[PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Bartlomiej Zolnierkiewicz]

Hi,

This patch series adds new-style AHCI platform drivers for DaVinci DA850
AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
adding these drivers it also fixes ahci_platform_data->suspend() handling
(patch #1) and moves library AHCI platform code to its own file (patch #2).
The new AHCI platform drivers are only compile tested (they are marked as
experimental because of this) and I would ask somebody with the hardware
to verify them (thanks!).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (4):
  ata: ahci_platform: fix ahci_platform_data->suspend method handling
  ata: move library code from ahci_platform.c to libahci_platform.c
  ata: add new-style AHCI platform driver for DaVinci DA850 AHCI
    controller
  ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI
    controller

 drivers/ata/Kconfig            |  23 +-
 drivers/ata/Makefile           |  10 +-
 drivers/ata/ahci_da850.c       | 178 ++++++++++++++
 drivers/ata/ahci_platform.c    | 508 --------------------------------------
 drivers/ata/ahci_spear1340.c   | 222 +++++++++++++++++
 drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 967 insertions(+), 515 deletions(-)
 create mode 100644 drivers/ata/ahci_da850.c
 create mode 100644 drivers/ata/ahci_spear1340.c
 create mode 100644 drivers/ata/libahci_platform.c

-- 
1.8.2.3

[PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Bartlomiej Zolnierkiewicz]

Hi,

This patch series adds new-style AHCI platform drivers for DaVinci DA850
AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
adding these drivers it also fixes ahci_platform_data->suspend() handling
(patch #1) and moves library AHCI platform code to its own file (patch #2).
The new AHCI platform drivers are only compile tested (they are marked as
experimental because of this) and I would ask somebody with the hardware
to verify them (thanks!).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (4):
  ata: ahci_platform: fix ahci_platform_data->suspend method handling
  ata: move library code from ahci_platform.c to libahci_platform.c
  ata: add new-style AHCI platform driver for DaVinci DA850 AHCI
    controller
  ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI
    controller

 drivers/ata/Kconfig            |  23 +-
 drivers/ata/Makefile           |  10 +-
 drivers/ata/ahci_da850.c       | 178 ++++++++++++++
 drivers/ata/ahci_platform.c    | 508 --------------------------------------
 drivers/ata/ahci_spear1340.c   | 222 +++++++++++++++++
 drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 967 insertions(+), 515 deletions(-)
 create mode 100644 drivers/ata/ahci_da850.c
 create mode 100644 drivers/ata/ahci_spear1340.c
 create mode 100644 drivers/ata/libahci_platform.c

-- 
1.8.2.3

[PATCH 1/4] ata: ahci_platform: fix ahci_platform_data->suspend method handling

[Bartlomiej Zolnierkiewicz]

Looking at ST SPEAr1340 AHCI code (the only user of the deprecated
pdata->suspend and pdata->resume) it is obvious the we should return
after calling pdata->suspend() only if the function have returned
non-zero return value.  The code has been broken since commit 1e70c2
("ata/ahci_platform: Add clock framework support").  Fix it.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/ahci_platform.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 70fbf66..7bd6adf 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -521,12 +521,19 @@ int ahci_platform_suspend(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (pdata && pdata->suspend)
-		return pdata->suspend(dev);
+	if (pdata && pdata->suspend) {
+		rc = pdata->suspend(dev);
+		if (rc)
+			goto resume_host;
+	}
 
 	ahci_platform_disable_resources(hpriv);
 
 	return 0;
+
+resume_host:
+	ahci_platform_resume_host(dev);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(ahci_platform_suspend);
 
-- 
1.8.2.3

[PATCH 1/4] ata: ahci_platform: fix ahci_platform_data->suspend method handling

[Bartlomiej Zolnierkiewicz]

Looking at ST SPEAr1340 AHCI code (the only user of the deprecated
pdata->suspend and pdata->resume) it is obvious the we should return
after calling pdata->suspend() only if the function have returned
non-zero return value.  The code has been broken since commit 1e70c2
("ata/ahci_platform: Add clock framework support").  Fix it.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/ahci_platform.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 70fbf66..7bd6adf 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -521,12 +521,19 @@ int ahci_platform_suspend(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (pdata && pdata->suspend)
-		return pdata->suspend(dev);
+	if (pdata && pdata->suspend) {
+		rc = pdata->suspend(dev);
+		if (rc)
+			goto resume_host;
+	}
 
 	ahci_platform_disable_resources(hpriv);
 
 	return 0;
+
+resume_host:
+	ahci_platform_resume_host(dev);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(ahci_platform_suspend);
 
-- 
1.8.2.3

[PATCH 2/4] ata: move library code from ahci_platform.c to libahci_platform.c

[Bartlomiej Zolnierkiewicz]

Move AHCI platform library code from ahci_platform.c to
libahci_platform.c and fix dependencies for ahci_st,
ahci_imx and ahci_sunxi drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig            |   5 +-
 drivers/ata/Makefile           |   8 +-
 drivers/ata/ahci_platform.c    | 515 ---------------------------------------
 drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 547 insertions(+), 522 deletions(-)
 create mode 100644 drivers/ata/libahci_platform.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c4db48c..371e8890 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -99,7 +99,6 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_ST
 	tristate "ST AHCI SATA support"
-	depends on SATA_AHCI_PLATFORM
 	depends on ARCH_STI
 	help
 	  This option enables support for ST AHCI SATA controller.
@@ -108,7 +107,7 @@ config AHCI_ST
 
 config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
-	depends on SATA_AHCI_PLATFORM && MFD_SYSCON
+	depends on MFD_SYSCON
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -117,7 +116,7 @@ config AHCI_IMX
 
 config AHCI_SUNXI
 	tristate "Allwinner sunxi AHCI SATA support"
-	depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
+	depends on ARCH_SUNXI
 	help
 	  This option enables support for the Allwinner sunxi SoC's
 	  onboard AHCI SATA.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index e20148c..6123e64 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -4,15 +4,15 @@ obj-$(CONFIG_ATA)		+= libata.o
 # non-SFF interface
 obj-$(CONFIG_SATA_AHCI)		+= ahci.o libahci.o
 obj-$(CONFIG_SATA_ACARD_AHCI)	+= acard-ahci.o libahci.o
-obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
 obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
-obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o
-obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o
-obj-$(CONFIG_AHCI_ST)		+= ahci_st.o
+obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 7bd6adf..ef67e79 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -12,28 +12,15 @@
  * any later version.
  */
 
-#include <linux/clk.h>
 #include <linux/kernel.h>
-#include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
-#include <linux/phy/phy.h>
-#include <linux/pm_runtime.h>
 #include "ahci.h"
 
-static void ahci_host_stop(struct ata_host *host);
-
-struct ata_port_operations ahci_platform_ops = {
-	.inherits	= &ahci_ops,
-	.host_stop	= ahci_host_stop,
-};
-EXPORT_SYMBOL_GPL(ahci_platform_ops);
-
 static const struct ata_port_info ahci_port_info = {
 	.flags		= AHCI_FLAG_COMMON,
 	.pio_mask	= ATA_PIO4,
@@ -41,345 +28,6 @@ static const struct ata_port_info ahci_port_info = {
 	.port_ops	= &ahci_platform_ops,
 };
 
-static struct scsi_host_template ahci_platform_sht = {
-	AHCI_SHT("ahci_platform"),
-};
-
-/**
- * ahci_platform_enable_clks - Enable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function enables all the clks found in hpriv->clks, starting at
- * index 0. If any clk fails to enable it disables all the clks already
- * enabled in reverse order, and then returns an error.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
-{
-	int c, rc;
-
-	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
-		rc = clk_prepare_enable(hpriv->clks[c]);
-		if (rc)
-			goto disable_unprepare_clk;
-	}
-	return 0;
-
-disable_unprepare_clk:
-	while (--c >= 0)
-		clk_disable_unprepare(hpriv->clks[c]);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
-
-/**
- * ahci_platform_disable_clks - Disable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function disables all the clks found in hpriv->clks, in reverse
- * order of ahci_platform_enable_clks (starting at the end of the array).
- */
-void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
-{
-	int c;
-
-	for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
-		if (hpriv->clks[c])
-			clk_disable_unprepare(hpriv->clks[c]);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
-
-/**
- * ahci_platform_enable_resources - Enable platform resources
- * @hpriv: host private area to store config values
- *
- * This function enables all ahci_platform managed resources in the
- * following order:
- * 1) Regulator
- * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phy
- *
- * If resource enabling fails at any point the previous enabled resources
- * are disabled in reverse order.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
-{
-	int rc;
-
-	if (hpriv->target_pwr) {
-		rc = regulator_enable(hpriv->target_pwr);
-		if (rc)
-			return rc;
-	}
-
-	rc = ahci_platform_enable_clks(hpriv);
-	if (rc)
-		goto disable_regulator;
-
-	if (hpriv->phy) {
-		rc = phy_init(hpriv->phy);
-		if (rc)
-			goto disable_clks;
-
-		rc = phy_power_on(hpriv->phy);
-		if (rc) {
-			phy_exit(hpriv->phy);
-			goto disable_clks;
-		}
-	}
-
-	return 0;
-
-disable_clks:
-	ahci_platform_disable_clks(hpriv);
-
-disable_regulator:
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
-
-/**
- * ahci_platform_disable_resources - Disable platform resources
- * @hpriv: host private area to store config values
- *
- * This function disables all ahci_platform managed resources in the
- * following order:
- * 1) Phy
- * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
- */
-void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
-{
-	if (hpriv->phy) {
-		phy_power_off(hpriv->phy);
-		phy_exit(hpriv->phy);
-	}
-
-	ahci_platform_disable_clks(hpriv);
-
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-
-static void ahci_platform_put_resources(struct device *dev, void *res)
-{
-	struct ahci_host_priv *hpriv = res;
-	int c;
-
-	if (hpriv->got_runtime_pm) {
-		pm_runtime_put_sync(dev);
-		pm_runtime_disable(dev);
-	}
-
-	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
-		clk_put(hpriv->clks[c]);
-}
-
-/**
- * ahci_platform_get_resources - Get platform resources
- * @pdev: platform device to get resources for
- *
- * This function allocates an ahci_host_priv struct, and gets the following
- * resources, storing a reference to them inside the returned struct:
- *
- * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
- * 2) regulator for controlling the targets power (optional)
- * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
- *    or for non devicetree enabled platforms a single clock
- *	4) phy (optional)
- *
- * RETURNS:
- * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
- */
-struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct ahci_host_priv *hpriv;
-	struct clk *clk;
-	int i, rc = -ENOMEM;
-
-	if (!devres_open_group(dev, NULL, GFP_KERNEL))
-		return ERR_PTR(-ENOMEM);
-
-	hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
-			     GFP_KERNEL);
-	if (!hpriv)
-		goto err_out;
-
-	devres_add(dev, hpriv);
-
-	hpriv->mmio = devm_ioremap_resource(dev,
-			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
-	if (IS_ERR(hpriv->mmio)) {
-		dev_err(dev, "no mmio space\n");
-		rc = PTR_ERR(hpriv->mmio);
-		goto err_out;
-	}
-
-	hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
-	if (IS_ERR(hpriv->target_pwr)) {
-		rc = PTR_ERR(hpriv->target_pwr);
-		if (rc == -EPROBE_DEFER)
-			goto err_out;
-		hpriv->target_pwr = NULL;
-	}
-
-	for (i = 0; i < AHCI_MAX_CLKS; i++) {
-		/*
-		 * For now we must use clk_get(dev, NULL) for the first clock,
-		 * because some platforms (da850, spear13xx) are not yet
-		 * converted to use devicetree for clocks.  For new platforms
-		 * this is equivalent to of_clk_get(dev->of_node, 0).
-		 */
-		if (i == 0)
-			clk = clk_get(dev, NULL);
-		else
-			clk = of_clk_get(dev->of_node, i);
-
-		if (IS_ERR(clk)) {
-			rc = PTR_ERR(clk);
-			if (rc == -EPROBE_DEFER)
-				goto err_out;
-			break;
-		}
-		hpriv->clks[i] = clk;
-	}
-
-	hpriv->phy = devm_phy_get(dev, "sata-phy");
-	if (IS_ERR(hpriv->phy)) {
-		rc = PTR_ERR(hpriv->phy);
-		switch (rc) {
-		case -ENODEV:
-		case -ENOSYS:
-			/* continue normally */
-			hpriv->phy = NULL;
-			break;
-
-		case -EPROBE_DEFER:
-			goto err_out;
-
-		default:
-			dev_err(dev, "couldn't get sata-phy\n");
-			goto err_out;
-		}
-	}
-
-	pm_runtime_enable(dev);
-	pm_runtime_get_sync(dev);
-	hpriv->got_runtime_pm = true;
-
-	devres_remove_group(dev, NULL);
-	return hpriv;
-
-err_out:
-	devres_release_group(dev, NULL);
-	return ERR_PTR(rc);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
-
-/**
- * ahci_platform_init_host - Bring up an ahci-platform host
- * @pdev: platform device pointer for the host
- * @hpriv: ahci-host private data for the host
- * @pi_template: template for the ata_port_info to use
- * @force_port_map: param passed to ahci_save_initial_config
- * @mask_port_map: param passed to ahci_save_initial_config
- *
- * This function does all the usual steps needed to bring up an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_init_host(struct platform_device *pdev,
-			    struct ahci_host_priv *hpriv,
-			    const struct ata_port_info *pi_template,
-			    unsigned int force_port_map,
-			    unsigned int mask_port_map)
-{
-	struct device *dev = &pdev->dev;
-	struct ata_port_info pi = *pi_template;
-	const struct ata_port_info *ppi[] = { &pi, NULL };
-	struct ata_host *host;
-	int i, irq, n_ports, rc;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(dev, "no irq\n");
-		return -EINVAL;
-	}
-
-	/* prepare host */
-	hpriv->flags |= (unsigned long)pi.private_data;
-
-	ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
-
-	if (hpriv->cap & HOST_CAP_NCQ)
-		pi.flags |= ATA_FLAG_NCQ;
-
-	if (hpriv->cap & HOST_CAP_PMP)
-		pi.flags |= ATA_FLAG_PMP;
-
-	ahci_set_em_messages(hpriv, &pi);
-
-	/* CAP.NP sometimes indicate the index of the last enabled
-	 * port, at other times, that of the last possible port, so
-	 * determining the maximum port number requires looking at
-	 * both CAP.NP and port_map.
-	 */
-	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
-	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
-	if (!host)
-		return -ENOMEM;
-
-	host->private_data = hpriv;
-
-	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
-		host->flags |= ATA_HOST_PARALLEL_SCAN;
-	else
-		dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
-
-	if (pi.flags & ATA_FLAG_EM)
-		ahci_reset_em(host);
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		ata_port_desc(ap, "mmio %pR",
-			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
-		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
-		/* set enclosure management message type */
-		if (ap->flags & ATA_FLAG_EM)
-			ap->em_message_type = hpriv->em_msg_type;
-
-		/* disabled/not-implemented port */
-		if (!(hpriv->port_map & (1 << i)))
-			ap->ops = &ata_dummy_port_ops;
-	}
-
-	rc = ahci_reset_controller(host);
-	if (rc)
-		return rc;
-
-	ahci_init_controller(host);
-	ahci_print_info(host, "platform");
-
-	return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
-				 &ahci_platform_sht);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_init_host);
-
 static int ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -420,169 +68,6 @@ disable_resources:
 	return rc;
 }
 
