* [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support
@ 2018-03-16 21:46 Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 1/4] tpm: extend TPM emulator " Stefan Berger
` (4 more replies)
0 siblings, 5 replies; 10+ messages in thread
From: Stefan Berger @ 2018-03-16 21:46 UTC (permalink / raw)
To: qemu-devel; +Cc: dgilbert, marcandre.lureau, Stefan Berger
This series of patches implements support for migrating the state of the
external 'swtpm' TPM emulator as well as that of the TIS interface.
For testing of TPM 2 (migration) please use the following git repos and
branches:
libtpms:
- repo: https://github.com/stefanberger/libtpms
- branch: tpm2-preview.rev146.v2
swtpm:
- repo: https://github.com/stefanberger/swtpm
- branch: tpm2-preview.rev146.v2
Regards,
Stefan
Changes:
v4->v5:
- followed Marc-André's and Alan's comments where possible; some comments
were not addressed and reasons posted to mailing list
- converted debug statements to tracing
- qemu_chr_fe_read_all does not return errno, so displaying expected versus
received number of bytes rather than strerror(errno)
- added test cases
- added documentation for migration to docs/spec/tpm.txt
v3->v4:
- dropped the size limit enforcement on blobs received from the swtpm
- the .post_load migration function requires errno's to be returned.
-> some of the functions have been converted to return a better errno
Stefan Berger (4):
tpm: extend TPM emulator with state migration support
tpm: extend TPM TIS with state migration support
docs: tpm: add VM save/restore example and troubleshooting guide
tpm: Add test cases that uses the external swtpm with CRB interface
docs/specs/tpm.txt | 106 +++++++++++++++
hw/tpm/tpm_emulator.c | 318 +++++++++++++++++++++++++++++++++++++++++++--
hw/tpm/tpm_tis.c | 52 +++++++-
hw/tpm/trace-events | 9 +-
tests/Makefile.include | 3 +
tests/tpm-crb-swtpm-test.c | 243 ++++++++++++++++++++++++++++++++++
6 files changed, 717 insertions(+), 14 deletions(-)
create mode 100644 tests/tpm-crb-swtpm-test.c
--
2.5.5
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v5 for 2.13 1/4] tpm: extend TPM emulator with state migration support
2018-03-16 21:46 [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support Stefan Berger
@ 2018-03-16 21:46 ` Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 2/4] tpm: extend TPM TIS " Stefan Berger
` (3 subsequent siblings)
4 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-03-16 21:46 UTC (permalink / raw)
To: qemu-devel; +Cc: dgilbert, marcandre.lureau, Stefan Berger
Extend the TPM emulator backend device with state migration support.
The external TPM emulator 'swtpm' provides a protocol over
its control channel to retrieve its state blobs. We implement
functions for getting and setting the different state blobs.
In case the setting of the state blobs fails, we return a
negative errno code to fail the start of the VM.
Since we have an external TPM emulator, we need to make sure
that we do not migrate the state for as long as it is busy
processing a request. We need to wait for notification that
the request has completed processing.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
hw/tpm/tpm_emulator.c | 318 ++++++++++++++++++++++++++++++++++++++++++++++++--
hw/tpm/trace-events | 8 +-
2 files changed, 314 insertions(+), 12 deletions(-)
diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c
index 6418ef0..6d6158d 100644
--- a/hw/tpm/tpm_emulator.c
+++ b/hw/tpm/tpm_emulator.c
@@ -4,7 +4,7 @@
* Copyright (c) 2017 Intel Corporation
* Author: Amarnath Valluri <amarnath.valluri@intel.com>
*
- * Copyright (c) 2010 - 2013 IBM Corporation
+ * Copyright (c) 2010 - 2013, 2018 IBM Corporation
* Authors:
* Stefan Berger <stefanb@us.ibm.com>
*
@@ -49,6 +49,19 @@
#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps & (cap)) == (cap))
/* data structures */
+
+/* blobs from the TPM; part of VM state when migrating */
+typedef struct TPMBlobBuffers {
+ uint32_t permanent_flags;
+ TPMSizedBuffer permanent;
+
+ uint32_t volatil_flags;
+ TPMSizedBuffer volatil;
+
+ uint32_t savestate_flags;
+ TPMSizedBuffer savestate;
+} TPMBlobBuffers;
+
typedef struct TPMEmulator {
TPMBackend parent;
@@ -64,6 +77,8 @@ typedef struct TPMEmulator {
unsigned int established_flag:1;
unsigned int established_flag_cached:1;
+
+ TPMBlobBuffers state_blobs;
} TPMEmulator;
@@ -293,7 +308,8 @@ static int tpm_emulator_set_buffer_size(TPMBackend *tb,
return 0;
}
-static int tpm_emulator_startup_tpm(TPMBackend *tb, size_t buffersize)
+static int tpm_emulator_startup_tpm_resume(TPMBackend *tb, size_t buffersize,
+ bool is_resume)
{
TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
ptm_init init = {
@@ -301,12 +317,17 @@ static int tpm_emulator_startup_tpm(TPMBackend *tb, size_t buffersize)
};
ptm_res res;
+ trace_tpm_emulator_startup_tpm_resume(is_resume, buffersize);
+
if (buffersize != 0 &&
tpm_emulator_set_buffer_size(tb, buffersize, NULL) < 0) {
goto err_exit;
}
- trace_tpm_emulator_startup_tpm();
+ if (is_resume) {
+ init.u.req.init_flags |= cpu_to_be32(PTM_INIT_FLAG_DELETE_VOLATILE);
+ }
+
if (tpm_emulator_ctrlcmd(tpm_emu, CMD_INIT, &init, sizeof(init),
sizeof(init)) < 0) {
error_report("tpm-emulator: could not send INIT: %s",
@@ -325,6 +346,11 @@ err_exit:
return -1;
}
+static int tpm_emulator_startup_tpm(TPMBackend *tb, size_t buffersize)
+{
+ return tpm_emulator_startup_tpm_resume(tb, buffersize, false);
+}
+
static bool tpm_emulator_get_tpm_established_flag(TPMBackend *tb)
{
TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
@@ -423,16 +449,21 @@ static size_t tpm_emulator_get_buffer_size(TPMBackend *tb)
static int tpm_emulator_block_migration(TPMEmulator *tpm_emu)
{
Error *err = NULL;
+ ptm_cap caps = PTM_CAP_GET_STATEBLOB | PTM_CAP_SET_STATEBLOB |
+ PTM_CAP_STOP;
- error_setg(&tpm_emu->migration_blocker,
- "Migration disabled: TPM emulator not yet migratable");
- migrate_add_blocker(tpm_emu->migration_blocker, &err);
- if (err) {
- error_report_err(err);
- error_free(tpm_emu->migration_blocker);
- tpm_emu->migration_blocker = NULL;
+ if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, caps)) {
+ error_setg(&tpm_emu->migration_blocker,
+ "Migration disabled: TPM emulator does not support "
+ "migration");
+ migrate_add_blocker(tpm_emu->migration_blocker, &err);
+ if (err) {
+ error_report_err(err);
+ error_free(tpm_emu->migration_blocker);
+ tpm_emu->migration_blocker = NULL;
- return -1;
+ return -1;
+ }
}
return 0;
@@ -570,6 +601,267 @@ static const QemuOptDesc tpm_emulator_cmdline_opts[] = {
{ /* end of list */ },
};
+/*
+ * Transfer a TPM state blob from the TPM into a provided buffer.
+ *
+ * @tpm_emu: TPMEmulator
+ * @type: the type of blob to transfer
+ * @tsb: the TPMSizeBuffer to fill with the blob
+ * @flags: the flags to return to the caller
+ */
+static int tpm_emulator_get_state_blob(TPMEmulator *tpm_emu,
+ uint8_t type,
+ TPMSizedBuffer *tsb,
+ uint32_t *flags)
+{
+ ptm_getstate pgs;
+ ptm_res res;
+ ssize_t n;
+ uint32_t totlength, length;
+
+ tpm_sized_buffer_reset(tsb);
+
+ pgs.u.req.state_flags = cpu_to_be32(PTM_STATE_FLAG_DECRYPTED);
+ pgs.u.req.type = cpu_to_be32(type);
+ pgs.u.req.offset = 0;
+
+ if (tpm_emulator_ctrlcmd(tpm_emu, CMD_GET_STATEBLOB,
+ &pgs, sizeof(pgs.u.req),
+ offsetof(ptm_getstate, u.resp.data)) < 0) {
+ error_report("tpm-emulator: could not get state blob type %d : %s",
+ type, strerror(errno));
+ return -1;
+ }
+
+ res = be32_to_cpu(pgs.u.resp.tpm_result);
+ if (res != 0 && (res & 0x800) == 0) {
+ error_report("tpm-emulator: Getting the stateblob (type %d) failed "
+ "with a TPM error 0x%x", type, res);
+ return -1;
+ }
+
+ totlength = be32_to_cpu(pgs.u.resp.totlength);
+ length = be32_to_cpu(pgs.u.resp.length);
+ if (totlength != length) {
+ error_report("tpm-emulator: Expecting to read %u bytes "
+ "but would get %u", totlength, length);
+ return -1;
+ }
+
+ *flags = be32_to_cpu(pgs.u.resp.state_flags);
+
+ if (totlength > 0) {
+ tsb->buffer = g_try_malloc(totlength);
+ if (!tsb->buffer) {
+ error_report("tpm-emulator: Out of memory allocating %u bytes",
+ totlength);
+ return -1;
+ }
+
+ n = qemu_chr_fe_read_all(&tpm_emu->ctrl_chr, tsb->buffer, totlength);
+ if (n != totlength) {
+ error_report("tpm-emulator: Could not read stateblob (type %d); "
+ "expected %u bytes, got %zd",
+ type, totlength, n);
+ return -1;
+ }
+ }
+ tsb->size = totlength;
+
+ trace_tpm_emulator_get_state_blob(type, tsb->size, *flags);
+
+ return 0;
+}
+
+static int tpm_emulator_get_state_blobs(TPMEmulator *tpm_emu)
+{
+ TPMBlobBuffers *state_blobs = &tpm_emu->state_blobs;
+
+ if (tpm_emulator_get_state_blob(tpm_emu, PTM_BLOB_TYPE_PERMANENT,
+ &state_blobs->permanent,
+ &state_blobs->permanent_flags) < 0 ||
+ tpm_emulator_get_state_blob(tpm_emu, PTM_BLOB_TYPE_VOLATILE,
+ &state_blobs->volatil,
+ &state_blobs->volatil_flags) < 0 ||
+ tpm_emulator_get_state_blob(tpm_emu, PTM_BLOB_TYPE_SAVESTATE,
+ &state_blobs->savestate,
+ &state_blobs->savestate_flags) < 0) {
+ goto err_exit;
+ }
+
+ return 0;
+
+ err_exit:
+ tpm_sized_buffer_reset(&state_blobs->volatil);
+ tpm_sized_buffer_reset(&state_blobs->permanent);
+ tpm_sized_buffer_reset(&state_blobs->savestate);
+
+ return -1;
+}
+
+/*
+ * Transfer a TPM state blob to the TPM emulator.
+ *
+ * @tpm_emu: TPMEmulator
+ * @type: the type of TPM state blob to transfer
+ * @tsb: TPMSizedBuffer containing the TPM state blob
+ * @flags: Flags describing the (encryption) state of the TPM state blob
+ */
+static int tpm_emulator_set_state_blob(TPMEmulator *tpm_emu,
+ uint32_t type,
+ TPMSizedBuffer *tsb,
+ uint32_t flags)
+{
+ ssize_t n;
+ ptm_setstate pss;
+ ptm_res tpm_result;
+
+ if (tsb->size == 0) {
+ return 0;
+ }
+
+ pss = (ptm_setstate) {
+ .u.req.state_flags = cpu_to_be32(flags),
+ .u.req.type = cpu_to_be32(type),
+ .u.req.length = cpu_to_be32(tsb->size),
+ };
+
+ /* write the header only */
+ if (tpm_emulator_ctrlcmd(tpm_emu, CMD_SET_STATEBLOB, &pss,
+ offsetof(ptm_setstate, u.req.data), 0) < 0) {
+ error_report("tpm-emulator: could not set state blob type %d : %s",
+ type, strerror(errno));
+ return -1;
+ }
+
+ /* now the body */
+ n = qemu_chr_fe_write_all(&tpm_emu->ctrl_chr, tsb->buffer, tsb->size);
+ if (n != tsb->size) {
+ error_report("tpm-emulator: Writing the stateblob (type %d) "
+ "failed; could not write %u bytes, but only %zd",
+ type, tsb->size, n);
+ return -1;
+ }
+
+ /* now get the result */
+ n = qemu_chr_fe_read_all(&tpm_emu->ctrl_chr,
+ (uint8_t *)&pss, sizeof(pss.u.resp));
+ if (n != sizeof(pss.u.resp)) {
+ error_report("tpm-emulator: Reading response from writing stateblob "
+ "(type %d) failed; expected %zu bytes, got %zd", type,
+ sizeof(pss.u.resp), n);
+ return -1;
+ }
+
+ tpm_result = be32_to_cpu(pss.u.resp.tpm_result);
+ if (tpm_result != 0) {
+ error_report("tpm-emulator: Setting the stateblob (type %d) failed "
+ "with a TPM error 0x%x", type, tpm_result);
+ return -1;
+ }
+
+ trace_tpm_emulator_set_state_blob(type, tsb->size, flags);
+
+ return 0;
+}
+
+/*
+ * Set all the TPM state blobs.
+ *
+ * Returns a negative errno code in case of error.
+ */
+static int tpm_emulator_set_state_blobs(TPMBackend *tb)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ TPMBlobBuffers *state_blobs = &tpm_emu->state_blobs;
+
+ trace_tpm_emulator_set_state_blobs();
+
+ if (tpm_emulator_stop_tpm(tb) < 0) {
+ trace_tpm_emulator_set_state_blobs_error("Could not stop TPM");
+ return -EIO;
+ }
+
+ if (tpm_emulator_set_state_blob(tpm_emu, PTM_BLOB_TYPE_PERMANENT,
+ &state_blobs->permanent,
+ state_blobs->permanent_flags) < 0 ||
+ tpm_emulator_set_state_blob(tpm_emu, PTM_BLOB_TYPE_VOLATILE,
+ &state_blobs->volatil,
+ state_blobs->volatil_flags) < 0 ||
+ tpm_emulator_set_state_blob(tpm_emu, PTM_BLOB_TYPE_SAVESTATE,
+ &state_blobs->savestate,
+ state_blobs->savestate_flags) < 0) {
+ return -EBADMSG;
+ }
+
+ trace_tpm_emulator_set_state_blobs_done();
+
+ return 0;
+}
+
+static int tpm_emulator_pre_save(void *opaque)
+{
+ TPMBackend *tb = opaque;
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+
+ trace_tpm_emulator_pre_save();
+
+ tpm_backend_finish_sync(tb);
+
+ /* get the state blobs from the TPM */
+ return tpm_emulator_get_state_blobs(tpm_emu);
+}
+
+/*
+ * Load the TPM state blobs into the TPM.
+ *
+ * Returns negative errno codes in case of error.
+ */
+static int tpm_emulator_post_load(void *opaque, int version_id)
+{
+ TPMBackend *tb = opaque;
+ int ret;
+
+ ret = tpm_emulator_set_state_blobs(tb);
+ if (ret < 0) {
+ return ret;
+ }
+
+ if (tpm_emulator_startup_tpm_resume(tb, 0, true) < 0) {
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const VMStateDescription vmstate_tpm_emulator = {
+ .name = "tpm-emulator",
+ .version_id = 1,
+ .pre_save = tpm_emulator_pre_save,
+ .post_load = tpm_emulator_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(state_blobs.permanent_flags, TPMEmulator),
+ VMSTATE_UINT32(state_blobs.permanent.size, TPMEmulator),
+ VMSTATE_VBUFFER_ALLOC_UINT32(state_blobs.permanent.buffer,
+ TPMEmulator, 1, 0,
+ state_blobs.permanent.size),
+
+ VMSTATE_UINT32(state_blobs.volatil_flags, TPMEmulator),
+ VMSTATE_UINT32(state_blobs.volatil.size, TPMEmulator),
+ VMSTATE_VBUFFER_ALLOC_UINT32(state_blobs.volatil.buffer,
+ TPMEmulator, 1, 0,
+ state_blobs.volatil.size),
+
+ VMSTATE_UINT32(state_blobs.savestate_flags, TPMEmulator),
+ VMSTATE_UINT32(state_blobs.savestate.size, TPMEmulator),
+ VMSTATE_VBUFFER_ALLOC_UINT32(state_blobs.savestate.buffer,
+ TPMEmulator, 1, 0,
+ state_blobs.savestate.size),
+
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void tpm_emulator_inst_init(Object *obj)
{
TPMEmulator *tpm_emu = TPM_EMULATOR(obj);
@@ -579,6 +871,8 @@ static void tpm_emulator_inst_init(Object *obj)
tpm_emu->options = g_new0(TPMEmulatorOptions, 1);
tpm_emu->cur_locty_number = ~0;
qemu_mutex_init(&tpm_emu->mutex);
+
+ vmstate_register(NULL, -1, &vmstate_tpm_emulator, obj);
}
/*
@@ -615,6 +909,8 @@ static void tpm_emulator_inst_finalize(Object *obj)
}
qemu_mutex_destroy(&tpm_emu->mutex);
+
+ vmstate_unregister(NULL, &vmstate_tpm_emulator, obj);
}
static void tpm_emulator_class_init(ObjectClass *klass, void *data)
diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events
index 9a65384..c5bfbf1 100644
--- a/hw/tpm/trace-events
+++ b/hw/tpm/trace-events
@@ -20,13 +20,19 @@ tpm_emulator_set_locality(uint8_t locty) "setting locality to %d"
tpm_emulator_handle_request(void) "processing TPM command"
tpm_emulator_probe_caps(uint64_t caps) "capabilities: 0x%"PRIx64
tpm_emulator_set_buffer_size(uint32_t buffersize, uint32_t minsize, uint32_t maxsize) "buffer size: %u, min: %u, max: %u"
-tpm_emulator_startup_tpm(void) "startup"
+tpm_emulator_startup_tpm_resume(bool is_resume, size_t buffersize) "is_resume: %d, buffer size: %zu"
tpm_emulator_get_tpm_established_flag(uint8_t flag) "got established flag: %d"
tpm_emulator_cancel_cmd_not_supt(void) "Backend does not support CANCEL_TPM_CMD"
tpm_emulator_handle_device_opts_tpm12(void) "TPM Version 1.2"
tpm_emulator_handle_device_opts_tpm2(void) "TPM Version 2"
tpm_emulator_handle_device_opts_unspec(void) "TPM Version Unspecified"
tpm_emulator_handle_device_opts_startup_error(void) "Startup error"
+tpm_emulator_get_state_blob(uint8_t type, uint32_t size, uint32_t flags) "got state blob type %d, %u bytes, flags 0x%08x"
+tpm_emulator_set_state_blob(uint8_t type, uint32_t size, uint32_t flags) "set state blob type %d, %u bytes, flags 0x%08x"
+tpm_emulator_set_state_blobs(void) "setting state blobs"
+tpm_emulator_set_state_blobs_error(const char *msg) "error while setting state blobs: %s"
+tpm_emulator_set_state_blobs_done(void) "Done setting state blobs"
+tpm_emulator_pre_save(void) ""
tpm_emulator_inst_init(void) ""
# hw/tpm/tpm_tis.c
--
2.5.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v5 for 2.13 2/4] tpm: extend TPM TIS with state migration support
2018-03-16 21:46 [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 1/4] tpm: extend TPM emulator " Stefan Berger
@ 2018-03-16 21:46 ` Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide Stefan Berger
` (2 subsequent siblings)
4 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-03-16 21:46 UTC (permalink / raw)
To: qemu-devel; +Cc: dgilbert, marcandre.lureau, Stefan Berger
Extend the TPM TIS interface with state migration support.
