mother board ?
Kashyap
> -----Original Message-----
> From: Frédéric Pierret [mailto:frederic.pierret@qubes-os.org]
> Sent: Sunday, March 28, 2021 10:26 PM
> To: kashyap.desai@broadcom.com; sumit.saxena@broadcom.com;
> shivasharan.srikanteshwara@broadcom.com; jejb@linux.ibm.com;
> martin.petersen@oracle.com
> Cc: megaraidlinux.pdl@broadcom.com; linux-scsi@vger.kernel.org
> Subject: MegaRaid SAS 9341-8i issue
>
> Hi,
>
> I'm having issue with a MegaRaid 9341-8i card which is properly working on
> two motherboards (kernel-5.10.25 and kernel-5.11.10) but not on a third
> for
> which I want it to work. I originally received this card with a firmware
> from
> 2018 and I've updated it to the latest from Broadcom website
> (24.21.0-0148)
> but in both cases, I've the same issue on the third motherboard:
>
> [ 14.013135] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
> base_addr(phys):0x00000000fe800000 mapped virt_addr:0x(ptrval)
> [ 14.013142] megaraid_sas 0000:01:00.0: FW now in Ready state
> [ 14.013148] megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit
> consistent mask
> [ 14.013933] megaraid_sas 0000:01:00.0: firmware supports msix :
> (96)
> [ 14.014439] megaraid_sas 0000:01:00.0: requested/available msix 5/5
> [ 14.014445] megaraid_sas 0000:01:00.0: current msix/online cpus :
> (5/4)
> [ 14.014447] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
> [ 14.014453] megaraid_sas 0000:01:00.0: Current firmware supports
> maximum commands: 272 LDIO threshold: 237
> [ 14.014631] megaraid_sas 0000:01:00.0: Configured max firmware
> commands: 271
> [ 14.015377] megaraid_sas 0000:01:00.0: Performance mode :Latency
> [ 14.015380] megaraid_sas 0000:01:00.0: FW supports sync cache :
> Yes
> [ 14.015388] megaraid_sas 0000:01:00.0: megasas_disable_intr_fusion is
> called outbound_intr_mask:0x40000009
> [ 14.037098] megaraid_sas 0000:01:00.0: Init cmd return status FAILED
> for
> SCSI host 2
> [ 14.037762] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6399
>
> Trying to rmmod then modprobe leads to something that looks like stuck
> state or such:
>
> [ 570.269770] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
> base_addr(phys):0x00000000fe800000 mapped
> virt_addr:0x00000000f42ba0e1 [ 570.269775] megaraid_sas 0000:01:00.0:
> Waiting for FW to come to ready state [ 570.269780] megaraid_sas
> 0000:01:00.0: FW in FAULT state, Fault code:0x10000 subcode:0x0
> func:megasas_transition_to_ready [ 570.269782] megaraid_sas
> 0000:01:00.0: System Register set:
> (***)
> [ 570.269908] megaraid_sas 0000:01:00.0: Failed to transition controller
> to
> ready from megasas_init_fw!
> [ 570.269919] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 639
>
> The motherboard which is not working is a recent one: Asrock X570D4U-2L2T
> with a Ryzen 3900XT.
>
> I've read a lot of things on internet saying that might be CSM issues or
> such
> but no luck with that. On the two working motherboards, it works in
> legacy/UEFI only. I've also tested the card on a x16 or x8 slots, the same
> result. I've attempted to build megaraid driver provided from Broadcom
> (07.716.01.00-2). Up to a slight adjustment in a log call using older
> attribute
> "host_busy", I'm hitting an unrelated issue due to KBUILD_CFLAGS recursion
> in arch/x86/Makefile.
>
> After hours and hours of testing, I'm currently out of ideas. Does anyone
> has
> an idea or could help me into adding useful debug info in the driver or
> such?
>
> Thank very much in advance,
> Frédéric
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MegaRaid SAS 9341-8i issue
[not found] ` <12383f2a-9f7b-ea95-ff52-785b91c1bac8@qubes-os.org>
@ 2021-04-09 6:25 ` Frédéric Pierret
2021-04-12 12:04 ` Sumit Saxena
0 siblings, 1 reply; 6+ messages in thread
From: Frédéric Pierret @ 2021-04-09 6:25 UTC (permalink / raw)
To: Kashyap Desai, Sumit Saxena, Shivasharan Srikanteshwara, jejb,
martin.petersen
Cc: PDL,MEGARAIDLINUX, linux-scsi
[-- Attachment #1.1: Type: text/plain, Size: 4904 bytes --]
Hi,
Le 3/29/21 à 11:02 AM, Frédéric Pierret a écrit :
> Hi,
> First of all, thank you very much for your answer.
>
> Le 3/29/21 à 8:24 AM, Kashyap Desai a écrit :
>> Hi -
>>
>> Can you send us full dmesg logs of each working and non-working case. ?
>
> I've attached you the working case of one of the two motherboard, referenced here as ASUS, and the nonworking case on the third motherboard, referenced here as ASROCK. In both cases, I've attached you the full dmesg of the same LiveUSB a Fedora 33 with also the full dmesg when I do a rmmod and modprobe of megaraid_sas.
>
>> On 3rd motherboard was it any working combination of kernel, driver and FW ?
>> OR it never worked on 3rd mother board ?
>
> Unfortunately, no combination has worked on the ASROCK (third motherboard) (before or after firmware upgrade, multiple kernel versions (5.10.X and 5.11.Y), drivers)
>
>> Kashyap
>>
>>> -----Original Message-----
>>> From: Frédéric Pierret [mailto:frederic.pierret@qubes-os.org]
>>> Sent: Sunday, March 28, 2021 10:26 PM
>>> To: kashyap.desai@broadcom.com; sumit.saxena@broadcom.com;
>>> shivasharan.srikanteshwara@broadcom.com; jejb@linux.ibm.com;
>>> martin.petersen@oracle.com
>>> Cc: megaraidlinux.pdl@broadcom.com; linux-scsi@vger.kernel.org
>>> Subject: MegaRaid SAS 9341-8i issue
>>>
>>> Hi,
>>>
>>> I'm having issue with a MegaRaid 9341-8i card which is properly working on
>>> two motherboards (kernel-5.10.25 and kernel-5.11.10) but not on a third
>>> for
>>> which I want it to work. I originally received this card with a firmware
>>> from
>>> 2018 and I've updated it to the latest from Broadcom website
>>> (24.21.0-0148)
>>> but in both cases, I've the same issue on the third motherboard:
>>>
>>> [ 14.013135] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
>>> base_addr(phys):0x00000000fe800000 mapped virt_addr:0x(ptrval)
>>> [ 14.013142] megaraid_sas 0000:01:00.0: FW now in Ready state
>>> [ 14.013148] megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit
>>> consistent mask
>>> [ 14.013933] megaraid_sas 0000:01:00.0: firmware supports msix :
>>> (96)
>>> [ 14.014439] megaraid_sas 0000:01:00.0: requested/available msix 5/5
>>> [ 14.014445] megaraid_sas 0000:01:00.0: current msix/online cpus :
>>> (5/4)
>>> [ 14.014447] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
>>> [ 14.014453] megaraid_sas 0000:01:00.0: Current firmware supports
>>> maximum commands: 272 LDIO threshold: 237
>>> [ 14.014631] megaraid_sas 0000:01:00.0: Configured max firmware
>>> commands: 271
>>> [ 14.015377] megaraid_sas 0000:01:00.0: Performance mode :Latency
>>> [ 14.015380] megaraid_sas 0000:01:00.0: FW supports sync cache :
>>> Yes
>>> [ 14.015388] megaraid_sas 0000:01:00.0: megasas_disable_intr_fusion is
>>> called outbound_intr_mask:0x40000009
>>> [ 14.037098] megaraid_sas 0000:01:00.0: Init cmd return status FAILED
>>> for
>>> SCSI host 2
>>> [ 14.037762] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6399
>>>
>>> Trying to rmmod then modprobe leads to something that looks like stuck
>>> state or such:
>>>
>>> [ 570.269770] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
>>> base_addr(phys):0x00000000fe800000 mapped
>>> virt_addr:0x00000000f42ba0e1 [ 570.269775] megaraid_sas 0000:01:00.0:
>>> Waiting for FW to come to ready state [ 570.269780] megaraid_sas
>>> 0000:01:00.0: FW in FAULT state, Fault code:0x10000 subcode:0x0
>>> func:megasas_transition_to_ready [ 570.269782] megaraid_sas
>>> 0000:01:00.0: System Register set:
>>> (***)
>>> [ 570.269908] megaraid_sas 0000:01:00.0: Failed to transition controller
>>> to
>>> ready from megasas_init_fw!
>>> [ 570.269919] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 639
>>>
>>> The motherboard which is not working is a recent one: Asrock X570D4U-2L2T
>>> with a Ryzen 3900XT.
>>>
>>> I've read a lot of things on internet saying that might be CSM issues or
>>> such
>>> but no luck with that. On the two working motherboards, it works in
>>> legacy/UEFI only. I've also tested the card on a x16 or x8 slots, the same
>>> result. I've attempted to build megaraid driver provided from Broadcom
>>> (07.716.01.00-2). Up to a slight adjustment in a log call using older
>>> attribute
>>> "host_busy", I'm hitting an unrelated issue due to KBUILD_CFLAGS recursion
>>> in arch/x86/Makefile.
>>>
>>> After hours and hours of testing, I'm currently out of ideas. Does anyone
>>> has
>>> an idea or could help me into adding useful debug info in the driver or
>>> such?
>>>
>>> Thank very much in advance,
>>> Frédéric
>
> Best regards,
> Frédéric
Is there something more I could provide and help into troubleshooting this issue?
Best regards,
Frédéric
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MegaRaid SAS 9341-8i issue
2021-04-09 6:25 ` Frédéric Pierret
@ 2021-04-12 12:04 ` Sumit Saxena
2021-04-14 10:38 ` Frédéric Pierret
0 siblings, 1 reply; 6+ messages in thread
From: Sumit Saxena @ 2021-04-12 12:04 UTC (permalink / raw)
To: Frédéric Pierret
Cc: Kashyap Desai, Shivasharan Srikanteshwara, James E.J. Bottomley,
Martin K. Petersen, PDL,MEGARAIDLINUX, Linux SCSI List
[-- Attachment #1: Type: text/plain, Size: 5936 bytes --]
On Fri, Apr 9, 2021 at 11:55 AM Frédéric Pierret
<frederic.pierret@qubes-os.org> wrote:
>
> Hi,
>
> Le 3/29/21 à 11:02 AM, Frédéric Pierret a écrit :
> > Hi,
> > First of all, thank you very much for your answer.
> >
> > Le 3/29/21 à 8:24 AM, Kashyap Desai a écrit :
> >> Hi -
> >>
> >> Can you send us full dmesg logs of each working and non-working case. ?
> >
> > I've attached you the working case of one of the two motherboard, referenced here as ASUS, and the nonworking case on the third motherboard, referenced here as ASROCK. In both cases, I've attached you the full dmesg of the same LiveUSB a Fedora 33 with also the full dmesg when I do a rmmod and modprobe of megaraid_sas.
> >
> >> On 3rd motherboard was it any working combination of kernel, driver and FW ?
> >> OR it never worked on 3rd mother board ?
> >
> > Unfortunately, no combination has worked on the ASROCK (third motherboard) (before or after firmware upgrade, multiple kernel versions (5.10.X and 5.11.Y), drivers)
> >
> >> Kashyap
> >>
> >>> -----Original Message-----
> >>> From: Frédéric Pierret [mailto:frederic.pierret@qubes-os.org]
> >>> Sent: Sunday, March 28, 2021 10:26 PM
> >>> To: kashyap.desai@broadcom.com; sumit.saxena@broadcom.com;
> >>> shivasharan.srikanteshwara@broadcom.com; jejb@linux.ibm.com;
> >>> martin.petersen@oracle.com
> >>> Cc: megaraidlinux.pdl@broadcom.com; linux-scsi@vger.kernel.org
> >>> Subject: MegaRaid SAS 9341-8i issue
> >>>
> >>> Hi,
> >>>
> >>> I'm having issue with a MegaRaid 9341-8i card which is properly working on
> >>> two motherboards (kernel-5.10.25 and kernel-5.11.10) but not on a third
> >>> for
> >>> which I want it to work. I originally received this card with a firmware
> >>> from
> >>> 2018 and I've updated it to the latest from Broadcom website
> >>> (24.21.0-0148)
> >>> but in both cases, I've the same issue on the third motherboard:
> >>>
> >>> [ 14.013135] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
> >>> base_addr(phys):0x00000000fe800000 mapped virt_addr:0x(ptrval)
> >>> [ 14.013142] megaraid_sas 0000:01:00.0: FW now in Ready state
> >>> [ 14.013148] megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit
> >>> consistent mask
> >>> [ 14.013933] megaraid_sas 0000:01:00.0: firmware supports msix :
> >>> (96)
> >>> [ 14.014439] megaraid_sas 0000:01:00.0: requested/available msix 5/5
> >>> [ 14.014445] megaraid_sas 0000:01:00.0: current msix/online cpus :
> >>> (5/4)
> >>> [ 14.014447] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
> >>> [ 14.014453] megaraid_sas 0000:01:00.0: Current firmware supports
> >>> maximum commands: 272 LDIO threshold: 237
> >>> [ 14.014631] megaraid_sas 0000:01:00.0: Configured max firmware
> >>> commands: 271
> >>> [ 14.015377] megaraid_sas 0000:01:00.0: Performance mode :Latency
> >>> [ 14.015380] megaraid_sas 0000:01:00.0: FW supports sync cache :
> >>> Yes
> >>> [ 14.015388] megaraid_sas 0000:01:00.0: megasas_disable_intr_fusion is
> >>> called outbound_intr_mask:0x40000009
> >>> [ 14.037098] megaraid_sas 0000:01:00.0: Init cmd return status FAILED
> >>> for
> >>> SCSI host 2
> >>> [ 14.037762] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6399
> >>>
> >>> Trying to rmmod then modprobe leads to something that looks like stuck
> >>> state or such:
> >>>
> >>> [ 570.269770] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
> >>> base_addr(phys):0x00000000fe800000 mapped
> >>> virt_addr:0x00000000f42ba0e1 [ 570.269775] megaraid_sas 0000:01:00.0:
> >>> Waiting for FW to come to ready state [ 570.269780] megaraid_sas
> >>> 0000:01:00.0: FW in FAULT state, Fault code:0x10000 subcode:0x0
> >>> func:megasas_transition_to_ready [ 570.269782] megaraid_sas
> >>> 0000:01:00.0: System Register set:
> >>> (***)
> >>> [ 570.269908] megaraid_sas 0000:01:00.0: Failed to transition controller
> >>> to
> >>> ready from megasas_init_fw!
