Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Benjamin Federau]

[-- Attachment #1: Type: text/plain, Size: 836 bytes --]

Hi,

currently I'm using the gst-fsl-plugins version 3.0.8 and I saw that in the meantime some network streaming related changes were added in the newer version of the gst-fsl-plugins.

I want to stay on Kernel 3.0.35-4.1.0, but I want to update the gst-fsl-plugins to a newer version. And there are also new versions of libfsl{codec,parser,vpuwrap} and the imx-lib. 

Can someone tell me if it is possible to update the gst-fsl-plugins and libfsl{codec,parser,vpuwrap} without switching to Kernel 3.10.17-1.0.0 ??


Regards
-
Benjamin

-- 
  
M.Sc. Benjamin Federau 
Integration Engineer 
  
basysKom GmbH 
Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany 
benjamin.federau@basyskom.com  | www.basyskom.com 
  
Handelsregister: Darmstadt HRB 9352 
Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler

[-- Attachment #2: Type: text/html, Size: 1086 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Lauren Post]

[-- Attachment #1: Type: text/plain, Size: 1484 bytes --]

The gstreamer plugins should work on the older kernel release.  We do test legacy builds on mx53 and mx28 which use older kernel to verify that they are backward compatible.

If you do use vpu wrapper note that the vpu firmware was also updated in firmware-imx and should be backported.

Lauren

From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Benjamin Federau
Sent: Tuesday, April 29, 2014 10:05 AM
To: meta-freescale@yoctoproject.org
Subject: [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

Hi,

currently I'm using the gst-fsl-plugins version 3.0.8 and I saw that in the meantime some network streaming related changes were added in the newer version of the gst-fsl-plugins.

I want to stay on Kernel 3.0.35-4.1.0, but I want to update the gst-fsl-plugins to a newer version. And there are also new versions of libfsl{codec,parser,vpuwrap} and the imx-lib.

Can someone tell me if it is possible to update the gst-fsl-plugins and libfsl{codec,parser,vpuwrap} without switching to Kernel 3.10.17-1.0.0 ??


Regards
-
Benjamin

--

M.Sc. Benjamin Federau
Integration Engineer

basysKom GmbH
Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany
benjamin.federau@basyskom.com<mailto:benjamin.federau@basyskom.com>  | www.basyskom.com<http://www.basyskom.com>

Handelsregister: Darmstadt HRB 9352
Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler

[-- Attachment #2: Type: text/html, Size: 4597 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Xh Xiao]

[-- Attachment #1: Type: text/plain, Size: 2041 bytes --]

what about imx6D/6Q? any test on them?
I'm considering backporting this to imx6Q 4.1.0 as well. is there any
release-notes/doc talking about the difference? want to make sure it's
worth the effort.

thanks,
xxiao


On Tue, Apr 29, 2014 at 11:15 AM, Lauren Post <Lauren.Post@freescale.com>wrote:

>  The gstreamer plugins should work on the older kernel release.  We do
> test legacy builds on mx53 and mx28 which use older kernel to verify that
> they are backward compatible.
>
>
>
> If you do use vpu wrapper note that the vpu firmware was also updated in
> firmware-imx and should be backported.
>
>
>
> Lauren
>
>
>
> *From:* meta-freescale-bounces@yoctoproject.org [mailto:
> meta-freescale-bounces@yoctoproject.org] *On Behalf Of *Benjamin Federau
> *Sent:* Tuesday, April 29, 2014 10:05 AM
> *To:* meta-freescale@yoctoproject.org
> *Subject:* [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11
> on 3.0.35-4.1.0 Kernel
>
>
>
> Hi,
>
> currently I'm using the gst-fsl-plugins version 3.0.8 and I saw that in
> the meantime some network streaming related changes were added in the newer
> version of the gst-fsl-plugins.
>
> I want to stay on Kernel 3.0.35-4.1.0, but I want to update the
> gst-fsl-plugins to a newer version. And there are also new versions of
> libfsl{codec,parser,vpuwrap} and the imx-lib.
>
> Can someone tell me if it is possible to update the gst-fsl-plugins and
> libfsl{codec,parser,vpuwrap} without switching to Kernel 3.10.17-1.0.0 ??
>
>
> Regards
> -
> Benjamin
>
> --
>
> M.Sc. Benjamin Federau
> Integration Engineer
>
> basysKom GmbH
> Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany
> benjamin.federau@basyskom.com  | www.basyskom.com
>
> Handelsregister: Darmstadt HRB 9352
> Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>

