[RFC/PATCH 0/7] Renesas R-Car DU OF support

[RFC/PATCH 0/7] Renesas R-Car DU OF support

[Laurent Pinchart]

Hello,

This patch set adds OF support to the DU driver (1/7) and enables the DU on
the Lager (2/7 to 4/7) and Koelsch (5/7 to 7/7) platforms.

Due to the lack of standard bindings for video devices, the approach taken
here is minimalistic and aims at enabling the DU on multiplatform kernels until
more complete DT bindings get developed. The DU DT node contains core resources
only (memory, IRQ and clocks), and output configuration is passed in platform
data using OF_DEV_AUXDATA.

Laurent Pinchart (7):
  drm/rcar-du: Add OF support
  ARM: shmobile: r8a7790: Add DU node to device tree
  ARM: shmobile: lager-reference: Add DU platform data
  ARM: shmobile: lager: Enable DU device in DT
  ARM: shmobile: r8a7791: Add DU node to device tree
  ARM: shmobile: koelsch-reference: Add DU platform data
  ARM: shmobile: koelsch: Enable DU device in DT

 .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
 arch/arm/boot/dts/r8a7790-lager.dts                |  11 ++
 arch/arm/boot/dts/r8a7790.dtsi                     |  19 +++
 arch/arm/boot/dts/r8a7791-koelsch.dts              |  11 ++
 arch/arm/boot/dts/r8a7791.dtsi                     |  15 ++
 arch/arm/mach-shmobile/board-koelsch-reference.c   |  38 ++++-
 arch/arm/mach-shmobile/board-lager-reference.c     |  41 +++++-
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
 8 files changed, 271 insertions(+), 74 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

-- 
Regards,

Laurent Pinchart

[RFC/PATCH 0/7] Renesas R-Car DU OF support

[Laurent Pinchart]

Hello,

This patch set adds OF support to the DU driver (1/7) and enables the DU on
the Lager (2/7 to 4/7) and Koelsch (5/7 to 7/7) platforms.

Due to the lack of standard bindings for video devices, the approach taken
here is minimalistic and aims at enabling the DU on multiplatform kernels until
more complete DT bindings get developed. The DU DT node contains core resources
only (memory, IRQ and clocks), and output configuration is passed in platform
data using OF_DEV_AUXDATA.

Laurent Pinchart (7):
  drm/rcar-du: Add OF support
  ARM: shmobile: r8a7790: Add DU node to device tree
  ARM: shmobile: lager-reference: Add DU platform data
  ARM: shmobile: lager: Enable DU device in DT
  ARM: shmobile: r8a7791: Add DU node to device tree
  ARM: shmobile: koelsch-reference: Add DU platform data
  ARM: shmobile: koelsch: Enable DU device in DT

 .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
 arch/arm/boot/dts/r8a7790-lager.dts                |  11 ++
 arch/arm/boot/dts/r8a7790.dtsi                     |  19 +++
 arch/arm/boot/dts/r8a7791-koelsch.dts              |  11 ++
 arch/arm/boot/dts/r8a7791.dtsi                     |  15 ++
 arch/arm/mach-shmobile/board-koelsch-reference.c   |  38 ++++-
 arch/arm/mach-shmobile/board-lager-reference.c     |  41 +++++-
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
 8 files changed, 271 insertions(+), 74 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

-- 
Regards,

Laurent Pinchart

[RFC/PATCH 1/7] drm/rcar-du: Add OF support

[Laurent Pinchart]

Add DT bindings for the R-Car DU with support for core resources
(memory, IRQ and clocks). Output configuration must still be passed
through platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
 2 files changed, 138 insertions(+), 72 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
new file mode 100644
index 0000000..6bd947c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -0,0 +1,49 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7790 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+	};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 5536811..86ba5c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
@@ -30,6 +31,90 @@
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rcar_du_device_info rcar_du_r8a7779_info = {
+	.features = 0,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7779 has two RGB outputs and one (currently unsupported)
+		 * TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+	},
+	.num_lvds = 0,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7790_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.num_crtcs = 3,
+	.routes = {
+		/* R8A7790 has one RGB output, two LVDS outputs and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(2) | BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 2,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7791_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7791 has one RGB output, one LVDS output and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 1,
+};
+
+static const struct platform_device_id rcar_du_id_table[] = {
+	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
+	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
+	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
+
+static const struct of_device_id rcar_du_of_table[] = {
+	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
+	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
+	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_du_of_table);
+
+/* -----------------------------------------------------------------------------
  * DRM operations
  */
 