> >>> [ 570.269919] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 639
> >>>
> >>> The motherboard which is not working is a recent one: Asrock X570D4U-2L2T
> >>> with a Ryzen 3900XT.
> >>>
> >>> I've read a lot of things on internet saying that might be CSM issues or
> >>> such
> >>> but no luck with that. On the two working motherboards, it works in
> >>> legacy/UEFI only. I've also tested the card on a x16 or x8 slots, the same
> >>> result. I've attempted to build megaraid driver provided from Broadcom
> >>> (07.716.01.00-2). Up to a slight adjustment in a log call using older
> >>> attribute
> >>> "host_busy", I'm hitting an unrelated issue due to KBUILD_CFLAGS recursion
> >>> in arch/x86/Makefile.
> >>>
> >>> After hours and hours of testing, I'm currently out of ideas. Does anyone
> >>> has
> >>> an idea or could help me into adding useful debug info in the driver or
> >>> such?
> >>>
> >>> Thank very much in advance,
> >>> Frédéric
> >
> > Best regards,
> > Frédéric
>
> Is there something more I could provide and help into troubleshooting this issue?
First time driver load fails due to IOC INIT failure(writeq API is
used to fire IOC INIT to firmware).
We have seen writeq does not work on a few platforms.
Please try if below change fixes your issue:
diff --git a/megaraid_sas_fusion.c b/megaraid_sas_fusion.c
index 432a0bb..24ef592 100644
--- a/megaraid_sas_fusion.c
+++ b/megaraid_sas_fusion.c
@@ -291,7 +293,8 @@ static void
megasas_write_64bit_req_desc(struct megasas_instance *instance,
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc)
{
-#if defined(writeq) && defined(CONFIG_64BIT)
+//#if defined(writeq) && defined(CONFIG_64BIT)
+#if 0
u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) |
le32_to_cpu(req_desc->u.low));
writeq(req_data, &instance->reg_set->inbound_low_queue_port)
Thanks,
Sumit
>
> Best regards,
> Frédéric
>
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: MegaRaid SAS 9341-8i issue
2021-04-12 12:04 ` Sumit Saxena
@ 2021-04-14 10:38 ` Frédéric Pierret
2021-04-14 11:17 ` Sumit Saxena
0 siblings, 1 reply; 6+ messages in thread
From: Frédéric Pierret @ 2021-04-14 10:38 UTC (permalink / raw)
To: Sumit Saxena
Cc: Kashyap Desai, Shivasharan Srikanteshwara, James E.J. Bottomley,
Martin K. Petersen, PDL,MEGARAIDLINUX, Linux SCSI List
[-- Attachment #1.1.1: Type: text/plain, Size: 7135 bytes --]
Hi Sumit,
Le 4/12/21 à 2:04 PM, Sumit Saxena a écrit :
> On Fri, Apr 9, 2021 at 11:55 AM Frédéric Pierret
> <frederic.pierret@qubes-os.org> wrote:
>>
>> Hi,
>>
>> Le 3/29/21 à 11:02 AM, Frédéric Pierret a écrit :
>>> Hi,
>>> First of all, thank you very much for your answer.
>>>
>>> Le 3/29/21 à 8:24 AM, Kashyap Desai a écrit :
>>>> Hi -
>>>>
>>>> Can you send us full dmesg logs of each working and non-working case. ?
>>>
>>> I've attached you the working case of one of the two motherboard, referenced here as ASUS, and the nonworking case on the third motherboard, referenced here as ASROCK. In both cases, I've attached you the full dmesg of the same LiveUSB a Fedora 33 with also the full dmesg when I do a rmmod and modprobe of megaraid_sas.
>>>
>>>> On 3rd motherboard was it any working combination of kernel, driver and FW ?
>>>> OR it never worked on 3rd mother board ?
>>>
>>> Unfortunately, no combination has worked on the ASROCK (third motherboard) (before or after firmware upgrade, multiple kernel versions (5.10.X and 5.11.Y), drivers)
>>>
>>>> Kashyap
>>>>
>>>>> -----Original Message-----
>>>>> From: Frédéric Pierret [mailto:frederic.pierret@qubes-os.org]
>>>>> Sent: Sunday, March 28, 2021 10:26 PM
>>>>> To: kashyap.desai@broadcom.com; sumit.saxena@broadcom.com;
>>>>> shivasharan.srikanteshwara@broadcom.com; jejb@linux.ibm.com;
>>>>> martin.petersen@oracle.com
>>>>> Cc: megaraidlinux.pdl@broadcom.com; linux-scsi@vger.kernel.org
>>>>> Subject: MegaRaid SAS 9341-8i issue
>>>>>
>>>>> Hi,
>>>>>
>>>>> I'm having issue with a MegaRaid 9341-8i card which is properly working on
>>>>> two motherboards (kernel-5.10.25 and kernel-5.11.10) but not on a third
>>>>> for
>>>>> which I want it to work. I originally received this card with a firmware
>>>>> from
>>>>> 2018 and I've updated it to the latest from Broadcom website
>>>>> (24.21.0-0148)
>>>>> but in both cases, I've the same issue on the third motherboard:
>>>>>
>>>>> [ 14.013135] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
>>>>> base_addr(phys):0x00000000fe800000 mapped virt_addr:0x(ptrval)
>>>>> [ 14.013142] megaraid_sas 0000:01:00.0: FW now in Ready state
>>>>> [ 14.013148] megaraid_sas 0000:01:00.0: 63 bit DMA mask and 32 bit
>>>>> consistent mask
>>>>> [ 14.013933] megaraid_sas 0000:01:00.0: firmware supports msix :
>>>>> (96)
>>>>> [ 14.014439] megaraid_sas 0000:01:00.0: requested/available msix 5/5
>>>>> [ 14.014445] megaraid_sas 0000:01:00.0: current msix/online cpus :
>>>>> (5/4)
>>>>> [ 14.014447] megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
>>>>> [ 14.014453] megaraid_sas 0000:01:00.0: Current firmware supports
>>>>> maximum commands: 272 LDIO threshold: 237
>>>>> [ 14.014631] megaraid_sas 0000:01:00.0: Configured max firmware
>>>>> commands: 271
>>>>> [ 14.015377] megaraid_sas 0000:01:00.0: Performance mode :Latency
>>>>> [ 14.015380] megaraid_sas 0000:01:00.0: FW supports sync cache :
>>>>> Yes
>>>>> [ 14.015388] megaraid_sas 0000:01:00.0: megasas_disable_intr_fusion is
>>>>> called outbound_intr_mask:0x40000009
>>>>> [ 14.037098] megaraid_sas 0000:01:00.0: Init cmd return status FAILED
>>>>> for
>>>>> SCSI host 2
>>>>> [ 14.037762] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6399
>>>>>
>>>>> Trying to rmmod then modprobe leads to something that looks like stuck
>>>>> state or such:
>>>>>
>>>>> [ 570.269770] megaraid_sas 0000:01:00.0: BAR:0x1 BAR's
>>>>> base_addr(phys):0x00000000fe800000 mapped
>>>>> virt_addr:0x00000000f42ba0e1 [ 570.269775] megaraid_sas 0000:01:00.0:
>>>>> Waiting for FW to come to ready state [ 570.269780] megaraid_sas
>>>>> 0000:01:00.0: FW in FAULT state, Fault code:0x10000 subcode:0x0
>>>>> func:megasas_transition_to_ready [ 570.269782] megaraid_sas
>>>>> 0000:01:00.0: System Register set:
>>>>> (***)
>>>>> [ 570.269908] megaraid_sas 0000:01:00.0: Failed to transition controller
>>>>> to
>>>>> ready from megasas_init_fw!
>>>>> [ 570.269919] megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 639
>>>>>
>>>>> The motherboard which is not working is a recent one: Asrock X570D4U-2L2T
>>>>> with a Ryzen 3900XT.
>>>>>
>>>>> I've read a lot of things on internet saying that might be CSM issues or
>>>>> such
>>>>> but no luck with that. On the two working motherboards, it works in
>>>>> legacy/UEFI only. I've also tested the card on a x16 or x8 slots, the same
>>>>> result. I've attempted to build megaraid driver provided from Broadcom
>>>>> (07.716.01.00-2). Up to a slight adjustment in a log call using older
>>>>> attribute
>>>>> "host_busy", I'm hitting an unrelated issue due to KBUILD_CFLAGS recursion
>>>>> in arch/x86/Makefile.
>>>>>
>>>>> After hours and hours of testing, I'm currently out of ideas. Does anyone
>>>>> has
>>>>> an idea or could help me into adding useful debug info in the driver or
>>>>> such?
>>>>>
>>>>> Thank very much in advance,
>>>>> Frédéric
>>>
>>> Best regards,
>>> Frédéric
>>
>> Is there something more I could provide and help into troubleshooting this issue?
> First time driver load fails due to IOC INIT failure(writeq API is
> used to fire IOC INIT to firmware).
> We have seen writeq does not work on a few platforms.
> Please try if below change fixes your issue:
>
> diff --git a/megaraid_sas_fusion.c b/megaraid_sas_fusion.c
> index 432a0bb..24ef592 100644
> --- a/megaraid_sas_fusion.c
> +++ b/megaraid_sas_fusion.c
> @@ -291,7 +293,8 @@ static void
> megasas_write_64bit_req_desc(struct megasas_instance *instance,
> union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc)
> {
> -#if defined(writeq) && defined(CONFIG_64BIT)
> +//#if defined(writeq) && defined(CONFIG_64BIT)
> +#if 0
> u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) |
> le32_to_cpu(req_desc->u.low));
> writeq(req_data, &instance->reg_set->inbound_low_queue_port)
>
> Thanks,
> Sumit
>>
>> Best regards,
>> Frédéric
>>
Thank you for the patch. I've tested your patch on a 5.10.28 kernel but unfortunately it does not change the driver load behavior. I've attached the dmesg. Don't pay attention to the "qubes" tag in kernel, I've just used the same spec for building the test kernel than we do in QubesOS but here it's a standard Fedora kernel config and build for this 5.10.28 + standard kernel source.
What I can tell is that the card is found at the BIOS POST (the controller appears and proposes to go into controller).
Are you eventually aware a working 9341-8i on a motherboard X570 chipset? Just thinking if that could be related or not. I've also tried once again to change PCIe lanes but that's not helping. I've also checked that the current PCIe 4.0 supports PCIe 3.0 according to the manual (https://download.asrock.com/Manual/X570D4U-2L2T.pdf). A last point, I've only filled the two NVMe ports with standard NVMe drives (Samsung 970 256G) and I'm not having any other extension so I would not think it's related to lack of lanes or such?