-static void ahci_host_stop(struct ata_host *host)
-{
-	struct device *dev = host->dev;
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-
-	if (pdata && pdata->exit)
-		pdata->exit(dev);
-
-	ahci_platform_disable_resources(hpriv);
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * ahci_platform_suspend_host - Suspend an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to suspend an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be disabled after calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend_host(struct device *dev)
-{
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 ctl;
-
-	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
-		dev_err(dev, "firmware update required for suspend/resume\n");
-		return -EIO;
-	}
-
-	/*
-	 * AHCI spec rev1.1 section 8.3.3:
-	 * Software must disable interrupts prior to requesting a
-	 * transition of the HBA to D3 state.
-	 */
-	ctl = readl(mmio + HOST_CTL);
-	ctl &= ~HOST_IRQ_EN;
-	writel(ctl, mmio + HOST_CTL);
-	readl(mmio + HOST_CTL); /* flush */
-
-	return ata_host_suspend(host, PMSG_SUSPEND);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
-
-/**
- * ahci_platform_resume_host - Resume an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to resume an ahci-platform
- * host, note any necessary resources (ie clks, phy, etc.)  must be
- * initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume_host(struct device *dev)
-{
-	struct ata_host *host = dev_get_drvdata(dev);
-	int rc;
-
-	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(host);
-		if (rc)
-			return rc;
-
-		ahci_init_controller(host);
-	}
-
-	ata_host_resume(host);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
-
-/**
- * ahci_platform_suspend - Suspend an ahci-platform device
- * @dev: the platform device to suspend
- *
- * This function suspends the host associated with the device, followed by
- * disabling all the resources of the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend(struct device *dev)
-{
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	int rc;
-
-	rc = ahci_platform_suspend_host(dev);
-	if (rc)
-		return rc;
-
-	if (pdata && pdata->suspend) {
-		rc = pdata->suspend(dev);
-		if (rc)
-			goto resume_host;
-	}
-
-	ahci_platform_disable_resources(hpriv);
-
-	return 0;
-
-resume_host:
-	ahci_platform_resume_host(dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-
-/**
- * ahci_platform_resume - Resume an ahci-platform device
- * @dev: the platform device to resume
- *
- * This function enables all the resources of the device followed by
- * resuming the host associated with the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume(struct device *dev)
-{
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	int rc;
-
-	rc = ahci_platform_enable_resources(hpriv);
-	if (rc)
-		return rc;
-
-	if (pdata && pdata->resume) {
-		rc = pdata->resume(dev);
-		if (rc)
-			goto disable_resources;
-	}
-
-	rc = ahci_platform_resume_host(dev);
-	if (rc)
-		goto disable_resources;
-
-	/* We resumed so update PM runtime state */
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	return 0;
-
-disable_resources:
-	ahci_platform_disable_resources(hpriv);
-
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume);
-#endif
-
 static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
 			 ahci_platform_resume);
 
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
new file mode 100644
index 0000000..7cb3a85
--- /dev/null
+++ b/drivers/ata/libahci_platform.c
@@ -0,0 +1,541 @@
+/*
+ * AHCI SATA platform library
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include "ahci.h"
+
+static void ahci_host_stop(struct ata_host *host);
+
+struct ata_port_operations ahci_platform_ops = {
+	.inherits	= &ahci_ops,
+	.host_stop	= ahci_host_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_platform_ops);
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT("ahci_platform"),
+};
+
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting at
+ * index 0. If any clk fails to enable it disables all the clks already
+ * enabled in reverse order, and then returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+	int c, rc;
+
+	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+		rc = clk_prepare_enable(hpriv->clks[c]);
+		if (rc)
+			goto disable_unprepare_clk;
+	}
+	return 0;
+
+disable_unprepare_clk:
+	while (--c >= 0)
+		clk_disable_unprepare(hpriv->clks[c]);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+	int c;
+
+	for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+		if (hpriv->clks[c])
+			clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in the
+ * following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
+ *
+ * If resource enabling fails at any point the previous enabled resources
+ * are disabled in reverse order.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+	int rc;
+
+	if (hpriv->target_pwr) {
+		rc = regulator_enable(hpriv->target_pwr);
+		if (rc)
+			return rc;
+	}
+
+	rc = ahci_platform_enable_clks(hpriv);
+	if (rc)
+		goto disable_regulator;
+
+	if (hpriv->phy) {
+		rc = phy_init(hpriv->phy);
+		if (rc)
+			goto disable_clks;
+
+		rc = phy_power_on(hpriv->phy);
+		if (rc) {
+			phy_exit(hpriv->phy);
+			goto disable_clks;
+		}
+	}
+
+	return 0;
+
+disable_clks:
+	ahci_platform_disable_clks(hpriv);
+
+disable_regulator:
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in the
+ * following order:
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+	if (hpriv->phy) {
+		phy_power_off(hpriv->phy);
+		phy_exit(hpriv->phy);
+	}
+
+	ahci_platform_disable_clks(hpriv);
+
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+	struct ahci_host_priv *hpriv = res;
+	int c;
+
+	if (hpriv->got_runtime_pm) {
+		pm_runtime_put_sync(dev);
+		pm_runtime_disable(dev);
+	}
+
+	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+		clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the following
+ * resources, storing a reference to them inside the returned struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ *    or for non devicetree enabled platforms a single clock
+ *	4) phy (optional)
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	struct clk *clk;
+	int i, rc = -ENOMEM;
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return ERR_PTR(-ENOMEM);
+
+	hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+			     GFP_KERNEL);
+	if (!hpriv)
+		goto err_out;
+
+	devres_add(dev, hpriv);
+
+	hpriv->mmio = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(hpriv->mmio)) {
+		dev_err(dev, "no mmio space\n");
+		rc = PTR_ERR(hpriv->mmio);
+		goto err_out;
+	}
+
+	hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+	if (IS_ERR(hpriv->target_pwr)) {
+		rc = PTR_ERR(hpriv->target_pwr);
+		if (rc == -EPROBE_DEFER)
+			goto err_out;
+		hpriv->target_pwr = NULL;
+	}
+
+	for (i = 0; i < AHCI_MAX_CLKS; i++) {
+		/*
+		 * For now we must use clk_get(dev, NULL) for the first clock,
+		 * because some platforms (da850, spear13xx) are not yet
+		 * converted to use devicetree for clocks.  For new platforms
+		 * this is equivalent to of_clk_get(dev->of_node, 0).
+		 */
+		if (i == 0)
+			clk = clk_get(dev, NULL);
+		else
+			clk = of_clk_get(dev->of_node, i);
+
+		if (IS_ERR(clk)) {
+			rc = PTR_ERR(clk);
+			if (rc == -EPROBE_DEFER)
+				goto err_out;
+			break;
+		}
+		hpriv->clks[i] = clk;
+	}
+
+	hpriv->phy = devm_phy_get(dev, "sata-phy");
+	if (IS_ERR(hpriv->phy)) {
+		rc = PTR_ERR(hpriv->phy);
+		switch (rc) {
+		case -ENODEV:
+		case -ENOSYS:
+			/* continue normally */
+			hpriv->phy = NULL;
+			break;
+
+		case -EPROBE_DEFER:
+			goto err_out;
+
+		default:
+			dev_err(dev, "couldn't get sata-phy\n");
+			goto err_out;
+		}
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+	hpriv->got_runtime_pm = true;
+
+	devres_remove_group(dev, NULL);
+	return hpriv;
+
+err_out:
+	devres_release_group(dev, NULL);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+			    struct ahci_host_priv *hpriv,
+			    const struct ata_port_info *pi_template,
+			    unsigned int force_port_map,
+			    unsigned int mask_port_map)
+{
+	struct device *dev = &pdev->dev;
+	struct ata_port_info pi = *pi_template;
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	struct ata_host *host;
+	int i, irq, n_ports, rc;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(dev, "no irq\n");
+		return -EINVAL;
+	}
+
+	/* prepare host */
+	hpriv->flags |= (unsigned long)pi.private_data;
+
+	ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
+	if (hpriv->cap & HOST_CAP_NCQ)
+		pi.flags |= ATA_FLAG_NCQ;
+
+	if (hpriv->cap & HOST_CAP_PMP)
+		pi.flags |= ATA_FLAG_PMP;
+
+	ahci_set_em_messages(hpriv, &pi);
+
+	/* CAP.NP sometimes indicate the index of the last enabled
+	 * port, at other times, that of the last possible port, so
+	 * determining the maximum port number requires looking at
+	 * both CAP.NP and port_map.
+	 */
+	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
+	host->private_data = hpriv;
+
+	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+		host->flags |= ATA_HOST_PARALLEL_SCAN;
+	else
+		dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
+
+	if (pi.flags & ATA_FLAG_EM)
+		ahci_reset_em(host);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		ata_port_desc(ap, "mmio %pR",
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+		/* set enclosure management message type */
+		if (ap->flags & ATA_FLAG_EM)
+			ap->em_message_type = hpriv->em_msg_type;
+
+		/* disabled/not-implemented port */
+		if (!(hpriv->port_map & (1 << i)))
+			ap->ops = &ata_dummy_port_ops;
+	}
+
+	rc = ahci_reset_controller(host);
+	if (rc)
+		return rc;
+
+	ahci_init_controller(host);
+	ahci_print_info(host, "platform");
+
+	return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+				 &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static void ahci_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	if (pdata && pdata->exit)
+		pdata->exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 ctl;
+
+	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+		dev_err(dev, "firmware update required for suspend/resume\n");
+		return -EIO;
+	}
+
+	/*
+	 * AHCI spec rev1.1 section 8.3.3:
+	 * Software must disable interrupts prior to requesting a
+	 * transition of the HBA to D3 state.
+	 */
+	ctl = readl(mmio + HOST_CTL);
+	ctl &= ~HOST_IRQ_EN;
+	writel(ctl, mmio + HOST_CTL);
+	readl(mmio + HOST_CTL); /* flush */
+
+	return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an ahci-platform
+ * host, note any necessary resources (ie clks, phy, etc.)  must be
+ * initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	int rc;
+
+	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+		rc = ahci_reset_controller(host);
+		if (rc)
+			return rc;
+
+		ahci_init_controller(host);
+	}
+
+	ata_host_resume(host);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed by
+ * disabling all the resources of the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_suspend_host(dev);
+	if (rc)
+		return rc;
+
+	if (pdata && pdata->suspend) {
+		rc = pdata->suspend(dev);
+		if (rc)
+			goto resume_host;
+	}
+
+	ahci_platform_disable_resources(hpriv);
+
+	return 0;
+
+resume_host:
+	ahci_platform_resume_host(dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
+
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	if (pdata && pdata->resume) {
+		rc = pdata->resume(dev);
+		if (rc)
+			goto disable_resources;
+	}
+
+	rc = ahci_platform_resume_host(dev);
+	if (rc)
+		goto disable_resources;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
+#endif
+
+MODULE_DESCRIPTION("AHCI SATA platform library");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
-- 
1.8.2.3

[PATCH 2/4] ata: move library code from ahci_platform.c to libahci_platform.c

[Bartlomiej Zolnierkiewicz]

Move AHCI platform library code from ahci_platform.c to
libahci_platform.c and fix dependencies for ahci_st,
ahci_imx and ahci_sunxi drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig            |   5 +-
 drivers/ata/Makefile           |   8 +-
 drivers/ata/ahci_platform.c    | 515 ---------------------------------------
 drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 547 insertions(+), 522 deletions(-)
 create mode 100644 drivers/ata/libahci_platform.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c4db48c..371e8890 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -99,7 +99,6 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_ST
 	tristate "ST AHCI SATA support"
-	depends on SATA_AHCI_PLATFORM
 	depends on ARCH_STI
 	help
 	  This option enables support for ST AHCI SATA controller.
@@ -108,7 +107,7 @@ config AHCI_ST
 
 config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
-	depends on SATA_AHCI_PLATFORM && MFD_SYSCON
+	depends on MFD_SYSCON
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -117,7 +116,7 @@ config AHCI_IMX
 
 config AHCI_SUNXI
 	tristate "Allwinner sunxi AHCI SATA support"
-	depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
+	depends on ARCH_SUNXI
 	help
 	  This option enables support for the Allwinner sunxi SoC's
 	  onboard AHCI SATA.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index e20148c..6123e64 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -4,15 +4,15 @@ obj-$(CONFIG_ATA)		+= libata.o
 # non-SFF interface
 obj-$(CONFIG_SATA_AHCI)		+= ahci.o libahci.o
 obj-$(CONFIG_SATA_ACARD_AHCI)	+= acard-ahci.o libahci.o
-obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
 obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
-obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o
-obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o
-obj-$(CONFIG_AHCI_ST)		+= ahci_st.o
+obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 7bd6adf..ef67e79 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -12,28 +12,15 @@
  * any later version.
  */
 
-#include <linux/clk.h>
 #include <linux/kernel.h>
-#include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
-#include <linux/phy/phy.h>
-#include <linux/pm_runtime.h>
 #include "ahci.h"
 
-static void ahci_host_stop(struct ata_host *host);
-
-struct ata_port_operations ahci_platform_ops = {
-	.inherits	= &ahci_ops,
-	.host_stop	= ahci_host_stop,
-};
-EXPORT_SYMBOL_GPL(ahci_platform_ops);
-
 static const struct ata_port_info ahci_port_info = {
 	.flags		= AHCI_FLAG_COMMON,
 	.pio_mask	= ATA_PIO4,
@@ -41,345 +28,6 @@ static const struct ata_port_info ahci_port_info = {
 	.port_ops	= &ahci_platform_ops,
 };
 
