* [U-Boot] [PULL] [Update] Please pull u-boot-imx
@ 2018-03-09 12:10 Stefano Babic
2018-03-09 20:42 ` Tom Rini
0 siblings, 1 reply; 5+ messages in thread
From: Stefano Babic @ 2018-03-09 12:10 UTC (permalink / raw)
To: u-boot
Hi Tom,
as discussed: this contains two fixes that should go into release - thanks !
The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 314d9f7e3eff41873011d9a0687f469680a00074:
imx: syscounter: make sure asm is volatile (2018-03-09 13:06:14 +0100)
----------------------------------------------------------------
Fabio Estevam (1):
imximage: Remove failure when no IVT offset is found
Yasushi SHOJI (1):
imx: syscounter: make sure asm is volatile
arch/arm/mach-imx/syscounter.c | 4 ++--
tools/imximage.c | 5 -----
2 files changed, 2 insertions(+), 7 deletions(-)
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PULL] [Update] Please pull u-boot-imx
2018-03-09 12:10 [U-Boot] [PULL] [Update] Please pull u-boot-imx Stefano Babic
@ 2018-03-09 20:42 ` Tom Rini
2018-03-09 21:20 ` Stefano Babic
0 siblings, 1 reply; 5+ messages in thread
From: Tom Rini @ 2018-03-09 20:42 UTC (permalink / raw)
To: u-boot
On Fri, Mar 09, 2018 at 01:10:53PM +0100, Stefano Babic wrote:
> Hi Tom,
>
> as discussed: this contains two fixes that should go into release - thanks !
>
>
> The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
>
> Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 314d9f7e3eff41873011d9a0687f469680a00074:
>
> imx: syscounter: make sure asm is volatile (2018-03-09 13:06:14 +0100)
>
Note that I expect another PR with other fixes that just got posted
today, but, applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180309/86651b90/attachment.sig>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PULL] [Update] Please pull u-boot-imx
2018-03-09 20:42 ` Tom Rini
@ 2018-03-09 21:20 ` Stefano Babic
2018-03-10 0:52 ` Fabio Estevam
0 siblings, 1 reply; 5+ messages in thread
From: Stefano Babic @ 2018-03-09 21:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
On 09/03/2018 21:42, Tom Rini wrote:
> On Fri, Mar 09, 2018 at 01:10:53PM +0100, Stefano Babic wrote:
>
>> Hi Tom,
>>
>> as discussed: this contains two fixes that should go into release - thanks !
>>
>>
>> The following changes since commit 5e62f828256d66e2b28def4f9ef20a2a05c2d04f:
>>
>> Prepare v2018.03-rc4 (2018-03-05 20:27:08 -0500)
>>
>> are available in the git repository at:
>>
>> git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 314d9f7e3eff41873011d9a0687f469680a00074:
>>
>> imx: syscounter: make sure asm is volatile (2018-03-09 13:06:14 +0100)
>>
>
> Note that I expect another PR with other fixes that just got posted
> today, but, applied to u-boot/master, thanks!
Yes, I saw Brian's post for HAB, and there are a couple from Jagan that
I'll pick up. I will send a new PR, then.
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PULL] [Update] Please pull u-boot-imx
2018-03-09 21:20 ` Stefano Babic
@ 2018-03-10 0:52 ` Fabio Estevam
0 siblings, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2018-03-10 0:52 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Fri, Mar 9, 2018 at 6:20 PM, Stefano Babic <sbabic@denx.de> wrote:
> Yes, I saw Brian's post for HAB, and there are a couple from Jagan that
> I'll pick up. I will send a new PR, then.
Patches 1/3 and 2/3 from Bryan look good.
We have some concerns about patch 3/3 and Breno will reply to this patch soon.
Thanks
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PULL][Update] Please pull u-boot-imx
2018-02-24 15:58 [U-Boot] [PULL] " Stefano Babic
@ 2018-02-24 18:39 ` Stefano Babic
0 siblings, 0 replies; 5+ messages in thread
From: Stefano Babic @ 2018-02-24 18:39 UTC (permalink / raw)
To: u-boot
On 24/02/2018 16:58, Stefano Babic wrote:
> Hi Tom,
>
> some fixes, please pull from u-boot-imx, thanks!
>
Two fixes (Jagan's and Fabio's) were missing, new PR includes them:
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 0339086bd9b99ae354c26e8758d5bab51ef84a3a:
imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak
spl_boot_mode() function" (2018-02-24 19:33:32 +0100)
----------------------------------------------------------------
Breno Lima (2):
imx: hab: Keep CAAM clock enabled after authenticating additional
images
arm: imx: hab: Define HAB_RVT_BASE according to the processor version
Fabio Estevam (2):
mx6sabresd: Select the CONFIG_EFI_PARTITION option
imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak
spl_boot_mode() function"
Jagan Teki (4):
imx6ul: engicam: Drop isiot-mmc defconfig
imx6: engicam: Drop SPL_EXT_SUPPORT
imx6q: engicam: Use SPL_LOAD_FIT for MMC boards
ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPL
Maxim Yu. Osipov (1):
Revert "mx6: ddr: Allow changing REFSEL and REFR fields"
Stefano Babic (1):
mx6: fix MAINTAINERS for Engicam i.CoreM6 1.5 MIPI
Utkarsh Gupta (3):
imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB
authenticate function.
imx: hab: Check if CSF is valid before authenticating image
imx: hab: Check if CSF contains deprecated commands
arch/arm/dts/Makefile | 1 -
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 2 ++
arch/arm/dts/imx6ul-isiot-mmc.dts |
50 --------------------------------------------
arch/arm/include/asm/mach-imx/hab.h |
27 +++++++++++++++++-------
arch/arm/mach-imx/hab.c |
220
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------------------------
arch/arm/mach-imx/mx6/Kconfig | 1 -
arch/arm/mach-imx/spl.c |
23 +++++++++++++++++++++
board/compulab/cm_fx6/spl.c | 2 --
board/engicam/imx6q/MAINTAINERS |
8 +++++++-
board/engicam/imx6ul/MAINTAINERS | 1 -
configs/imx6dl_icore_nand_defconfig |
47 ++++++++++++++++++++++++++++++++++++++++++
configs/{imx6ul_isiot_mmc_defconfig => imx6q_icore_nand_defconfig} |
23 ++++++++++++---------
configs/imx6qdl_icore_mipi_defconfig | 2 +-
configs/imx6qdl_icore_mmc_defconfig | 2 +-
configs/imx6qdl_icore_rqs_defconfig | 2 +-
configs/imx6ul_geam_mmc_defconfig | 1 -
configs/imx6ul_isiot_emmc_defconfig |
3 ++-
configs/mx6sabresd_defconfig | 1 +
18 files changed, 237 insertions(+), 179 deletions(-)
delete mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
create mode 100644 configs/imx6dl_icore_nand_defconfig
rename configs/{imx6ul_isiot_mmc_defconfig =>
imx6q_icore_nand_defconfig} (64%)
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-03-10 0:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-09 12:10 [U-Boot] [PULL] [Update] Please pull u-boot-imx Stefano Babic
2018-03-09 20:42 ` Tom Rini
2018-03-09 21:20 ` Stefano Babic
2018-03-10 0:52 ` Fabio Estevam
-- strict thread matches above, loose matches on Subject: below --
2018-02-24 15:58 [U-Boot] [PULL] " Stefano Babic
2018-02-24 18:39 ` [U-Boot] [PULL][Update] " Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.