Best regards,
Frédéric
[-- Attachment #1.1.2: dmesg_patch.log --]
[-- Type: text/x-log, Size: 103782 bytes --]
[ 0.000000] Linux version 5.10.28-2.fc32.qubes.x86_64 (mockbuild@work-qubesos) (gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), GNU ld version 2.34-6.fc32) #1 SMP Tue Apr 13 00:02:05 CEST 2021
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.28-2.fc32.qubes.x86_64 placeholder root=/dev/mapper/qubes_dom0-root ro rd.luks.uuid=luks-da45b295-82dd-4e41-8203-d54b63bc70a5 rd.md.uuid=8784b982:f88ef5f7:78062a51:ce3439cb rd.lvm.lv=qubes_dom0/root rd.md.uuid=0d7098cb:6bc8dd79:c7fb483f:674f5a15 rd.lvm.lv=qubes_dom0/swap plymouth.ignore-serial-consoles i915.alpha_support=1 rd.driver.pre=btrfs rhgb quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a212fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a213000-0x00000000eb959fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000eb95a000-0x00000000ecf93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ecf94000-0x00000000ecfd1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ecfd2000-0x00000000ed659fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ed65a000-0x00000000ee1fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ee1ff000-0x00000000eeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ef000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000100f2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000100f300000-0x000000100fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X570D4U-2L2T, BIOS P1.30 12/04/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3799.702 MHz processor
[ 0.000620] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000622] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000628] last_pfn = 0x100f300 max_arch_pfn = 0x400000000
[ 0.000631] MTRR default type: uncachable
[ 0.000631] MTRR fixed ranges enabled:
[ 0.000632] 00000-9FFFF write-back
[ 0.000633] A0000-BFFFF write-through
[ 0.000633] C0000-FFFFF write-protect
[ 0.000634] MTRR variable ranges enabled:
[ 0.000634] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000635] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000636] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000636] 3 base 0000E0000000 mask FFFFF0000000 write-back
[ 0.000637] 4 base 0000ED8F0000 mask FFFFFFFF0000 uncachable
[ 0.000637] 5 disabled
[ 0.000638] 6 disabled
[ 0.000638] 7 disabled
[ 0.000638] TOM2: 0000001010000000 aka 65792M
[ 0.001223] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001330] e820: update [mem 0xed8f0000-0xed8fffff] usable ==> reserved
[ 0.001332] e820: update [mem 0xf0000000-0xffffffff] usable ==> reserved
[ 0.001336] last_pfn = 0xef000 max_arch_pfn = 0x400000000
[ 0.005094] ACPI: Early table checksum verification disabled
[ 0.005096] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.005099] ACPI: XSDT 0x00000000ED640728 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.005102] ACPI: FACP 0x00000000ECFC2000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.005106] ACPI: DSDT 0x00000000ECFBB000 00645B (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.005108] ACPI: FACS 0x00000000ED63B000 000040
[ 0.005110] ACPI: SSDT 0x00000000ECFC9000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.005112] ACPI: SPMI 0x00000000ECFC8000 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
[ 0.005114] ACPI: SSDT 0x00000000ECFC4000 003A7A (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.005116] ACPI: SSDT 0x00000000ECFC3000 000164 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.005118] ACPI: FIDT 0x00000000ECFBA000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005120] ACPI: MCFG 0x00000000ECFB9000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.005121] ACPI: AAFT 0x00000000ECFB8000 000068 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.005123] ACPI: HPET 0x00000000ECFB7000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.005125] ACPI: SSDT 0x00000000ECFB6000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.005127] ACPI: IVRS 0x00000000ECFB4000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.005129] ACPI: PCCT 0x00000000ECFB3000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.005131] ACPI: SSDT 0x00000000ECFAD000 005E09 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.005133] ACPI: CRAT 0x00000000ECFAB000 001658 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.005135] ACPI: CDIT 0x00000000ECFAA000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.005136] ACPI: SSDT 0x00000000ECFA9000 00052C (v01 AMD QOGIRNOI 00000001 INTL 20120913)
[ 0.005138] ACPI: SSDT 0x00000000ECFA5000 0034A4 (v01 AMD QOGIRN 00000001 INTL 20120913)
[ 0.005140] ACPI: WSMT 0x00000000ECFA4000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005142] ACPI: APIC 0x00000000ECFA3000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.005144] ACPI: SSDT 0x00000000ECFA1000 0010AF (v01 AMD QOGIRC 00000001 INTL 20120913)
[ 0.005146] ACPI: FPDT 0x00000000ECFA0000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.005148] ACPI: Reserving FACP table memory at [mem 0xecfc2000-0xecfc2113]
[ 0.005148] ACPI: Reserving DSDT table memory at [mem 0xecfbb000-0xecfc145a]
[ 0.005149] ACPI: Reserving FACS table memory at [mem 0xed63b000-0xed63b03f]
[ 0.005149] ACPI: Reserving SSDT table memory at [mem 0xecfc9000-0xecfd1c97]
[ 0.005150] ACPI: Reserving SPMI table memory at [mem 0xecfc8000-0xecfc8040]
[ 0.005150] ACPI: Reserving SSDT table memory at [mem 0xecfc4000-0xecfc7a79]
[ 0.005151] ACPI: Reserving SSDT table memory at [mem 0xecfc3000-0xecfc3163]
[ 0.005151] ACPI: Reserving FIDT table memory at [mem 0xecfba000-0xecfba09b]
[ 0.005152] ACPI: Reserving MCFG table memory at [mem 0xecfb9000-0xecfb903b]
[ 0.005152] ACPI: Reserving AAFT table memory at [mem 0xecfb8000-0xecfb8067]
[ 0.005153] ACPI: Reserving HPET table memory at [mem 0xecfb7000-0xecfb7037]
[ 0.005153] ACPI: Reserving SSDT table memory at [mem 0xecfb6000-0xecfb6023]
[ 0.005154] ACPI: Reserving IVRS table memory at [mem 0xecfb4000-0xecfb40cf]
[ 0.005154] ACPI: Reserving PCCT table memory at [mem 0xecfb3000-0xecfb306d]
[ 0.005155] ACPI: Reserving SSDT table memory at [mem 0xecfad000-0xecfb2e08]
[ 0.005155] ACPI: Reserving CRAT table memory at [mem 0xecfab000-0xecfac657]
[ 0.005156] ACPI: Reserving CDIT table memory at [mem 0xecfaa000-0xecfaa028]
[ 0.005156] ACPI: Reserving SSDT table memory at [mem 0xecfa9000-0xecfa952b]
[ 0.005157] ACPI: Reserving SSDT table memory at [mem 0xecfa5000-0xecfa84a3]
[ 0.005157] ACPI: Reserving WSMT table memory at [mem 0xecfa4000-0xecfa4027]
[ 0.005158] ACPI: Reserving APIC table memory at [mem 0xecfa3000-0xecfa315d]
[ 0.005158] ACPI: Reserving SSDT table memory at [mem 0xecfa1000-0xecfa20ae]
[ 0.005159] ACPI: Reserving FPDT table memory at [mem 0xecfa0000-0xecfa0043]
[ 0.005167] Using GB pages for direct mapping
[ 0.005777] RAMDISK: [mem 0x34883000-0x36438fff]
[ 0.005785] ACPI: Local APIC address 0xfee00000
[ 0.005827] No NUMA configuration found
[ 0.005828] Faking a node at [mem 0x0000000000000000-0x000000100f2fffff]
[ 0.005835] NODE_DATA(0) allocated [mem 0x100f2d5000-0x100f2fffff]
[ 0.082175] Zone ranges:
[ 0.082176] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.082178] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.082178] Normal [mem 0x0000000100000000-0x000000100f2fffff]
[ 0.082179] Device empty
[ 0.082180] Movable zone start for each node
[ 0.082181] Early memory node ranges
[ 0.082182] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.082183] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.082183] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.082184] node 0: [mem 0x000000000a213000-0x00000000eb959fff]
[ 0.082184] node 0: [mem 0x00000000ee1ff000-0x00000000eeffffff]
[ 0.082185] node 0: [mem 0x0000000100000000-0x000000100f2fffff]
[ 0.082190] Initmem setup node 0 [mem 0x0000000000001000-0x000000100f2fffff]
[ 0.082191] On node 0 totalpages: 16758242
[ 0.082192] DMA zone: 64 pages used for memmap
[ 0.082193] DMA zone: 21 pages reserved
[ 0.082193] DMA zone: 3995 pages, LIFO batch:0
[ 0.082434] DMA zone: 28773 pages in unavailable ranges
[ 0.082434] DMA32 zone: 15054 pages used for memmap
[ 0.082435] DMA32 zone: 963399 pages, LIFO batch:63
[ 0.088962] DMA32 zone: 15545 pages in unavailable ranges
[ 0.088964] Normal zone: 246732 pages used for memmap
[ 0.088965] Normal zone: 15790848 pages, LIFO batch:63
[ 0.192463] Normal zone: 3328 pages in unavailable ranges
[ 0.193895] ACPI: PM-Timer IO Port: 0x808
[ 0.193897] ACPI: Local APIC address 0xfee00000
[ 0.193904] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.193915] IOAPIC[0]: apic_id 25, version 33, address 0xfec00000, GSI 0-23
[ 0.193920] IOAPIC[1]: apic_id 26, version 33, address 0xfec01000, GSI 24-55
[ 0.193921] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.193923] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.193924] ACPI: IRQ0 used by override.
[ 0.193924] ACPI: IRQ9 used by override.
[ 0.193926] Using ACPI (MADT) for SMP configuration information
[ 0.193927] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.193931] smpboot: Allowing 32 CPUs, 8 hotplug CPUs
[ 0.193955] [mem 0xf8000000-0xfd1fffff] available for PCI devices
[ 0.193956] Booting paravirtualized kernel on bare hardware
[ 0.193958] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.197767] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.198549] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.198556] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.198557] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.198562] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.198595] Built 1 zonelists, mobility grouping on. Total pages: 16496371
[ 0.198595] Policy zone: Normal
[ 0.198597] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.28-2.fc32.qubes.x86_64 placeholder root=/dev/mapper/qubes_dom0-root ro rd.luks.uuid=luks-da45b295-82dd-4e41-8203-d54b63bc70a5 rd.md.uuid=8784b982:f88ef5f7:78062a51:ce3439cb rd.lvm.lv=qubes_dom0/root rd.md.uuid=0d7098cb:6bc8dd79:c7fb483f:674f5a15 rd.lvm.lv=qubes_dom0/swap plymouth.ignore-serial-consoles i915.alpha_support=1 rd.driver.pre=btrfs rhgb quiet
[ 0.203137] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[ 0.205270] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.205343] mem auto-init: stack:byref_all(zero), heap alloc:off, heap free:off
[ 0.294052] Memory: 65743252K/67032968K available (16393K kernel code, 3431K rwdata, 5360K rodata, 3000K init, 4728K bss, 1289456K reserved, 0K cma-reserved)
[ 0.294059] random: get_random_u64 called from kmem_cache_open+0x24/0x210 with crng_init=0
[ 0.294154] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.294165] ftrace: allocating 49214 entries in 193 pages
[ 0.305468] ftrace: allocated 193 pages with 3 groups
[ 0.305561] rcu: Hierarchical RCU implementation.
[ 0.305562] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[ 0.305562] Trampoline variant of Tasks RCU enabled.
[ 0.305563] Rude variant of Tasks RCU enabled.
[ 0.305563] Tracing variant of Tasks RCU enabled.
[ 0.305564] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.305564] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.307979] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[ 0.308255] random: crng done (trusting CPU's manufacturer)
[ 0.308277] spurious 8259A interrupt: IRQ7.
[ 0.315270] Console: colour VGA+ 80x25
[ 0.315278] printk: console [tty0] enabled
[ 0.315291] ACPI: Core revision 20200925
[ 0.315416] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.315430] APIC: Switch to symmetric I/O mode setup
[ 0.316514] Switched APIC routing to physical flat.
[ 0.317113] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.321432] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8a7b7214e, max_idle_ns: 881590582107 ns
[ 0.321434] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.40 BogoMIPS (lpj=3799702)
[ 0.321435] pid_max: default: 32768 minimum: 301
[ 0.321458] LSM: Security Framework initializing
[ 0.321461] Yama: becoming mindful.
[ 0.321545] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.321620] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.321787] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.321833] LVT offset 1 assigned for vector 0xf9
[ 0.321958] LVT offset 2 assigned for vector 0xf4
[ 0.321992] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.321993] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.321994] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.321996] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.321996] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.321998] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.321998] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.321999] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.322152] Freeing SMP alternatives memory: 44K
[ 0.425493] smpboot: CPU0: AMD Ryzen 9 3900XT 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.425593] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.425596] ... version: 0
[ 0.425597] ... bit width: 48
[ 0.425597] ... generic registers: 6
[ 0.425597] ... value mask: 0000ffffffffffff
[ 0.425598] ... max period: 00007fffffffffff
[ 0.425598] ... fixed-purpose events: 0
[ 0.425598] ... event mask: 000000000000003f
[ 0.425639] rcu: Hierarchical SRCU implementation.
[ 0.425866] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.426014] smp: Bringing up secondary CPUs ...
[ 0.426058] x86: Booting SMP configuration:
[ 0.426059] .... node #0, CPUs: #1
[ 0.008269] __common_interrupt: 1.55 No irq handler for vector
[ 0.427483] #2
[ 0.008269] __common_interrupt: 2.55 No irq handler for vector
[ 0.428478] #3
[ 0.008269] __common_interrupt: 3.55 No irq handler for vector
[ 0.430456] #4
[ 0.008269] __common_interrupt: 4.55 No irq handler for vector
[ 0.431477] #5
[ 0.008269] __common_interrupt: 5.55 No irq handler for vector
[ 0.432479] #6
[ 0.008269] __common_interrupt: 6.55 No irq handler for vector
[ 0.434456] #7
[ 0.008269] __common_interrupt: 7.55 No irq handler for vector
[ 0.435479] #8
[ 0.008269] __common_interrupt: 8.55 No irq handler for vector
[ 0.436481] #9
[ 0.008269] __common_interrupt: 9.55 No irq handler for vector
[ 0.438473] #10
[ 0.008269] __common_interrupt: 10.55 No irq handler for vector
[ 0.439479] #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
[ 0.455455] smp: Brought up 1 node, 24 CPUs
[ 0.455455] smpboot: Max logical packages: 2
[ 0.455456] smpboot: Total of 24 processors activated (182385.69 BogoMIPS)
[ 0.458867] devtmpfs: initialized
[ 0.458867] x86/mm: Memory block size: 2048MB
[ 0.458867] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a212fff] (77824 bytes)
[ 0.458867] PM: Registering ACPI NVS region [mem 0xecfd2000-0xed659fff] (6848512 bytes)
[ 0.458867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.458867] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.458867] pinctrl core: initialized pinctrl subsystem
[ 0.458867] PM: RTC time: 09:00:12, date: 2021-04-14
[ 0.458867] NET: Registered protocol family 16
[ 0.458931] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.458936] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.458940] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.458947] audit: initializing netlink subsys (disabled)
[ 0.459443] audit: type=2000 audit(1618390812.144:1): state=initialized audit_enabled=0 res=1
[ 0.459496] thermal_sys: Registered thermal governor 'fair_share'
[ 0.459497] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.459497] thermal_sys: Registered thermal governor 'step_wise'
[ 0.459498] thermal_sys: Registered thermal governor 'user_space'
[ 0.459508] cpuidle: using governor menu
[ 0.459508] Detected 1 PCC Subspaces
[ 0.459508] Registering PCC driver as Mailbox controller
[ 0.459529] ACPI: bus type PCI registered
[ 0.459603] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.459605] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.459616] PCI: Using configuration type 1 for base access
[ 0.460064] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.460064] mtrr: probably your BIOS does not setup all CPUs.
[ 0.460065] mtrr: corrected configuration.