[-- Attachment #2: Type: text/html, Size: 4312 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Benjamin Federau]

[-- Attachment #1: Type: text/plain, Size: 1924 bytes --]

Just for my understanding. If I update to the following versions it should/could work with my 3.0.35-4.1.0 Kernel!?

firmware-imx    3.10.17-1.0.0
imx-lib                 3.10.17-1.0.0
imx-vpu               3.10.17-1.0.0
libfslcodec         3.0.11
libfslparser        3.0.11
libfslvpuwrap   1.0.46
gst-fsl-plugins  3.0.11


-
Benjamin

Lauren Post <Lauren.Post@freescale.com> , 29.04.2014 18:16:
   

The gstreamer plugins should work on the older kernel release.  We do test legacy builds on mx53 and mx28 which use older kernel to verify that they are backward  compatible.   

  

If you do use vpu wrapper note that the vpu firmware was also updated in firmware-imx and should be backported. 

  

Lauren 

    

From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Benjamin Federau
 Sent: Tuesday, April 29, 2014 10:05 AM
 To: meta-freescale@yoctoproject.org
 Subject: [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel   

  

Hi,
 
 currently I'm using the gst-fsl-plugins version 3.0.8 and I saw that in the meantime some network streaming related changes were added in the newer version of the gst-fsl-plugins.
 
 I want to stay on Kernel 3.0.35-4.1.0, but I want to update the gst-fsl-plugins to a newer version. And there are also new versions of libfsl{codec,parser,vpuwrap} and the imx-lib. 
 
 Can someone tell me if it is possible to update the gst-fsl-plugins and libfsl{codec,parser,vpuwrap} without switching to Kernel 3.10.17-1.0.0 ??
 
 
 Regards
 -
 Benjamin
 
 -- 
   
 M.Sc. Benjamin Federau 
 Integration Engineer 
   
 basysKom GmbH 
 Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany 
 benjamin.federau@basyskom.com  | www.basyskom.com 
   
 Handelsregister: Darmstadt HRB 9352 
 Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler  

[-- Attachment #2: Type: text/html, Size: 4924 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Lauren Post]

[-- Attachment #1: Type: text/plain, Size: 2526 bytes --]

The only concern I have is imx-lib on 3.0.35. There were new pxp headers added in 3.10 that might cause a build break in 3.0.35 for imx-test or imx-lib pxp component.

Lauren

From: Benjamin Federau [mailto:benjamin.federau@basyskom.com]
Sent: Wednesday, April 30, 2014 4:51 AM
To: Post Lauren-RAA013
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

Just for my understanding. If I update to the following versions it should/could work with my 3.0.35-4.1.0 Kernel!?

firmware-imx    3.10.17-1.0.0
imx-lib                 3.10.17-1.0.0
imx-vpu               3.10.17-1.0.0
libfslcodec         3.0.11
libfslparser        3.0.11
libfslvpuwrap   1.0.46
gst-fsl-plugins  3.0.11


-
Benjamin
Lauren Post <Lauren.Post@freescale.com<mailto:Lauren.Post@freescale.com>> , 29.04.2014 18:16:

The gstreamer plugins should work on the older kernel release.  We do test legacy builds on mx53 and mx28 which use older kernel to verify that they are backward compatible.



If you do use vpu wrapper note that the vpu firmware was also updated in firmware-imx and should be backported.



Lauren



From: meta-freescale-bounces@yoctoproject.org<mailto:meta-freescale-bounces@yoctoproject.org> [mailto:meta-freescale-bounces@yoctoproject.org<mailto:meta-freescale-bounces@yoctoproject.org>] On Behalf Of Benjamin Federau
Sent: Tuesday, April 29, 2014 10:05 AM
To: meta-freescale@yoctoproject.org<mailto:meta-freescale@yoctoproject.org>
Subject: [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel



Hi,

currently I'm using the gst-fsl-plugins version 3.0.8 and I saw that in the meantime some network streaming related changes were added in the newer version of the gst-fsl-plugins.