-static struct scsi_host_template ahci_platform_sht = {
-	AHCI_SHT("ahci_platform"),
-};
-
-/**
- * ahci_platform_enable_clks - Enable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function enables all the clks found in hpriv->clks, starting at
- * index 0. If any clk fails to enable it disables all the clks already
- * enabled in reverse order, and then returns an error.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
-{
-	int c, rc;
-
-	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
-		rc = clk_prepare_enable(hpriv->clks[c]);
-		if (rc)
-			goto disable_unprepare_clk;
-	}
-	return 0;
-
-disable_unprepare_clk:
-	while (--c >= 0)
-		clk_disable_unprepare(hpriv->clks[c]);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
-
-/**
- * ahci_platform_disable_clks - Disable platform clocks
- * @hpriv: host private area to store config values
- *
- * This function disables all the clks found in hpriv->clks, in reverse
- * order of ahci_platform_enable_clks (starting at the end of the array).
- */
-void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
-{
-	int c;
-
-	for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
-		if (hpriv->clks[c])
-			clk_disable_unprepare(hpriv->clks[c]);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
-
-/**
- * ahci_platform_enable_resources - Enable platform resources
- * @hpriv: host private area to store config values
- *
- * This function enables all ahci_platform managed resources in the
- * following order:
- * 1) Regulator
- * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phy
- *
- * If resource enabling fails at any point the previous enabled resources
- * are disabled in reverse order.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
-{
-	int rc;
-
-	if (hpriv->target_pwr) {
-		rc = regulator_enable(hpriv->target_pwr);
-		if (rc)
-			return rc;
-	}
-
-	rc = ahci_platform_enable_clks(hpriv);
-	if (rc)
-		goto disable_regulator;
-
-	if (hpriv->phy) {
-		rc = phy_init(hpriv->phy);
-		if (rc)
-			goto disable_clks;
-
-		rc = phy_power_on(hpriv->phy);
-		if (rc) {
-			phy_exit(hpriv->phy);
-			goto disable_clks;
-		}
-	}
-
-	return 0;
-
-disable_clks:
-	ahci_platform_disable_clks(hpriv);
-
-disable_regulator:
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
-
-/**
- * ahci_platform_disable_resources - Disable platform resources
- * @hpriv: host private area to store config values
- *
- * This function disables all ahci_platform managed resources in the
- * following order:
- * 1) Phy
- * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
- */
-void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
-{
-	if (hpriv->phy) {
-		phy_power_off(hpriv->phy);
-		phy_exit(hpriv->phy);
-	}
-
-	ahci_platform_disable_clks(hpriv);
-
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-
-static void ahci_platform_put_resources(struct device *dev, void *res)
-{
-	struct ahci_host_priv *hpriv = res;
-	int c;
-
-	if (hpriv->got_runtime_pm) {
-		pm_runtime_put_sync(dev);
-		pm_runtime_disable(dev);
-	}
-
-	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
-		clk_put(hpriv->clks[c]);
-}
-
-/**
- * ahci_platform_get_resources - Get platform resources
- * @pdev: platform device to get resources for
- *
- * This function allocates an ahci_host_priv struct, and gets the following
- * resources, storing a reference to them inside the returned struct:
- *
- * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
- * 2) regulator for controlling the targets power (optional)
- * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
- *    or for non devicetree enabled platforms a single clock
- *	4) phy (optional)
- *
- * RETURNS:
- * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
- */
-struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct ahci_host_priv *hpriv;
-	struct clk *clk;
-	int i, rc = -ENOMEM;
-
-	if (!devres_open_group(dev, NULL, GFP_KERNEL))
-		return ERR_PTR(-ENOMEM);
-
-	hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
-			     GFP_KERNEL);
-	if (!hpriv)
-		goto err_out;
-
-	devres_add(dev, hpriv);
-
-	hpriv->mmio = devm_ioremap_resource(dev,
-			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
-	if (IS_ERR(hpriv->mmio)) {
-		dev_err(dev, "no mmio space\n");
-		rc = PTR_ERR(hpriv->mmio);
-		goto err_out;
-	}
-
-	hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
-	if (IS_ERR(hpriv->target_pwr)) {
-		rc = PTR_ERR(hpriv->target_pwr);
-		if (rc == -EPROBE_DEFER)
-			goto err_out;
-		hpriv->target_pwr = NULL;
-	}
-
-	for (i = 0; i < AHCI_MAX_CLKS; i++) {
-		/*
-		 * For now we must use clk_get(dev, NULL) for the first clock,
-		 * because some platforms (da850, spear13xx) are not yet
-		 * converted to use devicetree for clocks.  For new platforms
-		 * this is equivalent to of_clk_get(dev->of_node, 0).
-		 */
-		if (i == 0)
-			clk = clk_get(dev, NULL);
-		else
-			clk = of_clk_get(dev->of_node, i);
-
-		if (IS_ERR(clk)) {
-			rc = PTR_ERR(clk);
-			if (rc == -EPROBE_DEFER)
-				goto err_out;
-			break;
-		}
-		hpriv->clks[i] = clk;
-	}
-
-	hpriv->phy = devm_phy_get(dev, "sata-phy");
-	if (IS_ERR(hpriv->phy)) {
-		rc = PTR_ERR(hpriv->phy);
-		switch (rc) {
-		case -ENODEV:
-		case -ENOSYS:
-			/* continue normally */
-			hpriv->phy = NULL;
-			break;
-
-		case -EPROBE_DEFER:
-			goto err_out;
-
-		default:
-			dev_err(dev, "couldn't get sata-phy\n");
-			goto err_out;
-		}
-	}
-
-	pm_runtime_enable(dev);
-	pm_runtime_get_sync(dev);
-	hpriv->got_runtime_pm = true;
-
-	devres_remove_group(dev, NULL);
-	return hpriv;
-
-err_out:
-	devres_release_group(dev, NULL);
-	return ERR_PTR(rc);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
-
-/**
- * ahci_platform_init_host - Bring up an ahci-platform host
- * @pdev: platform device pointer for the host
- * @hpriv: ahci-host private data for the host
- * @pi_template: template for the ata_port_info to use
- * @force_port_map: param passed to ahci_save_initial_config
- * @mask_port_map: param passed to ahci_save_initial_config
- *
- * This function does all the usual steps needed to bring up an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_init_host(struct platform_device *pdev,
-			    struct ahci_host_priv *hpriv,
-			    const struct ata_port_info *pi_template,
-			    unsigned int force_port_map,
-			    unsigned int mask_port_map)
-{
-	struct device *dev = &pdev->dev;
-	struct ata_port_info pi = *pi_template;
-	const struct ata_port_info *ppi[] = { &pi, NULL };
-	struct ata_host *host;
-	int i, irq, n_ports, rc;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(dev, "no irq\n");
-		return -EINVAL;
-	}
-
-	/* prepare host */
-	hpriv->flags |= (unsigned long)pi.private_data;
-
-	ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
-
-	if (hpriv->cap & HOST_CAP_NCQ)
-		pi.flags |= ATA_FLAG_NCQ;
-
-	if (hpriv->cap & HOST_CAP_PMP)
-		pi.flags |= ATA_FLAG_PMP;
-
-	ahci_set_em_messages(hpriv, &pi);
-
-	/* CAP.NP sometimes indicate the index of the last enabled
-	 * port, at other times, that of the last possible port, so
-	 * determining the maximum port number requires looking at
-	 * both CAP.NP and port_map.
-	 */
-	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
-	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
-	if (!host)
-		return -ENOMEM;
-
-	host->private_data = hpriv;
-
-	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
-		host->flags |= ATA_HOST_PARALLEL_SCAN;
-	else
-		dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
-
-	if (pi.flags & ATA_FLAG_EM)
-		ahci_reset_em(host);
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		ata_port_desc(ap, "mmio %pR",
-			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
-		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
-		/* set enclosure management message type */
-		if (ap->flags & ATA_FLAG_EM)
-			ap->em_message_type = hpriv->em_msg_type;
-
-		/* disabled/not-implemented port */
-		if (!(hpriv->port_map & (1 << i)))
-			ap->ops = &ata_dummy_port_ops;
-	}
-
-	rc = ahci_reset_controller(host);
-	if (rc)
-		return rc;
-
-	ahci_init_controller(host);
-	ahci_print_info(host, "platform");
-
-	return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
-				 &ahci_platform_sht);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_init_host);
-
 static int ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -420,169 +68,6 @@ disable_resources:
 	return rc;
 }
 
-static void ahci_host_stop(struct ata_host *host)
-{
-	struct device *dev = host->dev;
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-
-	if (pdata && pdata->exit)
-		pdata->exit(dev);
-
-	ahci_platform_disable_resources(hpriv);
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * ahci_platform_suspend_host - Suspend an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to suspend an
- * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
- * must be disabled after calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend_host(struct device *dev)
-{
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 ctl;
-
-	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
-		dev_err(dev, "firmware update required for suspend/resume\n");
-		return -EIO;
-	}
-
-	/*
-	 * AHCI spec rev1.1 section 8.3.3:
-	 * Software must disable interrupts prior to requesting a
-	 * transition of the HBA to D3 state.
-	 */
-	ctl = readl(mmio + HOST_CTL);
-	ctl &= ~HOST_IRQ_EN;
-	writel(ctl, mmio + HOST_CTL);
-	readl(mmio + HOST_CTL); /* flush */
-
-	return ata_host_suspend(host, PMSG_SUSPEND);
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
-
-/**
- * ahci_platform_resume_host - Resume an ahci-platform host
- * @dev: device pointer for the host
- *
- * This function does all the usual steps needed to resume an ahci-platform
- * host, note any necessary resources (ie clks, phy, etc.)  must be
- * initialized / enabled before calling this.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume_host(struct device *dev)
-{
-	struct ata_host *host = dev_get_drvdata(dev);
-	int rc;
-
-	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(host);
-		if (rc)
-			return rc;
-
-		ahci_init_controller(host);
-	}
-
-	ata_host_resume(host);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
-
-/**
- * ahci_platform_suspend - Suspend an ahci-platform device
- * @dev: the platform device to suspend
- *
- * This function suspends the host associated with the device, followed by
- * disabling all the resources of the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_suspend(struct device *dev)
-{
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	int rc;
-
-	rc = ahci_platform_suspend_host(dev);
-	if (rc)
-		return rc;
-
-	if (pdata && pdata->suspend) {
-		rc = pdata->suspend(dev);
-		if (rc)
-			goto resume_host;
-	}
-
-	ahci_platform_disable_resources(hpriv);
-
-	return 0;
-
-resume_host:
-	ahci_platform_resume_host(dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-
-/**
- * ahci_platform_resume - Resume an ahci-platform device
- * @dev: the platform device to resume
- *
- * This function enables all the resources of the device followed by
- * resuming the host associated with the device.
- *
- * RETURNS:
- * 0 on success otherwise a negative error code
- */
-int ahci_platform_resume(struct device *dev)
-{
-	struct ahci_platform_data *pdata = dev_get_platdata(dev);
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	int rc;
-
-	rc = ahci_platform_enable_resources(hpriv);
-	if (rc)
-		return rc;
-
-	if (pdata && pdata->resume) {
-		rc = pdata->resume(dev);
-		if (rc)
-			goto disable_resources;
-	}
-
-	rc = ahci_platform_resume_host(dev);
-	if (rc)
-		goto disable_resources;
-
-	/* We resumed so update PM runtime state */
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	return 0;
-
-disable_resources:
-	ahci_platform_disable_resources(hpriv);
-
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ahci_platform_resume);
-#endif
-
 static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
 			 ahci_platform_resume);
 
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
new file mode 100644
index 0000000..7cb3a85
--- /dev/null
+++ b/drivers/ata/libahci_platform.c
@@ -0,0 +1,541 @@
+/*
+ * AHCI SATA platform library
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include "ahci.h"
+
+static void ahci_host_stop(struct ata_host *host);
+
+struct ata_port_operations ahci_platform_ops = {
+	.inherits	= &ahci_ops,
+	.host_stop	= ahci_host_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_platform_ops);
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT("ahci_platform"),
+};
+
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting at
+ * index 0. If any clk fails to enable it disables all the clks already
+ * enabled in reverse order, and then returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+	int c, rc;
+
+	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+		rc = clk_prepare_enable(hpriv->clks[c]);
+		if (rc)
+			goto disable_unprepare_clk;
+	}
+	return 0;
+
+disable_unprepare_clk:
+	while (--c >= 0)
+		clk_disable_unprepare(hpriv->clks[c]);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+	int c;
+
+	for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+		if (hpriv->clks[c])
+			clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in the
+ * following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
+ *
+ * If resource enabling fails at any point the previous enabled resources
+ * are disabled in reverse order.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+	int rc;
+
+	if (hpriv->target_pwr) {
+		rc = regulator_enable(hpriv->target_pwr);
+		if (rc)
+			return rc;
+	}
+
+	rc = ahci_platform_enable_clks(hpriv);
+	if (rc)
+		goto disable_regulator;
+
+	if (hpriv->phy) {
+		rc = phy_init(hpriv->phy);
+		if (rc)
+			goto disable_clks;
+
+		rc = phy_power_on(hpriv->phy);
+		if (rc) {
+			phy_exit(hpriv->phy);
+			goto disable_clks;
+		}
+	}
+
+	return 0;
+
+disable_clks:
+	ahci_platform_disable_clks(hpriv);
+
+disable_regulator:
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in the
+ * following order:
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+	if (hpriv->phy) {
+		phy_power_off(hpriv->phy);
+		phy_exit(hpriv->phy);
+	}
+
+	ahci_platform_disable_clks(hpriv);
+
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+	struct ahci_host_priv *hpriv = res;
+	int c;
+
+	if (hpriv->got_runtime_pm) {
+		pm_runtime_put_sync(dev);
+		pm_runtime_disable(dev);
+	}
+
+	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+		clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the following
+ * resources, storing a reference to them inside the returned struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ *    or for non devicetree enabled platforms a single clock
+ *	4) phy (optional)
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	struct clk *clk;
+	int i, rc = -ENOMEM;
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return ERR_PTR(-ENOMEM);
+
+	hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+			     GFP_KERNEL);
+	if (!hpriv)
+		goto err_out;
+
+	devres_add(dev, hpriv);
+
+	hpriv->mmio = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(hpriv->mmio)) {
+		dev_err(dev, "no mmio space\n");
+		rc = PTR_ERR(hpriv->mmio);
+		goto err_out;
+	}
+
+	hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+	if (IS_ERR(hpriv->target_pwr)) {
+		rc = PTR_ERR(hpriv->target_pwr);
+		if (rc == -EPROBE_DEFER)
+			goto err_out;
+		hpriv->target_pwr = NULL;
+	}
+
+	for (i = 0; i < AHCI_MAX_CLKS; i++) {
+		/*
+		 * For now we must use clk_get(dev, NULL) for the first clock,
+		 * because some platforms (da850, spear13xx) are not yet
+		 * converted to use devicetree for clocks.  For new platforms
+		 * this is equivalent to of_clk_get(dev->of_node, 0).
+		 */
+		if (i == 0)
+			clk = clk_get(dev, NULL);
+		else
+			clk = of_clk_get(dev->of_node, i);
+
+		if (IS_ERR(clk)) {
+			rc = PTR_ERR(clk);
+			if (rc == -EPROBE_DEFER)
+				goto err_out;
+			break;
+		}
+		hpriv->clks[i] = clk;
+	}
+
+	hpriv->phy = devm_phy_get(dev, "sata-phy");
+	if (IS_ERR(hpriv->phy)) {
+		rc = PTR_ERR(hpriv->phy);
+		switch (rc) {
+		case -ENODEV:
+		case -ENOSYS:
+			/* continue normally */
+			hpriv->phy = NULL;
+			break;
+
+		case -EPROBE_DEFER:
+			goto err_out;
+
+		default:
+			dev_err(dev, "couldn't get sata-phy\n");
+			goto err_out;
+		}
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+	hpriv->got_runtime_pm = true;
+
+	devres_remove_group(dev, NULL);
+	return hpriv;
+
+err_out:
+	devres_release_group(dev, NULL);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+			    struct ahci_host_priv *hpriv,
+			    const struct ata_port_info *pi_template,
+			    unsigned int force_port_map,
+			    unsigned int mask_port_map)
+{
+	struct device *dev = &pdev->dev;
+	struct ata_port_info pi = *pi_template;
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	struct ata_host *host;
+	int i, irq, n_ports, rc;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(dev, "no irq\n");
+		return -EINVAL;
+	}
+
+	/* prepare host */
+	hpriv->flags |= (unsigned long)pi.private_data;
+
+	ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
+	if (hpriv->cap & HOST_CAP_NCQ)
+		pi.flags |= ATA_FLAG_NCQ;
+
+	if (hpriv->cap & HOST_CAP_PMP)
+		pi.flags |= ATA_FLAG_PMP;
+
+	ahci_set_em_messages(hpriv, &pi);
+
+	/* CAP.NP sometimes indicate the index of the last enabled
+	 * port, at other times, that of the last possible port, so
+	 * determining the maximum port number requires looking at
+	 * both CAP.NP and port_map.
+	 */
+	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
+	host->private_data = hpriv;
+
+	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+		host->flags |= ATA_HOST_PARALLEL_SCAN;
+	else
+		dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
+
+	if (pi.flags & ATA_FLAG_EM)
+		ahci_reset_em(host);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		ata_port_desc(ap, "mmio %pR",
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+		/* set enclosure management message type */
+		if (ap->flags & ATA_FLAG_EM)
+			ap->em_message_type = hpriv->em_msg_type;
+
+		/* disabled/not-implemented port */
+		if (!(hpriv->port_map & (1 << i)))
+			ap->ops = &ata_dummy_port_ops;
+	}
+
+	rc = ahci_reset_controller(host);
+	if (rc)
+		return rc;
+
+	ahci_init_controller(host);
+	ahci_print_info(host, "platform");
+
+	return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+				 &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static void ahci_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	if (pdata && pdata->exit)
+		pdata->exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 ctl;
+
+	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+		dev_err(dev, "firmware update required for suspend/resume\n");
+		return -EIO;
+	}
+
+	/*
+	 * AHCI spec rev1.1 section 8.3.3:
+	 * Software must disable interrupts prior to requesting a
+	 * transition of the HBA to D3 state.
+	 */
+	ctl = readl(mmio + HOST_CTL);
+	ctl &= ~HOST_IRQ_EN;
+	writel(ctl, mmio + HOST_CTL);
+	readl(mmio + HOST_CTL); /* flush */
+
+	return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an ahci-platform
+ * host, note any necessary resources (ie clks, phy, etc.)  must be
+ * initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	int rc;
+
+	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+		rc = ahci_reset_controller(host);
+		if (rc)
+			return rc;
+
+		ahci_init_controller(host);
+	}
+
+	ata_host_resume(host);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed by
+ * disabling all the resources of the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_suspend_host(dev);
+	if (rc)
+		return rc;
+
+	if (pdata && pdata->suspend) {
+		rc = pdata->suspend(dev);
+		if (rc)
+			goto resume_host;
+	}
+
+	ahci_platform_disable_resources(hpriv);
+
+	return 0;
+
+resume_host:
+	ahci_platform_resume_host(dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
+
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	if (pdata && pdata->resume) {
+		rc = pdata->resume(dev);
+		if (rc)
+			goto disable_resources;
+	}
+
+	rc = ahci_platform_resume_host(dev);
+	if (rc)
+		goto disable_resources;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
+#endif
+
+MODULE_DESCRIPTION("AHCI SATA platform library");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
-- 
1.8.2.3

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

The new driver is named ahci_da850 and is only compile tested.  Once it
is tested on the real hardware and verified to work correctly, the legacy
platform code (which depends on the deprecated struct ahci_platform_data)
can be removed.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig      |   9 +++
 drivers/ata/Makefile     |   1 +
 drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 188 insertions(+)
 create mode 100644 drivers/ata/ahci_da850.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 371e8890..6379a00 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
 
 	  If unsure, say N.
 