[ 0.461475] Kprobes globally optimized
[ 0.461486] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.461486] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.535521] cryptd: max_cpu_qlen set to 1000
[ 0.537483] alg: No test for 842 (842-generic)
[ 0.537483] alg: No test for 842 (842-scomp)
[ 0.539485] raid6: skip pq benchmark and using algorithm avx2x4
[ 0.539487] raid6: using avx2x2 recovery algorithm
[ 0.539544] ACPI: Added _OSI(Module Device)
[ 0.539545] ACPI: Added _OSI(Processor Device)
[ 0.539545] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.539546] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.539547] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.539547] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.539548] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.545626] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.546474] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.549784] ACPI: Interpreter enabled
[ 0.549792] ACPI: (supports S0 S5)
[ 0.549793] ACPI: Using IOAPIC for interrupt routing
[ 0.549961] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.550172] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.555691] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.555695] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.555776] acpi PNP0A08:00: _OSC: platform does not support [LTR DPC]
[ 0.555855] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.555862] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.555974] PCI host bridge to bus 0000:00
[ 0.555975] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.555976] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.555977] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.555977] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.555978] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.555979] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.555979] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfcffffff window]
[ 0.555980] pci_bus 0000:00: root bus resource [mem 0x1010000000-0x7fffffffff window]
[ 0.555981] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.555991] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.556072] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[ 0.556156] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.556218] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[ 0.556243] pci 0000:00:01.1: enabling Extended Tags
[ 0.556290] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.556389] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[ 0.556413] pci 0000:00:01.2: enabling Extended Tags
[ 0.556460] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.556553] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.556615] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.556678] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.556746] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.556841] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.556906] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.556969] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.557028] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.557051] pci 0000:00:07.1: enabling Extended Tags
[ 0.557089] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.557173] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.557233] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.557257] pci 0000:00:08.1: enabling Extended Tags
[ 0.557300] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.557401] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.557507] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.557617] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.557652] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.557686] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.557719] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.557753] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.557787] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.557821] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.557856] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.558076] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
[ 0.558094] pci 0000:01:00.0: reg 0x10: [mem 0xfc500000-0xfc503fff 64bit]
[ 0.558287] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.558292] pci 0000:00:01.1: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.558343] pci 0000:20:00.0: [1022:57ad] type 01 class 0x060400
[ 0.558398] pci 0000:20:00.0: enabling Extended Tags
[ 0.558483] pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
[ 0.558582] pci 0000:20:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
[ 0.558629] pci 0000:00:01.2: PCI bridge to [bus 20-2c]
[ 0.558632] pci 0000:00:01.2: bridge window [io 0xc000-0xefff]
[ 0.558633] pci 0000:00:01.2: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.558636] pci 0000:00:01.2: bridge window [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.558763] pci 0000:21:01.0: [1022:57a3] type 01 class 0x060400
[ 0.558837] pci 0000:21:01.0: enabling Extended Tags
[ 0.559073] pci 0000:21:01.0: PME# supported from D0 D3hot D3cold
[ 0.559414] pci 0000:21:02.0: [1022:57a3] type 01 class 0x060400
[ 0.559484] pci 0000:21:02.0: enabling Extended Tags
[ 0.559720] pci 0000:21:02.0: PME# supported from D0 D3hot D3cold
[ 0.560099] pci 0000:21:04.0: [1022:57a3] type 01 class 0x060400
[ 0.560168] pci 0000:21:04.0: enabling Extended Tags
[ 0.560404] pci 0000:21:04.0: PME# supported from D0 D3hot D3cold
[ 0.560737] pci 0000:21:05.0: [1022:57a3] type 01 class 0x060400
[ 0.560827] pci 0000:21:05.0: enabling Extended Tags
[ 0.561064] pci 0000:21:05.0: PME# supported from D0 D3hot D3cold
[ 0.561500] pci 0000:21:06.0: [1022:57a3] type 01 class 0x060400
[ 0.561569] pci 0000:21:06.0: enabling Extended Tags
[ 0.561831] pci 0000:21:06.0: PME# supported from D0 D3hot D3cold
[ 0.562263] pci 0000:21:08.0: [1022:57a4] type 01 class 0x060400
[ 0.562332] pci 0000:21:08.0: enabling Extended Tags
[ 0.562497] pci 0000:21:08.0: PME# supported from D0 D3hot D3cold
[ 0.562691] pci 0000:21:09.0: [1022:57a4] type 01 class 0x060400
[ 0.562760] pci 0000:21:09.0: enabling Extended Tags
[ 0.562933] pci 0000:21:09.0: PME# supported from D0 D3hot D3cold
[ 0.563121] pci 0000:21:0a.0: [1022:57a4] type 01 class 0x060400
[ 0.563190] pci 0000:21:0a.0: enabling Extended Tags
[ 0.563349] pci 0000:21:0a.0: PME# supported from D0 D3hot D3cold
[ 0.563537] pci 0000:20:00.0: PCI bridge to [bus 21-2c]
[ 0.563543] pci 0000:20:00.0: bridge window [io 0xc000-0xefff]
[ 0.563546] pci 0000:20:00.0: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.563552] pci 0000:20:00.0: bridge window [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.563793] pci 0000:23:00.0: [144d:a808] type 00 class 0x010802
[ 0.563823] pci 0000:23:00.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
[ 0.564157] pci 0000:21:01.0: PCI bridge to [bus 23]
[ 0.564165] pci 0000:21:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.564282] pci 0000:24:00.0: [8086:1563] type 00 class 0x020000
[ 0.564313] pci 0000:24:00.0: reg 0x10: [mem 0x7fff800000-0x7fffbfffff 64bit pref]
[ 0.564358] pci 0000:24:00.0: reg 0x20: [mem 0x7fffc04000-0x7fffc07fff 64bit pref]
[ 0.564371] pci 0000:24:00.0: reg 0x30: [mem 0xfb280000-0xfb2fffff pref]
[ 0.564523] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[ 0.564585] pci 0000:24:00.0: reg 0x184: [mem 0xfb600000-0xfb603fff 64bit]
[ 0.564586] pci 0000:24:00.0: VF(n) BAR0 space: [mem 0xfb600000-0xfb6fffff 64bit] (contains BAR0 for 64 VFs)
[ 0.564618] pci 0000:24:00.0: reg 0x190: [mem 0xfb500000-0xfb503fff 64bit]
[ 0.564618] pci 0000:24:00.0: VF(n) BAR3 space: [mem 0xfb500000-0xfb5fffff 64bit] (contains BAR3 for 64 VFs)
[ 0.565111] pci 0000:24:00.1: [8086:1563] type 00 class 0x020000
[ 0.565142] pci 0000:24:00.1: reg 0x10: [mem 0x7fff400000-0x7fff7fffff 64bit pref]
[ 0.565187] pci 0000:24:00.1: reg 0x20: [mem 0x7fffc00000-0x7fffc03fff 64bit pref]
[ 0.565200] pci 0000:24:00.1: reg 0x30: [mem 0xfb200000-0xfb27ffff pref]
[ 0.565332] pci 0000:24:00.1: PME# supported from D0 D3hot D3cold
[ 0.565382] pci 0000:24:00.1: reg 0x184: [mem 0xfb400000-0xfb403fff 64bit]
[ 0.565383] pci 0000:24:00.1: VF(n) BAR0 space: [mem 0xfb400000-0xfb4fffff 64bit] (contains BAR0 for 64 VFs)
[ 0.565414] pci 0000:24:00.1: reg 0x190: [mem 0xfb300000-0xfb303fff 64bit]
[ 0.565415] pci 0000:24:00.1: VF(n) BAR3 space: [mem 0xfb300000-0xfb3fffff 64bit] (contains BAR3 for 64 VFs)
[ 0.565882] pci 0000:21:02.0: PCI bridge to [bus 24-25]
[ 0.565891] pci 0000:21:02.0: bridge window [mem 0xfb200000-0xfb6fffff]
[ 0.565896] pci 0000:21:02.0: bridge window [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.566115] pci 0000:26:00.0: [8086:1533] type 00 class 0x020000
[ 0.566145] pci 0000:26:00.0: reg 0x10: [mem 0xfbc00000-0xfbc7ffff]
[ 0.566178] pci 0000:26:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 0.566194] pci 0000:26:00.0: reg 0x1c: [mem 0xfbc80000-0xfbc83fff]
[ 0.566376] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
[ 0.567692] pci 0000:21:04.0: PCI bridge to [bus 26]
[ 0.567698] pci 0000:21:04.0: bridge window [io 0xe000-0xefff]
[ 0.567701] pci 0000:21:04.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.567923] pci 0000:27:00.0: [8086:1533] type 00 class 0x020000
[ 0.567953] pci 0000:27:00.0: reg 0x10: [mem 0xfbb00000-0xfbb7ffff]
[ 0.567985] pci 0000:27:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.568002] pci 0000:27:00.0: reg 0x1c: [mem 0xfbb80000-0xfbb83fff]
[ 0.568182] pci 0000:27:00.0: PME# supported from D0 D3hot D3cold
[ 0.568692] pci 0000:21:05.0: PCI bridge to [bus 27]
[ 0.568698] pci 0000:21:05.0: bridge window [io 0xd000-0xdfff]
[ 0.568701] pci 0000:21:05.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.568830] pci 0000:28:00.0: [1a03:1150] type 01 class 0x060400
[ 0.568907] pci 0000:28:00.0: enabling Extended Tags
[ 0.568997] pci 0000:28:00.0: supports D1 D2
[ 0.568997] pci 0000:28:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569115] pci 0000:21:06.0: PCI bridge to [bus 28-29]
[ 0.569121] pci 0000:21:06.0: bridge window [io 0xc000-0xcfff]
[ 0.569124] pci 0000:21:06.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.569178] pci_bus 0000:29: extended config space not accessible
[ 0.569198] pci 0000:29:00.0: [1a03:2000] type 00 class 0x030000
[ 0.569225] pci 0000:29:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.569239] pci 0000:29:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
[ 0.569254] pci 0000:29:00.0: reg 0x18: [io 0xc000-0xc07f]
[ 0.569365] pci 0000:29:00.0: supports D1 D2
[ 0.569365] pci 0000:29:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569365] pci 0000:28:00.0: PCI bridge to [bus 29]
[ 0.569365] pci 0000:28:00.0: bridge window [io 0xc000-0xcfff]
[ 0.569365] pci 0000:28:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.569365] pci 0000:2a:00.0: [1022:1485] type 00 class 0x130000
[ 0.569365] pci 0000:2a:00.0: enabling Extended Tags
[ 0.569365] pci 0000:2a:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.569365] pci 0000:2a:00.1: [1022:149c] type 00 class 0x0c0330
[ 0.569495] pci 0000:2a:00.1: reg 0x10: [mem 0xfb800000-0xfb8fffff 64bit]
[ 0.570252] pci 0000:2a:00.1: enabling Extended Tags
[ 0.570769] pci 0000:2a:00.1: PME# supported from D0 D3hot D3cold
[ 0.571100] pci 0000:2a:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.571125] pci 0000:2a:00.3: reg 0x10: [mem 0xfb700000-0xfb7fffff 64bit]
[ 0.571183] pci 0000:2a:00.3: enabling Extended Tags
[ 0.571258] pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold
[ 0.571377] pci 0000:21:08.0: PCI bridge to [bus 2a]
[ 0.571385] pci 0000:21:08.0: bridge window [mem 0xfb700000-0xfb8fffff]
[ 0.571491] pci 0000:2b:00.0: [1022:7901] type 00 class 0x010601
[ 0.571560] pci 0000:2b:00.0: reg 0x24: [mem 0xfba00000-0xfba007ff]
[ 0.571579] pci 0000:2b:00.0: enabling Extended Tags
[ 0.571677] pci 0000:2b:00.0: PME# supported from D3hot D3cold
[ 0.571757] pci 0000:2b:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.571803] pci 0000:21:09.0: PCI bridge to [bus 2b]
[ 0.571811] pci 0000:21:09.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.571915] pci 0000:2c:00.0: [1022:7901] type 00 class 0x010601
[ 0.571984] pci 0000:2c:00.0: reg 0x24: [mem 0xfb900000-0xfb9007ff]
[ 0.572003] pci 0000:2c:00.0: enabling Extended Tags
[ 0.572100] pci 0000:2c:00.0: PME# supported from D3hot D3cold
[ 0.572180] pci 0000:2c:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.572226] pci 0000:21:0a.0: PCI bridge to [bus 2c]
[ 0.572234] pci 0000:21:0a.0: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.572325] pci 0000:2d:00.0: [1000:005f] type 00 class 0x010400
[ 0.572335] pci 0000:2d:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.572344] pci 0000:2d:00.0: reg 0x14: [mem 0xfc400000-0xfc40ffff 64bit]
[ 0.572353] pci 0000:2d:00.0: reg 0x1c: [mem 0xfc300000-0xfc3fffff 64bit]
[ 0.572364] pci 0000:2d:00.0: reg 0x30: [mem 0xfc200000-0xfc2fffff pref]
[ 0.572472] pci 0000:2d:00.0: supports D1 D2
[ 0.572535] pci 0000:00:03.1: PCI bridge to [bus 2d]
[ 0.572538] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.572539] pci 0000:00:03.1: bridge window [mem 0xfc200000-0xfc4fffff]
[ 0.572576] pci 0000:2e:00.0: [1022:148a] type 00 class 0x130000
[ 0.572610] pci 0000:2e:00.0: enabling Extended Tags
[ 0.572708] pci 0000:00:07.1: PCI bridge to [bus 2e]
[ 0.572752] pci 0000:2f:00.0: [1022:1485] type 00 class 0x130000
[ 0.572794] pci 0000:2f:00.0: enabling Extended Tags
[ 0.572903] pci 0000:2f:00.1: [1022:1486] type 00 class 0x108000
[ 0.572922] pci 0000:2f:00.1: reg 0x18: [mem 0xfc000000-0xfc0fffff]
[ 0.572937] pci 0000:2f:00.1: reg 0x24: [mem 0xfc108000-0xfc109fff]
[ 0.572946] pci 0000:2f:00.1: enabling Extended Tags
[ 0.573043] pci 0000:2f:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.573055] pci 0000:2f:00.3: reg 0x10: [mem 0xfbf00000-0xfbffffff 64bit]
[ 0.573084] pci 0000:2f:00.3: enabling Extended Tags
[ 0.573129] pci 0000:2f:00.3: PME# supported from D0 D3hot D3cold
[ 0.573195] pci 0000:2f:00.4: [1022:1487] type 00 class 0x040300
[ 0.573204] pci 0000:2f:00.4: reg 0x10: [mem 0xfc100000-0xfc107fff]
[ 0.573238] pci 0000:2f:00.4: enabling Extended Tags
[ 0.573281] pci 0000:2f:00.4: PME# supported from D0 D3hot D3cold
[ 0.573351] pci 0000:00:08.1: PCI bridge to [bus 2f]
[ 0.573355] pci 0000:00:08.1: bridge window [mem 0xfbf00000-0xfc1fffff]
[ 0.573703] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573733] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573758] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573789] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573818] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573841] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573865] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.573888] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.574445] iommu: Default domain type: Translated
[ 0.574448] pci 0000:29:00.0: vgaarb: setting as boot VGA device
[ 0.574448] pci 0000:29:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.574448] pci 0000:29:00.0: vgaarb: bridge control possible
[ 0.574448] vgaarb: loaded
[ 0.574509] SCSI subsystem initialized
[ 0.574514] libata version 3.00 loaded.