@@ -53,6 +138,7 @@ static int rcar_du_unload(struct drm_device *dev)
 static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 {
 	struct platform_device *pdev = dev->platformdev;
+	struct device_node *np = pdev->dev.of_node;
 	struct rcar_du_platform_data *pdata = pdev->dev.platform_data;
 	struct rcar_du_device *rcdu;
 	struct resource *mem;
@@ -71,7 +157,8 @@ static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 
 	rcdu->dev = &pdev->dev;
 	rcdu->pdata = pdata;
-	rcdu->info = (struct rcar_du_device_info *)pdev->id_entry->driver_data;
+	rcdu->info = np ? of_match_device(rcar_du_of_table, rcdu->dev)->data
+		   : (void *)platform_get_device_id(pdev)->driver_data;
 	rcdu->ddev = dev;
 	dev->dev_private = rcdu;
 
@@ -229,77 +316,6 @@ static int rcar_du_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct rcar_du_device_info rcar_du_r8a7779_info = {
-	.features = 0,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7779 has two RGB outputs and one (currently unsupported)
-		 * TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_DPAD1] = {
-			.possible_crtcs = BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-	},
-	.num_lvds = 0,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7790_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
-	.num_crtcs = 3,
-	.routes = {
-		/* R8A7790 has one RGB output, two LVDS outputs and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-		[RCAR_DU_OUTPUT_LVDS1] = {
-			.possible_crtcs = BIT(2) | BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 2,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7791_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7791 has one RGB output, one LVDS output and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 1,
-};
-
-static const struct platform_device_id rcar_du_id_table[] = {
-	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
-	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
-	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
-
 static struct platform_driver rcar_du_platform_driver = {
 	.probe		= rcar_du_probe,
 	.remove		= rcar_du_remove,
@@ -307,6 +323,7 @@ static struct platform_driver rcar_du_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "rcar-du",
 		.pm	= &rcar_du_pm_ops,
+		.of_match_table = rcar_du_of_table,
 	},
 	.id_table	= rcar_du_id_table,
 };
-- 
1.8.3.2

[RFC/PATCH 1/7] drm/rcar-du: Add OF support

[Laurent Pinchart]

Add DT bindings for the R-Car DU with support for core resources
(memory, IRQ and clocks). Output configuration must still be passed
through platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
 2 files changed, 138 insertions(+), 72 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
new file mode 100644
index 0000000..6bd947c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -0,0 +1,49 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7790 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+	};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 5536811..86ba5c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
@@ -30,6 +31,90 @@
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rcar_du_device_info rcar_du_r8a7779_info = {
+	.features = 0,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7779 has two RGB outputs and one (currently unsupported)
+		 * TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+	},
+	.num_lvds = 0,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7790_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.num_crtcs = 3,
+	.routes = {
+		/* R8A7790 has one RGB output, two LVDS outputs and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(2) | BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 2,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7791_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7791 has one RGB output, one LVDS output and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 1,
+};
+
+static const struct platform_device_id rcar_du_id_table[] = {
+	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
+	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
+	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
+
+static const struct of_device_id rcar_du_of_table[] = {
+	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
+	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
+	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_du_of_table);
+
+/* -----------------------------------------------------------------------------
  * DRM operations
  */
 
@@ -53,6 +138,7 @@ static int rcar_du_unload(struct drm_device *dev)
 static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 {
 	struct platform_device *pdev = dev->platformdev;
+	struct device_node *np = pdev->dev.of_node;
 	struct rcar_du_platform_data *pdata = pdev->dev.platform_data;
 	struct rcar_du_device *rcdu;
 	struct resource *mem;
@@ -71,7 +157,8 @@ static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 
 	rcdu->dev = &pdev->dev;
 	rcdu->pdata = pdata;
-	rcdu->info = (struct rcar_du_device_info *)pdev->id_entry->driver_data;
+	rcdu->info = np ? of_match_device(rcar_du_of_table, rcdu->dev)->data
+		   : (void *)platform_get_device_id(pdev)->driver_data;
 	rcdu->ddev = dev;
 	dev->dev_private = rcdu;
 