I want to stay on Kernel 3.0.35-4.1.0, but I want to update the gst-fsl-plugins to a newer version. And there are also new versions of libfsl{codec,parser,vpuwrap} and the imx-lib.

Can someone tell me if it is possible to update the gst-fsl-plugins and libfsl{codec,parser,vpuwrap} without switching to Kernel 3.10.17-1.0.0 ??


Regards
-
Benjamin

--

M.Sc. Benjamin Federau
Integration Engineer

basysKom GmbH
Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany
benjamin.federau@basyskom.com<mailto:benjamin.federau@basyskom.com>  | www.basyskom.com<http://www.basyskom.com>

Handelsregister: Darmstadt HRB 9352
Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler

[-- Attachment #2: Type: text/html, Size: 8891 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Benjamin Federau]

[-- Attachment #1: Type: text/plain, Size: 3062 bytes --]

Your concern is correct. I tried to build the imx-lib against the 3.0.35-4.1.0 Kernel and I get the 

pxp_lib.h:19:30: fatal error: linux/pxp_device.h: No such file or directory

The pxp_device.h header file is present in the 3.10.17 Kernel, but not in the 3.0.35 Kernel and there are some changes regarding PXP in the Freescale 3.10.17 Kernel tree.

Is there a workaround? Maybe applying the PXP changes in the 3.10.17 Kernel to the 2.0.35?  Or do I have to switch to Kernel 3.10.17 in the end?


-
Benjamin


Lauren Post <Lauren.Post@freescale.com> , 30.04.2014 23:11:
   

The only concern I have is imx-lib on 3.0.35. There were new pxp headers added in 3.10 that might cause a build break in 3.0.35 for imx-test or imx-lib pxp  component. 

  

Lauren 

    

From: Benjamin Federau [mailto:benjamin.federau@basyskom.com] 
 Sent: Wednesday, April 30, 2014 4:51 AM
 To: Post Lauren-RAA013
 Cc: meta-freescale@yoctoproject.org
 Subject: Re: [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel   

  

Just for my understanding. If I update to the following versions it should/could work with my 3.0.35-4.1.0 Kernel!?
 
 firmware-imx    3.10.17-1.0.0
 imx-lib                 3.10.17-1.0.0
 imx-vpu               3.10.17-1.0.0
 libfslcodec         3.0.11
 libfslparser        3.0.11
 libfslvpuwrap   1.0.46
 gst-fsl-plugins  3.0.11
 
 
 -
 Benjamin  

Lauren Post <Lauren.Post@freescale.com> , 29.04.2014 18:16:   

The gstreamer plugins should work on the older kernel release.  We do test legacy builds on mx53 and mx28 which use older kernel to verify that they are  backward compatible.   

  

If you do use vpu wrapper note that the vpu firmware was also updated in firmware-imx and should be backported. 

  

Lauren 

    

From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Benjamin Federau
 Sent: Tuesday, April 29, 2014 10:05 AM
 To: meta-freescale@yoctoproject.org
 Subject: [meta-freescale] Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel   

  

Hi,
 
 currently I'm using the gst-fsl-plugins version 3.0.8 and I saw that in the meantime some network streaming related changes were added in the newer version of the gst-fsl-plugins.
 
 I want to stay on Kernel 3.0.35-4.1.0, but I want to update the gst-fsl-plugins to a newer version. And there are also new versions of libfsl{codec,parser,vpuwrap} and the imx-lib. 
 
 Can someone tell me if it is possible to update the gst-fsl-plugins and libfsl{codec,parser,vpuwrap} without switching to Kernel 3.10.17-1.0.0 ??
 