We need to synchronize with the backend thread to make sure that a command
being processed by the external TPM emulator has completed and its
response been received.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
hw/tpm/tpm_tis.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++--
hw/tpm/trace-events | 1 +
2 files changed, 51 insertions(+), 2 deletions(-)
diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c
index 2ac7e74..fec3d73 100644
--- a/hw/tpm/tpm_tis.c
+++ b/hw/tpm/tpm_tis.c
@@ -894,9 +894,57 @@ static void tpm_tis_reset(DeviceState *dev)
tpm_backend_startup_tpm(s->be_driver, s->be_buffer_size);
}
+/* persistent state handling */
+
+static int tpm_tis_pre_save(void *opaque)
+{
+ TPMState *s = opaque;
+ uint8_t locty = s->active_locty;
+
+ trace_tpm_tis_pre_save(locty, s->rw_offset);
+
+ if (DEBUG_TIS) {
+ tpm_tis_dump_state(opaque, 0);
+ }
+
+ /*
+ * Synchronize with backend completion.
+ */
+ tpm_backend_finish_sync(s->be_driver);
+
+ return 0;
+}
+
+static const VMStateDescription vmstate_locty = {
+ .name = "tpm-tis/locty",
+ .version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(state, TPMLocality),
+ VMSTATE_UINT32(inte, TPMLocality),
+ VMSTATE_UINT32(ints, TPMLocality),
+ VMSTATE_UINT8(access, TPMLocality),
+ VMSTATE_UINT32(sts, TPMLocality),
+ VMSTATE_UINT32(iface_id, TPMLocality),
+ VMSTATE_END_OF_LIST(),
+ }
+};
+
static const VMStateDescription vmstate_tpm_tis = {
- .name = "tpm",
- .unmigratable = 1,
+ .name = "tpm-tis",
+ .version_id = 1,
+ .pre_save = tpm_tis_pre_save,
+ .fields = (VMStateField[]) {
+ VMSTATE_BUFFER(buffer, TPMState),
+ VMSTATE_UINT16(rw_offset, TPMState),
+ VMSTATE_UINT8(active_locty, TPMState),
+ VMSTATE_UINT8(aborting_locty, TPMState),
+ VMSTATE_UINT8(next_locty, TPMState),
+
+ VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1,
+ vmstate_locty, TPMLocality),
+
+ VMSTATE_END_OF_LIST()
+ }
};
static Property tpm_tis_properties[] = {
diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events
index c5bfbf1..25bee0c 100644
--- a/hw/tpm/trace-events
+++ b/hw/tpm/trace-events
@@ -50,3 +50,4 @@ tpm_tis_mmio_write_locty_seized(uint8_t locty, uint8_t active) "Locality %d seiz
tpm_tis_mmio_write_init_abort(void) "Initiating abort"
tpm_tis_mmio_write_lowering_irq(void) "Lowering IRQ"
tpm_tis_mmio_write_data2send(uint32_t value, unsigned size) "Data to send to TPM: 0x%08x (size=%d)"
+tpm_tis_pre_save(uint8_t locty, uint32_t rw_offset) "locty: %d, rw_offset = %u"
--
2.5.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide
2018-03-16 21:46 [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 1/4] tpm: extend TPM emulator " Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 2/4] tpm: extend TPM TIS " Stefan Berger
@ 2018-03-16 21:46 ` Stefan Berger
2018-03-28 15:48 ` Marc-André Lureau
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 4/4] tpm: Add test cases that uses the external swtpm with CRB interface Stefan Berger
2018-03-16 22:00 ` [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support no-reply
4 siblings, 1 reply; 10+ messages in thread
From: Stefan Berger @ 2018-03-16 21:46 UTC (permalink / raw)
To: qemu-devel; +Cc: dgilbert, marcandre.lureau, Stefan Berger
Extend the docs related to TPM with specs related to VM save and
restore and a troubleshooting guide for TPM migration.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
docs/specs/tpm.txt | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
index d1d7157..c230c4c 100644
--- a/docs/specs/tpm.txt
+++ b/docs/specs/tpm.txt
@@ -200,3 +200,109 @@ crw-------. 1 root root 10, 224 Jul 11 10:11 /dev/tpm0
PCR-00: 35 4E 3B CE 23 9F 38 59 ...
...
PCR-23: 00 00 00 00 00 00 00 00 ...
+
+
+=== Migration with the TPM emulator ===
+
+The TPM emulator supports the following types of virtual machine migration:
+
+- VM save / restore (migration into a file)
+- Network migration
+- Snapshotting (migration into storage like QoW2 or QED)
+
+The following command sequences can be used to test VM save / restore.
+
+
+In a 1st terminal start an instance of a swtpm using the following command:
+
+mkdir /tmp/mytpm1
+swtpm socket --tpmstate dir=/tmp/mytpm1 \
+ --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
+ --log level=20 --tpm2
+
+In a 2nd terminal start the VM:
+
+qemu-system-x86_64 -display sdl -enable-kvm \
+ -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
+ -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
+ -tpmdev emulator,id=tpm0,chardev=chrtpm \
+ -device tpm-tis,tpmdev=tpm0 \
+ -monitor stdio \
+ test.img
+
+Verify that the attached TPM is working as expected using applications inside
+the VM.
+
+To store the state of the VM use the following command in the QEMU monitor in
+the 2nd terminal:
+
+(qemu) migrate "exec:cat > testvm.bin"
+(qemu) quit
+
+At this point a file called 'testvm.bin' should exists and the swtpm and QEMU
+processes should have ended.
+
+To test 'VM restore' you have to start the swtpm with the same parameters
+as before. If previously a TPM 2 [--tpm2] was saved, --tpm2 must now be
+passed again on the command line.
+
+In the 1st terminal restart the swtpm with the same command line as before:
+
+swtpm socket --tpmstate dir=/tmp/mytpm1 \
+ --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
+ --log level=20 --tpm2
+
+In the 2nd terminal restore the state of the VM using the additonal
+'-incoming' option.
+
+qemu-system-x86_64 -display sdl -enable-kvm \
+ -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
+ -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
+ -tpmdev emulator,id=tpm0,chardev=chrtpm \
+ -device tpm-tis,tpmdev=tpm0 \
+ -incoming "exec:cat < testvm.bin" \
+ test.img
+
+
+Troubleshooting migration:
+
+There are several reasons why migration may fail. In case of problems,
+please ensure that the command lines adhere to the following rules and,
+if possible, that identical versions of QEMU and swtpm are used at all
+times.
+
+VM save and restore:
+ - QEMU command line parameters should be identical apart from the
+ '-incoming' option on VM restore
+ - swtpm command line parameters should be identical
+
+VM migration to 'localhost':
+ - QEMU command line parameters should be identical apart from the
+ '-incoming' option on the destination side
+ - swtpm command line parameters should point to two different
+ directories on the source and destination swtpm (--tpmstate dir=...)
+ (especially if different versions of libtpms were to be used on the
+ same machine).
+
+VM migration across the network:
+ - QEMU command line parameters should be identical apart from the
+ '-incoming' option on the destination side
+ - swtpm command line parameters should be identical
+
+VM Snapshotting:
+ - QEMU command line parameters should be identical
+ - swtpm command line parameters should be identical
+
+
+Besides that, migration failure reasons on the swtpm level may include
+the following:
+
+ - the versions of the swtpm on the source and destination sides are
+ incompatible
+ - downgrading of TPM state may not be supported
+ - the source and destination libtpms were compiled with different
+ compile-time options and the destination side refuses to accept the
+ state
+ - different migration keys are used on the source and destination side
+ and the destination side cannot decrypt the migrated state
+ (swtpm ... --migration-key ... )
--
2.5.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v5 for 2.13 4/4] tpm: Add test cases that uses the external swtpm with CRB interface
2018-03-16 21:46 [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support Stefan Berger
` (2 preceding siblings ...)
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide Stefan Berger
@ 2018-03-16 21:46 ` Stefan Berger
2018-03-16 22:00 ` [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support no-reply
4 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-03-16 21:46 UTC (permalink / raw)
To: qemu-devel; +Cc: dgilbert, marcandre.lureau, Stefan Berger
Add a test program for testing the CRB with the external swtpm.
The 1st test case extends a PCR and reads back the value and compares
it against an expected return packet.
The 2nd test case repeats the 1st test case and then migrates the
external swtpm's state along with the VM state to a destination
QEMU and swtpm and checks that the PCR has the expected value now.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
tests/Makefile.include | 3 +
tests/tpm-crb-swtpm-test.c | 243 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 246 insertions(+)
create mode 100644 tests/tpm-crb-swtpm-test.c
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 42fd426..bd4f56f 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -297,6 +297,7 @@ check-qtest-i386-$(CONFIG_VHOST_USER_NET_TEST_i386) += tests/vhost-user-test$(EX
ifeq ($(CONFIG_VHOST_USER_NET_TEST_i386),)
check-qtest-x86_64-$(CONFIG_VHOST_USER_NET_TEST_x86_64) += tests/vhost-user-test$(EXESUF)
endif
+check-qtest-i386-$(CONFIG_TPM) += tests/tpm-crb-swtpm-test$(EXESUF)
check-qtest-i386-$(CONFIG_TPM) += tests/tpm-crb-test$(EXESUF)
check-qtest-i386-$(CONFIG_TPM) += tests/tpm-tis-test$(EXESUF)
check-qtest-i386-$(CONFIG_SLIRP) += tests/test-netfilter$(EXESUF)
@@ -719,6 +720,8 @@ tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
+tests/tpm-crb-swtpm-test$(EXESUF): tests/tpm-crb-swtpm-test.o tests/tpm-emu.o \
+ tests/tpm-util.o $(test-io-obj-y)
tests/tpm-crb-test$(EXESUF): tests/tpm-crb-test.o tests/tpm-emu.o $(test-io-obj-y)
tests/tpm-tis-test$(EXESUF): tests/tpm-tis-test.o tests/tpm-emu.o $(test-io-obj-y)
tests/test-io-channel-file$(EXESUF): tests/test-io-channel-file.o \
diff --git a/tests/tpm-crb-swtpm-test.c b/tests/tpm-crb-swtpm-test.c
new file mode 100644
index 0000000..844d52d
--- /dev/null
+++ b/tests/tpm-crb-swtpm-test.c
@@ -0,0 +1,243 @@
+/*
+ * QTest testcase for TPM CRB talking to external swtpm and swtpm migration
+ *
+ * Copyright (c) 2018 IBM Corporation
+ * with parts borrowed from migration-test.c that is:
+ * Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates
+ *
+ * Authors:
+ * Stefan Berger <stefanb@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include <glib/gstdio.h>
+
+#include "hw/acpi/tpm.h"
+#include "io/channel-socket.h"
+#include "libqtest.h"
+#include "tpm-util.h"
+#include "sysemu/tpm.h"
+#include "qapi/qmp/qdict.h"
+
+typedef struct TestState {
+ char *src_tpm_path;
+ char *dst_tpm_path;
+ char *uri;
+} TestState;
+
+bool got_stop;
+
+static void migrate(QTestState *who, const char *uri)
+{
+ QDict *rsp;
+ gchar *cmd;
+
+ cmd = g_strdup_printf("{ 'execute': 'migrate',"
+ "'arguments': { 'uri': '%s' } }",
+ uri);
+ rsp = qtest_qmp(who, cmd);
+ g_free(cmd);
+ g_assert(qdict_haskey(rsp, "return"));
+ QDECREF(rsp);
+}
+
+/*
+ * Events can get in the way of responses we are actually waiting for.
+ */
+static QDict *wait_command(QTestState *who, const char *command)
+{
+ const char *event_string;
+ QDict *response;
+
+ response = qtest_qmp(who, command);
+
+ while (qdict_haskey(response, "event")) {
+ /* OK, it was an event */
+ event_string = qdict_get_str(response, "event");
+ if (!strcmp(event_string, "STOP")) {
+ got_stop = true;
+ }
+ QDECREF(response);
+ response = qtest_qmp_receive(who);
+ }
+ return response;
+}
+
+static void wait_for_migration_complete(QTestState *who)
+{
+ while (true) {
+ QDict *rsp, *rsp_return;
+ bool completed;
+ const char *status;
+
+ rsp = wait_command(who, "{ 'execute': 'query-migrate' }");
+ rsp_return = qdict_get_qdict(rsp, "return");
+ status = qdict_get_str(rsp_return, "status");
+ completed = strcmp(status, "completed") == 0;
+ g_assert_cmpstr(status, !=, "failed");
+ QDECREF(rsp);
+ if (completed) {
+ return;
+ }
+ usleep(1000);
+ }
+}
+
+static void migration_start_qemu(QTestState **src_qemu, QTestState **dst_qemu,
+ SocketAddress *src_tpm_addr,
+ SocketAddress *dst_tpm_addr,
+ const char *miguri)
+{
+ char *src_qemu_args, *dst_qemu_args;
+
+ src_qemu_args = g_strdup_printf(
+ "-chardev socket,id=chr,path=%s "
+ "-tpmdev emulator,id=dev,chardev=chr "
+ "-device tpm-crb,tpmdev=dev ",
+ src_tpm_addr->u.q_unix.path);
+
+ *src_qemu = qtest_init(src_qemu_args);
+
+ dst_qemu_args = g_strdup_printf(
+ "-chardev socket,id=chr,path=%s "
+ "-tpmdev emulator,id=dev,chardev=chr "
+ "-device tpm-crb,tpmdev=dev "
+ "-incoming %s",
+ dst_tpm_addr->u.q_unix.path,
+ miguri);
+
+ *dst_qemu = qtest_init(dst_qemu_args);
+
+ free(src_qemu_args);
+ free(dst_qemu_args);
+}
+static void tpm_crb_swtpm_test(const void *data)
+{
+ char *args = NULL;
+ QTestState *s;
+ SocketAddress *addr = NULL;
+ gboolean succ;
+ GPid swtpm_pid;
+ GError *error = NULL;
+ const TestState *ts = data;
+
+ succ = tpm_util_swtpm_start(ts->src_tpm_path, &swtpm_pid, &addr, &error);
+ if (!succ) {
+ return;
+ }
+
+ args = g_strdup_printf(
+ "-chardev socket,id=chr,path=%s "
+ "-tpmdev emulator,id=dev,chardev=chr "
+ "-device tpm-crb,tpmdev=dev",
+ addr->u.q_unix.path);
+
+ s = qtest_start(args);
+
+ tpm_util_startup(s, tpm_util_crb_transfer);
+ tpm_util_pcrextend(s, tpm_util_crb_transfer);
+
+ unsigned char tpm_pcrread_resp[] =
+ "\x80\x01\x00\x00\x00\x3e\x00\x00\x00\x00\x00\x00\x00\x16\x00\x00"
+ "\x00\x01\x00\x0b\x03\x00\x04\x00\x00\x00\x00\x01\x00\x20\xf6\x85"
+ "\x98\xe5\x86\x8d\xe6\x8b\x97\x29\x99\x60\xf2\x71\x7d\x17\x67\x89"
+ "\xa4\x2f\x9a\xae\xa8\xc7\xb7\xaa\x79\xa8\x62\x56\xc1\xde";
+ tpm_util_pcrread(s, tpm_util_crb_transfer, tpm_pcrread_resp,
+ sizeof(tpm_pcrread_resp));
+
+ qtest_end();
+ tpm_util_swtpm_kill(swtpm_pid);
+
+ if (addr) {
+ g_unlink(addr->u.q_unix.path);
+ qapi_free_SocketAddress(addr);
+ }
+}
+
+static void tpm_crb_swtpm_migration_test(const void *data)
+{
+ const TestState *ts = data;
+ gboolean succ;
+ GPid src_tpm_pid, dst_tpm_pid;
+ SocketAddress *src_tpm_addr = NULL, *dst_tpm_addr = NULL;
+ GError *error = NULL;
+ QTestState *src_qemu, *dst_qemu;
+
+ succ = tpm_util_swtpm_start(ts->src_tpm_path, &src_tpm_pid,
+ &src_tpm_addr, &error);
+ g_assert_cmpint(succ, !=, false);
+ if (!succ) {
+ return;
+ }
+
+ succ = tpm_util_swtpm_start(ts->dst_tpm_path, &dst_tpm_pid,
+ &dst_tpm_addr, &error);
+ g_assert_cmpint(succ, !=, false);
+ if (!succ) {
+ goto err_src_tpm_kill;
+ }
+
+ migration_start_qemu(&src_qemu, &dst_qemu, src_tpm_addr, dst_tpm_addr,
+ ts->uri);
+
+ tpm_util_startup(src_qemu, tpm_util_crb_transfer);
+ tpm_util_pcrextend(src_qemu, tpm_util_crb_transfer);
+
+ unsigned char tpm_pcrread_resp[] =
+ "\x80\x01\x00\x00\x00\x3e\x00\x00\x00\x00\x00\x00\x00\x16\x00\x00"
+ "\x00\x01\x00\x0b\x03\x00\x04\x00\x00\x00\x00\x01\x00\x20\xf6\x85"
+ "\x98\xe5\x86\x8d\xe6\x8b\x97\x29\x99\x60\xf2\x71\x7d\x17\x67\x89"
+ "\xa4\x2f\x9a\xae\xa8\xc7\xb7\xaa\x79\xa8\x62\x56\xc1\xde";
+ tpm_util_pcrread(src_qemu, tpm_util_crb_transfer, tpm_pcrread_resp,
+ sizeof(tpm_pcrread_resp));
+
+ migrate(src_qemu, ts->uri);
+ wait_for_migration_complete(src_qemu);
+
+ tpm_util_pcrread(dst_qemu, tpm_util_crb_transfer, tpm_pcrread_resp,
+ sizeof(tpm_pcrread_resp));
+
+ qtest_quit(dst_qemu);
+ qtest_quit(src_qemu);
+
+ tpm_util_swtpm_kill(dst_tpm_pid);
+ if (dst_tpm_addr) {
+ g_unlink(dst_tpm_addr->u.q_unix.path);
+ qapi_free_SocketAddress(dst_tpm_addr);
+ }
+
+err_src_tpm_kill:
+ tpm_util_swtpm_kill(src_tpm_pid);
+ if (src_tpm_addr) {
+ g_unlink(src_tpm_addr->u.q_unix.path);
+ qapi_free_SocketAddress(src_tpm_addr);
+ }
+}
+
+int main(int argc, char **argv)
+{
+ int ret;
+ TestState ts = { 0 };
+
+ ts.src_tpm_path = g_dir_make_tmp("qemu-tpm-crb-swtpm-test.XXXXXX", NULL);
+ ts.dst_tpm_path = g_dir_make_tmp("qemu-tpm-crb-swtpm-test.XXXXXX", NULL);
+ ts.uri = g_strdup_printf("unix:%s/migsocket", ts.src_tpm_path);
+
+ module_call_init(MODULE_INIT_QOM);
+ g_test_init(&argc, &argv, NULL);
+
+ qtest_add_data_func("/tpm/crb-swtpm/test", &ts, tpm_crb_swtpm_test);
+ qtest_add_data_func("/tpm/crb-swtpm-migration/test", &ts,
+ tpm_crb_swtpm_migration_test);
+ ret = g_test_run();
+
+ g_rmdir(ts.dst_tpm_path);
+ g_free(ts.dst_tpm_path);
+ g_rmdir(ts.src_tpm_path);
+ g_free(ts.src_tpm_path);
+
+ return ret;
+}
--
2.5.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support
2018-03-16 21:46 [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support Stefan Berger
` (3 preceding siblings ...)
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 4/4] tpm: Add test cases that uses the external swtpm with CRB interface Stefan Berger
@ 2018-03-16 22:00 ` no-reply
2018-03-16 23:26 ` Stefan Berger
4 siblings, 1 reply; 10+ messages in thread
From: no-reply @ 2018-03-16 22:00 UTC (permalink / raw)
To: stefanb; +Cc: famz, qemu-devel, marcandre.lureau, dgilbert
Hi,
This series failed docker-quick@centos6 build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
Type: series
Message-id: 1521236796-24551-1-git-send-email-stefanb@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
set -e
git submodule update --init dtc
# Let docker tests dump environment info
export SHOW_ENV=1
export J=8
time make docker-test-quick@centos6
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
f39c7d70de tpm: Add test cases that uses the external swtpm with CRB interface
5470ab132a docs: tpm: add VM save/restore example and troubleshooting guide
3b2114b4e6 tpm: extend TPM TIS with state migration support
59c9b53eea tpm: extend TPM emulator with state migration support
=== OUTPUT BEGIN ===
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-3rs5i4es/src/dtc'...