+config AHCI_DA850
+	tristate "DaVinci DA850 AHCI SATA support (experimental)"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  This option enables support for the DaVinci DA850 SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6123e64..0646d83 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
+obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
new file mode 100644
index 0000000..da874699
--- /dev/null
+++ b/drivers/ata/ahci_da850.c
@@ -0,0 +1,178 @@
+/*
+ * DaVinci DA850 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+extern void __iomem *da8xx_syscfg1_base;
+#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
+#define DA8XX_PWRDN_REG		0x18
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG	0x178
+
+#define SATA_PHY_MPY(x)		((x) << 0)
+#define SATA_PHY_LOS(x)		((x) << 6)
+#define SATA_PHY_RXCDR(x)	((x) << 10)
+#define SATA_PHY_RXEQ(x)	((x) << 13)
+#define SATA_PHY_TXSWING(x)	((x) << 19)
+#define SATA_PHY_ENPLL(x)	((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+	KHZ_TO_HZ(300000),
+	KHZ_TO_HZ(250000),
+	0,			/* Reserved */
+	KHZ_TO_HZ(187500),
+	KHZ_TO_HZ(150000),
+	KHZ_TO_HZ(125000),
+	KHZ_TO_HZ(120000),
+	KHZ_TO_HZ(100000),
+	KHZ_TO_HZ(75000),
+	KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+	int i, ret;
+	unsigned int val;
+
+	da850_sata_clk = clk_get(dev, NULL);
+	if (IS_ERR(da850_sata_clk))
+		return PTR_ERR(da850_sata_clk);
+
+	ret = clk_prepare_enable(da850_sata_clk);
+	if (ret)
+		goto err0;
+
+	/* Enable SATA clock receiver */
+	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+	val &= ~BIT(0);
+	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+	/* Get the multiplier needed for 1.5GHz PLL output */
+	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+		if (da850_sata_xtal[i] == da850_sata_refclkpn)
+			break;
+
+	if (i == ARRAY_SIZE(da850_sata_xtal)) {
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	val = SATA_PHY_MPY(i + 1) |
+		SATA_PHY_LOS(1) |
+		SATA_PHY_RXCDR(4) |
+		SATA_PHY_RXEQ(1) |
+		SATA_PHY_TXSWING(3) |
+		SATA_PHY_ENPLL(1);
+
+	__raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+	return 0;
+
+err1:
+	clk_disable_unprepare(da850_sata_clk);
+err0:
+	clk_put(da850_sata_clk);
+	return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+	clk_disable_unprepare(da850_sata_clk);
+	clk_put(da850_sata_clk);
+}
+
+static void ahci_da850_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	da850_sata_exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+}
+
+static struct ata_port_operations ahci_da850_port_ops = {
+	.inherits	= &ahci_platform_ops,
+	.host_stop	= ahci_da850_host_stop,
+};
+
+static const struct ata_port_info ahci_da850_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_da850_port_ops,
+};
+
+static int ahci_da850_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	int rc;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	rc = da850_sata_init(dev, hpriv->mmio);
+	if (rc)
+		goto disable_resources;
+
+	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
+	if (rc)
+		goto sata_exit;
+
+	return 0;
+sata_exit:
+	da850_sata_exit(dev);
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+	return rc;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
+			 ahci_platform_resume);
+
+static struct platform_device_id ahci_da850_platform_ids[] = {
+	{ .name = "ahci" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, ahci_da850_platform_ids);
+
+static struct platform_driver ahci_da850_driver = {
+	.probe = ahci_da850_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = "ahci_da850",
+		.owner = THIS_MODULE,
+		.pm = &ahci_da850_pm_ops,
+	},
+	.id_table = ahci_da850_platform_ids,
+};
+module_platform_driver(ahci_da850_driver);
+
+MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_LICENSE("GPL");
-- 
1.8.2.3

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

The new driver is named ahci_da850 and is only compile tested.  Once it
is tested on the real hardware and verified to work correctly, the legacy
platform code (which depends on the deprecated struct ahci_platform_data)
can be removed.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig      |   9 +++
 drivers/ata/Makefile     |   1 +
 drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 188 insertions(+)
 create mode 100644 drivers/ata/ahci_da850.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 371e8890..6379a00 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
 
 	  If unsure, say N.
 
+config AHCI_DA850
+	tristate "DaVinci DA850 AHCI SATA support (experimental)"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  This option enables support for the DaVinci DA850 SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6123e64..0646d83 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
+obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
new file mode 100644
index 0000000..da874699
--- /dev/null
+++ b/drivers/ata/ahci_da850.c
@@ -0,0 +1,178 @@
+/*
+ * DaVinci DA850 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+extern void __iomem *da8xx_syscfg1_base;
+#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
+#define DA8XX_PWRDN_REG		0x18
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG	0x178
+
+#define SATA_PHY_MPY(x)		((x) << 0)
+#define SATA_PHY_LOS(x)		((x) << 6)
+#define SATA_PHY_RXCDR(x)	((x) << 10)
+#define SATA_PHY_RXEQ(x)	((x) << 13)
+#define SATA_PHY_TXSWING(x)	((x) << 19)
+#define SATA_PHY_ENPLL(x)	((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+	KHZ_TO_HZ(300000),
+	KHZ_TO_HZ(250000),
+	0,			/* Reserved */
+	KHZ_TO_HZ(187500),
+	KHZ_TO_HZ(150000),
+	KHZ_TO_HZ(125000),
+	KHZ_TO_HZ(120000),
+	KHZ_TO_HZ(100000),
+	KHZ_TO_HZ(75000),
+	KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+	int i, ret;
+	unsigned int val;
+
+	da850_sata_clk = clk_get(dev, NULL);
+	if (IS_ERR(da850_sata_clk))
+		return PTR_ERR(da850_sata_clk);
+
+	ret = clk_prepare_enable(da850_sata_clk);
+	if (ret)
+		goto err0;
+
+	/* Enable SATA clock receiver */
+	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+	val &= ~BIT(0);
+	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+	/* Get the multiplier needed for 1.5GHz PLL output */
+	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+		if (da850_sata_xtal[i] == da850_sata_refclkpn)
+			break;
+
+	if (i == ARRAY_SIZE(da850_sata_xtal)) {
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	val = SATA_PHY_MPY(i + 1) |
+		SATA_PHY_LOS(1) |
+		SATA_PHY_RXCDR(4) |
+		SATA_PHY_RXEQ(1) |
+		SATA_PHY_TXSWING(3) |
+		SATA_PHY_ENPLL(1);
+
+	__raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+	return 0;
+
+err1:
+	clk_disable_unprepare(da850_sata_clk);
+err0:
+	clk_put(da850_sata_clk);
+	return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+	clk_disable_unprepare(da850_sata_clk);
+	clk_put(da850_sata_clk);
+}
+
+static void ahci_da850_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	da850_sata_exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+}
+
+static struct ata_port_operations ahci_da850_port_ops = {
+	.inherits	= &ahci_platform_ops,
+	.host_stop	= ahci_da850_host_stop,
+};
+
+static const struct ata_port_info ahci_da850_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_da850_port_ops,
+};
+
+static int ahci_da850_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	int rc;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	rc = da850_sata_init(dev, hpriv->mmio);
+	if (rc)
+		goto disable_resources;
+
+	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
+	if (rc)
+		goto sata_exit;
+
+	return 0;
+sata_exit:
+	da850_sata_exit(dev);
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+	return rc;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
+			 ahci_platform_resume);
+
+static struct platform_device_id ahci_da850_platform_ids[] = {
+	{ .name = "ahci" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, ahci_da850_platform_ids);
+
+static struct platform_driver ahci_da850_driver = {
+	.probe = ahci_da850_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = "ahci_da850",
+		.owner = THIS_MODULE,
+		.pm = &ahci_da850_pm_ops,
+	},
+	.id_table = ahci_da850_platform_ids,
+};
+module_platform_driver(ahci_da850_driver);
+
+MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_LICENSE("GPL");
-- 
1.8.2.3

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Sekhar Nori]

Hi Bartlomiej,

On Tuesday 18 March 2014 12:01 AM, Bartlomiej Zolnierkiewicz wrote:
> The new driver is named ahci_da850 and is only compile tested.  Once it
> is tested on the real hardware and verified to work correctly, the legacy
> platform code (which depends on the deprecated struct ahci_platform_data)
> can be removed.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>

Thanks for the patch. I have been able to use your patch and verify SATA
functionality on DA850 EVM. I have some comments though.

> ---
>  drivers/ata/Kconfig      |   9 +++
>  drivers/ata/Makefile     |   1 +
>  drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 188 insertions(+)
>  create mode 100644 drivers/ata/ahci_da850.c
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 371e8890..6379a00 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
>  
>  	  If unsure, say N.
>  
> +config AHCI_DA850
> +	tristate "DaVinci DA850 AHCI SATA support (experimental)"
> +	depends on ARCH_DAVINCI_DA850
> +	help
> +	  This option enables support for the DaVinci DA850 SoC's
> +	  onboard AHCI SATA.
> +
> +	  If unsure, say N.
> +
>  config AHCI_ST
>  	tristate "ST AHCI SATA support"
>  	depends on ARCH_STI
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 6123e64..0646d83 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
>  obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
>  obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
>  obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
> +obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> new file mode 100644
> index 0000000..da874699
> --- /dev/null
> +++ b/drivers/ata/ahci_da850.c
> @@ -0,0 +1,178 @@
> +/*
> + * DaVinci DA850 AHCI SATA platform driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2, or (at your option)
> + * any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pm.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/libata.h>
> +#include <linux/ahci_platform.h>
> +#include "ahci.h"
> +
> +extern void __iomem *da8xx_syscfg1_base;

This platform specific extern symbol should not be used in drivers and
in fact checkpatch complains about it too. Can you instead get the
addresses you need as part of the device resources?

> +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> +#define DA8XX_PWRDN_REG		0x18
> +
> +/* SATA PHY Control Register offset from AHCI base */
> +#define SATA_P0PHYCR_REG	0x178
> +
> +#define SATA_PHY_MPY(x)		((x) << 0)
> +#define SATA_PHY_LOS(x)		((x) << 6)
> +#define SATA_PHY_RXCDR(x)	((x) << 10)
> +#define SATA_PHY_RXEQ(x)	((x) << 13)
> +#define SATA_PHY_TXSWING(x)	((x) << 19)
> +#define SATA_PHY_ENPLL(x)	((x) << 31)

These can be replaced with BIT(N)

> +
> +static struct clk *da850_sata_clk;
> +static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;

This should ideally be platform data. Since we are not going to add
anymore board files, I am not going to ask you to add one.

However, with the input value hard coded in driver, it does not make
sense to have the frequencies table and its traversal. Instead, I
suggest you hard-code the multiplier itself with a porting warning
comment. Later when the DT conversion happens and this becomes a DT
property, we can add back the logic for multiple multiplier settings.
The way it is now, the code looks superfluous.

> +
> +/* Supported DA850 SATA crystal frequencies */
> +#define KHZ_TO_HZ(freq) ((freq) * 1000)
> +static unsigned long da850_sata_xtal[] = {
> +	KHZ_TO_HZ(300000),
> +	KHZ_TO_HZ(250000),
> +	0,			/* Reserved */
> +	KHZ_TO_HZ(187500),
> +	KHZ_TO_HZ(150000),
> +	KHZ_TO_HZ(125000),
> +	KHZ_TO_HZ(120000),
> +	KHZ_TO_HZ(100000),
> +	KHZ_TO_HZ(75000),
> +	KHZ_TO_HZ(60000),
> +};
> +
> +static int da850_sata_init(struct device *dev, void __iomem *addr)
> +{
> +	int i, ret;
> +	unsigned int val;
> +
> +	da850_sata_clk = clk_get(dev, NULL);
> +	if (IS_ERR(da850_sata_clk))
> +		return PTR_ERR(da850_sata_clk);
> +
> +	ret = clk_prepare_enable(da850_sata_clk);
> +	if (ret)
> +		goto err0;

Please switch to pm_runtime instead of using the clock APIs directly.

> +
> +	/* Enable SATA clock receiver */
> +	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));

Use readl() or readl_relaxed() for endian-neutrality.

> +	val &= ~BIT(0);
> +	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> +
> +	/* Get the multiplier needed for 1.5GHz PLL output */
> +	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
> +		if (da850_sata_xtal[i] == da850_sata_refclkpn)
> +			break;
> +
> +	if (i == ARRAY_SIZE(da850_sata_xtal)) {
> +		ret = -EINVAL;
> +		goto err1;
> +	}
> +
> +	val = SATA_PHY_MPY(i + 1) |
> +		SATA_PHY_LOS(1) |
> +		SATA_PHY_RXCDR(4) |
> +		SATA_PHY_RXEQ(1) |
> +		SATA_PHY_TXSWING(3) |
> +		SATA_PHY_ENPLL(1);
> +
> +	__raw_writel(val, addr + SATA_P0PHYCR_REG);
> +
> +	return 0;
> +
> +err1:
> +	clk_disable_unprepare(da850_sata_clk);
> +err0:
> +	clk_put(da850_sata_clk);
> +	return ret;
> +}
> +
> +static void da850_sata_exit(struct device *dev)
> +{
> +	clk_disable_unprepare(da850_sata_clk);
> +	clk_put(da850_sata_clk);
> +}
> +
> +static void ahci_da850_host_stop(struct ata_host *host)
> +{
> +	struct device *dev = host->dev;
> +	struct ahci_host_priv *hpriv = host->private_data;
> +
> +	da850_sata_exit(dev);
> +
> +	ahci_platform_disable_resources(hpriv);
> +}
> +
> +static struct ata_port_operations ahci_da850_port_ops = {
> +	.inherits	= &ahci_platform_ops,
> +	.host_stop	= ahci_da850_host_stop,
> +};
> +
> +static const struct ata_port_info ahci_da850_port_info = {
> +	.flags		= AHCI_FLAG_COMMON,
> +	.pio_mask	= ATA_PIO4,
> +	.udma_mask	= ATA_UDMA6,
> +	.port_ops	= &ahci_da850_port_ops,
> +};
> +
> +static int ahci_da850_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct ahci_host_priv *hpriv;
> +	int rc;
> +
> +	hpriv = ahci_platform_get_resources(pdev);
> +	if (IS_ERR(hpriv))
> +		return PTR_ERR(hpriv);
> +
> +	rc = ahci_platform_enable_resources(hpriv);
> +	if (rc)
> +		return rc;
> +
> +	rc = da850_sata_init(dev, hpriv->mmio);
> +	if (rc)
> +		goto disable_resources;
> +
> +	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
> +	if (rc)
> +		goto sata_exit;
> +
> +	return 0;
> +sata_exit:
> +	da850_sata_exit(dev);
> +disable_resources:
> +	ahci_platform_disable_resources(hpriv);
> +	return rc;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
> +			 ahci_platform_resume);
> +
> +static struct platform_device_id ahci_da850_platform_ids[] = {
> +	{ .name = "ahci" },

I was not able to get this driver probed with this name (I guess that
was because the generic driver was picked instead?). Can you please
change it to "da850-sata"?

