All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X
       [not found] <1372432721-1406-1-git-send-email-atenart@adeneo-embedded.com>
@ 2013-06-28 15:18 ` TENART Antoine
  2013-06-28 18:34   ` Wolfgang Denk
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 2/3] Add TI816X support TENART Antoine
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 3/3] Add TI816X evm board support TENART Antoine
  2 siblings, 1 reply; 6+ messages in thread
From: TENART Antoine @ 2013-06-28 15:18 UTC (permalink / raw)
  To: u-boot

Rename some CONFIG_TI814X to a more generic CONFIG_81XX

Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
---
 Makefile                                |    2 +-
 arch/arm/cpu/armv7/Makefile             |    2 +-
 arch/arm/cpu/armv7/omap-common/Makefile |    2 +-
 arch/arm/include/asm/arch-am33xx/cpu.h  |    2 +-
 arch/arm/include/asm/arch-am33xx/omap.h |    2 +-
 drivers/serial/ns16550.c                |    4 ++--
 spl/Makefile                            |    2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/Makefile b/Makefile
index fdaddb9..2224393 100644
--- a/Makefile
+++ b/Makefile
@@ -337,7 +337,7 @@ LIBS-y += api/libapi.o
 LIBS-y += post/libpost.o
 LIBS-y += test/libtest.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI81XX),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 7a8c2d0..415ace8 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,7 @@ COBJS	+= cache_v7.o
 COBJS	+= cpu.o
 COBJS	+= syslib.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX),)
 SOBJS	+= lowlevel_init.o
 endif
 
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index c4b9809..20586d3 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -37,7 +37,7 @@ COBJS	+= vc.o
 COBJS	+= abb.o
 endif
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI81XX),)
 COBJS	+= boot-common.o
 SOBJS	+= lowlevel_init.o
 endif
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 3d3a7c8..13c0667 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -54,7 +54,7 @@
 /* Reset control */
 #ifdef CONFIG_AM33XX
 #define PRM_RSTCTRL			(PRCM_BASE + 0x0F00)
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
 #define PRM_RSTCTRL			(PRCM_BASE + 0x00A0)
 #endif
 #define PRM_RSTST			(PRM_RSTCTRL + 8)
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index e7576c1..777a456 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -32,7 +32,7 @@
 #define NON_SECURE_SRAM_START	0x402F0400
 #define NON_SECURE_SRAM_END	0x40310000
 #define SRAM_SCRATCH_SPACE_ADDR	0x4030C000
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000
 #define SRAM_SCRATCH_SPACE_ADDR	0x4031B800
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index d77c25f..d659eb0 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -57,7 +57,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
-			defined(CONFIG_AM33XX) || defined(CONFIG_TI814X)
+			defined(CONFIG_AM33XX) || defined(CONFIG_TI81XX)
 	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
 	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
@@ -72,7 +72,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	serial_out(UART_LCRVAL, &com_port->lcr);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
 	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
-	defined(CONFIG_TI814X)
+	defined(CONFIG_TI81XX)
 
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);
diff --git a/spl/Makefile b/spl/Makefile
index 01873de..6a91239 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -84,7 +84,7 @@ LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
 LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
 
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI81XX),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v5 2/3] Add TI816X support
       [not found] <1372432721-1406-1-git-send-email-atenart@adeneo-embedded.com>
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X TENART Antoine
@ 2013-06-28 15:18 ` TENART Antoine
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 3/3] Add TI816X evm board support TENART Antoine
  2 siblings, 0 replies; 6+ messages in thread
From: TENART Antoine @ 2013-06-28 15:18 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
---
 arch/arm/cpu/armv7/am33xx/Makefile                 |    1 +
 arch/arm/cpu/armv7/am33xx/clock_ti814x.c           |   95 -----
 arch/arm/cpu/armv7/am33xx/clock_ti816x.c           |  445 ++++++++++++++++++++
 arch/arm/cpu/armv7/am33xx/emif4.c                  |    2 +
 arch/arm/include/asm/arch-am33xx/clock.h           |    4 +
 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h    |  142 +++++++
 arch/arm/include/asm/arch-am33xx/ddr_defs.h        |   35 +-
 arch/arm/include/asm/arch-am33xx/hardware.h        |   10 +-
 arch/arm/include/asm/arch-am33xx/hardware_am33xx.h |    6 +
 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h |    6 +
 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h |   57 +++
 arch/arm/include/asm/arch-am33xx/mmc_host_def.h    |    3 +
 arch/arm/include/asm/arch-am33xx/mux.h             |    2 +
 arch/arm/include/asm/arch-am33xx/mux_ti816x.h      |  363 ++++++++++++++++
 arch/arm/include/asm/arch-am33xx/spl.h             |   11 +-
 15 files changed, 1065 insertions(+), 117 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti816x.c
 create mode 100644 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
 create mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
 create mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti816x.h

diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index f4ccd2a..8cb7efb 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -18,6 +18,7 @@ LIB	= $(obj)lib$(SOC).o
 
 COBJS-$(CONFIG_AM33XX)	+= clock_am33xx.o
 COBJS-$(CONFIG_TI814X)	+= clock_ti814x.o
+COBJS-$(CONFIG_TI816X)	+= clock_ti816x.o
 COBJS-$(CONFIG_AM33XX)	+= clock.o
 COBJS	+= sys_info.o
 COBJS	+= mem.o
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index ca7d7ad..17913e7 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -108,103 +108,8 @@ struct ad_pll {
 
 #define OSC_SRC_CTRL			(PLL_SUBSYS_BASE + 0x2C0)
 
-/* PRCM */
 #define ENET_CLKCTRL_CMPL		0x30000
 
-#define CM_DEFAULT_BASE			(PRCM_BASE + 0x0500)
-
-struct cm_def {
-	unsigned int resv0[2];
-	unsigned int l3fastclkstctrl;
-	unsigned int resv1[1];
-	unsigned int pciclkstctrl;
-	unsigned int resv2[1];
-	unsigned int ducaticlkstctrl;
-	unsigned int resv3[1];
-	unsigned int emif0clkctrl;
-	unsigned int emif1clkctrl;
-	unsigned int dmmclkctrl;
-	unsigned int fwclkctrl;
-	unsigned int resv4[10];
-	unsigned int usbclkctrl;
-	unsigned int resv5[1];
-	unsigned int sataclkctrl;
-	unsigned int resv6[4];
-	unsigned int ducaticlkctrl;
-	unsigned int pciclkctrl;
-};
-
-#define CM_ALWON_BASE			(PRCM_BASE + 0x1400)
-
-struct cm_alwon {
-	unsigned int l3slowclkstctrl;
-	unsigned int ethclkstctrl;
-	unsigned int l3medclkstctrl;
-	unsigned int mmu_clkstctrl;
-	unsigned int mmucfg_clkstctrl;
-	unsigned int ocmc0clkstctrl;
-	unsigned int vcpclkstctrl;
-	unsigned int mpuclkstctrl;
-	unsigned int sysclk4clkstctrl;
-	unsigned int sysclk5clkstctrl;
-	unsigned int sysclk6clkstctrl;
-	unsigned int rtcclkstctrl;
-	unsigned int l3fastclkstctrl;
-	unsigned int resv0[67];
-	unsigned int mcasp0clkctrl;
-	unsigned int mcasp1clkctrl;
-	unsigned int mcasp2clkctrl;
-	unsigned int mcbspclkctrl;
-	unsigned int uart0clkctrl;
-	unsigned int uart1clkctrl;
-	unsigned int uart2clkctrl;
-	unsigned int gpio0clkctrl;
-	unsigned int gpio1clkctrl;
-	unsigned int i2c0clkctrl;
-	unsigned int i2c1clkctrl;
-	unsigned int mcasp345clkctrl;
-	unsigned int atlclkctrl;
-	unsigned int mlbclkctrl;
-	unsigned int pataclkctrl;
-	unsigned int resv1[1];
-	unsigned int uart3clkctrl;
-	unsigned int uart4clkctrl;
-	unsigned int uart5clkctrl;
-	unsigned int wdtimerclkctrl;
-	unsigned int spiclkctrl;
-	unsigned int mailboxclkctrl;
-	unsigned int spinboxclkctrl;
-	unsigned int mmudataclkctrl;
-	unsigned int resv2[2];
-	unsigned int mmucfgclkctrl;
-	unsigned int resv3[2];
-	unsigned int ocmc0clkctrl;
-	unsigned int vcpclkctrl;
-	unsigned int resv4[2];
-	unsigned int controlclkctrl;
-	unsigned int resv5[2];
-	unsigned int gpmcclkctrl;
-	unsigned int ethernet0clkctrl;
-	unsigned int ethernet1clkctrl;
-	unsigned int mpuclkctrl;
-	unsigned int debugssclkctrl;
-	unsigned int l3clkctrl;
-	unsigned int l4hsclkctrl;
-	unsigned int l4lsclkctrl;
-	unsigned int rtcclkctrl;
-	unsigned int tpccclkctrl;
-	unsigned int tptc0clkctrl;
-	unsigned int tptc1clkctrl;
-	unsigned int tptc2clkctrl;
-	unsigned int tptc3clkctrl;
-	unsigned int resv7[4];
-	unsigned int dcan01clkctrl;
-	unsigned int mmchs0clkctrl;
-	unsigned int mmchs1clkctrl;
-	unsigned int mmchs2clkctrl;
-	unsigned int custefuseclkctrl;
-};
-
 #define SATA_PLL_BASE			(CTRL_BASE + 0x0720)
 
