[DVB] Problems with TerraTec Cinergy T USB XE (af9005, mt2060 problem?)

* [DVB] Problems with TerraTec Cinergy T USB XE (af9005, mt2060 problem?)
@ 2009-09-03 13:12 Andreas Golat
  0 siblings, 0 replies; 2+ messages in thread
From: Andreas Golat @ 2009-09-03 13:12 UTC (permalink / raw)
  To: linux-media

[-- Attachment #1: Type: text/plain, Size: 2315 bytes --]

Hello,

I have some trouble with a Cinergy T USB XE stick. As I saw a lot of people
saying, it runs, so I thought it could be a problem that should be reported.

I'm runnung opensuse 11.1 (2.6.27.29) with the newest v4l-driver, downloaded
some minutes ago with mercurial. The firmware is from http://ventoso.org/luca/af9005/ (tried both)

After inserting the stick I get the following message:
---
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usb 6-1: New USB device found, idVendor=0ccd, idProduct=0055
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Cinergy T USB XE
usb 6-1: Manufacturer: AFA
dvb-usb: found a 'TerraTec Cinergy T USB XE' in cold state, will try to load a firmware
firmware: requesting af9005.fw
dvb-usb: downloading firmware from file 'af9005.fw'
dvb-usb: found a 'TerraTec Cinergy T USB XE' in warm state.
dvb-usb: will use the device's hardware PID filter (table count: 32).
DVB: registering new adapter (TerraTec Cinergy T USB XE)
DVB: registering adapter 0 frontend 0 (AF9005 USB DVB-T)...
dvb-usb: TerraTec Cinergy T USB XE successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9005
---

After starting kaffeine I first get this message from the tuner:
---
MT2060: successfully identified (IF1 = 1228)
---

After some seconds (kaffeine says nothing - no screen, nothing) I get
the errormessage in the file kernelmessage-after-kaffeine.txt / or
http://pastebin.com/m7c7257a6

Then the dvb-stuff seems to hang. Cant reconnect or unload the driver.
After disconnecting the stick I get the message in the file 
kernelmessage-after-disconnect.txt / or http://pastebin.com/m35b32ad7

After a reboot I also tried to test the stick with "scan -c" but I get the message:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.

Someone can help me?  Is it a problem with the drvier or perhaps something else?

Regards - Andr.

______________________________________________________
GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://movieflat.web.de

[-- Attachment #2: kernelmessage-after-disconnect.txt --]
[-- Type: application/octet-stream, Size: 3800 bytes --]