Submodule path 'dtc': checked out 'e54388015af1fb4bf04d0bca99caba1074d9cc42'
BUILD centos6
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-3rs5i4es/src'
GEN /var/tmp/patchew-tester-tmp-3rs5i4es/src/docker-src.2018-03-16-17.58.14.29948/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-3rs5i4es/src/docker-src.2018-03-16-17.58.14.29948/qemu.tar.vroot'...
done.
Checking out files: 46% (2780/6030)
Checking out files: 47% (2835/6030)
Checking out files: 48% (2895/6030)
Checking out files: 49% (2955/6030)
Checking out files: 50% (3015/6030)
Checking out files: 51% (3076/6030)
Checking out files: 52% (3136/6030)
Checking out files: 53% (3196/6030)
Checking out files: 54% (3257/6030)
Checking out files: 55% (3317/6030)
Checking out files: 56% (3377/6030)
Checking out files: 57% (3438/6030)
Checking out files: 58% (3498/6030)
Checking out files: 59% (3558/6030)
Checking out files: 60% (3618/6030)
Checking out files: 61% (3679/6030)
Checking out files: 62% (3739/6030)
Checking out files: 63% (3799/6030)
Checking out files: 64% (3860/6030)
Checking out files: 65% (3920/6030)
Checking out files: 66% (3980/6030)
Checking out files: 67% (4041/6030)
Checking out files: 68% (4101/6030)
Checking out files: 69% (4161/6030)
Checking out files: 70% (4221/6030)
Checking out files: 71% (4282/6030)
Checking out files: 72% (4342/6030)
Checking out files: 73% (4402/6030)
Checking out files: 74% (4463/6030)
Checking out files: 75% (4523/6030)
Checking out files: 76% (4583/6030)
Checking out files: 77% (4644/6030)
Checking out files: 78% (4704/6030)
Checking out files: 79% (4764/6030)
Checking out files: 80% (4824/6030)
Checking out files: 81% (4885/6030)
Checking out files: 82% (4945/6030)
Checking out files: 83% (5005/6030)
Checking out files: 84% (5066/6030)
Checking out files: 85% (5126/6030)
Checking out files: 86% (5186/6030)
Checking out files: 87% (5247/6030)
Checking out files: 88% (5307/6030)
Checking out files: 89% (5367/6030)
Checking out files: 90% (5427/6030)
Checking out files: 91% (5488/6030)
Checking out files: 92% (5548/6030)
Checking out files: 93% (5608/6030)
Checking out files: 94% (5669/6030)
Checking out files: 95% (5729/6030)
Checking out files: 96% (5789/6030)
Checking out files: 97% (5850/6030)
Checking out files: 98% (5910/6030)
Checking out files: 99% (5970/6030)
Checking out files: 100% (6030/6030)
Checking out files: 100% (6030/6030), done.
Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-3rs5i4es/src/docker-src.2018-03-16-17.58.14.29948/qemu.tar.vroot/dtc'...
Submodule path 'dtc': checked out 'e54388015af1fb4bf04d0bca99caba1074d9cc42'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into '/var/tmp/patchew-tester-tmp-3rs5i4es/src/docker-src.2018-03-16-17.58.14.29948/qemu.tar.vroot/ui/keycodemapdb'...
Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
COPY RUNNER
RUN test-quick in qemu:centos6
Packages installed:
SDL-devel-1.2.14-7.el6_7.1.x86_64
bison-2.4.1-5.el6.x86_64
bzip2-devel-1.0.5-7.el6_0.x86_64
ccache-3.1.6-2.el6.x86_64
csnappy-devel-0-6.20150729gitd7bc683.el6.x86_64
flex-2.5.35-9.el6.x86_64
gcc-4.4.7-18.el6.x86_64
gettext-0.17-18.el6.x86_64
git-1.7.1-9.el6_9.x86_64
glib2-devel-2.28.8-9.el6.x86_64
libepoxy-devel-1.2-3.el6.x86_64
libfdt-devel-1.4.0-1.el6.x86_64
librdmacm-devel-1.0.21-0.el6.x86_64
lzo-devel-2.03-3.1.el6_5.1.x86_64
make-3.81-23.el6.x86_64
mesa-libEGL-devel-11.0.7-4.el6.x86_64
mesa-libgbm-devel-11.0.7-4.el6.x86_64
package g++ is not installed
pixman-devel-0.32.8-1.el6.x86_64
spice-glib-devel-0.26-8.el6.x86_64
spice-server-devel-0.12.4-16.el6.x86_64
tar-1.23-15.el6_8.x86_64
vte-devel-0.25.1-9.el6.x86_64
xen-devel-4.6.6-2.el6.x86_64
zlib-devel-1.2.3-29.el6.x86_64
Environment variables:
PACKAGES=bison bzip2-devel ccache csnappy-devel flex g++ gcc gettext git glib2-devel libepoxy-devel libfdt-devel librdmacm-devel lzo-devel make mesa-libEGL-devel mesa-libgbm-devel pixman-devel SDL-devel spice-glib-devel spice-server-devel tar vte-devel xen-devel zlib-devel
HOSTNAME=0799106b761f
MAKEFLAGS= -j8
J=8
CCACHE_DIR=/var/tmp/ccache
EXTRA_CONFIGURE_OPTS=
V=
SHOW_ENV=1
PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PWD=/
TARGET_LIST=
SHLVL=1
HOME=/root
TEST_DIR=/tmp/qemu-test
FEATURES= dtc
DEBUG=
_=/usr/bin/env
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install
No C++ compiler available; disabling C++ specific optional code
Install prefix /tmp/qemu-test/install
BIOS directory /tmp/qemu-test/install/share/qemu
firmware path /tmp/qemu-test/install/share/qemu-firmware
binary directory /tmp/qemu-test/install/bin
library directory /tmp/qemu-test/install/lib
module directory /tmp/qemu-test/install/lib/qemu
libexec directory /tmp/qemu-test/install/libexec
include directory /tmp/qemu-test/install/include
config directory /tmp/qemu-test/install/etc
local state directory /tmp/qemu-test/install/var
Manual directory /tmp/qemu-test/install/share/man
ELF interp prefix /usr/gnemul/qemu-%M
Source path /tmp/qemu-test/src
GIT binary git
GIT submodules
C compiler cc
Host C compiler cc
C++ compiler
Objective-C compiler cc
ARFLAGS rv
CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
QEMU_CFLAGS -I/usr/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fPIE -DPIE -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wendif-labels -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-all -Wno-missing-braces -I/usr/include/libpng12 -I/usr/include/libdrm -I/usr/include/spice-server -I/usr/include/cacard -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/nss3 -I/usr/include/nspr4 -I/usr/include/spice-1
LDFLAGS -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -pie -m64 -g
make make
install install
python python -B
smbd /usr/sbin/smbd
module support no
host CPU x86_64
host big endian no
target list x86_64-softmmu aarch64-softmmu
gprof enabled no
sparse enabled no
strip binaries yes
profiler no
static build no
SDL support yes (1.2.14)
GTK support yes (2.24.23)
GTK GL support no
VTE support yes (0.25.1)
TLS priority NORMAL
GNUTLS support no
GNUTLS rnd no
libgcrypt no
libgcrypt kdf no
nettle no
nettle kdf no
libtasn1 no
curses support yes
virgl support no
curl support no
mingw32 support no
Audio drivers oss
Block whitelist (rw)
Block whitelist (ro)
VirtFS support no
Multipath support no
VNC support yes
VNC SASL support no
VNC JPEG support yes
VNC PNG support yes
xen support yes
xen ctrl version 40600
pv dom build no
brlapi support no
bluez support no
Documentation no
PIE yes
vde support no
netmap support no
Linux AIO support no
ATTR/XATTR support yes
Install blobs yes
KVM support yes
HAX support no
HVF support no
WHPX support no
TCG support yes
TCG debug enabled no
TCG interpreter no
malloc trim support yes
RDMA support no
fdt support yes
membarrier no
preadv support yes
fdatasync yes
madvise yes
posix_madvise yes
posix_memalign yes
libcap-ng support no
vhost-net support yes
vhost-crypto support yes
vhost-scsi support yes
vhost-vsock support yes
vhost-user support yes
Trace backends log
spice support yes (0.12.6/0.12.4)
rbd support no
xfsctl support no
smartcard support yes
libusb no
usb net redir no
OpenGL support yes
OpenGL dmabufs no
libiscsi support no
libnfs support no
build guest agent yes
QGA VSS support no
QGA w32 disk info no
QGA MSI support no
seccomp support no
coroutine backend ucontext
coroutine pool yes
debug stack usage no
crypto afalg no
GlusterFS support no
gcov gcov
gcov enabled no
TPM support yes
libssh2 support no
TPM passthrough yes
TPM emulator yes
QOM debugging yes
Live block migration yes
lzo support yes
snappy support no
bzip2 support yes
NUMA host support no
libxml2 no
tcmalloc support no
jemalloc support no
avx2 optimization no
replication support yes
VxHS block device no
capstone no
WARNING: Use of GTK 2.0 is deprecated and will be removed in
WARNING: future releases. Please switch to using GTK 3.0
WARNING: Use of SDL 1.2 is deprecated and will be removed in
WARNING: future releases. Please switch to using SDL 2.0
mkdir -p dtc/libfdt
GEN x86_64-softmmu/config-devices.mak.tmp
GEN aarch64-softmmu/config-devices.mak.tmp
mkdir -p dtc/tests
GEN config-host.h
GEN qemu-options.def
GEN qapi-gen
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN x86_64-softmmu/config-devices.mak
GEN aarch64-softmmu/config-devices.mak
GEN module_block.h
GEN ui/input-keymap-atset1-to-qcode.c
GEN ui/input-keymap-linux-to-qcode.c
GEN ui/input-keymap-qcode-to-atset1.c
GEN ui/input-keymap-qcode-to-atset2.c
GEN ui/input-keymap-qcode-to-atset3.c
GEN ui/input-keymap-qcode-to-linux.c
GEN ui/input-keymap-qcode-to-qnum.c
GEN ui/input-keymap-qcode-to-sun.c
GEN ui/input-keymap-qnum-to-qcode.c
GEN ui/input-keymap-usb-to-qcode.c
GEN ui/input-keymap-win32-to-qcode.c
GEN ui/input-keymap-x11-to-qcode.c
GEN ui/input-keymap-xorgevdev-to-qcode.c
GEN ui/input-keymap-xorgkbd-to-qcode.c
GEN ui/input-keymap-xorgxquartz-to-qcode.c
GEN ui/input-keymap-xorgxwin-to-qcode.c
GEN tests/test-qapi-gen
GEN trace-root.h
GEN util/trace.h
GEN crypto/trace.h
GEN io/trace.h
GEN migration/trace.h
GEN block/trace.h
GEN chardev/trace.h
GEN hw/block/trace.h
GEN hw/block/dataplane/trace.h
GEN hw/char/trace.h
GEN hw/intc/trace.h
GEN hw/net/trace.h
GEN hw/rdma/trace.h
GEN hw/rdma/vmw/trace.h
GEN hw/virtio/trace.h
GEN hw/audio/trace.h
GEN hw/misc/trace.h
GEN hw/misc/macio/trace.h
GEN hw/usb/trace.h
GEN hw/scsi/trace.h
GEN hw/nvram/trace.h
GEN hw/display/trace.h
GEN hw/input/trace.h
GEN hw/timer/trace.h
GEN hw/dma/trace.h
GEN hw/sparc/trace.h
GEN hw/sparc64/trace.h
GEN hw/sd/trace.h
GEN hw/isa/trace.h
GEN hw/mem/trace.h
GEN hw/i386/trace.h
GEN hw/i386/xen/trace.h
GEN hw/9pfs/trace.h
GEN hw/ppc/trace.h
GEN hw/pci/trace.h
GEN hw/pci-host/trace.h
GEN hw/s390x/trace.h
GEN hw/vfio/trace.h
GEN hw/acpi/trace.h
GEN hw/arm/trace.h
GEN hw/alpha/trace.h
GEN hw/hppa/trace.h
GEN hw/xen/trace.h
GEN hw/ide/trace.h
GEN hw/tpm/trace.h
GEN ui/trace.h
GEN audio/trace.h
GEN net/trace.h
GEN target/arm/trace.h
GEN target/i386/trace.h
GEN target/mips/trace.h
GEN target/sparc/trace.h
GEN target/s390x/trace.h
GEN target/ppc/trace.h
GEN qom/trace.h
GEN linux-user/trace.h
GEN qapi/trace.h
GEN accel/tcg/trace.h
GEN accel/kvm/trace.h
GEN nbd/trace.h
GEN scsi/trace.h
GEN trace-root.c
GEN util/trace.c
GEN crypto/trace.c
GEN io/trace.c
GEN migration/trace.c
GEN block/trace.c
GEN chardev/trace.c
GEN hw/block/trace.c
GEN hw/block/dataplane/trace.c
GEN hw/char/trace.c
GEN hw/intc/trace.c
GEN hw/net/trace.c
GEN hw/rdma/trace.c
GEN hw/rdma/vmw/trace.c
GEN hw/virtio/trace.c
GEN hw/audio/trace.c
GEN hw/misc/trace.c
GEN hw/misc/macio/trace.c
GEN hw/usb/trace.c
GEN hw/scsi/trace.c
GEN hw/nvram/trace.c
GEN hw/display/trace.c
GEN hw/input/trace.c
GEN hw/timer/trace.c
GEN hw/dma/trace.c
GEN hw/sparc/trace.c
GEN hw/sparc64/trace.c
GEN hw/sd/trace.c
GEN hw/isa/trace.c
GEN hw/mem/trace.c
GEN hw/i386/trace.c
GEN hw/i386/xen/trace.c
GEN hw/9pfs/trace.c
GEN hw/ppc/trace.c
GEN hw/pci/trace.c
GEN hw/pci-host/trace.c
GEN hw/s390x/trace.c
GEN hw/vfio/trace.c
GEN hw/acpi/trace.c
GEN hw/arm/trace.c
GEN hw/alpha/trace.c
GEN hw/hppa/trace.c
GEN hw/xen/trace.c
GEN hw/ide/trace.c
GEN hw/tpm/trace.c
GEN ui/trace.c
GEN audio/trace.c
GEN net/trace.c
GEN target/arm/trace.c
GEN target/i386/trace.c
GEN target/mips/trace.c
GEN target/sparc/trace.c
GEN target/s390x/trace.c
GEN target/ppc/trace.c
GEN qom/trace.c
GEN linux-user/trace.c
GEN qapi/trace.c
GEN accel/tcg/trace.c
GEN accel/kvm/trace.c
GEN nbd/trace.c
GEN scsi/trace.c
GEN config-all-devices.mak
DEP /tmp/qemu-test/src/dtc/tests/dumptrees.c
DEP /tmp/qemu-test/src/dtc/tests/trees.S
DEP /tmp/qemu-test/src/dtc/tests/testutils.c
DEP /tmp/qemu-test/src/dtc/tests/value-labels.c
DEP /tmp/qemu-test/src/dtc/tests/asm_tree_dump.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_property.c
DEP /tmp/qemu-test/src/dtc/tests/check_path.c
DEP /tmp/qemu-test/src/dtc/tests/overlay_bad_fixup.c
DEP /tmp/qemu-test/src/dtc/tests/overlay.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/property_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/utilfdt_test.c
DEP /tmp/qemu-test/src/dtc/tests/integer-expressions.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset_aliases.c
DEP /tmp/qemu-test/src/dtc/tests/add_subnode_with_nops.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_unordered.c
DEP /tmp/qemu-test/src/dtc/tests/dtb_reverse.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_ordered.c
DEP /tmp/qemu-test/src/dtc/tests/extra-terminating-null.c
DEP /tmp/qemu-test/src/dtc/tests/incbin.c
DEP /tmp/qemu-test/src/dtc/tests/boot-cpuid.c
DEP /tmp/qemu-test/src/dtc/tests/phandle_format.c
DEP /tmp/qemu-test/src/dtc/tests/path-references.c
DEP /tmp/qemu-test/src/dtc/tests/references.c
DEP /tmp/qemu-test/src/dtc/tests/string_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/propname_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop2.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop1.c
DEP /tmp/qemu-test/src/dtc/tests/del_node.c
DEP /tmp/qemu-test/src/dtc/tests/del_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop.c
DEP /tmp/qemu-test/src/dtc/tests/set_name.c
DEP /tmp/qemu-test/src/dtc/tests/rw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/open_pack.c
DEP /tmp/qemu-test/src/dtc/tests/nopulate.c
DEP /tmp/qemu-test/src/dtc/tests/mangle-layout.c
DEP /tmp/qemu-test/src/dtc/tests/move_and_save.c
DEP /tmp/qemu-test/src/dtc/tests/sw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/nop_node.c
DEP /tmp/qemu-test/src/dtc/tests/nop_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop_inplace.c
DEP /tmp/qemu-test/src/dtc/tests/stringlist.c
DEP /tmp/qemu-test/src/dtc/tests/addr_size_cells.c
DEP /tmp/qemu-test/src/dtc/tests/notfound.c
DEP /tmp/qemu-test/src/dtc/tests/sized_cells.c
DEP /tmp/qemu-test/src/dtc/tests/char_literal.c
DEP /tmp/qemu-test/src/dtc/tests/get_alias.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_check_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_prop_value.c
DEP /tmp/qemu-test/src/dtc/tests/parent_offset.c
DEP /tmp/qemu-test/src/dtc/tests/supernode_atdepth_offset.c
DEP /tmp/qemu-test/src/dtc/tests/get_path.c
DEP /tmp/qemu-test/src/dtc/tests/get_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/getprop.c
DEP /tmp/qemu-test/src/dtc/tests/get_name.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_offset.c
DEP /tmp/qemu-test/src/dtc/tests/root_node.c
DEP /tmp/qemu-test/src/dtc/tests/find_property.c