@@ -229,77 +316,6 @@ static int rcar_du_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct rcar_du_device_info rcar_du_r8a7779_info = {
-	.features = 0,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7779 has two RGB outputs and one (currently unsupported)
-		 * TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_DPAD1] = {
-			.possible_crtcs = BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-	},
-	.num_lvds = 0,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7790_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
-	.num_crtcs = 3,
-	.routes = {
-		/* R8A7790 has one RGB output, two LVDS outputs and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-		[RCAR_DU_OUTPUT_LVDS1] = {
-			.possible_crtcs = BIT(2) | BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 2,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7791_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7791 has one RGB output, one LVDS output and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 1,
-};
-
-static const struct platform_device_id rcar_du_id_table[] = {
-	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
-	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
-	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
-
 static struct platform_driver rcar_du_platform_driver = {
 	.probe		= rcar_du_probe,
 	.remove		= rcar_du_remove,
@@ -307,6 +323,7 @@ static struct platform_driver rcar_du_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "rcar-du",
 		.pm	= &rcar_du_pm_ops,
+		.of_match_table = rcar_du_of_table,
 	},
 	.id_table	= rcar_du_id_table,
 };
-- 
1.8.3.2

[RFC/PATCH 2/7] ARM: shmobile: r8a7790: Add DU node to device tree

[Laurent Pinchart]

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index f2f5394..38632a5 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -418,6 +418,25 @@
 		status = "disabled";
 	};
 
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.3.2

[RFC/PATCH 2/7] ARM: shmobile: r8a7790: Add DU node to device tree

[Laurent Pinchart]

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index f2f5394..38632a5 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -418,6 +418,25 @@
 		status = "disabled";
 	};
 
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.3.2

[RFC/PATCH 3/7] ARM: shmobile: lager-reference: Add DU platform data

[Laurent Pinchart]

The DU device is instantiated through the device tree, pass the DU
platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-lager-reference.c | 41 +++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index dc8d76b..0294836 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -22,11 +22,49 @@
 #include <linux/clkdev.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct of_dev_auxdata lager_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("renesas,du-r8a7790", 0xfeb00000, NULL, &lager_du_pdata),
+	{}
+};
+
 static void __init lager_add_standard_devices(void)
 {
 #ifdef CONFIG_COMMON_CLK
@@ -60,7 +98,8 @@ static void __init lager_add_standard_devices(void)
 #endif
 
 	r8a7790_add_dt_devices();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     lager_auxdata_lookup, NULL);
 }
 
 static const char *lager_boards_compat_dt[] __initdata = {
-- 
1.8.3.2

[RFC/PATCH 3/7] ARM: shmobile: lager-reference: Add DU platform data

[Laurent Pinchart]

The DU device is instantiated through the device tree, pass the DU
platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-lager-reference.c | 41 +++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index dc8d76b..0294836 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -22,11 +22,49 @@
 #include <linux/clkdev.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct of_dev_auxdata lager_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("renesas,du-r8a7790", 0xfeb00000, NULL, &lager_du_pdata),
+	{}
+};
+
 static void __init lager_add_standard_devices(void)
 {
 #ifdef CONFIG_COMMON_CLK
@@ -60,7 +98,8 @@ static void __init lager_add_standard_devices(void)
 #endif
 
 	r8a7790_add_dt_devices();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     lager_auxdata_lookup, NULL);
 }
 
 static const char *lager_boards_compat_dt[] __initdata = {
-- 
1.8.3.2

[RFC/PATCH 4/7] ARM: shmobile: lager: Enable DU device in DT

[Laurent Pinchart]

Enable the DU device and configure the related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 1081c5e..27bf361 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -58,6 +58,12 @@
 	};
 };
 
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <20000000>;
 };
@@ -66,6 +72,11 @@
 	pinctrl-0 = <&scif0_pins &scif1_pins>;
 	pinctrl-names = "default";
 
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data";
 		renesas,function = "scif0";
-- 
1.8.3.2

[RFC/PATCH 4/7] ARM: shmobile: lager: Enable DU device in DT

[Laurent Pinchart]