[ 0.574514] ACPI: bus type USB registered
[ 0.574514] usbcore: registered new interface driver usbfs
[ 0.574514] usbcore: registered new interface driver hub
[ 0.574514] usbcore: registered new device driver usb
[ 0.574514] pps_core: LinuxPPS API ver. 1 registered
[ 0.574514] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.574514] PTP clock support registered
[ 0.574514] EDAC MC: Ver: 3.0.0
[ 0.575528] NetLabel: Initializing
[ 0.575529] NetLabel: domain hash size = 128
[ 0.575529] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.575538] NetLabel: unlabeled traffic allowed by default
[ 0.575540] PCI: Using ACPI for IRQ routing
[ 0.578903] PCI: pci_cache_line_size set to 64 bytes
[ 0.579995] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.579997] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.579998] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
[ 0.579999] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.579999] e820: reserve RAM buffer [mem 0xeb95a000-0xebffffff]
[ 0.580000] e820: reserve RAM buffer [mem 0xef000000-0xefffffff]
[ 0.580000] e820: reserve RAM buffer [mem 0x100f300000-0x100fffffff]
[ 0.580498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.580500] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.582477] clocksource: Switched to clocksource tsc-early
[ 0.592274] VFS: Disk quotas dquot_6.6.0
[ 0.592285] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.592320] pnp: PnP ACPI init
[ 0.592373] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.592376] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.592419] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.592421] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.592441] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.592562] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.592563] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.592564] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.592564] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 0.592565] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.592566] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.592695] pnp 00:04: [dma 0 disabled]
[ 0.592712] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.592832] pnp 00:05: [dma 0 disabled]
[ 0.592848] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.592972] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.592973] system 00:06: [io 0x040b] has been reserved
[ 0.592974] system 00:06: [io 0x04d6] has been reserved
[ 0.592974] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.592975] system 00:06: [io 0x0c14] has been reserved
[ 0.592976] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.592976] system 00:06: [io 0x0c52] has been reserved
[ 0.592977] system 00:06: [io 0x0c6c] has been reserved
[ 0.592978] system 00:06: [io 0x0c6f] has been reserved
[ 0.592978] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.592979] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.592980] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.592980] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.592981] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.592982] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.592982] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.592983] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.592984] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.592984] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.592985] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.592986] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.592987] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.592988] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.592988] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.592989] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.592990] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.592992] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.593237] pnp: PnP ACPI: found 7 devices
[ 0.598407] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.598443] NET: Registered protocol family 2
[ 0.598601] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.598644] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.599075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.599161] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.599332] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[ 0.599403] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.599491] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.599622] NET: Registered protocol family 1
[ 0.599625] NET: Registered protocol family 44
[ 0.599636] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.599639] pci 0000:00:01.1: bridge window [mem 0xfc500000-0xfc5fffff]
[ 0.599645] pci 0000:21:01.0: PCI bridge to [bus 23]
[ 0.599649] pci 0000:21:01.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.599658] pci 0000:21:02.0: PCI bridge to [bus 24-25]
[ 0.599663] pci 0000:21:02.0: bridge window [mem 0xfb200000-0xfb6fffff]
[ 0.599666] pci 0000:21:02.0: bridge window [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.599672] pci 0000:21:04.0: PCI bridge to [bus 26]
[ 0.599675] pci 0000:21:04.0: bridge window [io 0xe000-0xefff]
[ 0.599679] pci 0000:21:04.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.599688] pci 0000:21:05.0: PCI bridge to [bus 27]
[ 0.599690] pci 0000:21:05.0: bridge window [io 0xd000-0xdfff]
[ 0.599694] pci 0000:21:05.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.599703] pci 0000:28:00.0: PCI bridge to [bus 29]
[ 0.599705] pci 0000:28:00.0: bridge window [io 0xc000-0xcfff]
[ 0.599711] pci 0000:28:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.599722] pci 0000:21:06.0: PCI bridge to [bus 28-29]
[ 0.599724] pci 0000:21:06.0: bridge window [io 0xc000-0xcfff]
[ 0.599729] pci 0000:21:06.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.599737] pci 0000:21:08.0: PCI bridge to [bus 2a]
[ 0.599742] pci 0000:21:08.0: bridge window [mem 0xfb700000-0xfb8fffff]
[ 0.599751] pci 0000:21:09.0: PCI bridge to [bus 2b]
[ 0.599755] pci 0000:21:09.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.599764] pci 0000:21:0a.0: PCI bridge to [bus 2c]
[ 0.599768] pci 0000:21:0a.0: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.599777] pci 0000:20:00.0: PCI bridge to [bus 21-2c]
[ 0.599779] pci 0000:20:00.0: bridge window [io 0xc000-0xefff]
[ 0.599783] pci 0000:20:00.0: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.599787] pci 0000:20:00.0: bridge window [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.599793] pci 0000:00:01.2: PCI bridge to [bus 20-2c]
[ 0.599794] pci 0000:00:01.2: bridge window [io 0xc000-0xefff]
[ 0.599796] pci 0000:00:01.2: bridge window [mem 0xfa000000-0xfbdfffff]
[ 0.599799] pci 0000:00:01.2: bridge window [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.599802] pci 0000:00:03.1: PCI bridge to [bus 2d]
[ 0.599803] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.599805] pci 0000:00:03.1: bridge window [mem 0xfc200000-0xfc4fffff]
[ 0.599809] pci 0000:00:07.1: PCI bridge to [bus 2e]
[ 0.599815] pci 0000:00:08.1: PCI bridge to [bus 2f]
[ 0.599818] pci 0000:00:08.1: bridge window [mem 0xfbf00000-0xfc1fffff]
[ 0.599822] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.599823] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.599823] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.599824] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.599825] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.599825] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.599826] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfcffffff window]
[ 0.599827] pci_bus 0000:00: resource 11 [mem 0x1010000000-0x7fffffffff window]
[ 0.599828] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc5fffff]
[ 0.599828] pci_bus 0000:20: resource 0 [io 0xc000-0xefff]
[ 0.599829] pci_bus 0000:20: resource 1 [mem 0xfa000000-0xfbdfffff]
[ 0.599829] pci_bus 0000:20: resource 2 [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.599830] pci_bus 0000:21: resource 0 [io 0xc000-0xefff]
[ 0.599831] pci_bus 0000:21: resource 1 [mem 0xfa000000-0xfbdfffff]
[ 0.599831] pci_bus 0000:21: resource 2 [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.599832] pci_bus 0000:23: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.599833] pci_bus 0000:24: resource 1 [mem 0xfb200000-0xfb6fffff]
[ 0.599833] pci_bus 0000:24: resource 2 [mem 0x7fff400000-0x7fffcfffff 64bit pref]
[ 0.599834] pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
[ 0.599834] pci_bus 0000:26: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.599835] pci_bus 0000:27: resource 0 [io 0xd000-0xdfff]
[ 0.599836] pci_bus 0000:27: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.599836] pci_bus 0000:28: resource 0 [io 0xc000-0xcfff]
[ 0.599837] pci_bus 0000:28: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.599838] pci_bus 0000:29: resource 0 [io 0xc000-0xcfff]
[ 0.599838] pci_bus 0000:29: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.599839] pci_bus 0000:2a: resource 1 [mem 0xfb700000-0xfb8fffff]
[ 0.599840] pci_bus 0000:2b: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.599840] pci_bus 0000:2c: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.599841] pci_bus 0000:2d: resource 0 [io 0xf000-0xffff]
[ 0.599841] pci_bus 0000:2d: resource 1 [mem 0xfc200000-0xfc4fffff]
[ 0.599842] pci_bus 0000:2f: resource 1 [mem 0xfbf00000-0xfc1fffff]
[ 0.600425] pci 0000:29:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.600695] pci 0000:2d:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.600767] PCI: CLS 64 bytes, default 64
[ 0.600794] Trying to unpack rootfs image as initramfs...
[ 0.871569] Freeing initrd memory: 28376K
[ 0.871598] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.871647] pci 0000:00:01.0: Adding to iommu group 0
[ 0.871655] pci 0000:00:01.1: Adding to iommu group 1
[ 0.871662] pci 0000:00:01.2: Adding to iommu group 2
[ 0.871671] pci 0000:00:02.0: Adding to iommu group 3
[ 0.871682] pci 0000:00:03.0: Adding to iommu group 4
[ 0.871689] pci 0000:00:03.1: Adding to iommu group 5
[ 0.871697] pci 0000:00:04.0: Adding to iommu group 6
[ 0.871706] pci 0000:00:05.0: Adding to iommu group 7
[ 0.871717] pci 0000:00:07.0: Adding to iommu group 8
[ 0.871723] pci 0000:00:07.1: Adding to iommu group 9
[ 0.871733] pci 0000:00:08.0: Adding to iommu group 10
[ 0.871740] pci 0000:00:08.1: Adding to iommu group 11
[ 0.871753] pci 0000:00:14.0: Adding to iommu group 12
[ 0.871759] pci 0000:00:14.3: Adding to iommu group 12
[ 0.871788] pci 0000:00:18.0: Adding to iommu group 13
[ 0.871794] pci 0000:00:18.1: Adding to iommu group 13
[ 0.871800] pci 0000:00:18.2: Adding to iommu group 13
[ 0.871809] pci 0000:00:18.3: Adding to iommu group 13
[ 0.871816] pci 0000:00:18.4: Adding to iommu group 13
[ 0.871822] pci 0000:00:18.5: Adding to iommu group 13
[ 0.871828] pci 0000:00:18.6: Adding to iommu group 13
[ 0.871834] pci 0000:00:18.7: Adding to iommu group 13
[ 0.871842] pci 0000:01:00.0: Adding to iommu group 14
[ 0.871850] pci 0000:20:00.0: Adding to iommu group 15
[ 0.871881] pci 0000:21:01.0: Adding to iommu group 16
[ 0.871911] pci 0000:21:02.0: Adding to iommu group 17
[ 0.871940] pci 0000:21:04.0: Adding to iommu group 18
[ 0.871970] pci 0000:21:05.0: Adding to iommu group 19
[ 0.872000] pci 0000:21:06.0: Adding to iommu group 20
[ 0.872011] pci 0000:21:08.0: Adding to iommu group 21
[ 0.872021] pci 0000:21:09.0: Adding to iommu group 22
[ 0.872031] pci 0000:21:0a.0: Adding to iommu group 23
[ 0.872062] pci 0000:23:00.0: Adding to iommu group 24
[ 0.872097] pci 0000:24:00.0: Adding to iommu group 25
[ 0.872156] pci 0000:24:00.1: Adding to iommu group 26
[ 0.872187] pci 0000:26:00.0: Adding to iommu group 27
[ 0.872218] pci 0000:27:00.0: Adding to iommu group 28
[ 0.872248] pci 0000:28:00.0: Adding to iommu group 29
[ 0.872251] pci 0000:29:00.0: Adding to iommu group 29
[ 0.872253] pci 0000:2a:00.0: Adding to iommu group 21
[ 0.872256] pci 0000:2a:00.1: Adding to iommu group 21
[ 0.872259] pci 0000:2a:00.3: Adding to iommu group 21
[ 0.872263] pci 0000:2b:00.0: Adding to iommu group 22
[ 0.872266] pci 0000:2c:00.0: Adding to iommu group 23
[ 0.872274] pci 0000:2d:00.0: Adding to iommu group 30
[ 0.872281] pci 0000:2e:00.0: Adding to iommu group 31
[ 0.872289] pci 0000:2f:00.0: Adding to iommu group 32
[ 0.872298] pci 0000:2f:00.1: Adding to iommu group 33
[ 0.872307] pci 0000:2f:00.3: Adding to iommu group 34
[ 0.872315] pci 0000:2f:00.4: Adding to iommu group 35
[ 0.876797] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.876799] pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
[ 0.876800] PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.876803] AMD-Vi: Interrupt remapping enabled
[ 0.876803] AMD-Vi: Virtual APIC enabled
[ 0.876803] AMD-Vi: X2APIC enabled
[ 0.876880] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.877621] amd_uncore: 4 amd_df counters detected
[ 0.877625] amd_uncore: 6 amd_l3 counters detected
[ 0.877882] LVT offset 0 assigned for vector 0x400
[ 0.878004] perf: AMD IBS detected (0x000003ff)
[ 0.878008] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.879379] Initialise system trusted keyrings
[ 0.879388] Key type blacklist registered
[ 0.879414] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[ 0.880074] zbud: loaded
[ 0.880288] integrity: Platform Keyring initialized
[ 0.882699] NET: Registered protocol family 38
[ 0.882701] xor: automatically using best checksumming function avx
[ 0.882701] Key type asymmetric registered
[ 0.882702] Asymmetric key parser 'x509' registered
[ 0.882706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.882733] io scheduler mq-deadline registered
[ 0.882734] io scheduler kyber registered
[ 0.882746] io scheduler bfq registered
[ 0.882898] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.882982] pcieport 0000:00:01.1: PME: Signaling with IRQ 27
[ 0.883022] pcieport 0000:00:01.1: AER: enabled with IRQ 27
[ 0.883110] pcieport 0000:00:01.2: PME: Signaling with IRQ 28
[ 0.883166] pcieport 0000:00:01.2: AER: enabled with IRQ 28
[ 0.883254] pcieport 0000:00:03.1: PME: Signaling with IRQ 29
[ 0.883288] pcieport 0000:00:03.1: AER: enabled with IRQ 29
[ 0.883429] pcieport 0000:00:07.1: PME: Signaling with IRQ 31
[ 0.883462] pcieport 0000:00:07.1: AER: enabled with IRQ 31
[ 0.883539] pcieport 0000:00:08.1: PME: Signaling with IRQ 32
[ 0.883577] pcieport 0000:00:08.1: AER: enabled with IRQ 32
[ 0.885533] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.885547] ACPI: Power Button [PWRB]
[ 0.885565] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.885586] ACPI: Power Button [PWRF]
[ 0.885628] Monitor-Mwait will be used to enter C-1 state
[ 0.885634] ACPI: \_PR_.C000: Found 2 idle states
[ 0.885700] ACPI: \_PR_.C002: Found 2 idle states
[ 0.885755] ACPI: \_PR_.C004: Found 2 idle states
[ 0.885842] ACPI: \_PR_.C006: Found 2 idle states
[ 0.885919] ACPI: \_PR_.C008: Found 2 idle states
[ 0.885977] ACPI: \_PR_.C00A: Found 2 idle states
[ 0.886064] ACPI: \_PR_.C00C: Found 2 idle states
[ 0.886143] ACPI: \_PR_.C00E: Found 2 idle states
[ 0.886219] ACPI: \_PR_.C010: Found 2 idle states
[ 0.886273] ACPI: \_PR_.C012: Found 2 idle states
[ 0.886363] ACPI: \_PR_.C014: Found 2 idle states
[ 0.886435] ACPI: \_PR_.C016: Found 2 idle states
[ 0.886511] ACPI: \_PR_.C001: Found 2 idle states
[ 0.886584] ACPI: \_PR_.C003: Found 2 idle states
[ 0.886659] ACPI: \_PR_.C005: Found 2 idle states
[ 0.886739] ACPI: \_PR_.C007: Found 2 idle states
[ 0.886811] ACPI: \_PR_.C009: Found 2 idle states
[ 0.886883] ACPI: \_PR_.C00B: Found 2 idle states
[ 0.886937] ACPI: \_PR_.C00D: Found 2 idle states
[ 0.887019] ACPI: \_PR_.C00F: Found 2 idle states
[ 0.887093] ACPI: \_PR_.C011: Found 2 idle states
[ 0.887178] ACPI: \_PR_.C013: Found 2 idle states
[ 0.887230] ACPI: \_PR_.C015: Found 2 idle states
[ 0.887275] ACPI: \_PR_.C017: Found 2 idle states
[ 0.887426] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.887484] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.888022] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.889218] Non-volatile memory driver v1.3
[ 0.889233] Linux agpgart interface v0.103
[ 0.890804] ahci 0000:2b:00.0: version 3.0
[ 0.891083] ahci 0000:2b:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 0.891085] ahci 0000:2b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.891347] scsi host0: ahci
[ 0.891423] scsi host1: ahci
[ 0.891481] scsi host2: ahci
[ 0.891538] scsi host3: ahci
[ 0.891559] ata1: SATA max UDMA/133 abar m2048@0xfba00000 port 0xfba00100 irq 43
[ 0.891561] ata2: SATA max UDMA/133 abar m2048@0xfba00000 port 0xfba00180 irq 44
[ 0.891563] ata3: SATA max UDMA/133 abar m2048@0xfba00000 port 0xfba00200 irq 45
[ 0.891565] ata4: SATA max UDMA/133 abar m2048@0xfba00000 port 0xfba00280 irq 46
[ 0.891860] ahci 0000:2c:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
[ 0.891861] ahci 0000:2c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.892154] scsi host4: ahci
[ 0.892205] scsi host5: ahci
[ 0.892254] scsi host6: ahci
[ 0.892305] scsi host7: ahci
[ 0.892353] scsi host8: ahci
[ 0.892403] scsi host9: ahci
[ 0.892423] ata5: SATA max UDMA/133 abar m2048@0xfb900000 port 0xfb900100 irq 59
[ 0.892426] ata6: SATA max UDMA/133 abar m2048@0xfb900000 port 0xfb900180 irq 60
[ 0.892426] ata7: DUMMY
[ 0.892426] ata8: DUMMY
[ 0.892429] ata9: SATA max UDMA/133 abar m2048@0xfb900000 port 0xfb900300 irq 63
[ 0.892431] ata10: SATA max UDMA/133 abar m2048@0xfb900000 port 0xfb900380 irq 64
[ 0.892511] libphy: Fixed MDIO Bus: probed
[ 0.892567] usbcore: registered new interface driver usbserial_generic
[ 0.892569] usbserial: USB Serial support registered for generic
[ 0.892578] i8042: PNP: No PS/2 controller found.