 
 Regards
 -
 Benjamin
 
 -- 
   
 M.Sc. Benjamin Federau 
 Integration Engineer 
   
 basysKom GmbH 
 Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany 
 benjamin.federau@basyskom.com  | www.basyskom.com 
   
 Handelsregister: Darmstadt HRB 9352 
 Geschaeftsfuehrung: Dr.-Ing. Eva Brucherseifer, Heike Ziegler     

[-- Attachment #2: Type: text/html, Size: 9177 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Otavio Salvador]

On Tue, May 6, 2014 at 11:45 AM, Benjamin Federau
<benjamin.federau@basyskom.com> wrote:
> Your concern is correct. I tried to build the imx-lib against the
> 3.0.35-4.1.0 Kernel and I get the
>
> pxp_lib.h:19:30: fatal error: linux/pxp_device.h: No such file or directory
>
> The pxp_device.h header file is present in the 3.10.17 Kernel, but not in
> the 3.0.35 Kernel and there are some changes regarding PXP in the Freescale
> 3.10.17 Kernel tree.
>
> Is there a workaround? Maybe applying the PXP changes in the 3.10.17 Kernel
> to the 2.0.35?  Or do I have to switch to Kernel 3.10.17 in the end?

You could compare imx-lib and see the changes you need. However bear
on mind 3.0.35 support is removed from meta-fsl-arm so the right move
is to go to 3.10.17.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Xh Xiao]

[-- Attachment #1: Type: text/plain, Size: 1440 bytes --]

Same issue here, the new imx-lib can't be built against 3.0.35 kernel. What
is PXP driver for? can we just disable it from imx-lib?

xxiao


On Tue, May 6, 2014 at 2:39 PM, Otavio Salvador <otavio@ossystems.com.br>wrote:

> On Tue, May 6, 2014 at 11:45 AM, Benjamin Federau
> <benjamin.federau@basyskom.com> wrote:
> > Your concern is correct. I tried to build the imx-lib against the
> > 3.0.35-4.1.0 Kernel and I get the
> >
> > pxp_lib.h:19:30: fatal error: linux/pxp_device.h: No such file or
> directory
> >
> > The pxp_device.h header file is present in the 3.10.17 Kernel, but not in
> > the 3.0.35 Kernel and there are some changes regarding PXP in the
> Freescale
> > 3.10.17 Kernel tree.
> >
> > Is there a workaround? Maybe applying the PXP changes in the 3.10.17
> Kernel
> > to the 2.0.35?  Or do I have to switch to Kernel 3.10.17 in the end?
>
> You could compare imx-lib and see the changes you need. However bear
> on mind 3.0.35 support is removed from meta-fsl-arm so the right move
> is to go to 3.10.17.
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>

[-- Attachment #2: Type: text/html, Size: 2438 bytes --]

Re: Update gst-fsl-plugins from 3.0.8 to 3.0.11 on 3.0.35-4.1.0 Kernel

[Daiane Angolini]

On Tue, May 6, 2014 at 4:59 PM, Xh Xiao <xxiao8@fosiao.com> wrote:
> Same issue here, the new imx-lib can't be built against 3.0.35 kernel. What
> is PXP driver for? can we just disable it from imx-lib?

Please, next time do not top-post [1]. I know asking it is annoying,
and I´m still learning exactly how to master the quoting reply.

PXP driver is using, for imx6 only in imx6slevk (for 3rd party boards,
I´m not sure how/what)

So, if you´re using imx6Q, you have IPU not PXP.



>> >
>> > Is there a workaround? Maybe applying the PXP changes in the 3.10.17
>> > Kernel
>> > to the 2.0.35?  Or do I have to switch to Kernel 3.10.17 in the end?

I would only configure imx-lib to not build pxp in case it´s not a
imx6sl board/machine.

Lauren, do you know if there is a way to add a PLATFORM_mx6sl =
"IMX6SL" option in imx-lib recipe, or even some --disable-pxp?



Daiane

[1] https://wiki.yoctoproject.org/wiki/Community_Guidelines
Do not top post: Top posting is replying to a message on "top" of the
quoted text of the previous correspondence. This is highly unwanted in
mailing lists because it increases the size of the daily digests to be
sent out & is highly confusing and incoherent. By default, most email
clients top post. Please, remove the irrelevant part of the previous
communication(in case of more than a single correspondence) and use
bottom, interleaved posting.