 struct sata_pll {
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c
new file mode 100644
index 0000000..ace4a5a
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c
@@ -0,0 +1,445 @@
+/*
+ * clock_ti816x.c
+ *
+ * Clocks for TI816X based boards
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * Based on TI-PSP-04.00.02.14 :
+ *
+ * Copyright (C) 2009, Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+#include <asm/emif.h>
+
+#define CM_PLL_BASE		(CTRL_BASE + 0x0400)
+
+/* Main PLL */
+#define MAIN_N			64
+#define MAIN_P			0x1
+#define MAIN_INTFREQ1		0x8
+#define MAIN_FRACFREQ1		0x800000
+#define MAIN_MDIV1		0x2
+#define MAIN_INTFREQ2		0xE
+#define MAIN_FRACFREQ2		0x0
+#define MAIN_MDIV2		0x1
+#define MAIN_INTFREQ3		0x8
+#define MAIN_FRACFREQ3		0xAAAAB0
+#define MAIN_MDIV3		0x3
+#define MAIN_INTFREQ4		0x9
+#define MAIN_FRACFREQ4		0x55554F
+#define MAIN_MDIV4		0x3
+#define MAIN_INTFREQ5		0x9
+#define MAIN_FRACFREQ5		0x374BC6
+#define MAIN_MDIV5		0xC
+#define MAIN_MDIV6		0x48
+#define MAIN_MDIV7		0x4
+
+/* DDR PLL */
+#if defined(CONFIG_TI816X_DDR_PLL_400) /* 400 MHz */
+#define DDR_N			59
+#define DDR_P			0x1
+#define DDR_MDIV1		0x4
+#define DDR_INTFREQ2		0x8
+#define DDR_FRACFREQ2		0xD99999
+#define DDR_MDIV2		0x1E
+#define DDR_INTFREQ3		0x8
+#define DDR_FRACFREQ3		0x0
+#define DDR_MDIV3		0x4
+#define DDR_INTFREQ4		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4		0x0
+#define DDR_MDIV4		0x4
+#define DDR_INTFREQ5		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5		0x0
+#define DDR_MDIV5		0x4
+#elif defined(CONFIG_TI816X_DDR_PLL_531) /* 531 MHz */
+#define DDR_N			59
+#define DDR_P			0x1
+#define DDR_MDIV1		0x3
+#define DDR_INTFREQ2		0x8
+#define DDR_FRACFREQ2		0xD99999
+#define DDR_MDIV2		0x1E
+#define DDR_INTFREQ3		0x8
+#define DDR_FRACFREQ3		0x0
+#define DDR_MDIV3		0x4
+#define DDR_INTFREQ4		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4		0x0
+#define DDR_MDIV4		0x4
+#define DDR_INTFREQ5		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5		0x0
+#define DDR_MDIV5		0x4
+#elif defined(CONFIG_TI816X_DDR_PLL_675) /* 675 MHz */
+#define DDR_N			50
+#define DDR_P			0x1
+#define DDR_MDIV1		0x2
+#define DDR_INTFREQ2		0x9
+#define DDR_FRACFREQ2		0x0
+#define DDR_MDIV2		0x19
+#define DDR_INTFREQ3		0x13
+#define DDR_FRACFREQ3		0x800000
+#define DDR_MDIV3		0x2
+#define DDR_INTFREQ4		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4		0x0
+#define DDR_MDIV4		0x4
+#define DDR_INTFREQ5		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5		0x0
+#define DDR_MDIV5		0x4
+#elif defined(CONFIG_TI816X_DDR_PLL_796) /* 796 MHz */
+#define DDR_N			59
+#define DDR_P			0x1
+#define DDR_MDIV1		0x2
+#define DDR_INTFREQ2		0x8
+#define DDR_FRACFREQ2		0xD99999
+#define DDR_MDIV2		0x1E
+#define DDR_INTFREQ3		0x8
+#define DDR_FRACFREQ3		0x0
+#define DDR_MDIV3		0x4
+#define DDR_INTFREQ4		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4		0x0
+#define DDR_MDIV4		0x4
+#define DDR_INTFREQ5		0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5		0x0
+#define DDR_MDIV5		0x4
+#endif
+
+#define CONTROL_STATUS			(CTRL_BASE + 0x40)
+#define DDR_RCD				(CTRL_BASE + 0x070C)
+#define CM_TIMER1_CLKSEL		(PRCM_BASE + 0x390)
+#define DMM_PAT_BASE_ADDR		(DMM_BASE + 0x420)
+#define CM_ALWON_CUST_EFUSE_CLKCTRL	(PRCM_BASE + 0x1628)
+
+#define INTCPS_SYSCONFIG	0x48200010
+#define CM_SYSCLK10_CLKSEL	0x48180324
+
+struct cm_pll {
+	unsigned int mainpll_ctrl;	/* offset 0x400 */
+	unsigned int mainpll_pwd;
+	unsigned int mainpll_freq1;
+	unsigned int mainpll_div1;
+	unsigned int mainpll_freq2;
+	unsigned int mainpll_div2;
+	unsigned int mainpll_freq3;
+	unsigned int mainpll_div3;
+	unsigned int mainpll_freq4;
+	unsigned int mainpll_div4;
+	unsigned int mainpll_freq5;
+	unsigned int mainpll_div5;
+	unsigned int resv0[1];
+	unsigned int mainpll_div6;
+	unsigned int resv1[1];
+	unsigned int mainpll_div7;
+	unsigned int ddrpll_ctrl;	/* offset 0x440 */
+	unsigned int ddrpll_pwd;
+	unsigned int resv2[1];
+	unsigned int ddrpll_div1;
+	unsigned int ddrpll_freq2;
+	unsigned int ddrpll_div2;
+	unsigned int ddrpll_freq3;
+	unsigned int ddrpll_div3;
+	unsigned int ddrpll_freq4;
+	unsigned int ddrpll_div4;
+	unsigned int ddrpll_freq5;
+	unsigned int ddrpll_div5;
+	unsigned int videopll_ctrl;	/* offset 0x470 */
+	unsigned int videopll_pwd;
+	unsigned int videopll_freq1;
+	unsigned int videopll_div1;
+	unsigned int videopll_freq2;
+	unsigned int videopll_div2;
+	unsigned int videopll_freq3;
+	unsigned int videopll_div3;
+	unsigned int resv3[4];
+	unsigned int audiopll_ctrl;	/* offset 0x4A0 */
+	unsigned int audiopll_pwd;
+	unsigned int resv4[2];
+	unsigned int audiopll_freq2;
+	unsigned int audiopll_div2;
+	unsigned int audiopll_freq3;
+	unsigned int audiopll_div3;
+	unsigned int audiopll_freq4;
+	unsigned int audiopll_div4;
+	unsigned int audiopll_freq5;
+	unsigned int audiopll_div5;
+};
+
+const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
+const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE;
+const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+void enable_dmm_clocks(void)
+{
+	writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
+	writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
+	writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
+
+	/* Wait for clocks to be active */
+	while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
+		;
+	/* Wait for emif0 to be fully functional, including OCP */
+	while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0)
+		;
+	/* Wait for emif1 to be fully functional, including OCP */
+	while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0)
+		;
+
+	writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
+	/* Wait for dmm to be fully functional, including OCP */
+	while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0)
+		;
+
+	/* Enable Tiled Access */
+	writel(0x80000000, DMM_PAT_BASE_ADDR);
+}
+
+/* assume delay is aprox at least 1us */
+static void ddr_delay(int d)
+{
+	int i;
+
+	/*
+	 * read a control register.
+	 * this is a bit more delay and cannot be optimized by the compiler
+	 * assuming one read takes 200 cycles and A8 is runing 1 GHz
+	 * somewhat conservative setting
+	 */
+	for (i = 0; i < 50*d; i++)
+		readl(CONTROL_STATUS);
+}
+
+static void main_pll_init_ti816x(void)
+{
+	u32 main_pll_ctrl = 0;
+
+	/* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFFFFFFFB;
+	main_pll_ctrl |= BIT(2);