usb 6-1: USB disconnect, address 2
general protection fault: 0000 [2] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
CPU 0
Modules linked in: mt2060(N) hso(N) rfkill usb_storage dvb_usb_af9005_remote(N) dvb_usb_af9005(N) dvb_usb(N) dvb_core(N) i2c_core xt_tcpudp xt_pkttype ipt_LOG xt_limit i915 drm snd_pcm_oss snd_mixer_oss binfmt_misc snd_seq snd_seq_device xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter nf_conntrack_netbios_ns cpufreq_conservative nf_conntrack_ipv4 cpufreq_userspace cpufreq_powersave nf_conntrack ip_tables acpi_cpufreq ip6_tables x_tables microcode fuse dm_crypt loop dm_mod ide_cs arc4 ecb crypto_blkcipher pata_pcmcia iwlagn(N) iwlcore(N) led_class pcmcia snd_hda_intel mac80211(N) snd_pcm ppdev sdhci_pci ohci1394 video yenta_socket ricoh_mmc parport_pc cfg80211(N) sdhci snd_timer ieee1394 output irda iTCO_wdt mmc_core wmi rfkill_backport(N) sr_mod serio_raw joydev container button battery ac snd_page_alloc rsrc_nonstatic iTCO_vendor_support snd_hwdep rtc_cmos e1000e parport pcmcia_core rtc_core snd rtc_lib crc_ccitt sg pcspkr cdrom soundcore intel_agp sd_mod crc_t10dif ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan ide_pci_generic piix ide_core ata_generic ata_piix thermal processor thermal_sys hwmon ahci libata scsi_mod dock
Supported: No
Pid: 285, comm: khubd Tainted: G      D   2.6.27.29-0.1-default #1
RIP: 0010:[<ffffffff80235d22>]  [<ffffffff80235d22>] try_to_wake_up+0x4b/0x249
RSP: 0018:ffff88007d0b5ad0  EFLAGS: 00010202
RAX: 3d3d3d3d3d3d3d3d RBX: ffff88005298a380 RCX: 0000000000000000
RDX: ffffffff80a43080 RSI: 000000000000000f RDI: ffff88005298a380
RBP: ffff88007d0b5b10 R08: 0000000000000000 R09: ffff88007d0b5bb0
R10: 0000000000000000 R11: ffffffffa04eae38 R12: 0000000000000001
R13: 000000000000000f R14: ffffffffa04eae38 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff80a43080(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00007fcee138b000 CR3: 0000000062423000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process khubd (pid: 285, threadinfo ffff88007d0b4000, task ffff88007d008440)
Stack:  ffff88007d0b5b20 0000000080000000 ffff88007d0df448 ffff88005298a390
 0000000000000001 ffff88006903e648 ffffffffa04eae38 0000000000000000
 ffff88005298a380 ffffffff8024fabd ffff880055c30150 ffff8800558d3000
Call Trace:
 [<ffffffff8024fabd>] kthread_stop+0x42/0x83
 [<ffffffffa04ca379>] dvb_frontend_stop+0x44/0x94 [dvb_core]
 [<ffffffffa04ca40b>] dvb_unregister_frontend+0x42/0xee [dvb_core]
 [<ffffffffa04dde39>] dvb_usb_adapter_frontend_exit+0x15/0x25 [dvb_usb]
 [<ffffffffa04dd3e8>] dvb_usb_exit+0x54/0xde [dvb_usb]
 [<ffffffffa04dd4af>] dvb_usb_device_exit+0x3d/0x4f [dvb_usb]
 [<ffffffffa00ffbd5>] usb_unbind_interface+0x5c/0xb7 [usbcore]
 [<ffffffff803e6c01>] __device_release_driver+0x95/0xba
 [<ffffffff803e6cf2>] device_release_driver+0x21/0x2d
 [<ffffffff803e6264>] bus_remove_device+0xeb/0x115
 [<ffffffff803e4800>] device_del+0x12b/0x1bb
 [<ffffffffa00fcfe9>] usb_disable_device+0x151/0x1d5 [usbcore]
 [<ffffffffa00f88a9>] usb_disconnect+0x133/0x1e3 [usbcore]
 [<ffffffffa00f8f87>] hub_port_connect_change+0x1c5/0x8b7 [usbcore]
 [<ffffffffa00f9d1f>] hub_events+0x6a6/0x8a3 [usbcore]
 [<ffffffffa00f9f4a>] hub_thread+0x2e/0x1a0 [usbcore]
 [<ffffffff8024fa4f>] kthread+0x47/0x73
 [<ffffffff8020cf79>] child_rip+0xa/0x11

Code: 15 c4 9b 72 00 f6 c2 40 44 0f 44 f8 80 e6 08 74 4a 48 8b 15 39 81 69 00 48 8b 47 08 65 8b 0c 25 24 00 00 00 48 63 c9 48 8b 14 ca <8b> 70 1c 48 c7 c0 80 36 a3 80 48 03 42 08 48 8b b8 38 08 00 00
RIP  [<ffffffff80235d22>] try_to_wake_up+0x4b/0x249
 RSP <ffff88007d0b5ad0>
---[ end trace ef8b3c4ca44a1a60 ]---

[-- Attachment #3: kernelmessage-after-kaffeine.txt --]
[-- Type: application/octet-stream, Size: 3302 bytes --]