Thanks,
Sekhar

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Sekhar Nori]

Hi Bartlomiej,

On Tuesday 18 March 2014 12:01 AM, Bartlomiej Zolnierkiewicz wrote:
> The new driver is named ahci_da850 and is only compile tested.  Once it
> is tested on the real hardware and verified to work correctly, the legacy
> platform code (which depends on the deprecated struct ahci_platform_data)
> can be removed.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Thanks for the patch. I have been able to use your patch and verify SATA
functionality on DA850 EVM. I have some comments though.

> ---
>  drivers/ata/Kconfig      |   9 +++
>  drivers/ata/Makefile     |   1 +
>  drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 188 insertions(+)
>  create mode 100644 drivers/ata/ahci_da850.c
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 371e8890..6379a00 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
>  
>  	  If unsure, say N.
>  
> +config AHCI_DA850
> +	tristate "DaVinci DA850 AHCI SATA support (experimental)"
> +	depends on ARCH_DAVINCI_DA850
> +	help
> +	  This option enables support for the DaVinci DA850 SoC's
> +	  onboard AHCI SATA.
> +
> +	  If unsure, say N.
> +
>  config AHCI_ST
>  	tristate "ST AHCI SATA support"
>  	depends on ARCH_STI
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 6123e64..0646d83 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
>  obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
>  obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
>  obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
> +obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> new file mode 100644
> index 0000000..da874699
> --- /dev/null
> +++ b/drivers/ata/ahci_da850.c
> @@ -0,0 +1,178 @@
> +/*
> + * DaVinci DA850 AHCI SATA platform driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2, or (at your option)
> + * any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pm.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/libata.h>
> +#include <linux/ahci_platform.h>
> +#include "ahci.h"
> +
> +extern void __iomem *da8xx_syscfg1_base;

This platform specific extern symbol should not be used in drivers and
in fact checkpatch complains about it too. Can you instead get the
addresses you need as part of the device resources?

> +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> +#define DA8XX_PWRDN_REG		0x18
> +
> +/* SATA PHY Control Register offset from AHCI base */
> +#define SATA_P0PHYCR_REG	0x178
> +
> +#define SATA_PHY_MPY(x)		((x) << 0)
> +#define SATA_PHY_LOS(x)		((x) << 6)
> +#define SATA_PHY_RXCDR(x)	((x) << 10)
> +#define SATA_PHY_RXEQ(x)	((x) << 13)
> +#define SATA_PHY_TXSWING(x)	((x) << 19)
> +#define SATA_PHY_ENPLL(x)	((x) << 31)

These can be replaced with BIT(N)

> +
> +static struct clk *da850_sata_clk;
> +static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;

This should ideally be platform data. Since we are not going to add
anymore board files, I am not going to ask you to add one.

However, with the input value hard coded in driver, it does not make
sense to have the frequencies table and its traversal. Instead, I
suggest you hard-code the multiplier itself with a porting warning
comment. Later when the DT conversion happens and this becomes a DT
property, we can add back the logic for multiple multiplier settings.
The way it is now, the code looks superfluous.

> +
> +/* Supported DA850 SATA crystal frequencies */
> +#define KHZ_TO_HZ(freq) ((freq) * 1000)
> +static unsigned long da850_sata_xtal[] = {
> +	KHZ_TO_HZ(300000),
> +	KHZ_TO_HZ(250000),
> +	0,			/* Reserved */
> +	KHZ_TO_HZ(187500),
> +	KHZ_TO_HZ(150000),
> +	KHZ_TO_HZ(125000),
> +	KHZ_TO_HZ(120000),
> +	KHZ_TO_HZ(100000),
> +	KHZ_TO_HZ(75000),
> +	KHZ_TO_HZ(60000),
> +};
> +
> +static int da850_sata_init(struct device *dev, void __iomem *addr)
> +{
> +	int i, ret;
> +	unsigned int val;
> +
> +	da850_sata_clk = clk_get(dev, NULL);
> +	if (IS_ERR(da850_sata_clk))
> +		return PTR_ERR(da850_sata_clk);
> +
> +	ret = clk_prepare_enable(da850_sata_clk);
> +	if (ret)
> +		goto err0;

Please switch to pm_runtime instead of using the clock APIs directly.

> +
> +	/* Enable SATA clock receiver */
> +	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));

Use readl() or readl_relaxed() for endian-neutrality.

> +	val &= ~BIT(0);
> +	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> +
> +	/* Get the multiplier needed for 1.5GHz PLL output */
> +	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
> +		if (da850_sata_xtal[i] == da850_sata_refclkpn)
> +			break;
> +
> +	if (i == ARRAY_SIZE(da850_sata_xtal)) {
> +		ret = -EINVAL;
> +		goto err1;
> +	}
> +
> +	val = SATA_PHY_MPY(i + 1) |
> +		SATA_PHY_LOS(1) |
> +		SATA_PHY_RXCDR(4) |
> +		SATA_PHY_RXEQ(1) |
> +		SATA_PHY_TXSWING(3) |
> +		SATA_PHY_ENPLL(1);
> +
> +	__raw_writel(val, addr + SATA_P0PHYCR_REG);
> +
> +	return 0;
> +
> +err1:
> +	clk_disable_unprepare(da850_sata_clk);
> +err0:
> +	clk_put(da850_sata_clk);
> +	return ret;
> +}
> +
> +static void da850_sata_exit(struct device *dev)
> +{
> +	clk_disable_unprepare(da850_sata_clk);
> +	clk_put(da850_sata_clk);
> +}
> +
> +static void ahci_da850_host_stop(struct ata_host *host)
> +{
> +	struct device *dev = host->dev;
> +	struct ahci_host_priv *hpriv = host->private_data;
> +
> +	da850_sata_exit(dev);
> +
> +	ahci_platform_disable_resources(hpriv);
> +}
> +
> +static struct ata_port_operations ahci_da850_port_ops = {
> +	.inherits	= &ahci_platform_ops,
> +	.host_stop	= ahci_da850_host_stop,
> +};
> +
> +static const struct ata_port_info ahci_da850_port_info = {
> +	.flags		= AHCI_FLAG_COMMON,
> +	.pio_mask	= ATA_PIO4,
> +	.udma_mask	= ATA_UDMA6,
> +	.port_ops	= &ahci_da850_port_ops,
> +};
> +
> +static int ahci_da850_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct ahci_host_priv *hpriv;
> +	int rc;
> +
> +	hpriv = ahci_platform_get_resources(pdev);
> +	if (IS_ERR(hpriv))
> +		return PTR_ERR(hpriv);
> +
> +	rc = ahci_platform_enable_resources(hpriv);
> +	if (rc)
> +		return rc;
> +
> +	rc = da850_sata_init(dev, hpriv->mmio);
> +	if (rc)
> +		goto disable_resources;
> +
> +	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
> +	if (rc)
> +		goto sata_exit;
> +
> +	return 0;
> +sata_exit:
> +	da850_sata_exit(dev);
> +disable_resources:
> +	ahci_platform_disable_resources(hpriv);
> +	return rc;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
> +			 ahci_platform_resume);
> +
> +static struct platform_device_id ahci_da850_platform_ids[] = {
> +	{ .name = "ahci" },

I was not able to get this driver probed with this name (I guess that
was because the generic driver was picked instead?). Can you please
change it to "da850-sata"?

Thanks,
Sekhar

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Sekhar Nori]

Hi Bartlomiej,

On Tuesday 18 March 2014 12:01 AM, Bartlomiej Zolnierkiewicz wrote:
> The new driver is named ahci_da850 and is only compile tested.  Once it
> is tested on the real hardware and verified to work correctly, the legacy
> platform code (which depends on the deprecated struct ahci_platform_data)
> can be removed.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Thanks for the patch. I have been able to use your patch and verify SATA
functionality on DA850 EVM. I have some comments though.

> ---
>  drivers/ata/Kconfig      |   9 +++
>  drivers/ata/Makefile     |   1 +
>  drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 188 insertions(+)
>  create mode 100644 drivers/ata/ahci_da850.c
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 371e8890..6379a00 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
>  
>  	  If unsure, say N.
>  
> +config AHCI_DA850
> +	tristate "DaVinci DA850 AHCI SATA support (experimental)"
> +	depends on ARCH_DAVINCI_DA850
> +	help
> +	  This option enables support for the DaVinci DA850 SoC's
> +	  onboard AHCI SATA.
> +
> +	  If unsure, say N.
> +
>  config AHCI_ST
>  	tristate "ST AHCI SATA support"
>  	depends on ARCH_STI
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 6123e64..0646d83 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
>  obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
>  obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
>  obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
> +obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> new file mode 100644
> index 0000000..da874699
> --- /dev/null
> +++ b/drivers/ata/ahci_da850.c
> @@ -0,0 +1,178 @@
> +/*
> + * DaVinci DA850 AHCI SATA platform driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2, or (at your option)
> + * any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pm.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/libata.h>
> +#include <linux/ahci_platform.h>
> +#include "ahci.h"
> +
> +extern void __iomem *da8xx_syscfg1_base;

This platform specific extern symbol should not be used in drivers and
in fact checkpatch complains about it too. Can you instead get the
addresses you need as part of the device resources?

> +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> +#define DA8XX_PWRDN_REG		0x18
> +
> +/* SATA PHY Control Register offset from AHCI base */
> +#define SATA_P0PHYCR_REG	0x178
> +
> +#define SATA_PHY_MPY(x)		((x) << 0)
> +#define SATA_PHY_LOS(x)		((x) << 6)
> +#define SATA_PHY_RXCDR(x)	((x) << 10)
> +#define SATA_PHY_RXEQ(x)	((x) << 13)
> +#define SATA_PHY_TXSWING(x)	((x) << 19)
> +#define SATA_PHY_ENPLL(x)	((x) << 31)

These can be replaced with BIT(N)

> +
> +static struct clk *da850_sata_clk;
> +static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;

This should ideally be platform data. Since we are not going to add
anymore board files, I am not going to ask you to add one.

However, with the input value hard coded in driver, it does not make
sense to have the frequencies table and its traversal. Instead, I
suggest you hard-code the multiplier itself with a porting warning
comment. Later when the DT conversion happens and this becomes a DT
property, we can add back the logic for multiple multiplier settings.
The way it is now, the code looks superfluous.

> +
> +/* Supported DA850 SATA crystal frequencies */
> +#define KHZ_TO_HZ(freq) ((freq) * 1000)
> +static unsigned long da850_sata_xtal[] = {
> +	KHZ_TO_HZ(300000),
> +	KHZ_TO_HZ(250000),
> +	0,			/* Reserved */
> +	KHZ_TO_HZ(187500),
> +	KHZ_TO_HZ(150000),
> +	KHZ_TO_HZ(125000),
> +	KHZ_TO_HZ(120000),
> +	KHZ_TO_HZ(100000),
> +	KHZ_TO_HZ(75000),
> +	KHZ_TO_HZ(60000),
> +};
> +
> +static int da850_sata_init(struct device *dev, void __iomem *addr)
> +{
> +	int i, ret;
> +	unsigned int val;
> +
> +	da850_sata_clk = clk_get(dev, NULL);
> +	if (IS_ERR(da850_sata_clk))
> +		return PTR_ERR(da850_sata_clk);
> +
> +	ret = clk_prepare_enable(da850_sata_clk);
> +	if (ret)
> +		goto err0;

Please switch to pm_runtime instead of using the clock APIs directly.

> +
> +	/* Enable SATA clock receiver */
> +	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));

Use readl() or readl_relaxed() for endian-neutrality.

> +	val &= ~BIT(0);
> +	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> +
> +	/* Get the multiplier needed for 1.5GHz PLL output */
> +	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
> +		if (da850_sata_xtal[i] == da850_sata_refclkpn)
> +			break;
> +
> +	if (i == ARRAY_SIZE(da850_sata_xtal)) {
> +		ret = -EINVAL;
> +		goto err1;
> +	}
> +
> +	val = SATA_PHY_MPY(i + 1) |
> +		SATA_PHY_LOS(1) |
> +		SATA_PHY_RXCDR(4) |
> +		SATA_PHY_RXEQ(1) |
> +		SATA_PHY_TXSWING(3) |
> +		SATA_PHY_ENPLL(1);
> +
> +	__raw_writel(val, addr + SATA_P0PHYCR_REG);
> +
> +	return 0;
> +
> +err1:
> +	clk_disable_unprepare(da850_sata_clk);
> +err0:
> +	clk_put(da850_sata_clk);
> +	return ret;
> +}
> +
> +static void da850_sata_exit(struct device *dev)
> +{
> +	clk_disable_unprepare(da850_sata_clk);
> +	clk_put(da850_sata_clk);
> +}
> +
> +static void ahci_da850_host_stop(struct ata_host *host)
> +{
> +	struct device *dev = host->dev;
> +	struct ahci_host_priv *hpriv = host->private_data;
> +
> +	da850_sata_exit(dev);
> +
> +	ahci_platform_disable_resources(hpriv);
> +}
> +
> +static struct ata_port_operations ahci_da850_port_ops = {
> +	.inherits	= &ahci_platform_ops,
> +	.host_stop	= ahci_da850_host_stop,
> +};
> +
> +static const struct ata_port_info ahci_da850_port_info = {
> +	.flags		= AHCI_FLAG_COMMON,
> +	.pio_mask	= ATA_PIO4,
> +	.udma_mask	= ATA_UDMA6,
> +	.port_ops	= &ahci_da850_port_ops,
> +};
> +
> +static int ahci_da850_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct ahci_host_priv *hpriv;
> +	int rc;
> +
> +	hpriv = ahci_platform_get_resources(pdev);
> +	if (IS_ERR(hpriv))
> +		return PTR_ERR(hpriv);
> +
> +	rc = ahci_platform_enable_resources(hpriv);
> +	if (rc)
> +		return rc;
> +
> +	rc = da850_sata_init(dev, hpriv->mmio);
> +	if (rc)
> +		goto disable_resources;
> +
> +	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
> +	if (rc)
> +		goto sata_exit;
> +
> +	return 0;
> +sata_exit:
> +	da850_sata_exit(dev);
> +disable_resources:
> +	ahci_platform_disable_resources(hpriv);
> +	return rc;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
> +			 ahci_platform_resume);
> +
> +static struct platform_device_id ahci_da850_platform_ids[] = {
> +	{ .name = "ahci" },

I was not able to get this driver probed with this name (I guess that
was because the generic driver was picked instead?). Can you please
change it to "da850-sata"?

Thanks,
Sekhar

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

Hi,

On Thursday, March 20, 2014 01:41:28 PM Sekhar Nori wrote:
> Hi Bartlomiej,
> 
> On Tuesday 18 March 2014 12:01 AM, Bartlomiej Zolnierkiewicz wrote:
> > The new driver is named ahci_da850 and is only compile tested.  Once it
> > is tested on the real hardware and verified to work correctly, the legacy
> > platform code (which depends on the deprecated struct ahci_platform_data)
> > can be removed.
> > 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> Thanks for the patch. I have been able to use your patch and verify SATA
> functionality on DA850 EVM. I have some comments though.

Thanks for testing + quick reply.