DEP /tmp/qemu-test/src/dtc/tests/get_mem_rsv.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_overlay.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_addresses.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_empty_tree.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_rw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_strerror.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_sw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_wip.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_ro.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt.c
DEP /tmp/qemu-test/src/dtc/fdtoverlay.c
DEP /tmp/qemu-test/src/dtc/util.c
DEP /tmp/qemu-test/src/dtc/fdtput.c
DEP /tmp/qemu-test/src/dtc/fdtget.c
DEP /tmp/qemu-test/src/dtc/fdtdump.c
DEP /tmp/qemu-test/src/dtc/srcpos.c
LEX convert-dtsv0-lexer.lex.c
LEX dtc-lexer.lex.c
BISON dtc-parser.tab.c
DEP /tmp/qemu-test/src/dtc/treesource.c
DEP /tmp/qemu-test/src/dtc/livetree.c
DEP /tmp/qemu-test/src/dtc/fstree.c
DEP /tmp/qemu-test/src/dtc/flattree.c
DEP /tmp/qemu-test/src/dtc/dtc.c
DEP /tmp/qemu-test/src/dtc/data.c
DEP /tmp/qemu-test/src/dtc/checks.c
DEP convert-dtsv0-lexer.lex.c
DEP dtc-parser.tab.c
DEP dtc-lexer.lex.c
CHK version_gen.h
UPD version_gen.h
DEP /tmp/qemu-test/src/dtc/util.c
CC libfdt/fdt_ro.o
CC libfdt/fdt.o
CC libfdt/fdt_wip.o
CC libfdt/fdt_sw.o
CC libfdt/fdt_strerror.o
CC libfdt/fdt_empty_tree.o
CC libfdt/fdt_rw.o
CC libfdt/fdt_addresses.o
CC libfdt/fdt_overlay.o
AR libfdt/libfdt.a
ar: creating libfdt/libfdt.a
a - libfdt/fdt.o
a - libfdt/fdt_ro.o
a - libfdt/fdt_wip.o
a - libfdt/fdt_sw.o
a - libfdt/fdt_rw.o
a - libfdt/fdt_strerror.o
a - libfdt/fdt_empty_tree.o
a - libfdt/fdt_addresses.o
a - libfdt/fdt_overlay.o
mkdir -p dtc/libfdt
mkdir -p dtc/tests
CC tests/qemu-iotests/socket_scm_helper.o
GEN qga/qapi-generated/qapi-gen
CC qapi/qapi-builtin-types.o
CC qapi/qapi-types.o
CC qapi/qapi-types-char.o
CC qapi/qapi-types-block.o
CC qapi/qapi-types-block-core.o
CC qapi/qapi-types-common.o
CC qapi/qapi-types-crypto.o
CC qapi/qapi-types-introspect.o
CC qapi/qapi-types-migration.o
CC qapi/qapi-types-misc.o
CC qapi/qapi-types-net.o
CC qapi/qapi-types-rocker.o
CC qapi/qapi-types-run-state.o
CC qapi/qapi-types-sockets.o
CC qapi/qapi-types-tpm.o
CC qapi/qapi-types-trace.o
CC qapi/qapi-types-transaction.o
CC qapi/qapi-types-ui.o
CC qapi/qapi-builtin-visit.o
CC qapi/qapi-visit-block-core.o
CC qapi/qapi-visit.o
CC qapi/qapi-visit-block.o
CC qapi/qapi-visit-char.o
CC qapi/qapi-visit-common.o
CC qapi/qapi-visit-crypto.o
CC qapi/qapi-visit-introspect.o
CC qapi/qapi-visit-migration.o
CC qapi/qapi-visit-misc.o
CC qapi/qapi-visit-net.o
CC qapi/qapi-visit-rocker.o
CC qapi/qapi-visit-run-state.o
CC qapi/qapi-visit-sockets.o
CC qapi/qapi-visit-tpm.o
CC qapi/qapi-visit-trace.o
CC qapi/qapi-visit-transaction.o
CC qapi/qapi-visit-ui.o
CC qapi/qapi-events.o
CC qapi/qapi-events-block-core.o
CC qapi/qapi-events-block.o
CC qapi/qapi-events-char.o
CC qapi/qapi-events-common.o
CC qapi/qapi-events-crypto.o
CC qapi/qapi-events-introspect.o
CC qapi/qapi-events-migration.o
CC qapi/qapi-events-misc.o
CC qapi/qapi-events-net.o
CC qapi/qapi-events-rocker.o
CC qapi/qapi-events-run-state.o
CC qapi/qapi-events-sockets.o
CC qapi/qapi-events-tpm.o
CC qapi/qapi-events-trace.o
CC qapi/qapi-events-transaction.o
CC qapi/qapi-events-ui.o
CC qapi/qapi-introspect.o
CC qapi/qapi-visit-core.o
CC qapi/qapi-dealloc-visitor.o
CC qapi/qobject-input-visitor.o
CC qapi/qobject-output-visitor.o
CC qapi/qmp-registry.o
CC qapi/qmp-dispatch.o
CC qapi/string-input-visitor.o
CC qapi/string-output-visitor.o
CC qapi/opts-visitor.o
CC qapi/qapi-clone-visitor.o
CC qapi/qmp-event.o
CC qapi/qapi-util.o
CC qobject/qnull.o
CC qobject/qnum.o
CC qobject/qstring.o
CC qobject/qdict.o
CC qobject/qlist.o
CC qobject/qbool.o
CC qobject/qlit.o
CC qobject/qjson.o
CC qobject/qobject.o
CC qobject/json-lexer.o
CC qobject/json-streamer.o
CC qobject/json-parser.o
CC trace/control.o
CC trace/qmp.o
CC util/osdep.o
CC util/cutils.o
CC util/unicode.o
CC util/qemu-timer-common.o
CC util/bufferiszero.o
CC util/lockcnt.o
CC util/aiocb.o
CC util/async.o
CC util/aio-wait.o
CC util/qemu-timer.o
CC util/thread-pool.o
CC util/main-loop.o
CC util/iohandler.o
CC util/aio-posix.o
CC util/compatfd.o
CC util/event_notifier-posix.o
CC util/mmap-alloc.o
CC util/qemu-openpty.o
CC util/oslib-posix.o
CC util/qemu-thread-posix.o
CC util/memfd.o
CC util/envlist.o
CC util/path.o
CC util/module.o
CC util/host-utils.o
CC util/bitmap.o
CC util/bitops.o
CC util/hbitmap.o
CC util/fifo8.o
CC util/acl.o
CC util/cacheinfo.o
CC util/error.o
CC util/qemu-error.o
CC util/id.o
CC util/iov.o
CC util/qemu-config.o
CC util/qemu-sockets.o
CC util/uri.o
CC util/notify.o
CC util/qemu-option.o
CC util/qemu-progress.o
CC util/keyval.o
CC util/hexdump.o
CC util/crc32c.o
CC util/uuid.o
CC util/throttle.o
CC util/getauxval.o
CC util/readline.o
CC util/rcu.o
CC util/qemu-coroutine-lock.o
CC util/qemu-coroutine-io.o
CC util/qemu-coroutine.o
CC util/qemu-coroutine-sleep.o
CC util/coroutine-ucontext.o
CC util/buffer.o
CC util/timed-average.o
CC util/base64.o
CC util/log.o
CC util/pagesize.o
CC util/qdist.o
CC util/qht.o
CC util/range.o
CC util/stats64.o
CC util/systemd.o
CC trace-root.o
CC util/vfio-helpers.o
CC util/trace.o
CC crypto/trace.o
CC io/trace.o
CC migration/trace.o
CC block/trace.o
CC chardev/trace.o
CC hw/block/trace.o
CC hw/block/dataplane/trace.o
CC hw/char/trace.o
CC hw/intc/trace.o
CC hw/net/trace.o
CC hw/rdma/trace.o
CC hw/rdma/vmw/trace.o
CC hw/virtio/trace.o
CC hw/audio/trace.o
CC hw/misc/trace.o
CC hw/misc/macio/trace.o
CC hw/usb/trace.o
CC hw/scsi/trace.o
CC hw/nvram/trace.o
CC hw/display/trace.o
CC hw/input/trace.o
CC hw/timer/trace.o
CC hw/dma/trace.o
CC hw/sparc/trace.o
CC hw/sparc64/trace.o
CC hw/sd/trace.o
CC hw/isa/trace.o
CC hw/mem/trace.o
CC hw/i386/trace.o
CC hw/i386/xen/trace.o
CC hw/9pfs/trace.o
CC hw/ppc/trace.o
CC hw/pci/trace.o
CC hw/pci-host/trace.o
CC hw/vfio/trace.o
CC hw/acpi/trace.o
CC hw/s390x/trace.o
CC hw/arm/trace.o
CC hw/alpha/trace.o
CC hw/hppa/trace.o
CC hw/xen/trace.o
CC hw/ide/trace.o
CC hw/tpm/trace.o
CC ui/trace.o
CC audio/trace.o
CC net/trace.o
CC target/arm/trace.o
CC target/i386/trace.o
CC target/sparc/trace.o
CC target/mips/trace.o
CC target/s390x/trace.o
CC target/ppc/trace.o
CC qom/trace.o
CC linux-user/trace.o
CC qapi/trace.o
CC accel/tcg/trace.o
CC accel/kvm/trace.o
CC nbd/trace.o
CC scsi/trace.o
CC crypto/pbkdf-stub.o
CC stubs/arch-query-cpu-def.o
CC stubs/arch-query-cpu-model-expansion.o
CC stubs/arch-query-cpu-model-comparison.o
CC stubs/arch-query-cpu-model-baseline.o
CC stubs/bdrv-next-monitor-owned.o
CC stubs/blk-commit-all.o
CC stubs/blockdev-close-all-bdrv-states.o
CC stubs/clock-warp.o
CC stubs/cpu-get-clock.o
CC stubs/cpu-get-icount.o
CC stubs/dump.o
CC stubs/error-printf.o
CC stubs/fdset.o
CC stubs/gdbstub.o
CC stubs/get-vm-name.o
CC stubs/iothread.o
CC stubs/iothread-lock.o
CC stubs/is-daemonized.o
CC stubs/machine-init-done.o
CC stubs/migr-blocker.o
CC stubs/change-state-handler.o
CC stubs/monitor.o
CC stubs/notify-event.o
CC stubs/qtest.o
CC stubs/replay.o
CC stubs/runstate-check.o
CC stubs/set-fd-handler.o
CC stubs/slirp.o
CC stubs/sysbus.o
CC stubs/tpm.o
CC stubs/trace-control.o
CC stubs/uuid.o
CC stubs/vm-stop.o
CC stubs/vmstate.o
CC stubs/qmp_pc_dimm.o
CC stubs/target-monitor-defs.o
CC stubs/target-get-monitor-def.o
CC stubs/pc_madt_cpu_entry.o
CC stubs/vmgenid.o
CC stubs/xen-common.o
CC stubs/xen-hvm.o
CC stubs/ram-block.o
CC stubs/pci-host-piix.o
CC contrib/ivshmem-client/ivshmem-client.o
CC contrib/ivshmem-client/main.o
CC contrib/ivshmem-server/ivshmem-server.o
CC contrib/ivshmem-server/main.o
CC qemu-nbd.o
CC block.o
CC blockjob.o
CC qemu-io-cmds.o
CC replication.o
CC block/raw-format.o
CC block/qcow.o
CC block/vdi.o
CC block/vmdk.o
CC block/cloop.o
CC block/bochs.o
CC block/vpc.o
CC block/vvfat.o
CC block/dmg.o
CC block/qcow2.o
CC block/qcow2-refcount.o
CC block/qcow2-cluster.o
CC block/qcow2-snapshot.o
CC block/qcow2-cache.o
CC block/qcow2-bitmap.o
CC block/qed.o
CC block/qed-l2-cache.o
CC block/qed-table.o
CC block/qed-cluster.o
CC block/qed-check.o
CC block/vhdx.o
CC block/vhdx-endian.o
CC block/vhdx-log.o
CC block/quorum.o
CC block/parallels.o
CC block/blkdebug.o
CC block/blkverify.o
CC block/blkreplay.o
CC block/block-backend.o
CC block/snapshot.o
CC block/qapi.o
CC block/file-posix.o
CC block/null.o
CC block/mirror.o
CC block/commit.o
CC block/io.o
CC block/create.o
CC block/throttle-groups.o
CC block/nvme.o
CC block/nbd.o
CC block/nbd-client.o
CC block/sheepdog.o
CC block/accounting.o
CC block/dirty-bitmap.o
CC block/write-threshold.o
CC block/backup.o
CC block/replication.o
CC block/throttle.o
CC block/crypto.o
CC nbd/server.o
CC nbd/client.o
CC nbd/common.o
CC scsi/utils.o
CC scsi/pr-manager.o
CC scsi/pr-manager-helper.o
CC block/dmg-bz2.o
CC crypto/hash.o
CC crypto/init.o
CC crypto/hash-glib.o
CC crypto/hmac.o
CC crypto/hmac-glib.o
CC crypto/aes.o
CC crypto/desrfb.o
CC crypto/cipher.o
CC crypto/tlscreds.o
CC crypto/tlscredsanon.o
CC crypto/tlscredsx509.o
CC crypto/tlssession.o
CC crypto/random-platform.o
CC crypto/secret.o
CC crypto/pbkdf.o
CC crypto/ivgen.o
CC crypto/ivgen-essiv.o
CC crypto/ivgen-plain.o
CC crypto/ivgen-plain64.o
CC crypto/afsplit.o
CC crypto/xts.o
CC crypto/block.o
CC crypto/block-qcow.o
CC crypto/block-luks.o
CC io/channel.o
CC io/channel-buffer.o
CC io/channel-command.o
CC io/channel-file.o
CC io/channel-socket.o
CC io/channel-tls.o
CC io/channel-watch.o
CC io/channel-websock.o
CC io/channel-util.o
CC io/dns-resolver.o
CC io/net-listener.o
CC io/task.o
CC qom/object.o
CC qom/container.o
CC qom/qom-qobject.o
CC qom/object_interfaces.o
GEN qemu-img-cmds.h
CC scsi/qemu-pr-helper.o
CC qemu-io.o
CC qemu-bridge-helper.o
CC blockdev.o
CC blockdev-nbd.o
CC bootdevice.o
CC iothread.o
CC qdev-monitor.o
CC device-hotplug.o
CC os-posix.o
CC bt-host.o
CC bt-vhci.o
CC dma-helpers.o
CC vl.o
CC tpm.o
CC device_tree.o
CC qapi/qapi-commands.o
CC qapi/qapi-commands-block-core.o
CC qapi/qapi-commands-block.o
CC qapi/qapi-commands-char.o
CC qapi/qapi-commands-common.o
CC qapi/qapi-commands-crypto.o
CC qapi/qapi-commands-introspect.o
CC qapi/qapi-commands-migration.o
CC qapi/qapi-commands-misc.o
CC qapi/qapi-commands-net.o
CC qapi/qapi-commands-rocker.o
CC qapi/qapi-commands-run-state.o
CC qapi/qapi-commands-sockets.o
CC qapi/qapi-commands-tpm.o
CC qapi/qapi-commands-trace.o
CC qapi/qapi-commands-transaction.o
CC qapi/qapi-commands-ui.o
CC qmp.o
CC hmp.o
CC cpus-common.o
CC audio/audio.o
CC audio/noaudio.o
CC audio/wavaudio.o
CC audio/spiceaudio.o
CC audio/mixeng.o
CC audio/wavcapture.o
CC backends/rng.o
CC backends/rng-egd.o
CC backends/rng-random.o
CC backends/tpm.o
CC backends/hostmem.o
CC backends/hostmem-ram.o
CC backends/hostmem-file.o
CC backends/cryptodev.o
CC backends/cryptodev-builtin.o
CC backends/cryptodev-vhost.o
CC backends/cryptodev-vhost-user.o
CC backends/hostmem-memfd.o
CC block/stream.o
CC chardev/msmouse.o
CC chardev/wctablet.o
CC chardev/testdev.o
CC chardev/spice.o
CC disas/arm.o
CC disas/i386.o
CC fsdev/qemu-fsdev-dummy.o
CC fsdev/qemu-fsdev-opts.o
CC fsdev/qemu-fsdev-throttle.o
CC hw/acpi/core.o
CC hw/acpi/piix4.o
CC hw/acpi/pcihp.o
CC hw/acpi/ich9.o
CC hw/acpi/tco.o
CC hw/acpi/cpu_hotplug.o
CC hw/acpi/memory_hotplug.o
CC hw/acpi/cpu.o
CC hw/acpi/nvdimm.o
CC hw/acpi/vmgenid.o
CC hw/acpi/acpi_interface.o
CC hw/acpi/bios-linker-loader.o
CC hw/acpi/aml-build.o
CC hw/acpi/ipmi.o
CC hw/acpi/acpi-stub.o
CC hw/acpi/ipmi-stub.o
CC hw/audio/sb16.o
CC hw/audio/es1370.o
CC hw/audio/ac97.o
CC hw/audio/fmopl.o
CC hw/audio/adlib.o
CC hw/audio/gus.o
CC hw/audio/gusemu_hal.o
CC hw/audio/gusemu_mixer.o
CC hw/audio/cs4231a.o
CC hw/audio/intel-hda.o
CC hw/audio/hda-codec.o
CC hw/audio/pcspk.o
CC hw/audio/wm8750.o
CC hw/audio/pl041.o
CC hw/audio/lm4549.o
CC hw/audio/marvell_88w8618.o
CC hw/audio/soundhw.o
CC hw/block/block.o
CC hw/block/cdrom.o
CC hw/block/hd-geometry.o
CC hw/block/fdc.o
CC hw/block/m25p80.o
CC hw/block/nand.o
CC hw/block/pflash_cfi02.o
CC hw/block/pflash_cfi01.o
CC hw/block/xen_disk.o
CC hw/block/ecc.o
CC hw/block/onenand.o
CC hw/block/nvme.o
CC hw/bt/core.o
CC hw/bt/l2cap.o
CC hw/bt/sdp.o
CC hw/bt/hci.o
CC hw/bt/hid.o
CC hw/bt/hci-csr.o
CC hw/char/ipoctal232.o
CC hw/char/parallel.o
CC hw/char/parallel-isa.o
CC hw/char/pl011.o
CC hw/char/serial.o
CC hw/char/serial-pci.o
CC hw/char/serial-isa.o
CC hw/char/virtio-console.o
CC hw/char/xen_console.o
CC hw/char/cadence_uart.o
CC hw/char/cmsdk-apb-uart.o
CC hw/char/debugcon.o
CC hw/char/imx_serial.o
CC hw/core/qdev.o
CC hw/core/qdev-properties.o
CC hw/core/bus.o
CC hw/core/reset.o
CC hw/core/qdev-fw.o
CC hw/core/fw-path-provider.o
CC hw/core/irq.o
CC hw/core/hotplug.o
CC hw/core/nmi.o
CC hw/core/stream.o
CC hw/core/ptimer.o
CC hw/core/machine.o
CC hw/core/sysbus.o
CC hw/core/loader.o
CC hw/core/qdev-properties-system.o
CC hw/core/register.o
CC hw/core/or-irq.o
CC hw/core/split-irq.o
CC hw/core/platform-bus.o
CC hw/cpu/core.o
CC hw/display/ads7846.o
CC hw/display/cirrus_vga.o
CC hw/display/pl110.o
CC hw/display/sii9022.o
CC hw/display/ssd0303.o
CC hw/display/ssd0323.o
CC hw/display/xenfb.o
CC hw/display/vga-pci.o
CC hw/display/vga-isa.o
CC hw/display/vmware_vga.o
CC hw/display/blizzard.o
CC hw/display/exynos4210_fimd.o
CC hw/display/framebuffer.o
CC hw/display/tc6393xb.o
CC hw/display/qxl-logger.o
CC hw/display/qxl.o
CC hw/display/qxl-render.o
CC hw/dma/pl080.o
CC hw/dma/pl330.o
CC hw/dma/i8257.o
CC hw/dma/xilinx_axidma.o
CC hw/dma/xlnx-zynq-devcfg.o
CC hw/gpio/max7310.o
CC hw/gpio/pl061.o
CC hw/gpio/zaurus.o
CC hw/gpio/gpio_key.o
CC hw/i2c/core.o
CC hw/i2c/smbus.o
CC hw/i2c/smbus_eeprom.o
CC hw/i2c/i2c-ddc.o
CC hw/i2c/versatile_i2c.o
CC hw/i2c/smbus_ich9.o
CC hw/i2c/pm_smbus.o
CC hw/i2c/bitbang_i2c.o
CC hw/i2c/exynos4210_i2c.o
CC hw/i2c/imx_i2c.o
CC hw/i2c/aspeed_i2c.o
CC hw/ide/core.o
CC hw/ide/atapi.o
CC hw/ide/qdev.o
CC hw/ide/pci.o
CC hw/ide/isa.o
CC hw/ide/piix.o
CC hw/ide/microdrive.o
CC hw/ide/ahci.o
CC hw/ide/ahci-allwinner.o
CC hw/ide/ich.o
CC hw/input/hid.o
CC hw/input/lm832x.o
CC hw/input/pckbd.o
CC hw/input/pl050.o
CC hw/input/ps2.o
CC hw/input/stellaris_input.o
CC hw/input/tsc2005.o
CC hw/input/virtio-input.o
CC hw/input/virtio-input-hid.o
CC hw/input/virtio-input-host.o
CC hw/intc/i8259_common.o
CC hw/intc/i8259.o
CC hw/intc/pl190.o
CC hw/intc/xlnx-pmu-iomod-intc.o
CC hw/intc/xlnx-zynqmp-ipi.o
CC hw/intc/imx_avic.o
CC hw/intc/imx_gpcv2.o
CC hw/intc/realview_gic.o
CC hw/intc/ioapic_common.o
CC hw/intc/arm_gic_common.o
CC hw/intc/arm_gic.o
CC hw/intc/arm_gicv2m.o