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+	/* Enable PLL by setting BIT3 in its ctrl reg */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFFFFFFF7;
+	main_pll_ctrl |= BIT(3);
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+	/* Write the values of N,P in the CTRL reg  */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFF;
+	main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8);
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+	/* Power up clock1-7 */
+	writel(0x0, &cmpll->mainpll_pwd);
+
+	/* Program the freq and divider values for clock1-7 */
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1),
+		&cmpll->mainpll_freq1);
+	writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2),
+		&cmpll->mainpll_freq2);
+	writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3),
+		&cmpll->mainpll_freq3);
+	writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4),
+		&cmpll->mainpll_freq4);
+	writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4);
+
+	writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5),
+		&cmpll->mainpll_freq5);
+	writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5);
+
+	writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6);
+
+	writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7);
+
+	/* Wait for PLL to lock */
+	while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7))
+		;
+
+	/* Put the PLL in normal mode, disable bypass */
+	main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+	main_pll_ctrl &= 0xFFFFFFFB;
+	writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+}
+
+static void ddr_pll_bypass_ti816x(void)
+{
+	u32 ddr_pll_ctrl = 0;
+
+	/* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */
+	ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+	ddr_pll_ctrl &= 0xFFFFFFFB;
+	ddr_pll_ctrl |= BIT(2);
+	writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+}
+
+static void ddr_pll_init_ti816x(void)
+{
+	u32 ddr_pll_ctrl = 0;
+	/* Enable PLL by setting BIT3 in its ctrl reg */
+	ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+	ddr_pll_ctrl &= 0xFFFFFFF7;
+	ddr_pll_ctrl |= BIT(3);
+	writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+	/* Write the values of N,P in the CTRL reg  */
+	ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+	ddr_pll_ctrl &= 0xFF;
+	ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8);
+	writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+	ddr_delay(10);
+
+	/* Power up clock1-5 */
+	writel(0x0, &cmpll->ddrpll_pwd);
+
+	/* Program the freq and divider values for clock1-3 */
+	writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1);
+	ddr_delay(1);
+	writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1);
+	writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2),
+		&cmpll->ddrpll_freq2);
+	writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2);
+	writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3);
+	ddr_delay(1);
+	writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3);
+	ddr_delay(1);
+	writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+		&cmpll->ddrpll_freq3);
+	ddr_delay(1);
+	writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+		&cmpll->ddrpll_freq3);
+
+	ddr_delay(5);
+
+	/* Wait for PLL to lock */
+	while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7))
+		;
+
+	/* Power up RCD */
+	writel(BIT(0), DDR_RCD);
+}
+
+static void peripheral_enable(void)
+{
+	/* Wake-up the l3_slow clock */
+	writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
+
+	/*
+	 * Note on Timers:
+	 * There are 8 timers(0-7) out of which timer 0 is a secure timer.
+	 * Timer 0 mux should not be changed
+	 *
+	 * To access the timer registers we need the to be
+	 * enabled which is what we do in the first step
+	 */
+
+	/* Enable timer1 */
+	writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl);
+	/* Select timer1 clock to be CLKIN (27MHz) */
+	writel(BIT(1), CM_TIMER1_CLKSEL);
+
+	/* Wait for timer1 to be ON-ACTIVE */
+	while (((readl(&cmalwon->l3slowclkstctrl)
+					& (0x80000<<1))>>20) != 1)
+		;
+	/* Wait for timer1 to be enabled */
+	while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0)
+		;
+	/* Active posted mode */
+	writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54));
+	while (readl(DM_TIMER1_BASE + 0x10) & BIT(0))
+		;
+	/* Start timer1  */
+	writel(BIT(0), (DM_TIMER1_BASE + 0x38));
+
+	/* eFuse */
+	writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL);
+	while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN)
+		;
+
+	/* Enable gpio0 */
+	writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl);
+	while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN)
+		;
+	writel((BIT(8)), &cmalwon->gpio0clkctrl);
+
+	/* Enable spi */
+	writel(PRCM_MOD_EN, &cmalwon->spiclkctrl);
+	while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN)
+		;
+
+	/* Enable i2c0 */
+	writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl);
+	while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN)
+		;
+
+	/* Enable ethernet0 */
+	writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
+	writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
+	writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
+
+	/* Enable hsmmc */
+	writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl);
+	while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN)
+		;
+}
+
+void setup_clocks_for_console(void)
+{
+	/* Fix ROM code bug - from TI-PSP-04.00.02.14 */
+	writel(0x0, CM_SYSCLK10_CLKSEL);
+
+	ddr_pll_bypass_ti816x();
+
+	/* Enable uart0-2 */
+	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl);
+	while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl);
+	while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN)
+		;
+	while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
+		;
+}
+
+void prcm_init(void)
+{
+	/* Enable the control */
+	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
+
+	main_pll_init_ti816x();
+	ddr_pll_init_ti816x();
+
+	/*
+	 * With clk freqs setup to desired values,
+	 * enable the required peripherals
+	 */
+	peripheral_enable();
+}
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 3abb609..7340c4b 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -94,7 +94,9 @@ void config_ddr(unsigned int pll, unsigned int ioctrl,
 		const struct emif_regs *regs, int nr)
 {
 	ddr_pll_config(pll);
+#ifndef CONFIG_TI816X
 	config_vtp(nr);
+#endif
 	config_cmd_ctrl(ctrl, nr);
 