> > ---
> >  drivers/ata/Kconfig      |   9 +++
> >  drivers/ata/Makefile     |   1 +
> >  drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 188 insertions(+)
> >  create mode 100644 drivers/ata/ahci_da850.c
> > 
> > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> > index 371e8890..6379a00 100644
> > --- a/drivers/ata/Kconfig
> > +++ b/drivers/ata/Kconfig
> > @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
> >  
> >  	  If unsure, say N.
> >  
> > +config AHCI_DA850
> > +	tristate "DaVinci DA850 AHCI SATA support (experimental)"
> > +	depends on ARCH_DAVINCI_DA850
> > +	help
> > +	  This option enables support for the DaVinci DA850 SoC's
> > +	  onboard AHCI SATA.
> > +
> > +	  If unsure, say N.
> > +
> >  config AHCI_ST
> >  	tristate "ST AHCI SATA support"
> >  	depends on ARCH_STI
> > diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> > index 6123e64..0646d83 100644
> > --- a/drivers/ata/Makefile
> > +++ b/drivers/ata/Makefile
> > @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
> >  obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
> >  obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
> >  obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
> > +obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
> >  obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
> >  obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
> >  obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
> > diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> > new file mode 100644
> > index 0000000..da874699
> > --- /dev/null
> > +++ b/drivers/ata/ahci_da850.c
> > @@ -0,0 +1,178 @@
> > +/*
> > + * DaVinci DA850 AHCI SATA platform driver
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2, or (at your option)
> > + * any later version.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/pm.h>
> > +#include <linux/device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/libata.h>
> > +#include <linux/ahci_platform.h>
> > +#include "ahci.h"
> > +
> > +extern void __iomem *da8xx_syscfg1_base;
> 
> This platform specific extern symbol should not be used in drivers and
> in fact checkpatch complains about it too. Can you instead get the
> addresses you need as part of the device resources?

This is problematic because it is system resource not particular device
resource.  I would prefer to wait with fixing it until the conversion to
the device tree.

> > +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> > +#define DA8XX_PWRDN_REG		0x18
> > +
> > +/* SATA PHY Control Register offset from AHCI base */
> > +#define SATA_P0PHYCR_REG	0x178
> > +
> > +#define SATA_PHY_MPY(x)		((x) << 0)
> > +#define SATA_PHY_LOS(x)		((x) << 6)
> > +#define SATA_PHY_RXCDR(x)	((x) << 10)
> > +#define SATA_PHY_RXEQ(x)	((x) << 13)
> > +#define SATA_PHY_TXSWING(x)	((x) << 19)
> > +#define SATA_PHY_ENPLL(x)	((x) << 31)
> 
> These can be replaced with BIT(N)

OK, I'll fix it.

> > +
> > +static struct clk *da850_sata_clk;
> > +static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;
> 
> This should ideally be platform data. Since we are not going to add
> anymore board files, I am not going to ask you to add one.
> 
> However, with the input value hard coded in driver, it does not make
> sense to have the frequencies table and its traversal. Instead, I
> suggest you hard-code the multiplier itself with a porting warning
> comment. Later when the DT conversion happens and this becomes a DT
> property, we can add back the logic for multiple multiplier settings.
> The way it is now, the code looks superfluous.

OK, will fix.

> > +
> > +/* Supported DA850 SATA crystal frequencies */
> > +#define KHZ_TO_HZ(freq) ((freq) * 1000)
> > +static unsigned long da850_sata_xtal[] = {
> > +	KHZ_TO_HZ(300000),
> > +	KHZ_TO_HZ(250000),
> > +	0,			/* Reserved */
> > +	KHZ_TO_HZ(187500),
> > +	KHZ_TO_HZ(150000),
> > +	KHZ_TO_HZ(125000),
> > +	KHZ_TO_HZ(120000),
> > +	KHZ_TO_HZ(100000),
> > +	KHZ_TO_HZ(75000),
> > +	KHZ_TO_HZ(60000),
> > +};
> > +
> > +static int da850_sata_init(struct device *dev, void __iomem *addr)
> > +{
> > +	int i, ret;
> > +	unsigned int val;
> > +
> > +	da850_sata_clk = clk_get(dev, NULL);
> > +	if (IS_ERR(da850_sata_clk))
> > +		return PTR_ERR(da850_sata_clk);
> > +
> > +	ret = clk_prepare_enable(da850_sata_clk);
> > +	if (ret)
> > +		goto err0;
> 
> Please switch to pm_runtime instead of using the clock APIs directly.

Could you please elaborate a bit more on this?

> > +
> > +	/* Enable SATA clock receiver */
> > +	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> 
> Use readl() or readl_relaxed() for endian-neutrality.

OK, I will use readl()/writel().

> > +	val &= ~BIT(0);
> > +	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> > +
> > +	/* Get the multiplier needed for 1.5GHz PLL output */
> > +	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
> > +		if (da850_sata_xtal[i] == da850_sata_refclkpn)
> > +			break;
> > +
> > +	if (i == ARRAY_SIZE(da850_sata_xtal)) {
> > +		ret = -EINVAL;
> > +		goto err1;
> > +	}
> > +
> > +	val = SATA_PHY_MPY(i + 1) |
> > +		SATA_PHY_LOS(1) |
> > +		SATA_PHY_RXCDR(4) |
> > +		SATA_PHY_RXEQ(1) |
> > +		SATA_PHY_TXSWING(3) |
> > +		SATA_PHY_ENPLL(1);
> > +
> > +	__raw_writel(val, addr + SATA_P0PHYCR_REG);
> > +
> > +	return 0;
> > +
> > +err1:
> > +	clk_disable_unprepare(da850_sata_clk);
> > +err0:
> > +	clk_put(da850_sata_clk);
> > +	return ret;
> > +}
> > +
> > +static void da850_sata_exit(struct device *dev)
> > +{
> > +	clk_disable_unprepare(da850_sata_clk);
> > +	clk_put(da850_sata_clk);
> > +}
> > +
> > +static void ahci_da850_host_stop(struct ata_host *host)
> > +{
> > +	struct device *dev = host->dev;
> > +	struct ahci_host_priv *hpriv = host->private_data;
> > +
> > +	da850_sata_exit(dev);
> > +
> > +	ahci_platform_disable_resources(hpriv);
> > +}
> > +
> > +static struct ata_port_operations ahci_da850_port_ops = {
> > +	.inherits	= &ahci_platform_ops,
> > +	.host_stop	= ahci_da850_host_stop,
> > +};
> > +
> > +static const struct ata_port_info ahci_da850_port_info = {
> > +	.flags		= AHCI_FLAG_COMMON,
> > +	.pio_mask	= ATA_PIO4,
> > +	.udma_mask	= ATA_UDMA6,
> > +	.port_ops	= &ahci_da850_port_ops,
> > +};
> > +
> > +static int ahci_da850_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct ahci_host_priv *hpriv;
> > +	int rc;
> > +
> > +	hpriv = ahci_platform_get_resources(pdev);
> > +	if (IS_ERR(hpriv))
> > +		return PTR_ERR(hpriv);
> > +
> > +	rc = ahci_platform_enable_resources(hpriv);
> > +	if (rc)
> > +		return rc;
> > +
> > +	rc = da850_sata_init(dev, hpriv->mmio);
> > +	if (rc)
> > +		goto disable_resources;
> > +
> > +	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
> > +	if (rc)
> > +		goto sata_exit;
> > +
> > +	return 0;
> > +sata_exit:
> > +	da850_sata_exit(dev);
> > +disable_resources:
> > +	ahci_platform_disable_resources(hpriv);
> > +	return rc;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
> > +			 ahci_platform_resume);
> > +
> > +static struct platform_device_id ahci_da850_platform_ids[] = {
> > +	{ .name = "ahci" },
> 
> I was not able to get this driver probed with this name (I guess that
> was because the generic driver was picked instead?). Can you please

Yes, the generic driver should be disabled to use this one.

> change it to "da850-sata"?

I prefer to remove the ids table (so the "ahci_da850" driver name is
used) and update the platform device name accordingly.  This would also
allow me to remove the old ahci_platform_data code in this patch.

Is this OK with you?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

Hi,

On Thursday, March 20, 2014 01:41:28 PM Sekhar Nori wrote:
> Hi Bartlomiej,
> 
> On Tuesday 18 March 2014 12:01 AM, Bartlomiej Zolnierkiewicz wrote:
> > The new driver is named ahci_da850 and is only compile tested.  Once it
> > is tested on the real hardware and verified to work correctly, the legacy
> > platform code (which depends on the deprecated struct ahci_platform_data)
> > can be removed.
> > 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> Thanks for the patch. I have been able to use your patch and verify SATA
> functionality on DA850 EVM. I have some comments though.

Thanks for testing + quick reply.

> > ---
> >  drivers/ata/Kconfig      |   9 +++
> >  drivers/ata/Makefile     |   1 +
> >  drivers/ata/ahci_da850.c | 178 +++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 188 insertions(+)
> >  create mode 100644 drivers/ata/ahci_da850.c
> > 
> > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> > index 371e8890..6379a00 100644
> > --- a/drivers/ata/Kconfig
> > +++ b/drivers/ata/Kconfig
> > @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
> >  
> >  	  If unsure, say N.
> >  
> > +config AHCI_DA850
> > +	tristate "DaVinci DA850 AHCI SATA support (experimental)"
> > +	depends on ARCH_DAVINCI_DA850
> > +	help
> > +	  This option enables support for the DaVinci DA850 SoC's
> > +	  onboard AHCI SATA.
> > +
> > +	  If unsure, say N.
> > +
> >  config AHCI_ST
> >  	tristate "ST AHCI SATA support"
> >  	depends on ARCH_STI
> > diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> > index 6123e64..0646d83 100644
> > --- a/drivers/ata/Makefile
> > +++ b/drivers/ata/Makefile
> > @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
> >  obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
> >  obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
> >  obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
> > +obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
> >  obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
> >  obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
> >  obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
> > diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> > new file mode 100644
> > index 0000000..da874699
> > --- /dev/null
> > +++ b/drivers/ata/ahci_da850.c
> > @@ -0,0 +1,178 @@
> > +/*
> > + * DaVinci DA850 AHCI SATA platform driver
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2, or (at your option)
> > + * any later version.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/pm.h>
> > +#include <linux/device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/libata.h>
> > +#include <linux/ahci_platform.h>
> > +#include "ahci.h"
> > +
> > +extern void __iomem *da8xx_syscfg1_base;
> 
> This platform specific extern symbol should not be used in drivers and
> in fact checkpatch complains about it too. Can you instead get the
> addresses you need as part of the device resources?

This is problematic because it is system resource not particular device
resource.  I would prefer to wait with fixing it until the conversion to
the device tree.

> > +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> > +#define DA8XX_PWRDN_REG		0x18
> > +
> > +/* SATA PHY Control Register offset from AHCI base */
> > +#define SATA_P0PHYCR_REG	0x178
> > +
> > +#define SATA_PHY_MPY(x)		((x) << 0)
> > +#define SATA_PHY_LOS(x)		((x) << 6)
> > +#define SATA_PHY_RXCDR(x)	((x) << 10)
> > +#define SATA_PHY_RXEQ(x)	((x) << 13)
> > +#define SATA_PHY_TXSWING(x)	((x) << 19)
> > +#define SATA_PHY_ENPLL(x)	((x) << 31)
> 
> These can be replaced with BIT(N)

OK, I'll fix it.

> > +
> > +static struct clk *da850_sata_clk;
> > +static unsigned long da850_sata_refclkpn = 100 * 1000 * 1000;
> 
> This should ideally be platform data. Since we are not going to add
> anymore board files, I am not going to ask you to add one.
> 
> However, with the input value hard coded in driver, it does not make
> sense to have the frequencies table and its traversal. Instead, I
> suggest you hard-code the multiplier itself with a porting warning
> comment. Later when the DT conversion happens and this becomes a DT
> property, we can add back the logic for multiple multiplier settings.
> The way it is now, the code looks superfluous.

OK, will fix.

> > +
> > +/* Supported DA850 SATA crystal frequencies */
> > +#define KHZ_TO_HZ(freq) ((freq) * 1000)
> > +static unsigned long da850_sata_xtal[] = {
> > +	KHZ_TO_HZ(300000),
> > +	KHZ_TO_HZ(250000),
> > +	0,			/* Reserved */
> > +	KHZ_TO_HZ(187500),
> > +	KHZ_TO_HZ(150000),
> > +	KHZ_TO_HZ(125000),
> > +	KHZ_TO_HZ(120000),
> > +	KHZ_TO_HZ(100000),
> > +	KHZ_TO_HZ(75000),
> > +	KHZ_TO_HZ(60000),
> > +};
> > +
> > +static int da850_sata_init(struct device *dev, void __iomem *addr)
> > +{
> > +	int i, ret;
> > +	unsigned int val;
> > +
> > +	da850_sata_clk = clk_get(dev, NULL);
> > +	if (IS_ERR(da850_sata_clk))
> > +		return PTR_ERR(da850_sata_clk);
> > +
> > +	ret = clk_prepare_enable(da850_sata_clk);
> > +	if (ret)
> > +		goto err0;
> 
> Please switch to pm_runtime instead of using the clock APIs directly.

Could you please elaborate a bit more on this?

> > +
> > +	/* Enable SATA clock receiver */
> > +	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> 
> Use readl() or readl_relaxed() for endian-neutrality.

OK, I will use readl()/writel().

> > +	val &= ~BIT(0);
> > +	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
> > +
> > +	/* Get the multiplier needed for 1.5GHz PLL output */
> > +	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
> > +		if (da850_sata_xtal[i] == da850_sata_refclkpn)
> > +			break;
> > +
> > +	if (i == ARRAY_SIZE(da850_sata_xtal)) {
> > +		ret = -EINVAL;
> > +		goto err1;
> > +	}
> > +
> > +	val = SATA_PHY_MPY(i + 1) |
> > +		SATA_PHY_LOS(1) |
> > +		SATA_PHY_RXCDR(4) |
> > +		SATA_PHY_RXEQ(1) |
> > +		SATA_PHY_TXSWING(3) |
> > +		SATA_PHY_ENPLL(1);
> > +
> > +	__raw_writel(val, addr + SATA_P0PHYCR_REG);
> > +
> > +	return 0;
> > +
> > +err1:
> > +	clk_disable_unprepare(da850_sata_clk);
> > +err0:
> > +	clk_put(da850_sata_clk);
> > +	return ret;
> > +}
> > +
> > +static void da850_sata_exit(struct device *dev)
> > +{
> > +	clk_disable_unprepare(da850_sata_clk);
> > +	clk_put(da850_sata_clk);
> > +}
> > +
> > +static void ahci_da850_host_stop(struct ata_host *host)
> > +{
> > +	struct device *dev = host->dev;
> > +	struct ahci_host_priv *hpriv = host->private_data;
> > +
> > +	da850_sata_exit(dev);
> > +
> > +	ahci_platform_disable_resources(hpriv);
> > +}
> > +
> > +static struct ata_port_operations ahci_da850_port_ops = {
> > +	.inherits	= &ahci_platform_ops,
> > +	.host_stop	= ahci_da850_host_stop,
> > +};
> > +
> > +static const struct ata_port_info ahci_da850_port_info = {
> > +	.flags		= AHCI_FLAG_COMMON,
> > +	.pio_mask	= ATA_PIO4,
> > +	.udma_mask	= ATA_UDMA6,
> > +	.port_ops	= &ahci_da850_port_ops,
> > +};
> > +
> > +static int ahci_da850_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct ahci_host_priv *hpriv;
> > +	int rc;
> > +
> > +	hpriv = ahci_platform_get_resources(pdev);
> > +	if (IS_ERR(hpriv))
> > +		return PTR_ERR(hpriv);
> > +
> > +	rc = ahci_platform_enable_resources(hpriv);
> > +	if (rc)
> > +		return rc;
> > +
> > +	rc = da850_sata_init(dev, hpriv->mmio);
> > +	if (rc)
> > +		goto disable_resources;
> > +
> > +	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
> > +	if (rc)
> > +		goto sata_exit;
> > +
> > +	return 0;
> > +sata_exit:
> > +	da850_sata_exit(dev);
> > +disable_resources:
> > +	ahci_platform_disable_resources(hpriv);
> > +	return rc;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
> > +			 ahci_platform_resume);
> > +
> > +static struct platform_device_id ahci_da850_platform_ids[] = {
> > +	{ .name = "ahci" },
> 
> I was not able to get this driver probed with this name (I guess that
> was because the generic driver was picked instead?). Can you please

Yes, the generic driver should be disabled to use this one.