CC hw/intc/arm_gicv3_common.o
CC hw/intc/arm_gicv3.o
CC hw/intc/arm_gicv3_dist.o
CC hw/intc/arm_gicv3_redist.o
CC hw/intc/arm_gicv3_its_common.o
CC hw/intc/intc.o
CC hw/ipack/ipack.o
CC hw/ipack/tpci200.o
CC hw/ipmi/ipmi.o
CC hw/ipmi/ipmi_bmc_sim.o
CC hw/ipmi/ipmi_bmc_extern.o
CC hw/ipmi/isa_ipmi_kcs.o
CC hw/ipmi/isa_ipmi_bt.o
CC hw/isa/isa-bus.o
CC hw/isa/isa-superio.o
CC hw/isa/smc37c669-superio.o
CC hw/isa/apm.o
CC hw/mem/pc-dimm.o
CC hw/mem/nvdimm.o
CC hw/misc/applesmc.o
CC hw/misc/max111x.o
CC hw/misc/tmp105.o
CC hw/misc/tmp421.o
CC hw/misc/debugexit.o
CC hw/misc/sga.o
CC hw/misc/pc-testdev.o
CC hw/misc/pci-testdev.o
CC hw/misc/edu.o
CC hw/misc/unimp.o
CC hw/misc/vmcoreinfo.o
CC hw/misc/arm_l2x0.o
CC hw/misc/arm_integrator_debug.o
CC hw/misc/a9scu.o
CC hw/misc/arm11scu.o
CC hw/net/xen_nic.o
CC hw/net/ne2000.o
CC hw/net/eepro100.o
CC hw/net/pcnet-pci.o
CC hw/net/pcnet.o
CC hw/net/e1000.o
CC hw/net/e1000x_common.o
CC hw/net/net_tx_pkt.o
CC hw/net/net_rx_pkt.o
CC hw/net/e1000e.o
CC hw/net/e1000e_core.o
CC hw/net/rtl8139.o
CC hw/net/vmxnet3.o
CC hw/net/smc91c111.o
CC hw/net/lan9118.o
CC hw/net/ne2000-isa.o
CC hw/net/xgmac.o
CC hw/net/xilinx_axienet.o
CC hw/net/allwinner_emac.o
CC hw/net/imx_fec.o
CC hw/net/cadence_gem.o
CC hw/net/stellaris_enet.o
CC hw/net/ftgmac100.o
CC hw/net/rocker/rocker.o
CC hw/net/rocker/rocker_fp.o
CC hw/net/rocker/rocker_desc.o
CC hw/net/rocker/rocker_world.o
CC hw/net/rocker/rocker_of_dpa.o
CC hw/net/can/can_sja1000.o
CC hw/net/can/can_kvaser_pci.o
CC hw/net/can/can_pcm3680_pci.o
CC hw/net/can/can_mioe3680_pci.o
CC hw/nvram/eeprom93xx.o
CC hw/nvram/eeprom_at24c.o
CC hw/nvram/fw_cfg.o
CC hw/nvram/chrp_nvram.o
CC hw/pci-bridge/pci_bridge_dev.o
CC hw/pci-bridge/pcie_root_port.o
CC hw/pci-bridge/gen_pcie_root_port.o
CC hw/pci-bridge/pcie_pci_bridge.o
CC hw/pci-bridge/pci_expander_bridge.o
CC hw/pci-bridge/xio3130_upstream.o
CC hw/pci-bridge/xio3130_downstream.o
CC hw/pci-bridge/ioh3420.o
CC hw/pci-bridge/i82801b11.o
CC hw/pci-host/pam.o
CC hw/pci-host/versatile.o
CC hw/pci-host/piix.o
CC hw/pci-host/q35.o
CC hw/pci-host/gpex.o
CC hw/pci-host/designware.o
CC hw/pci/pci.o
CC hw/pci/pci_bridge.o
CC hw/pci/msix.o
CC hw/pci/msi.o
CC hw/pci/shpc.o
CC hw/pci/slotid_cap.o
CC hw/pci/pci_host.o
CC hw/pci/pcie_host.o
CC hw/pci/pcie.o
CC hw/pci/pcie_aer.o
CC hw/pci/pcie_port.o
CC hw/pci/pci-stub.o
CC hw/pcmcia/pcmcia.o
CC hw/scsi/scsi-disk.o
CC hw/scsi/scsi-generic.o
CC hw/scsi/scsi-bus.o
CC hw/scsi/lsi53c895a.o
CC hw/scsi/mptsas.o
CC hw/scsi/mptconfig.o
CC hw/scsi/mptendian.o
CC hw/scsi/megasas.o
CC hw/scsi/vmw_pvscsi.o
CC hw/scsi/esp.o
CC hw/scsi/esp-pci.o
CC hw/sd/pl181.o
CC hw/sd/ssi-sd.o
CC hw/sd/sd.o
CC hw/sd/core.o
CC hw/sd/sdmmc-internal.o
CC hw/sd/sdhci.o
CC hw/smbios/smbios.o
CC hw/smbios/smbios_type_38.o
CC hw/smbios/smbios-stub.o
CC hw/smbios/smbios_type_38-stub.o
CC hw/ssi/pl022.o
CC hw/ssi/ssi.o
CC hw/ssi/xilinx_spips.o
CC hw/ssi/aspeed_smc.o
CC hw/ssi/stm32f2xx_spi.o
CC hw/ssi/mss-spi.o
CC hw/timer/arm_timer.o
CC hw/timer/arm_mptimer.o
CC hw/timer/armv7m_systick.o
CC hw/timer/a9gtimer.o
CC hw/timer/cadence_ttc.o
CC hw/timer/ds1338.o
CC hw/timer/hpet.o
CC hw/timer/i8254_common.o
CC hw/timer/pl031.o
CC hw/timer/i8254.o
CC hw/timer/twl92230.o
CC hw/timer/imx_epit.o
CC hw/timer/imx_gpt.o
CC hw/timer/xlnx-zynqmp-rtc.o
CC hw/timer/stm32f2xx_timer.o
CC hw/timer/aspeed_timer.o
CC hw/timer/cmsdk-apb-timer.o
CC hw/timer/mss-timer.o
CC hw/tpm/tpm_util.o
CC hw/tpm/tpm_tis.o
CC hw/tpm/tpm_crb.o
CC hw/tpm/tpm_passthrough.o
CC hw/tpm/tpm_emulator.o
CC hw/usb/core.o
CC hw/usb/combined-packet.o
CC hw/usb/bus.o
CC hw/usb/libhw.o
CC hw/usb/desc.o
CC hw/usb/desc-msos.o
CC hw/usb/hcd-uhci.o
CC hw/usb/hcd-ohci.o
CC hw/usb/hcd-ehci.o
CC hw/usb/hcd-ehci-pci.o
CC hw/usb/hcd-ehci-sysbus.o
CC hw/usb/hcd-xhci.o
CC hw/usb/hcd-xhci-nec.o
CC hw/usb/hcd-musb.o
CC hw/usb/dev-hub.o
CC hw/usb/dev-hid.o
CC hw/usb/dev-storage.o
CC hw/usb/dev-wacom.o
CC hw/usb/dev-uas.o
CC hw/usb/dev-serial.o
CC hw/usb/dev-audio.o
CC hw/usb/dev-network.o
CC hw/usb/dev-bluetooth.o
CC hw/usb/dev-smartcard-reader.o
CC hw/usb/ccid-card-passthru.o
CC hw/usb/dev-mtp.o
CC hw/usb/host-stub.o
CC hw/usb/ccid-card-emulated.o
CC hw/virtio/virtio-rng.o
CC hw/virtio/virtio-pci.o
CC hw/virtio/virtio-mmio.o
CC hw/virtio/virtio-bus.o
CC hw/virtio/vhost-stub.o
CC hw/watchdog/watchdog.o
CC hw/watchdog/wdt_i6300esb.o
CC hw/watchdog/wdt_ib700.o
CC hw/watchdog/wdt_aspeed.o
CC hw/xen/xen_backend.o
CC hw/xen/xen_devconfig.o
CC hw/xen/xen_pvdev.o
CC migration/migration.o
CC migration/socket.o
CC hw/xen/xen-common.o
CC migration/fd.o
CC migration/exec.o
CC migration/tls.o
CC migration/channel.o
CC migration/savevm.o
CC migration/colo-comm.o
CC migration/colo.o
CC migration/colo-failover.o
CC migration/vmstate.o
CC migration/vmstate-types.o
CC migration/page_cache.o
CC migration/qemu-file.o
CC migration/global_state.o
CC migration/qemu-file-channel.o
CC migration/xbzrle.o
CC migration/postcopy-ram.o
CC migration/qjson.o
CC migration/block-dirty-bitmap.o
CC migration/block.o
CC net/net.o
CC net/queue.o
CC net/checksum.o
CC net/util.o
CC net/hub.o
CC net/socket.o
CC net/dump.o
CC net/eth.o
CC net/l2tpv3.o
CC net/vhost-user.o
CC net/slirp.o
CC net/filter.o
CC net/filter-buffer.o
CC net/filter-mirror.o
CC net/colo-compare.o
CC net/colo.o
CC net/filter-rewriter.o
CC net/filter-replay.o
CC net/tap.o
CC net/tap-linux.o
CC net/can/can_core.o
CC net/can/can_host.o
CC net/can/can_socketcan.o
CC qom/cpu.o
CC replay/replay.o
CC replay/replay-internal.o
CC replay/replay-events.o
CC replay/replay-time.o
CC replay/replay-input.o
CC replay/replay-char.o
CC replay/replay-snapshot.o
CC replay/replay-net.o
CC replay/replay-audio.o
CC slirp/cksum.o
CC slirp/ip_icmp.o
CC slirp/if.o
CC slirp/ip6_icmp.o
CC slirp/ip6_input.o
CC slirp/ip6_output.o
CC slirp/ip_input.o
CC slirp/ip_output.o
CC slirp/dnssearch.o
CC slirp/dhcpv6.o
CC slirp/mbuf.o
CC slirp/misc.o
CC slirp/slirp.o
CC slirp/sbuf.o
CC slirp/socket.o
CC slirp/tcp_input.o
CC slirp/tcp_output.o
CC slirp/tcp_subr.o
CC slirp/tcp_timer.o
CC slirp/udp.o
CC slirp/udp6.o
CC slirp/bootp.o
CC slirp/tftp.o
CC slirp/arp_table.o
/tmp/qemu-test/src/slirp/tcp_input.c: In function 'tcp_input':
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_p' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_len' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_tos' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_id' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_off' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_ttl' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_sum' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_src.s_addr' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:219: warning: 'save_ip.ip_dst.s_addr' may be used uninitialized in this function
/tmp/qemu-test/src/slirp/tcp_input.c:220: warning: 'save_ip6.ip_nh' may be used uninitialized in this function
CC slirp/ndp_table.o
CC slirp/ncsi.o
CC ui/keymaps.o
CC ui/console.o
CC ui/cursor.o
CC ui/qemu-pixman.o
CC ui/input.o
CC ui/input-keymap.o
CC ui/input-legacy.o
CC ui/input-linux.o
CC ui/spice-core.o
CC ui/spice-input.o
CC ui/spice-display.o
CC ui/vnc.o
CC ui/vnc-enc-zlib.o
CC ui/vnc-enc-hextile.o
CC ui/vnc-enc-tight.o
CC ui/vnc-palette.o
CC ui/vnc-enc-zrle.o
CC ui/vnc-auth-vencrypt.o
CC ui/vnc-ws.o
CC ui/vnc-jobs.o
CC ui/x_keymap.o
VERT ui/shader/texture-blit-vert.h
VERT ui/shader/texture-blit-flip-vert.h
FRAG ui/shader/texture-blit-frag.h
CC ui/console-gl.o
CC ui/egl-helpers.o
CC ui/egl-context.o
CC audio/ossaudio.o
CC ui/sdl.o
CC ui/sdl_zoom.o
CC ui/gtk.o
CC ui/gtk-egl.o
CC ui/curses.o
CC chardev/char.o
CC chardev/char-fd.o
CC chardev/char-fe.o
CC chardev/char-file.o
CC chardev/char-io.o
CC chardev/char-mux.o
CC chardev/char-null.o
CC chardev/char-parallel.o
CC chardev/char-pipe.o
CC chardev/char-pty.o
CC chardev/char-ringbuf.o
CC chardev/char-serial.o
CC chardev/char-socket.o
CC chardev/char-stdio.o
CC chardev/char-udp.o
LINK tests/qemu-iotests/socket_scm_helper
CC qga/commands.o
CC qga/guest-agent-command-state.o
CC qga/main.o
CC qga/commands-posix.o
CC qga/channel-posix.o
CC qga/qapi-generated/qga-qapi-types.o
CC qga/qapi-generated/qga-qapi-visit.o
CC qga/qapi-generated/qga-qapi-commands.o
AR libqemuutil.a
CC qemu-img.o
CC ui/shader.o
AS optionrom/multiboot.o
AS optionrom/linuxboot.o
CC optionrom/linuxboot_dma.o
AS optionrom/kvmvapic.o
cc: unrecognized option '-no-integrated-as'
cc: unrecognized option '-no-integrated-as'
BUILD optionrom/multiboot.img
BUILD optionrom/linuxboot.img
BUILD optionrom/kvmvapic.img
BUILD optionrom/multiboot.raw
BUILD optionrom/linuxboot_dma.img
BUILD optionrom/linuxboot.raw
BUILD optionrom/kvmvapic.raw
BUILD optionrom/linuxboot_dma.raw
SIGN optionrom/multiboot.bin
SIGN optionrom/linuxboot.bin
SIGN optionrom/kvmvapic.bin
SIGN optionrom/linuxboot_dma.bin
LINK qemu-ga
LINK ivshmem-client
LINK ivshmem-server
LINK qemu-nbd
In file included from /usr/include/gtk-2.0/gtk/gtk.h:235,
from /tmp/qemu-test/src/include/ui/gtk.h:10,
from /tmp/qemu-test/src/ui/gtk-egl.c:21:
/usr/include/gtk-2.0/gtk/gtkitemfactory.h:47: warning: function declaration isn't a prototype
In file included from /usr/include/gtk-2.0/gtk/gtk.h:235,
from /tmp/qemu-test/src/include/ui/gtk.h:10,
from /tmp/qemu-test/src/ui/gtk.c:45:
/usr/include/gtk-2.0/gtk/gtkitemfactory.h:47: warning: function declaration isn't a prototype
LINK qemu-img
LINK qemu-io
LINK scsi/qemu-pr-helper
LINK qemu-bridge-helper
GEN x86_64-softmmu/hmp-commands.h
GEN x86_64-softmmu/config-target.h
GEN x86_64-softmmu/hmp-commands-info.h
GEN aarch64-softmmu/hmp-commands-info.h
GEN aarch64-softmmu/hmp-commands.h
GEN aarch64-softmmu/config-target.h
CC x86_64-softmmu/exec.o
CC x86_64-softmmu/tcg/tcg.o
CC x86_64-softmmu/tcg/tcg-op-gvec.o
CC x86_64-softmmu/tcg/tcg-op-vec.o
CC x86_64-softmmu/tcg/tcg-common.o
CC x86_64-softmmu/tcg/tcg-op.o
CC x86_64-softmmu/tcg/optimize.o
CC x86_64-softmmu/fpu/softfloat.o
CC aarch64-softmmu/exec.o
CC x86_64-softmmu/disas.o
CC aarch64-softmmu/tcg/tcg.o
GEN x86_64-softmmu/gdbstub-xml.c
CC x86_64-softmmu/arch_init.o
/tmp/qemu-test/src/fpu/softfloat.c: In function 'int_to_float':
/tmp/qemu-test/src/fpu/softfloat.c:1517: warning: 'r.exp' may be used uninitialized in this function
/tmp/qemu-test/src/fpu/softfloat.c:1517: warning: 'r.frac' may be used uninitialized in this function
CC aarch64-softmmu/tcg/tcg-op.o
CC x86_64-softmmu/cpus.o
CC aarch64-softmmu/tcg/tcg-op-vec.o
CC x86_64-softmmu/monitor.o
CC aarch64-softmmu/tcg/tcg-op-gvec.o
CC x86_64-softmmu/gdbstub.o
CC aarch64-softmmu/tcg/tcg-common.o
CC x86_64-softmmu/balloon.o
CC aarch64-softmmu/tcg/optimize.o
CC aarch64-softmmu/fpu/softfloat.o
CC x86_64-softmmu/ioport.o
CC x86_64-softmmu/numa.o
CC aarch64-softmmu/disas.o
GEN aarch64-softmmu/gdbstub-xml.c
CC aarch64-softmmu/arch_init.o
CC x86_64-softmmu/qtest.o
/tmp/qemu-test/src/fpu/softfloat.c: In function 'int_to_float':
/tmp/qemu-test/src/fpu/softfloat.c:1517: warning: 'r.exp' may be used uninitialized in this function
/tmp/qemu-test/src/fpu/softfloat.c:1517: warning: 'r.frac' may be used uninitialized in this function
CC aarch64-softmmu/cpus.o
CC aarch64-softmmu/monitor.o
CC x86_64-softmmu/memory.o
CC x86_64-softmmu/memory_mapping.o
CC aarch64-softmmu/gdbstub.o
CC x86_64-softmmu/dump.o
CC x86_64-softmmu/migration/ram.o
CC aarch64-softmmu/balloon.o
CC x86_64-softmmu/accel/accel.o
CC x86_64-softmmu/accel/kvm/kvm-all.o
CC aarch64-softmmu/ioport.o
CC x86_64-softmmu/accel/stubs/hax-stub.o
CC aarch64-softmmu/numa.o
CC x86_64-softmmu/accel/stubs/hvf-stub.o
CC aarch64-softmmu/qtest.o
CC x86_64-softmmu/accel/stubs/whpx-stub.o
CC x86_64-softmmu/accel/tcg/tcg-all.o
CC aarch64-softmmu/memory.o
CC aarch64-softmmu/memory_mapping.o
CC x86_64-softmmu/accel/tcg/cputlb.o
CC aarch64-softmmu/dump.o
CC x86_64-softmmu/accel/tcg/tcg-runtime.o
CC aarch64-softmmu/migration/ram.o
CC aarch64-softmmu/accel/accel.o
CC x86_64-softmmu/accel/tcg/tcg-runtime-gvec.o
CC x86_64-softmmu/accel/tcg/cpu-exec.o
CC aarch64-softmmu/accel/stubs/hax-stub.o
CC aarch64-softmmu/accel/stubs/hvf-stub.o
CC aarch64-softmmu/accel/stubs/whpx-stub.o
CC x86_64-softmmu/accel/tcg/cpu-exec-common.o
CC x86_64-softmmu/accel/tcg/translate-all.o
CC x86_64-softmmu/accel/tcg/translator.o
CC aarch64-softmmu/accel/stubs/kvm-stub.o
CC aarch64-softmmu/accel/tcg/tcg-all.o
CC x86_64-softmmu/hw/block/virtio-blk.o
CC aarch64-softmmu/accel/tcg/cputlb.o
CC aarch64-softmmu/accel/tcg/tcg-runtime.o
CC x86_64-softmmu/hw/block/vhost-user-blk.o
CC aarch64-softmmu/accel/tcg/tcg-runtime-gvec.o
CC x86_64-softmmu/hw/block/dataplane/virtio-blk.o
CC x86_64-softmmu/hw/char/virtio-serial-bus.o
CC aarch64-softmmu/accel/tcg/cpu-exec.o
CC x86_64-softmmu/hw/core/generic-loader.o
CC aarch64-softmmu/accel/tcg/cpu-exec-common.o
CC x86_64-softmmu/hw/core/null-machine.o
CC aarch64-softmmu/accel/tcg/translate-all.o
CC x86_64-softmmu/hw/display/vga.o
CC x86_64-softmmu/hw/display/virtio-gpu.o
CC x86_64-softmmu/hw/display/virtio-gpu-3d.o
CC aarch64-softmmu/accel/tcg/translator.o
CC x86_64-softmmu/hw/display/virtio-gpu-pci.o
CC aarch64-softmmu/hw/adc/stm32f2xx_adc.o
CC x86_64-softmmu/hw/display/virtio-vga.o
CC aarch64-softmmu/hw/block/virtio-blk.o
CC aarch64-softmmu/hw/block/vhost-user-blk.o
CC aarch64-softmmu/hw/block/dataplane/virtio-blk.o
CC aarch64-softmmu/hw/char/exynos4210_uart.o
CC x86_64-softmmu/hw/intc/apic.o
CC x86_64-softmmu/hw/intc/apic_common.o
CC x86_64-softmmu/hw/intc/ioapic.o
CC aarch64-softmmu/hw/char/omap_uart.o
CC x86_64-softmmu/hw/isa/lpc_ich9.o
CC x86_64-softmmu/hw/misc/ivshmem.o
CC aarch64-softmmu/hw/char/digic-uart.o
CC aarch64-softmmu/hw/char/stm32f2xx_usart.o
CC aarch64-softmmu/hw/char/bcm2835_aux.o
CC x86_64-softmmu/hw/misc/pvpanic.o
CC aarch64-softmmu/hw/char/virtio-serial-bus.o
CC x86_64-softmmu/hw/misc/hyperv_testdev.o
CC aarch64-softmmu/hw/core/generic-loader.o
CC aarch64-softmmu/hw/core/null-machine.o
CC x86_64-softmmu/hw/misc/mmio_interface.o
CC x86_64-softmmu/hw/net/virtio-net.o
CC x86_64-softmmu/hw/net/vhost_net.o
CC aarch64-softmmu/hw/cpu/arm11mpcore.o
CC aarch64-softmmu/hw/cpu/realview_mpcore.o
CC aarch64-softmmu/hw/cpu/a9mpcore.o
CC aarch64-softmmu/hw/cpu/a15mpcore.o
CC aarch64-softmmu/hw/display/omap_dss.o
CC aarch64-softmmu/hw/display/omap_lcdc.o
CC aarch64-softmmu/hw/display/pxa2xx_lcd.o
CC x86_64-softmmu/hw/scsi/virtio-scsi.o
CC x86_64-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC x86_64-softmmu/hw/scsi/vhost-scsi-common.o
CC aarch64-softmmu/hw/display/bcm2835_fb.o