 	config_ddr_data(data, nr);
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index ff9d616..f212add 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -21,6 +21,10 @@
 
 #include <asm/arch/clocks_am33xx.h>
 
+#ifdef CONFIG_TI81XX
+#include <asm/arch/clock_ti81xx.h>
+#endif
+
 #define LDELAY 1000000
 
 /*CM_<clock_domain>__CLKCTRL */
diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
new file mode 100644
index 0000000..f069922
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
@@ -0,0 +1,142 @@
+/*
+ * ti81xx.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _CLOCK_TI81XX_H_
+#define _CLOCK_TI81XX_H_
+
+#define PRCM_MOD_EN     0x2
+
+#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500)
+#define CM_ALWON_BASE   (PRCM_BASE + 0x1400)
+
+struct cm_def {
+	unsigned int resv0[2];
+	unsigned int l3fastclkstctrl;
+	unsigned int resv1[1];
+	unsigned int pciclkstctrl;
+	unsigned int resv2[1];
+	unsigned int ducaticlkstctrl;
+	unsigned int resv3[1];
+	unsigned int emif0clkctrl;
+	unsigned int emif1clkctrl;
+	unsigned int dmmclkctrl;
+	unsigned int fwclkctrl;
+	unsigned int resv4[10];
+	unsigned int usbclkctrl;
+	unsigned int resv5[1];
+	unsigned int sataclkctrl;
+	unsigned int resv6[4];
+	unsigned int ducaticlkctrl;
+	unsigned int pciclkctrl;
+};
+
+struct cm_alwon {
+	unsigned int l3slowclkstctrl;
+	unsigned int ethclkstctrl;
+	unsigned int l3medclkstctrl;
+	unsigned int mmu_clkstctrl;
+	unsigned int mmucfg_clkstctrl;
+	unsigned int ocmc0clkstctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int vcpclkstctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int ocmc1clkstctrl;
+#endif
+	unsigned int mpuclkstctrl;
+	unsigned int sysclk4clkstctrl;
+	unsigned int sysclk5clkstctrl;
+	unsigned int sysclk6clkstctrl;
+	unsigned int rtcclkstctrl;
+	unsigned int l3fastclkstctrl;
+	unsigned int resv0[67];
+	unsigned int mcasp0clkctrl;
+	unsigned int mcasp1clkctrl;
+	unsigned int mcasp2clkctrl;
+	unsigned int mcbspclkctrl;
+	unsigned int uart0clkctrl;
+	unsigned int uart1clkctrl;
+	unsigned int uart2clkctrl;
+	unsigned int gpio0clkctrl;
+	unsigned int gpio1clkctrl;
+	unsigned int i2c0clkctrl;
+	unsigned int i2c1clkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int mcasp345clkctrl;
+	unsigned int atlclkctrl;
+	unsigned int mlbclkctrl;
+	unsigned int pataclkctrl;
+	unsigned int resv1[1];
+	unsigned int uart3clkctrl;
+	unsigned int uart4clkctrl;
+	unsigned int uart5clkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int resv1[1];
+	unsigned int timer1clkctrl;
+	unsigned int timer2clkctrl;
+	unsigned int timer3clkctrl;
+	unsigned int timer4clkctrl;
+	unsigned int timer5clkctrl;
+	unsigned int timer6clkctrl;
+	unsigned int timer7clkctrl;
+#endif
+	unsigned int wdtimerclkctrl;
+	unsigned int spiclkctrl;
+	unsigned int mailboxclkctrl;
+	unsigned int spinboxclkctrl;
+	unsigned int mmudataclkctrl;
+	unsigned int resv2[2];
+	unsigned int mmucfgclkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int resv3[2];
+#elif defined(CONFIG_TI816X)
+	unsigned int resv3[1];
+	unsigned int sdioclkctrl;
+#endif
+	unsigned int ocmc0clkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int vcpclkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int ocmc1clkctrl;
+#endif
+	unsigned int resv4[2];
+	unsigned int controlclkctrl;
+	unsigned int resv5[2];
+	unsigned int gpmcclkctrl;
+	unsigned int ethernet0clkctrl;
+	unsigned int ethernet1clkctrl;
+	unsigned int mpuclkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int debugssclkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int resv6[1];
+#endif
+	unsigned int l3clkctrl;
+	unsigned int l4hsclkctrl;
+	unsigned int l4lsclkctrl;
+	unsigned int rtcclkctrl;
+	unsigned int tpccclkctrl;
+	unsigned int tptc0clkctrl;
+	unsigned int tptc1clkctrl;
+	unsigned int tptc2clkctrl;
+	unsigned int tptc3clkctrl;
+#if defined(CONFIG_TI814X)
+	unsigned int resv6[4];
+	unsigned int dcan01clkctrl;
+	unsigned int mmchs0clkctrl;
+	unsigned int mmchs1clkctrl;
+	unsigned int mmchs2clkctrl;
+	unsigned int custefuseclkctrl;
+#elif defined(CONFIG_TI816X)
+	unsigned int sr0clkctrl;
+	unsigned int sr1clkctrl;
+#endif
+};
+
+#endif /* _CLOCK_TI81XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index bb53a6a..374edbf 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -200,37 +200,46 @@ struct ddr_data_regs {
  * correspond to DATA1 registers defined here.
  */
 struct ddr_regs {
-	unsigned int resv0[7];
-	unsigned int cm0csratio;	/* offset 0x01C */
+	unsigned int resv0[3];
+	unsigned int cm0config;		/* offset 0x00C */
+	unsigned int cm0configclk;	/* offset 0x010 */
 	unsigned int resv1[2];
+	unsigned int cm0csratio;	/* offset 0x01C */
+	unsigned int resv2[2];
 	unsigned int cm0dldiff;		/* offset 0x028 */
 	unsigned int cm0iclkout;	/* offset 0x02C */
-	unsigned int resv2[8];
+	unsigned int resv3[4];
+	unsigned int cm1config;		/* offset 0x040 */
+	unsigned int cm1configclk;	/* offset 0x044 */
+	unsigned int resv4[2];
 	unsigned int cm1csratio;	/* offset 0x050 */
-	unsigned int resv3[2];
+	unsigned int resv5[2];
 	unsigned int cm1dldiff;		/* offset 0x05C */
 	unsigned int cm1iclkout;	/* offset 0x060 */
-	unsigned int resv4[8];
+	unsigned int resv6[4];
+	unsigned int cm2config;		/* offset 0x074 */
+	unsigned int cm2configclk;	/* offset 0x078 */
+	unsigned int resv7[2];
 	unsigned int cm2csratio;	/* offset 0x084 */
-	unsigned int resv5[2];
+	unsigned int resv8[2];
 	unsigned int cm2dldiff;		/* offset 0x090 */
 	unsigned int cm2iclkout;	/* offset 0x094 */
-	unsigned int resv6[12];
+	unsigned int resv9[12];
 	unsigned int dt0rdsratio0;	/* offset 0x0C8 */
-	unsigned int resv7[4];
+	unsigned int resv10[4];
 	unsigned int dt0wdsratio0;	/* offset 0x0DC */
-	unsigned int resv8[4];
+	unsigned int resv11[4];
 	unsigned int dt0wiratio0;	/* offset 0x0F0 */
-	unsigned int resv9;
+	unsigned int resv12;
 	unsigned int dt0wimode0;	/* offset 0x0F8 */
 	unsigned int dt0giratio0;	/* offset 0x0FC */
-	unsigned int resv10;
+	unsigned int resv13;
 	unsigned int dt0gimode0;	/* offset 0x104 */
 	unsigned int dt0fwsratio0;	/* offset 0x108 */
-	unsigned int resv11[4];
+	unsigned int resv14[4];
 	unsigned int dt0dqoffset;	/* offset 0x11C */
 	unsigned int dt0wrsratio0;	/* offset 0x120 */
-	unsigned int resv12[4];
+	unsigned int resv15[4];
 	unsigned int dt0rdelays0;	/* offset 0x134 */
 	unsigned int dt0dldiff0;	/* offset 0x138 */
 };
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 5a27f9c..5106d7b 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -23,6 +23,8 @@
 #include <asm/arch/omap.h>
 #ifdef CONFIG_AM33XX
 #include <asm/arch/hardware_am33xx.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/hardware_ti816x.h>
 #elif defined(CONFIG_TI814X)
 #include <asm/arch/hardware_ti814x.h>
 #endif
@@ -61,21 +63,13 @@
 #define CM_CEFUSE			0x44E00A00
 #define PRM_DEVICE			0x44E00F00
 
-/* VTP Base address */
-#define VTP1_CTRL_ADDR			0x48140E10
-
 /* DDR Base address */
 #define DDR_CTRL_ADDR			0x44E10E04
 #define DDR_CONTROL_BASE_ADDR		0x44E11404
-#define DDR_PHY_CMD_ADDR2		0x47C0C800
-#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
 
 /* UART */
 #define DEFAULT_UART_BASE		UART0_BASE
 
-#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
-#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
-
 /* GPMC Base address */
 #define GPMC_BASE			0x50000000
 