Enable the DU device and configure the related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 1081c5e..27bf361 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -58,6 +58,12 @@
 	};
 };
 
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <20000000>;
 };
@@ -66,6 +72,11 @@
 	pinctrl-0 = <&scif0_pins &scif1_pins>;
 	pinctrl-names = "default";
 
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data";
 		renesas,function = "scif0";
-- 
1.8.3.2

[RFC/PATCH 5/7] ARM: shmobile: r8a7791: Add DU node to device tree

[Laurent Pinchart]

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index d5cc362..a53b0d7 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -384,6 +384,21 @@
 		status = "disabled";
 	};
 
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7791";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		         <&mstp7_clks R8A7791_CLK_DU1>,
+		         <&mstp7_clks R8A7791_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.3.2

[RFC/PATCH 5/7] ARM: shmobile: r8a7791: Add DU node to device tree

[Laurent Pinchart]

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index d5cc362..a53b0d7 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -384,6 +384,21 @@
 		status = "disabled";
 	};
 
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7791";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		         <&mstp7_clks R8A7791_CLK_DU1>,
+		         <&mstp7_clks R8A7791_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.3.2

[RFC/PATCH 6/7] ARM: shmobile: koelsch-reference: Add DU platform data

[Laurent Pinchart]

The DU device is instantiated through the device tree, pass the DU
platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-koelsch-reference.c | 38 +++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index feb8d97..f9831cd 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -23,11 +23,46 @@
 #include <linux/clkdev.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7791.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS0,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data koelsch_du_pdata = {
+	.encoders = koelsch_du_encoders,
+	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct of_dev_auxdata koelsch_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("renesas,du-r8a7791", 0xfeb00000, NULL, &koelsch_du_pdata),
+	{}
+};
+
 static void __init koelsch_add_standard_devices(void)
 {
 #ifdef CONFIG_COMMON_CLK
@@ -60,7 +95,8 @@ static void __init koelsch_add_standard_devices(void)
 	r8a7791_clock_init();
 #endif
 	r8a7791_add_dt_devices();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     koelsch_auxdata_lookup, NULL);
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {
-- 
1.8.3.2

[RFC/PATCH 6/7] ARM: shmobile: koelsch-reference: Add DU platform data

[Laurent Pinchart]

The DU device is instantiated through the device tree, pass the DU
platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-koelsch-reference.c | 38 +++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index feb8d97..f9831cd 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -23,11 +23,46 @@
 #include <linux/clkdev.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7791.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS0,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data koelsch_du_pdata = {
+	.encoders = koelsch_du_encoders,
+	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct of_dev_auxdata koelsch_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("renesas,du-r8a7791", 0xfeb00000, NULL, &koelsch_du_pdata),
+	{}
+};
+
 static void __init koelsch_add_standard_devices(void)
 {
 #ifdef CONFIG_COMMON_CLK
@@ -60,7 +95,8 @@ static void __init koelsch_add_standard_devices(void)
 	r8a7791_clock_init();
 #endif
 	r8a7791_add_dt_devices();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     koelsch_auxdata_lookup, NULL);
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {
-- 
1.8.3.2

[RFC/PATCH 7/7] ARM: shmobile: koelsch: Enable DU device in DT

[Laurent Pinchart]

Enable the DU device and configure the related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 74f0985..678c54e 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -104,6 +104,12 @@
 	};
 };
 
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <20000000>;
 };
@@ -112,6 +118,11 @@
 	pinctrl-0 = <&scif0_pins &scif1_pins>;
 	pinctrl-names = "default";
 
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
-- 
1.8.3.2

[RFC/PATCH 7/7] ARM: shmobile: koelsch: Enable DU device in DT

[Laurent Pinchart]

Enable the DU device and configure the related pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 74f0985..678c54e 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -104,6 +104,12 @@
 	};
 };
 
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <20000000>;
 };
@@ -112,6 +118,11 @@
 	pinctrl-0 = <&scif0_pins &scif1_pins>;
 	pinctrl-names = "default";
 
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
-- 
1.8.3.2

[RFC/PATCH 1/7 RESEND] drm/rcar-du: Add OF support

[Laurent Pinchart]