CC aarch64-softmmu/hw/display/vga.o
CC x86_64-softmmu/hw/scsi/vhost-scsi.o
CC aarch64-softmmu/hw/display/virtio-gpu.o
CC aarch64-softmmu/hw/display/virtio-gpu-3d.o
CC x86_64-softmmu/hw/scsi/vhost-user-scsi.o
CC x86_64-softmmu/hw/timer/mc146818rtc.o
CC aarch64-softmmu/hw/display/virtio-gpu-pci.o
CC x86_64-softmmu/hw/vfio/common.o
CC aarch64-softmmu/hw/display/dpcd.o
CC x86_64-softmmu/hw/vfio/pci.o
CC aarch64-softmmu/hw/display/xlnx_dp.o
CC x86_64-softmmu/hw/vfio/pci-quirks.o
CC aarch64-softmmu/hw/dma/xlnx_dpdma.o
CC aarch64-softmmu/hw/dma/omap_dma.o
CC aarch64-softmmu/hw/dma/soc_dma.o
CC aarch64-softmmu/hw/dma/pxa2xx_dma.o
CC x86_64-softmmu/hw/vfio/display.o
CC aarch64-softmmu/hw/dma/bcm2835_dma.o
CC aarch64-softmmu/hw/gpio/omap_gpio.o
CC x86_64-softmmu/hw/vfio/platform.o
CC x86_64-softmmu/hw/vfio/spapr.o
CC aarch64-softmmu/hw/gpio/imx_gpio.o
CC aarch64-softmmu/hw/gpio/bcm2835_gpio.o
CC aarch64-softmmu/hw/i2c/omap_i2c.o
CC x86_64-softmmu/hw/virtio/virtio.o
CC x86_64-softmmu/hw/virtio/virtio-balloon.o
CC aarch64-softmmu/hw/input/pxa2xx_keypad.o
CC x86_64-softmmu/hw/virtio/vhost.o
CC aarch64-softmmu/hw/input/tsc210x.o
CC aarch64-softmmu/hw/intc/armv7m_nvic.o
CC aarch64-softmmu/hw/intc/exynos4210_gic.o
CC aarch64-softmmu/hw/intc/exynos4210_combiner.o
CC aarch64-softmmu/hw/intc/omap_intc.o
CC aarch64-softmmu/hw/intc/bcm2835_ic.o
CC x86_64-softmmu/hw/virtio/vhost-backend.o
CC aarch64-softmmu/hw/intc/bcm2836_control.o
CC aarch64-softmmu/hw/intc/allwinner-a10-pic.o
CC aarch64-softmmu/hw/intc/aspeed_vic.o
CC x86_64-softmmu/hw/virtio/vhost-user.o
CC x86_64-softmmu/hw/virtio/vhost-vsock.o
CC x86_64-softmmu/hw/virtio/virtio-crypto.o
CC x86_64-softmmu/hw/virtio/virtio-crypto-pci.o
CC x86_64-softmmu/hw/xen/xen-host-pci-device.o
CC x86_64-softmmu/hw/xen/xen_pt.o
CC x86_64-softmmu/hw/xen/xen_pt_config_init.o
CC x86_64-softmmu/hw/xen/xen_pt_graphics.o
CC aarch64-softmmu/hw/intc/arm_gicv3_cpuif.o
CC x86_64-softmmu/hw/xen/xen_pt_msi.o
CC aarch64-softmmu/hw/misc/ivshmem.o
CC x86_64-softmmu/hw/xen/xen_pt_load_rom.o
CC aarch64-softmmu/hw/misc/arm_sysctl.o
CC aarch64-softmmu/hw/misc/cbus.o
CC x86_64-softmmu/hw/i386/multiboot.o
CC x86_64-softmmu/hw/i386/pc.o
CC aarch64-softmmu/hw/misc/exynos4210_pmu.o
CC x86_64-softmmu/hw/i386/pc_piix.o
CC x86_64-softmmu/hw/i386/pc_q35.o
CC aarch64-softmmu/hw/misc/exynos4210_clk.o
CC aarch64-softmmu/hw/misc/exynos4210_rng.o
CC x86_64-softmmu/hw/i386/pc_sysfw.o
CC aarch64-softmmu/hw/misc/imx_ccm.o
CC aarch64-softmmu/hw/misc/imx31_ccm.o
CC x86_64-softmmu/hw/i386/x86-iommu.o
CC aarch64-softmmu/hw/misc/imx25_ccm.o
/tmp/qemu-test/src/hw/i386/pc_piix.c: In function 'igd_passthrough_isa_bridge_create':
/tmp/qemu-test/src/hw/i386/pc_piix.c:1077: warning: 'pch_rev_id' may be used uninitialized in this function
CC aarch64-softmmu/hw/misc/imx6_ccm.o
CC x86_64-softmmu/hw/i386/intel_iommu.o
CC aarch64-softmmu/hw/misc/imx6_src.o
CC x86_64-softmmu/hw/i386/amd_iommu.o
CC aarch64-softmmu/hw/misc/imx7_ccm.o
CC x86_64-softmmu/hw/i386/vmport.o
CC aarch64-softmmu/hw/misc/imx2_wdt.o
CC aarch64-softmmu/hw/misc/imx7_snvs.o
CC x86_64-softmmu/hw/i386/vmmouse.o
CC aarch64-softmmu/hw/misc/imx7_gpr.o
CC x86_64-softmmu/hw/i386/kvmvapic.o
CC x86_64-softmmu/hw/i386/acpi-build.o
CC aarch64-softmmu/hw/misc/mst_fpga.o
CC aarch64-softmmu/hw/misc/omap_clk.o
CC aarch64-softmmu/hw/misc/omap_gpmc.o
CC aarch64-softmmu/hw/misc/omap_l4.o
CC aarch64-softmmu/hw/misc/omap_sdrc.o
/tmp/qemu-test/src/hw/i386/acpi-build.c: In function 'build_append_pci_bus_devices':
/tmp/qemu-test/src/hw/i386/acpi-build.c:510: warning: 'notify_method' may be used uninitialized in this function
CC aarch64-softmmu/hw/misc/omap_tap.o
CC aarch64-softmmu/hw/misc/bcm2835_mbox.o
CC aarch64-softmmu/hw/misc/bcm2835_property.o
CC x86_64-softmmu/hw/i386/../xenpv/xen_machine_pv.o
CC x86_64-softmmu/hw/i386/kvm/clock.o
CC aarch64-softmmu/hw/misc/bcm2835_rng.o
CC x86_64-softmmu/hw/i386/kvm/apic.o
CC aarch64-softmmu/hw/misc/zynq_slcr.o
CC aarch64-softmmu/hw/misc/zynq-xadc.o
CC aarch64-softmmu/hw/misc/stm32f2xx_syscfg.o
CC aarch64-softmmu/hw/misc/mps2-fpgaio.o
CC aarch64-softmmu/hw/misc/mps2-scc.o
CC aarch64-softmmu/hw/misc/iotkit-secctl.o
CC aarch64-softmmu/hw/misc/tz-ppc.o
CC x86_64-softmmu/hw/i386/kvm/i8259.o
CC x86_64-softmmu/hw/i386/kvm/ioapic.o
CC x86_64-softmmu/hw/i386/kvm/i8254.o
CC x86_64-softmmu/hw/i386/xen/xen_platform.o
CC aarch64-softmmu/hw/misc/auxbus.o
CC x86_64-softmmu/hw/i386/xen/xen_apic.o
CC aarch64-softmmu/hw/misc/aspeed_scu.o
CC x86_64-softmmu/hw/i386/xen/xen_pvdevice.o
CC aarch64-softmmu/hw/misc/aspeed_sdmc.o
CC x86_64-softmmu/hw/i386/xen/xen-hvm.o
CC aarch64-softmmu/hw/misc/mmio_interface.o
CC x86_64-softmmu/hw/i386/xen/xen-mapcache.o
CC x86_64-softmmu/target/i386/helper.o
CC x86_64-softmmu/target/i386/cpu.o
CC aarch64-softmmu/hw/misc/msf2-sysreg.o
CC x86_64-softmmu/target/i386/gdbstub.o
CC x86_64-softmmu/target/i386/xsave_helper.o
CC x86_64-softmmu/target/i386/translate.o
CC aarch64-softmmu/hw/net/virtio-net.o
CC x86_64-softmmu/target/i386/bpt_helper.o
CC aarch64-softmmu/hw/net/vhost_net.o
CC x86_64-softmmu/target/i386/cc_helper.o
CC x86_64-softmmu/target/i386/excp_helper.o
CC x86_64-softmmu/target/i386/fpu_helper.o
CC aarch64-softmmu/hw/pcmcia/pxa2xx.o
CC x86_64-softmmu/target/i386/int_helper.o
CC aarch64-softmmu/hw/scsi/virtio-scsi.o
CC aarch64-softmmu/hw/scsi/virtio-scsi-dataplane.o
CC x86_64-softmmu/target/i386/mem_helper.o
CC aarch64-softmmu/hw/scsi/vhost-scsi-common.o
CC aarch64-softmmu/hw/scsi/vhost-scsi.o
CC x86_64-softmmu/target/i386/misc_helper.o
CC aarch64-softmmu/hw/scsi/vhost-user-scsi.o
CC aarch64-softmmu/hw/sd/omap_mmc.o
CC x86_64-softmmu/target/i386/mpx_helper.o
CC aarch64-softmmu/hw/sd/pxa2xx_mmci.o
CC x86_64-softmmu/target/i386/seg_helper.o
CC aarch64-softmmu/hw/sd/bcm2835_sdhost.o
CC x86_64-softmmu/target/i386/smm_helper.o
CC x86_64-softmmu/target/i386/svm_helper.o
CC x86_64-softmmu/target/i386/machine.o
CC aarch64-softmmu/hw/ssi/omap_spi.o
CC x86_64-softmmu/target/i386/arch_memory_mapping.o
CC x86_64-softmmu/target/i386/arch_dump.o
CC aarch64-softmmu/hw/ssi/imx_spi.o
CC aarch64-softmmu/hw/timer/exynos4210_mct.o
CC x86_64-softmmu/target/i386/monitor.o
CC aarch64-softmmu/hw/timer/exynos4210_pwm.o
CC x86_64-softmmu/target/i386/kvm.o
CC x86_64-softmmu/target/i386/hyperv.o
CC aarch64-softmmu/hw/timer/exynos4210_rtc.o
CC x86_64-softmmu/target/i386/sev.o
CC aarch64-softmmu/hw/timer/omap_gptimer.o
CC aarch64-softmmu/hw/timer/omap_synctimer.o
CC aarch64-softmmu/hw/timer/pxa2xx_timer.o
GEN trace/generated-helpers.c
CC x86_64-softmmu/trace/control-target.o
CC aarch64-softmmu/hw/timer/allwinner-a10-pit.o
CC aarch64-softmmu/hw/timer/digic-timer.o
CC aarch64-softmmu/hw/usb/tusb6010.o
CC aarch64-softmmu/hw/usb/chipidea.o
CC aarch64-softmmu/hw/vfio/common.o
CC aarch64-softmmu/hw/vfio/pci.o
CC aarch64-softmmu/hw/vfio/pci-quirks.o
CC x86_64-softmmu/gdbstub-xml.o
CC aarch64-softmmu/hw/vfio/display.o
CC aarch64-softmmu/hw/vfio/platform.o
CC aarch64-softmmu/hw/vfio/calxeda-xgmac.o
CC aarch64-softmmu/hw/vfio/spapr.o
CC aarch64-softmmu/hw/vfio/amd-xgbe.o
CC x86_64-softmmu/trace/generated-helpers.o
CC aarch64-softmmu/hw/virtio/virtio.o
CC aarch64-softmmu/hw/virtio/virtio-balloon.o
CC aarch64-softmmu/hw/virtio/vhost.o
CC aarch64-softmmu/hw/virtio/vhost-backend.o
CC aarch64-softmmu/hw/virtio/vhost-user.o
CC aarch64-softmmu/hw/virtio/vhost-vsock.o
CC aarch64-softmmu/hw/virtio/virtio-crypto.o
CC aarch64-softmmu/hw/virtio/virtio-crypto-pci.o
CC aarch64-softmmu/hw/arm/boot.o
CC aarch64-softmmu/hw/arm/virt.o
CC aarch64-softmmu/hw/arm/sysbus-fdt.o
CC aarch64-softmmu/hw/arm/virt-acpi-build.o
CC aarch64-softmmu/hw/arm/digic_boards.o
CC aarch64-softmmu/hw/arm/exynos4_boards.o
CC aarch64-softmmu/hw/arm/highbank.o
LINK x86_64-softmmu/qemu-system-x86_64
CC aarch64-softmmu/hw/arm/integratorcp.o
CC aarch64-softmmu/hw/arm/mainstone.o
CC aarch64-softmmu/hw/arm/musicpal.o
CC aarch64-softmmu/hw/arm/netduino2.o
CC aarch64-softmmu/hw/arm/nseries.o
CC aarch64-softmmu/hw/arm/omap_sx1.o
CC aarch64-softmmu/hw/arm/palm.o
CC aarch64-softmmu/hw/arm/gumstix.o
CC aarch64-softmmu/hw/arm/spitz.o
CC aarch64-softmmu/hw/arm/tosa.o
CC aarch64-softmmu/hw/arm/z2.o
CC aarch64-softmmu/hw/arm/realview.o
CC aarch64-softmmu/hw/arm/stellaris.o
CC aarch64-softmmu/hw/arm/vexpress.o
CC aarch64-softmmu/hw/arm/collie.o
CC aarch64-softmmu/hw/arm/versatilepb.o
CC aarch64-softmmu/hw/arm/xilinx_zynq.o
CC aarch64-softmmu/hw/arm/armv7m.o
CC aarch64-softmmu/hw/arm/pxa2xx.o
CC aarch64-softmmu/hw/arm/exynos4210.o
CC aarch64-softmmu/hw/arm/pxa2xx_gpio.o
CC aarch64-softmmu/hw/arm/pxa2xx_pic.o
CC aarch64-softmmu/hw/arm/digic.o
CC aarch64-softmmu/hw/arm/omap1.o
CC aarch64-softmmu/hw/arm/omap2.o
CC aarch64-softmmu/hw/arm/allwinner-a10.o
CC aarch64-softmmu/hw/arm/strongarm.o
CC aarch64-softmmu/hw/arm/cubieboard.o
CC aarch64-softmmu/hw/arm/bcm2835_peripherals.o
CC aarch64-softmmu/hw/arm/bcm2836.o
CC aarch64-softmmu/hw/arm/raspi.o
CC aarch64-softmmu/hw/arm/stm32f205_soc.o
CC aarch64-softmmu/hw/arm/xlnx-zcu102.o
CC aarch64-softmmu/hw/arm/xlnx-zynqmp.o
CC aarch64-softmmu/hw/arm/fsl-imx25.o
CC aarch64-softmmu/hw/arm/imx25_pdk.o
CC aarch64-softmmu/hw/arm/fsl-imx31.o
CC aarch64-softmmu/hw/arm/kzm.o
CC aarch64-softmmu/hw/arm/fsl-imx6.o
CC aarch64-softmmu/hw/arm/sabrelite.o
CC aarch64-softmmu/hw/arm/aspeed.o
CC aarch64-softmmu/hw/arm/aspeed_soc.o
CC aarch64-softmmu/hw/arm/mps2.o
CC aarch64-softmmu/hw/arm/msf2-soc.o
CC aarch64-softmmu/hw/arm/mps2-tz.o
CC aarch64-softmmu/hw/arm/msf2-som.o
CC aarch64-softmmu/hw/arm/iotkit.o
CC aarch64-softmmu/hw/arm/mcimx7d-sabre.o
CC aarch64-softmmu/target/arm/arm-semi.o
CC aarch64-softmmu/hw/arm/fsl-imx7.o
CC aarch64-softmmu/target/arm/machine.o
CC aarch64-softmmu/target/arm/psci.o
CC aarch64-softmmu/target/arm/arch_dump.o
CC aarch64-softmmu/target/arm/monitor.o
CC aarch64-softmmu/target/arm/kvm-stub.o
CC aarch64-softmmu/target/arm/translate.o
CC aarch64-softmmu/target/arm/op_helper.o
CC aarch64-softmmu/target/arm/helper.o
CC aarch64-softmmu/target/arm/cpu.o
CC aarch64-softmmu/target/arm/neon_helper.o
CC aarch64-softmmu/target/arm/iwmmxt_helper.o
CC aarch64-softmmu/target/arm/vec_helper.o
CC aarch64-softmmu/target/arm/gdbstub.o
CC aarch64-softmmu/target/arm/cpu64.o
CC aarch64-softmmu/target/arm/translate-a64.o
CC aarch64-softmmu/target/arm/helper-a64.o
CC aarch64-softmmu/target/arm/gdbstub64.o
CC aarch64-softmmu/target/arm/crypto_helper.o
CC aarch64-softmmu/target/arm/arm-powerctl.o
GEN trace/generated-helpers.c
CC aarch64-softmmu/trace/control-target.o
CC aarch64-softmmu/gdbstub-xml.o
CC aarch64-softmmu/trace/generated-helpers.o
/tmp/qemu-test/src/target/arm/translate-a64.c: In function 'handle_shri_with_rndacc':
/tmp/qemu-test/src/target/arm/translate-a64.c:6651: warning: 'tcg_src_hi' may be used uninitialized in this function
/tmp/qemu-test/src/target/arm/translate-a64.c: In function 'disas_simd_two_reg_misc_fp16':
/tmp/qemu-test/src/target/arm/translate-a64.c:11716: warning: 'rmode' may be used uninitialized in this function
/tmp/qemu-test/src/target/arm/translate-a64.c: In function 'disas_simd_scalar_two_reg_misc':
/tmp/qemu-test/src/target/arm/translate-a64.c:8610: warning: 'rmode' may be used uninitialized in this function
LINK aarch64-softmmu/qemu-system-aarch64
mkdir -p dtc/libfdt
mkdir -p dtc/tests
TEST tests/qapi-schema/alternate-any.out
TEST tests/qapi-schema/alternate-base.out
TEST tests/qapi-schema/alternate-array.out
TEST tests/qapi-schema/alternate-clash.out
TEST tests/qapi-schema/alternate-conflict-enum-bool.out
TEST tests/qapi-schema/alternate-conflict-dict.out
TEST tests/qapi-schema/alternate-conflict-string.out
TEST tests/qapi-schema/alternate-conflict-enum-int.out
TEST tests/qapi-schema/alternate-conflict-bool-string.out
TEST tests/qapi-schema/alternate-conflict-num-string.out
TEST tests/qapi-schema/alternate-empty.out
TEST tests/qapi-schema/alternate-nested.out
TEST tests/qapi-schema/alternate-unknown.out
TEST tests/qapi-schema/args-alternate.out
TEST tests/qapi-schema/args-array-empty.out
TEST tests/qapi-schema/args-any.out
TEST tests/qapi-schema/args-array-unknown.out
TEST tests/qapi-schema/args-bad-boxed.out
TEST tests/qapi-schema/args-boxed-anon.out
TEST tests/qapi-schema/args-boxed-empty.out
TEST tests/qapi-schema/args-boxed-string.out
TEST tests/qapi-schema/args-int.out
TEST tests/qapi-schema/args-invalid.out
TEST tests/qapi-schema/args-member-array-bad.out
TEST tests/qapi-schema/args-member-case.out
TEST tests/qapi-schema/args-member-unknown.out
TEST tests/qapi-schema/args-name-clash.out
TEST tests/qapi-schema/args-union.out
TEST tests/qapi-schema/args-unknown.out
TEST tests/qapi-schema/bad-base.out
TEST tests/qapi-schema/bad-data.out
TEST tests/qapi-schema/bad-ident.out
TEST tests/qapi-schema/bad-type-bool.out
TEST tests/qapi-schema/bad-type-dict.out
TEST tests/qapi-schema/bad-type-int.out
TEST tests/qapi-schema/base-cycle-direct.out
TEST tests/qapi-schema/base-cycle-indirect.out
TEST tests/qapi-schema/command-int.out
TEST tests/qapi-schema/comments.out
TEST tests/qapi-schema/doc-bad-alternate-member.out
TEST tests/qapi-schema/doc-bad-command-arg.out
TEST tests/qapi-schema/doc-bad-section.out
TEST tests/qapi-schema/doc-bad-symbol.out
TEST tests/qapi-schema/doc-bad-union-member.out
TEST tests/qapi-schema/doc-before-include.out
TEST tests/qapi-schema/doc-before-pragma.out
TEST tests/qapi-schema/doc-duplicated-arg.out
TEST tests/qapi-schema/doc-duplicated-return.out
TEST tests/qapi-schema/doc-duplicated-since.out
TEST tests/qapi-schema/doc-empty-arg.out
TEST tests/qapi-schema/doc-empty-section.out
TEST tests/qapi-schema/doc-empty-symbol.out
TEST tests/qapi-schema/doc-good.out
TEST tests/qapi-schema/doc-interleaved-section.out
TEST tests/qapi-schema/doc-invalid-end.out
TEST tests/qapi-schema/doc-invalid-end2.out
TEST tests/qapi-schema/doc-invalid-return.out
TEST tests/qapi-schema/doc-invalid-section.out
TEST tests/qapi-schema/doc-invalid-start.out
TEST tests/qapi-schema/doc-missing-colon.out
TEST tests/qapi-schema/doc-missing-expr.out
TEST tests/qapi-schema/doc-missing-space.out
TEST tests/qapi-schema/doc-missing.out
TEST tests/qapi-schema/doc-no-symbol.out
TEST tests/qapi-schema/double-data.out
TEST tests/qapi-schema/double-type.out
TEST tests/qapi-schema/duplicate-key.out
TEST tests/qapi-schema/empty.out
TEST tests/qapi-schema/enum-bad-name.out
TEST tests/qapi-schema/enum-bad-prefix.out
TEST tests/qapi-schema/enum-clash-member.out
TEST tests/qapi-schema/enum-dict-member.out
TEST tests/qapi-schema/enum-int-member.out