> change it to "da850-sata"?

I prefer to remove the ids table (so the "ahci_da850" driver name is
used) and update the platform device name accordingly.  This would also
allow me to remove the old ahci_platform_data code in this patch.

Is this OK with you?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Sekhar Nori]

On Thursday 20 March 2014 06:27 PM, Bartlomiej Zolnierkiewicz wrote:

>>> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c

>>> +extern void __iomem *da8xx_syscfg1_base;
>>
>> This platform specific extern symbol should not be used in drivers and
>> in fact checkpatch complains about it too. Can you instead get the
>> addresses you need as part of the device resources?
> 
> This is problematic because it is system resource not particular device
> resource.  I would prefer to wait with fixing it until the conversion to
> the device tree.

The way you have it now, module build will fail because the symbol isn't
exported from platform code (and it should not be). The register is
"system level" but it is SATA specific and I see no problem in passing
it to the driver.

Conversion to device tree will not change anything until we throw out
the platform device code. That may or may not ever happen.

>>> +static int da850_sata_init(struct device *dev, void __iomem *addr)
>>> +{
>>> +	int i, ret;
>>> +	unsigned int val;
>>> +
>>> +	da850_sata_clk = clk_get(dev, NULL);
>>> +	if (IS_ERR(da850_sata_clk))
>>> +		return PTR_ERR(da850_sata_clk);
>>> +
>>> +	ret = clk_prepare_enable(da850_sata_clk);
>>> +	if (ret)
>>> +		goto err0;
>>
>> Please switch to pm_runtime instead of using the clock APIs directly.
> 
> Could you please elaborate a bit more on this?

I meant using pm_runtime_get_sync() to enable the clocks. There are many
examples in the kernel. drivers/watchdog/omap_wdt.c is one.
Documentation is available in Documentation/power/runtime_pm.txt

>>> +static struct platform_device_id ahci_da850_platform_ids[] = {
>>> +	{ .name = "ahci" },
>>
>> I was not able to get this driver probed with this name (I guess that
>> was because the generic driver was picked instead?). Can you please
> 
> Yes, the generic driver should be disabled to use this one.

>> change it to "da850-sata"?
> 
> I prefer to remove the ids table (so the "ahci_da850" driver name is
> used) and update the platform device name accordingly.  This would also
> allow me to remove the old ahci_platform_data code in this patch.
> 
> Is this OK with you?

Fine with me. Sounds good.

Thanks,
Sekhar

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Sekhar Nori]

On Thursday 20 March 2014 06:27 PM, Bartlomiej Zolnierkiewicz wrote:

>>> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c

>>> +extern void __iomem *da8xx_syscfg1_base;
>>
>> This platform specific extern symbol should not be used in drivers and
>> in fact checkpatch complains about it too. Can you instead get the
>> addresses you need as part of the device resources?
> 
> This is problematic because it is system resource not particular device
> resource.  I would prefer to wait with fixing it until the conversion to
> the device tree.

The way you have it now, module build will fail because the symbol isn't
exported from platform code (and it should not be). The register is
"system level" but it is SATA specific and I see no problem in passing
it to the driver.

Conversion to device tree will not change anything until we throw out
the platform device code. That may or may not ever happen.

>>> +static int da850_sata_init(struct device *dev, void __iomem *addr)
>>> +{
>>> +	int i, ret;
>>> +	unsigned int val;
>>> +
>>> +	da850_sata_clk = clk_get(dev, NULL);
>>> +	if (IS_ERR(da850_sata_clk))
>>> +		return PTR_ERR(da850_sata_clk);
>>> +
>>> +	ret = clk_prepare_enable(da850_sata_clk);
>>> +	if (ret)
>>> +		goto err0;
>>
>> Please switch to pm_runtime instead of using the clock APIs directly.
> 
> Could you please elaborate a bit more on this?

I meant using pm_runtime_get_sync() to enable the clocks. There are many
examples in the kernel. drivers/watchdog/omap_wdt.c is one.
Documentation is available in Documentation/power/runtime_pm.txt

>>> +static struct platform_device_id ahci_da850_platform_ids[] = {
>>> +	{ .name = "ahci" },
>>
>> I was not able to get this driver probed with this name (I guess that
>> was because the generic driver was picked instead?). Can you please
> 
> Yes, the generic driver should be disabled to use this one.

>> change it to "da850-sata"?
> 
> I prefer to remove the ids table (so the "ahci_da850" driver name is
> used) and update the platform device name accordingly.  This would also
> allow me to remove the old ahci_platform_data code in this patch.
> 
> Is this OK with you?

Fine with me. Sounds good.

Thanks,
Sekhar

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Sekhar Nori]

On Thursday 20 March 2014 06:27 PM, Bartlomiej Zolnierkiewicz wrote:

>>> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c

>>> +extern void __iomem *da8xx_syscfg1_base;
>>
>> This platform specific extern symbol should not be used in drivers and
>> in fact checkpatch complains about it too. Can you instead get the
>> addresses you need as part of the device resources?
> 
> This is problematic because it is system resource not particular device
> resource.  I would prefer to wait with fixing it until the conversion to
> the device tree.

The way you have it now, module build will fail because the symbol isn't
exported from platform code (and it should not be). The register is
"system level" but it is SATA specific and I see no problem in passing
it to the driver.

Conversion to device tree will not change anything until we throw out
the platform device code. That may or may not ever happen.

>>> +static int da850_sata_init(struct device *dev, void __iomem *addr)
>>> +{
>>> +	int i, ret;
>>> +	unsigned int val;
>>> +
>>> +	da850_sata_clk = clk_get(dev, NULL);
>>> +	if (IS_ERR(da850_sata_clk))
>>> +		return PTR_ERR(da850_sata_clk);
>>> +
>>> +	ret = clk_prepare_enable(da850_sata_clk);
>>> +	if (ret)
>>> +		goto err0;
>>
>> Please switch to pm_runtime instead of using the clock APIs directly.
> 
> Could you please elaborate a bit more on this?

I meant using pm_runtime_get_sync() to enable the clocks. There are many
examples in the kernel. drivers/watchdog/omap_wdt.c is one.
Documentation is available in Documentation/power/runtime_pm.txt

>>> +static struct platform_device_id ahci_da850_platform_ids[] = {
>>> +	{ .name = "ahci" },
>>
>> I was not able to get this driver probed with this name (I guess that
>> was because the generic driver was picked instead?). Can you please
> 
> Yes, the generic driver should be disabled to use this one.

>> change it to "da850-sata"?
> 
> I prefer to remove the ids table (so the "ahci_da850" driver name is
> used) and update the platform device name accordingly.  This would also
> allow me to remove the old ahci_platform_data code in this patch.
> 
> Is this OK with you?

Fine with me. Sounds good.

Thanks,
Sekhar

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

On Thursday, March 20, 2014 06:53:09 PM Sekhar Nori wrote:
> On Thursday 20 March 2014 06:27 PM, Bartlomiej Zolnierkiewicz wrote:
> 
> >>> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> 
> >>> +extern void __iomem *da8xx_syscfg1_base;
> >>
> >> This platform specific extern symbol should not be used in drivers and
> >> in fact checkpatch complains about it too. Can you instead get the
> >> addresses you need as part of the device resources?
> > 
> > This is problematic because it is system resource not particular device
> > resource.  I would prefer to wait with fixing it until the conversion to
> > the device tree.
> 
> The way you have it now, module build will fail because the symbol isn't
> exported from platform code (and it should not be). The register is
> "system level" but it is SATA specific and I see no problem in passing
> it to the driver.

OK, I'll try to fix it.

> Conversion to device tree will not change anything until we throw out
> the platform device code. That may or may not ever happen.
> 
> >>> +static int da850_sata_init(struct device *dev, void __iomem *addr)
> >>> +{
> >>> +	int i, ret;
> >>> +	unsigned int val;
> >>> +
> >>> +	da850_sata_clk = clk_get(dev, NULL);
> >>> +	if (IS_ERR(da850_sata_clk))
> >>> +		return PTR_ERR(da850_sata_clk);
> >>> +
> >>> +	ret = clk_prepare_enable(da850_sata_clk);
> >>> +	if (ret)
> >>> +		goto err0;
> >>
> >> Please switch to pm_runtime instead of using the clock APIs directly.
> > 
> > Could you please elaborate a bit more on this?
> 
> I meant using pm_runtime_get_sync() to enable the clocks. There are many
> examples in the kernel. drivers/watchdog/omap_wdt.c is one.
> Documentation is available in Documentation/power/runtime_pm.txt

What would be benefit of adding runtime PM methods (->runtime_suspend
and ->runtime_resume) just for enabling/disabling this clock on driver
->probe and ->remove methods?  Wouldn't it add complexity and additonal
dependency (on runtime PM) just for no gain?

Is the driver specific clock control even needed given the resource
handling in the generic AHCI platform library code (please see
ahci_platform_get_resources(),  ahci_platform_enable_resources() and
ahci_platform_disable_resources())?

[ Please also take a look at commit f1e70c2 ("ata/ahci_platform: Add
  clock framework support") which on Aug 27 2012 added generic clock
  control to ahci_platform driver but forgot to cleanup DA850 AHCI
  platform code.  The DA850 AHCI support was added much earlier by
  commit cbb2c961 ("davinci: da850: add support for SATA interface")
  on Jul 6 2011. ]

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

On Thursday, March 20, 2014 06:53:09 PM Sekhar Nori wrote:
> On Thursday 20 March 2014 06:27 PM, Bartlomiej Zolnierkiewicz wrote:
> 
> >>> diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
> 
> >>> +extern void __iomem *da8xx_syscfg1_base;
> >>
> >> This platform specific extern symbol should not be used in drivers and
> >> in fact checkpatch complains about it too. Can you instead get the
> >> addresses you need as part of the device resources?
> > 
> > This is problematic because it is system resource not particular device
> > resource.  I would prefer to wait with fixing it until the conversion to
> > the device tree.
> 
> The way you have it now, module build will fail because the symbol isn't
> exported from platform code (and it should not be). The register is
> "system level" but it is SATA specific and I see no problem in passing
> it to the driver.

OK, I'll try to fix it.

> Conversion to device tree will not change anything until we throw out
> the platform device code. That may or may not ever happen.
> 
> >>> +static int da850_sata_init(struct device *dev, void __iomem *addr)
> >>> +{
> >>> +	int i, ret;
> >>> +	unsigned int val;
> >>> +
> >>> +	da850_sata_clk = clk_get(dev, NULL);
> >>> +	if (IS_ERR(da850_sata_clk))
> >>> +		return PTR_ERR(da850_sata_clk);
> >>> +
> >>> +	ret = clk_prepare_enable(da850_sata_clk);
> >>> +	if (ret)
> >>> +		goto err0;
> >>
> >> Please switch to pm_runtime instead of using the clock APIs directly.
> > 
> > Could you please elaborate a bit more on this?
> 
> I meant using pm_runtime_get_sync() to enable the clocks. There are many
> examples in the kernel. drivers/watchdog/omap_wdt.c is one.
> Documentation is available in Documentation/power/runtime_pm.txt

What would be benefit of adding runtime PM methods (->runtime_suspend
and ->runtime_resume) just for enabling/disabling this clock on driver
->probe and ->remove methods?  Wouldn't it add complexity and additonal
dependency (on runtime PM) just for no gain?

Is the driver specific clock control even needed given the resource
handling in the generic AHCI platform library code (please see
ahci_platform_get_resources(),  ahci_platform_enable_resources() and
ahci_platform_disable_resources())?

[ Please also take a look at commit f1e70c2 ("ata/ahci_platform: Add
  clock framework support") which on Aug 27 2012 added generic clock
  control to ahci_platform driver but forgot to cleanup DA850 AHCI
  platform code.  The DA850 AHCI support was added much earlier by
  commit cbb2c961 ("davinci: da850: add support for SATA interface")
  on Jul 6 2011. ]

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

On Thursday, March 20, 2014 01:57:10 PM Bartlomiej Zolnierkiewicz wrote:

> > > +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> > > +#define DA8XX_PWRDN_REG		0x18
> > > +
> > > +/* SATA PHY Control Register offset from AHCI base */
> > > +#define SATA_P0PHYCR_REG	0x178
> > > +
> > > +#define SATA_PHY_MPY(x)		((x) << 0)
> > > +#define SATA_PHY_LOS(x)		((x) << 6)
> > > +#define SATA_PHY_RXCDR(x)	((x) << 10)
> > > +#define SATA_PHY_RXEQ(x)	((x) << 13)
> > > +#define SATA_PHY_TXSWING(x)	((x) << 19)
> > > +#define SATA_PHY_ENPLL(x)	((x) << 31)
> > 
> > These can be replaced with BIT(N)
> 
> OK, I'll fix it.

Uh, no, we can't use BIT() here.

BIT(N) does (1UL << (N)) and here we have ((N) << offset).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller

[Bartlomiej Zolnierkiewicz]

On Thursday, March 20, 2014 01:57:10 PM Bartlomiej Zolnierkiewicz wrote:

> > > +#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
> > > +#define DA8XX_PWRDN_REG		0x18
> > > +
> > > +/* SATA PHY Control Register offset from AHCI base */
> > > +#define SATA_P0PHYCR_REG	0x178
> > > +
> > > +#define SATA_PHY_MPY(x)		((x) << 0)
> > > +#define SATA_PHY_LOS(x)		((x) << 6)
> > > +#define SATA_PHY_RXCDR(x)	((x) << 10)
> > > +#define SATA_PHY_RXEQ(x)	((x) << 13)
> > > +#define SATA_PHY_TXSWING(x)	((x) << 19)
> > > +#define SATA_PHY_ENPLL(x)	((x) << 31)
> > 
> > These can be replaced with BIT(N)
> 
> OK, I'll fix it.

Uh, no, we can't use BIT() here.

BIT(N) does (1UL << (N)) and here we have ((N) << offset).

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Bartlomiej Zolnierkiewicz]

The new driver is named ahci_spear1340 and is only compile tested.  Once
it is tested on the real hardware and verified to work correctly, the legacy
platform code (which depends on the deprecated struct ahci_platform_data)
can be removed.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig          |   9 ++
 drivers/ata/Makefile         |   1 +
 drivers/ata/ahci_spear1340.c | 222 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 232 insertions(+)
 create mode 100644 drivers/ata/ahci_spear1340.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6379a00..32046d4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_DA850
 
 	  If unsure, say N.
 