Add DT bindings for the R-Car DU with support for core resources
(memory, IRQ and clocks). Output configuration must still be passed
through platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
 2 files changed, 138 insertions(+), 72 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

With the devicetree mailing list CC'ed this time.

diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
new file mode 100644
index 0000000..6bd947c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -0,0 +1,49 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7790 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+	};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 5536811..86ba5c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
@@ -30,6 +31,90 @@
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rcar_du_device_info rcar_du_r8a7779_info = {
+	.features = 0,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7779 has two RGB outputs and one (currently unsupported)
+		 * TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+	},
+	.num_lvds = 0,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7790_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.num_crtcs = 3,
+	.routes = {
+		/* R8A7790 has one RGB output, two LVDS outputs and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(2) | BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 2,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7791_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7791 has one RGB output, one LVDS output and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 1,
+};
+
+static const struct platform_device_id rcar_du_id_table[] = {
+	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
+	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
+	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
+
+static const struct of_device_id rcar_du_of_table[] = {
+	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
+	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
+	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_du_of_table);
+
+/* -----------------------------------------------------------------------------
  * DRM operations
  */
 
@@ -53,6 +138,7 @@ static int rcar_du_unload(struct drm_device *dev)
 static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 {
 	struct platform_device *pdev = dev->platformdev;
+	struct device_node *np = pdev->dev.of_node;
 	struct rcar_du_platform_data *pdata = pdev->dev.platform_data;
 	struct rcar_du_device *rcdu;
 	struct resource *mem;
@@ -71,7 +157,8 @@ static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 
 	rcdu->dev = &pdev->dev;
 	rcdu->pdata = pdata;
-	rcdu->info = (struct rcar_du_device_info *)pdev->id_entry->driver_data;
+	rcdu->info = np ? of_match_device(rcar_du_of_table, rcdu->dev)->data
+		   : (void *)platform_get_device_id(pdev)->driver_data;
 	rcdu->ddev = dev;
 	dev->dev_private = rcdu;
 
@@ -229,77 +316,6 @@ static int rcar_du_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct rcar_du_device_info rcar_du_r8a7779_info = {
-	.features = 0,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7779 has two RGB outputs and one (currently unsupported)
-		 * TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_DPAD1] = {
-			.possible_crtcs = BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-	},
-	.num_lvds = 0,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7790_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
-	.num_crtcs = 3,
-	.routes = {
-		/* R8A7790 has one RGB output, two LVDS outputs and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-		[RCAR_DU_OUTPUT_LVDS1] = {
-			.possible_crtcs = BIT(2) | BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 2,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7791_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7791 has one RGB output, one LVDS output and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 1,
-};
-
-static const struct platform_device_id rcar_du_id_table[] = {
-	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
-	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
-	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
-
 static struct platform_driver rcar_du_platform_driver = {
 	.probe		= rcar_du_probe,
 	.remove		= rcar_du_remove,
@@ -307,6 +323,7 @@ static struct platform_driver rcar_du_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "rcar-du",
 		.pm	= &rcar_du_pm_ops,
+		.of_match_table = rcar_du_of_table,
 	},
 	.id_table	= rcar_du_id_table,
 };
-- 
1.8.3.2

[RFC/PATCH 1/7 RESEND] drm/rcar-du: Add OF support

[Laurent Pinchart]

Add DT bindings for the R-Car DU with support for core resources
(memory, IRQ and clocks). Output configuration must still be passed
through platform data using OF_DEV_AUXDATA.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
 2 files changed, 138 insertions(+), 72 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

With the devicetree mailing list CC'ed this time.

diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
new file mode 100644
index 0000000..6bd947c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -0,0 +1,49 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7790 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+	};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 5536811..86ba5c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
@@ -30,6 +31,90 @@
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rcar_du_device_info rcar_du_r8a7779_info = {
+	.features = 0,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7779 has two RGB outputs and one (currently unsupported)
+		 * TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+	},
+	.num_lvds = 0,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7790_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.num_crtcs = 3,
+	.routes = {
+		/* R8A7790 has one RGB output, two LVDS outputs and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(2) | BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 2,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7791_info = {
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.num_crtcs = 2,
+	.routes = {
+		/* R8A7791 has one RGB output, one LVDS output and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(1),
+			.encoder_type = DRM_MODE_ENCODER_NONE,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.encoder_type = DRM_MODE_ENCODER_LVDS,
+		},
+	},
+	.num_lvds = 1,
+};
+
+static const struct platform_device_id rcar_du_id_table[] = {
+	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
+	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
+	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
+
+static const struct of_device_id rcar_du_of_table[] = {
+	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
+	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
+	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_du_of_table);
+
+/* -----------------------------------------------------------------------------
  * DRM operations
  */
 