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
index fa02f19..8df60ac 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h
@@ -39,12 +39,18 @@
 
 /* VTP Base address */
 #define VTP0_CTRL_ADDR			0x44E10E0C
+#define VTP1_CTRL_ADDR			0x48140E10
 
 /* DDR Base address */
 #define DDR_PHY_CMD_ADDR		0x44E12000
 #define DDR_PHY_DATA_ADDR		0x44E120C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
 #define DDR_DATA_REGS_NR		2
 
+#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
+
 /* CPSW Config space */
 #define CPSW_MDIO_BASE			0x4A101000
 
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
index 8f9315c..2ac6b7d 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
@@ -39,12 +39,18 @@
 
 /* VTP Base address */
 #define VTP0_CTRL_ADDR			0x48140E0C
+#define VTP1_CTRL_ADDR			0x48140E10
 
 /* DDR Base address */
 #define DDR_PHY_CMD_ADDR		0x47C0C400
 #define DDR_PHY_DATA_ADDR		0x47C0C4C8
+#define DDR_PHY_CMD_ADDR2		0x47C0C800
+#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
 #define DDR_DATA_REGS_NR		4
 
+#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
+
 /* CPSW Config space */
 #define CPSW_MDIO_BASE			0x4A100800
 
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
new file mode 100644
index 0000000..141b703
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h
@@ -0,0 +1,57 @@
+/*
+ * hardware_ti816x.h
+ *
+ * TI816x hardware specific header
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ * Based on TI-PSP-04.00.02.14
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AM33XX_HARDWARE_TI816X_H
+#define __AM33XX_HARDWARE_TI816X_H
+
+/* Watchdog Timer */
+#define WDT_BASE		0x480C2000
+
+/* Control Module Base Address */
+#define CTRL_BASE		0x48140000
+
+/* PRCM Base Address */
+#define PRCM_BASE		0x48180000
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR		0x48198358
+#define VTP1_CTRL_ADDR		0x4819A358
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR	0x48198000
+#define DDR_PHY_DATA_ADDR	0x481980C8
+#define DDR_PHY_CMD_ADDR2	0x4819A000
+#define DDR_PHY_DATA_ADDR2	0x4819A0C8
+#define DDR_DATA_REGS_NR	4
+
+/* UART */
+#define UART0_BASE		0x48020000
+#define UART1_BASE		0x48022000
+#define UART2_BASE		0x48024000
+
+#define DDRPHY_0_CONFIG_BASE	0x48198000
+#define DDRPHY_1_CONFIG_BASE	0x4819A000
+#define DDRPHY_CONFIG_BASE	((emif == 0) ? \
+	DDRPHY_0_CONFIG_BASE : DDRPHY_1_CONFIG_BASE)
+
+/* RTC base address */
+#define RTC_BASE		0x480C0000
+
+#endif /* __AM33XX_HARDWARE_TI816X_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
index 51ba791..724e252 100644
--- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
@@ -27,6 +27,9 @@
 #if defined(CONFIG_TI814X)
 #undef MMC_CLOCK_REFERENCE
 #define MMC_CLOCK_REFERENCE	192 /* MHz */
+#elif defined(CONFIG_TI816X)
+#undef MMC_CLOCK_REFERENCE
+#define MMC_CLOCK_REFERENCE	48 /* MHz */
 #endif
 
 #endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h
index 1c6b65f..4caa4d8 100644
--- a/arch/arm/include/asm/arch-am33xx/mux.h
+++ b/arch/arm/include/asm/arch-am33xx/mux.h
@@ -23,6 +23,8 @@
 #include <asm/arch/mux_am33xx.h>
 #elif defined(CONFIG_TI814X)
 #include <asm/arch/mux_ti814x.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/mux_ti816x.h>
 #endif
 