[ 0.892593] mousedev: PS/2 mouse device common for all mice
[ 0.892646] rtc_cmos 00:02: RTC can wake from S4
[ 0.892786] rtc_cmos 00:02: registered as rtc0
[ 0.892839] rtc_cmos 00:02: setting system clock to 2021-04-14T09:00:12 UTC (1618390812)
[ 0.892846] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.892865] device-mapper: uevent: version 1.0.3
[ 0.892892] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 0.892976] hid: raw HID events driver (C) Jiri Kosina
[ 0.892991] usbcore: registered new interface driver usbhid
[ 0.892991] usbhid: USB HID core driver
[ 0.893031] drop_monitor: Initializing network drop monitor service
[ 0.893074] Initializing XFRM netlink socket
[ 0.893130] NET: Registered protocol family 10
[ 0.894644] Segment Routing with IPv6
[ 0.894644] RPL Segment Routing with IPv6
[ 0.894654] mip6: Mobile IPv6
[ 0.894655] NET: Registered protocol family 17
[ 0.895531] microcode: CPU0: patch_level=0x08701021
[ 0.895536] microcode: CPU1: patch_level=0x08701021
[ 0.895542] microcode: CPU2: patch_level=0x08701021
[ 0.895548] microcode: CPU3: patch_level=0x08701021
[ 0.895554] microcode: CPU4: patch_level=0x08701021
[ 0.895560] microcode: CPU5: patch_level=0x08701021
[ 0.895563] microcode: CPU6: patch_level=0x08701021
[ 0.895569] microcode: CPU7: patch_level=0x08701021
[ 0.895574] microcode: CPU8: patch_level=0x08701021
[ 0.895581] microcode: CPU9: patch_level=0x08701021
[ 0.895586] microcode: CPU10: patch_level=0x08701021
[ 0.895591] microcode: CPU11: patch_level=0x08701021
[ 0.895597] microcode: CPU12: patch_level=0x08701021
[ 0.895602] microcode: CPU13: patch_level=0x08701021
[ 0.895607] microcode: CPU14: patch_level=0x08701021
[ 0.895612] microcode: CPU15: patch_level=0x08701021
[ 0.895617] microcode: CPU16: patch_level=0x08701021
[ 0.895622] microcode: CPU17: patch_level=0x08701021
[ 0.895627] microcode: CPU18: patch_level=0x08701021
[ 0.895632] microcode: CPU19: patch_level=0x08701021
[ 0.895636] microcode: CPU20: patch_level=0x08701021
[ 0.895641] microcode: CPU21: patch_level=0x08701021
[ 0.895643] microcode: CPU22: patch_level=0x08701021
[ 0.895647] microcode: CPU23: patch_level=0x08701021
[ 0.895649] microcode: Microcode Update Driver: v2.2.
[ 0.895852] resctrl: L3 allocation detected
[ 0.895852] resctrl: L3DATA allocation detected
[ 0.895853] resctrl: L3CODE allocation detected
[ 0.895853] resctrl: MB allocation detected
[ 0.895853] resctrl: L3 monitoring detected
[ 0.895855] IPI shorthand broadcast: enabled
[ 0.895859] AVX2 version of gcm_enc/dec engaged.
[ 0.895859] AES CTR mode by8 optimization enabled
[ 0.903035] sched_clock: Marking stable (895760132, 7269720)->(1059742456, -156712604)
[ 0.903162] registered taskstats version 1
[ 0.903173] Loading compiled-in X.509 certificates
[ 0.903571] Loaded X.509 cert 'Build time autogenerated kernel key: f266bdb82dffdd59a898acc7eaad42bca7acfd79'
[ 0.903590] zswap: loaded using pool lzo/zbud
[ 0.903733] Key type ._fscrypt registered
[ 0.903734] Key type .fscrypt registered
[ 0.903734] Key type fscrypt-provisioning registered
[ 0.903838] Btrfs loaded, crc32c=crc32c-generic
[ 0.904900] Key type encrypted registered
[ 0.904904] ima: No TPM chip found, activating TPM-bypass!
[ 0.904908] ima: Allocated hash algorithm: sha256
[ 0.904915] ima: No architecture policies found
[ 0.904920] evm: Initialising EVM extended attributes:
[ 0.904920] evm: security.selinux
[ 0.904920] evm: security.apparmor
[ 0.904921] evm: security.ima
[ 0.904921] evm: security.capability
[ 0.904921] evm: HMAC attrs: 0x1
[ 0.905119] PM: Magic number: 1:952:19
[ 0.905198] RAS: Correctable Errors collector initialized.
[ 1.362455] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.362458] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.362482] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.362487] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.362507] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.362532] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.363454] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.363478] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.363512] ata2.00: NCQ Send/Recv Log not supported
[ 1.363513] ata2.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.363514] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.363530] ata4.00: NCQ Send/Recv Log not supported
[ 1.363532] ata4.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.363533] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.363541] ata10.00: NCQ Send/Recv Log not supported
[ 1.363542] ata10.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.363543] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.363553] ata5.00: NCQ Send/Recv Log not supported
[ 1.363554] ata5.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.363555] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.363559] ata3.00: NCQ Send/Recv Log not supported
[ 1.363560] ata3.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.363561] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.363590] ata1.00: NCQ Send/Recv Log not supported
[ 1.363591] ata1.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.363592] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.364510] ata6.00: NCQ Send/Recv Log not supported
[ 1.364511] ata6.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.364512] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.364536] ata9.00: NCQ Send/Recv Log not supported
[ 1.364537] ata9.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
[ 1.364537] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.364864] ata2.00: NCQ Send/Recv Log not supported
[ 1.364865] ata2.00: configured for UDMA/133
[ 1.364875] ata4.00: NCQ Send/Recv Log not supported
[ 1.364877] ata4.00: configured for UDMA/133
[ 1.364881] ata10.00: NCQ Send/Recv Log not supported
[ 1.364883] ata10.00: configured for UDMA/133
[ 1.364911] ata3.00: NCQ Send/Recv Log not supported
[ 1.364912] ata3.00: configured for UDMA/133
[ 1.364916] ata5.00: NCQ Send/Recv Log not supported
[ 1.364917] ata5.00: configured for UDMA/133
[ 1.364923] ata1.00: NCQ Send/Recv Log not supported
[ 1.364924] ata1.00: configured for UDMA/133
[ 1.364999] scsi 0:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.365075] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.365084] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.365085] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.365089] sd 0:0:0:0: [sda] Write Protect is off
[ 1.365089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.365096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365136] scsi 1:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.365193] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.365203] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.365203] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.365207] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.365208] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.365215] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365264] scsi 2:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.365319] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.365335] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.365336] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.365340] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.365341] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.365350] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365408] scsi 3:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.365473] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.365480] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.365481] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 1.365484] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.365484] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.365490] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365538] scsi 4:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.365593] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.365602] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.365602] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 1.365605] sd 4:0:0:0: [sde] Write Protect is off
[ 1.365606] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.365610] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365854] ata6.00: NCQ Send/Recv Log not supported
[ 1.365856] ata6.00: configured for UDMA/133
[ 1.365893] ata9.00: NCQ Send/Recv Log not supported
[ 1.365895] ata9.00: configured for UDMA/133
[ 1.365929] scsi 5:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.366004] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.366012] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.366013] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[ 1.366017] sd 5:0:0:0: [sdf] Write Protect is off
[ 1.366018] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.366023] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.366080] scsi 8:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.366148] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 1.366150] sd 8:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.366150] sd 8:0:0:0: [sdg] 4096-byte physical blocks
[ 1.366153] sd 8:0:0:0: [sdg] Write Protect is off
[ 1.366154] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 1.366159] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.366205] scsi 9:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
[ 1.366260] sd 9:0:0:0: Attached scsi generic sg7 type 0
[ 1.366272] sd 9:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.366273] sd 9:0:0:0: [sdh] 4096-byte physical blocks
[ 1.366277] sd 9:0:0:0: [sdh] Write Protect is off
[ 1.366278] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 1.366283] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.397318] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 1.397701] sd 9:0:0:0: [sdh] Attached SCSI disk
[ 1.406330] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.421914] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.421973] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.429605] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.431393] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.434254] sd 8:0:0:0: [sdg] Attached SCSI disk
[ 1.436062] Freeing unused decrypted memory: 2036K
[ 1.436445] Freeing unused kernel image (initmem) memory: 3000K
[ 1.443441] Write protecting the kernel read-only data: 24576k
[ 1.443913] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.444105] Freeing unused kernel image (rodata/data gap) memory: 784K
[ 1.444109] rodata_test: all tests were successful
[ 1.444114] Run /init as init process
[ 1.444115] with arguments:
[ 1.444115] /init
[ 1.444115] placeholder
[ 1.444116] rhgb
[ 1.444116] with environment:
[ 1.444117] HOME=/
[ 1.444117] TERM=linux
[ 1.444118] BOOT_IMAGE=/vmlinuz-5.10.28-2.fc32.qubes.x86_64
[ 1.449446] systemd[1]: systemd v245.9-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 1.461469] systemd[1]: Detected architecture x86-64.
[ 1.461471] systemd[1]: Running in initial RAM disk.
[ 1.461479] systemd[1]: Set hostname to <dom0>.
[ 1.490262] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 1.490293] systemd[1]: Reached target Local File Systems.
[ 1.490301] systemd[1]: Reached target Slices.
[ 1.490307] systemd[1]: Reached target Swap.
[ 1.490313] systemd[1]: Reached target Timers.
[ 1.490372] systemd[1]: Listening on Journal Audit Socket.
[ 1.490409] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.490446] systemd[1]: Listening on Journal Socket.
[ 1.490480] systemd[1]: Listening on udev Control Socket.
[ 1.490501] systemd[1]: Listening on udev Kernel Socket.
[ 1.490507] systemd[1]: Reached target Sockets.
[ 1.490857] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1.491701] systemd[1]: Starting Journal Service...
[ 1.492099] systemd[1]: Starting Load Kernel Modules...
[ 1.492486] systemd[1]: Starting Setup Virtual Console...
[ 1.492721] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1.493188] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.495976] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1.534297] systemd[1]: Started Journal Service.
[ 1.534347] audit: type=1130 audit(1618390813.139:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.538273] audit: type=1130 audit(1618390813.143:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.567596] audit: type=1130 audit(1618390813.173:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.667827] audit: type=1130 audit(1618390813.273:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.681238] audit: type=1130 audit(1618390813.286:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.681421] audit: type=1334 audit(1618390813.286:7): prog-id=6 op=LOAD
[ 1.681467] audit: type=1334 audit(1618390813.287:8): prog-id=7 op=LOAD
[ 1.698516] audit: type=1130 audit(1618390813.304:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.726931] audit: type=1130 audit(1618390813.332:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.810627] nvme nvme0: pci function 0000:01:00.0
[ 1.810689] nvme nvme1: pci function 0000:23:00.0
[ 1.817886] nvme nvme0: missing or invalid SUBNQN field.
[ 1.817940] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.818694] xhci_hcd 0000:2a:00.1: xHCI Host Controller
[ 1.818729] xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 1
[ 1.818889] xhci_hcd 0000:2a:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 1.818946] nvme nvme1: missing or invalid SUBNQN field.