@@ -53,6 +138,7 @@ static int rcar_du_unload(struct drm_device *dev)
 static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 {
 	struct platform_device *pdev = dev->platformdev;
+	struct device_node *np = pdev->dev.of_node;
 	struct rcar_du_platform_data *pdata = pdev->dev.platform_data;
 	struct rcar_du_device *rcdu;
 	struct resource *mem;
@@ -71,7 +157,8 @@ static int rcar_du_load(struct drm_device *dev, unsigned long flags)
 
 	rcdu->dev = &pdev->dev;
 	rcdu->pdata = pdata;
-	rcdu->info = (struct rcar_du_device_info *)pdev->id_entry->driver_data;
+	rcdu->info = np ? of_match_device(rcar_du_of_table, rcdu->dev)->data
+		   : (void *)platform_get_device_id(pdev)->driver_data;
 	rcdu->ddev = dev;
 	dev->dev_private = rcdu;
 
@@ -229,77 +316,6 @@ static int rcar_du_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct rcar_du_device_info rcar_du_r8a7779_info = {
-	.features = 0,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7779 has two RGB outputs and one (currently unsupported)
-		 * TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_DPAD1] = {
-			.possible_crtcs = BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-	},
-	.num_lvds = 0,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7790_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
-	.num_crtcs = 3,
-	.routes = {
-		/* R8A7790 has one RGB output, two LVDS outputs and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-		[RCAR_DU_OUTPUT_LVDS1] = {
-			.possible_crtcs = BIT(2) | BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 2,
-};
-
-static const struct rcar_du_device_info rcar_du_r8a7791_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
-	.num_crtcs = 2,
-	.routes = {
-		/* R8A7791 has one RGB output, one LVDS output and one
-		 * (currently unsupported) TCON output.
-		 */
-		[RCAR_DU_OUTPUT_DPAD0] = {
-			.possible_crtcs = BIT(1),
-			.encoder_type = DRM_MODE_ENCODER_NONE,
-		},
-		[RCAR_DU_OUTPUT_LVDS0] = {
-			.possible_crtcs = BIT(0),
-			.encoder_type = DRM_MODE_ENCODER_LVDS,
-		},
-	},
-	.num_lvds = 1,
-};
-
-static const struct platform_device_id rcar_du_id_table[] = {
-	{ "rcar-du-r8a7779", (kernel_ulong_t)&rcar_du_r8a7779_info },
-	{ "rcar-du-r8a7790", (kernel_ulong_t)&rcar_du_r8a7790_info },
-	{ "rcar-du-r8a7791", (kernel_ulong_t)&rcar_du_r8a7791_info },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(platform, rcar_du_id_table);
-
 static struct platform_driver rcar_du_platform_driver = {
 	.probe		= rcar_du_probe,
 	.remove		= rcar_du_remove,
@@ -307,6 +323,7 @@ static struct platform_driver rcar_du_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "rcar-du",
 		.pm	= &rcar_du_pm_ops,
+		.of_match_table = rcar_du_of_table,
 	},
 	.id_table	= rcar_du_id_table,
 };
-- 
1.8.3.2

Re: [RFC/PATCH 1/7] drm/rcar-du: Add OF support

[Magnus Damm]

On Wed, Jan 22, 2014 at 12:32 AM, Laurent Pinchart
<laurent.pinchart+renesas@ideasonboard.com> wrote:
> Add DT bindings for the R-Car DU with support for core resources
> (memory, IRQ and clocks). Output configuration must still be passed
> through platform data using OF_DEV_AUXDATA.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>  .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
>  2 files changed, 138 insertions(+), 72 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

Hi Laurent,

Thanks for your patches. I have some minor comments related to r8a7790
vs r8a7791, please see below.

> diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
> new file mode 100644
> index 0000000..6bd947c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/renesas,du.txt
> @@ -0,0 +1,49 @@
> +* Renesas R-Car Display Unit (DU)
> +
> +Required Properties:
> +
> +  - compatible: must be one of the following.
> +    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> +    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> +    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU

I suppose the last line above should be "renesas,du-r8a7791", right?

> +  - reg: A list of base address and length of each memory resource, one for
> +    each entry in the reg-names property.
> +  - reg-names: Name of the memory resources. The DU requires one memory
> +    resource for the DU core (named "du") and one memory resource for each
> +    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
> +    index).
> +
> +  - interrupt-parent: phandle of the parent interrupt controller.
> +  - interrupts: Interrupt specifiers for the DU interrupts.
> +
> +  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
> +    the clock-names property.
> +  - clock-names: Name of the clocks. This property is model-dependent.
> +    - R8A7779 uses a single functional clock. The clock doesn't need to be
> +      named.
> +    - R8A7790 and R8A7790 use one functional clock per channel and one clock
> +      per LVDS encoder. The functional clocks must be named "du.x" with "x"
> +      being the channel numerical index. The LVDS clocks must be named
> +      "lvds.x" with "x" being the LVDS encoder numerical index.

"R8A7790 and R8A7791"...?

Thanks,

/ magnus

Re: [RFC/PATCH 1/7] drm/rcar-du: Add OF support

[Magnus Damm]

On Wed, Jan 22, 2014 at 12:32 AM, Laurent Pinchart
<laurent.pinchart+renesas@ideasonboard.com> wrote:
> Add DT bindings for the R-Car DU with support for core resources
> (memory, IRQ and clocks). Output configuration must still be passed
> through platform data using OF_DEV_AUXDATA.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>  .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 ++++++++++++---------
>  2 files changed, 138 insertions(+), 72 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt

Hi Laurent,

Thanks for your patches. I have some minor comments related to r8a7790
vs r8a7791, please see below.

> diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt
> new file mode 100644
> index 0000000..6bd947c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/renesas,du.txt
> @@ -0,0 +1,49 @@
> +* Renesas R-Car Display Unit (DU)
> +
> +Required Properties:
> +
> +  - compatible: must be one of the following.
> +    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> +    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> +    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU

I suppose the last line above should be "renesas,du-r8a7791", right?

> +  - reg: A list of base address and length of each memory resource, one for
> +    each entry in the reg-names property.
> +  - reg-names: Name of the memory resources. The DU requires one memory
> +    resource for the DU core (named "du") and one memory resource for each
> +    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
> +    index).
> +
> +  - interrupt-parent: phandle of the parent interrupt controller.
> +  - interrupts: Interrupt specifiers for the DU interrupts.
> +
> +  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
> +    the clock-names property.
> +  - clock-names: Name of the clocks. This property is model-dependent.
> +    - R8A7779 uses a single functional clock. The clock doesn't need to be
> +      named.
> +    - R8A7790 and R8A7790 use one functional clock per channel and one clock
> +      per LVDS encoder. The functional clocks must be named "du.x" with "x"
> +      being the channel numerical index. The LVDS clocks must be named
> +      "lvds.x" with "x" being the LVDS encoder numerical index.

"R8A7790 and R8A7791"...?

Thanks,

/ magnus

Re: [RFC/PATCH 1/7] drm/rcar-du: Add OF support

[Laurent Pinchart]