 struct module_pin_mux {
diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti816x.h b/arch/arm/include/asm/arch-am33xx/mux_ti816x.h
new file mode 100644
index 0000000..e4e5a48
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/mux_ti816x.h
@@ -0,0 +1,363 @@
+/*
+ * mux_ti816x.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_TI816X_H_
+#define _MUX_TI816X_H_
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset)  \
+	__raw_writel(value, (CTRL_BASE + offset));
+
+#define PULLDOWN_EN	(0x0 << 4)	/* Pull Down Selection */
+#define PULLUP_EN	(0x1 << 4)	/* Pull Up Selection */
+#define PULLUDEN	(0x0 << 3)	/* Pull up enabled */
+#define PULLUDDIS	(0x1 << 3)	/* Pull up disabled */
+#define MODE(val)	(val)		/* used for Readability */
+
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int pincntl1;
+	int pincntl2;
+	int pincntl3;
+	int pincntl4;
+	int pincntl5;
+	int pincntl6;
+	int pincntl7;
+	int pincntl8;
+	int pincntl9;
+	int pincntl10;
+	int pincntl11;
+	int pincntl12;
+	int pincntl13;
+	int pincntl14;
+	int pincntl15;
+	int pincntl16;
+	int pincntl17;
+	int pincntl18;
+	int pincntl19;
+	int pincntl20;
+	int pincntl21;
+	int pincntl22;
+	int pincntl23;
+	int pincntl24;
+	int pincntl25;
+	int pincntl26;
+	int pincntl27;
+	int pincntl28;
+	int pincntl29;
+	int pincntl30;
+	int pincntl31;
+	int pincntl32;
+	int pincntl33;
+	int pincntl34;
+	int pincntl35;
+	int pincntl36;
+	int pincntl37;
+	int pincntl38;
+	int pincntl39;
+	int pincntl40;
+	int pincntl41;
+	int pincntl42;
+	int pincntl43;
+	int pincntl44;
+	int pincntl45;
+	int pincntl46;
+	int pincntl47;
+	int pincntl48;
+	int pincntl49;
+	int pincntl50;
+	int pincntl51;
+	int pincntl52;
+	int pincntl53;
+	int pincntl54;
+	int pincntl55;
+	int pincntl56;
+	int pincntl57;
+	int pincntl58;
+	int pincntl59;
+	int pincntl60;
+	int pincntl61;
+	int pincntl62;
+	int pincntl63;
+	int pincntl64;
+	int pincntl65;
+	int pincntl66;
+	int pincntl67;
+	int pincntl68;
+	int pincntl69;
+	int pincntl70;
+	int pincntl71;
+	int pincntl72;
+	int pincntl73;
+	int pincntl74;
+	int pincntl75;
+	int pincntl76;
+	int pincntl77;
+	int pincntl78;
+	int pincntl79;
+	int pincntl80;
+	int pincntl81;
+	int pincntl82;
+	int pincntl83;
+	int pincntl84;
+	int pincntl85;
+	int pincntl86;
+	int pincntl87;
+	int pincntl88;
+	int pincntl89;
+	int pincntl90;
+	int pincntl91;
+	int pincntl92;
+	int pincntl93;
+	int pincntl94;
+	int pincntl95;
+	int pincntl96;
+	int pincntl97;
+	int pincntl98;
+	int pincntl99;
+	int pincntl100;
+	int pincntl101;
+	int pincntl102;
+	int pincntl103;
+	int pincntl104;
+	int pincntl105;
+	int pincntl106;
+	int pincntl107;
+	int pincntl108;
+	int pincntl109;
+	int pincntl110;
+	int pincntl111;
+	int pincntl112;
+	int pincntl113;
+	int pincntl114;
+	int pincntl115;
+	int pincntl116;
+	int pincntl117;
+	int pincntl118;
+	int pincntl119;
+	int pincntl120;
+	int pincntl121;
+	int pincntl122;
+	int pincntl123;
+	int pincntl124;
+	int pincntl125;
+	int pincntl126;
+	int pincntl127;
+	int pincntl128;
+	int pincntl129;
+	int pincntl130;
+	int pincntl131;
+	int pincntl132;
+	int pincntl133;
+	int pincntl134;
+	int pincntl135;
+	int pincntl136;
+	int pincntl137;
+	int pincntl138;
+	int pincntl139;
+	int pincntl140;
+	int pincntl141;
+	int pincntl142;
+	int pincntl143;
+	int pincntl144;
+	int pincntl145;
+	int pincntl146;
+	int pincntl147;
+	int pincntl148;
+	int pincntl149;
+	int pincntl150;
+	int pincntl151;
+	int pincntl152;
+	int pincntl153;
+	int pincntl154;
+	int pincntl155;
+	int pincntl156;
+	int pincntl157;
+	int pincntl158;
+	int pincntl159;
+	int pincntl160;
+	int pincntl161;
+	int pincntl162;
+	int pincntl163;
+	int pincntl164;
+	int pincntl165;
+	int pincntl166;
+	int pincntl167;
+	int pincntl168;
+	int pincntl169;
+	int pincntl170;
+	int pincntl171;
+	int pincntl172;
+	int pincntl173;
+	int pincntl174;
+	int pincntl175;
+	int pincntl176;
+	int pincntl177;
+	int pincntl178;
+	int pincntl179;
+	int pincntl180;
+	int pincntl181;
+	int pincntl182;
+	int pincntl183;
+	int pincntl184;
+	int pincntl185;
+	int pincntl186;
+	int pincntl187;
+	int pincntl188;
+	int pincntl189;
+	int pincntl190;
+	int pincntl191;
+	int pincntl192;
+	int pincntl193;
+	int pincntl194;
+	int pincntl195;
+	int pincntl196;
+	int pincntl197;
+	int pincntl198;
+	int pincntl199;
+	int pincntl200;
+	int pincntl201;
+	int pincntl202;
+	int pincntl203;
+	int pincntl204;
+	int pincntl205;
+	int pincntl206;
+	int pincntl207;
+	int pincntl208;
+	int pincntl209;
+	int pincntl210;
+	int pincntl211;
+	int pincntl212;
+	int pincntl213;
+	int pincntl214;
+	int pincntl215;
+	int pincntl216;
+	int pincntl217;
+	int pincntl218;
+	int pincntl219;
+	int pincntl220;
+	int pincntl221;
+	int pincntl222;
+	int pincntl223;
+	int pincntl224;
+	int pincntl225;
+	int pincntl226;
+	int pincntl227;
+	int pincntl228;
+	int pincntl229;
+	int pincntl230;
+	int pincntl231;
+	int pincntl232;
+	int pincntl233;
+	int pincntl234;
+	int pincntl235;
+	int pincntl236;
+	int pincntl237;
+	int pincntl238;
+	int pincntl239;
+	int pincntl240;
+	int pincntl241;
+	int pincntl242;
+	int pincntl243;
+	int pincntl244;
+	int pincntl245;
+	int pincntl246;
+	int pincntl247;
+	int pincntl248;
+	int pincntl249;
+	int pincntl250;
+	int pincntl251;
+	int pincntl252;
+	int pincntl253;
+	int pincntl254;
+	int pincntl255;
+	int pincntl256;
+	int pincntl257;
+	int pincntl258;
+	int pincntl259;
+	int pincntl260;
+	int pincntl261;
+	int pincntl262;
+	int pincntl263;
+	int pincntl264;
+	int pincntl265;
+	int pincntl266;
+	int pincntl267;
+	int pincntl268;
+	int pincntl269;
+	int pincntl270;
+	int pincntl271;
+	int pincntl272;
+	int pincntl273;
+	int pincntl274;
+	int pincntl275;
+	int pincntl276;
+	int pincntl277;
+	int pincntl278;
+	int pincntl279;
+	int pincntl280;
+	int pincntl281;
+	int pincntl282;
+	int pincntl283;
+	int pincntl284;
+	int pincntl285;
+	int pincntl286;
+	int pincntl287;
+	int pincntl288;
+	int pincntl289;
+	int pincntl290;
+	int pincntl291;
+	int pincntl292;
+	int pincntl293;
+	int pincntl294;
+	int pincntl295;
+	int pincntl296;
+	int pincntl297;
+	int pincntl298;
+	int pincntl299;
+	int pincntl300;
+	int pincntl301;
+	int pincntl302;
+	int pincntl303;
+	int pincntl304;
+	int pincntl305;
+	int pincntl306;
+	int pincntl307;
+	int pincntl308;
+	int pincntl309;
+	int pincntl310;
+	int pincntl311;
+	int pincntl312;
+	int pincntl313;
+	int pincntl314;
+	int pincntl315;
+	int pincntl316;
+	int pincntl317;
+	int pincntl318;
+	int pincntl319;
+	int pincntl320;
+	int pincntl321;
+	int pincntl322;
+	int pincntl323;
+};
+
+#endif /* endif _MUX_TI816X_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 4c23b27..6d7e8d6 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -23,6 +23,14 @@
 #ifndef	_ASM_ARCH_SPL_H_
 #define	_ASM_SPL_H_
 
+#if defined(CONFIG_TI816X)
+#define BOOT_DEVICE_XIP		2
+#define BOOT_DEVICE_NAND	3
+#define BOOT_DEVICE_MMC1	6
+#define BOOT_DEVICE_MMC2	5
+#define BOOT_DEVICE_UART	0x43
+#define BOOT_DEVICE_MMC2_2	0xFF
+#else
 #define BOOT_DEVICE_XIP       	2
 #define BOOT_DEVICE_NAND	5
 #ifdef CONFIG_AM33XX
@@ -37,11 +45,12 @@
 #define BOOT_DEVICE_USBETH	68
 #define BOOT_DEVICE_CPGMAC	70
 #define BOOT_DEVICE_MMC2_2      0xFF
+#endif
 
 #ifdef CONFIG_AM33XX
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
 #endif
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v5 3/3] Add TI816X evm board support
       [not found] <1372432721-1406-1-git-send-email-atenart@adeneo-embedded.com>
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X TENART Antoine
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 2/3] Add TI816X support TENART Antoine
@ 2013-06-28 15:18 ` TENART Antoine
  2 siblings, 0 replies; 6+ messages in thread
From: TENART Antoine @ 2013-06-28 15:18 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
---
 MAINTAINERS                  |    4 +
 board/ti/ti816x/Makefile     |   47 +++++++++
 board/ti/ti816x/evm.c        |  229 ++++++++++++++++++++++++++++++++++++++++++
 boards.cfg                   |    1 +
 include/configs/ti816x_evm.h |  180 +++++++++++++++++++++++++++++++++
 5 files changed, 461 insertions(+)
 create mode 100644 board/ti/ti816x/Makefile
 create mode 100644 board/ti/ti816x/evm.c
 create mode 100644 include/configs/ti816x_evm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 7820375..38ff5c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -940,6 +940,10 @@ Lucas Stach <dev@lynxeye.de>
 
 	colibri_t20_iris	Tegra20 (ARM7 & A9 Dual Core)
 