[ 1.818961] nvme nvme1: Shutdown timeout set to 8 seconds
[ 1.819361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.819362] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.819363] usb usb1: Product: xHCI Host Controller
[ 1.819364] usb usb1: Manufacturer: Linux 5.10.28-2.fc32.qubes.x86_64 xhci-hcd
[ 1.819365] usb usb1: SerialNumber: 0000:2a:00.1
[ 1.819445] hub 1-0:1.0: USB hub found
[ 1.819456] hub 1-0:1.0: 6 ports detected
[ 1.819700] xhci_hcd 0000:2a:00.1: xHCI Host Controller
[ 1.819739] xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 2
[ 1.819740] xhci_hcd 0000:2a:00.1: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.819751] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.819769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.819771] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.819772] usb usb2: Product: xHCI Host Controller
[ 1.819773] usb usb2: Manufacturer: Linux 5.10.28-2.fc32.qubes.x86_64 xhci-hcd
[ 1.819773] usb usb2: SerialNumber: 0000:2a:00.1
[ 1.819883] hub 2-0:1.0: USB hub found
[ 1.819893] hub 2-0:1.0: 4 ports detected
[ 1.820210] xhci_hcd 0000:2a:00.3: xHCI Host Controller
[ 1.820249] xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 3
[ 1.820399] xhci_hcd 0000:2a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 1.820735] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.820736] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.820737] usb usb3: Product: xHCI Host Controller
[ 1.820737] usb usb3: Manufacturer: Linux 5.10.28-2.fc32.qubes.x86_64 xhci-hcd
[ 1.820738] usb usb3: SerialNumber: 0000:2a:00.3
[ 1.820795] hub 3-0:1.0: USB hub found
[ 1.820808] hub 3-0:1.0: 6 ports detected
[ 1.821010] xhci_hcd 0000:2a:00.3: xHCI Host Controller
[ 1.821036] xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 4
[ 1.821037] xhci_hcd 0000:2a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.821054] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.821066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.821067] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.821067] usb usb4: Product: xHCI Host Controller
[ 1.821068] usb usb4: Manufacturer: Linux 5.10.28-2.fc32.qubes.x86_64 xhci-hcd
[ 1.821068] usb usb4: SerialNumber: 0000:2a:00.3
[ 1.821177] hub 4-0:1.0: USB hub found
[ 1.821190] hub 4-0:1.0: 4 ports detected
[ 1.821245] usb: port power management may be unreliable
[ 1.821376] xhci_hcd 0000:2f:00.3: xHCI Host Controller
[ 1.821408] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 5
[ 1.821517] xhci_hcd 0000:2f:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 1.821818] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.821819] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.821820] usb usb5: Product: xHCI Host Controller
[ 1.821820] usb usb5: Manufacturer: Linux 5.10.28-2.fc32.qubes.x86_64 xhci-hcd
[ 1.821821] usb usb5: SerialNumber: 0000:2f:00.3
[ 1.821879] hub 5-0:1.0: USB hub found
[ 1.821885] hub 5-0:1.0: 4 ports detected
[ 1.822026] xhci_hcd 0000:2f:00.3: xHCI Host Controller
[ 1.822043] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 6
[ 1.822045] xhci_hcd 0000:2f:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.822054] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.822065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.822066] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.822067] usb usb6: Product: xHCI Host Controller
[ 1.822067] usb usb6: Manufacturer: Linux 5.10.28-2.fc32.qubes.x86_64 xhci-hcd
[ 1.822068] usb usb6: SerialNumber: 0000:2f:00.3
[ 1.822109] hub 6-0:1.0: USB hub found
[ 1.822114] hub 6-0:1.0: 4 ports detected
[ 1.824062] ccp 0000:2f:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[ 1.828409] ast 0000:29:00.0: [drm] Using P2A bridge for configuration
[ 1.828413] ast 0000:29:00.0: [drm] AST 2500 detected
[ 1.828422] ast 0000:29:00.0: [drm] Analog VGA only
[ 1.828430] ast 0000:29:00.0: [drm] dram MCLK=800 Mhz type=7 bus_width=16
[ 1.828476] [TTM] Zone kernel: Available graphics memory: 32922854 KiB
[ 1.828477] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 1.828477] [TTM] Initializing pool allocator
[ 1.828480] [TTM] Initializing DMA pool allocator
[ 1.828826] [drm] Initialized ast 0.1.0 20120228 for 0000:29:00.0 on minor 0
[ 1.835464] fbcon: astdrmfb (fb0) is primary device
[ 1.886659] nvme nvme0: 32/0/0 default/read/poll queues
[ 1.905925] nvme0n1: p1 p2
[ 2.008779] nvme nvme1: 32/0/0 default/read/poll queues
[ 2.027715] tsc: Refined TSC clocksource calibration: 3799.204 MHz
[ 2.027725] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d86cf33486, max_idle_ns: 881590412336 ns
[ 2.032344] clocksource: Switched to clocksource tsc
[ 2.033474] Console: switching to colour frame buffer device 128x48
[ 2.035113] ast 0000:29:00.0: [drm] fb0: astdrmfb frame buffer device
[ 2.035234] nvme1n1: p1 p2
[ 2.080711] md/raid1:md127: active with 2 out of 2 mirrors
[ 2.080918] md/raid1:md126: active with 2 out of 2 mirrors
[ 2.082739] md127: detected capacity change from 0 to 248849104896
[ 2.084572] md126: detected capacity change from 0 to 1071644672
[ 2.204484] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.216990] usb 4-1: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 2.05
[ 2.216992] usb 4-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[ 2.216992] usb 4-1: Product: USB to ATA/ATAPI Bridge
[ 2.216993] usb 4-1: Manufacturer: JMicron
[ 2.216994] usb 4-1: SerialNumber: 152D00539000
[ 2.219724] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 2.219800] usb-storage 4-1:1.0: Quirks match for vid 152d pid 0567: 5000000
[ 2.219817] scsi host10: usb-storage 4-1:1.0
[ 2.219862] usbcore: registered new interface driver usb-storage
[ 2.220838] usbcore: registered new interface driver uas
[ 2.330444] usb 3-5: new high-speed USB device number 2 using xhci_hcd
[ 2.465919] usb 3-5: New USB device found, idVendor=046b, idProduct=ff01, bcdDevice= 1.00
[ 2.465921] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.465922] usb 3-5: Product: Virtual Hub
[ 2.465923] usb 3-5: Manufacturer: American Megatrends Inc.
[ 2.465923] usb 3-5: SerialNumber: serial
[ 2.526069] hub 3-5:1.0: USB hub found
[ 2.526415] hub 3-5:1.0: 5 ports detected
[ 2.811458] usb 3-5.1: new high-speed USB device number 3 using xhci_hcd
[ 2.900377] usb 3-5.1: New USB device found, idVendor=046b, idProduct=ff20, bcdDevice= 1.00
[ 2.900379] usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.900380] usb 3-5.1: Product: Virtual Cdrom Device
[ 2.900381] usb 3-5.1: Manufacturer: American Megatrends Inc.
[ 2.900382] usb 3-5.1: SerialNumber: AAAABBBBCCCC1
[ 2.901496] usb-storage 3-5.1:1.0: USB Mass Storage device detected
[ 2.901628] scsi host11: usb-storage 3-5.1:1.0
[ 2.975880] usb 3-5.3: new high-speed USB device number 4 using xhci_hcd
[ 3.068399] usb 3-5.3: New USB device found, idVendor=046b, idProduct=ffb0, bcdDevice= 1.00
[ 3.068402] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.068403] usb 3-5.3: Product: Virtual Ethernet
[ 3.068403] usb 3-5.3: Manufacturer: American Megatrends Inc.
[ 3.068404] usb 3-5.3: SerialNumber: 1234567890
[ 3.178445] usb 3-5.4: new low-speed USB device number 5 using xhci_hcd
[ 3.228009] scsi 10:0:0:0: Direct-Access ST2000DM 006-2DM164 0125 PQ: 0 ANSI: 6
[ 3.228233] scsi 10:0:0:1: Direct-Access ST2000DM 006-2DM164 0125 PQ: 0 ANSI: 6
[ 3.228418] scsi 10:0:0:2: Direct-Access ST2000DM 006-2DM164 0125 PQ: 0 ANSI: 6
[ 3.228611] scsi 10:0:0:3: Direct-Access ST2000DM 006-2DM164 0125 PQ: 0 ANSI: 6
[ 3.228785] scsi 10:0:0:4: Direct-Access ST2000DM 006-2DM164 0125 PQ: 0 ANSI: 6
[ 3.228949] scsi 10:0:0:5: Direct-Access WDC WD20 EZRX-00D8PB0 0125 PQ: 0 ANSI: 6
[ 3.229111] scsi 10:0:0:6: Direct-Access TOSHIBA MG08ACA16TE 0125 PQ: 0 ANSI: 6
[ 3.229273] scsi 10:0:0:7: Direct-Access ST16000N M001G-2KK103 0125 PQ: 0 ANSI: 6
[ 3.229384] sd 10:0:0:0: Attached scsi generic sg8 type 0
[ 3.229447] sd 10:0:0:1: Attached scsi generic sg9 type 0
[ 3.229533] sd 10:0:0:2: Attached scsi generic sg10 type 0
[ 3.229547] sd 10:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.229607] sd 10:0:0:3: Attached scsi generic sg11 type 0
[ 3.229675] sd 10:0:0:4: Attached scsi generic sg12 type 0
[ 3.229738] sd 10:0:0:1: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.229758] sd 10:0:0:5: Attached scsi generic sg13 type 0
[ 3.229857] sd 10:0:0:6: Attached scsi generic sg14 type 0
[ 3.229956] sd 10:0:0:7: Attached scsi generic sg15 type 0
[ 3.230077] sd 10:0:0:1: [sdj] Write Protect is off
[ 3.230079] sd 10:0:0:1: [sdj] Mode Sense: 67 00 10 08
[ 3.230586] sd 10:0:0:2: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.231209] sd 10:0:0:0: [sdi] Write Protect is off
[ 3.231211] sd 10:0:0:0: [sdi] Mode Sense: 67 00 10 08
[ 3.231369] sd 10:0:0:1: [sdj] No Caching mode page found
[ 3.231371] sd 10:0:0:1: [sdj] Assuming drive cache: write through
[ 3.231505] sd 10:0:0:0: [sdi] No Caching mode page found
[ 3.231507] sd 10:0:0:0: [sdi] Assuming drive cache: write through
[ 3.231643] sd 10:0:0:2: [sdk] Write Protect is off
[ 3.231645] sd 10:0:0:2: [sdk] Mode Sense: 67 00 10 08
[ 3.231780] sd 10:0:0:2: [sdk] No Caching mode page found
[ 3.231781] sd 10:0:0:2: [sdk] Assuming drive cache: write through
[ 3.231981] sd 10:0:0:3: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.232116] sd 10:0:0:3: [sdl] Write Protect is off
[ 3.232117] sd 10:0:0:3: [sdl] Mode Sense: 67 00 10 08
[ 3.232252] sd 10:0:0:3: [sdl] No Caching mode page found
[ 3.232253] sd 10:0:0:3: [sdl] Assuming drive cache: write through
[ 3.232455] sd 10:0:0:4: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.232587] sd 10:0:0:4: [sdm] Write Protect is off
[ 3.232588] sd 10:0:0:4: [sdm] Mode Sense: 67 00 10 08
[ 3.233327] sd 10:0:0:4: [sdm] No Caching mode page found
[ 3.233328] sd 10:0:0:4: [sdm] Assuming drive cache: write through
[ 3.233512] sd 10:0:0:5: [sdn] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.233710] sd 10:0:0:6: [sdo] Very big device. Trying to use READ CAPACITY(16).
[ 3.233843] sd 10:0:0:5: [sdn] Write Protect is off
[ 3.233845] sd 10:0:0:5: [sdn] Mode Sense: 67 00 10 08
[ 3.234039] sd 10:0:0:7: [sdp] Very big device. Trying to use READ CAPACITY(16).
[ 3.234157] sd 10:0:0:6: [sdo] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB)
[ 3.234158] sd 10:0:0:6: [sdo] 4096-byte physical blocks
[ 3.234283] sd 10:0:0:5: [sdn] No Caching mode page found
[ 3.234285] sd 10:0:0:5: [sdn] Assuming drive cache: write through
[ 3.234402] sd 10:0:0:7: [sdp] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB)
[ 3.234403] sd 10:0:0:7: [sdp] 4096-byte physical blocks
[ 3.234529] sd 10:0:0:6: [sdo] Write Protect is off
[ 3.234531] sd 10:0:0:6: [sdo] Mode Sense: 67 00 10 08
[ 3.234658] sd 10:0:0:7: [sdp] Write Protect is off
[ 3.234658] sd 10:0:0:7: [sdp] Mode Sense: 67 00 10 08
[ 3.234786] sd 10:0:0:6: [sdo] No Caching mode page found
[ 3.234787] sd 10:0:0:6: [sdo] Assuming drive cache: write through
[ 3.234911] sd 10:0:0:7: [sdp] No Caching mode page found
[ 3.234911] sd 10:0:0:7: [sdp] Assuming drive cache: write through
[ 3.240884] sdi:
[ 3.241213] sdk:
[ 3.241741] sd 10:0:0:0: [sdi] Attached SCSI disk
[ 3.242130] sd 10:0:0:2: [sdk] Attached SCSI disk
[ 3.242876] sdj:
[ 3.243212] sdm:
[ 3.243825] sd 10:0:0:4: [sdm] Attached SCSI disk
[ 3.244279] sd 10:0:0:1: [sdj] Attached SCSI disk
[ 3.296301] usb 3-5.4: New USB device found, idVendor=046b, idProduct=ff10, bcdDevice= 1.00
[ 3.296303] usb 3-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.296304] usb 3-5.4: Product: Virtual Keyboard and Mouse
[ 3.296305] usb 3-5.4: Manufacturer: American Megatrends Inc.
[ 3.402944] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-5/3-5.4/3-5.4:1.0/0003:046B:FF10.0001/input/input2
[ 3.403063] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:2a:00.3-5.4/input0
[ 3.419064] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-5/3-5.4/3-5.4:1.1/0003:046B:FF10.0002/input/input3
[ 3.419185] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:2a:00.3-5.4/input1
[ 3.438623] sdl:
[ 3.439358] sd 10:0:0:3: [sdl] Attached SCSI disk
[ 3.445796] sdn:
[ 3.693642] sd 10:0:0:5: [sdn] Attached SCSI disk
[ 3.696230] sd 10:0:0:7: [sdp] Attached SCSI disk
[ 3.715966] sd 10:0:0:6: [sdo] Attached SCSI disk
[ 3.942686] scsi 11:0:0:0: CD-ROM AMI Virtual CDROM0 1.00 PQ: 0 ANSI: 0 CCS
[ 3.953071] sr 11:0:0:0: [sr0] scsi-1 drive
[ 3.953072] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.961847] sr 11:0:0:0: Attached scsi CD-ROM sr0
[ 3.961911] sr 11:0:0:0: Attached scsi generic sg16 type 5
[ 9.691934] kauditd_printk_skb: 15 callbacks suppressed
[ 9.691935] audit: type=1130 audit(1618390821.298:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@luks\x2dda45b295\x2d82dd\x2d4e41\x2d8203\x2dd54b63bc70a5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.801723] audit: type=1130 audit(1618390822.408:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.807959] audit: type=1130 audit(1618390822.414:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.825680] audit: type=1130 audit(1618390822.432:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.830028] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 10.843684] audit: type=1334 audit(1618390822.450:30): prog-id=10 op=UNLOAD
[ 10.843686] audit: type=1334 audit(1618390822.450:31): prog-id=9 op=UNLOAD
[ 10.843687] audit: type=1334 audit(1618390822.450:32): prog-id=8 op=UNLOAD
[ 10.845026] audit: type=1334 audit(1618390822.451:33): prog-id=12 op=UNLOAD
[ 10.845153] audit: type=1334 audit(1618390822.451:34): prog-id=11 op=UNLOAD
[ 10.922369] audit: type=1334 audit(1618390822.528:35): prog-id=13 op=LOAD
[ 11.074572] systemd-journald[378]: Received SIGTERM from PID 1 (systemd).
[ 11.140204] systemd[1]: systemd v245.9-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 11.151537] systemd[1]: Detected architecture x86-64.
[ 11.152020] systemd[1]: Set hostname to <dom0>.
[ 11.299559] systemd[1]: initrd-switch-root.service: Succeeded.
[ 11.299628] systemd[1]: Stopped Switch Root.
[ 11.299783] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 11.299890] systemd[1]: Created slice system-getty.slice.
[ 11.300111] systemd[1]: Created slice system-modprobe.slice.
[ 11.300432] systemd[1]: Created slice system-qubes\x2dvm.slice.
[ 11.300538] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.300836] systemd[1]: Created slice User and Session Slice.
[ 11.305928] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 11.305978] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.306122] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.308878] systemd[1]: Reached target Block Device Preparation for /dev/mapper/luks-da45b295-82dd-4e41-8203-d54b63bc70a5.
[ 11.308954] systemd[1]: Reached target Login Prompts.
[ 11.308964] systemd[1]: Stopped target Switch Root.
[ 11.308971] systemd[1]: Stopped target Initrd File Systems.
[ 11.308977] systemd[1]: Stopped target Initrd Root File System.
[ 11.309014] systemd[1]: Reached target Paths.
[ 11.309047] systemd[1]: Reached target Remote Encrypted Volumes.
[ 11.309080] systemd[1]: Reached target Remote File Systems.
[ 11.309112] systemd[1]: Reached target Slices.