Hi Magnus,

On Thursday 23 January 2014 18:52:29 Magnus Damm wrote:
> On Wed, Jan 22, 2014 at 12:32 AM, Laurent Pinchart wrote:
> > Add DT bindings for the R-Car DU with support for core resources
> > (memory, IRQ and clocks). Output configuration must still be passed
> > through platform data using OF_DEV_AUXDATA.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > 
> >  .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 +++++++++-------
> > 2 files changed, 138 insertions(+), 72 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt
> 
> Hi Laurent,
> 
> Thanks for your patches. I have some minor comments related to r8a7790
> vs r8a7791, please see below.
> 
> > diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt
> > b/Documentation/devicetree/bindings/video/renesas,du.txt new file mode
> > 100644
> > index 0000000..6bd947c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/renesas,du.txt
> > @@ -0,0 +1,49 @@
> > +* Renesas R-Car Display Unit (DU)
> > +
> > +Required Properties:
> > +
> > +  - compatible: must be one of the following.
> > +    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> > +    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> > +    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU
> 
> I suppose the last line above should be "renesas,du-r8a7791", right?
> 
> > +  - reg: A list of base address and length of each memory resource, one
> > for
> > +    each entry in the reg-names property.
> > +  - reg-names: Name of the memory resources. The DU requires one memory
> > +    resource for the DU core (named "du") and one memory resource for
> > each
> > +    LVDS encoder (named "lvds.x" with "x" being the LVDS controller
> > numerical
> > +    index).
> > +
> > +  - interrupt-parent: phandle of the parent interrupt controller.
> > +  - interrupts: Interrupt specifiers for the DU interrupts.
> > +
> > +  - clocks: A list of phandles + clock-specifier pairs, one for each
> > entry in
> > +    the clock-names property.
> > +  - clock-names: Name of the clocks. This property is model-dependent.
> > +    - R8A7779 uses a single functional clock. The clock doesn't need to
> > be
> > +      named.
> > +    - R8A7790 and R8A7790 use one functional clock per channel and one
> > clock
> > +      per LVDS encoder. The functional clocks must be named "du.x" with
> > "x"
> > +      being the channel numerical index. The LVDS clocks must be named
> > +      "lvds.x" with "x" being the LVDS encoder numerical index.
> 
> "R8A7790 and R8A7791"...?

I'll fix both in the next version.

-- 
Regards,

Laurent Pinchart

Re: [RFC/PATCH 1/7] drm/rcar-du: Add OF support

[Laurent Pinchart]

Hi Magnus,

On Thursday 23 January 2014 18:52:29 Magnus Damm wrote:
> On Wed, Jan 22, 2014 at 12:32 AM, Laurent Pinchart wrote:
> > Add DT bindings for the R-Car DU with support for core resources
> > (memory, IRQ and clocks). Output configuration must still be passed
> > through platform data using OF_DEV_AUXDATA.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > 
> >  .../devicetree/bindings/video/renesas,du.txt       |  49 +++++++
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c              | 161 +++++++++-------
> > 2 files changed, 138 insertions(+), 72 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/video/renesas,du.txt
> 
> Hi Laurent,
> 
> Thanks for your patches. I have some minor comments related to r8a7790
> vs r8a7791, please see below.
> 
> > diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt
> > b/Documentation/devicetree/bindings/video/renesas,du.txt new file mode
> > 100644
> > index 0000000..6bd947c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/renesas,du.txt
> > @@ -0,0 +1,49 @@
> > +* Renesas R-Car Display Unit (DU)
> > +
> > +Required Properties:
> > +
> > +  - compatible: must be one of the following.
> > +    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> > +    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> > +    - "renesas,du-r8a7790" for R8A7791 (R-Car M2) compatible DU
> 
> I suppose the last line above should be "renesas,du-r8a7791", right?
> 
> > +  - reg: A list of base address and length of each memory resource, one
> > for
> > +    each entry in the reg-names property.
> > +  - reg-names: Name of the memory resources. The DU requires one memory
> > +    resource for the DU core (named "du") and one memory resource for
> > each
> > +    LVDS encoder (named "lvds.x" with "x" being the LVDS controller
> > numerical
> > +    index).
> > +
> > +  - interrupt-parent: phandle of the parent interrupt controller.
> > +  - interrupts: Interrupt specifiers for the DU interrupts.
> > +
> > +  - clocks: A list of phandles + clock-specifier pairs, one for each
> > entry in
> > +    the clock-names property.
> > +  - clock-names: Name of the clocks. This property is model-dependent.
> > +    - R8A7779 uses a single functional clock. The clock doesn't need to
> > be
> > +      named.
> > +    - R8A7790 and R8A7790 use one functional clock per channel and one
> > clock
> > +      per LVDS encoder. The functional clocks must be named "du.x" with
> > "x"
> > +      being the channel numerical index. The LVDS clocks must be named
> > +      "lvds.x" with "x" being the LVDS encoder numerical index.
> 
> "R8A7790 and R8A7791"...?

I'll fix both in the next version.

-- 
Regards,

Laurent Pinchart