+Antoine Tenart <atenart@adeneo-embedded.com>
+
+	TI816X		ARM ARMV7 (TI816x Soc)
+
 Nick Thompson <nick.thompson@gefanuc.com>
 
 	da830evm	ARM926EJS (DA830/OMAP-L137)
diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile
new file mode 100644
index 0000000..dc23d93
--- /dev/null
+++ b/board/ti/ti816x/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+# Antoine Tenart, <atenart@adeneo-embedded.com>
+#
+# Based on TI-PSP-04.00.02.14 :
+#
+# Copyright (C) 2009, Texas Instruments, Incorporated
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation version 2.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= evm.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
new file mode 100644
index 0000000..632ad9f
--- /dev/null
+++ b/board/ti/ti816x/evm.c
@@ -0,0 +1,229 @@
+/*
+ * evm.c
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+
+static struct module_pin_mux mmc_pin_mux[] = {
+	{ OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) },
+	{ OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ -1 },
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+	.dmm_lisa_map_0 = 0x00000000,
+	.dmm_lisa_map_1 = 0x00000000,
+	.dmm_lisa_map_2 = 0x80640300,
+	.dmm_lisa_map_3 = 0xC0640320,
+};
+
+/*
+ * DDR2 related definitions
+ */
+
+static struct ddr_data ddr2_data = {
+	.datardsratio0		= ((0x40<<10) | (0x40<<0)),
+	.datawdsratio0		= ((0x4A<<10) | (0x4A<<0)),
+	.datawiratio0		= ((0x0<<10) | (0x0<<0)),
+	.datagiratio0		= ((0x0<<10) | (0x0<<0)),
+	.datafwsratio0		= ((0x13A<<10) | (0x13A<<0)),
+	.datawrsratio0		= ((0x8A<<10) | (0x8A<<0)),
+	.datauserank0delay	= 0x1,
+	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
+};
+
+static struct cmd_control ddr2_ctrl = {
+	.cmd0csratio	= 0x80,
+	.cmd0dldiff	= 0x04, /* reset value is 0x4 */
+	.cmd0iclkout	= 0x00,
+
+	.cmd1csratio	= 0x80,
+	.cmd1dldiff	= 0x04, /* reset value is 0x4 */
+	.cmd1iclkout	= 0x00,
+
+	.cmd2csratio	= 0x80,
+	.cmd2dldiff	= 0x04, /* reset value is 0x4 */
+	.cmd2iclkout	= 0x00,
+
+};
+
+static struct emif_regs ddr2_emif0_regs = {
+	.sdram_config		= 0x43801A3A,
+	.ref_ctrl		= 0x10000C30,
+	.sdram_tim1		= 0x0AAB15E2,
+	.sdram_tim2		= 0x423631D2,
+	.sdram_tim3		= 0x0080032F,
+	.emif_ddr_phy_ctlr_1	= 0x0, /* depend on cpu rev, set later */
+};
+
+static struct emif_regs ddr2_emif1_regs = {
+	.sdram_config		= 0x43801A3A,
+	.ref_ctrl		= 0x10000C30,
+	.sdram_tim1		= 0x0AAB15E2,
+	.sdram_tim2		= 0x423631D2,
+	.sdram_tim3		= 0x0080032F,
+	.emif_ddr_phy_ctlr_1	= 0x0, /* depend on cpu rev, set later */
+};
+
+/*
+ * DDR3 related definitions
+ */
+
+#if defined(CONFIG_TI816X_DDR_PLL_400)
+#define RD_DQS		0x03B
+#define WR_DQS		0x0A6
+#define RD_DQS_GATE	0x12A
+#define EMIF_SDCFG	0x62A41032
+#define EMIF_SDREF	0x10000C30
+#define EMIF_TIM1	0x0CCCE524
+#define EMIF_TIM2	0x30308023
+#define EMIF_TIM3	0x009F82CF
+#define EMIF_PHYCFG	0x0000010B
+#elif defined(CONFIG_TI816X_DDR_PLL_531)
+#define RD_DQS		0x039
+#define WR_DQS		0x0B4
+#define RD_DQS_GATE	0x13D
+#define EMIF_SDCFG	0x62A51832
+#define EMIF_SDREF	0x1000102E
+#define EMIF_TIM1	0x0EF136AC
+#define EMIF_TIM2	0x30408063
+#define EMIF_TIM3	0x009F83AF
+#define EMIF_PHYCFG	0x0000010C
+#elif defined(CONFIG_TI816X_DDR_PLL_675)
+#define RD_DQS		0x039
+#define WR_DQS		0x091
+#define RD_DQS_GATE	0x196
+#define EMIF_SDCFG	0x62A63032
+#define EMIF_SDREF	0x10001491
+#define EMIF_TIM1	0x13358875
+#define EMIF_TIM2	0x5051806C
+#define EMIF_TIM3	0x009F84AF
+#define EMIF_PHYCFG	0x0000010F
+#elif defined(CONFIG_TI816X_DDR_PLL_796)
+#define RD_DQS		0x035
+#define WR_DQS		0x093
+#define RD_DQS_GATE	0x1B3
+#define EMIF_SDCFG	0x62A73832
+#define EMIF_SDREF	0x10001841
+#define EMIF_TIM1	0x1779C9FE
+#define EMIF_TIM2	0x50608074
+#define EMIF_TIM3	0x009F857F
+#define EMIF_PHYCFG	0x00000110
+#endif
+
+static struct ddr_data ddr3_data = {
+	.datardsratio0		= ((RD_DQS<<10) | (RD_DQS<<0)),
+	.datawdsratio0		= ((WR_DQS<<10) | (WR_DQS<<0)),
+	.datawiratio0		= ((0x20<<10) | 0x20<<0),
+	.datagiratio0		= ((0x20<<10) | 0x20<<0),
+	.datafwsratio0		= ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
+	.datawrsratio0		= (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
+	.datauserank0delay	= 0x1,
+	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
+};
+
+static const struct cmd_control ddr3_ctrl = {
+	.cmd0csratio	= 0x100,
+	.cmd0dldiff	= 0x004, /* reset value is 0x4 */
+	.cmd0iclkout	= 0x001,
+
+	.cmd1csratio	= 0x100,
+	.cmd1dldiff	= 0x004, /* reset value is 0x4 */
+	.cmd1iclkout	= 0x001,
+
+	.cmd2csratio	= 0x100,
+	.cmd2dldiff	= 0x004, /* reset value is 0x4 */
+	.cmd2iclkout	= 0x001,
+};
+
+static const struct emif_regs ddr3_emif0_regs = {
+	.sdram_config		= EMIF_SDCFG,
+	.ref_ctrl		= EMIF_SDREF,
+	.sdram_tim1		= EMIF_TIM1,
+	.sdram_tim2		= EMIF_TIM2,
+	.sdram_tim3		= EMIF_TIM3,
+	.emif_ddr_phy_ctlr_1	= EMIF_PHYCFG,
+};
+
+static const struct emif_regs ddr3_emif1_regs = {
+	.sdram_config		= EMIF_SDCFG,
+	.ref_ctrl		= EMIF_SDREF,
+	.sdram_tim1		= EMIF_TIM1,
+	.sdram_tim2		= EMIF_TIM2,
+	.sdram_tim3		= EMIF_TIM3,
+	.emif_ddr_phy_ctlr_1	= EMIF_PHYCFG,
+};
+
+void set_uart_mux_conf(void) {}
+
+void set_mux_conf_regs(void)
+{
+	configure_module_pin_mux(mmc_pin_mux);
+}
+
+void sdram_init(void)
+{
+	config_dmm(&evm_lisa_map_regs);
+
+#ifdef CONFIG_TI816X_EVM_DDR2
+	ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+	ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+	ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+	ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+
+	if (CONFIG_TI816X_USE_EMIF0) {
+		ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
+			(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
+		config_ddr(0, 0, &ddr2_data, &ddr2_ctrl, &ddr2_emif0_regs, 0);
+	}
+
+	if (CONFIG_TI816X_USE_EMIF1) {
+		ddr2_emif1_regs.emif_ddr_phy_ctlr_1 =
+			(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
+		config_ddr(1, 0, &ddr2_data, &ddr2_ctrl, &ddr2_emif1_regs, 1);
+	}
+#endif
+
+#ifdef CONFIG_TI816X_EVM_DDR3
+	ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+
+	if (CONFIG_TI816X_USE_EMIF0)
+		config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);
+
+	if (CONFIG_TI816X_USE_EMIF1)
+		config_ddr(1, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif1_regs, 1);
+#endif
+}
+#endif /* CONFIG_SPL_BUILD */
diff --git a/boards.cfg b/boards.cfg
index c0c4282..0c8adf0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -250,6 +250,7 @@ am335x_evm_uart4             arm         armv7       am335x              ti
 am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=6
 am335x_evm_usbspl            arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
 ti814x_evm                   arm         armv7       ti814x              ti             am33xx
+ti816x_evm                   arm         armv7       ti816x              ti             am33xx
 pcm051                       arm         armv7       pcm051              phytec         am33xx      pcm051
 sama5d3xek_mmc               arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_MMC
 sama5d3xek_nandflash         arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
new file mode 100644
index 0000000..e9e3b5b
--- /dev/null
+++ b/include/configs/ti816x_evm.h
@@ -0,0 +1,180 @@
+/*
+ * ti816x_evm.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __CONFIG_TI816X_EVM_H
+#define __CONFIG_TI816X_EVM_H
+
+#define CONFIG_TI81XX
+#define CONFIG_TI816X
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_OMAP
+
+#define CONFIG_ARCH_CPU_INIT
+
+#include <asm/arch/omap.h>
+
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (32 * 1024))
+#define CONFIG_SYS_LONGHELP		/* undef save memory */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"u-boot/ti816x# "
+#define CONFIG_MACH_TYPE		MACH_TYPE_TI8168EVM
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG		/* required for ramdisk support */
+
+#include <config_cmd_default.h>		/* u-boot default commands */
+
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_BOOTDELAY		3 /* set negative for no autoboot */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"loadaddr=0x81000000\0"		\
+
+#define CONFIG_BOOTCOMMAND			\
+	"mmc rescan;"				\
+	"fatload mmc 0 ${loadaddr} uImage;"	\
+	"bootm ${loadaddr}"			\
+
+#define CONFIG_BOOTARGS	"console=ttyO2,115200n8 noinitrd earlyprintk"
+
+/* Clock Defines */
+#define V_OSCK          24000000    /* Clock output from T2 */
+#define V_SCLK          (V_OSCK >> 1)
+
+#define CONFIG_SYS_MAXARGS	32
+#define CONFIG_SYS_CBSIZE	512 /* console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
+		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* boot arg buffer size */
+
+#undef  CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
+#define CONFIG_SYS_HZ			1000	   /* 1ms clock */
+
+#define CONFIG_CMD_ASKEN
+#define CONFIG_CMD_ECHO
+#define CONFIG_OMAP_GPIO
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_FS_FAT
+
+/*
+ * Only one of the following two options (DDR3/DDR2) should be enabled
+ * CONFIG_TI816X_EVM_DDR2
+ * CONFIG_TI816X_EVM_DDR3
+ */
+#define CONFIG_TI816X_EVM_DDR3
+
+/*
+ * Supported values: 400, 531, 675 or 796 MHz
+ */
+#define CONFIG_TI816X_DDR_PLL_796
+
+#define CONFIG_TI816X_USE_EMIF0	1
+#define CONFIG_TI816X_USE_EMIF1	1
+
+
+#define CONFIG_NR_DRAM_BANKS	2		/* we have 2 banks of DRAM */
+#define PHYS_DRAM_1		0x80000000	/* DRAM Bank #1 */
+#define PHYS_DRAM_1_SIZE        0x40000000	/* 1 GB */
+#define PHYS_DRAM_2		0xC0000000	/* DRAM Bank #2 */
+#define PHYS_DRAM_2_SIZE	0x40000000	/* 1 GB */
+
+#define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2048MB */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
+		GENERATED_GBL_DATA_SIZE)
+
+/**
+ * Platform/Board specific defs
+ */
+#define CONFIG_SYS_CLK_FREQ     27000000
+#define CONFIG_SYS_TIMERBASE    0x4802E000
+#define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
+
+#undef CONFIG_NAND_OMAP_GPMC
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK      (48000000)
+#define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
+
+#define CONFIG_BAUDRATE     115200
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SERIAL1
+#define CONFIG_SERIAL2
+#define CONFIG_SERIAL3
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE    0x40400000
+#define CONFIG_SPL_MAX_SIZE     ((128 - 18) * 1024)
+#define CONFIG_SPL_STACK        CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR   0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
+#define CONFIG_SPL_LDSCRIPT     "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SYS_TEXT_BASE        0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE  0x100000
+
+/* Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#endif
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X
  2013-06-28 15:18 ` [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X TENART Antoine
@ 2013-06-28 18:34   ` Wolfgang Denk
  2013-07-02  9:03     ` TENART Antoine
       [not found]     ` <3465D313FDFB824F9A9C8CD24FA4F6BC0112AAA5@frontmail.adetel.com>
  0 siblings, 2 replies; 6+ messages in thread
From: Wolfgang Denk @ 2013-06-28 18:34 UTC (permalink / raw)
  To: u-boot