[ 11.309170] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.310131] systemd[1]: Listening on Process Core Dump Socket.
[ 11.314433] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.314551] systemd[1]: Listening on udev Control Socket.
[ 11.318973] systemd[1]: Listening on udev Kernel Socket.
[ 11.319152] systemd[1]: Listening on User Database Manager Socket.
[ 11.325892] systemd[1]: Activating swap /dev/mapper/qubes_dom0-swap...
[ 11.331893] systemd[1]: Mounting Huge Pages File System...
[ 11.337601] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.343101] systemd[1]: Condition check resulted in Mount /proc/xen files being skipped.
[ 11.343589] systemd[1]: Mounting Kernel Debug File System...
[ 11.348804] systemd[1]: Mounting Kernel Trace File System...
[ 11.353691] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 11.360660] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 11.363470] systemd[1]: Condition check resulted in Load Kernel Module configfs being skipped.
[ 11.363904] systemd[1]: Mounting Kernel Configuration File System...
[ 11.369473] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 11.369953] systemd[1]: Starting Load Kernel Module fuse...
[ 11.372086] systemd[1]: plymouth-switch-root.service: Succeeded.
[ 11.372159] systemd[1]: Stopped Plymouth switch root service.
[ 11.375616] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 11.375639] systemd[1]: Stopped Journal Service.
[ 11.377935] systemd[1]: Starting Journal Service...
[ 11.379746] systemd[1]: Starting Load Kernel Modules...
[ 11.379932] fuse: init (API version 7.32)
[ 11.380479] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.381020] systemd[1]: Starting Repartition Root Disk...
[ 11.381561] systemd[1]: Starting udev Coldplug all Devices...
[ 11.382331] systemd[1]: sysroot.mount: Succeeded.
[ 11.382559] systemd[1]: Mounted Huge Pages File System.
[ 11.382642] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.383072] systemd[1]: Mounted Kernel Debug File System.
[ 11.383432] systemd[1]: Mounted Kernel Trace File System.
[ 11.383593] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 11.383902] systemd[1]: Mounted Kernel Configuration File System.
[ 11.384263] systemd[1]: modprobe@fuse.service: Succeeded.
[ 11.384332] systemd[1]: Finished Load Kernel Module fuse.
[ 11.385070] systemd[1]: Mounting FUSE Control File System...
[ 11.386480] systemd[1]: Mounted FUSE Control File System.
[ 11.386749] systemd[1]: Finished Repartition Root Disk.
[ 11.401351] systemd[1]: Started Journal Service.
[ 11.423456] Adding 4136956k swap on /dev/mapper/qubes_dom0-swap. Priority:-2 extents:1 across:4136956k SSFS
[ 11.428380] EXT4-fs (dm-4): re-mounted. Opts: discard
[ 11.454163] systemd-journald[1246]: Received client request to flush runtime journal.
[ 11.576645] acpi_cpufreq: overriding BIOS provided _PSD data
[ 11.605660] IPMI message handler: version 39.2
[ 11.606988] ipmi device interface
[ 11.609258] ipmi_si: IPMI System Interface driver
[ 11.610050] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 11.610242] dca service started, version 1.12.1
[ 11.611196] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 11.613837] ipmi_si: Adding ACPI-specified kcs state machine
[ 11.613888] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 11.616252] igb: Intel(R) Gigabit Ethernet Network Driver
[ 11.616253] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 11.654309] pps pps0: new PPS source ptp0
[ 11.654336] igb 0000:26:00.0: added PHC on eth0
[ 11.654337] igb 0000:26:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 11.654338] igb 0000:26:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:50:99:df:7a:ed
[ 11.654679] igb 0000:26:00.0: eth0: PBA No: 001300-000
[ 11.654680] igb 0000:26:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 11.655542] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 11.655544] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 11.668961] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.668963] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 11.669032] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 11.670402] megasas: 07.714.04.00-rc1
[ 11.670407] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 11.671020] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 11.671081] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 11.671133] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 11.671137] megaraid_sas 0000:2d:00.0: BAR:0x1 BAR's base_addr(phys):0x00000000fc400000 mapped virt_addr:0x00000000f7dafcd2
[ 11.671140] megaraid_sas 0000:2d:00.0: FW now in Ready state
[ 11.671141] megaraid_sas 0000:2d:00.0: 63 bit DMA mask and 32 bit consistent mask
[ 11.671397] megaraid_sas 0000:2d:00.0: firmware supports msix : (96)
[ 11.672074] megaraid_sas 0000:2d:00.0: requested/available msix 25/25
[ 11.672077] megaraid_sas 0000:2d:00.0: current msix/online cpus : (25/24)
[ 11.672078] megaraid_sas 0000:2d:00.0: RDPQ mode : (disabled)
[ 11.672081] megaraid_sas 0000:2d:00.0: Current firmware supports maximum commands: 272 LDIO threshold: 237
[ 11.672166] megaraid_sas 0000:2d:00.0: Configured max firmware commands: 271
[ 11.672520] megaraid_sas 0000:2d:00.0: Performance mode :Latency
[ 11.672521] megaraid_sas 0000:2d:00.0: FW supports sync cache : Yes
[ 11.672524] megaraid_sas 0000:2d:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 11.694502] pps pps1: new PPS source ptp1
[ 11.694527] igb 0000:27:00.0: added PHC on eth1
[ 11.694528] igb 0000:27:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 11.694530] igb 0000:27:00.0: eth1: (PCIe:2.5Gb/s:Width x1) d0:50:99:df:7a:ec
[ 11.694697] igb 0000:27:00.0: eth1: PBA No: 001300-000
[ 11.694698] igb 0000:27:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 11.695521] megaraid_sas 0000:2d:00.0: Init cmd return status FAILED for SCSI host 12
[ 11.695910] megaraid_sas 0000:2d:00.0: Failed from megasas_init_fw 6406
[ 11.697033] cdc_ether 3-5.3:2.0 usb0: register 'cdc_ether' at usb-0000:2a:00.3-5.3, CDC Ethernet Device, 2e:b3:ba:5f:af:f9
[ 11.697055] usbcore: registered new interface driver cdc_ether
[ 11.726950] async_tx: api initialized (async)
[ 11.728618] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 11.728619] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 11.754800] md/raid1:md124: active with 2 out of 2 mirrors
[ 11.754841] md/raid:md125: device sdg operational as raid disk 2
[ 11.754842] md/raid:md125: device sdf operational as raid disk 7
[ 11.754842] md/raid:md125: device sdh operational as raid disk 0
[ 11.754843] md/raid:md125: device sde operational as raid disk 1
[ 11.754843] md/raid:md125: device sdc operational as raid disk 3
[ 11.754844] md/raid:md125: device sdd operational as raid disk 5
[ 11.754844] md/raid:md125: device sdb operational as raid disk 4
[ 11.754845] md/raid:md125: device sda operational as raid disk 6
[ 11.755247] md/raid:md125: raid level 6 active with 8 out of 8 devices, algorithm 2
[ 11.764140] md/raid:md0: device sdm operational as raid disk 2
[ 11.764193] md/raid:md0: device sdl operational as raid disk 0
[ 11.764201] md/raid:md0: device sdj operational as raid disk 5
[ 11.764204] md/raid:md0: device sdn operational as raid disk 1
[ 11.764207] md/raid:md0: device sdk operational as raid disk 3
[ 11.764212] md/raid:md0: device sdi operational as raid disk 4
[ 11.765893] md/raid:md0: raid level 6 active with 6 out of 6 devices, algorithm 2
[ 11.766217] md124: detected capacity change from 0 to 16000765394944
[ 11.768095] md0: detected capacity change from 0 to 8001054310400
[ 11.769676] md0: p1
[ 11.772967] kvm: Nested Virtualization enabled
[ 11.772973] SVM: kvm: Nested Paging enabled
[ 11.772973] SVM: Virtual VMLOAD VMSAVE supported
[ 11.772974] SVM: Virtual GIF supported
[ 11.780712] md125: detected capacity change from 0 to 12001581465600
[ 11.821520] MCE: In-kernel MCE decoding enabled.
[ 11.824973] EDAC amd64: F17h_M70h detected (node 0).
[ 11.825427] EDAC amd64: Node 0: DRAM ECC disabled.
[ 11.832860] igb 0000:26:00.0 enp38s0: renamed from eth0
[ 11.874810] igb 0000:27:00.0 enp39s0: renamed from eth1
[ 11.901069] cdc_ether 3-5.3:2.0 enp42s0f3u5u3c2: renamed from usb0
[ 11.911173] EDAC amd64: F17h_M70h detected (node 0).
[ 11.911218] EDAC amd64: Node 0: DRAM ECC disabled.
[ 11.925508] snd_hda_intel 0000:2f:00.4: no codecs found!
[ 11.977934] EDAC amd64: F17h_M70h detected (node 0).
[ 11.977978] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.014888] EDAC amd64: F17h_M70h detected (node 0).
[ 12.014931] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.064115] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x00c1d6, prod_id: 0x0202, dev_id: 0x20)
[ 12.090702] EDAC amd64: F17h_M70h detected (node 0).
[ 12.090750] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.309094] EDAC amd64: F17h_M70h detected (node 0).
[ 12.309143] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.347466] ixgbe 0000:24:00.0: Multiqueue Enabled: Rx Queue count = 24, Tx Queue count = 24 XDP Queue count = 0
[ 12.371428] EDAC amd64: F17h_M70h detected (node 0).
[ 12.371507] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.431929] EDAC amd64: F17h_M70h detected (node 0).
[ 12.431975] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.445473] ixgbe 0000:24:00.0: 31.504 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x4 link)
[ 12.452174] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 12.525892] EDAC amd64: F17h_M70h detected (node 0).
[ 12.525950] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.527162] ipmi_ssif: IPMI SSIF Interface driver
[ 12.557449] ixgbe 0000:24:00.0: MAC: 4, PHY: 0, PBA No: 000000-000
[ 12.557452] ixgbe 0000:24:00.0: d0:50:99:df:7a:ee
[ 12.584143] EDAC amd64: F17h_M70h detected (node 0).
[ 12.584191] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.660022] EDAC amd64: F17h_M70h detected (node 0).
[ 12.660065] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.716480] ixgbe 0000:24:00.0: Intel(R) 10 Gigabit Network Connection
[ 12.716601] libphy: ixgbe-mdio: probed
[ 12.729234] EDAC amd64: F17h_M70h detected (node 0).
[ 12.729277] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.790149] EDAC amd64: F17h_M70h detected (node 0).
[ 12.790196] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.857411] EDAC amd64: F17h_M70h detected (node 0).
[ 12.857483] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.921302] EDAC amd64: F17h_M70h detected (node 0).
[ 12.921354] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.000300] EDAC amd64: F17h_M70h detected (node 0).
[ 13.000352] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.046341] EDAC amd64: F17h_M70h detected (node 0).
[ 13.046399] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.110006] EDAC amd64: F17h_M70h detected (node 0).
[ 13.110052] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.186885] EDAC amd64: F17h_M70h detected (node 0).
[ 13.186934] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.246092] EDAC amd64: F17h_M70h detected (node 0).
[ 13.246145] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.310187] EDAC amd64: F17h_M70h detected (node 0).
[ 13.310239] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.354916] EDAC amd64: F17h_M70h detected (node 0).
[ 13.354960] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.384175] EDAC amd64: F17h_M70h detected (node 0).
[ 13.384223] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.403826] ixgbe 0000:24:00.1: Multiqueue Enabled: Rx Queue count = 24, Tx Queue count = 24 XDP Queue count = 0
[ 13.407970] EDAC amd64: F17h_M70h detected (node 0).
[ 13.408012] EDAC amd64: Node 0: DRAM ECC disabled.
[ 13.501737] ixgbe 0000:24:00.1: 31.504 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x4 link)
[ 13.613447] ixgbe 0000:24:00.1: MAC: 4, PHY: 0, PBA No: 000000-000
[ 13.613451] ixgbe 0000:24:00.1: d0:50:99:df:7a:ef
[ 13.773233] ixgbe 0000:24:00.1: Intel(R) 10 Gigabit Network Connection
[ 13.773311] libphy: ixgbe-mdio: probed
[ 13.776618] ixgbe 0000:24:00.1 enp36s0f1: renamed from eth1
[ 13.798843] ixgbe 0000:24:00.0 enp36s0f0: renamed from eth0
[ 14.939861] kauditd_printk_skb: 71 callbacks suppressed
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MegaRaid SAS 9341-8i issue
2021-04-14 10:38 ` Frédéric Pierret
@ 2021-04-14 11:17 ` Sumit Saxena
0 siblings, 0 replies; 6+ messages in thread
From: Sumit Saxena @ 2021-04-14 11:17 UTC (permalink / raw)
To: Frédéric Pierret
Cc: Kashyap Desai, Shivasharan Srikanteshwara, James E.J. Bottomley,
Martin K. Petersen, PDL,MEGARAIDLINUX, Linux SCSI List
[-- Attachment #1: Type: text/plain, Size: 1460 bytes --]
On Wed, Apr 14, 2021 at 4:08 PM Frédéric Pierret
<frederic.pierret@qubes-os.org> wrote:
Hi Frédéric,
>
>
> Thank you for the patch. I've tested your patch on a 5.10.28 kernel but unfortunately it does not change the driver load behavior. I've attached the dmesg. Don't pay attention to the "qubes" tag in kernel, I've just used the same spec for building the test kernel than we do in QubesOS but here it's a standard Fedora kernel config and build for this 5.10.28 + standard kernel source.
>
> What I can tell is that the card is found at the BIOS POST (the controller appears and proposes to go into controller).
>
> Are you eventually aware a working 9341-8i on a motherboard X570 chipset? Just thinking if that could be related or not. I've also tried once again to change PCIe lanes but that's not >helping. I've also checked that the current PCIe 4.0 supports PCIe 3.0 according to the manual (https://download.asrock.com/Manual/X570D4U-2L2T.pdf). A last point, I've only filled the two >NVMe ports with standard NVMe drives (Samsung 970 256G) and I'm not having any other extension so I would not think it's related to lack of lanes or such?
I don't have any information on 9341-8i working on X570 chipset. dmesg
says that IOC INIT command is being failed by megaraid firmware so
need to check
controller firmware logs. Please get in touch with the Broadcom support channel.
Thanks,
Sumit
>
> Best regards,
> Frédéric
>
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-04-14 11:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-28 16:56 MegaRaid SAS 9341-8i issue Frédéric Pierret
2021-03-29 6:24 ` Kashyap Desai
[not found] ` <12383f2a-9f7b-ea95-ff52-785b91c1bac8@qubes-os.org>
2021-04-09 6:25 ` Frédéric Pierret
2021-04-12 12:04 ` Sumit Saxena
2021-04-14 10:38 ` Frédéric Pierret
2021-04-14 11:17 ` Sumit Saxena
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.