TEST tests/qapi-schema/enum-member-case.out
TEST tests/qapi-schema/enum-missing-data.out
TEST tests/qapi-schema/enum-wrong-data.out
TEST tests/qapi-schema/escape-outside-string.out
TEST tests/qapi-schema/escape-too-big.out
TEST tests/qapi-schema/escape-too-short.out
TEST tests/qapi-schema/event-boxed-empty.out
TEST tests/qapi-schema/event-case.out
TEST tests/qapi-schema/event-nest-struct.out
TEST tests/qapi-schema/flat-union-array-branch.out
TEST tests/qapi-schema/flat-union-bad-base.out
TEST tests/qapi-schema/flat-union-bad-discriminator.out
TEST tests/qapi-schema/flat-union-base-any.out
TEST tests/qapi-schema/flat-union-base-union.out
TEST tests/qapi-schema/flat-union-clash-member.out
TEST tests/qapi-schema/flat-union-empty.out
TEST tests/qapi-schema/flat-union-incomplete-branch.out
TEST tests/qapi-schema/flat-union-inline.out
TEST tests/qapi-schema/flat-union-int-branch.out
TEST tests/qapi-schema/flat-union-invalid-branch-key.out
TEST tests/qapi-schema/flat-union-invalid-discriminator.out
TEST tests/qapi-schema/flat-union-no-base.out
TEST tests/qapi-schema/flat-union-optional-discriminator.out
TEST tests/qapi-schema/flat-union-string-discriminator.out
TEST tests/qapi-schema/funny-char.out
TEST tests/qapi-schema/ident-with-escape.out
TEST tests/qapi-schema/include-before-err.out
TEST tests/qapi-schema/include-cycle.out
TEST tests/qapi-schema/include-extra-junk.out
TEST tests/qapi-schema/include-format-err.out
TEST tests/qapi-schema/include-nested-err.out
TEST tests/qapi-schema/include-no-file.out
TEST tests/qapi-schema/include-non-file.out
TEST tests/qapi-schema/include-relpath.out
TEST tests/qapi-schema/include-repetition.out
TEST tests/qapi-schema/include-self-cycle.out
TEST tests/qapi-schema/include-simple.out
TEST tests/qapi-schema/indented-expr.out
TEST tests/qapi-schema/leading-comma-list.out
TEST tests/qapi-schema/leading-comma-object.out
TEST tests/qapi-schema/missing-comma-list.out
TEST tests/qapi-schema/missing-colon.out
TEST tests/qapi-schema/missing-comma-object.out
TEST tests/qapi-schema/missing-type.out
TEST tests/qapi-schema/nested-struct-data.out
TEST tests/qapi-schema/non-objects.out
TEST tests/qapi-schema/pragma-doc-required-crap.out
TEST tests/qapi-schema/pragma-extra-junk.out
TEST tests/qapi-schema/pragma-name-case-whitelist-crap.out
TEST tests/qapi-schema/pragma-non-dict.out
TEST tests/qapi-schema/pragma-returns-whitelist-crap.out
TEST tests/qapi-schema/qapi-schema-test.out
TEST tests/qapi-schema/quoted-structural-chars.out
TEST tests/qapi-schema/redefined-builtin.out
TEST tests/qapi-schema/redefined-command.out
TEST tests/qapi-schema/redefined-event.out
TEST tests/qapi-schema/redefined-type.out
TEST tests/qapi-schema/reserved-command-q.out
TEST tests/qapi-schema/reserved-enum-q.out
TEST tests/qapi-schema/reserved-member-has.out
TEST tests/qapi-schema/reserved-member-q.out
TEST tests/qapi-schema/reserved-member-u.out
TEST tests/qapi-schema/reserved-member-underscore.out
TEST tests/qapi-schema/reserved-type-kind.out
TEST tests/qapi-schema/reserved-type-list.out
TEST tests/qapi-schema/returns-alternate.out
TEST tests/qapi-schema/returns-array-bad.out
TEST tests/qapi-schema/returns-dict.out
TEST tests/qapi-schema/returns-unknown.out
TEST tests/qapi-schema/returns-whitelist.out
TEST tests/qapi-schema/struct-base-clash-deep.out
TEST tests/qapi-schema/struct-base-clash.out
TEST tests/qapi-schema/struct-data-invalid.out
TEST tests/qapi-schema/struct-member-invalid.out
TEST tests/qapi-schema/trailing-comma-list.out
TEST tests/qapi-schema/trailing-comma-object.out
TEST tests/qapi-schema/type-bypass-bad-gen.out
TEST tests/qapi-schema/unclosed-list.out
TEST tests/qapi-schema/unclosed-object.out
TEST tests/qapi-schema/unclosed-string.out
TEST tests/qapi-schema/unicode-str.out
TEST tests/qapi-schema/union-base-empty.out
TEST tests/qapi-schema/union-base-no-discriminator.out
TEST tests/qapi-schema/union-branch-case.out
TEST tests/qapi-schema/union-clash-branches.out
TEST tests/qapi-schema/union-empty.out
TEST tests/qapi-schema/union-invalid-base.out
TEST tests/qapi-schema/union-optional-branch.out
TEST tests/qapi-schema/union-unknown.out
TEST tests/qapi-schema/unknown-escape.out
TEST tests/qapi-schema/unknown-expr-key.out
GEN tests/qapi-schema/doc-good.test.texi
CC tests/check-qdict.o
CC tests/test-char.o
CC tests/check-qnum.o
CC tests/check-qlist.o
CC tests/check-qnull.o
CC tests/check-qstring.o
CC tests/check-qobject.o
CC tests/check-qjson.o
CC tests/check-qlit.o
CC tests/test-qobject-output-visitor.o
CC tests/test-qapi-visit.o
CC tests/test-qapi-types.o
CC tests/test-qapi-events.o
CC tests/test-qapi-introspect.o
CC tests/test-clone-visitor.o
CC tests/test-qobject-input-visitor.o
CC tests/test-qmp-cmds.o
CC tests/test-qapi-commands.o
CC tests/test-string-input-visitor.o
CC tests/test-string-output-visitor.o
CC tests/test-qmp-event.o
CC tests/test-opts-visitor.o
CC tests/test-coroutine.o
CC tests/iothread.o
CC tests/test-visitor-serialization.o
CC tests/test-iov.o
CC tests/test-aio.o
CC tests/test-aio-multithread.o
CC tests/test-throttle.o
CC tests/test-thread-pool.o
CC tests/test-hbitmap.o
CC tests/test-bdrv-drain.o
CC tests/test-blockjob.o
CC tests/test-blockjob-txn.o
CC tests/test-block-backend.o
CC tests/test-x86-cpuid.o
CC tests/test-xbzrle.o
CC tests/test-vmstate.o
CC tests/test-cutils.o
CC tests/test-shift128.o
CC tests/test-mul64.o
CC tests/test-int128.o
CC tests/rcutorture.o
CC tests/test-rcu-list.o
CC tests/test-qdist.o
CC tests/test-qht.o
CC tests/test-qht-par.o
CC tests/qht-bench.o
/tmp/qemu-test/src/tests/test-int128.c:180: warning: '__noclone__' attribute directive ignored
CC tests/test-bitops.o
CC tests/test-bitcnt.o
CC tests/check-qom-interface.o
CC tests/check-qom-proplist.o
CC tests/test-qemu-opts.o
CC tests/test-keyval.o
CC tests/test-write-threshold.o
CC tests/test-crypto-hash.o
CC tests/test-crypto-hmac.o
CC tests/test-crypto-cipher.o
CC tests/test-crypto-secret.o
CC tests/test-qga.o
CC tests/libqtest.o
CC tests/test-timed-average.o
CC tests/test-util-sockets.o
CC tests/socket-helpers.o
CC tests/test-io-task.o
CC tests/test-io-channel-socket.o
CC tests/io-channel-helpers.o
CC tests/test-io-channel-file.o
CC tests/test-io-channel-command.o
CC tests/test-io-channel-buffer.o
CC tests/test-base64.o
CC tests/test-crypto-ivgen.o
CC tests/test-crypto-xts.o
CC tests/test-crypto-afsplit.o
CC tests/test-crypto-block.o
CC tests/test-logging.o
CC tests/test-replication.o
CC tests/test-bufferiszero.o
CC tests/test-uuid.o
CC tests/ptimer-test.o
CC tests/ptimer-test-stubs.o
CC tests/test-qapi-util.o
CC tests/vhost-user-test.o
CC tests/libqos/pci.o
CC tests/libqos/fw_cfg.o
CC tests/libqos/i2c.o
CC tests/libqos/malloc.o
CC tests/libqos/malloc-spapr.o
CC tests/libqos/libqos.o
CC tests/libqos/libqos-spapr.o
CC tests/libqos/rtas.o
CC tests/libqos/pci-spapr.o
CC tests/libqos/pci-pc.o
CC tests/libqos/malloc-pc.o
CC tests/libqos/libqos-pc.o
CC tests/libqos/ahci.o
CC tests/libqos/virtio.o
CC tests/libqos/virtio-pci.o
CC tests/libqos/virtio-mmio.o
CC tests/libqos/malloc-generic.o
CC tests/endianness-test.o
CC tests/fdc-test.o
CC tests/ide-test.o
CC tests/ahci-test.o
CC tests/hd-geo-test.o
CC tests/boot-order-test.o
CC tests/bios-tables-test.o
CC tests/boot-sector.o
CC tests/acpi-utils.o
CC tests/boot-serial-test.o
CC tests/pxe-test.o
CC tests/rtc-test.o
CC tests/ipmi-kcs-test.o
CC tests/ipmi-bt-test.o
CC tests/i440fx-test.o
CC tests/fw_cfg-test.o
CC tests/drive_del-test.o
CC tests/wdt_ib700-test.o
CC tests/tco-test.o
CC tests/e1000-test.o
CC tests/e1000e-test.o
CC tests/rtl8139-test.o
CC tests/pcnet-test.o
CC tests/eepro100-test.o
CC tests/ne2000-test.o
CC tests/nvme-test.o
CC tests/ac97-test.o
CC tests/es1370-test.o
CC tests/virtio-net-test.o
CC tests/virtio-balloon-test.o
CC tests/virtio-blk-test.o
CC tests/virtio-rng-test.o
CC tests/virtio-scsi-test.o
CC tests/virtio-serial-test.o
CC tests/virtio-console-test.o
CC tests/tpci200-test.o
CC tests/ipoctal232-test.o
CC tests/display-vga-test.o
CC tests/intel-hda-test.o
CC tests/ivshmem-test.o
CC tests/megasas-test.o
CC tests/vmxnet3-test.o
CC tests/pvpanic-test.o
CC tests/i82801b11-test.o
CC tests/ioh3420-test.o
CC tests/usb-hcd-ohci-test.o
CC tests/libqos/usb.o
CC tests/usb-hcd-uhci-test.o
CC tests/usb-hcd-ehci-test.o
CC tests/usb-hcd-xhci-test.o
CC tests/cpu-plug-test.o
CC tests/q35-test.o
CC tests/vmgenid-test.o
CC tests/tpm-crb-swtpm-test.o
make: *** No rule to make target `tests/tpm-util.o', needed by `tests/tpm-crb-swtpm-test'. Stop.
make: *** Waiting for unfinished jobs....
CC tests/tpm-emu.o
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:21:22: error: tpm-util.h: No such file or directory
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c: In function 'tpm_crb_swtpm_test':
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:127: warning: implicit declaration of function 'tpm_util_swtpm_start'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:127: warning: nested extern declaration of 'tpm_util_swtpm_start'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: warning: implicit declaration of function 'tpm_util_startup'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: warning: nested extern declaration of 'tpm_util_startup'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: error: 'tpm_util_crb_transfer' undeclared (first use in this function)
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: error: (Each undeclared identifier is reported only once
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: error: for each function it appears in.)
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:141: warning: implicit declaration of function 'tpm_util_pcrextend'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:141: warning: nested extern declaration of 'tpm_util_pcrextend'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:148: warning: implicit declaration of function 'tpm_util_pcrread'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:148: warning: nested extern declaration of 'tpm_util_pcrread'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:152: warning: implicit declaration of function 'tpm_util_swtpm_kill'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:152: warning: nested extern declaration of 'tpm_util_swtpm_kill'
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c: In function 'tpm_crb_swtpm_migration_test':
/tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:186: error: 'tpm_util_crb_transfer' undeclared (first use in this function)
make: *** [tests/tpm-crb-swtpm-test.o] Error 1
Traceback (most recent call last):
File "./tests/docker/docker.py", line 407, in <module>
sys.exit(main())
File "./tests/docker/docker.py", line 404, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 261, in run
return Docker().run(argv, args.keep, quiet=args.quiet)
File "./tests/docker/docker.py", line 229, in run
quiet=quiet)
File "./tests/docker/docker.py", line 147, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['docker', 'run', '--label', 'com.qemu.instance.uuid=28e0e552296511e8af9652540069c830', '-u', '0', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/root/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-3rs5i4es/src/docker-src.2018-03-16-17.58.14.29948:/var/tmp/qemu:z,ro', 'qemu:centos6', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2
make[1]: *** [tests/docker/Makefile.include:129: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-3rs5i4es/src'
make: *** [tests/docker/Makefile.include:163: docker-run-test-quick@centos6] Error 2
real 2m9.379s
user 0m4.618s
sys 0m4.367s
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support
2018-03-16 22:00 ` [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support no-reply
@ 2018-03-16 23:26 ` Stefan Berger
0 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-03-16 23:26 UTC (permalink / raw)
To: qemu-devel; +Cc: marcandre.lureau, famz, dgilbert
On 03/16/2018 06:00 PM, no-reply@patchew.org wrote:
> Hi,
>
> This series failed docker-quick@centos6 build test. Please find the testing commands and
> their output below. If you have Docker installed, you can probably reproduce it
> locally.
>
> Type: series
> Message-id: 1521236796-24551-1-git-send-email-stefanb@linux.vnet.ibm.com
> Subject: [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support
>
>
> make: *** No rule to make target `tests/tpm-util.o', needed by `tests/tpm-crb-swtpm-test'. Stop.
> make: *** Waiting for unfinished jobs....
> CC tests/tpm-emu.o
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:21:22: error: tpm-util.h: No such file or directory
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c: In function 'tpm_crb_swtpm_test':
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:127: warning: implicit declaration of function 'tpm_util_swtpm_start'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:127: warning: nested extern declaration of 'tpm_util_swtpm_start'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: warning: implicit declaration of function 'tpm_util_startup'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: warning: nested extern declaration of 'tpm_util_startup'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: error: 'tpm_util_crb_transfer' undeclared (first use in this function)
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: error: (Each undeclared identifier is reported only once
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:140: error: for each function it appears in.)
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:141: warning: implicit declaration of function 'tpm_util_pcrextend'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:141: warning: nested extern declaration of 'tpm_util_pcrextend'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:148: warning: implicit declaration of function 'tpm_util_pcrread'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:148: warning: nested extern declaration of 'tpm_util_pcrread'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:152: warning: implicit declaration of function 'tpm_util_swtpm_kill'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:152: warning: nested extern declaration of 'tpm_util_swtpm_kill'
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c: In function 'tpm_crb_swtpm_migration_test':
> /tmp/qemu-test/src/tests/tpm-crb-swtpm-test.c:186: error: 'tpm_util_crb_transfer' undeclared (first use in this function)
Missing new files. Thanks for pointing this out. V5.1 fixes it.