+config AHCI_SPEAR1340
+	tristate "ST SPEAr1340 AHCI SATA support (experimental)"
+	depends on MACH_SPEAR1340
+	help
+	  This option enables support for the ST SPEAr1340 SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 0646d83..45e8df9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SPEAR1340)	+= ahci_spear1340.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
 
 # SFF w/ custom DMA
diff --git a/drivers/ata/ahci_spear1340.c b/drivers/ata/ahci_spear1340.c
new file mode 100644
index 0000000..f1d798e
--- /dev/null
+++ b/drivers/ata/ahci_spear1340.c
@@ -0,0 +1,222 @@
+/*
+ * ST SPEAr1340 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+#define VA_MISC_BASE				IOMEM(0xFD700000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+/* PCIE CFG MASks */
+#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+				 SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+				 SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+				 SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+				 SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+				 SPEAR1340_SATA_CFG_PM_CLK_EN | \
+				 SPEAR1340_SATA_CFG_POWERUP_RESET | \
+				 SPEAR1340_SATA_CFG_RX_CLK_EN | \
+				 SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+		(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+		 SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+		 SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+		(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+		(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+		 SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static void ahci_spear1340_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+	       SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel(readl(SPEAR1340_PCM_CFG) | 0x800, SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel(readl(SPEAR1340_PERIP1_SW_RST) & ~0x1000,
+	       SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+}
+
+static void ahci_spear1340_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel(readl(SPEAR1340_PERIP1_SW_RST) | 0x1000,
+	       SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel(readl(SPEAR1340_PCM_CFG) & ~0x800, SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+static void ahci_spear1340_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	ahci_spear1340_miphy_exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+}
+
+static struct ata_port_operations ahci_spear1340_port_ops = {
+	.inherits	= &ahci_platform_ops,
+	.host_stop	= ahci_spear1340_host_stop,
+};
+
+static const struct ata_port_info ahci_spear1340_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_spear1340_port_ops,
+};
+
+static int ahci_spear1340_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	int rc;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	ahci_spear1340_miphy_init(dev, hpriv->mmio);
+
+	rc = ahci_platform_init_host(pdev, hpriv,
+				     &ahci_spear1340_port_info, 0, 0);
+	if (rc)
+		goto miphy_exit;
+
+	return 0;
+miphy_exit:
+	ahci_spear1340_miphy_exit(dev);
+	ahci_platform_disable_resources(hpriv);
+	return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_spear1340_suspend(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_suspend_host(dev);
+	if (rc)
+		return rc;
+
+	if (dev->power.power_state.event != PM_EVENT_FREEZE)
+		ahci_spear1340_miphy_exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+
+	return 0;
+}
+
+static int ahci_spear1340_resume(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	if (dev->power.power_state.event != PM_EVENT_THAW)
+		ahci_spear1340_miphy_init(dev, NULL);
+
+	rc = ahci_platform_resume_host(dev);
+	if (rc)
+		goto disable_resources;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+
+	return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_spear1340_pm_ops, ahci_spear1340_suspend,
+			 ahci_spear1340_resume);
+
+static struct of_device_id ahci_spear1340_of_match[] = {
+	{ .compatible = "snps,spear-ahci" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ahci_spear1340_of_match);
+
+static struct platform_driver ahci_spear1340_driver = {
+	.probe = ahci_spear1340_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = "ahci_spear1340",
+		.owner = THIS_MODULE,
+		.of_match_table = ahci_spear1340_of_match,
+		.pm = &ahci_spear1340_pm_ops,
+	},
+};
+module_platform_driver(ahci_spear1340_driver);
+
+MODULE_DESCRIPTION("ST SPEAr1340 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_LICENSE("GPL");
-- 
1.8.2.3

[PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Bartlomiej Zolnierkiewicz]

The new driver is named ahci_spear1340 and is only compile tested.  Once
it is tested on the real hardware and verified to work correctly, the legacy
platform code (which depends on the deprecated struct ahci_platform_data)
can be removed.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig          |   9 ++
 drivers/ata/Makefile         |   1 +
 drivers/ata/ahci_spear1340.c | 222 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 232 insertions(+)
 create mode 100644 drivers/ata/ahci_spear1340.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6379a00..32046d4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_DA850
 
 	  If unsure, say N.
 
+config AHCI_SPEAR1340
+	tristate "ST SPEAr1340 AHCI SATA support (experimental)"
+	depends on MACH_SPEAR1340
+	help
+	  This option enables support for the ST SPEAr1340 SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 0646d83..45e8df9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SPEAR1340)	+= ahci_spear1340.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
 
 # SFF w/ custom DMA
diff --git a/drivers/ata/ahci_spear1340.c b/drivers/ata/ahci_spear1340.c
new file mode 100644
index 0000000..f1d798e
--- /dev/null
+++ b/drivers/ata/ahci_spear1340.c
@@ -0,0 +1,222 @@
+/*
+ * ST SPEAr1340 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+#define VA_MISC_BASE				IOMEM(0xFD700000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+/* PCIE CFG MASks */
+#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+				 SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+				 SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+				 SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+				 SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+				 SPEAR1340_SATA_CFG_PM_CLK_EN | \
+				 SPEAR1340_SATA_CFG_POWERUP_RESET | \
+				 SPEAR1340_SATA_CFG_RX_CLK_EN | \
+				 SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+		(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+		 SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+		 SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+		(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+		(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+		 SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static void ahci_spear1340_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+	       SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel(readl(SPEAR1340_PCM_CFG) | 0x800, SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel(readl(SPEAR1340_PERIP1_SW_RST) & ~0x1000,
+	       SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+}
+
+static void ahci_spear1340_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel(readl(SPEAR1340_PERIP1_SW_RST) | 0x1000,
+	       SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel(readl(SPEAR1340_PCM_CFG) & ~0x800, SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+static void ahci_spear1340_host_stop(struct ata_host *host)
+{
+	struct device *dev = host->dev;
+	struct ahci_host_priv *hpriv = host->private_data;
+
+	ahci_spear1340_miphy_exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+}
+
+static struct ata_port_operations ahci_spear1340_port_ops = {
+	.inherits	= &ahci_platform_ops,
+	.host_stop	= ahci_spear1340_host_stop,
+};
+
+static const struct ata_port_info ahci_spear1340_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_spear1340_port_ops,
+};
+
+static int ahci_spear1340_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	int rc;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	ahci_spear1340_miphy_init(dev, hpriv->mmio);
+
+	rc = ahci_platform_init_host(pdev, hpriv,
+				     &ahci_spear1340_port_info, 0, 0);
+	if (rc)
+		goto miphy_exit;
+
+	return 0;
+miphy_exit:
+	ahci_spear1340_miphy_exit(dev);
+	ahci_platform_disable_resources(hpriv);
+	return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_spear1340_suspend(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_suspend_host(dev);
+	if (rc)
+		return rc;
+
+	if (dev->power.power_state.event != PM_EVENT_FREEZE)
+		ahci_spear1340_miphy_exit(dev);
+
+	ahci_platform_disable_resources(hpriv);
+
+	return 0;
+}
+
+static int ahci_spear1340_resume(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	int rc;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	if (dev->power.power_state.event != PM_EVENT_THAW)
+		ahci_spear1340_miphy_init(dev, NULL);
+
+	rc = ahci_platform_resume_host(dev);
+	if (rc)
+		goto disable_resources;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+
+	return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_spear1340_pm_ops, ahci_spear1340_suspend,
+			 ahci_spear1340_resume);
+
+static struct of_device_id ahci_spear1340_of_match[] = {
+	{ .compatible = "snps,spear-ahci" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ahci_spear1340_of_match);
+
+static struct platform_driver ahci_spear1340_driver = {
+	.probe = ahci_spear1340_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = "ahci_spear1340",
+		.owner = THIS_MODULE,
+		.of_match_table = ahci_spear1340_of_match,
+		.pm = &ahci_spear1340_pm_ops,
+	},
+};
+module_platform_driver(ahci_spear1340_driver);
+
+MODULE_DESCRIPTION("ST SPEAr1340 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_LICENSE("GPL");
-- 
1.8.2.3

Re: [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Pratyush Anand]

On Tue, Mar 18, 2014 at 02:31:58AM +0800, Bartlomiej Zolnierkiewicz wrote:
> The new driver is named ahci_spear1340 and is only compile tested.  Once
> it is tested on the real hardware and verified to work correctly, the legacy
> platform code (which depends on the deprecated struct ahci_platform_data)
> can be removed.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This patch will not be needed any more, since SPEAr sata platform code has
already been cleaned up.

See:
https://lkml.org/lkml/2014/2/28/174

Regards
Pratyush

[PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Pratyush Anand]

On Tue, Mar 18, 2014 at 02:31:58AM +0800, Bartlomiej Zolnierkiewicz wrote:
> The new driver is named ahci_spear1340 and is only compile tested.  Once
> it is tested on the real hardware and verified to work correctly, the legacy
> platform code (which depends on the deprecated struct ahci_platform_data)
> can be removed.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This patch will not be needed any more, since SPEAr sata platform code has
already been cleaned up.

See:
https://lkml.org/lkml/2014/2/28/174

Regards
Pratyush

Re: [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Pratyush Anand]

On Tue, Mar 18, 2014 at 02:31:58AM +0800, Bartlomiej Zolnierkiewicz wrote:
> The new driver is named ahci_spear1340 and is only compile tested.  Once
> it is tested on the real hardware and verified to work correctly, the legacy
> platform code (which depends on the deprecated struct ahci_platform_data)
> can be removed.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This patch will not be needed any more, since SPEAr sata platform code has
already been cleaned up.

See:
https://lkml.org/lkml/2014/2/28/174

Regards
Pratyush

Re: [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Bartlomiej Zolnierkiewicz]

Hi,

On Thursday, March 20, 2014 02:27:17 PM Pratyush Anand wrote:
> On Tue, Mar 18, 2014 at 02:31:58AM +0800, Bartlomiej Zolnierkiewicz wrote:
> > The new driver is named ahci_spear1340 and is only compile tested.  Once
> > it is tested on the real hardware and verified to work correctly, the legacy
> > platform code (which depends on the deprecated struct ahci_platform_data)
> > can be removed.
> > 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> This patch will not be needed any more, since SPEAr sata platform code has
> already been cleaned up.
> 
> See:
> https://lkml.org/lkml/2014/2/28/174

OK.  Conversion of SPEAr1340 AHCI platform code to PHY driver is even better
than adding custom AHCI driver.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Bartlomiej Zolnierkiewicz]

Hi,

On Thursday, March 20, 2014 02:27:17 PM Pratyush Anand wrote:
> On Tue, Mar 18, 2014 at 02:31:58AM +0800, Bartlomiej Zolnierkiewicz wrote:
> > The new driver is named ahci_spear1340 and is only compile tested.  Once
> > it is tested on the real hardware and verified to work correctly, the legacy
> > platform code (which depends on the deprecated struct ahci_platform_data)
> > can be removed.
> > 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> This patch will not be needed any more, since SPEAr sata platform code has
> already been cleaned up.
> 
> See:
> https://lkml.org/lkml/2014/2/28/174

OK.  Conversion of SPEAr1340 AHCI platform code to PHY driver is even better
than adding custom AHCI driver.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller

[Bartlomiej Zolnierkiewicz]

Hi,

On Thursday, March 20, 2014 02:27:17 PM Pratyush Anand wrote:
> On Tue, Mar 18, 2014 at 02:31:58AM +0800, Bartlomiej Zolnierkiewicz wrote:
> > The new driver is named ahci_spear1340 and is only compile tested.  Once
> > it is tested on the real hardware and verified to work correctly, the legacy
> > platform code (which depends on the deprecated struct ahci_platform_data)
> > can be removed.
> > 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> This patch will not be needed any more, since SPEAr sata platform code has
> already been cleaned up.
> 
> See:
> https://lkml.org/lkml/2014/2/28/174

OK.  Conversion of SPEAr1340 AHCI platform code to PHY driver is even better
than adding custom AHCI driver.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Tejun Heo]

On Mon, Mar 17, 2014 at 07:31:54PM +0100, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patch series adds new-style AHCI platform drivers for DaVinci DA850
> AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
> adding these drivers it also fixes ahci_platform_data->suspend() handling
> (patch #1) and moves library AHCI platform code to its own file (patch #2).
> The new AHCI platform drivers are only compile tested (they are marked as
> experimental because of this) and I would ask somebody with the hardware
> to verify them (thanks!).

Nice cleanups.  I'll apply the patches once the drivers are verified
to work.

Thanks!

-- 
tejun

[PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Tejun Heo]

On Mon, Mar 17, 2014 at 07:31:54PM +0100, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patch series adds new-style AHCI platform drivers for DaVinci DA850
> AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
> adding these drivers it also fixes ahci_platform_data->suspend() handling
> (patch #1) and moves library AHCI platform code to its own file (patch #2).
> The new AHCI platform drivers are only compile tested (they are marked as
> experimental because of this) and I would ask somebody with the hardware
> to verify them (thanks!).

Nice cleanups.  I'll apply the patches once the drivers are verified
to work.

Thanks!

-- 
tejun

Re: [PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Hans de Goede]

Hi,

On 03/17/2014 07:31 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patch series adds new-style AHCI platform drivers for DaVinci DA850
> AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
> adding these drivers it also fixes ahci_platform_data->suspend() handling
> (patch #1) and moves library AHCI platform code to its own file (patch #2).
> The new AHCI platform drivers are only compile tested (they are marked as
> experimental because of this) and I would ask somebody with the hardware
> to verify them (thanks!).

Thanks for working on this.

Patches 1/2 seem sensible to me, and 3/4 are obviously a good idea. Also
all patches look good to me, so this series is:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (4):
>   ata: ahci_platform: fix ahci_platform_data->suspend method handling
>   ata: move library code from ahci_platform.c to libahci_platform.c
>   ata: add new-style AHCI platform driver for DaVinci DA850 AHCI
>     controller
>   ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI
>     controller
> 
>  drivers/ata/Kconfig            |  23 +-
>  drivers/ata/Makefile           |  10 +-
>  drivers/ata/ahci_da850.c       | 178 ++++++++++++++
>  drivers/ata/ahci_platform.c    | 508 --------------------------------------
>  drivers/ata/ahci_spear1340.c   | 222 +++++++++++++++++
>  drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 967 insertions(+), 515 deletions(-)
>  create mode 100644 drivers/ata/ahci_da850.c
>  create mode 100644 drivers/ata/ahci_spear1340.c
>  create mode 100644 drivers/ata/libahci_platform.c
> 

[PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Hans de Goede]

Hi,

On 03/17/2014 07:31 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patch series adds new-style AHCI platform drivers for DaVinci DA850
> AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
> adding these drivers it also fixes ahci_platform_data->suspend() handling
> (patch #1) and moves library AHCI platform code to its own file (patch #2).
> The new AHCI platform drivers are only compile tested (they are marked as
> experimental because of this) and I would ask somebody with the hardware
> to verify them (thanks!).

Thanks for working on this.

Patches 1/2 seem sensible to me, and 3/4 are obviously a good idea. Also
all patches look good to me, so this series is:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (4):
>   ata: ahci_platform: fix ahci_platform_data->suspend method handling
>   ata: move library code from ahci_platform.c to libahci_platform.c
>   ata: add new-style AHCI platform driver for DaVinci DA850 AHCI
>     controller
>   ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI
>     controller
> 
>  drivers/ata/Kconfig            |  23 +-
>  drivers/ata/Makefile           |  10 +-
>  drivers/ata/ahci_da850.c       | 178 ++++++++++++++
>  drivers/ata/ahci_platform.c    | 508 --------------------------------------
>  drivers/ata/ahci_spear1340.c   | 222 +++++++++++++++++
>  drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 967 insertions(+), 515 deletions(-)
>  create mode 100644 drivers/ata/ahci_da850.c
>  create mode 100644 drivers/ata/ahci_spear1340.c
>  create mode 100644 drivers/ata/libahci_platform.c
> 

Re: [PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[Hans de Goede]

Hi,

On 03/17/2014 07:31 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patch series adds new-style AHCI platform drivers for DaVinci DA850
> AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
> adding these drivers it also fixes ahci_platform_data->suspend() handling
> (patch #1) and moves library AHCI platform code to its own file (patch #2).
> The new AHCI platform drivers are only compile tested (they are marked as
> experimental because of this) and I would ask somebody with the hardware
> to verify them (thanks!).

Thanks for working on this.

Patches 1/2 seem sensible to me, and 3/4 are obviously a good idea. Also
all patches look good to me, so this series is:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (4):
>   ata: ahci_platform: fix ahci_platform_data->suspend method handling
>   ata: move library code from ahci_platform.c to libahci_platform.c
>   ata: add new-style AHCI platform driver for DaVinci DA850 AHCI
>     controller
>   ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI
>     controller
> 
>  drivers/ata/Kconfig            |  23 +-
>  drivers/ata/Makefile           |  10 +-
>  drivers/ata/ahci_da850.c       | 178 ++++++++++++++
>  drivers/ata/ahci_platform.c    | 508 --------------------------------------
>  drivers/ata/ahci_spear1340.c   | 222 +++++++++++++++++
>  drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 967 insertions(+), 515 deletions(-)
>  create mode 100644 drivers/ata/ahci_da850.c
>  create mode 100644 drivers/ata/ahci_spear1340.c
>  create mode 100644 drivers/ata/libahci_platform.c
>