Dear "TENART Antoine",

In message <3465D313FDFB824F9A9C8CD24FA4F6BC0112AA9A@frontmail.adetel.com> you wrote:
> Rename some CONFIG_TI814X to a more generic CONFIG_81XX
> 
> Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com>
> ---
>  Makefile                                |    2 +-
>  arch/arm/cpu/armv7/Makefile             |    2 +-
>  arch/arm/cpu/armv7/omap-common/Makefile |    2 +-
>  arch/arm/include/asm/arch-am33xx/cpu.h  |    2 +-
>  arch/arm/include/asm/arch-am33xx/omap.h |    2 +-
>  drivers/serial/ns16550.c                |    4 ++--
>  spl/Makefile                            |    2 +-
>  7 files changed, 8 insertions(+), 8 deletions(-)

Hmmm... should not any boards that used to set CONFIG_TI814X in their
board config files (ti814x_evm) now also set CONFIG_TI81XX ?

As is, with this patch applied, these boards will probably not build
any more, or at least not work any more.

Please also fix the typo in the commit message:
s/CONFIG_81XX/CONFIG_TI81XX/

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only way you could make a happy  marriage  is  by  cuttin'  their
heads  off  as  soon  as  they say `I do', yes? You can't make happi-
ness...                           - Terry Pratchett, _Witches Abroad_

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X
  2013-06-28 18:34   ` Wolfgang Denk
@ 2013-07-02  9:03     ` TENART Antoine
       [not found]     ` <3465D313FDFB824F9A9C8CD24FA4F6BC0112AAA5@frontmail.adetel.com>
  1 sibling, 0 replies; 6+ messages in thread
From: TENART Antoine @ 2013-07-02  9:03 UTC (permalink / raw)
  To: u-boot

Dear Wolfgang,

> Hmmm... should not any boards that used to set CONFIG_TI814X in their
> board config files (ti814x_evm) now also set CONFIG_TI81XX ?

ti814x_evm already has it.
No other board use CONFIG_TI814X.

> Please also fix the typo in the commit message:
> s/CONFIG_81XX/CONFIG_TI81XX/

Right, I'll fix that.


Regards,

-- 
Antoine

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X
       [not found]     ` <3465D313FDFB824F9A9C8CD24FA4F6BC0112AAA5@frontmail.adetel.com>
@ 2013-07-02 21:36       ` Wolfgang Denk
  0 siblings, 0 replies; 6+ messages in thread
From: Wolfgang Denk @ 2013-07-02 21:36 UTC (permalink / raw)
  To: u-boot

Dear "TENART Antoine",

In message <3465D313FDFB824F9A9C8CD24FA4F6BC0112AAA5@frontmail.adetel.com> you wrote:
> Dear Wolfgang,
> 
> > Hmmm... should not any boards that used to set CONFIG_TI814X in their
> > board config files (ti814x_evm) now also set CONFIG_TI81XX ?
> 
> ti814x_evm already has it.
> No other board use CONFIG_TI814X.

I see, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Time is a drug. Too much of it kills you.
                                      - Terry Pratchett, _Small Gods_

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-07-02 21:36 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1372432721-1406-1-git-send-email-atenart@adeneo-embedded.com>
2013-06-28 15:18 ` [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X TENART Antoine
2013-06-28 18:34   ` Wolfgang Denk
2013-07-02  9:03     ` TENART Antoine
     [not found]     ` <3465D313FDFB824F9A9C8CD24FA4F6BC0112AAA5@frontmail.adetel.com>
2013-07-02 21:36       ` Wolfgang Denk
2013-06-28 15:18 ` [U-Boot] [PATCH v5 2/3] Add TI816X support TENART Antoine
2013-06-28 15:18 ` [U-Boot] [PATCH v5 3/3] Add TI816X evm board support TENART Antoine

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.