Stefan
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide Stefan Berger
@ 2018-03-28 15:48 ` Marc-André Lureau
2018-03-28 21:15 ` Stefan Berger
0 siblings, 1 reply; 10+ messages in thread
From: Marc-André Lureau @ 2018-03-28 15:48 UTC (permalink / raw)
To: Stefan Berger; +Cc: QEMU, Dr. David Alan Gilbert
Hi
On Fri, Mar 16, 2018 at 10:46 PM, Stefan Berger
<stefanb@linux.vnet.ibm.com> wrote:
> Extend the docs related to TPM with specs related to VM save and
> restore and a troubleshooting guide for TPM migration.
>
Thanks a lot for writing this! some questions below
> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
> ---
> docs/specs/tpm.txt | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 106 insertions(+)
>
> diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
> index d1d7157..c230c4c 100644
> --- a/docs/specs/tpm.txt
> +++ b/docs/specs/tpm.txt
> @@ -200,3 +200,109 @@ crw-------. 1 root root 10, 224 Jul 11 10:11 /dev/tpm0
> PCR-00: 35 4E 3B CE 23 9F 38 59 ...
> ...
> PCR-23: 00 00 00 00 00 00 00 00 ...
> +
> +
> +=== Migration with the TPM emulator ===
> +
> +The TPM emulator supports the following types of virtual machine migration:
> +
> +- VM save / restore (migration into a file)
> +- Network migration
> +- Snapshotting (migration into storage like QoW2 or QED)
> +
> +The following command sequences can be used to test VM save / restore.
> +
> +
> +In a 1st terminal start an instance of a swtpm using the following command:
> +
> +mkdir /tmp/mytpm1
> +swtpm socket --tpmstate dir=/tmp/mytpm1 \
> + --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
> + --log level=20 --tpm2
> +
> +In a 2nd terminal start the VM:
> +
> +qemu-system-x86_64 -display sdl -enable-kvm \
> + -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
> + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
> + -tpmdev emulator,id=tpm0,chardev=chrtpm \
> + -device tpm-tis,tpmdev=tpm0 \
> + -monitor stdio \
> + test.img
> +
> +Verify that the attached TPM is working as expected using applications inside
> +the VM.
> +
> +To store the state of the VM use the following command in the QEMU monitor in
> +the 2nd terminal:
> +
> +(qemu) migrate "exec:cat > testvm.bin"
> +(qemu) quit
> +
> +At this point a file called 'testvm.bin' should exists and the swtpm and QEMU
> +processes should have ended.
When is swtpm ending, when qemu leaves? Hopefully you can do several
migrate commands.
> +
> +To test 'VM restore' you have to start the swtpm with the same parameters
> +as before. If previously a TPM 2 [--tpm2] was saved, --tpm2 must now be
> +passed again on the command line.
> +
> +In the 1st terminal restart the swtpm with the same command line as before:
> +
> +swtpm socket --tpmstate dir=/tmp/mytpm1 \
> + --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
> + --log level=20 --tpm2
Does that mean the tpmstate directory content must be the same and
thus migrated as well? Can in be empty in the destination? If not,
what should be done to initialize it? Could it be empty instead?
> +
> +In the 2nd terminal restore the state of the VM using the additonal
> +'-incoming' option.
> +
> +qemu-system-x86_64 -display sdl -enable-kvm \
> + -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
> + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
> + -tpmdev emulator,id=tpm0,chardev=chrtpm \
> + -device tpm-tis,tpmdev=tpm0 \
> + -incoming "exec:cat < testvm.bin" \
> + test.img
> +
> +
> +Troubleshooting migration:
> +
> +There are several reasons why migration may fail. In case of problems,
> +please ensure that the command lines adhere to the following rules and,
> +if possible, that identical versions of QEMU and swtpm are used at all
> +times.
> +
> +VM save and restore:
> + - QEMU command line parameters should be identical apart from the
> + '-incoming' option on VM restore
> + - swtpm command line parameters should be identical
> +
> +VM migration to 'localhost':
> + - QEMU command line parameters should be identical apart from the
> + '-incoming' option on the destination side
> + - swtpm command line parameters should point to two different
> + directories on the source and destination swtpm (--tpmstate dir=...)
> + (especially if different versions of libtpms were to be used on the
> + same machine).
> +
> +VM migration across the network:
> + - QEMU command line parameters should be identical apart from the
> + '-incoming' option on the destination side
> + - swtpm command line parameters should be identical
> +
> +VM Snapshotting:
> + - QEMU command line parameters should be identical
> + - swtpm command line parameters should be identical
> +
> +
> +Besides that, migration failure reasons on the swtpm level may include
> +the following:
> +
> + - the versions of the swtpm on the source and destination sides are
> + incompatible
> + - downgrading of TPM state may not be supported
> + - the source and destination libtpms were compiled with different
> + compile-time options and the destination side refuses to accept the
> + state
> + - different migration keys are used on the source and destination side
> + and the destination side cannot decrypt the migrated state
> + (swtpm ... --migration-key ... )
> --
> 2.5.5
>
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide
2018-03-28 15:48 ` Marc-André Lureau
@ 2018-03-28 21:15 ` Stefan Berger
2018-03-29 8:50 ` Dr. David Alan Gilbert
0 siblings, 1 reply; 10+ messages in thread
From: Stefan Berger @ 2018-03-28 21:15 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: QEMU, Dr. David Alan Gilbert
On 03/28/2018 11:48 AM, Marc-André Lureau wrote:
> Hi
>
> On Fri, Mar 16, 2018 at 10:46 PM, Stefan Berger
> <stefanb@linux.vnet.ibm.com> wrote:
>> Extend the docs related to TPM with specs related to VM save and
>> restore and a troubleshooting guide for TPM migration.
>>
> Thanks a lot for writing this! some questions below
>
>> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
>> ---
>> docs/specs/tpm.txt | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 106 insertions(+)
>>
>> diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
>> index d1d7157..c230c4c 100644
>> --- a/docs/specs/tpm.txt
>> +++ b/docs/specs/tpm.txt
>> @@ -200,3 +200,109 @@ crw-------. 1 root root 10, 224 Jul 11 10:11 /dev/tpm0
>> PCR-00: 35 4E 3B CE 23 9F 38 59 ...
>> ...
>> PCR-23: 00 00 00 00 00 00 00 00 ...
>> +
>> +
>> +=== Migration with the TPM emulator ===
>> +
>> +The TPM emulator supports the following types of virtual machine migration:
>> +
>> +- VM save / restore (migration into a file)
>> +- Network migration
>> +- Snapshotting (migration into storage like QoW2 or QED)
>> +
>> +The following command sequences can be used to test VM save / restore.
>> +
>> +
>> +In a 1st terminal start an instance of a swtpm using the following command:
>> +
>> +mkdir /tmp/mytpm1
>> +swtpm socket --tpmstate dir=/tmp/mytpm1 \
>> + --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
>> + --log level=20 --tpm2
>> +
>> +In a 2nd terminal start the VM:
>> +
>> +qemu-system-x86_64 -display sdl -enable-kvm \
>> + -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
>> + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
>> + -tpmdev emulator,id=tpm0,chardev=chrtpm \
>> + -device tpm-tis,tpmdev=tpm0 \
>> + -monitor stdio \
>> + test.img
>> +
>> +Verify that the attached TPM is working as expected using applications inside
>> +the VM.
>> +
>> +To store the state of the VM use the following command in the QEMU monitor in
>> +the 2nd terminal:
>> +
>> +(qemu) migrate "exec:cat > testvm.bin"
>> +(qemu) quit
>> +
>> +At this point a file called 'testvm.bin' should exists and the swtpm and QEMU
>> +processes should have ended.
> When is swtpm ending, when qemu leaves? Hopefully you can do several
> migrate commands.
Yes, QEMU does not send it the signal to shut down. We can fall back to
the source if the destination fails.
>
>> +
>> +To test 'VM restore' you have to start the swtpm with the same parameters
>> +as before. If previously a TPM 2 [--tpm2] was saved, --tpm2 must now be
>> +passed again on the command line.
>> +
>> +In the 1st terminal restart the swtpm with the same command line as before:
>> +
>> +swtpm socket --tpmstate dir=/tmp/mytpm1 \
>> + --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
>> + --log level=20 --tpm2
> Does that mean the tpmstate directory content must be the same and
> thus migrated as well? Can in be empty in the destination? If not,
> what should be done to initialize it? Could it be empty instead?
QEMU migrates the state of the TPM with the CMD_GET_STATEBLOB to
retrieve the state blobs and CMD_SET_STATEBLOB to set them on the
destination. The destination only needs to have the TPM running but the
directory must have been created (--tpmstate dir=...).
One can try this with localhost migration over the network as well, but
I didn't want to show this more complicated scenario in the doc:
destination QEMU:
sudo ./x86_64-softmmu/qemu-system-x86_64 -vnc :11 -enable-kvm -m 1024
-smp 8 -boot d -L /usr/share/seabios -bios bios-256k.bin -boot menu=on
-chardev socket,id=chrtpm,path=/tmp/mytpm2/ctrl.sock -tpmdev
emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 -monitor
stdio -chardev file,id=pts2,path=/tmp/seabios.log -device
isa-serial,chardev=pts2 /var/lib/libvirt/images/FC27 -incoming "exec:nc
-l 127.0.0.1 12345"
source QEMU:
sudo ./x86_64-softmmu/qemu-system-x86_64 -vnc :10 -enable-kvm -m 1024
-smp 8 -boot d -L /usr/share/seabios -bios bios-256k.bin -boot menu=on
-chardev socket,id=chrtpm,path=/tmp/mytpm1/ctrl.sock -tpmdev
emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 -monitor
stdio -chardev file,id=pts2,path=/tmp/seabios.log -device
isa-serial,chardev=pts2 /var/lib/libvirt/images/FC27
(qemu) migrate "exec:nc 127.0.0.1 12345"
Just tested again.
Stefan
>> +
>> +In the 2nd terminal restore the state of the VM using the additonal
>> +'-incoming' option.
>> +
>> +qemu-system-x86_64 -display sdl -enable-kvm \
>> + -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
>> + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
>> + -tpmdev emulator,id=tpm0,chardev=chrtpm \
>> + -device tpm-tis,tpmdev=tpm0 \
>> + -incoming "exec:cat < testvm.bin" \
>> + test.img
>> +
>> +
>> +Troubleshooting migration:
>> +
>> +There are several reasons why migration may fail. In case of problems,
>> +please ensure that the command lines adhere to the following rules and,
>> +if possible, that identical versions of QEMU and swtpm are used at all
>> +times.
>> +
>> +VM save and restore:
>> + - QEMU command line parameters should be identical apart from the
>> + '-incoming' option on VM restore
>> + - swtpm command line parameters should be identical
>> +
>> +VM migration to 'localhost':
>> + - QEMU command line parameters should be identical apart from the
>> + '-incoming' option on the destination side
>> + - swtpm command line parameters should point to two different
>> + directories on the source and destination swtpm (--tpmstate dir=...)
>> + (especially if different versions of libtpms were to be used on the
>> + same machine).
>> +
>> +VM migration across the network:
>> + - QEMU command line parameters should be identical apart from the
>> + '-incoming' option on the destination side
>> + - swtpm command line parameters should be identical
>> +
>> +VM Snapshotting:
>> + - QEMU command line parameters should be identical
>> + - swtpm command line parameters should be identical
>> +
>> +
>> +Besides that, migration failure reasons on the swtpm level may include
>> +the following:
>> +
>> + - the versions of the swtpm on the source and destination sides are
>> + incompatible
>> + - downgrading of TPM state may not be supported
>> + - the source and destination libtpms were compiled with different
>> + compile-time options and the destination side refuses to accept the
>> + state
>> + - different migration keys are used on the source and destination side
>> + and the destination side cannot decrypt the migrated state
>> + (swtpm ... --migration-key ... )
>> --
>> 2.5.5
>>
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide
2018-03-28 21:15 ` Stefan Berger
@ 2018-03-29 8:50 ` Dr. David Alan Gilbert
0 siblings, 0 replies; 10+ messages in thread
From: Dr. David Alan Gilbert @ 2018-03-29 8:50 UTC (permalink / raw)
To: Stefan Berger; +Cc: Marc-André Lureau, QEMU
* Stefan Berger (stefanb@linux.vnet.ibm.com) wrote:
> On 03/28/2018 11:48 AM, Marc-André Lureau wrote:
> > Hi
> >
> > On Fri, Mar 16, 2018 at 10:46 PM, Stefan Berger
> > <stefanb@linux.vnet.ibm.com> wrote:
> > > Extend the docs related to TPM with specs related to VM save and
> > > restore and a troubleshooting guide for TPM migration.
> > >
> > Thanks a lot for writing this! some questions below
> >
> > > Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
> > > ---
> > > docs/specs/tpm.txt | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 106 insertions(+)
> > >
> > > diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
> > > index d1d7157..c230c4c 100644
> > > --- a/docs/specs/tpm.txt
> > > +++ b/docs/specs/tpm.txt
> > > @@ -200,3 +200,109 @@ crw-------. 1 root root 10, 224 Jul 11 10:11 /dev/tpm0
> > > PCR-00: 35 4E 3B CE 23 9F 38 59 ...
> > > ...
> > > PCR-23: 00 00 00 00 00 00 00 00 ...
> > > +
> > > +
> > > +=== Migration with the TPM emulator ===
> > > +
> > > +The TPM emulator supports the following types of virtual machine migration:
> > > +
> > > +- VM save / restore (migration into a file)
> > > +- Network migration
> > > +- Snapshotting (migration into storage like QoW2 or QED)
> > > +
> > > +The following command sequences can be used to test VM save / restore.
> > > +
> > > +
> > > +In a 1st terminal start an instance of a swtpm using the following command:
> > > +
> > > +mkdir /tmp/mytpm1
> > > +swtpm socket --tpmstate dir=/tmp/mytpm1 \
> > > + --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
> > > + --log level=20 --tpm2
> > > +
> > > +In a 2nd terminal start the VM:
> > > +
> > > +qemu-system-x86_64 -display sdl -enable-kvm \
> > > + -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
> > > + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
> > > + -tpmdev emulator,id=tpm0,chardev=chrtpm \
> > > + -device tpm-tis,tpmdev=tpm0 \
> > > + -monitor stdio \
> > > + test.img
> > > +
> > > +Verify that the attached TPM is working as expected using applications inside
> > > +the VM.
> > > +
> > > +To store the state of the VM use the following command in the QEMU monitor in
> > > +the 2nd terminal:
> > > +
> > > +(qemu) migrate "exec:cat > testvm.bin"
> > > +(qemu) quit
> > > +
> > > +At this point a file called 'testvm.bin' should exists and the swtpm and QEMU
> > > +processes should have ended.
> > When is swtpm ending, when qemu leaves? Hopefully you can do several
> > migrate commands.
>
> Yes, QEMU does not send it the signal to shut down. We can fall back to the
> source if the destination fails.
>
> >
> > > +
> > > +To test 'VM restore' you have to start the swtpm with the same parameters
> > > +as before. If previously a TPM 2 [--tpm2] was saved, --tpm2 must now be
> > > +passed again on the command line.
> > > +
> > > +In the 1st terminal restart the swtpm with the same command line as before:
> > > +
> > > +swtpm socket --tpmstate dir=/tmp/mytpm1 \
> > > + --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
> > > + --log level=20 --tpm2
> > Does that mean the tpmstate directory content must be the same and
> > thus migrated as well? Can in be empty in the destination? If not,
> > what should be done to initialize it? Could it be empty instead?
>
> QEMU migrates the state of the TPM with the CMD_GET_STATEBLOB to retrieve
> the state blobs and CMD_SET_STATEBLOB to set them on the destination. The
> destination only needs to have the TPM running but the directory must have
> been created (--tpmstate dir=...).
>
> One can try this with localhost migration over the network as well, but I
> didn't want to show this more complicated scenario in the doc:
>
> destination QEMU:
> sudo ./x86_64-softmmu/qemu-system-x86_64 -vnc :11 -enable-kvm -m 1024 -smp 8
> -boot d -L /usr/share/seabios -bios bios-256k.bin -boot menu=on -chardev
> socket,id=chrtpm,path=/tmp/mytpm2/ctrl.sock -tpmdev
> emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 -monitor stdio
> -chardev file,id=pts2,path=/tmp/seabios.log -device isa-serial,chardev=pts2
> /var/lib/libvirt/images/FC27 -incoming "exec:nc -l 127.0.0.1 12345"
>
> source QEMU:
> sudo ./x86_64-softmmu/qemu-system-x86_64 -vnc :10 -enable-kvm -m 1024 -smp 8
> -boot d -L /usr/share/seabios -bios bios-256k.bin -boot menu=on -chardev
> socket,id=chrtpm,path=/tmp/mytpm1/ctrl.sock -tpmdev
> emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 -monitor stdio
> -chardev file,id=pts2,path=/tmp/seabios.log -device isa-serial,chardev=pts2
> /var/lib/libvirt/images/FC27
>
> (qemu) migrate "exec:nc 127.0.0.1 12345"
Migration has a tcp form that's a bit easier;
-incoming tcp:127.0.0.1:12345
migrate tcp:127.0.0.1:12345
Dave
> Just tested again.
>
> Stefan
>
>
> > > +
> > > +In the 2nd terminal restore the state of the VM using the additonal
> > > +'-incoming' option.
> > > +
> > > +qemu-system-x86_64 -display sdl -enable-kvm \
> > > + -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
> > > + -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
> > > + -tpmdev emulator,id=tpm0,chardev=chrtpm \
> > > + -device tpm-tis,tpmdev=tpm0 \
> > > + -incoming "exec:cat < testvm.bin" \
> > > + test.img
> > > +
> > > +
> > > +Troubleshooting migration:
> > > +
> > > +There are several reasons why migration may fail. In case of problems,
> > > +please ensure that the command lines adhere to the following rules and,
> > > +if possible, that identical versions of QEMU and swtpm are used at all
> > > +times.
> > > +
> > > +VM save and restore:
> > > + - QEMU command line parameters should be identical apart from the
> > > + '-incoming' option on VM restore
> > > + - swtpm command line parameters should be identical
> > > +
> > > +VM migration to 'localhost':
> > > + - QEMU command line parameters should be identical apart from the
> > > + '-incoming' option on the destination side
> > > + - swtpm command line parameters should point to two different
> > > + directories on the source and destination swtpm (--tpmstate dir=...)
> > > + (especially if different versions of libtpms were to be used on the
> > > + same machine).
> > > +
> > > +VM migration across the network:
> > > + - QEMU command line parameters should be identical apart from the
> > > + '-incoming' option on the destination side
> > > + - swtpm command line parameters should be identical
> > > +
> > > +VM Snapshotting:
> > > + - QEMU command line parameters should be identical
> > > + - swtpm command line parameters should be identical
> > > +
> > > +
> > > +Besides that, migration failure reasons on the swtpm level may include
> > > +the following:
> > > +
> > > + - the versions of the swtpm on the source and destination sides are
> > > + incompatible
> > > + - downgrading of TPM state may not be supported
> > > + - the source and destination libtpms were compiled with different
> > > + compile-time options and the destination side refuses to accept the
> > > + state
> > > + - different migration keys are used on the source and destination side
> > > + and the destination side cannot decrypt the migrated state
> > > + (swtpm ... --migration-key ... )
> > > --
> > > 2.5.5
> > >
> >
> >
> >
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-03-29 8:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-16 21:46 [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 1/4] tpm: extend TPM emulator " Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 2/4] tpm: extend TPM TIS " Stefan Berger
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 3/4] docs: tpm: add VM save/restore example and troubleshooting guide Stefan Berger
2018-03-28 15:48 ` Marc-André Lureau
2018-03-28 21:15 ` Stefan Berger
2018-03-29 8:50 ` Dr. David Alan Gilbert
2018-03-16 21:46 ` [Qemu-devel] [PATCH v5 for 2.13 4/4] tpm: Add test cases that uses the external swtpm with CRB interface Stefan Berger
2018-03-16 22:00 ` [Qemu-devel] [PATCH v5 for 2.13 0/4] tpm: Extend TPM with state migration support no-reply
2018-03-16 23:26 ` Stefan Berger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.