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: [<ffffffffa051f1ec>] mt2060_set_params+0x40/0x2b3 [mt2060]
PGD 7c01f067 PUD 7c0b5067 PMD 0
Oops: 0000 [1] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
CPU 0
Modules linked in: mt2060(N) hso(N) rfkill usb_storage dvb_usb_af9005_remote(N) dvb_usb_af9005(N) dvb_usb(N) dvb_core(N) i2c_core xt_tcpudp xt_pkttype ipt_LOG xt_limit i915 drm snd_pcm_oss snd_mixer_oss binfmt_misc snd_seq snd_seq_device xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter nf_conntrack_netbios_ns cpufreq_conservative nf_conntrack_ipv4 cpufreq_userspace cpufreq_powersave nf_conntrack ip_tables acpi_cpufreq ip6_tables x_tables microcode fuse dm_crypt loop dm_mod ide_cs arc4 ecb crypto_blkcipher pata_pcmcia iwlagn(N) iwlcore(N) led_class pcmcia snd_hda_intel mac80211(N) snd_pcm ppdev sdhci_pci ohci1394 video yenta_socket ricoh_mmc parport_pc cfg80211(N) sdhci snd_timer ieee1394 output irda iTCO_wdt mmc_core wmi rfkill_backport(N) sr_mod serio_raw joydev container button battery ac snd_page_alloc rsrc_nonstatic iTCO_vendor_support snd_hwdep rtc_cmos e1000e parport pcmcia_core rtc_core snd rtc_lib crc_ccitt sg pcspkr cdrom soundcore intel_agp sd_mod crc_t10dif ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan ide_pci_generic piix ide_core ata_generic ata_piix thermal processor thermal_sys hwmon ahci libata scsi_mod dock
Supported: No
Pid: 5050, comm: kdvb-ad-0-fe-0 Tainted: G          2.6.27.29-0.1-default #1
RIP: 0010:[<ffffffffa051f1ec>]  [<ffffffffa051f1ec>] mt2060_set_params+0x40/0x2b3 [mt2060]
RSP: 0018:ffff88005298dd80  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8800558d3c50 RCX: ffff88005298dda0
RDX: 00000002000000c0 RSI: ffff88005298dcaf RDI: ffff88006903ed30
RBP: 000000000000a304 R08: ffff88005298c000 R09: ffff88000103f720
R10: 0000000000000000 R11: 00000000ffffc780 R12: 0000000000000000
R13: ffff8800558d3c00 R14: ffffffffa04e7c5a R15: ffff8800559a9aa0
FS:  0000000000000000(0000) GS:ffffffff80a43080(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000007cc6f000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kdvb-ad-0-fe-0 (pid: 5050, threadinfo ffff88005298c000, task ffff88005298a380)
Stack:  ffff0001000100c0 ffff8800559a9aba ffff8800559a9aa0 000004cca051f61f
 000000000000ff0c 0000000000000000 63ce8800558d3c00 00000000000000cc
 000000000000a304 0000000000000000 ffff8800558d3c00 ffffffffa04e7c5a
Call Trace:
 [<ffffffffa04e761a>] af9005_fe_init+0x80f/0x855 [dvb_usb_af9005]
 [<ffffffffa04ddf95>] dvb_usb_fe_wakeup+0x32/0x38 [dvb_usb]
 [<ffffffffa04c9e6b>] dvb_frontend_init+0x3e/0x81 [dvb_core]
 [<ffffffffa04cac59>] dvb_frontend_thread+0x83/0x62c [dvb_core]
 [<ffffffff8024fa4f>] kthread+0x47/0x73
 [<ffffffff8020cf79>] child_rip+0xa/0x11

Code: 48 83 ec 38 4c 8b bf d0 02 00 00 48 8d 74 24 20 41 0f b7 47 18 4c 89 ff c6
44 24 20 0c c6 44 24 21 ff 89 44 24 1c e8 51 fe ff ff <41> 8b 14 24 b9 e8 03 00
00 89
 d0 31 d2 f7 f1 89 c5 31 c0 83 bb
RIP  [<ffffffffa051f1ec>] mt2060_set_params+0x40/0x2b3 [mt2060]
 RSP <ffff88005298dd80>
CR2: 0000000000000000
---[ end trace ef8b3c4ca44a1a60 ]---

^ permalink raw reply	[flat|nested] 2+ messages in thread